VID logging adjustments

Now using org.onap.logging libs, improved formatting, and
full MDC key/values dump.

Added outgoingRequests logging of upstream in-out traffic.

See also:
VID logs to Logging Specification v1.2 (Casablanca)
https://wiki.onap.org/pages/viewpage.action?pageId=28378955

Issue-ID: VID-253

Change-Id: If1378319d6c77fef0d08adc8e5e08c98cab50580
Signed-off-by: Ittay Stern <ittay.stern@att.com>

1 files changed, 386 insertions, 299 deletions

diff --git a/kubernetes/vid/resources/config/log/vid/logback.xml b/kubernetes/vid/resources/config/log/vid/logback.xml
index 49db781b3e..7f627565c5 100644
--- a/kubernetes/vid/resources/config/log/vid/logback.xml
+++ b/kubernetes/vid/resources/config/log/vid/logback.xml
@@ -1,299 +1,386 @@
-<?xml version="1.0" encoding="UTF-8"?>

-<!--

-  ================================================================================

-  eCOMP Portal SDK

-  ================================================================================

-  Copyright (C) 2017 AT&amp;T Intellectual Property

-  ================================================================================

-  Licensed under the Apache License, Version 2.0 (the "License");

-  you may not use this file except in compliance with the License.

-  You may obtain a copy of the License at

-  

-       http://www.apache.org/licenses/LICENSE-2.0

-  

-  Unless required by applicable law or agreed to in writing, software

-  distributed under the License is distributed on an "AS IS" BASIS,

-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-  See the License for the specific language governing permissions and

-  limitations under the License.

-  ================================================================================

-  -->

-<configuration scan="true" scanPeriod="3 seconds" debug="true">

-   <!--  specify the base path of the log directory -->

-   <property name="logDir" value="/var/log/onap" />

-   <!--  specify the component name -->

-   <property name="componentName" value="vid" />

-   <!-- The directory where logs are written -->

-   <property name="logDirectory" value="${logDir}/${componentName}" />

-   <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />

-   <!--  log file names -->

-   <property name="generalLogName" value="application" />

-   <property name="errorLogName" value="error" />

-   <property name="metricsLogName" value="metrics" />

-   <property name="auditLogName" value="audit" />

-   <property name="debugLogName" value="debug" />

-   <!--  other constants -->

-   <property name="queueSize" value="256" />

-   <property name="maxFileSize" value="50MB" />

-   <property name="maxHistory" value="30" />

-   <property name="totalSizeCap" value="10GB" />

-   <!-- Example evaluator filter applied against console appender -->

-   <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">

-      <encoder>

-         <pattern>${pattern}</pattern>

-      </encoder>

-   </appender>

-   <!-- ============================================================================ -->

-   <!-- EELF Appenders -->

-   <!-- ============================================================================ -->

-   <!-- The EELFAppender is used to record events to the general application 

-    log -->

-   <appender name="EELF" class="ch.qos.logback.core.rolling.RollingFileAppender">

-      <file>${logDirectory}/${generalLogName}.log</file>

-      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">

-         <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>

-         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">

-            <maxFileSize>${maxFileSize}</maxFileSize>

-         </timeBasedFileNamingAndTriggeringPolicy>

-         <maxHistory>${maxHistory}</maxHistory>

-         <totalSizeCap>${totalSizeCap}</totalSizeCap>

-      </rollingPolicy>

-      <encoder>

-         <pattern>${pattern}</pattern>

-      </encoder>

-      <filter class="org.openecomp.portalapp.util.CustomLoggingFilter" />

-   </appender>

-   <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">

-      <queueSize>${queueSize}</queueSize>

-      <includeCallerData>true</includeCallerData>

-      <appender-ref ref="EELF" />

-   </appender>

-   <!-- EELF Security Appender. This appender is used to record security events 

-    to the security log file. Security events are separate from other loggers 

-    in EELF so that security log records can be captured and managed in a secure 

-    way separate from the other logs. This appender is set to never discard any 

-    events. -->

-   <!--     

-  <appender name="EELFSecurity"

