Add topology helm charts for CMSO Dublin

Issue-ID: OPTFRA-470
Change-Id: I21754beae34b3d3f588f9ed13a463eafbfd48ebb
Signed-off-by: Jerry Flood <jflood@att.com>

9 files changed, 603 insertions, 0 deletions

diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/Chart.yaml b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/Chart.yaml
new file mode 100644
index 0000000000..258d9ee317
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Chart for Change Management Service Orchestrator (CMSO) Service
+name: oof-cmso-topology
+version: 4.0.0
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/cadi.properties b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/cadi.properties
new file mode 100644
index 0000000000..9a6b91c602
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/cadi.properties
@@ -0,0 +1,21 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==============================================
+# Copyright (c) 2019 AT&T Intellectual Property.
+# =======================================================================
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain a 
+# copy of the License at
+# 
+#        http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software 
+# distributed under the License is distributed on an "AS IS" BASIS, 
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express 
+# or implied. See the License for the specific language governing 
+# permissions and limitations under the License.
+# ============LICENSE_END=================================================
+# 
+#-------------------------------------------------------------------------------
+cadi_loglevel=DEBUG
+cadi_prop_files=src/main/resources/aaf/org.onap.oof.props
+
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/logback.xml b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/logback.xml
new file mode 100644
index 0000000000..e4386fd249
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/logback.xml
@@ -0,0 +1,253 @@
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+	<jmxConfigurator />
+	<!-- Example evaluator filter applied against console appender -->
+<property name="p_tim" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}"/>
+		<property name="p_lvl" value="%level"/>
+		<property name="p_log" value="%logger"/>
+		<property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+		<property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+		<property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+		<property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+		<property name="p_thr" value="%thread"/>
+		<property name="defaultPattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+		<property name="debugPattern" value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n"/>
+
+		<!-- Example evaluator filter applied against console appender -->
+		<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+				<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+						<level>INFO</level>
+				</filter>
+				<encoder>
+					<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n</pattern>
+				</encoder>
+		</appender>
+
+		<appender name="ERROR"
+				class="ch.qos.logback.core.rolling.RollingFileAppender">
+				<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+						<level>INFO</level>
+				</filter>
+				<file>${logDirectory}/error2.log</file>
+				<append>true</append>
+				<encoder>
+						<pattern>${defaultPattern}</pattern>
+				</encoder>
+				<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+					<fileNamePattern>${outputDirectory}/cmso/error.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+					<maxFileSize>50MB</maxFileSize>
+					<maxHistory>30</maxHistory>
+					<totalSizeCap>10GB</totalSizeCap>
+				</rollingPolicy>
+				<triggeringPolicy
+						class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+						<maxFileSize>10MB</maxFileSize>
+				</triggeringPolicy>
+		</appender>
+
+		<appender name="DEBUG"
+				class="ch.qos.logback.core.rolling.RollingFileAppender">
+				<file>${logDirectory}/debug.log</file>
+				<append>true</append>
+				<encoder>
+						<pattern>${debugPattern}</pattern>
+				</encoder>
+				<rollingPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+					<fileNamePattern>${outputDirectory}/cmso/debug.%d{yyyy-MM-dd}.%i.log.zip</fileNamePattern>
+					<maxFileSize>50MB</maxFileSize>
+					<maxHistory>30</maxHistory>
+					<totalSizeCap>10GB</totalSizeCap>
+				</rollingPolicy>
+		</appender>
+
+
+	<appender name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/audit.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/audit.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender name="asyncEELFAudit"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/metric.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+				%msg%n</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/metric.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender name="asyncEELFMetrics"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<!-- SECURITY related loggers -->
+	<appender name="SECURITY"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/security.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/security.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender name="asyncEELFSecurity"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="SECURITY" />
+	</appender>
+	<!-- AAF related loggers -->
+	<logger name="org.onap.aaf" level="INFO" additivity="true">
+		<appender-ref ref="DEBUG" />
+	</logger>
+	<logger name="org.apache.catalina.core" level="INFO"
+		additivity="true">
+		<appender-ref ref="DEBUG" />
+	</logger>
+	<logger name="org.onap.cmso" level="INFO"
+		additivity="true">
+		<appender-ref ref="ERROR" />
+	</logger>
+
+	<!-- CLDS related loggers -->
+	<logger name="com.att.eelf.error" level="OFF" additivity="true">
+		<appender-ref ref="ERROR" />
+	</logger>
+	<!-- EELF related loggers -->
+	<logger name="com.att.eelf.audit" level="INFO"
