Move dh and ph to Helm deployment

- patchset 2 fixes copyrights
- patchset 2 removes unused config.json files

Issue-ID: DCAEGEN2-1091
Issue-ID: DCAEGEN2-1092
Change-Id: I6e3ecadb3bb18771bc4d0f7deb0c2865c1e1e236
Signed-off-by: Jack Lucas <jflucas@research.att.com>

24 files changed, 956 insertions, 174 deletions

diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-inventory-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-inventory-inputs.yaml
deleted file mode 100644
index 2f897db54e..0000000000
--- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-inventory-inputs.yaml
+++ /dev/null
@@ -1,32 +0,0 @@
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-sdc_address: '{{ .Values.config.address.sdc }}.{{include "common.namespace" . }}:8443'
-sdc_uri: 'https://{{ .Values.config.address.sdc }}.{{include "common.namespace" . }}:8443'
-sdc_user: "dcae"
-sdc_password: !!str Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
-sdc_environment_name: "AUTO"
-sdc_msg_bus_address: '{{ .Values.config.address.message_router }}.{{include "common.namespace" . }}'
-postgres_user_inventory: "postgres"
-postgres_password_inventory: "onap123"
-{{ if .Values.componentImages.service_change_handler }}
-service_change_handler_image: '{{ include "common.repository" . }}/{{ .Values.componentImages.service_change_handler }}'
-{{ end }}
-{{ if .Values.componentImages.inventory }}
-inventory_image: '{{ include "common.repository" . }}/{{ .Values.componentImages.inventory }}'
-{{ end }}
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml
deleted file mode 100644
index 9cd37b5e2a..0000000000
--- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-policy_handler-inputs.yaml
+++ /dev/null
@@ -1,113 +0,0 @@
-#============LICENSE_START========================================================
-#=================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-
-{{ if .Values.componentImages.policy_handler }}
-policy_handler_image: {{ include "common.repository" . }}/{{ .Values.componentImages.policy_handler }}
-{{ end }}
-application_config:
-  policy_handler :
-    # parallelize the getConfig queries to policy-engine on each policy-update notification
-    thread_pool_size : 4
-
-    # parallelize requests to policy-engine and keep them alive
-    pool_connections : 20
-
-    # retry to getConfig from policy-engine on policy-update notification
-    policy_retry_count : 5
-    policy_retry_sleep : 5
-
-    # mode of operation for the policy-handler
-    # either active or passive
-    # in passive mode the policy-hanlder will not listen to
-    #                 and will not bring the policy-updates from policy-engine
-    mode_of_operation : "active"
-
-    # config of automatic catch_up for resiliency
-    catch_up :
-        # interval in seconds on how often to call automatic catch_up
-        # example: 1200 is 20*60 seconds that is 20 minutes
-        interval : 1200
-
-    # config of periodic reconfigure-rediscover for adaptability
-    reconfigure:
-        # interval in seconds on how often to call automatic reconfigure
-        # example: 600 is 10*60 seconds that is 10 minutes
-        interval : 600
-
-    # policy-engine config
-    # These are the url of and the auth for the external system, namely the policy-engine (PDP).
-    # We obtain that info manually from PDP folks at the moment.
-    # In long run we should figure out a way of bringing that info into consul record
-    #    related to policy-engine itself.
-    # - k8s specific routing to policy-engine by hostname "pdp"
-    # - relying on dns to resolve hostname "pdp" to ip address
-    # - expecing to find "pdp" as the hostname in server cert from policy-engine
-    policy_engine :
-        url : "https://{{ .Values.config.address.policy_pdp }}.{{include "common.namespace" . }}:8081"
-        path_notifications : "/pdp/notifications"
-        path_api : "/pdp/api/"
-        headers :
-            Accept : "application/json"
-            "Content-Type" : "application/json"
-            ClientAuth : "cHl0aG9uOnRlc3Q="
-            Authorization : "Basic dGVzdHBkcDphbHBoYTEyMw=="
-            Environment : "TEST"
-        target_entity : "policy_engine"
-        # optional tls_ca_mode specifies where to find the cacert.pem for tls
-        #   can be one of these:
-        #       "cert_directory" - use the cacert.pem stored locally in cert_directory.
-        #                          this is the default if cacert.pem file is found
-        #
-        #       "os_ca_bundle"     - use the public ca_bundle provided by linux system.
-        #                          this is the default if cacert.pem file not found
-        #
-        #       "do_not_verify"  - special hack to turn off the verification by cacert and hostname
-        tls_ca_mode : "cert_directory"
-        # optional tls_wss_ca_mode specifies the same for the tls based web-socket
-        tls_wss_ca_mode : "cert_directory"
-        # optional timeout_in_secs specifies the timeout for the http requests
-        timeout_in_secs: 60
-        # optional ws_ping_interval_in_secs specifies the ping interval for the web-socket connection
-        ws_ping_interval_in_secs: 30
-    # deploy_handler config
-    #    changed from string "deployment_handler" in 2.3.1 to structure in 2.4.0
-    deploy_handler :
-        # name of deployment-handler service used by policy-handler for logging
-        target_entity : "deployment_handler"
-        # url of the deployment-handler service for policy-handler to direct the policy-updates to
-        #   - expecting dns to resolve the hostname deployment-handler to ip address
-        url : "https://deployment-handler:8443"
-        # limit the size of a single data segment for policy-update messages
-        #       from policy-handler to deployment-handler in megabytes
-        max_msg_length_mb : 5
-        query :
-            # optionally specify the tenant name for the cloudify under deployment-handler
-            #    if not specified the "default_tenant" is used by the deployment-handler
-            cfy_tenant_name : "default_tenant"
-        # optional tls_ca_mode specifies where to find the cacert.pem or skip tls verification
-        #   can be one of these:
-        #       "cert_directory" - use the cacert.pem stored locally in cert_directory.
-        #                          this is the default if cacert.pem file is found
-        #
-        #       "os_ca_bundle"     - use the public ca_bundle provided by linux system.
-        #                          this is the default if cacert.pem file not found
-        #
-        #       "do_not_verify"  - special hack to turn off the verification by cacert and hostname
-        tls_ca_mode : "cert_directory"
-        # optional timeout_in_secs specifies the timeout for the http requests
-        timeout_in_secs: 60
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml
index a1adfa1dce..0463655c79 100644
--- a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml
@@ -1,6 +1,6 @@
 #============LICENSE_START========================================================