-    class="ch.qos.logback.core.rolling.RollingFileAppender">

-    <file>${logDirectory}/${securityLogName}.log</file>

-    <rollingPolicy

-      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">

-      <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip

-      </fileNamePattern>

-      <minIndex>1</minIndex>

-      <maxIndex>9</maxIndex>

-    </rollingPolicy>

-    <triggeringPolicy

-      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">

-      <maxFileSize>5MB</maxFileSize>

-    </triggeringPolicy>

-    <encoder>

-      <pattern>${defaultPattern}</pattern>

-    </encoder>

-  </appender>

-  

-  <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">

-    <queueSize>256</queueSize>

-    <discardingThreshold>0</discardingThreshold>

-    <appender-ref ref="EELFSecurity" />

-  </appender>

-   -->

-   <!-- EELF Performance Appender. This appender is used to record performance 

-    records. -->

-   <!--

-  <appender name="EELFPerformance"

-    class="ch.qos.logback.core.rolling.RollingFileAppender">

-    <file>${logDirectory}/${performanceLogName}.log</file>

-    <rollingPolicy

-      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">

-      <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip

-      </fileNamePattern>

-      <minIndex>1</minIndex>

-      <maxIndex>9</maxIndex>

-    </rollingPolicy>

-    <triggeringPolicy

-      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">

-      <maxFileSize>5MB</maxFileSize>

-    </triggeringPolicy>

-    <encoder>

-      <outputPatternAsHeader>true</outputPatternAsHeader>

-      <pattern>${defaultPattern}</pattern>

-    </encoder>

-  </appender>

-  <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">

-    <queueSize>256</queueSize>

-    <appender-ref ref="EELFPerformance" />

-  </appender>

-  -->

-   <!-- EELF Server Appender. This appender is used to record Server related 

-    logging events. The Server logger and appender are specializations of the 

-    EELF application root logger and appender. This can be used to segregate Server 

-    events from other components, or it can be eliminated to record these events 

-    as part of the application root log. -->

-   <!--

-  <appender name="EELFServer"

-    class="ch.qos.logback.core.rolling.RollingFileAppender">

-    <file>${logDirectory}/${serverLogName}.log</file>

-    <rollingPolicy

-      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">

-      <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip

-      </fileNamePattern>

-      <minIndex>1</minIndex>

-      <maxIndex>9</maxIndex>

-    </rollingPolicy>

-    <triggeringPolicy

-      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">

-      <maxFileSize>5MB</maxFileSize>

-    </triggeringPolicy>

-    <encoder>

-        <pattern>${defaultPattern}</pattern>

-    </encoder>

-  </appender>

-  <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">

-    <queueSize>256</queueSize>

-    <appender-ref ref="EELFServer" />

-  </appender>

-   -->

-   <!-- EELF Policy Appender. This appender is used to record Policy engine 

-    related logging events. The Policy logger and appender are specializations 

-    of the EELF application root logger and appender. This can be used to segregate 

-    Policy engine events from other components, or it can be eliminated to record 

-    these events as part of the application root log. -->

-   <!--

-  <appender name="EELFPolicy"

-    class="ch.qos.logback.core.rolling.RollingFileAppender">

-    <file>${logDirectory}/${policyLogName}.log</file>

-    <rollingPolicy

-      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">

-      <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip

-      </fileNamePattern>

-      <minIndex>1</minIndex>

-      <maxIndex>9</maxIndex>

-    </rollingPolicy>

-    <triggeringPolicy

-      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">

-      <maxFileSize>5MB</maxFileSize>

-    </triggeringPolicy>

-    <encoder>

-        <pattern>${defaultPattern}</pattern>

-    </encoder>

-  </appender>

-  <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">

-    <queueSize>256</queueSize>

-    <appender-ref ref="EELFPolicy" />

-  </appender>

-  -->

-   <!-- EELF Audit Appender. This appender is used to record audit engine 

-    related logging events. The audit logger and appender are specializations 

-    of the EELF application root logger and appender. This can be used to segregate 

-    Policy engine events from other components, or it can be eliminated to record 

