summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--kubernetes/Makefile7
-rw-r--r--kubernetes/README.md133
-rw-r--r--kubernetes/README_HELM20
3 files changed, 78 insertions, 82 deletions
diff --git a/kubernetes/Makefile b/kubernetes/Makefile
index f3e50e4347..7ba5ba934a 100644
--- a/kubernetes/Makefile
+++ b/kubernetes/Makefile
@@ -52,5 +52,12 @@ clean:
@rm -f */requirements.lock
@rm -f *tgz */charts/*tgz
@rm -rf $(PACKAGE_DIR)
+
+# start up a local helm repo to serve up
+repo:
+ @mkdir -p $(PACKAGE_DIR)
+ @helm serve --repo-path $(PACKAGE_DIR) &
+ @helm repo index $(PACKAGE_DIR)
+ @helm repo add local http://127.0.0.1:8879
%:
@:
diff --git a/kubernetes/README.md b/kubernetes/README.md
index dc49e5445b..9c315cbafe 100644
--- a/kubernetes/README.md
+++ b/kubernetes/README.md
@@ -1,78 +1,87 @@
-## **Quick Start Guide - ONAP on Kubernetes**
+## **Quick Start Guide**
-This is a quick start guide to help you get started on ONAP installation. Creating an ONAP deployment instance requires creating base configuration on the host node and then deploying the runtime containers.
+This is a quick start guide describing how to deploy ONAP on Kubernetes using Helm.
Pre-requisites:
- Your Kubernetes environment must be available. For more information see, [ONAP on Kubernetes](https://wiki.onap.org/display/DW/ONAP+on+Kubernetes).
- Deployment artifacts are customized for your location.
-Step 1
-Review and optionally change configuration parameters:
-
-Setup the [/oom/kubernetes/config/onap-parameters.yaml](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters.yaml;h=7ddaf4d4c3dccf2fad515265f0da9c31ec0e64b1;hb=refs/heads/master) file with key-value pairs specific to your OpenStack environment.
-
-OR
-
-There is a [sample](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters-sample.yaml;h=3a74beddbbf7f9f9ec8e5a6abaecb7cb238bd519;hb=refs/heads/master) that may help you out or even be usable directly if you don't intend to actually use OpenStack resources.
-
-
-Step 2
-
-In-order to be able to support multiple ONAP instances within a single kubernetes environment, a configuration set is required. To do this, execute the [createConfig.sh](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/createConfig.sh;h=f226ccae47ca6de15c1da49be4b8b6de974895ed;hb=refs/heads/master) script:
-
-> oom/kubernetes/config/createConfig.sh -n onap
-
-Where:
-'onap' refers to the name of the instance. This serves as the Namespace prefix for each deployed ONAP component (for example, onap-mso).
-
-Step 3
-
-The bash script [createAll.bash](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/oneclick/createAll.bash;h=5e5f2dc76ea7739452e757282e750638b4e3e1de;hb=refs/heads/master) is used to create an ONAP deployment with kubernetes. It has two primary functions:
-
-- Creating the namespaces used to encapsulate the ONAP components, and
-- Creating the services, pods and containers within each of these namespaces that provide the core functionality of ONAP.
-
-Before you execute the createAll.bash. script, pod config-init ([pod-config-init.yaml](https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/pod-config-init.yaml;h=b1285ce21d61815c082f6d6aa3c43d00561811c7;hb=refs/heads/master)) may need editing to match your environment and deployment into the default namespace.
-
-To deploy the containers and create your ONAP system, execute the following command:
-
-> oom/kubernetes/oneclick/createAll.bash -n onap
-
-#### **Additional information on usage of createAll.bash**
-
-Namespaces provide isolation between ONAP components as ONAP release 1.0 contains duplicate application (for example, mariadb) and port usage.
-
-As such createAll.bash requires the user to enter a namespace prefix string that can be used to separate multiple deployments of onap. The result will be set of 10 namespaces (for example, onap-sdc, onap-aai, onap-mso, onap-message-router, onap-robot, onap-vid, onap-sdnc, onap-portal, onap-policy, onap-appc) being created within the kubernetes environment.