 # ================================================================================

-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.

+# Copyright (c) 2017-2019 AT&T Intellectual Property. All rights reserved.

 # Modifications Copyright © 2018 Amdocs, Bell Canada

 # ================================================================================

 # Licensed under the Apache License, Version 2.0 (the "License");

@@ -51,6 +51,8 @@ spec:
           - kube2msb

           - --container-name

           - dcae-config-binding-service

+          - --container-name

+          - dcae-db

           - "-t"

           - "15"

         env:

diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml
index 81119c5e32..07b203699c 100644
--- a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml
@@ -1,6 +1,6 @@
 #============LICENSE_START========================================================
 #=================================================================================
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright (c) 2018-2019 AT&T Intellectual Property. All rights reserved.
 # Modifications Copyright © 2018 Amdocs, Bell Canada
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -79,20 +79,18 @@ postgres:
 
 # application image
 repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.7
+image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.9
 
 # DCAE component images to be deployed via Cloudify Manager
 # Use to override default setting in blueprints
 componentImages:
   datafile_collector: onap/org.onap.dcaegen2.collectors.datafile.datafile-app-server:1.1.1
-  deployment_handler: onap/org.onap.dcaegen2.platform.deployment-handler:3.1.0
   holmes_rules: onap/holmes/rule-management:1.2.3
   holmes_engine: onap/holmes/engine-management:1.2.2
-  policy_handler: onap/org.onap.dcaegen2.platform.policy-handler:4.6.0
   tca: onap/org.onap.dcaegen2.deployments.tca-cdap-container:1.1.0
   ves: onap/org.onap.dcaegen2.collectors.ves.vescollector:1.3.1
   snmptrap: onap/org.onap.dcaegen2.collectors.snmptrap:1.4.0
-  prh: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.2.0-SNAPSHOT
+  prh: onap/org.onap.dcaegen2.services.prh.prh-app-server:1.2.1-SNAPSHOT
   hv_ves: onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:1.1.0-SNAPSHOT
 
