Added apex-pdp to policy

Adding helm chart to deploy the newly created apex-pdp docker image

Issue-ID: POLICY-866
Change-Id: I20d488880ff5198624796f3d3d67431305d374e2
Signed-off-by: mmis <michael.morris@ericsson.com>

4 files changed, 206 insertions, 0 deletions

diff --git a/kubernetes/policy/charts/policy-apex-pdp/templates/NOTES.txt b/kubernetes/policy/charts/policy-apex-pdp/templates/NOTES.txt
new file mode 100644
index 0000000000..c882c3385e
--- /dev/null
+++ b/kubernetes/policy/charts/policy-apex-pdp/templates/NOTES.txt
@@ -0,0 +1,37 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/policy/charts/policy-apex-pdp/templates/configmap.yaml b/kubernetes/policy/charts/policy-apex-pdp/templates/configmap.yaml
new file mode 100644
index 0000000000..d35b5de4c2
--- /dev/null
+++ b/kubernetes/policy/charts/policy-apex-pdp/templates/configmap.yaml
@@ -0,0 +1,26 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+
diff --git a/kubernetes/policy/charts/policy-apex-pdp/templates/service.yaml b/kubernetes/policy/charts/policy-apex-pdp/templates/service.yaml
new file mode 100644
index 0000000000..c90d76efc5
--- /dev/null
+++ b/kubernetes/policy/charts/policy-apex-pdp/templates/service.yaml
@@ -0,0 +1,44 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+  sessionAffinity: None
diff --git a/kubernetes/policy/charts/policy-apex-pdp/templates/statefulset.yaml b/kubernetes/policy/charts/policy-apex-pdp/templates/statefulset.yaml
new file mode 100644
index 0000000000..a1083b2809
--- /dev/null
+++ b/kubernetes/policy/charts/policy-apex-pdp/templates/statefulset.yaml
@@ -0,0 +1,99 @@
+#  ============LICENSE_START=======================================================
+#   Copyright (C) 2018 Ericsson. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+#  SPDX-License-Identifier: Apache-2.0
+#  ============LICENSE_END=========================================================
+
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  serviceName: {{ include "common.servicename" . }}
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      app: {{ include "common.name" . }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          command:
+          - /opt/app/policy/apex-pdp/bin/apexEngine.sh
+          - -c
+          - /home/apexuser/config/config.json
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.externalPort }}
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.externalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{- end }}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.externalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          - name: REPLICAS
+            value: "{{ .Values.replicaCount }}"
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /var/log/onap
+            name: policy-logs
+          - mountPath: /home/apexuser/config/config.json
+            name: apexconfig
+            subpath: config.json
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: policy-logs
+          emptyDir: {}
+        - name: apexconfig
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: config.json
+              path: config.json
+              mode: 0755
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"