Vid Standardization Config

Issue-ID: OOM-729

Change-Id: Ic5b082e2d87ca7ef7944cd1ccce635ea2309e1f5
Signed-off-by: Priyanka <Priyanka.Jain3@amdocs.com>

9 files changed, 234 insertions, 331 deletions

diff --git a/kubernetes/vid/templates/NOTES.txt b/kubernetes/vid/templates/NOTES.txt
new file mode 100644
index 0000000000..6e0b9fc06d
--- /dev/null
+++ b/kubernetes/vid/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/vid/templates/all-services.yaml b/kubernetes/vid/templates/all-services.yaml
deleted file mode 100644
index a946a2ab54..0000000000
--- a/kubernetes/vid/templates/all-services.yaml
+++ /dev/null
@@ -1,46 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableVidVidMariadb }}
-apiVersion: v1
-kind: Service
-metadata:
-  name: vid-mariadb
-  namespace: "{{ .Values.nsPrefix }}"
-spec:
-  ports:
-  - name: vid-mariadb
-    port: 3306
-  selector:
-    app: vid-mariadb
-  clusterIP: None
-#{{ end }}
-#{{ if not .Values.disableVidVidServer }}
----
-apiVersion: v1
-kind: Service
-metadata:
-  labels:
-    app: vid-server
-  name: vid-server
-  namespace: "{{ .Values.nsPrefix }}"
-spec:
-  ports:
-  - name: vid-server
-    nodePort: {{ .Values.nodePortPrefix }}00
-    port: 8080
-  selector:
-    app: vid-server
-  type: NodePort
-#{{ end }}
\ No newline at end of file
diff --git a/kubernetes/vid/templates/vid-log-configmap.yaml b/kubernetes/vid/templates/configmap.yaml
index 3a72866e0d..f7dbf07645 100644
--- a/kubernetes/vid/templates/vid-log-configmap.yaml
+++ b/kubernetes/vid/templates/configmap.yaml
@@ -12,20 +12,18 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-#{{ if not .Values.disableVidVidServer }}
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: vid-log-configmap
-  namespace: {{ .Values.nsPrefix }}
+  name: {{ include "common.fullname" . }}-log-configmap
+  namespace: {{ include "common.namespace" . }}
 data:
 {{ tpl (.Files.Glob "resources/config/log/vid/*").AsConfig . | indent 2 }}
 ---
 apiVersion: v1
 kind: ConfigMap
 metadata:
-  name: vid-filebeat-configmap
-  namespace: {{ .Values.nsPrefix }}
+  name: {{ include "common.fullname" . }}-filebeat-configmap
+  namespace: {{ include "common.namespace" . }}
 data:
 {{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
-#{{ end }}
diff --git a/kubernetes/vid/templates/deployment.yaml b/kubernetes/vid/templates/deployment.yaml
new file mode 100644
index 0000000000..89ed734dfb
--- /dev/null
+++ b/kubernetes/vid/templates/deployment.yaml
@@ -0,0 +1,162 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - {{ .Values.mariadb.nameOverride }}
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          lifecycle:
+            postStart:
+              exec:
+                command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/usr/local/tomcat/webapps/vid/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+            - name: ASDC_CLIENT_REST_HOST
+              value: sdc-be.{{ include "common.namespace" . }}-sdc
+            - name: ASDC_CLIENT_REST_AUTH
+              value: "{{ .Values.config.asdcclientrestauth }}"
+            - name: ASDC_CLIENT_REST_PORT
+              value: "{{ .Values.config.asdcclientrestport }}"
+            - name: VID_AAI_HOST
+              value: aai-service.{{ include "common.namespace" . }}-aai
+            - name: VID_AAI_PORT
+              value: "{{ .Values.config.vidaaiport }}"
+            - name: VID_ECOMP_SHARED_CONTEXT_REST_URL
+              value: http://portalapps.{{ include "common.namespace" . }}-portal:"{{ .Values.config.onapport }}"/ONAPPORTAL/context
+            - name: VID_MSO_SERVER_URL
+              value: http://mso.{{ include "common.namespace" . }}-mso:"{{ .Values.config.msoport }}"