+		additivity="false">
+		<appender-ref ref="asyncEELFAudit" />
+	</logger>
+	<logger name="com.att.eelf.metrics" level="DEBUG"
+		additivity="false">
+		<appender-ref ref="asyncEELFMetrics" />
+	</logger>
+	<logger name="com.att.eelf.security" level="DEBUG"
+		additivity="false">
+		<appender-ref ref="asyncEELFSecurity" />
+	</logger>
+
+	<!-- Spring related loggers -->
+	<logger name="org.springframework" level="DEBUG" />
+
+	<!-- Other Loggers that may help troubleshoot -->
+	<logger name="org.apache" level="DEBUG" />
+
+	<!-- logback internals logging -->
+	<logger name="ch.qos.logback.classic" level="INFO" />
+	<logger name="ch.qos.logback.core" level="INFO" />
+
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+		</filter>
+		<file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+		</filter>
+		<file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<logger name="AuditRecord" level="INFO" additivity="FALSE">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="AuditRecord_DirectCall" level="INFO"
+		additivity="FALSE">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="PerfTrackerRecord" level="INFO" additivity="FALSE">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<root level="DEBUG">
+		<appender-ref ref="DEBUG" />
+		<appender-ref ref="STDOUT" />
+	</root>
+</included>
+
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/topology.properties b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/topology.properties
new file mode 100644
index 0000000000..5ca252f9bc
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/resources/config/topology.properties
@@ -0,0 +1,30 @@
+#-------------------------------------------------------------------------------
+# Copyright � 2017-2019 AT&T Intellectual Property.
+# Modifications Copyright � 2018 IBM.
+# 
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# 
+# 
+# Unless otherwise specified, all documentation contained herein is licensed
+# under the Creative Commons License, Attribution 4.0 Intl. (the �??License�?�);
+# you may not use this documentation except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#         https://creativecommons.org/licenses/by/4.0/
+# 
+# Unless required by applicable law or agreed to in writing, documentation
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#-------------------------------------------------------------------------------
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/NOTES.txt b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/NOTES.txt
new file mode 100644
index 0000000000..1103affff1
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/configmap.yaml b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/configmap.yaml
new file mode 100644
index 0000000000..c4397359dc
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/configmap.yaml
@@ -0,0 +1,26 @@
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/deployment.yaml b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/deployment.yaml
new file mode 100644
index 0000000000..02f398301f
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/deployment.yaml
@@ -0,0 +1,84 @@
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+      - name: {{ include "common.name" . }}
+        image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        ports:
+        - containerPort: {{ .Values.service.internalPort }}
+        # disable liveness probe when breakpoints set in debugger
+        # so K8s doesn't restart unresponsive container
+        {{- if eq .Values.liveness.enabled true }}
+        livenessProbe:
+          tcpSocket:
+            port: {{ .Values.service.internalPort }}
+          initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.liveness.periodSeconds }}
+        {{ end -}}
+        readinessProbe:
+          tcpSocket:
+            port: {{ .Values.service.internalPort }}
+          initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.readiness.periodSeconds }}
+        volumeMounts:
+        - name: {{ include "common.fullname" . }}-logs
+          mountPath: /share/logs
+        - name: {{ include "common.fullname" . }}-logs
+          mountPath: /share/debug-logs
+        - name: {{ include "common.fullname" . }}-config
+          mountPath: /share/etc/config 
+        resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: logback.xml
+              path: logback.xml
+            - key: cadi.properties
+              path: cadi.properties
+            - key: topology.properties
+              path: topology.properties
+        - name:  {{ include "common.fullname" . }}-logs
+          emptyDir: {}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/service.yaml b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/service.yaml
new file mode 100644
index 0000000000..1624a08b27
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/templates/service.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/values.yaml b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/values.yaml
new file mode 100644
index 0000000000..0d50827dcb
--- /dev/null
+++ b/kubernetes/oof/charts/oof-cmso/charts/oof-cmso-topology/values.yaml
@@ -0,0 +1,100 @@
+# Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+  nodePortPrefix: 302
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+
+subChartsOnly:
+  enabled: true
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/optf-cmso-topology:latest
+pullPolicy: Always
+
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+
+service:
+  type: ClusterIP
+  name: oof-cmso-topology
+  portName: cmso-topology
+  internalPort: 7998
+  externalPort: 7998
+  #nodePort: 23
+  # as of 20181022 port 23 is reserved for cmso
+  # see https://wiki.onap.org/display/DW/OOM+NodePort+List
+
+
+config:
+
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 1.2Gi
+    requests:
+      cpu: 10m
+      memory: 800Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 1.2Gi
+    requests:
+      cpu: 10m
+      memory: 800Mi
+  unlimited: {}