diff options
92 files changed, 3523 insertions, 301 deletions
diff --git a/kubernetes/aaf/.helmignore b/kubernetes/aaf/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-cm/.helmignore b/kubernetes/aaf/charts/aaf-cm/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cm/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-cm/Chart.yaml b/kubernetes/aaf/charts/aaf-cm/Chart.yaml new file mode 100644 index 0000000000..00832d69e4 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cm/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF Certificate Manager +name: aaf-cm +version: 2.0.0
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cm/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml new file mode 100644 index 0000000000..652e2ac040 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cm/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: + - /root/ready.py + args: + - --container-name + - aaf-cs + - --container-name + - aaf-locate + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - env: + - name: CASSANDRA_CLUSTER + value: cassandra_container + name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/cm/bin/cm >> /opt/app/osaaf/logs/cm/stdout`date -I` 2>> /opt/app/osaaf/logs/cm/stderr`date -I`"] + volumeMounts: + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/templates/service.yaml b/kubernetes/aaf/charts/aaf-cm/templates/service.yaml index 587e07a821..281aa1cc8d 100644 --- a/kubernetes/aaf/templates/service.yaml +++ b/kubernetes/aaf/charts/aaf-cm/templates/service.yaml @@ -29,11 +29,11 @@ spec: #Example internal target port if required #targetPort: {{ .Values.service.internalPort }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.name }} + name: {{ .Values.service.portName }} {{- else -}} - port: {{ .Values.service.externalPort }} targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.name }} + name: {{ .Values.service.portName }} {{- end}} selector: app: {{ include "common.name" . }} diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml new file mode 100644 index 0000000000..75b1a7b564 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cm/values.yaml @@ -0,0 +1,86 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_cm:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-cm + type: ClusterIP + portName: aaf-cm + #targetPort + internalPort: 8150 + #port + externalPort: 8150 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql deleted file mode 100644 index 6fddf65001..0000000000 --- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/ecomp.cql +++ /dev/null @@ -1,169 +0,0 @@ -USE authz; - -// Create Root pass -INSERT INTO cred (id,ns,type,cred,expires) - VALUES ('dgl@openecomp.org','org.openecomp',1,0xab3831f27b39d7a039f9a92aa2bbfe51,'2020-12-31'); - -INSERT INTO cred (id,ns,type,cred,expires) - VALUES ('m99751@dmaapBC.openecomp.org','org.openecomp.dmaapBC',1,0xab3831f27b39d7a039f9a92aa2bbfe51,'2020-12-31'); - -INSERT INTO cred (id,ns,type,cred,expires) - VALUES ('m99501@dmaapBC.openecomp.org','org.openecomp.dmaapBC',1,0xab3831f27b39d7a039f9a92aa2bbfe51,'2020-12-31'); - - -// Create 'com' root NS -INSERT INTO ns (name,scope,description,parent,type) - VALUES('com',1,'Root Namespace',null,1); - -INSERT INTO role(ns, name, perms, description) - VALUES('com','admin',{'com.access|*|*'},'Com Admins'); - -INSERT INTO role(ns, name, perms, description) - VALUES('com','owner',{'com.access|*|read'},'Com Owners'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('com','access','*','read',{'com.owner'},'Com Read Access'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('com','access','*','*',{'com.admin'},'Com Write Access'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','com.owner','2020-12-31','com','owner'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','com.admin','2020-12-31','com','admin'); - -// Create org root NS -INSERT INTO ns (name,scope,description,parent,type) - VALUES('org',1,'Root Namespace Org',null,1); - -INSERT INTO ns (name,scope,description,parent,type) - VALUES('org.openecomp.dcae',3,'DCAE Namespace Org','org.openecomp',3); - -INSERT INTO ns (name,scope,description,parent,type) - VALUES('org.openecomp.dmaapBC',3,'DMaaP BC Namespace Org','org.openecomp',3); - -INSERT INTO role(ns, name, perms, description) - VALUES('org','admin',{'org.access|*|*'},'Com Admins'); - -INSERT INTO role(ns, name, perms, description) - VALUES('org','owner',{'org.access|*|read'},'Com Owners'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('org','access','*','read',{'org.owner'},'Com Read Access'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('org','access','*','*',{'org.admin'},'Com Write Access'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','org.owner','2020-12-31','org','owner'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','org.admin','2020-12-31','org','admin'); - - -// Create com.att - -INSERT INTO ns (name,scope,description,parent,type) - VALUES('com.att',2,'AT&T Namespace','com',2); - -INSERT INTO role(ns, name, perms,description) - VALUES('com.att','admin',{'com.att.access|*|*'},'AT&T Admins'); - -INSERT INTO role(ns, name, perms,description) - VALUES('com.att','owner',{'com.att.access|*|read'},'AT&T Owners'); - -INSERT INTO perm(ns, type, instance, action, roles,description) - VALUES ('com.att','access','*','read',{'com.att.owner'},'AT&T Read Access'); - -INSERT INTO perm(ns, type, instance, action, roles,description) - VALUES ('com.att','access','*','*',{'com.att.admin'},'AT&T Write Access'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','com.att.owner','2020-12-31','com.att','owner'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','com.att.admin','2020-12-31','com.att','admin'); - -// Create com.att.aaf - -INSERT INTO ns (name,scope,description,parent,type) - VALUES('com.att.aaf',3,'Application Authorization Framework','com.att',3); - -INSERT INTO role(ns, name, perms, description) - VALUES('com.att.aaf','admin',{'com.att.aaf.access|*|*'},'AAF Admins'); - -INSERT INTO role(ns, name, perms, description) - VALUES('com.att.aaf','owner',{'com.att.aaf.access|*|read'},'AAF Owners'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('com.att.aaf','access','*','read',{'com.att.aaf.owner'},'AAF Read Access'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('com.att.aaf','access','*','*',{'com.att.aaf.admin'},'AAF Write Access'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','com.att.aaf.admin','2020-12-31','com.att.aaf','admin'); -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','com.att.aaf.owner','2020-12-31','com.att.aaf','owner'); - - -// Create org.openecomp -INSERT INTO ns (name,scope,description,parent,type) - VALUES('org.openecomp',2,'Open EComp NS','com.att',2); - -INSERT INTO role(ns, name, perms, description) - VALUES('org.openecomp','admin',{'org.openecomp.access|*|*'},'OpenEcomp Admins'); - -INSERT INTO role(ns, name, perms, description) - VALUES('org.openecomp','owner',{'org.openecomp.access|*|read'},'OpenEcomp Owners'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('org.openecomp','access','*','read',{'org.openecomp.owner'},'OpenEcomp Read Access'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('org.openecomp','access','*','*',{'org.openecomp.admin'},'OpenEcomp Write Access'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','org.openecomp.admin','2020-12-31','org.openecomp','admin'); - -// Create org.openecomp.dmaapBC - -INSERT INTO ns (name,scope,description,parent,type) - VALUES('org.openecomp.dmaapBC',3,'Application Authorization Framework','org.openecomp',3); - -//INSERT INTO role(ns, name, perms, description) -// VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*'},'AAF Admins'); - -INSERT INTO role(ns, name, perms, description) -VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*','org.openecomp.dmaapBC.topicFactory|:org.openecomp.dmaapBC.topic:org.openecomp.dmaapBC|create','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|sub','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|pub'},'AAF Admins'); - -//INSERT INTO role(ns, name, perms, description) -//VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|sub'},'AAF Admins'); - -//INSERT INTO role(ns, name, perms, description) -//VALUES('org.openecomp.dmaapBC','admin',{'org.openecomp.dmaapBC.access|*|*','org.openecomp.dmaapBC.mr.topic|:topic.org.openecomp.dmaapBC.newtopic|pub'},'AAF Admins'); - - - -INSERT INTO role(ns, name, perms, description) - VALUES('org.openecomp.dmaapBC','owner',{'org.openecomp.dmaapBC.access|*|read'},'AAF Owners'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('org.openecomp.dmaapBC','access','*','read',{'org.openecomp.dmaapBC.owner'},'AAF Read Access'); - -INSERT INTO perm(ns, type, instance, action, roles, description) - VALUES ('org.openecomp.dmaapBC','access','*','*',{'org.openecomp.dmaapBC.admin'},'AAF Write Access'); - -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','org.openecomp.dmaapBC.admin','2020-12-31','org.openecomp.dmaapBC','admin'); -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('dgl@openecomp.org','org.openecomp.dmaapBC.owner','2020-12-31','org.openecomp.dmaapBC','owner'); -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('m99751@dmaapBC.openecomp.org','org.openecomp.dmaapBC.admin','2020-12-31','org.openecomp.dmaapBC','admin'); -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('m99751@dmaapBC.openecomp.org','org.openecomp.dmaapBC.owner','2020-12-31','org.openecomp.dmaapBC','owner'); -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('m99501@dmaapBC.openecomp.org','org.openecomp.dmaapBC.admin','2020-12-31','org.openecomp.dmaapBC','admin'); -INSERT INTO user_role(user,role,expires,ns,rname) - VALUES ('m99501@dmaapBC.openecomp.org','org.openecomp.dmaapBC.owner','2020-12-31','org.openecomp.dmaapBC','owner'); diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat deleted file mode 100644 index 98bf99a3d1..0000000000 --- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.dat +++ /dev/null @@ -1,7 +0,0 @@ -iowna|Ima D. Owner|Ima|Owner|314-123-2000|ima.d.owner@osaaf.com|e| -mmanager|Mark D. Manager|Mark|Manager|314-123-1234|mark.d.manager@osaaf.com|e|iowna -bdevl|Robert D. Developer|Bob|Developer|314-123-1235|bob.d.develper@osaaf.com|e|mmanager -mmarket|Mary D. Marketer|Mary|Marketer|314-123-1236|mary.d.marketer@osaaf.com|e|mmanager -ccontra|Clarice D. Contractor|Clarice|Contractor|314-123-1237|clarice.d.contractor@osaaf.com|c|mmanager -iretired|Ira Lee M. Retired|Ira|Retired|314-123-1238|clarice.d.contractor@osaaf.com|n|mmanager -osaaf|ID of AAF|||||a|bdevl diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idx b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idx Binary files differdeleted file mode 100644 index 78fc0a5693..0000000000 --- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/identities.idx +++ /dev/null diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql index 81700f830c..c06e5ee952 100644 --- a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql +++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/init.cql @@ -1,35 +1,6 @@ -// For Developer Machine single instance -// -CREATE KEYSPACE authz -WITH REPLICATION = {'class' : 'SimpleStrategy','replication_factor':1}; -// -// From Ravi, 6-17-2014. User for DEVL->TEST -// -// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'HYWRCA02': '2', 'BRHMALDC': '2' }; -// -// PROD -// -// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','ALPSGACT': '2','STLSMORC': '2','BRHMALDC': '2' }; -// -// create user authz with password '<AUTHZ PASSWORD>' superuser; -// grant all on keyspace authz to authz; -// -// For TEST (aaf_test) -// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'BRHMALDC': '1' }; -// -// DEVL -// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','STLSMORC': '2' }; -// -// TEST / PERF -// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','STLSMORC': '3','KGMTNC20': '3' }; -// -// IST -// CREATE KEYSPACE authz WITH replication = {'class': 'NetworkTopologyStrategy','STLSMORC':'3', -// 'DLLSTXCF':'3','KGMTNC20':'3','SFLDMIBB':'3','HYWRCA02':'3' }; -// -// with 6 localized with ccm -// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'dc1': '2', 'dc2': '2' }; -// + +// Table Initialization +// First make sure the keyspace exists. USE authz; @@ -51,12 +22,6 @@ CREATE TABLE ns ( ); CREATE INDEX ns_parent on ns(parent); - -// Oct 2015, not performant. Made Owner and Attrib first class Roles, -// April, 2015. Originally, the plan was to utilize Cassandra 2.1.2, however, other team's preferences were to remain at current levels. -// Therefore, we are taking the separate table approach. (coder Jeremiah Rohwedder) -// We had dropped this by making first class objects of Responsible (Owner) and Admin. We need this again to mark namespaces -// as having certain tools, like SWM, etc. CREATE TABLE ns_attrib ( ns varchar, key varchar, @@ -125,10 +90,10 @@ CREATE INDEX cert_id ON cert(id); CREATE INDEX cert_x500 ON cert(x500); CREATE TABLE notify ( - user text, - type int, - last timestamp, - checksum int, + user text, + type int, + last timestamp, + checksum int, PRIMARY KEY (user,type) ); @@ -155,14 +120,16 @@ CREATE TABLE artifact ( sponsor text, ca text, dir text, - appName text, os_user text, + ns text, notify text, expires timestamp, - renewDays int, + renewDays int, + sans Set<text>, PRIMARY KEY (mechid,machine) ); CREATE INDEX artifact_machine ON artifact(machine); +CREATE INDEX artifact_ns ON artifact(ns); // // Non-Critical Table functions @@ -216,6 +183,7 @@ CREATE TABLE approval ( status varchar, // approval status. pending, approved, denied memo varchar, // Text for Approval to know what's going on operation varchar, // List operation to perform + last_notified timestamp, // Timestamp for the last time approver was notified PRIMARY KEY(id) ); CREATE INDEX appr_approver_idx ON approval(approver); @@ -223,6 +191,19 @@ CREATE INDEX appr_user_idx ON approval(user); CREATE INDEX appr_ticket_idx ON approval(ticket); CREATE INDEX appr_status_idx ON approval(status); +CREATE TABLE approved ( + id timeuuid, // unique Key + user varchar, // the user who needs to be approved + approver varchar, // user approving + type varchar, // approver types i.e. Supervisor, Owner + status varchar, // approval status. pending, approved, denied + memo varchar, // Text for Approval to know what's going on + operation varchar, // List operation to perform + PRIMARY KEY(id) + ); +CREATE INDEX approved_approver_idx ON approved(approver); +CREATE INDEX approved_user_idx ON approved(user); + CREATE TABLE delegate ( user varchar, delegate varchar, @@ -231,6 +212,49 @@ CREATE TABLE delegate ( ); CREATE INDEX delg_delg_idx ON delegate(delegate); +// OAuth Tokens +CREATE TABLE oauth_token ( + id text, // Reference + client_id text, // Creating Client ID + user text, // User requesting + active boolean, // Active or not + type int, // Type of Token + refresh text, // Refresh Token + expires timestamp, // Expiration time/Date (signed long) + exp_sec bigint, // Seconds from Jan 1, 1970 + content text, // Content of Token + scopes Set<text>, // Scopes + state text, // Context string (Optional) + req_ip text, // Requesting IP (for logging purpose) + PRIMARY KEY(id) +) with default_time_to_live = 21600; // 6 hours +CREATE INDEX oauth_token_user_idx ON oauth_token(user); + +CREATE TABLE locate ( + name text, // Component/Server name + hostname text, // FQDN of Service/Component + port int, // Port of Service + major int, // Version, Major + minor int, // Version, Minor + patch int, // Version, Patch + pkg int, // Version, Package (if available) + latitude float, // Latitude + longitude float, // Longitude + protocol text, // Protocol (i.e. http https) + subprotocol set<text>, // Accepted SubProtocols, ie. TLS1.1 for https + port_key uuid, // Key into locate_ports + PRIMARY KEY(name,hostname,port) +) with default_time_to_live = 1200; // 20 mins + +CREATE TABLE locate_ports ( + id uuid, // Id into locate + port int, // SubPort + name text, // Name of Other Port + protocol text, // Protocol of Other (i.e. JMX, DEBUG) + subprotocol set<text>, // Accepted sub protocols or versions + PRIMARY KEY(id, port) +) with default_time_to_live = 1200; // 20 mins; + // // Used by authz-batch processes to ensure only 1 runs at a time // diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql new file mode 100644 index 0000000000..52dc5ea77e --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/keyspace.cql @@ -0,0 +1,11 @@ +// For Developer Machine single instance +// CREATE KEYSPACE authz +// WITH REPLICATION = {'class' : 'SimpleStrategy','replication_factor':1}; +// +// + +// Example of Network Topology, with Datacenter dc1 & dc2 +// CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'dc1': '2', 'dc2': '2' }; +// Out of the box Docker Cassandra comes with "datacenter1", one instance +CREATE KEYSPACE authz WITH replication = { 'class': 'NetworkTopologyStrategy', 'datacenter1': '1' }; +// diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql new file mode 100644 index 0000000000..e7385ab69d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/osaaf.cql @@ -0,0 +1,122 @@ +USE authz; + +// Create 'org' root NS +INSERT INTO ns (name,description,parent,scope,type) + VALUES('org','Root Namespace','.',1,1); + +INSERT INTO role(ns, name, perms, description) + VALUES('org','admin',{'org.access|*|*'},'Org Admins'); + +INSERT INTO role(ns, name, perms, description) + VALUES('org','owner',{'org.access|*|read,approve'},'Org Owners'); + +INSERT INTO perm(ns, type, instance, action, roles, description) + VALUES ('org','access','*','read,approve',{'org.owner'},'Org Read Access'); + +INSERT INTO perm(ns, type, instance, action, roles, description) + VALUES ('org','access','*','*',{'org.admin'},'Org Write Access'); + +// Create Root pass +INSERT INTO cred (id,ns,type,cred,expires) + VALUES ('initial@osaaf.org','org.osaaf',1,0x008c5926ca861023c1d2a36653fd88e2,'2099-12-31') using TTL 14400; + +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('initial@osaaf.org','org.admin','2099-12-31','org','admin') using TTL 14400; + + +// Create org.osaaf +INSERT INTO ns (name,description,parent,scope,type) + VALUES('org.osaaf','OSAAF Namespace','org',2,2); + +INSERT INTO role(ns, name, perms,description) + VALUES('org.osaaf','admin',{'org.osaaf.access|*|*'},'OSAAF Admins'); + +INSERT INTO perm(ns, type, instance, action, roles,description) + VALUES ('org.osaaf','access','*','*',{'org.osaaf.admin'},'OSAAF Write Access'); + +INSERT INTO role(ns, name, perms,description) + VALUES('org.osaaf','owner',{'org.osaaf.access|*|read,approve'},'OSAAF Owners'); + +INSERT INTO perm(ns, type, instance, action, roles,description) + VALUES ('org.osaaf','access','*','read,appove',{'org.osaaf.owner'},'OSAAF Read Access'); + +// Create org.osaaf.aaf +INSERT INTO ns (name,description,parent,scope,type) + VALUES('org.osaaf.aaf','Application Authorization Framework','org.osaaf',3,3); + +INSERT INTO role(ns, name, perms, description) + VALUES('org.osaaf.aaf','admin',{'org.osaaf.aaf.access|*|*'},'AAF Admins'); + +INSERT INTO perm(ns, type, instance, action, roles, description) + VALUES ('org.osaaf.aaf','access','*','*',{'org.osaaf.aaf.admin'},'AAF Write Access'); + +INSERT INTO perm(ns, type, instance, action, roles, description) + VALUES ('org.osaaf.aaf','access','*','read,approve',{'org.osaaf.aaf.owner'},'AAF Read Access'); + +INSERT INTO role(ns, name, perms, description) + VALUES('org.osaaf.aaf','owner',{'org.osaaf.aaf.access|*|read,approve'},'AAF Owners'); + +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('initial@osaaf.org','org.osaaf.aaf.admin','2099-12-31','org.osaaf.aaf','admin') using TTL 14400; + + +// ONAP Specific Entities +// ONAP initial env Namespace +INSERT INTO ns (name,description,parent,scope,type) + VALUES('org.onap','ONAP','org',2,2); + +INSERT INTO ns (name,description,parent,scope,type) + VALUES('org.onap.portal','ONAP Portal','org.onap.portal',3,3); + +INSERT INTO perm(ns, type, instance, action, roles, description) + VALUES ('org.onap.portal','access','*','read',{ + 'org.onap.portal.owner','org.onap.portal.designer','org.onap.portal.tester','org.onap.portal.ops','org.onap.portal.governor' + },'Portal Read Access'); + +INSERT INTO role(ns, name, perms, description) + VALUES('org.onap.portal','owner',{'org.onap.portal.access|*|read'},'Portal Owner'); + +INSERT INTO perm(ns, type, instance, action, roles, description) + VALUES ('org.onap.portal','access','*','*',{'org.onap.portal.admin'},'Portal Write Access'); + +INSERT INTO role(ns, name, perms, description) + VALUES('org.onap.portal','admin',{'org.onap.portal.access|*|*'},'Portal Admins'); + +// DEMO ID (OPS) +insert into cred (id,type,expires,cred,notes,ns,other) values('demo@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344); +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('demo@people.osaaf.org','org.onap.portal.admin','2018-10-31','org.onap.portal','admin'); + +// ADMIN +insert into cred (id,type,expires,cred,notes,ns,other) values('jh0003@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344); +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('jh0003@people.osaaf.org','org.onap.portal.admin','2018-10-31','org.onap.portal','admin'); + +// DESIGNER +INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('cs0008@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344); +INSERT INTO role(ns, name, perms, description) + VALUES('org.onap.portal','designer',{'org.onap.portal.access|*|read'},'Portal Designer'); +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('cs0008@people.osaaf.org','org.onap.portal.designer','2018-10-31','org.onap.portal','designer'); + +// TESTER +INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('jm0007@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344); +INSERT INTO role(ns, name, perms, description) + VALUES('org.onap.portal','tester',{'org.onap.portal.access|*|read'},'Portal Tester'); +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('jm0007@people.osaaf.org','org.onap.portal.tester','2018-10-31','org.onap.portal','tester'); + +// OPS +INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('op0001@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344); +INSERT INTO role(ns, name, perms, description) + VALUES('org.onap.portal','ops',{'org.onap.portal.access|*|read'},'Portal Operations'); +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('op0001@people.osaaf.org','org.onap.portal.ops','2018-10-31','org.onap.portal','ops'); + +// GOVERNOR +INSERT INTO cred (id,type,expires,cred,notes,ns,other) values('gv0001@people.osaaf.org',2,'2019-05-01',0xd993c5617486296f1b99d04de31633332b8ba1a550038e23860f9dbf0b2fcf95,'Initial ID','org.osaaf.people',53344); +INSERT INTO role(ns, name, perms, description) + VALUES('org.onap.portal','governor',{'org.onap.portal.access|*|read'},'Portal Governor'); +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('gv0001@people.osaaf.org','org.onap.portal.governor','2018-10-31','org.onap.portal','governor'); + diff --git a/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql new file mode 100644 index 0000000000..5e7cfe1741 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cs/resources/config/aaf-cs-data/temp_identity.cql @@ -0,0 +1,8 @@ +USE authz; + +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('demo@people.osaaf.org','org.admin','2099-12-31','org','admin') ; + +INSERT INTO user_role(user,role,expires,ns,rname) + VALUES ('demo@people.osaaf.org','org.osaaf.aaf.admin','2099-12-31','org.osaaf.aaf','admin') ; + diff --git a/kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-cs/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml index 15e574f511..4253d2fb71 100644 --- a/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml +++ b/kubernetes/aaf/charts/aaf-cs/templates/deployment.yaml @@ -24,14 +24,11 @@ metadata: heritage: {{ .Release.Service }} spec: replicas: {{ .Values.replicaCount }} - selector: - matchLabels: - app: {{ include "common.name" . }} template: metadata: labels: app: {{ include "common.name" . }} - name: {{ .Release.Name }} + release: {{ .Release.Name }} spec: hostname: {{ include "common.name" . }} containers: @@ -39,24 +36,45 @@ spec: image: "{{ include "common.repository" . }}/{{ .Values.image }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} name: {{ include "common.name" . }} + ports: + - containerPort: {{ .Values.service.externalPort }} + - containerPort: {{ .Values.service.externalPort2 }} + - containerPort: {{ .Values.service.externalPort3 }} + - containerPort: {{ .Values.service.externalPort4 }} volumeMounts: - mountPath: /data name: aaf-cs-data + - mountPath: /etc/localtime + name: localtime + readOnly: true # disable liveness probe when breakpoints set in debugger # so K8s doesn't restart unresponsive container {{- if eq .Values.liveness.enabled true }} livenessProbe: tcpSocket: - port: {{ .Values.service.internalPort }} + port: {{ .Values.service.internalPort3 }} initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} periodSeconds: {{ .Values.liveness.periodSeconds }} {{ end -}} readinessProbe: tcpSocket: - port: {{ .Values.service.internalPort }} + port: {{ .Values.service.internalPort3 }} initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} - resources: + lifecycle: + postStart: + exec: + command: + - /bin/sh + - -c + - > + /bin/sleep 30; + cd /data/; + cqlsh -u root -p root -f keyspace.cql ; + cqlsh -u root -p root -f init.cql ; + cqlsh -u root -p root -f osaaf.cql ; + cqlsh -u root -p root -f temp_identity.cql + resources: {{ toYaml .Values.resources | indent 12 }} {{- if .Values.nodeSelector }} nodeSelector: @@ -66,8 +84,10 @@ spec: affinity: {{ toYaml .Values.affinity | indent 10 }} {{- end }} - volumes: + - name: localtime + hostPath: + path: /etc/localtime - name: aaf-cs-data secret: secretName: {{ include "common.fullname" . }} diff --git a/kubernetes/aaf/charts/aaf-cs/templates/service.yaml b/kubernetes/aaf/charts/aaf-cs/templates/service.yaml index 2e4a619a20..b1716e4936 100644 --- a/kubernetes/aaf/charts/aaf-cs/templates/service.yaml +++ b/kubernetes/aaf/charts/aaf-cs/templates/service.yaml @@ -22,6 +22,8 @@ metadata: chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} release: {{ .Release.Name }} heritage: {{ .Release.Service }} +# annotations: +# service.alpha.kubernetes.io/tolerate-unready-endpoints: "true" spec: type: {{ .Values.service.type }} ports: @@ -30,29 +32,29 @@ spec: #Example internal target port if required #targetPort: {{ .Values.service.internalPort }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - name: {{ .Values.service.name }} + name: {{ .Values.service.portName }} - port: {{ .Values.service.externalPort2 }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }} - name: {{ .Values.service.name }}2 + name: {{ .Values.service.portName }}2 - port: {{ .Values.service.externalPort3 }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }} - name: {{ .Values.service.name }}3 + name: {{ .Values.service.portName }}3 - port: {{ .Values.service.externalPort4 }} nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort4 }} - name: {{ .Values.service.name }}4 + name: {{ .Values.service.portName }}4 {{- else -}} - port: {{ .Values.service.externalPort }} targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.name }} + name: {{ .Values.service.portName }} - port: {{ .Values.service.externalPort2 }} targetPort: {{ .Values.service.internalPort2 }} - name: {{ .Values.service.name }}2 + name: {{ .Values.service.portName }}2 - port: {{ .Values.service.externalPort3 }} targetPort: {{ .Values.service.internalPort3 }} - name: {{ .Values.service.name }}3 + name: {{ .Values.service.portName }}3 - port: {{ .Values.service.externalPort4 }} targetPort: {{ .Values.service.internalPort4 }} - name: {{ .Values.service.name }}4 + name: {{ .Values.service.portName }}4 {{- end}} selector: app: {{ include "common.name" . }} diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml index 89b83cd169..83bc972fd8 100644 --- a/kubernetes/aaf/charts/aaf-cs/values.yaml +++ b/kubernetes/aaf/charts/aaf-cs/values.yaml @@ -25,7 +25,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: library/cassandra:2.1.17 +image: library/cassandra:3.11 pullPolicy: Always # flag to enable debugging - application support required @@ -54,8 +54,9 @@ readiness: periodSeconds: 10 service: + name: aaf-cass type: ClusterIP - name: aaf-cs + portName: aaf-cs #targetPort internalPort: 7000 #port diff --git a/kubernetes/aaf/charts/aaf-fs/.helmignore b/kubernetes/aaf/charts/aaf-fs/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-fs/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-fs/Chart.yaml b/kubernetes/aaf/charts/aaf-fs/Chart.yaml new file mode 100644 index 0000000000..6b0fdcb6fd --- /dev/null +++ b/kubernetes/aaf/charts/aaf-fs/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF File Server +name: aaf-fs +version: 2.0.0
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-fs/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml new file mode 100644 index 0000000000..0bbd6a5a36 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-fs/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: + - /root/ready.py + args: + - --container-name + - aaf-cs + - --container-name + - aaf-locate + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - env: + - name: CASSANDRA_CLUSTER + value: cassandra_container + name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c","echo hello >> /opt/app/osaaf/logs/fs/stdout`date -I`;ln -s /opt/app/osaaf/data /data;/opt/app/aaf/fs/bin/fs >> /opt/app/osaaf/logs/fs/stdout`date -I` 2>> /opt/app/osaaf/logs/fs/stderr`date -I`"] + volumeMounts: + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/charts/aaf-fs/templates/service.yaml b/kubernetes/aaf/charts/aaf-fs/templates/service.yaml new file mode 100644 index 0000000000..281aa1cc8d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-fs/templates/service.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + type: {{ .Values.service.type }} diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml new file mode 100644 index 0000000000..be0f53d566 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-fs/values.yaml @@ -0,0 +1,86 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_fs:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-fs + type: ClusterIP + portName: aaf-fs + #targetPort + internalPort: 8096 + #port + externalPort: 8096 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-gui/.helmignore b/kubernetes/aaf/charts/aaf-gui/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-gui/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-gui/Chart.yaml b/kubernetes/aaf/charts/aaf-gui/Chart.yaml new file mode 100644 index 0000000000..d0aea0b0e0 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-gui/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF GUI +name: aaf-gui +version: 2.0.0
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-gui/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml new file mode 100644 index 0000000000..ee503caceb --- /dev/null +++ b/kubernetes/aaf/charts/aaf-gui/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: + - /root/ready.py + args: + - --container-name + - aaf-cs + - --container-name + - aaf-locate + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - env: + - name: CASSANDRA_CLUSTER + value: cassandra_container + name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/gui/bin/gui >> /opt/app/osaaf/logs/gui/stdout`date -I` 2>> /opt/app/osaaf/logs/gui/stderr`date -I`"] + volumeMounts: + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/charts/aaf-gui/templates/service.yaml b/kubernetes/aaf/charts/aaf-gui/templates/service.yaml new file mode 100644 index 0000000000..281aa1cc8d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-gui/templates/service.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + type: {{ .Values.service.type }} diff --git a/kubernetes/aaf/charts/aaf-gui/values.yaml b/kubernetes/aaf/charts/aaf-gui/values.yaml new file mode 100644 index 0000000000..02c572fe88 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-gui/values.yaml @@ -0,0 +1,87 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_gui:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-gui + type: NodePort + portName: aaf-gui + #targetPort + internalPort: 8200 + #port + externalPort: 8200 + nodePort: 51 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-hello/.helmignore b/kubernetes/aaf/charts/aaf-hello/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-hello/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-hello/Chart.yaml b/kubernetes/aaf/charts/aaf-hello/Chart.yaml new file mode 100644 index 0000000000..c4029ba80f --- /dev/null +++ b/kubernetes/aaf/charts/aaf-hello/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF Hello +name: aaf-hello +version: 2.0.0
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-hello/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml new file mode 100644 index 0000000000..b47d878f25 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-hello/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: + - /root/ready.py + args: + - --container-name + - aaf-cs + - --container-name + - aaf-locate + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - env: + - name: CASSANDRA_CLUSTER + value: cassandra_container + name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/hello/bin/hello >> /opt/app/osaaf/logs/hello/stdout`date -I` 2>> /opt/app/osaaf/logs/hello/stderr`date -I`"] + volumeMounts: + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/charts/aaf-hello/templates/service.yaml b/kubernetes/aaf/charts/aaf-hello/templates/service.yaml new file mode 100644 index 0000000000..281aa1cc8d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-hello/templates/service.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + type: {{ .Values.service.type }} diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml new file mode 100644 index 0000000000..ad95b071c1 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-hello/values.yaml @@ -0,0 +1,86 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_hello:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-hello + type: ClusterIP + portName: aaf-hello + #targetPort + internalPort: 8130 + #port + externalPort: 8130 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-locate/.helmignore b/kubernetes/aaf/charts/aaf-locate/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-locate/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-locate/Chart.yaml b/kubernetes/aaf/charts/aaf-locate/Chart.yaml new file mode 100644 index 0000000000..db50ec392a --- /dev/null +++ b/kubernetes/aaf/charts/aaf-locate/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF Locate +name: aaf-locate +version: 2.0.0
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-locate/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-locate/templates/deployment.yaml index 2a4e7d2348..de5a46ec5b 100644 --- a/kubernetes/aaf/templates/deployment.yaml +++ b/kubernetes/aaf/charts/aaf-locate/templates/deployment.yaml @@ -24,17 +24,28 @@ metadata: namespace: {{ include "common.namespace" . }} spec: replicas: {{ .Values.replicaCount }} - selector: - matchLabels: - app: {{ include "common.name" . }} template: metadata: labels: app: {{ include "common.name" . }} - name: {{ include "common.fullname" . }} + release: {{ .Release.Name }} spec: initContainers: - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: - /root/ready.py args: - --container-name @@ -52,12 +63,16 @@ spec: - env: - name: CASSANDRA_CLUSTER value: cassandra_container + name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/locate/bin/locate >> /opt/app/osaaf/logs/locate/stdout`date -I` 2>> /opt/app/osaaf/logs/locate/stderr`date -I`"] volumeMounts: - - mountPath: /data - name: aaf-data - name: {{ include "common.name" . }} + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true # disable liveness probe when breakpoints set in debugger # so K8s doesn't restart unresponsive container {{- if eq .Values.liveness.enabled true }} @@ -82,10 +97,16 @@ spec: affinity: {{ toYaml .Values.affinity | indent 10 }} {{- end }} - volumes: - - name: aaf-data - configMap: - name: {{ include "common.fullname" . }} + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/charts/aaf-locate/templates/service.yaml b/kubernetes/aaf/charts/aaf-locate/templates/service.yaml new file mode 100644 index 0000000000..281aa1cc8d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-locate/templates/service.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + type: {{ .Values.service.type }} diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml new file mode 100644 index 0000000000..fbed947ca0 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-locate/values.yaml @@ -0,0 +1,90 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + +# If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines. +# persistence: +# mountPath: /dockerdata + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_locate:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-locate + type: ClusterIP + portName: aaf-locate + #targetPort + internalPort: 8095 + #port + externalPort: 8095 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-oauth/.helmignore b/kubernetes/aaf/charts/aaf-oauth/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-oauth/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/aaf/charts/aaf-oauth/Chart.yaml b/kubernetes/aaf/charts/aaf-oauth/Chart.yaml new file mode 100644 index 0000000000..bcb135b1e0 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-oauth/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF OAuth +name: aaf-oauth +version: 2.0.0