-    these events as part of the application root log. -->

-   <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">

-      <file>${logDirectory}/${auditLogName}.log</file>

-      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">

-         <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>

-         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">

-            <maxFileSize>${maxFileSize}</maxFileSize>

-         </timeBasedFileNamingAndTriggeringPolicy>

-         <maxHistory>${maxHistory}</maxHistory>

-         <totalSizeCap>${totalSizeCap}</totalSizeCap>

-      </rollingPolicy>

-      <encoder>

-         <pattern>${pattern}</pattern>

-      </encoder>

-   </appender>

-   <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">

-      <queueSize>${queueSize}</queueSize>

-      <appender-ref ref="EELFAudit" />

-   </appender>

-   <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">

-      <file>${logDirectory}/${metricsLogName}.log</file>

-      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">

-         <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>

-         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">

-            <maxFileSize>${maxFileSize}</maxFileSize>

-         </timeBasedFileNamingAndTriggeringPolicy>

-         <maxHistory>${maxHistory}</maxHistory>

-         <totalSizeCap>${totalSizeCap}</totalSizeCap>

-      </rollingPolicy>

-      <encoder>

-         <pattern>${pattern}</pattern>

-      </encoder>

-   </appender>

-   <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">

-      <queueSize>${queueSize}</queueSize>

-      <appender-ref ref="EELFMetrics" />

-   </appender>

-   <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">

-      <file>${logDirectory}/${errorLogName}.log</file>

-      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">

-         <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>

-         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">

-            <maxFileSize>${maxFileSize}</maxFileSize>

-         </timeBasedFileNamingAndTriggeringPolicy>

-         <maxHistory>${maxHistory}</maxHistory>

-         <totalSizeCap>${totalSizeCap}</totalSizeCap>

-      </rollingPolicy>

-      <encoder>

-         <pattern>${pattern}</pattern>

-      </encoder>

-   </appender>

-   <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">

-      <queueSize>${queueSize}</queueSize>

-      <appender-ref ref="EELFError" />

-   </appender>

-   <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">

-      <file>${logDirectory}/${debugLogName}.log</file>

-      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">

-         <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>

-         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">

-            <maxFileSize>${maxFileSize}</maxFileSize>

-         </timeBasedFileNamingAndTriggeringPolicy>

-         <maxHistory>${maxHistory}</maxHistory>

-         <totalSizeCap>${totalSizeCap}</totalSizeCap>

-      </rollingPolicy>

-      <encoder>

-         <pattern>${pattern}</pattern>

-      </encoder>

-   </appender>

-   <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">

-      <queueSize>${queueSize}</queueSize>

-      <appender-ref ref="EELFDebug" />

-   </appender>

-   <!-- ============================================================================ -->

-   <!--  EELF loggers -->

-   <!-- ============================================================================ -->