+            - name: VID_MSO_PASS
+              value: "{{ .Values.config.vidmsopass }}"
+            - name: MSO_DME2_SERVER_URL
+              value: "{{ .Values.config.msodme2serverurl }}"
+            - name: MSO_DME2_ENABLED
+              value: {{ .Values.global.debugEnabled | default .Values.debugEnabled | quote }}
+            - name: VID_ECOMP_REDIRECT_URL
+              value: http://portalapps.{{ include "common.namespace" . }}-portal:"{{ .Values.config.onapport }}"/ONAPPORTAL/login.h\tm
+            - name: VID_ECOMP_REST_URL
+              value: http://portalapps.{{ include "common.namespace" . }}-portal:"{{ .Values.config.onapport }}"/ONAPPORTAL/auxapi
+            - name: VID_CONTACT_US_LINK
+              value: "{{ .Values.config.vidcontactuslink }}"
+            - name: VID_UEB_URL_LIST
+              value: dmaap.{{ include "common.namespace" . }}-message-router
+            - name: VID_MYSQL_HOST
+              value: "{{ .Values.config.vidmysqlhost }}"
+            - name: VID_MYSQL_PORT
+              value: "{{ .Values.config.vidmysqlport }}"
+            - name: VID_MYSQL_DBNAME
+              value: "{{ .Values.config.vidmysqldbname }}"
+            - name: VID_MYSQL_USER
+              value: "{{ .Values.config.vidmysqluser }}"
+            - name: VID_MYSQL_PASS
+              valueFrom:
+                secretKeyRef:
+                  name: {{ template "common.fullname" . }}
+                  key: vid-password
+            - name: VID_MYSQL_MAXCONNECTIONS
+              value: "{{ .Values.config.vidmysqlmaxconnections }}"
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /var/log/onap
+            name: vid-logs
+          - mountPath: /tmp/logback.xml
+            name: vid-logback
+            subPath: logback.xml
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      # side car containers
+        - name: filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - mountPath: /usr/share/filebeat/filebeat.yml
+            name: filebeat-conf
+            subPath: filebeat.yml
+          - mountPath: /var/log/onap
+            name: vid-logs
+          - mountPath: /usr/share/filebeat/data
+            name: vid-data-filebeat
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: filebeat-conf
+          configMap:
+            name: {{ include "common.fullname" . }}-filebeat-configmap
+        - name: vid-logs
+          emptyDir: {}
+        - name: vid-data-filebeat
+          emptyDir: {}
+        - name: vid-logback
+          configMap:
+            name: {{ include "common.fullname" . }}-log-configmap
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/vid/templates/vid-lfconfig-configmap.yaml b/kubernetes/vid/templates/secrets.yaml
index 2809705de9..729e0b17c0 100644
--- a/kubernetes/vid/templates/vid-lfconfig-configmap.yaml
+++ b/kubernetes/vid/templates/secrets.yaml
@@ -12,12 +12,16 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-#{{ if not .Values.disableVidVidMariadb }}
 apiVersion: v1
-kind: ConfigMap
+kind: Secret
 metadata:
-  name: vid-lfconfig-configmap
-  namespace: {{ .Values.nsPrefix }}
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+type: Opaque
 data:
-{{ tpl (.Files.Glob "resources/config/lf_config/*").AsConfig . | indent 2 }}
-#{{ end }}
+  vid-password: {{ .Values.config.vidmysqlpassword | b64enc | quote }}
diff --git a/kubernetes/vid/templates/service.yaml b/kubernetes/vid/templates/service.yaml
new file mode 100644
index 0000000000..3969d2184b
--- /dev/null
+++ b/kubernetes/vid/templates/service.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/vid/templates/vid-mariadb-deployment.yaml b/kubernetes/vid/templates/vid-mariadb-deployment.yaml
deleted file mode 100644
index 4eb46c2c02..0000000000