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt b/kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt new file mode 100644 index 0000000000..c60c745ca3 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-oauth/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml new file mode 100644 index 0000000000..00d6ee0e59 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-oauth/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: + - /root/ready.py + args: + - --container-name + - aaf-cs + - --container-name + - aaf-locate + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - env: + - name: CASSANDRA_CLUSTER + value: cassandra_container + name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/oauth/bin/oauth >> /opt/app/osaaf/logs/oauth/stdout`date -I` 2>> /opt/app/osaaf/logs/oauth/stderr`date -I`"] + volumeMounts: + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/charts/aaf-oauth/templates/service.yaml b/kubernetes/aaf/charts/aaf-oauth/templates/service.yaml new file mode 100644 index 0000000000..281aa1cc8d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-oauth/templates/service.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + type: {{ .Values.service.type }} diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml new file mode 100644 index 0000000000..43116965be --- /dev/null +++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml @@ -0,0 +1,86 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:1.1.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_oauth:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-oauth + type: ClusterIP + portName: aaf-oauth + #targetPort + internalPort: 8140 + #port + externalPort: 8140 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-service/Chart.yaml b/kubernetes/aaf/charts/aaf-service/Chart.yaml new file mode 100644 index 0000000000..3461f1add1 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-service/Chart.yaml @@ -0,0 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +description: ONAP AAF Service +name: aaf-service +version: 2.0.0 diff --git a/kubernetes/aaf/charts/aaf-service/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-service/templates/deployment.yaml new file mode 100644 index 0000000000..9fd6eba534 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-service/templates/deployment.yaml @@ -0,0 +1,114 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/job_complete.py + args: + - -j + - {{ .Release.Name }}-aaf-create-config + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-job-complete + - command: + - /root/ready.py + args: + - --container-name + - aaf-cs + - --container-name + - aaf-locate + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - env: + - name: CASSANDRA_CLUSTER + value: cassandra_container + name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: ["/bin/bash","-c"," ln -s /opt/app/osaaf/data /data;/opt/app/aaf/service/bin/service >> /opt/app/osaaf/logs/service/stdout`date -I` 2>> /opt/app/osaaf/logs/service/stderr`date -I`"] + volumeMounts: + - mountPath: /opt/app/osaaf + name: aaf-persistent-vol + - mountPath: /etc/localtime + name: localtime + readOnly: true + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-persistent-vol + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/charts/aaf-service/templates/service.yaml b/kubernetes/aaf/charts/aaf-service/templates/service.yaml new file mode 100644 index 0000000000..281aa1cc8d --- /dev/null +++ b/kubernetes/aaf/charts/aaf-service/templates/service.yaml @@ -0,0 +1,41 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + #Example internal target port if required + #targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.portName }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.portName }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + type: {{ .Values.service.type }} diff --git a/kubernetes/aaf/charts/aaf-service/values.yaml b/kubernetes/aaf/charts/aaf-service/values.yaml new file mode 100644 index 0000000000..33c1644154 --- /dev/null +++ b/kubernetes/aaf/charts/aaf-service/values.yaml @@ -0,0 +1,87 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefix: 302 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/aaf/aaf_service:2.1.0-SNAPSHOT +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: {} + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + name: aaf-service + type: NodePort + portName: aaf-service + #targetPort + internalPort: 8100 + #port + externalPort: 8100 + nodePort: 50 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml index 26f03044ac..ddfc7c61d0 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml @@ -75,4 +75,5 @@ spec: - name: localtime hostPath: path: /etc/localtime - + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml index 07b8c33226..53e7286583 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml @@ -21,10 +21,10 @@ global: persistence: {} # application image -repository: docker.io +repository: nexus3.onap.org:10001 image: - consul: consul:1.0.6 - vault: vault:0.10.0 + consul: library/consul:1.0.6 + vault: library/vault:0.10.0 pullPolicy: Always # flag to enable debugging - application support required diff --git a/kubernetes/aaf/requirements.yaml b/kubernetes/aaf/requirements.yaml index fb4321ded6..1e8f788318 100644 --- a/kubernetes/aaf/requirements.yaml +++ b/kubernetes/aaf/requirements.yaml @@ -1,7 +1,18 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + dependencies: - name: common version: ~2.0.0 - # local reference to common chart, as it is - # a part of this chart's package and will not - # be published independently to a repo (at this point) - repository: '@local' + repository: '@local'
\ No newline at end of file diff --git a/kubernetes/aaf/resources/config/aaf-data/identities.dat b/kubernetes/aaf/resources/config/aaf-data/identities.dat deleted file mode 100644 index 95eb51d1be..0000000000 --- a/kubernetes/aaf/resources/config/aaf-data/identities.dat +++ /dev/null @@ -1,9 +0,0 @@ -iowna|Ima D. Owner|Ima|Owner|314-123-2000|ima.d.owner@osaaf.com|e| -mmanager|Mark D. Manager|Mark|Manager|314-123-1234|mark.d.manager@osaaf.com|e|iowna -bdevl|Robert D. Developer|Bob|Developer|314-123-1235|bob.d.develper@osaaf.com|e|mmanager -mmarket|Mary D. Marketer|Mary|Marketer|314-123-1236|mary.d.marketer@osaaf.com|e|mmanager -ccontra|Clarice D. Contractor|Clarice|Contractor|314-123-1237|clarice.d.contractor@osaaf.com|c|mmanager -iretired|Ira Lee M. Retired|Ira|Retired|314-123-1238|clarice.d.contractor@osaaf.com|n|mmanager -osaaf|ID of AAF|||||a|bdevl -m99751|ID of AAF|||||a|bdevl -m99501|ID of AAF|||||a|bdevl diff --git a/kubernetes/aaf/resources/config/backup/backup.sh b/kubernetes/aaf/resources/config/backup/backup.sh new file mode 100644 index 0000000000..1359d3de83 --- /dev/null +++ b/kubernetes/aaf/resources/config/backup/backup.sh @@ -0,0 +1,32 @@ +# BEGIN Store prev +BD=/opt/app/osaaf/backup +if [ -e "$BD/6day" ]; then + rm -Rf $BD/6day +fi + +PREV=$BD/6day +for D in $BD/5day $BD/4day $BD/3day $BD/2day $BD/yesterday; do + if [ -e "$D" ]; then + mv "$D" "$PREV" + fi + PREV="$D" +done + +if [ -e "$BD/today" ]; then + if [ -e "$BD/backup.log" ]; then + mv $BD/backup.log $BD/today + fi + gzip $BD/today/* + mv $BD/today $BD/yesterday +fi + +mkdir $BD/today + +# END Store prev +date +docker exec -t aaf_cass bash -c "mkdir -p /opt/app/cass_backup" +docker container cp $BD/cbackup.sh aaf_cass:/opt/app/cass_backup/backup.sh +# echo "login as Root, then run \nbash /opt/app/cass_backup/backup.sh" +docker exec -t aaf_cass bash /opt/app/cass_backup/backup.sh +docker container cp aaf_cass:/opt/app/cass_backup/. $BD/today +date diff --git a/kubernetes/aaf/resources/config/backup/cbackup.sh b/kubernetes/aaf/resources/config/backup/cbackup.sh new file mode 100644 index 0000000000..9c91d0c670 --- /dev/null +++ b/kubernetes/aaf/resources/config/backup/cbackup.sh @@ -0,0 +1,8 @@ +cd /opt/app/cass_backup +DATA="ns role perm ns_attrib user_role cred cert x509 delegate approval approved future notify artifact health history" +PWD=cassandra +CQLSH="cqlsh -u cassandra -k authz -p $PWD" +for T in $DATA ; do + echo "Creating $T.dat" + $CQLSH -e "COPY authz.$T TO '$T.dat' WITH DELIMITER='|'" +done diff --git a/kubernetes/aaf/resources/config/data/identities.dat b/kubernetes/aaf/resources/config/data/identities.dat new file mode 100644 index 0000000000..39d18a12b9 --- /dev/null +++ b/kubernetes/aaf/resources/config/data/identities.dat @@ -0,0 +1,27 @@ +# +# Sample Identities.dat +# This file is for use with the "Default Organization". It is a simple mechanism to have a basic ILM structure to use with +# out-of-the-box tire-kicking, or even for Small companies +# +# For Larger Companies, you will want to create a new class implementing the "Organization" interface, making calls to your ILM, or utilizing +# batch feeds, as is appropriate for your company. +# +# Example Field Layout. note, in this example, Application IDs and People IDs are mixed. You may want to split +# out AppIDs, choose your own status indicators, or whatever you use. +# 0 - unique ID +# 1 - full name +# 2 - first name +# 3 - last name +# 4 - phone +# 5 - official email +# 6 - employment status e=employee, c=contractor, a=application, n=no longer with company +# 7 - responsible to (i.e Supervisor for People, or AppOwner, if it's an App ID) +# + +iowna|Ima D. Owner|Ima|Owner|314-123-2000|ima.d.owner@osaaf.com|e| +mmanager|Mark D. Manager|Mark|Manager|314-123-1234|mark.d.manager@osaaf.com|e|iowna +bdevl|Robert D. Developer|Bob|Developer|314-123-1235|bob.d.develper@osaaf.com|e|mmanager +mmarket|Mary D. Marketer|Mary|Marketer|314-123-1236|mary.d.marketer@osaaf.com|e|mmanager +ccontra|Clarice D. Contractor|Clarice|Contractor|314-123-1237|clarice.d.contractor@osaaf.com|c|mmanager +iretired|Ira Lee M. Retired|Ira|Retired|314-123-1238|clarice.d.contractor@osaaf.com|n|mmanager +osaaf|ID of AAF|||||a|bdevl diff --git a/kubernetes/aaf/resources/config/data/sample.identities.dat b/kubernetes/aaf/resources/config/data/sample.identities.dat new file mode 100644 index 0000000000..39d18a12b9 --- /dev/null +++ b/kubernetes/aaf/resources/config/data/sample.identities.dat @@ -0,0 +1,27 @@ +# +# Sample Identities.dat +# This file is for use with the "Default Organization". It is a simple mechanism to have a basic ILM structure to use with +# out-of-the-box tire-kicking, or even for Small companies +# +# For Larger Companies, you will want to create a new class implementing the "Organization" interface, making calls to your ILM, or utilizing +# batch feeds, as is appropriate for your company. +# +# Example Field Layout. note, in this example, Application IDs and People IDs are mixed. You may want to split +# out AppIDs, choose your own status indicators, or