-   <logger name="com.att.eelf" level="debug" additivity="false">

-      <appender-ref ref="asyncEELF" />

-   </logger>

-   <!--

-  <logger name="com.att.eelf.security" level="info" additivity="false">

-    <appender-ref ref="asyncEELFSecurity" />

-  </logger>

-  <logger name="com.att.eelf.perf" level="info" additivity="false">

-    <appender-ref ref="asyncEELFPerformance" />

-  </logger>

-  <logger name="com.att.eelf.server" level="info" additivity="false">

-    <appender-ref ref="asyncEELFServer" />

-  </logger>

-  <logger name="com.att.eelf.policy" level="info" additivity="false">

-    <appender-ref ref="asyncEELFPolicy" />

-  </logger>

-  -->

-   <logger name="com.att.eelf.audit" level="info" additivity="false">

-      <appender-ref ref="asyncEELFAudit" />

-   </logger>

-   <logger name="com.att.eelf.metrics" level="info" additivity="false">

-      <appender-ref ref="asyncEELFMetrics" />

-   </logger>

-   <logger name="com.att.eelf.error" level="info" additivity="false">

-      <appender-ref ref="asyncEELFError" />

-   </logger>

-   <logger name="com.att.eelf.debug" level="debug" additivity="false">

-      <appender-ref ref="asyncEELFDebug" />

-   </logger>

-   <root level="INFO">

-      <appender-ref ref="asyncEELF" />

-   </root>

-</configuration>

+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  ================================================================================
+  eCOMP Portal SDK
+  ================================================================================
+  Copyright (C) 2017 AT&T Intellectual Property
+  ================================================================================
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+  
+       http://www.apache.org/licenses/LICENSE-2.0
+  
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+  ================================================================================
+  -->
+<configuration scan="true" scanPeriod="3 seconds" debug="true">
+   <!--  specify the component name -->
+   <property name="componentName" value="vid"/>
+   <!--  specify the base path of the log directory -->
+   <property name="logDirPrefix" value="/var/log/onap" />
+   <!-- The directory where logs are written -->
+   <property name="logDirectory" value="${logDirPrefix}/${componentName}" />
+
+   <!--  log file names -->
+   <property name="generalLogName" value="application" />
+   <property name="errorLogName" value="error" />
+   <property name="metricsLogName" value="metrics" />
+   <property name="auditLogName" value="audit" />
+   <property name="debugLogName" value="debug" />
+   <property name="outgoingRequestsLogName" value="outgoingRequests" />
+
+   <!--  other constants -->
+   <property name="queueSize" value="256" />
+   <property name="maxFileSize" value="50MB" />
+   <property name="maxHistory" value="30" />
+   <property name="totalSizeCap" value="10GB" />
+
+  <!-- ONAP Application Logging Specification v1.2 (Casablanca)
+       https://wiki.onap.org/pages/viewpage.action?pageId=28378955 -->
+
+   <property name="auditLoggerPattern"
+     value="%X{EntryTimestamp}|%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX,UTC}|%X{RequestID}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level||%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|||%marker|%mdc|||%msg%n"/>
+
+   <property name="metricsLoggerPattern"
+     value="%X{InvokeTimestamp}|%X{LogTimestamp}|%X{RequestID}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|0|%X{ServerIPAddress}|%replace(%X{ElapsedTime}){' ms',''}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVisualEntity}|%marker|%mdc|%X{CustomField3}|%X{CustomField4}| %msg%nopexception%n" />
+
+   <property name="errorLoggerPattern"
+     value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{AlertSeverity}|%X{ErrorCode}|%X{ErrorDescription}| %msg%nopexception%n" />
+
+   <property name="debugLoggerPattern" value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestID}|%msg %nopexception%replace(%xThrowable){'[\r\n]+', '\\\\n'}|^%n" />
+
+   <!-- use %class so library logging calls yield their class name -->
+   <property name="applicationLoggerPattern"
+     value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%.-5level|%class{36}| %msg%n" />
+
+
+
+   <!-- Example evaluator filter applied against console appender -->
+   <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+      <encoder>
+         <pattern>${debugLoggerPattern}</pattern>
+      </encoder>
+   </appender>
+
+   <!-- ============================================================================ -->
+   <!-- EELF Appenders -->
+   <!-- ============================================================================ -->
+
+   <!-- The EELFAppender is used to record events to the general application log -->
+   <appender name="EELF" class="ch.qos.logback.core.rolling.RollingFileAppender">
+      <file>${logDirectory}/${generalLogName}.log</file>