--- a/kubernetes/vid/templates/vid-mariadb-deployment.yaml
+++ /dev/null
@@ -1,84 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableVidVidMariadb }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
-  labels:
-    app: vid-mariadb
-  name: vid-mariadb
-  namespace: "{{ .Values.nsPrefix }}"
-spec:
-  replicas: {{ .Values.vidMariaDbReplicas }}
-  selector:
-    matchLabels:
-      app: vid-mariadb
-  template:
-    metadata:
-      labels:
-        app: vid-mariadb
-      name: vid-mariadb
-    spec:
-      containers:
-      - image: {{ .Values.image.mariadb }}
-        imagePullPolicy: {{ .Values.pullPolicy }}
-        name: vid-mariadb
-        env:
-        - name: MYSQL_DATABASE
-          value: vid_openecomp_epsdk
-        - name: MYSQL_USER
-          value: vidadmin
-        - name: MYSQL_PASSWORD
-          value: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
-        - name: MYSQL_ROOT_PASSWORD
-          value: LF+tp_1WqgSY
-        volumeMounts:
-        - mountPath: /etc/localtime
-          name: localtime
-          readOnly: true
-        - mountPath: /var/lib/mysql
-          name: vid-mariadb-data
-        - mountPath: /docker-entrypoint-initdb.d/vid-pre-init.sql
-          name: vid-lfconfig
-          subPath: vid-pre-init.sql
-        - mountPath: /etc/mysql/my.cnf
-          name: vid-lfconfig
-          subPath: my.cnf
-        ports:
-        - containerPort: 3306
-        readinessProbe:
-          tcpSocket:
-            port: 3306
-          initialDelaySeconds: 5
-          periodSeconds: 10
-      volumes:
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: vid-mariadb-data
-          persistentVolumeClaim:
-            claimName: vid-db
-        - name: vid-lfconfig
-          configMap:
-            name: vid-lfconfig-configmap
-            defaultMode: 0755
-            items:
-            - key: vid-my.cnf
-              path: my.cnf
-            - key: vid-pre-init.sql
-              path: vid-pre-init.sql
-      imagePullSecrets:
-      - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
diff --git a/kubernetes/vid/templates/vid-pv-pvc.yaml b/kubernetes/vid/templates/vid-pv-pvc.yaml
deleted file mode 100644
index 4d8db678e9..0000000000
--- a/kubernetes/vid/templates/vid-pv-pvc.yaml
+++ /dev/null
@@ -1,48 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-#{{ if not .Values.disableVidVidMariadb }}
-apiVersion: v1
-kind: PersistentVolume
-metadata:
-  name: "{{ .Values.nsPrefix }}-vid"
-  namespace: "{{ .Values.nsPrefix }}"
-  labels:
-    name: "{{ .Values.nsPrefix }}-vid"
-spec:
-  capacity:
-    storage: 2Gi
-  accessModes:
-    - ReadWriteMany
-  persistentVolumeReclaimPolicy: Retain
-  hostPath:
-    path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/vid/mariadb/data
----
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: vid-db
-  namespace: "{{ .Values.nsPrefix }}"
-spec:
-  accessModes:
-    - ReadWriteMany
-  resources:
-    requests:
-      storage: 2Gi
-  selector:
-    matchLabels:
-      name: "{{ .Values.nsPrefix }}-vid"
-#{{ end }}
diff --git a/kubernetes/vid/templates/vid-server-deployment.yaml b/kubernetes/vid/templates/vid-server-deployment.yaml
deleted file mode 100644
index 7903fb02b1..0000000000
--- a/kubernetes/vid/templates/vid-server-deployment.yaml
+++ /dev/null
@@ -1,141 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableVidVidServer }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
-  labels:
-    app: vid-server
-  name: vid-server
-  namespace: "{{ .Values.nsPrefix }}"
-spec:
-  replicas: {{ .Values.vidServerReplicas }}
-  selector:
-    matchLabels:
-      app: vid-server
-  template:
-    metadata:
-      labels:
-        app: vid-server