whatever you use. +# 0 - unique ID +# 1 - full name +# 2 - first name +# 3 - last name +# 4 - phone +# 5 - official email +# 6 - employment status e=employee, c=contractor, a=application, n=no longer with company +# 7 - responsible to (i.e Supervisor for People, or AppOwner, if it's an App ID) +# + +iowna|Ima D. Owner|Ima|Owner|314-123-2000|ima.d.owner@osaaf.com|e| +mmanager|Mark D. Manager|Mark|Manager|314-123-1234|mark.d.manager@osaaf.com|e|iowna +bdevl|Robert D. Developer|Bob|Developer|314-123-1235|bob.d.develper@osaaf.com|e|mmanager +mmarket|Mary D. Marketer|Mary|Marketer|314-123-1236|mary.d.marketer@osaaf.com|e|mmanager +ccontra|Clarice D. Contractor|Clarice|Contractor|314-123-1237|clarice.d.contractor@osaaf.com|c|mmanager +iretired|Ira Lee M. Retired|Ira|Retired|314-123-1238|clarice.d.contractor@osaaf.com|n|mmanager +osaaf|ID of AAF|||||a|bdevl diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.cm.props b/kubernetes/aaf/resources/config/etc/org.osaaf.cm.props new file mode 100644 index 0000000000..d634cfeb37 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.cm.props @@ -0,0 +1,14 @@ +## +## org.osaaf.cm.props +## AAF Certificate Manager properties +## Note: Link to CA Properties in "local" dir +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props:/opt/app/osaaf/local/org.osaaf.cassandra.props:/opt/app/osaaf/local/org.osaaf.cm.ca.props +aaf_component=AAF_NS.cm:2.1.0.0 +port=8150 +cadi_registration_hostname={{.Values.config.cmServiceName}} +#Certman +cm_public_dir=/opt/app/osaaf/public +cm_trust_cas=AAF_RootCA.cer + + diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.common.props b/kubernetes/aaf/resources/config/etc/org.osaaf.common.props new file mode 100644 index 0000000000..8b75e709d4 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.common.props @@ -0,0 +1,29 @@ +############################################################ +# Common properties for all AAF Components +# on 2018-03-02 06:59.628-0500 +############################################################ +# Pull in Global Coordinates and Certificate Information +aaf_root_ns=org.osaaf.aaf +aaf_trust_perm=org.osaaf.aaf|org.onap|trust + +cadi_prop_files=/opt/app/osaaf/local/org.osaaf.location.props:/opt/app/osaaf/local/org.osaaf.aaf.props +cadi_protocols=TLSv1.1,TLSv1.2 + +aaf_url=https://AAF_LOCATE_URL/AAF_NS.service:2.0 +cadi_loginpage_url=https://AAF_LOCATE_URL/AAF_NS.gui:2.0/login + +# Standard for this App/Machine +aaf_env=DEV +aaf_data_dir=/opt/app/osaaf/data +cadi_loglevel=DEBUG + +# Domain Support (which will accept) +aaf_domain_support=.com:.org + +# Basic Auth +aaf_default_realm=people.osaaf.org + +# OAuth2 +aaf_oauth2_token_url=https://AAF_LOCATE_URL/AAF_NS.token:2.0/token +aaf_oauth2_introspect_url=https://AAF_LOCATE_URL/AAF_NS.introspect:2.0/introspect + diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.fs.props b/kubernetes/aaf/resources/config/etc/org.osaaf.fs.props new file mode 100644 index 0000000000..d499f97f56 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.fs.props @@ -0,0 +1,10 @@ +## +## org.osaaf.locator +## AAF Locator Properties +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props +aaf_component=AAF_NS.fs:2.1.0.0 +port=8096 +cadi_registration_hostname={{.Values.config.fsServiceName}} + +aaf_public_dir=/opt/app/osaaf/public diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.gui.props b/kubernetes/aaf/resources/config/etc/org.osaaf.gui.props new file mode 100644 index 0000000000..86b3aa6467 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.gui.props @@ -0,0 +1,31 @@ +## +## org.osaaf.locator +## AAF Locator Properties +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props:/opt/app/osaaf/etc/org.osaaf.orgs.props +aaf_component=AAF_NS.gui:2.1.0.0 +port=8200 +cadi_registration_hostname={{.Values.config.guiServiceName}} + +aaf_gui_title=AAF +aaf_gui_copyright=(c) 2018 AT&T Intellectual Property. All rights reserved. +aaf_gui_theme=theme/onap +cadi_loginpage_url=https://AAF_LOCATE_URL/com.att.aaf.gui:2.0/login + +# GUI URLS and Help URLS +cm_url=https://{{.Values.config.cmServiceName}}:8150 +gw_url=https://{{.Values.config.locateServiceName}}:8095 +fs_url=http://{{.Values.config.fsServiceName}}:8096 + +aaf_url.gui_onboard=https://wiki.web.att.com/display/aaf/OnBoarding +aaf_url.cuigui=https://wiki.web.att.com/display/aaf/Using+the+Command+Prompt + +aaf_url.aaf_help=https://wiki.onap.org/display/DW/Application+Authorization+Framework+Documentation +aaf_url.aaf_help.sub=Bootstrapping+AAF,Installation+Guide +aaf_url.aaf_help.sub.Bootstrapping+AAF=https://wiki.onap.org/display/DW/Bootstrapping+AAF +aaf_url.aaf_help.sub.Installation+Guide=https://wiki.onap.org/display/DW/AAF+Installation+Guide +#aaf_url.cadi_help= +aaf_url.tools=AAF+Projects,AAF+Jira,AAF+Calendar +aaf_url.tool=AAF+Jira=https://jira.onap.org/secure/RapidBoard.jspa?rapidView=69&projectKey=AAF&view=detail&selectedIssue=AAF-134 +aaf_url.tool.AAF+Projects=https://gerrit.onap.org/r/#/admin/projects/?filter=aaf%2F +aaf_url.tool.AAF+Calendar=https://wiki.onap.org/pages/viewpage.action?pageId=6587439 diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.hello.props b/kubernetes/aaf/resources/config/etc/org.osaaf.hello.props new file mode 100644 index 0000000000..d832aaf7e0 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.hello.props @@ -0,0 +1,8 @@ +## +## org.osaaf.locator +## AAF Locator Properties +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props +aaf_component=AAF_NS.hello:2.1.0.0 +port=8130 +cadi_registration_hostname={{.Values.config.helloServiceName}} diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.locate.props b/kubernetes/aaf/resources/config/etc/org.osaaf.locate.props new file mode 100644 index 0000000000..47a174ed44 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.locate.props @@ -0,0 +1,8 @@ +## +## org.osaaf.locator +## AAF Locator Properties +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props:/opt/app/osaaf/local/org.osaaf.cassandra.props +aaf_component=AAF_NS.locator:2.1.0.0 +port=8095 +cadi_registration_hostname={{.Values.config.locateServiceName}} diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.log4j.props b/kubernetes/aaf/resources/config/etc/org.osaaf.log4j.props new file mode 100644 index 0000000000..9f10802821 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.log4j.props @@ -0,0 +1,51 @@ +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. +# +log4j.appender.INIT=org.apache.log4j.DailyRollingFileAppender +log4j.appender.INIT.File=${LOG4J_FILENAME_init} +log4j.appender.INIT.DatePattern='.'yyyy-MM-dd +log4j.appender.INIT.layout=org.apache.log4j.PatternLayout +log4j.appender.INIT.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss,SSSZ} %m %n + +log4j.appender.SRVR=org.apache.log4j.DailyRollingFileAppender +log4j.appender.SRVR.File=${LOG4J_FILENAME_service} +log4j.appender.SRVR.DatePattern='.'yyyy-MM-dd +log4j.appender.SRVR.layout=org.apache.log4j.PatternLayout +log4j.appender.SRVR.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss,SSSZ} %p [%c] %m %n + +log4j.appender.AUDIT=org.apache.log4j.DailyRollingFileAppender +log4j.appender.AUDIT.File=${LOG4J_FILENAME_audit} +log4j.appender.AUDIT.DatePattern='.'yyyy-MM-dd +log4j.appender.AUDIT.layout=org.apache.log4j.PatternLayout +log4j.appender.AUDIT.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss,SSSZ} %m %n + +log4j.appender.stdout=org.apache.log4j.ConsoleAppender +log4j.appender.stdout.layout=org.apache.log4j.PatternLayout +log4j.appender.stdout.layout.ConversionPattern=%d %p [%c] %m %n + +# General Apache libraries +log4j.rootLogger=WARN.SRVR +log4j.logger.org.apache=WARN,SRVR +log4j.logger.com.datastax=WARN,SRVR +log4j.logger.init=INFO,INIT +log4j.logger.service=${LOGGING_LEVEL},SRVR +log4j.logger.audit=INFO,AUDIT +# Additional configs, not cauth with Root Logger +log4j.logger.io.netty=INFO,SRVR +log4j.logger.org.eclipse=INFO,SRVR + + diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.oauth.props b/kubernetes/aaf/resources/config/etc/org.osaaf.oauth.props new file mode 100644 index 0000000000..82e80c716a --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.oauth.props @@ -0,0 +1,8 @@ +## +## org.osaaf.locator +## AAF Locator Properties +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props:/opt/app/osaaf/local/org.osaaf.cassandra.props +aaf_component=AAF_NS.oauth:2.1.0.0 +port=8140 +cadi_registration_hostname={{.Values.config.oauthServiceName}} diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.orgs.props b/kubernetes/aaf/resources/config/etc/org.osaaf.orgs.props new file mode 100644 index 0000000000..66bfd2fad3 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.orgs.props @@ -0,0 +1,11 @@ +# +# Define Organizations for use in some of the components. Not all use them +# +Organization.org.osaaf=org.onap.aaf.org.DefaultOrg +org.osaaf.mailHost=smtp.mail.att.com +org.osaaf.mailFrom=DL-aaf-support@aaf.att.com +org.osaaf.default=true +org.osaaf.also_supports=org.osaaf.people + + + diff --git a/kubernetes/aaf/resources/config/etc/org.osaaf.service.props b/kubernetes/aaf/resources/config/etc/org.osaaf.service.props new file mode 100644 index 0000000000..ff3e0b5c33 --- /dev/null +++ b/kubernetes/aaf/resources/config/etc/org.osaaf.service.props @@ -0,0 +1,8 @@ +## +## org.osaaf.service +## AAF Service Properties +## +cadi_prop_files=/opt/app/osaaf/etc/org.osaaf.common.props:/opt/app/osaaf/local/org.osaaf.cassandra.props:/opt/app/osaaf/etc/org.osaaf.orgs.props +aaf_component=AAF_NS.service:2.1.0.0 +port=8100 +cadi_registration_hostname={{.Values.config.serviceServiceName}} diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.aaf.cm.p12 b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.cm.p12 Binary files differnew file mode 100644 index 0000000000..63aedd2560 --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.cm.p12 diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.aaf.keyfile b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.keyfile new file mode 100644 index 0000000000..7206ad9325 --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.keyfile @@ -0,0 +1,27 @@ +rmaOaytuFLnhz07oilUO0nO_mZ18XInIi56OoezdUTR5f1GR45lp_nX7marcYv7j2ZS-dpWOSur0 +sK5M-ByrgxfUPyk749Ex4nGSMLnAq-nFMaREpGZPmNP-ul_vCxCmaHUnWKPJB4jx_K_osKPb0-ng +tqX0hnpbmcq4okV94MUdUs084ymM5LU-qVU_oYbLUM4dXatobe1go8eX2umrutZbQTjz75i4UEcF +Dv9nDwVqHRGUFMU0NeJlrSlRSO-eiDgVtoSCBGtIkDdKPBTUT3wachHmUBiSBJ3GF05yQP1CwWzz +AQRSwphP11xKI7tSViT5RoxjxfQZiVEbeyg9g9BROe_pLyIDskoW_ujdnPOWRcSIx6Q4J0eew3kb +yqcWUPf1K2nSyBSshlsQ6A9NSOLz_KhyIvP_1OG82m1gir3I77Usl7QqMF8IBXCjJ-H_qqR1u-By +qm_AFjagYA2TgF2YQN-fcneom_5_cA74_xwJ41juhOP72ZWGkX1bAdbiKf85uYo2H3g5HeNWijQL +y4wJ4qFrSptQRyV2Ntf9OLgpOsKsPPiLlNBugmCjHBMaPMbQAYRbsyCH2nKdjjTG3c6iF5Cj9Jco +6McvcrYYuq3ynH-2HoL-T-Zgl2AXLxqK4_dl_H243H-GutoJsmIkELLGS_pCpSt4t7xaDvzqxrTj +4qZ1OjozcpnsqM8HebS28IgoqFaOmrCMqO1MLM_CjAyliTy31P28XEbcYvjEY-FWmnJRSpMLc1Pz +-KOH-2V8uTqn5YlUsFt2TNnc8lEwMH6GSV1vkgxwPQaMUgWV2svc0FfBmTLZI4zNmpMu4cGjaG-f +Z8r_hX7pDPANBTaqFxTp999dnaS3lLdZMNbJNEKFF0xxdRuBzsPKDiLa7ItixInZlUcEnwJVWOhC +kcI2J0cEFGxHxWYmYdqyJIvQzjebk6iDqB-mLi0ai-_XYm1niCxZizT_XJADo9LQtTzq1V6pMgYR +PPfbDKoiYRK6D8nbWsGNOh6xOS7zs8qrnTPxwu5CuZX_EFoejmooHTrXEqw2RzRFw9XqXM8p50C3 +YrwI2lA6kTQItGm0yftAxqfbhbjJp_K1P91ckOYL3ZSYze_hXRmguwYuT5NWlKhBtm5aawuDjXEg +yn7PnRTT0smW40hbYbks5L-2VVxTd3tith6Ltqh95miL6vpG5ByDDQlZCWwkq7XH7iScejDvT6UN +jF1K86mNa8CLXuuSzGl1li1CMxoVzW55G3s0-ICDHqjytiUkiUen2V9VzGT9h4BgDfzbShf31M4_ +biO4NL-mkqlDBbh-KcrYjvNj5qQwHSiLSLuQQBoBtJ3hG9jCu4YBYVWJYctV8r3Js_sGDH4rl5w1 +ujEF6QHWZIF73-u53G_LtvoXBnQcrBW8oLpqP-1Pz5d1bio--bRsNa5qAAilNbYmttiKYOYJn4My +c6QvzF81SqTRZy0Fd0NK_hMCglPkH7sd32UX-LBquvQ_yDqB_ml_pADJhWcfuD4iPAQjR2Vgclxf +GPCDva6YpJDzjjnaExDYmGFVFpbIPLfvGUCit_9zAycx0nW1J_cVT1BWFHijjAh_gnIpa6MtY3BE +G3d8ee6_LAQvvVdBwZ955UwyRd-C7Buc7Xcccw-8hcNBKqOCDlE9j4tie2SdO9m53vZRzcLY6Aiw +BiulIAllqHZQYs0OBcaYgbNgJU-gn9ZMWgS9i3ijPvTTBSNX7y7k4L1a4QOceyuOtt7nkv024YUS +acTRmaGotRBuVfI-C0L4Q9NL56_nUATB5ca2GqgLEKnWKsiN3T9cBg4Ji88E8OdiVcoO8segB-0d +QwWCqCZ8_z_R7zBMlDqpfu5wbvoVx0w9JhLgO9f7eoRozqA3qGLv94i1pN6LuU-Q7YPz4jVxmbb_ +2CHyP1n-o1ZWHfWdz6aByXEzrAZdvjfEWwwMYV5l5jFilTXaCNOCjr9S4YjNn0HITdl7E64C06Im +3QWOsnDv9z1APjnFo12KH_1yWscU0t9gx7FG210Ug6C-G3Bko_tm_YOp0Lkum4qrnxgHMf_a