+      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+         <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+            <maxFileSize>${maxFileSize}</maxFileSize>
+         </timeBasedFileNamingAndTriggeringPolicy>
+         <maxHistory>${maxHistory}</maxHistory>
+         <totalSizeCap>${totalSizeCap}</totalSizeCap>
+      </rollingPolicy>
+      <encoder>
+         <pattern>${applicationLoggerPattern}</pattern>
+      </encoder>
+      <filter class="org.onap.portalapp.util.CustomLoggingFilter" />
+   </appender>
+
+   <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+      <queueSize>${queueSize}</queueSize>
+      <includeCallerData>true</includeCallerData>
+      <appender-ref ref="EELF" />
+   </appender>
+
+   <!-- EELF Security Appender. This appender is used to record security events
+    to the security log file. Security events are separate from other loggers 
+    in EELF so that security log records can be captured and managed in a secure 
+    way separate from the other logs. This appender is set to never discard any 
+    events. -->
+   <!--     
+  <appender name="EELFSecurity"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${securityLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <discardingThreshold>0</discardingThreshold>
+    <appender-ref ref="EELFSecurity" />
+  </appender>
+   -->
+   <!-- EELF Performance Appender. This appender is used to record performance 
+    records. -->
+   <!--
+  <appender name="EELFPerformance"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${performanceLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <outputPatternAsHeader>true</outputPatternAsHeader>
+      <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFPerformance" />
+  </appender>
+  -->
+   <!-- EELF Server Appender. This appender is used to record Server related 
+    logging events. The Server logger and appender are specializations of the 
+    EELF application root logger and appender. This can be used to segregate Server 
+    events from other components, or it can be eliminated to record these events 
+    as part of the application root log. -->
+   <!--
+  <appender name="EELFServer"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${serverLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+        <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFServer" />
+  </appender>
+   -->
+   <!-- EELF Policy Appender. This appender is used to record Policy engine 
+    related logging events. The Policy logger and appender are specializations 
+    of the EELF application root logger and appender. This can be used to segregate 
+    Policy engine events from other components, or it can be eliminated to record 
+    these events as part of the application root log. -->
+   <!--
+  <appender name="EELFPolicy"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${policyLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+        <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFPolicy" />
+  </appender>
+  -->
+   <!-- EELF Audit Appender. This appender is used to record audit engine 
+    related logging events. The audit logger and appender are specializations 
+    of the EELF application root logger and appender. This can be used to segregate 
+    Policy engine events from other components, or it can be eliminated to record 
+    these events as part of the application root log. -->
+   <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">
+      <file>${logDirectory}/${auditLogName}.log</file>
+      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+         <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+            <maxFileSize>${maxFileSize}</maxFileSize>
+         </timeBasedFileNamingAndTriggeringPolicy>
+         <maxHistory>${maxHistory}</maxHistory>
+         <totalSizeCap>${totalSizeCap}</totalSizeCap>
+      </rollingPolicy>
+      <encoder>
+         <pattern>${auditLoggerPattern}</pattern>
+      </encoder>
+   </appender>
+   <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+      <queueSize>${queueSize}</queueSize>
+      <appender-ref ref="EELFAudit" />
+      <includeCallerData>true</includeCallerData>
+   </appender>
+
+   <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+      <filter class="ch.qos.logback.core.filter.EvaluatorFilter">
+        <evaluator class="ch.qos.logback.classic.boolex.OnMarkerEvaluator">
+          <marker>INVOKE</marker>
+          <marker>INVOKE-RETURN</marker>
+        </evaluator>
+        <onMismatch>DENY</onMismatch>
+        <onMatch>ACCEPT</onMatch>
+      </filter>
+      <file>${logDirectory}/${metricsLogName}.log</file>
+      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+         <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+            <maxFileSize>${maxFileSize}</maxFileSize>
+         </timeBasedFileNamingAndTriggeringPolicy>
+         <maxHistory>${maxHistory}</maxHistory>
+         <totalSizeCap>${totalSizeCap}</totalSizeCap>
+      </rollingPolicy>
+      <encoder>