 # Resource Limit flavor -By Default using small
diff --git a/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml b/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml
index a4694e0e95..5b541fb19d 100644
--- a/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml
@@ -1,6 +1,6 @@
 #============LICENSE_START========================================================
 # ================================================================================
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright (c) 2018-2019 AT&T Intellectual Property. All rights reserved.
 # Modifications Copyright © 2018 Amdocs, Bell Canada
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -44,7 +44,7 @@ config:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.cm-container:1.5.0
+image: onap/org.onap.dcaegen2.deployments.cm-container:1.5.1
 pullPolicy: Always
 
 # probe configuration parameters
@@ -57,7 +57,7 @@ liveness:
   enabled: false
 
 readiness:
-  initialDelaySeconds: 10
+  initialDelaySeconds: 60
   periodSeconds: 10
 
 service:
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/.helmignore b/kubernetes/dcaegen2/charts/dcae-deployment-handler/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-config_binding_service-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/Chart.yaml
index f4770ac29f..35d892a9cf 100644
--- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-config_binding_service-inputs.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/Chart.yaml
@@ -1,7 +1,6 @@
 #============LICENSE_START========================================================
 #=================================================================================
-# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -16,8 +15,7 @@
 # limitations under the License.
 # ============LICENSE_END=========================================================
 