\ No newline at end of file diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.aaf.p12 b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.p12 Binary files differnew file mode 100644 index 0000000000..f40a7556da --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.p12 diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.aaf.props b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.props new file mode 100644 index 0000000000..37a9d62711 --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.props @@ -0,0 +1,17 @@ +############################################################ +# Properties Generated by AT&T Certificate Manager +# by jg1555 +# on 2018-02-21T10:28:08.909-0600 +# @copyright 2016, AT&T +############################################################ +cm_url=https://{{.Values.config.cmServiceName}}:8150 +#hostname=aaf.osaaf.org +aaf_env=DEV +cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US +cadi_keyfile=/opt/app/osaaf/local/org.osaaf.aaf.keyfile +cadi_keystore=/opt/app/osaaf/local/org.osaaf.aaf.p12 +cadi_keystore_password=enc:fDY3WPPqHCMQaZdox2UfpRoEq6b9wUqS-aepo0NiqEFa2t7uYHBdxfQAuEwj9Lwb +#cadi_key_password=enc:<KEY PASSWORD (optional if the same as KEYSTORE PASSWORD)> +cadi_alias=aaf-authz@aaf.osaaf.org +cadi_truststore=/opt/app/osaaf/local/org.osaaf.aaf.trust.p12 +cadi_truststore_password=enc:5nzj6v3Rb0oZPV1zCxg8EJFfkFvWFGJflLB0i_FN0Np diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.aaf.trust.p12 b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.trust.p12 Binary files differnew file mode 100644 index 0000000000..d01e8569ab --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.aaf.trust.p12 diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.aaf_new-24e41f2f436018568cbdecdc1edbd605.p12 b/kubernetes/aaf/resources/config/local/org.osaaf.aaf_new-24e41f2f436018568cbdecdc1edbd605.p12 Binary files differnew file mode 100644 index 0000000000..f40a7556da --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.aaf_new-24e41f2f436018568cbdecdc1edbd605.p12 diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.cassandra.props b/kubernetes/aaf/resources/config/local/org.osaaf.cassandra.props new file mode 100644 index 0000000000..17f238b851 --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.cassandra.props @@ -0,0 +1,29 @@ +############################################################ +# Cassandra properties for AAF Components needing +# on 2018-03-02 06:59.628-0500 +############################################################ +# LOCAL Cassandra +cassandra.clusters={{.Values.config.csServiceName}} +cassandra.clusters.port=9042 +#need this to be fully qualified name when REAL AAF integration +cassandra.clusters.user=cassandra +cassandra.clusters.password=enc:gF_I93pTRMIvj3rof-dx-yK84XYT1UKGf98s1LAJyWV + +# Name for exception that has happened in the past +cassandra.reset.exceptions=com.datastax.driver.core.exceptions.NoHostAvailableException:"no host was tried":"Connection has been closed" + +# Example Consistency Settings for Clusters with at least instances +#cassandra.writeConsistency.ns=LOCAL_QUORUM +#cassandra.writeConsistency.perm=LOCAL_QUORUM +#cassandra.writeConsistency.role=LOCAL_QUORUM +#cassandra.writeConsistency.user_role=LOCAL_QUORUM +#cassandra.writeConsistency.cred=LOCAL_QUORUM +#cassandra.writeConsistency.ns_attrib=LOCAL_QUORUM + +# Consistency Settings when Single Instance +cassandra.writeConsistency.ns=ONE +cassandra.writeConsistency.perm=ONE +cassandra.writeConsistency.role=ONE +cassandra.writeConsistency.user_role=ONE +cassandra.writeConsistency.cred=ONE +cassandra.writeConsistency.ns_attrib=ONE diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.cm.ca.props b/kubernetes/aaf/resources/config/local/org.osaaf.cm.ca.props new file mode 100644 index 0000000000..8843705cbb --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.cm.ca.props @@ -0,0 +1,11 @@ +## +## org.osaaf.cm.ca.props +## Properties to access Certifiate Authority +## + +#Certman +cm_ca.local=org.onap.aaf.auth.cm.ca.LocalCA,/opt/app/osaaf/local/org.osaaf.aaf.cm.p12;aaf_cm_ca;enc:asFEWMNqjH7GktBLb9EGl6L1zfS2qMH5ZS5Zd90KVT5B9ZyRsqx7Gb73YllO8Hyw +cm_ca.local.idDomains=org.osaaf +cm_ca.local.baseSubject=/OU=OSAAF/O=ONAP/C=US +cm_ca.local.perm_type=org.osaaf.aaf.ca + diff --git a/kubernetes/aaf/resources/config/local/org.osaaf.location.props b/kubernetes/aaf/resources/config/local/org.osaaf.location.props new file mode 100644 index 0000000000..fd52d6db11 --- /dev/null +++ b/kubernetes/aaf/resources/config/local/org.osaaf.location.props @@ -0,0 +1,12 @@ +## +## org.osaaf.location.props +## +## Localized Machine Information +## +# Almeda California +cadi_latitude=37.78187 +cadi_longitude=-122.26147 + +#cadi_registration_hostname=aaf-onap-beijing-test.osaaf.org +cadi_trust_masks=10.12.6/24 +aaf_locate_url=https://{{.Values.config.locateServiceName}}:8095 diff --git a/kubernetes/aaf/resources/config/public/AAF_RootCA.cer b/kubernetes/aaf/resources/config/public/AAF_RootCA.cer new file mode 100644 index 0000000000..e9a50d7ea0 --- /dev/null +++ b/kubernetes/aaf/resources/config/public/AAF_RootCA.cer @@ -0,0 +1,31 @@ +-----BEGIN CERTIFICATE----- +MIIFPjCCAyagAwIBAgIJAJ6u7cCnzrWdMA0GCSqGSIb3DQEBCwUAMCwxDjAMBgNV +BAsMBU9TQUFGMQ0wCwYDVQQKDARPTkFQMQswCQYDVQQGEwJVUzAeFw0xODA0MDUx +NDE1MjhaFw0zODAzMzExNDE1MjhaMCwxDjAMBgNVBAsMBU9TQUFGMQ0wCwYDVQQK +DARPTkFQMQswCQYDVQQGEwJVUzCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoC +ggIBAMA5pkgRs7NhGG4ew5JouhyYakgYUyFaG121+/h8qbSdt0hVQv56+EA41Yq7 +XGie7RYDQK9NmAFF3gruE+6X7wvJiChp+Cyd7sFMnb65uWhxEdxWTM2BJFrgfzUn +H8ZCxgaCo3XH4PzlKRy2LQQJEJECwl/RZmRCXijMt5e9h8XoZY/fKkKcZZUsWNCM +pTo266wjvA9MXLmdgReRj0+vrCjrNqy+htwJDztoiHWiYPqT6o8EvGcgjNqjlZx7 +NUNf8MfLDByqKF6+wRbHv1GKjn3/Vijd45Fv8riyRYROiFanvbV6jIfBkv8PZbXg +2VDWsYsgp8NAvMxK+iV8cO+Ck3lBI2GOPZbCEqpPVTYbLUz6sczAlCXwQoPzDIZY +wYa3eR/gYLY1gP2iEVHORag3bLPap9ZX5E8DZkzTNTjovvLk8KaCmfcaUMJsBtDd +ApcUitz10cnRyZc1sX3gE1f3DpzQM6t9C5sOVyRhDcSrKqqwb9m0Ss04XAS9FsqM +P3UWYQyqDXSxlUAYaX892u8mV1hxnt2gjb22RloXMM6TovM3sSrJS0wH+l1nznd6 +aFXftS/G4ZVIVZ/LfT1is4StoyPWZCwwwly1z8qJQ/zhip5NgZTxQw4mi7ww35DY +PdAQOCoajfSvFjqslQ/cPRi/MRCu079heVb5fQnnzVtnpFQRAgMBAAGjYzBhMB0G +A1UdDgQWBBRTVTPyS+vQUbHBeJrBKDF77+rtSTAfBgNVHSMEGDAWgBRTVTPyS+vQ +UbHBeJrBKDF77+rtSTAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB/wQEAwIBhjAN +BgkqhkiG9w0BAQsFAAOCAgEAPx/IaK94n02wPxpnYTy+LVLIxwdq/kawNd6IbiMz +L87zmNMDmHcGbfoRCj8OkhuggX9Lx1/CkhpXimuYsZOFQi5blr/u+v4mIbsgbmi9 +7j+cUHDP0zLycvSvxKHty51LwmaX9a4wkJl5zBU4O1sd/H9tWcEmwJ39ltKoBKBx +c94Zc3iMm5ytRWGj+0rKzLDAXEWpoZ5bE5PLJauA6UDCxDLfs3FwhbS7uDggxYvf +jySF5FCNET94oJ+m8s7VeHvoa8iPGKvXrIqdd7XDHnqJJlVKr7m9S0fMbyEB8ci2 +RtOXDt93ifY1uhoEtEykn4dqBSp8ezvNMnwoXdYPDvTd9uCAFeWFLVreBAWxd25h +PsBTkZA5hpa/rA+mKv6Af4VBViYr8cz4dZCsFChuioVebe9ighrfjB//qKepFjPF +CyjzKN1u0JKm/2x/ORqxkTONG8p3uDwoIOyimUcTtTMv42bfYD88RKakqSFXE9G+ +Z0LlaKABqfjK49o/tsAp+c5LoNlYllKhnetO3QAdraHwdmC36BhoghzR1jpX751A +cZn2VH3Q4XKyp01cJNCJIrua+A+bx6zh3RyW6zIIkbRCbET+UD+4mr8WIcSE3mtR +ZVlnhUDO4z9//WKMVzwS9Rh8/kuszrGFI1KQozXCHLrce3YP6RYZfOed79LXaRwX +dYY= +-----END CERTIFICATE----- diff --git a/kubernetes/aaf/resources/config/public/aaf_2_0.xsd b/kubernetes/aaf/resources/config/public/aaf_2_0.xsd new file mode 100644 index 0000000000..59d4331b22 --- /dev/null +++ b/kubernetes/aaf/resources/config/public/aaf_2_0.xsd @@ -0,0 +1,527 @@ +<!-- Used by AAF (ATT inc 2013) --> +<xs:schema + xmlns:xs="http://www.w3.org/2001/XMLSchema" + xmlns:aaf="urn:aaf:v2_0" + targetNamespace="urn:aaf:v2_0" + elementFormDefault="qualified"> + +<!-- + June 2, 2017, adding Roles, Perms, etc to NSRequest for Onboarding purposes. + + Note: jan 22, 2015. Deprecating the "force" element in the "Request" Structure. Do that + with Query Params. + + Eliminate in 3.0 + --> +<!-- + Errors + Note: This Error Structure has been made to conform to the AT&T TSS Policies + --> + <xs:element name="error"> + <xs:complexType> + <xs:sequence> + <!-- + Unique message identifier of the format ‘ABCnnnn’ where ‘ABC’ is + either ‘SVC’ for Service Exceptions or ‘POL’ for Policy Exception. + Exception numbers may be in the range of 0001 to 9999 where : + * 0001 to 0199 are reserved for common exception messages + * 0200 to 0999 are reserved for Parlay Web Services specification use + * 1000-9999 are available for exceptions + --> + <xs:element name="messageId" type="xs:string" minOccurs="1" maxOccurs="1"/> + + <!-- + Message text, with replacement + variables marked with %n, where n is + an index into the list of <variables> + elements, starting at 1 + --> + <xs:element name="text" type="xs:string" minOccurs="1" maxOccurs="1"/> + + <!-- + List of zero or more strings that + represent the contents of the variables + used by the message text. --> + <xs:element name="variables" type="xs:string" minOccurs="0" maxOccurs="unbounded" /> + </xs:sequence> + </xs:complexType> + </xs:element> + +<!-- + Requests + --> + <xs:complexType name="Request"> + <xs:sequence> + <xs:element name="start" type="xs:dateTime" minOccurs="1" maxOccurs="1" /> + <xs:element name="end" type="xs:dateTime" minOccurs="1" maxOccurs="1"/> + <!-- Deprecated. Use Query Command + <xs:element name="force" type="xs:string" minOccurs="1" maxOccurs="1" default="false"/> + --> + </xs:sequence> + </xs:complexType> + +<!-- + Keys + --> + <xs:element name="keys"> + <xs:complexType> + <xs:sequence> + <xs:element name="key" type="xs:string" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + + +<!-- + Permissions +--> + <xs:complexType name = "pkey"> + <xs:sequence> + <xs:element name="type" type="xs:string"/> + <xs:element name="instance" type="xs:string"/> + <xs:element name="action" type="xs:string"/> + </xs:sequence> + </xs:complexType> + + <xs:element name="permKey"> + <xs:complexType > + <xs:complexContent> + <xs:extension base="aaf:pkey" /> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="perm"> + <xs:complexType > + <xs:complexContent> + <xs:extension base="aaf:pkey"> + <xs:sequence> + <xs:element name="roles" type="xs:string" minOccurs="0" maxOccurs="unbounded"/> + <!-- Note: feb 23, 2015. Added description field. Verify backward compatibility. JR --> + <xs:element name="description" type="xs:string" minOccurs="0" maxOccurs="1"/> + <!-- This data not filled in unless Requested --> + <xs:element name="ns" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="perms"> + <xs:complexType> + <xs:sequence> + <xs:element ref="aaf:perm" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + + <xs:element name="permRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="type" type="xs:string"/> + <xs:element name="instance" type="xs:string"/> + <xs:element name="action" type="xs:string"/> + <!-- Note: feb 23, 2015. Added description field. Verify backward compatibility. JR --> + <xs:element name="description" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + +<!-- + Roles +--> + <xs:complexType name="rkey"> + <xs:sequence> + <xs:element name="name" type="xs:string"/> + </xs:sequence> + </xs:complexType> + + <xs:element name="roleKey"> + <xs:complexType > + <xs:complexContent> + <xs:extension base="aaf:rkey" /> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="role"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:rkey"> + <xs:sequence> + <xs:element name="perms" type="aaf:pkey" minOccurs="0" maxOccurs="unbounded"/> + <!-- Note: feb 23, 2015. Added description field. Verify backward compatibility. JR --> + <xs:element name="description" type="xs:string" minOccurs="0" maxOccurs="1"/> + <!-- This data not filled in unless Requested --> + <xs:element name="ns" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="roles"> + <xs:complexType> + <xs:sequence> + <xs:element ref="aaf:role" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + + <xs:element name="roleRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="name" type="xs:string" minOccurs="1" maxOccurs="1"/> + <!-- Note: feb 23, 2015. Added description field. Verify backward compatibility. JR --> + <xs:element name="description" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <!-- Added userRole return types jg1555 9/16/2015 --> + <xs:element name="userRole"> + <xs:complexType> + <xs:sequence> + <xs:element name="user" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="role" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="expires" type="xs:date" minOccurs="1" maxOccurs="1" /> + </xs:sequence> + </xs:complexType> + </xs:element> + + <!-- Added userRoles return types jg1555 9/16/2015 --> + <xs:element name="userRoles"> + <xs:complexType> + <xs:sequence> + <xs:element ref="aaf:userRole" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + + <xs:element name="userRoleRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="user" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="role" type="xs:string" minOccurs="1" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="rolePermRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="perm" type="aaf:pkey" minOccurs="1" maxOccurs="1"/> + <xs:element name="role" type="xs:string" minOccurs="1" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="nsRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="name" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="admin" type="xs:string" minOccurs="1" maxOccurs="unbounded"/> + <xs:element name="responsible" type="xs:string" minOccurs="1" maxOccurs="unbounded"/> + <!-- Note: feb 23, 2015. Added description field. Verify backward compatibility. JR --> + <xs:element name="description" type="xs:string" minOccurs="0" maxOccurs="1"/> + <!-- Note: dec 11, 2015. Request-able NS Type JG --> + <xs:element name="type" type="xs:string" minOccurs="0" maxOccurs="1"/> + + <!-- "scope" is deprecated and unused as of AAF 2.0.11. It will be removed in future versions + <xs:element name="scope" type="xs:int" minOccurs="0" maxOccurs="1"/> + + + <xs:element ref="aaf:roleRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element ref="aaf:permRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element name="aaf_id" type="xs:string" minOccurs="0" maxOccurs="1"/> + <xs:element ref="aaf:userRoleRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element name = "attrib" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name = "key" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name = "value" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:complexType> + </xs:element> + + + --> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="nsAttribRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="ns" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name = "attrib" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name = "key" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name = "value" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name = "nss"> + <xs:complexType> + <xs:sequence> + <xs:element name = "ns" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name = "name" type = "xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name = "responsible" type = "xs:string" minOccurs="0" maxOccurs="unbounded"/> + <xs:element name = "admin" type = "xs:string" minOccurs="0" maxOccurs="unbounded"/> + <!-- Note: feb 23, 2015. Added description field. Verify backward compatibility. JR --> + <xs:element name = "description" type = "xs:string" minOccurs="0" maxOccurs="1"/> + <!-- Note: Dec 16, 2015. Added description field. Verify backward compatibility. JG --> + <xs:element name = "attrib" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name = "key" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name = "value" type="xs:string" minOccurs="0" maxOccurs="1"/> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:complexType> + </xs:element> + +<!-- + Users +--> + <xs:element name="users"> + <xs:complexType> + <xs:sequence> + <xs:element name="user" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name="id" type="xs:string" minOccurs="1" maxOccurs="1" /> + <!-- Changed type to dateTime, because of importance of Certs --> + <xs:element name="expires" type="xs:dateTime" minOccurs="1" maxOccurs="1" /> + <!-- need to differentiate User Cred Types, jg1555 5/20/2015 + This Return Object is shared by multiple functions: + Type is not returned for "UserRole", but only "Cred" + --> + <xs:element name="type" type="xs:int" minOccurs="0" maxOccurs="1" /> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:complexType> + </xs:element> + +<!-- + Certs + Added jg1555 5/20/2015 to support identifying Certificate based Services + --> + <xs:element name="certs"> + <xs:complexType> + <xs:sequence> + <xs:element name="cert" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name="id" type="xs:string" minOccurs="1" maxOccurs="1" /> + <xs:element name="x500" type="xs:string" minOccurs="1" maxOccurs="1" /> + <xs:element name="expires" type="xs:dateTime" minOccurs="1" maxOccurs="1" /> + <xs:element name="fingerprint" type="xs:hexBinary" minOccurs="1" maxOccurs="1" /> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:complexType> + </xs:element> + +<!-- + Credentials +--> + <xs:element name="credRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="id" type="xs:string"/> + <xs:element name="type" type="xs:int" minOccurs="0" maxOccurs="1"/> + <xs:choice > + <xs:element name="password" type="xs:string" /> + <xs:element name="entry" type="xs:string" /> + </xs:choice> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + +<!-- + Multi Request + --> + + <xs:element name="multiRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element ref="aaf:nsRequest" minOccurs="0" maxOccurs="1"/> + <xs:element ref="aaf:nsAttribRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element ref="aaf:roleRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element ref="aaf:permRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element ref="aaf:credRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element ref="aaf:userRoleRequest" minOccurs="0" maxOccurs="unbounded"/> + <xs:element ref="aaf:rolePermRequest" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + +<!-- + History + --> + <xs:element name="history"> + <xs:complexType> + <xs:sequence> + <xs:element name="item" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name="YYYYMM" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="timestamp" type="xs:dateTime" minOccurs="1" maxOccurs="1"/> + <xs:element name="subject" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="target" type = "xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="action" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="memo" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="user" type="xs:string" minOccurs="1" maxOccurs="1"/> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:complexType> + </xs:element> + +<!-- + Approvals + --> + <xs:complexType name="approval"> + <xs:sequence> + <!-- Note, id is set by system --> + <xs:element name="id" type="xs:string" minOccurs="0" maxOccurs="1"/> + <xs:element name="ticket" type="xs:string"/> + <xs:element name="user" type="xs:string"/> + <xs:element name="approver" type="xs:string"/> + <xs:element name="type" type="xs:string"/> + <xs:element name="memo" type="xs:string"/> + <xs:element name="updated" type="xs:dateTime"/> + <xs:element name="status"> + <xs:simpleType> + <xs:restriction base="xs:string"> + <xs:enumeration value="approve"/> + <xs:enumeration value="reject"/> + <xs:enumeration value="pending"/> + </xs:restriction> + </xs:simpleType> + </xs:element> + <xs:element name="operation"> + <xs:simpleType> + <xs:restriction base="xs:string"> + <xs:enumeration value="C"/> + <xs:enumeration value="U"/> + <xs:enumeration value="D"/> + <xs:enumeration value="G"/> + <xs:enumeration value="UG"/> + </xs:restriction> + </xs:simpleType> + </xs:element> + </xs:sequence> + </xs:complexType> + <xs:element name="approvals"> + <xs:complexType> + <xs:sequence> + <xs:element name="approvals" type="aaf:approval" minOccurs="1" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + +<!-- + Delegates +--> + <xs:complexType name="delg"> + <xs:sequence> + <xs:element name="user" type="xs:string"/> + <xs:element name="delegate" type="xs:string"/> + <xs:element name="expires" type="xs:date"/> + </xs:sequence> + </xs:complexType> + + <xs:element name="delgRequest"> + <xs:complexType> + <xs:complexContent> + <xs:extension base="aaf:Request"> + <xs:sequence> + <xs:element name="user" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="delegate" type="xs:string" minOccurs="1" maxOccurs="1"/> + </xs:sequence> + </xs:extension> + </xs:complexContent> + </xs:complexType> + </xs:element> + + <xs:element name="delgs"> + <xs:complexType> + <xs:sequence> + <xs:element name="delgs" type="aaf:delg" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + + <!-- jg 3/11/2015 New for 2.0.8 --> + <xs:element name="api"> + <xs:complexType> + <xs:sequence> + <xs:element name="route" minOccurs="0" maxOccurs="unbounded"> + <xs:complexType> + <xs:sequence> + <xs:element name="meth" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="path" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="param" type="xs:string" minOccurs="0" maxOccurs="unbounded"/> + <xs:element name="desc" type="xs:string" minOccurs="1" maxOccurs="1"/> + <xs:element name="comments" type="xs:string" minOccurs="0" maxOccurs="unbounded"/> + <xs:element name="contentType" type="xs:string" minOccurs="0" maxOccurs="unbounded"/> + <xs:element name="expected" type="xs:int" minOccurs="1" maxOccurs="1"/> + <xs:element name="explicitErr" type="xs:int" minOccurs="0" maxOccurs="unbounded"/> + </xs:sequence> + </xs:complexType> + </xs:element> + </xs:sequence> + </xs:complexType> + </xs:element> +</xs:schema>
\ No newline at end of file diff --git a/kubernetes/aaf/resources/config/public/iframe_denied_test.html b/kubernetes/aaf/resources/config/public/iframe_denied_test.html new file mode 100644 index 0000000000..613e9c70c1 --- /dev/null +++ b/kubernetes/aaf/resources/config/public/iframe_denied_test.html @@ -0,0 +1,10 @@ +<!DOCTYPE html> +<html> +<body> + +<iframe src="https://mithrilcsp.sbc.com:8095/gui/home"> + <p>Your browser does not support iframes.</p> +</iframe> + +</body> +</html> diff --git a/kubernetes/aaf/resources/config/public/truststoreONAP.p12 b/kubernetes/aaf/resources/config/public/truststoreONAP.p12 Binary files differnew file mode 100644 index 0000000000..d01e8569ab --- /dev/null +++ b/kubernetes/aaf/resources/config/public/truststoreONAP.p12 diff --git a/kubernetes/aaf/resources/config/public/truststoreONAPall.jks b/kubernetes/aaf/resources/config/public/truststoreONAPall.jks Binary files differnew file mode 100644 index 0000000000..ff844b109d --- /dev/null +++ b/kubernetes/aaf/resources/config/public/truststoreONAPall.jks diff --git a/kubernetes/aaf/templates/configmap.yaml b/kubernetes/aaf/templates/configmap.yaml index c7cf9ae6c4..cfa57f7d99 100644 --- a/kubernetes/aaf/templates/configmap.yaml +++ b/kubernetes/aaf/templates/configmap.yaml @@ -15,7 +15,42 @@ apiVersion: v1 kind: ConfigMap metadata: - name: {{ include "common.fullname" . }} + name: {{ .Release.Name }}-aaf-backup namespace: {{ include "common.namespace" . }} data: -{{ (.Files.Glob "resources/config/aaf-data/*").AsConfig | indent 2 }} +{{ tpl (.Files.Glob "resources/config/backup/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-aaf-public + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/public/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-aaf-local + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/local/org.osaaf.location.props").AsConfig . | indent 2 }} +{{ tpl (.Files.Glob "resources/config/local/org.osaaf.cm.ca.props").AsConfig . | indent 2 }} +{{ tpl (.Files.Glob "resources/config/local/org.osaaf.cassandra.props").AsConfig . | indent 2 }} +{{ tpl (.Files.Glob "resources/config/local/org.osaaf.aaf.props").