Remove catalog component from VFC

Because Modeling project has created etsicatalog repo to intent to provide common ETSI catalog service,
VF-C catalog migrates to modeling can help reduce duplication of work and promote unified architecture.

This has reported in Architecture meeting 2019-10-15,and also been confirmed during VF-C Frankfurt Architecture Review.

So the corresponding catalog chart need also be removed

Change-Id: I63172ee17d8ffcdb59ac730c05d85b9a63e4d7a0
Issue-ID: VFC-1649
Signed-off-by: yangyan <yangyanyj@chinamobile.com>

6 files changed, 0 insertions, 315 deletions

diff --git a/kubernetes/vfc/charts/vfc-catalog/templates/configmap.yaml b/kubernetes/vfc/charts/vfc-catalog/templates/configmap.yaml
deleted file mode 100644
index 1d0751a01b..0000000000
--- a/kubernetes/vfc/charts/vfc-catalog/templates/configmap.yaml
+++ /dev/null
@@ -1,21 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-logging-configmap
-  namespace: {{ include "common.namespace" . }}
-data:
-{{ tpl (.Files.Glob "resources/config/logging/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-catalog/templates/deployment.yaml b/kubernetes/vfc/charts/vfc-catalog/templates/deployment.yaml
deleted file mode 100644
index 028b164e00..0000000000
--- a/kubernetes/vfc/charts/vfc-catalog/templates/deployment.yaml
+++ /dev/null
@@ -1,150 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-      annotations:
-        sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
-    spec:
-      initContainers:
-      - command:
-        - /root/ready.py
-        args:
-        - --container-name
-        - {{ .Values.config.mariadbService }}
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: {{ include "common.name" . }}-readiness
-      containers:
-        - name: {{ include "common.name" . }}
-          command:
-            - sh
-          args:
-            - -c
-            - 'MYSQL_AUTH=root:${MYSQL_ROOT_PASSWORD} ./docker-entrypoint.sh'
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          # disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{ if .Values.liveness.enabled }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end }}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-            - name: MSB_PROTO
-              value: "{{ .Values.global.config.msbprotocol }}"
-            - name: SSL_ENABLED
-              value: "{{ .Values.global.config.ssl_enabled }}"
-            - name: MSB_ADDR
-              value: "{{ .Values.global.config.msbServiceName }}:{{ .Values.global.config.msbPort }}"
-            - name: MYSQL_ADDR
-              value: "{{ .Values.config.mariadbService }}:{{ .Values.config.mariadbPort }}"
-            - name: MYSQL_ROOT_USER
-              value: "{{ .Values.global.config.mariadb_admin }}"
-            - name: MYSQL_ROOT_PASSWORD
-              {{- include "common.secret.envFromSecret" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 14}}
-            - name: REDIS_ADDR
-              value: "{{ .Values.global.config.redisServiceName }}:{{ .Values.global.config.redisPort }}"
-            - name: REG_TO_MSB_WHEN_START
-              value: "{{ .Values.global.config.reg_to_msb_when_start }}"
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-catalog
-            mountPath: /service/vfc/nfvo/catalog/static
-          - name: {{ include "common.fullname" . }}-localtime
-            mountPath: /etc/localtime
-            readOnly: true
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          - name: {{ include "common.fullname" . }}-logconfig
-            mountPath: /opt/vfc/catalog/config/log.yml
-            subPath: log.yml
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-
-        # side car containers
-        - name: {{ include "common.name" . }}-filebeat-onap
-          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          volumeMounts:
-          - name: {{ include "common.fullname" . }}-filebeat-conf
-            mountPath: /usr/share/filebeat/filebeat.yml
-            subPath: filebeat.yml
-          - name: {{ include "common.fullname" . }}-logs
-            mountPath: /var/log/onap
-          - name: {{ include "common.fullname" . }}-data-filebeat
-            mountPath: /usr/share/filebeat/data
-
-      volumes:
-        - name: {{ include "common.fullname" . }}-catalog
-        {{- if .Values.persistence.enabled }}
-          persistentVolumeClaim:
-            claimName: {{ include "common.fullname" . }}
-        {{- else }}
-          emptyDir: {}
-        {{- end }}
-        - name: {{ include "common.fullname" . }}-localtime
-          hostPath:
-            path: /etc/localtime
-        - name:  {{ include "common.fullname" . }}-logs
-          emptyDir: {}
-        - name: {{ include "common.fullname" . }}-logconfig
-          configMap:
-            name : {{ include "common.fullname" . }}-logging-configmap
-
-        - name: {{ include "common.fullname" . }}-filebeat-conf
-          configMap:
-            name: {{ include "common.release" . }}-vfc-filebeat-configmap
-        - name: {{ include "common.fullname" . }}-data-filebeat
-          emptyDir: {}
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/vfc/charts/vfc-catalog/templates/pv.yaml b/kubernetes/vfc/charts/vfc-catalog/templates/pv.yaml
deleted file mode 100644
index d672025068..0000000000
--- a/kubernetes/vfc/charts/vfc-catalog/templates/pv.yaml
+++ /dev/null
@@ -1,39 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-{{- if eq "True" (include "common.needPV" .) -}}
-kind: PersistentVolume
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-    name: {{ include "common.fullname" . }}
-spec:
-  capacity:
-    storage: {{ .Values.persistence.size}}
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
-  storageClassName: "{{ include "common.fullname" . }}-data"
-  hostPath:
-    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
-{{- end -}}
-{{- end -}}
diff --git a/kubernetes/vfc/charts/vfc-catalog/templates/pvc.yaml b/kubernetes/vfc/charts/vfc-catalog/templates/pvc.yaml
deleted file mode 100644
index e04a0b3ed3..0000000000
--- a/kubernetes/vfc/charts/vfc-catalog/templates/pvc.yaml
+++ /dev/null
@@ -1,38 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-{{- if .Values.persistence.annotations }}
-  annotations:
-{{ toYaml .Values.persistence.annotations | indent 4 }}
-{{- end }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  storageClassName: {{ include "common.storageClass" . }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.size }}
-{{- end -}}
diff --git a/kubernetes/vfc/charts/vfc-catalog/templates/secrets.yaml b/kubernetes/vfc/charts/vfc-catalog/templates/secrets.yaml
deleted file mode 100644
index d053c484be..0000000000
--- a/kubernetes/vfc/charts/vfc-catalog/templates/secrets.yaml
+++ /dev/null
@@ -1,15 +0,0 @@
-# Copyright (c) 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-{{ include "common.secret" . }}
diff --git a/kubernetes/vfc/charts/vfc-catalog/templates/service.yaml b/kubernetes/vfc/charts/vfc-catalog/templates/service.yaml
deleted file mode 100644
index a9c382a3f7..0000000000
--- a/kubernetes/vfc/charts/vfc-catalog/templates/service.yaml
+++ /dev/null
@@ -1,52 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-    msb.onap.org/service-info: '[
-      {
-          "serviceName": "catalog",
-          "version": "v1",
-          "url": "/api/catalog/v1",
-          "protocol": "REST",
-          "port": "{{.Values.service.externalPort}}",
-          "enable_ssl": {{ .Values.global.config.ssl_enabled }},
-          "visualRange":"1"
-      }
-      ]'
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}