-#TODO would like to make this conditional, as with the other input templates
-# but having template expansion issues trying to do that
-{{ if .Values.componentImages.config_binding_service }}
-cbs_image: {{ include "common.repository" . }}/{{ .Values.componentImages.config_binding_service }}
-{{ end }}
+apiVersion: v1
+description: ONAP DCAE Deployment Handler
+name: dcae-deployment-handler
+version: 4.0.0
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/requirements.yaml
new file mode 100644
index 0000000000..d2b64d33b2
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/requirements.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~4.0.0
+    repository: '@local'
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json b/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json
new file mode 100644
index 0000000000..600f07c457
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json
@@ -0,0 +1,8 @@
+{
+    "cloudify": {
+        "protocol": "http"
+    },
+    "inventory": {
+        "protocol": "http"
+    }
+}
\ No newline at end of file
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/log/filebeat.yml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/log/filebeat.yml
new file mode 100644
index 0000000000..0e5ee9bffa
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/log/filebeat.yml
@@ -0,0 +1,72 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018-2019 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
+
+logging:
+  level: debug
+
+  # enable file rotation with default configuration
+  to_files: true
+
+  # do not log to syslog
+  to_syslog: false
+
+  files:
+    path: /usr/share/filebeat/logs
+    name: mybeat.log
+    keepfiles: 7
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/configmap.yaml
new file mode 100644
index 0000000000..39af31a4f3
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/configmap.yaml
@@ -0,0 +1,34 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{include "common.fullname" . }}-filebeat-configmap
+  namespace: {{include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/log/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml
new file mode 100644
index 0000000000..3e4e53b679
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml
@@ -0,0 +1,161 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+        - name: {{ include "common.name" . }}-readiness
+          image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+            - /root/ready.py
+          args:
+          - --container-name
+          - dcae-cloudify-manager
+          - --container-name
+          - consul-server
+          - --container-name
+          - dcae-inventory-api
+          - "-t"
+          - "45"
+          env:
+          - name: NAMESPACE
+            valueFrom:
+              fieldRef:
+                apiVersion: v1
+                fieldPath: metadata.namespace
+        - name: init-tls
+          env:
+          - name: POD_IP
+            valueFrom:
+              fieldRef:
+                apiVersion: v1
+                fieldPath: status.podIP
+          image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources: {}
+          volumeMounts:
+            - mountPath: /opt/tls/shared
+              name: tls-info
+        - name: init-consul
+          image: {{ .Values.global.consulLoaderRepository }}/{{ .Values.global.consulLoaderImage }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          args:
+          - --service
+          - "cloudify_manager|dcae-cloudify-manager.{{ include "common.namespace" . }}|80"
+          - --service
+          - "inventory|inventory.{{ include "common.namespace" . }}|8080"
+          - --key
+          - deployment_handler|/dhconfig/config.json
+          resources: {}
+          volumeMounts:
+            - mountPath: /dhconfig
+              name: dh-config
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources:
+{{ include "common.resources" . | indent 12 }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end }}
+          readinessProbe:
+            httpGet:
+              path: {{ .Values.readiness.path }}
+              port: {{ .Values.service.internalPort }}
+              scheme: {{ .Values.readiness.scheme }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+            - mountPath: /opt/app/dh/log
+              name: component-log
+            - mountPath: /opt/app/dh/etc/cert/
+              name: tls-info
+          env:
+            - name: CONSUL_HOST
+              value: consul-server.{{ include "common.namespace" . }}
+            - name: CLOUDIFY_USER
+              value: admin
+            - name: CLOUDIFY_PASSWORD
+              value: admin
+            - name: CONFIG_BINDING_SERVICE
+              value: config-binding-service
+            - name: POD_IP
+              valueFrom:
+                fieldRef:
+                  apiVersion: v1
+                  fieldPath: status.podIP
+        - name: {{ include "common.name" . }}-filebeat
+          env:
+            - name: POD_IP
+              valueFrom:
+                fieldRef:
+                  apiVersion: v1
+                  fieldPath: status.podIP
+          image: {{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}
+          imagePullPolicy: IfNotPresent
+          resources: {}
+          volumeMounts:
+          - mountPath: /var/log/onap/deployment-handler
+            name: component-log
+          - mountPath: /usr/share/filebeat/data
+            name: filebeat-data
+          - mountPath: /usr/share/filebeat/filebeat.yml
+            name: filebeat-conf
+            subPath: filebeat.yml
+      volumes:
+        - emptyDir: {}
+          name: component-log
+        - emptyDir: {}
+          name: filebeat-data
+        - configMap:
+            defaultMode: 420
+            name: {{ include "common.fullname" . }}-filebeat-configmap
+          name: filebeat-conf
+        - emptyDir: {}
+          name: tls-info
+        - configMap:
+            defaultMode: 422
+            name: {{ include "common.fullname" . }}-configmap
+          name: dh-config
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/service.yaml
new file mode 100644
index 0000000000..088d381d50
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/service.yaml
@@ -0,0 +1,43 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+
diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml
new file mode 100644
index 0000000000..d1fbe5b3b4
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml
@@ -0,0 +1,95 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+  tlsRepository: nexus3.onap.org:10001
+  tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.0
+  consulLoaderRepository: nexus3.onap.org:10001
+  consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0
+  repositoryCred:
+    user: docker
+    password: docker
+
+config:
+  logstashServiceName: log-ls
+  logstashPort: 5044
+  # Addresses of other ONAP entities
+  address:
+    consul:
+      host: consul-server
+      port: 8500
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.platform.deployment-handler:3.2.0
+pullPolicy: Always
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  # liveness not desirable for Cloudify Manager container
+  enabled: false
+
+readiness:
+  initialDelaySeconds: 30
+  periodSeconds: 30
+  path: /
+  scheme: HTTPS
+
+service:
+  type: ClusterIP
+  name: deployment-handler
+  externalPort: 8443
+  internalPort: 8443
+
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 2
+      memory: 2Gi
+    requests:
+      cpu: 1
+      memory: 1Gi
+  large:
+    limits:
+      cpu: 4
+      memory: 4Gi
+    requests:
+      cpu: 2
+      memory: 2Gi
+  unlimited: {}
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+# dcae_ns: "dcae"
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
index 307046138b..913cb714d6 100644
--- a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
@@ -45,7 +45,7 @@ readiness:
   periodSeconds: 10
 # application image
 repository: nexus3.onap.org:10001
-image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.3
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.4
 