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-aaf-etc + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/etc/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ .Release.Name }}-aaf-data + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/data/*").AsConfig . | indent 2 }} diff --git a/kubernetes/aaf/templates/job.yaml b/kubernetes/aaf/templates/job.yaml new file mode 100644 index 0000000000..7ce871e54a --- /dev/null +++ b/kubernetes/aaf/templates/job.yaml @@ -0,0 +1,132 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: batch/v1 +kind: Job +metadata: + name: {{ include "common.fullname" . }}-create-config + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + template: + metadata: + labels: + app: aaf-init-job + release: {{ .Release.Name }} + spec: + containers: + - command: ["/bin/bash","-c","if [ ! -d /data/backup ]; then mkdir /data/data && cp -Ra /data1/data/..data/* /data/data/ && mkdir /data/etc && cp -Ra /data1/etc/..data/* data/etc/ && mkdir /data/backup && cp -Ra /data1/backup/..data/* /data/backup/ && cp -Ra /data1/public /data/ && cp -Ra /data1/local /data && mkdir -p /data/logs/oauth && mkdir -p /data/logs/hello && mkdir -p /data/logs/fs && mkdir -p /data/logs/gui && mkdir -p /data/logs/locate && mkdir -p /data/logs/cm && mkdir -p /data/logs/service; fi; exit 0"] + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: aaf-init-job + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - mountPath: /data + name: aaf-persistent-data + - mountPath: /data1/etc + name: aaf-etc + - mountPath: /data1/data + name: aaf-data + - mountPath: /data1/public/iframe_denied_test.html + name: aaf-public + subPath: iframe_denied_test.html + - mountPath: /data1/public/aaf_2_0.xsd + name: aaf-public + subPath: aaf_2_0.xsd + - mountPath: /data1/public/truststoreONAP.p12 + name: aaf-public-secret + subPath: truststoreONAP.p12 + - mountPath: /data1/public/AAF_RootCA.cer + name: aaf-public-secret + subPath: AAF_RootCA.cer + - mountPath: /data1/public/truststoreONAPall.jks + name: aaf-public-secret + subPath: truststoreONAPall.jks + - mountPath: /data1/local/org.osaaf.location.props + name: aaf-local + subPath: org.osaaf.location.props + - mountPath: /data1/local/org.osaaf.cm.ca.props + name: aaf-local + subPath: org.osaaf.cm.ca.props + - mountPath: /data1/local/org.osaaf.cassandra.props + name: aaf-local + subPath: org.osaaf.cassandra.props + - mountPath: /data1/local/org.osaaf.aaf.props + name: aaf-local + subPath: org.osaaf.aaf.props + - mountPath: /data1/local/org.osaaf.aaf.trust.p12 + name: aaf-local-secret + subPath: org.osaaf.aaf.trust.p12 + - mountPath: /data1/local/org.osaaf.aaf.p12 + name: aaf-local-secret + subPath: org.osaaf.aaf.p12 + - mountPath: /data1/local/org.osaaf.aaf.keyfile + name: aaf-local-secret + subPath: org.osaaf.aaf.keyfile + - mountPath: /data1/local/org.osaaf.aaf.cm.p12 + name: aaf-local-secret + subPath: org.osaaf.aaf.cm.p12 + - mountPath: /data1/backup + name: aaf-backup + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: aaf-local-secret + secret: + secretName: {{ .Release.Name }}-aaf-local-secret + - name: aaf-public-secret + secret: + secretName: {{ .Release.Name }}-aaf-public-secret + - name: aaf-etc + configMap: + name: {{ .Release.Name }}-aaf-etc + - name: aaf-local + configMap: + name: {{ .Release.Name }}-aaf-local + - name: aaf-backup + configMap: + name: {{ .Release.Name }}-aaf-backup + - name: aaf-public + configMap: + name: {{ .Release.Name }}-aaf-public + - name: aaf-data + configMap: + name: {{ .Release.Name }}-aaf-data + - name: aaf-persistent-data + {{- if .Values.global.persistence.enabled }} + persistentVolumeClaim: + claimName: {{ .Release.Name }}-aaf-pvc + {{- else }} + emptyDir: {} + {{- end }} + restartPolicy: OnFailure + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/aaf/templates/pv.yaml b/kubernetes/aaf/templates/pv.yaml new file mode 100644 index 0000000000..d9b58f62ad --- /dev/null +++ b/kubernetes/aaf/templates/pv.yaml @@ -0,0 +1,37 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.global.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolume +apiVersion: v1 +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" + name: {{ include "common.fullname" . }} +spec: + capacity: + storage: {{ .Values.persistence.size}} + accessModes: + - {{ .Values.persistence.accessMode }} + persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} + hostPath: + path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }} +{{- end -}} diff --git a/kubernetes/aaf/templates/pvc.yaml b/kubernetes/aaf/templates/pvc.yaml new file mode 100644 index 0000000000..255c27751c --- /dev/null +++ b/kubernetes/aaf/templates/pvc.yaml @@ -0,0 +1,48 @@ +{{/* +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +*/}} + +{{- if and .Values.global.persistence.enabled (not .Values.persistence.existingClaim) -}} +kind: PersistentVolumeClaim +apiVersion: v1 +metadata: + name: {{ .Release.Name }}-aaf-pvc + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" + release: "{{ .Release.Name }}" + heritage: "{{ .Release.Service }}" +{{- if .Values.persistence.annotations }} + annotations: +{{ toYaml .Values.persistence.annotations | indent 4 }} +{{- end }} +spec: + selector: + matchLabels: + name: {{ include "common.fullname" . }} + accessModes: + - {{ .Values.persistence.accessMode }} + resources: + requests: + storage: {{ .Values.persistence.size }} +{{- if .Values.persistence.storageClass }} +{{- if (eq "-" .Values.persistence.storageClass) }} + storageClassName: "" +{{- else }} + storageClassName: "{{ .Values.persistence.storageClass }}" +{{- end }} +{{- end }} +{{- end -}} diff --git a/kubernetes/aaf/templates/secrets.yaml b/kubernetes/aaf/templates/secrets.yaml new file mode 100644 index 0000000000..d67601ca65 --- /dev/null +++ b/kubernetes/aaf/templates/secrets.yaml @@ -0,0 +1,47 @@ +# Copyright © 2017 Amdocs, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +apiVersion: v1 +kind: Secret +metadata: + name: {{ .Release.Name}}-aaf-local-secret + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ (.Files.Glob "resources/config/local/org.osaaf.aaf.trust.p12").AsSecrets | indent 2 }} +{{ (.Files.Glob "resources/config/local/org.osaaf.aaf.p12").AsSecrets | indent 2 }} +{{ (.Files.Glob "resources/config/local/org.osaaf.aaf.keyfile").AsSecrets | indent 2 }} +{{ (.Files.Glob "resources/config/local/org.osaaf.aaf.cm.p12").AsSecrets | indent 2 }} +type: Opaque +--- +apiVersion: v1 +kind: Secret +metadata: + name: {{ .Release.Name}}-aaf-public-secret + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +data: +{{ (.Files.Glob "resources/config/public/truststoreONAP.p12").AsSecrets | indent 2 }} +{{ (.Files.Glob "resources/config/public/AAF_RootCA.cer").AsSecrets | indent 2 }} +{{ (.Files.Glob "resources/config/public/truststoreONAPall.jks").AsSecrets | indent 2 }} +type: Opaque + diff --git a/kubernetes/aaf/values.yaml b/kubernetes/aaf/values.yaml index 5f231003b1..805d3d1e6e 100644 --- a/kubernetes/aaf/values.yaml +++ b/kubernetes/aaf/values.yaml @@ -20,24 +20,21 @@ global: repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - -# If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines. -# persistence: -# mountPath: /dockerdata + persistence: + enabled: true ################################################################# # Application configuration defaults. ################################################################# -# application image -repository: nexus3.onap.org:10001 -image: onap/aaf/authz-service:latest -pullPolicy: Always - -# flag to enable debugging - application support required -debugEnabled: false - -# application configuration -config: {} +config: + serviceServiceName: aaf-service + locateServiceName: aaf-locate + cmServiceName: aaf-cm + fsServiceName: aaf-fs + guiServiceName: aaf-gui + helloServiceName: aaf-hello + oauthServiceName: aaf-oauth + csServiceName: aaf-cass # default number of instances replicaCount: 1 @@ -58,18 +55,30 @@ readiness: initialDelaySeconds: 10 periodSeconds: 10 -service: - type: NodePort - name: aaf-authz - #targetPort - internalPort: 8101 - #port - externalPort: 8101 - nodePort: 99 - ingress: enabled: false +## Persist data to a persitent volume +persistence: + ## A manually managed Persistent Volume and Claim + ## Requires persistence.enabled: true + ## If defined, PVC must be created manually before volume will be bound + # existingClaim: + volumeReclaimPolicy: Retain + + ## database data Persistent Volume Storage Class + ## If defined, storageClassName: <storageClass> + ## If set to "-", storageClassName: "", which disables dynamic provisioning + ## If undefined (the default) or set to null, no storageClassName spec is + ## set, choosing the default provisioner. (gp2 on AWS, standard on + ## GKE, AWS & OpenStack) + ## + # storageClass: "-" + accessMode: ReadWriteMany + size: 2Gi + mountPath: /dockerdata-nfs + mountSubPath: aaf/data + resources: {} # We usually recommend not to specify default resources and to leave this as a conscious # choice for the user. This also increases chances charts run on environments with little diff --git a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py index f5df9fc32d..2235a31f71 100755 --- a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py @@ -1,7 +1,8 @@ # aaf info - everything is from the private oam network (also called onap private network) -GLOBAL_AAF_SERVER = "http://aaf.{{include "common.namespace" .}}:8101" -GLOBAL_AAF_USERNAME = "dgl@openecomp.org" -GLOBAL_AAF_PASSWORD = "ecomp_admin" +GLOBAL_AAF_SERVER = "https://aaf-service.{{include "common.namespace" .}}:8100" +GLOBAL_AAF_USERNAME = "demo@people.osaaf.org" +GLOBAL_AAF_PASSWORD = "demo123456!" + # aai info - everything is from the private oam network (also called onap private network) GLOBAL_AAI_SERVER_PROTOCOL = "https" GLOBAL_AAI_SERVER_PORT = "8443" @@ -17,7 +18,6 @@ GLOBAL_APPC_PASSWORD = "admin" GLOBAL_ASDC_SERVER_PROTOCOL = "http" GLOBAL_ASDC_FE_PORT = "8181" GLOBAL_ASDC_BE_PORT = "8080" -GLOBAL_ASDC_BE_ONBOARD_PORT = "8081" GLOBAL_ASDC_BE_USERNAME = "beep" GLOBAL_ASDC_BE_PASSWORD = "boop" # clamp info - everything is from the private oam network (also called onap private network) diff --git a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py index 585555312c..7ce15db7ea 100755 --- a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py +++ b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py @@ -1,6 +1,6 @@ # File generated from /opt/config # -GLOBAL_INJECTED_AAF_IP_ADDR = "aaf.{{include "common.namespace" .}}" +GLOBAL_INJECTED_AAF_IP_ADDR = "aaf-service.{{include "common.namespace" .}}" GLOBAL_INJECTED_AAI1_IP_ADDR = "aai.{{include "common.namespace" .}}" GLOBAL_INJECTED_AAI2_IP_ADDR = "N/A" GLOBAL_INJECTED_APPC_IP_ADDR = "appc.{{include "common.namespace" .}}" @@ -39,7 +39,6 @@ GLOBAL_INJECTED_REGION = "{{ .Values.openStackRegion }}" GLOBAL_INJECTED_REMOTE_REPO = "http://gerrit.onap.org/r/testsuite/properties.git" GLOBAL_INJECTED_SCRIPT_VERSION = "{{ .Values.scriptVersion }}" GLOBAL_INJECTED_SDC_BE_IP_ADDR = "sdc-be.{{include "common.namespace" .}}" -GLOBAL_INJECTED_SDC_BE_ONBOARD_IP_ADDR = "sdc-onboarding-be.{{include "common.namespace" .}}" GLOBAL_INJECTED_SDC_FE_IP_ADDR = "sdc-fe.{{include "common.namespace" .}}" GLOBAL_INJECTED_SDC_IP_ADDR = "N/A" GLOBAL_INJECTED_SDNC_IP_ADDR = "sdnc.{{include "common.namespace" .}}" @@ -52,7 +51,7 @@ GLOBAL_INJECTED_VM_FLAVOR = "{{ .Values.openStackFlavourMedium }}" GLOBAL_INJECTED_VNFSDK_IP_ADDR = "refrepo.{{include "common.namespace" .}}" GLOBAL_INJECTED_PROPERTIES = { - "GLOBAL_INJECTED_AAF_IP_ADDR" : "aaf.{{include "common.namespace" .}}", + "GLOBAL_INJECTED_AAF_IP_ADDR" : "aaf-service.{{include "common.namespace" .}}", "GLOBAL_INJECTED_AAI1_IP_ADDR" : "aai.{{include "common.namespace" .}}", "GLOBAL_INJECTED_AAI2_IP_ADDR" : "N/A", "GLOBAL_INJECTED_APPC_IP_ADDR" : "appc.{{include "common.namespace" .}}", @@ -90,7 +89,6 @@ GLOBAL_INJECTED_PROPERTIES = { "GLOBAL_INJECTED_REGION" : "{{ .Values.openStackRegion }}", "GLOBAL_INJECTED_REMOTE_REPO" : "http://gerrit.onap.org/r/testsuite/properties.git", "GLOBAL_INJECTED_SDC_BE_IP_ADDR" : "sdc-be.{{include "common.namespace" .}}", - "GLOBAL_INJECTED_SDC_BE_ONBOARD_IP_ADDR" : "sdc-onboarding-be.{{include "common.namespace" .}}", "GLOBAL_INJECTED_SDC_FE_IP_ADDR" : "sdc-fe.{{include "common.namespace" .}}", "GLOBAL_INJECTED_SDC_IP_ADDR" : "N/A", "GLOBAL_INJECTED_SCRIPT_VERSION" : "{{ .Values.scriptVersion }}", |