-
-
-#### **Deploying multiple ONAP instances within the same Kubernetes cluster**
-
-To deploy multiple ONAP instances, you must specify the number of Instances you would like to create in a Kubernetes cluster using createAllbash.
-
-This is currently required due to the use of NodePort ranges. NodePorts allow external IP:Port access to containers that are running inside a Kubernetes cluster.
-
-To create multiple instances of an ONAP deployment in the cluster, use the following commands:
-
-> oom/kubernetes/config/createConfig.sh -n onap
-
-> oom/kubernetes/oneclick/createAll.bash -n onap -i 2
-
-Where:
-
-- 'onap' refers to the name of the instance.
-
-- ‘i 2’ refers to the number of instances of an ONAP deployment in the cluster.
-
-#### **To delete a deployed instance**
+### **Deploy ONAP Instance**
+
+Step 1. Clone the OOM repository from ONAP gerrit:
+
+```
+> git clone http://gerrit.onap.org/r/oom
+> cd oom/kubernetes
+```
+
+Step 2. Customize the oom/kubernetes/onap parent chart, like the values.yaml file, to suit your deployment. You may want to selectively enable or disable ONAP components by changing the subchart **enabled** flags to *true* or *false*.
+```
+Example:
+...
+robot: # Robot Health Check
+ enabled: true
+sdc:
+ enabled: false
+sdnc:
+ enabled: false
+so: # Service Orchestrator
+ enabled: true
+...
+```
+
+Step 3. To setup a local Helm repository to serve up the local ONAP charts:
+```
+> helm serve &
+```
+Note the port number that is listed and use it in the Helm repo add as follows:
+```
+> helm repo add local http://127.0.0.1:8879
+```
+
+Step 4. Build a local Helm repository (from the kubernetes directory):
+```
+> make all
+```
+
+Step 5. Display the charts that are available to be deployed:
+```
+> helm search -l
+NAME VERSION DESCRIPTION
+local/appc 2.0.0 Application Controller
+local/clamp 2.0.0 ONAP Clamp
+local/onap 2.0.0 Open Network Automation Platform (ONAP)
+local/robot 2.0.0 A helm Chart for kubernetes-ONAP Robot
+local/so 2.0.0 ONAP Service Orchestrator
+...
+```
+
+**Note:**
+Setup of this Helm repository is a one time activity. If you make changes to your deployment charts or values be sure to use **make** to update your local Helm repository.
+
+Step 6. Once the repo is setup, installation of ONAP can be done with a single command:
+```
+> helm install local/onap -name dev --namespace onap
+```
+**Note:** the **--namespace onap** is currently required while all onap helm charts are migrated to version 2.0. After this activity is complete, namespaces will be optional.
+
+Use the following to monitor your deployment and determine when ONAP is ready for use:
+```
+> kubectl get pods --all-namespaces -o=wide
+```
+
+
+#### **Cleanup deployed ONAP instance**
To delete a deployed instance, use the following command:
+```
+> helm del dev --purge
+```
-> oom/kubernetes/oneclick/deleteAll.bash -n onap
-**Note:** Deleting the runtime containers does not remove the configuration created in step 2.
For more information on OOM project documentation, refer to:
diff --git a/kubernetes/README_HELM b/kubernetes/README_HELM
deleted file mode 100644
index 0f65120397..0000000000
--- a/kubernetes/README_HELM
+++ /dev/null
@@ -1,20 +0,0 @@
-Prerequisites:
-- K8s
-- Helm
-
-In order to use Helm with Rancher, check the tiller version installed
-by running "helm version" on the rancher CLI
-and install the appropriate Helm.
-Notice both tiller and helm are installed,
-but you will need to install on your VM.
-
-charts were tested with the following setup:
- Rancher Release v1.6.7
- k8s version 1.7.2
- Helm/Tiller version v2.3.0
-also tested on:
- k8s version v1.5.2
- Helm/Tiller v2.6.0
-
-Download Helm:
-https://github.com/kubernetes/helm