Add SDC DCAE helm charts

Add SDC DCAE helm charts

Change-Id: I2b665a2a957274719a3eefad347951a1361d5064
Issue-ID: OOM-1113
Signed-off-by: Areli, Fuss (af732p) <af732p@att.com>

3 files changed, 213 insertions, 0 deletions

diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt
new file mode 100644
index 0000000000..41f9706fec
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml
new file mode 100644
index 0000000000..c6cc67e997
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml
@@ -0,0 +1,124 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - name: {{ include "common.name" . }}-readiness
+        command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - "sdc-dcae-be"
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          - containerPort: {{ .Values.service.internalPort2 }}
+          {{ if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end }}
+          readinessProbe:
+            httpGet:
+              path: /healthcheck
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          - name: ENVNAME
+            value: {{ .Values.global.env.name }}
+          - name: JAVA_OPTIONS
+            value: {{ .Values.config.javaOptions }}
+          - name: HOST_IP
+            valueFrom:
+              fieldRef:
+                fieldPath: status.podIP
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-environments
+            mountPath: /var/opt/dcae-be/chef-solo/environments/
+          - name: {{ include "common.fullname" . }}-localtime
+            mountPath: /etc/localtime
+            readOnly: true
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+        # side car containers
+        - name: {{ include "common.name" . }}-filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-filebeat-conf
+            mountPath: /usr/share/filebeat/filebeat.yml
+            subPath: filebeat.yml
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap
+          - name: {{ include "common.fullname" . }}-data-filebeat
+            mountPath: /usr/share/filebeat/data
+      volumes:
+      - name: {{ include "common.fullname" . }}-localtime
+        hostPath:
+          path: /etc/localtime
+      - name: {{ include "common.fullname" . }}-filebeat-conf
+        configMap:
+          name: {{ .Release.Name }}-sdc-filebeat-configmap
+      - name: {{ include "common.fullname" . }}-data-filebeat
+        emptyDir: {}
+      - name: {{ include "common.fullname" . }}-environments
+        configMap:
+          name: {{ .Release.Name }}-sdc-environments-configmap
+          defaultMode: 0755
+      - name:  {{ include "common.fullname" . }}-logs
+        emptyDir: {}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml
new file mode 100644
index 0000000000..6595a04d57
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml
@@ -0,0 +1,56 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+    msb.onap.org/service-info: '[
+      {
+          "serviceName": "dcae-be",
+          "version": "v1",
+          "url": "/dcae",
+          "protocol": "REST",
+          "port": "{{ .Values.service.internalPort2 }}",
+          "visualRange": "1"
+      }
+    ]'
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    - port: {{ .Values.service.internalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.service.portName2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.service.portName2 }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}