+      <pattern>${metricsLoggerPattern}</pattern>
+      </encoder>
+   </appender>
+   <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+      <queueSize>${queueSize}</queueSize>
+      <appender-ref ref="EELFMetrics" />
+      <includeCallerData>true</includeCallerData>
+   </appender>
+
+   <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">
+      <filter class="ch.qos.logback.classic.filter.LevelFilter">
+        <level>ERROR</level>
+        <onMatch>ACCEPT</onMatch>
+        <onMismatch>NEUTRAL</onMismatch>
+      </filter>
+      <filter class="ch.qos.logback.classic.filter.LevelFilter">
+        <level>WARN</level>
+        <onMatch>ACCEPT</onMatch>
+        <onMismatch>DENY</onMismatch>
+      </filter>
+      <file>${logDirectory}/${errorLogName}.log</file>
+      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+         <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+            <maxFileSize>${maxFileSize}</maxFileSize>
+         </timeBasedFileNamingAndTriggeringPolicy>
+         <maxHistory>${maxHistory}</maxHistory>
+         <totalSizeCap>${totalSizeCap}</totalSizeCap>
+      </rollingPolicy>
+      <encoder>
+        <pattern>${errorLoggerPattern}</pattern>
+      </encoder>
+   </appender>
+
+   <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+      <queueSize>${queueSize}</queueSize>
+      <appender-ref ref="EELFError" />
+      <includeCallerData>true</includeCallerData>
+   </appender>
+
+   <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">
+      <file>${logDirectory}/${debugLogName}.log</file>
+      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+         <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+            <maxFileSize>${maxFileSize}</maxFileSize>
+         </timeBasedFileNamingAndTriggeringPolicy>
+         <maxHistory>${maxHistory}</maxHistory>
+         <totalSizeCap>${totalSizeCap}</totalSizeCap>
+      </rollingPolicy>
+      <encoder>
+         <pattern>${debugLoggerPattern}</pattern>
+      </encoder>
+   </appender>
+   <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+      <queueSize>${queueSize}</queueSize>
+      <appender-ref ref="EELFDebug" />
+      <includeCallerData>true</includeCallerData>
+   </appender>
+
+   <appender name="OutgoingRequests" class="ch.qos.logback.core.rolling.RollingFileAppender">
+      <file>${logDirectory}/${outgoingRequestsLogName}.log</file>
+      <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+         <fileNamePattern>${logDirectory}/${outgoingRequestsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+         <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+            <maxFileSize>${maxFileSize}</maxFileSize>
+         </timeBasedFileNamingAndTriggeringPolicy>
+         <maxHistory>${maxHistory}</maxHistory>
+         <totalSizeCap>${totalSizeCap}</totalSizeCap>
+      </rollingPolicy>
+      <encoder>
+         <pattern>${debugLoggerPattern}</pattern>
+      </encoder>
+   </appender>
+   <appender name="asyncOutgoingRequests" class="ch.qos.logback.classic.AsyncAppender">
+      <queueSize>${queueSize}</queueSize>
+      <appender-ref ref="OutgoingRequests" />
+      <includeCallerData>true</includeCallerData>
+   </appender>
+
+
+   <!-- ============================================================================ -->
+   <!--  EELF loggers -->
+   <!-- ============================================================================ -->
+   <logger name="com.att.eelf" level="debug" additivity="false">
+      <appender-ref ref="asyncEELF" />
+   </logger>
+
+   <!--
+  <logger name="com.att.eelf.security" level="info" additivity="false">
+    <appender-ref ref="asyncEELFSecurity" />
+  </logger>
+  <logger name="com.att.eelf.perf" level="info" additivity="false">
+    <appender-ref ref="asyncEELFPerformance" />
+  </logger>
+  <logger name="com.att.eelf.server" level="info" additivity="false">
+    <appender-ref ref="asyncEELFServer" />
+  </logger>
+  <logger name="com.att.eelf.policy" level="info" additivity="false">
+    <appender-ref ref="asyncEELFPolicy" />
+  </logger>
+  -->
+
+   <logger name="org.onap.logging.filter.base.AbstractAuditLogFilter" level="info" additivity="false">
+      <appender-ref ref="asyncEELFAudit" />
+   </logger>
+
+   <logger name="org.onap.logging.filter.base.AbstractMetricLogFilter" level="info" additivity="false">
+      <appender-ref ref="asyncEELFMetrics" />
+   </logger>
+
+   <logger name="com.att.eelf.error" level="info" additivity="false">
+      <appender-ref ref="asyncEELFError" />
+      <appender-ref ref="asyncEELFDebug" />
+   </logger>
+
+   <logger name="com.att.eelf.debug" level="debug" additivity="false">
+      <appender-ref ref="asyncEELFDebug" />
+   </logger>
+
+   <logger name="http.requests.outgoing" level="DEBUG" additivity="false">
+      <appender-ref ref="asyncOutgoingRequests"/>
+   </logger>
+
+   <root level="INFO">
+      <appender-ref ref="asyncEELF" />
+      <appender-ref ref="asyncEELFError" />
+   </root>
+
+</configuration>