-      name: vid-server
-    spec:
-      initContainers:
-      - command:
-        - /root/ready.py
-        args:
-        - --container-name
-        - vid-mariadb
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: {{ .Values.image.readiness }}
-        imagePullPolicy: {{ .Values.pullPolicy }}
-        name: vid-server-readiness
-      containers:
-      - env:
-        - name: ASDC_CLIENT_REST_HOST
-          value: sdc-be.{{ .Values.nsPrefix }}
-        - name: ASDC_CLIENT_REST_AUTH
-          value: Basic dmlkOktwOGJKNFNYc3pNMFdYbGhhazNlSGxjc2UyZ0F3ODR2YW9HR21KdlV5MlU=
-        - name: ASDC_CLIENT_REST_PORT
-          value: "8080"
-        - name: VID_AAI_HOST
-          value: aai-service.{{ .Values.nsPrefix }}
-        - name: VID_AAI_PORT
-          value: "8443"
-        - name: VID_ECOMP_SHARED_CONTEXT_REST_URL
-          value: http://portalapps.{{ .Values.nsPrefix }}:8989/ONAPPORTAL/context
-        - name: VID_MSO_SERVER_URL
-          value: http://mso.{{ .Values.nsPrefix }}:8080
-        - name: VID_MSO_PASS
-          value: OBF:1ih71i271vny1yf41ymf1ylz1yf21vn41hzj1icz
-        - name: MSO_DME2_SERVER_URL
-          value: http://localhost:8081
-        - name: MSO_DME2_ENABLED
-          value: "false"
-        - name: VID_ECOMP_REDIRECT_URL
-          value: http://portalapps.{{ .Values.nsPrefix }}:8989/ONAPPORTAL/login.htm
-        - name: VID_ECOMP_REST_URL
-          value: http://portalapps.{{ .Values.nsPrefix }}:8989/ONAPPORTAL/auxapi
-        - name: VID_CONTACT_US_LINK
-          value: https://todo_contact_us_link.com
-        - name: VID_UEB_URL_LIST
-          value: dmaap.{{ .Values.nsPrefix }}
-        - name: VID_MYSQL_HOST
-          value: vid-mariadb
-        - name: VID_MYSQL_PORT
-          value: "3306"
-        - name: VID_MYSQL_DBNAME
-          value: vid_openecomp_epsdk
-        - name: VID_MYSQL_USER
-          value: vidadmin
-        - name: VID_MYSQL_PASS
-          value: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
-        - name: VID_MYSQL_MAXCONNECTIONS
-          value: "5"
-        image: {{ .Values.image.vid }}
-        imagePullPolicy: {{ .Values.pullPolicy }}
-        name: vid-server
-        lifecycle:
-          postStart:
-            exec:
-              command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/usr/local/tomcat/webapps/vid/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
-        ports:
-        - containerPort: 8080
-        volumeMounts:
-        - mountPath: /etc/localtime
-          name: localtime
-          readOnly: true
-        - mountPath: /var/log/onap
-          name: vid-logs
-        - mountPath: /tmp/logback.xml
-          name: vid-logback
-          subPath: logback.xml
-        readinessProbe:
-          tcpSocket:
-            port: 8080
-          initialDelaySeconds: 5
-          periodSeconds: 10
-      - image: {{ .Values.image.filebeat }}
-        imagePullPolicy: {{ .Values.pullPolicy }}
-        name: filebeat-onap
-        volumeMounts:
-        - mountPath: /usr/share/filebeat/filebeat.yml
-          name: filebeat-conf
-          subPath: filebeat.yml
-        - mountPath: /var/log/onap
-          name: vid-logs
-        - mountPath: /usr/share/filebeat/data
-          name: vid-data-filebeat
-      volumes:
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: filebeat-conf
-          configMap:
-            name: vid-filebeat-configmap
-        - name: vid-logs
-          emptyDir: {}
-        - name: vid-data-filebeat
-          emptyDir: {}
-        - name: vid-logback
-          configMap:
-            name: vid-log-configmap
-      imagePullSecrets:
-      - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}