 # Resource Limit flavor -By Default using small
 flavor: small
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/.helmignore b/kubernetes/dcaegen2/charts/dcae-policy-handler/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-deployment_handler-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-policy-handler/Chart.yaml
index 97ff037481..98844dce4f 100644
--- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-deployment_handler-inputs.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/Chart.yaml
@@ -1,7 +1,6 @@
 #============LICENSE_START========================================================
 #=================================================================================
-# Copyright (c) 2017-2018 AT&T Intellectual Property. All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -15,13 +14,8 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 # ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-{{ if .Values.componentImages.deployment_handler }}
-deployment_handler_image: {{ include "common.repository" . }}/{{ .Values.componentImages.deployment_handler }}
-{{ end }}
-application_config:
-  cloudify:
-    protocol: "http"
-  inventory:
-    protocol: "http"
+
+apiVersion: v1
+description: ONAP DCAE Policy Handler
+name: dcae-policy-handler
+version: 4.0.0
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-policy-handler/requirements.yaml
new file mode 100644
index 0000000000..d2b64d33b2
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/requirements.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~4.0.0
+    repository: '@local'
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/resources/config/config.json b/kubernetes/dcaegen2/charts/dcae-policy-handler/resources/config/config.json
new file mode 100644
index 0000000000..76aa3838aa
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/resources/config/config.json
@@ -0,0 +1,41 @@
+{
+  "policy_handler": {
+    "thread_pool_size": 4,
+    "pool_connections": 20,
+    "policy_retry_count": 5,
+    "policy_retry_sleep": 5,
+    "catch_up": {
+      "interval": 1200
+    },
+    "reconfigure": {
+      "interval": 600
+    },
+    "policy_engine": {
+      "url": "https://{{ .Values.config.address.policy_pdp }}.{{include "common.namespace" . }}:8081",
+      "path_notifications": "/pdp/notifications",
+      "path_api": "/pdp/api/",
+      "headers": {
+        "Accept": "application/json",
+        "Content-Type": "application/json",
+        "ClientAuth": "cHl0aG9uOnRlc3Q=",
+        "Authorization": "Basic dGVzdHBkcDphbHBoYTEyMw==",
+        "Environment": "TEST"
+      },
+      "target_entity": "policy_engine",
+      "tls_ca_mode": "cert_directory",
+      "tls_wss_ca_mode": "cert_directory",
+      "timeout_in_secs": 60,
+      "ws_ping_interval_in_secs": 180
+    },
+    "deploy_handler": {
+      "target_entity": "deployment_handler",
+      "url": "https://deployment-handler:8443",
+      "max_msg_length_mb": 5,
+      "query": {
+        "cfy_tenant_name": "default_tenant"
+      },
+      "tls_ca_mode": "cert_directory",
+      "timeout_in_secs": 60
+    }
+  }
+}
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/resources/log/filebeat.yml b/kubernetes/dcaegen2/charts/dcae-policy-handler/resources/log/filebeat.yml
new file mode 100644
index 0000000000..1a3f693a12
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/resources/log/filebeat.yml
@@ -0,0 +1,72 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
+
+logging:
+  level: debug
+
+  # enable file rotation with default configuration
+  to_files: true
+
+  # do not log to syslog
+  to_syslog: false
+
+  files:
+    path: /usr/share/filebeat/logs
+    name: mybeat.log
+    keepfiles: 7
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/configmap.yaml
new file mode 100644
index 0000000000..39af31a4f3
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/configmap.yaml
@@ -0,0 +1,34 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{include "common.fullname" . }}-filebeat-configmap
+  namespace: {{include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/log/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/deployment.yaml
new file mode 100644
index 0000000000..a6b87bf3eb
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/deployment.yaml
@@ -0,0 +1,157 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: 1
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+        - name: {{ include "common.name" . }}-readiness
+          image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+            - /root/ready.py
+          args:
+          - --container-name
+          - dcae-deployment-handler
+          - --container-name
+          - consul-server
+          - --container-name
+          - pdp
+          - "-t"
+          - "45"
+          env:
+          - name: NAMESPACE
+            valueFrom:
+              fieldRef:
+                apiVersion: v1
+                fieldPath: metadata.namespace
+        - name: init-tls
+          env:
+          - name: POD_IP
+            valueFrom:
+              fieldRef:
+                apiVersion: v1
+                fieldPath: status.podIP
+          image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources: {}
+          volumeMounts:
+            - mountPath: /opt/tls/shared
+              name: tls-info
+        - name: init-consul
+          image: {{ .Values.global.consulLoaderRepository }}/{{ .Values.global.consulLoaderImage }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          args:
+          - --key
+          - policy_handler|/phconfig/config.json
+          resources: {}
+          volumeMounts:
+            - mountPath: /phconfig
+              name: ph-config
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources:
+{{ include "common.resources" . | indent 12 }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end }}
+          readinessProbe:
+            httpGet:
+              path: {{ .Values.readiness.path }}
+              port: {{ .Values.service.internalPort }}
+              scheme: {{ .Values.readiness.scheme }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+            - mountPath: /opt/app/policy_handler/logs
+              name: component-log
+            - mountPath: /opt/app/policy_handler/etc/tls/certs/
+              name: tls-info
+          env:
+            - name: CONSUL_HOST
+              value: consul-server.{{ include "common.namespace" . }}
+            - name: CLOUDIFY_USER
+              value: admin
+            - name: CLOUDIFY_PASSWORD
+              value: admin
+            - name: CONFIG_BINDING_SERVICE
+              value: config-binding-service
+            - name: POD_IP
+              valueFrom:
+                fieldRef:
+                  apiVersion: v1
+                  fieldPath: status.podIP
+        - name: {{ include "common.name" . }}-filebeat
+          env:
+            - name: POD_IP
+              valueFrom:
+                fieldRef:
+                  apiVersion: v1
+                  fieldPath: status.podIP
+          image: {{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}
+          imagePullPolicy: IfNotPresent
+          resources: {}
+          volumeMounts:
+          - mountPath: /var/log/onap/deployment-handler
+            name: component-log
+          - mountPath: /usr/share/filebeat/data
+            name: filebeat-data
+          - mountPath: /usr/share/filebeat/filebeat.yml
+            name: filebeat-conf
+            subPath: filebeat.yml
+      volumes:
+        - emptyDir: {}
+          name: component-log
+        - emptyDir: {}
+          name: filebeat-data
+        - configMap:
+            defaultMode: 420
+            name: {{ include "common.fullname" . }}-filebeat-configmap
+          name: filebeat-conf
+        - emptyDir: {}
+          name: tls-info
+        - configMap:
+            defaultMode: 422
+            name: {{ include "common.fullname" . }}-configmap
+          name: ph-config
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/service.yaml
new file mode 100644
index 0000000000..088d381d50
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/templates/service.yaml
@@ -0,0 +1,43 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+
diff --git a/kubernetes/dcaegen2/charts/dcae-policy-handler/values.yaml b/kubernetes/dcaegen2/charts/dcae-policy-handler/values.yaml
new file mode 100644
index 0000000000..0494a9e1d4
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-policy-handler/values.yaml
@@ -0,0 +1,95 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+  tlsRepository: nexus3.onap.org:10001
+  tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.0
+  consulLoaderRepository: nexus3.onap.org:10001
+  consulLoaderImage: onap/org.onap.dcaegen2.deployments.consul-loader-container:1.0.0
+  repositoryCred:
+    user: docker
+    password: docker
+
+config:
+  logstashServiceName: log-ls
+  logstashPort: 5044
+  # Addresses of other ONAP entities
+  address:
+    consul:
+      host: consul-server
+      port: 8500
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.platform.policy-handler:4.6.0
+pullPolicy: Always
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  # liveness not desirable for Cloudify Manager container
+  enabled: false
+
+readiness:
+  initialDelaySeconds: 60
+  periodSeconds: 300
+  path: /healthcheck
+  scheme: HTTP
+
+service:
+  type: ClusterIP
+  name: policy-handler
+  externalPort: 25577
+  internalPort: 25577
+
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 2
+      memory: 2Gi
+    requests:
+      cpu: 1
+      memory: 1Gi
+  large:
+    limits:
+      cpu: 4
+      memory: 4Gi
+    requests:
+      cpu: 2
+      memory: 2Gi
+  unlimited: {}
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+# dcae_ns: "dcae"