[COMMON] Remove not supported components

Remove the following component charts:
- AAF
- CONSUL
- CONTRIB
- PORTAL
- LOG
- SNIRO-EMULATOR
correct the helm deploy plugin

Issue-ID: OOM-3074

Signed-off-by: Andreas Geissler <andreas-geissler@telekom.de>
Change-Id: I93cd32d9a9dabbc4cdeda63d8c7b669a79cdea8a

1 files changed, 0 insertions, 276 deletions

diff --git a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf
deleted file mode 100644
index b224bf3173..0000000000
--- a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf
+++ /dev/null
@@ -1,276 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-input {
- beats {
-
- ## Add a id to plugin configuration. Can be anything unique.
- id => 'beats_plugin'
-
- ######## Connection configurations ########
-
- ## The port to listen on.
- port => {{.Values.service.externalPort}}
-
- ## Close Idle clients after the specified time in seconds. Default is 60 seconds
- #client_inactivity_timeout => 60
-
- ######## Security configurations ########
-
- ## Enable encryption. Default false.
- #ssl => $filebeat_ssl
-
- ## ssl certificate path.
- #ssl_certificate => $filebeat_ssl_certificate
-
- ## SSL key to use.
- #ssl_key => $filebeat_ssl_key
-
- ##SSL key passphrase to use.
- #ssl_key_passphrase => $filebeat_ssl_key_passphrase
-
- ## Value can be any of: none, peer, force_peer.
- #ssl_verify_mode => $filebeat_ssl_verify_mode
-
- ## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms.
- #ssl_handshake_timeout => 10000
- include_codec_tag => false
- }
-}
-
-
-filter {
-  grok {
-    break_on_match => false
-    match => {
-      "source" => ["/var/log/onap/(?<componentName>[^/]+)/",
-                   "/var/log/onap/%{GREEDYDATA:componentLogFile}"
-                  ]
-    }
-  }
-
- # Filter for log4j xml events
- if "</log4j:event>" in [message] {
-
-   #mutate { add_field => { "orgmsg_log4j" => "%{message}" } }    # Copy of orginal msg for debug
-
-   #Filter to parse xml event and retrieve data
-   xml {
-     source => "message"
-     store_xml => false
-     remove_namespaces => true
-     target => "xml_content"
-     xpath => [ "/event/message/text()", "logmsg" ,
-                "/event/@logger", "Logger",
-                "/event/@timestamp", "Timestamp",
-                "/event/@level", "loglevel",
-                "/event/@thread", "Thread",
-                "/event/throwable/text()", "Exceptionthrowable",
-                "/event/NDC/text()", "NDCs",
-                "/event/properties/data/@name","mdcname",
-                "/event/properties/data/@value","mdcvalue"]
-
-    }
-
-   #Ruby filter to iterate and separate MDCs into documents
-   ruby {
-     code => '
-       $i = 0
-       $num = 0
-       if event.get("[mdcname]")
-         $num = event.get("[mdcname]").length
-       end
-       if $num != 0
-        until $i > $num do
-         if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i)
-            event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i))
-         end
-         $i=$i+1
-        end
-       end
-          '
-    }
-
-   #Validations
-   if [Exceptionthrowable]
-   {
-      mutate {
-        replace => {
-           "exceptionmessage" => "%{[Exceptionthrowable]}"
-        }
-      }
-    }
-
-   if [NDCs]
-   {
-      mutate {
-        replace => {
-          "NDC" => "%{[NDCs]}"
-        }
-      }
-   }
-
-   mutate {
-     replace => {
-        "Logger" =>"%{[Logger]}"
-        "logmsg" =>"%{[logmsg]}"
-        "Timestamp" =>"%{[Timestamp]}"
-        "loglevel" =>"%{[loglevel]}"
-        "message" => "%{logmsg}"
-        "Thread" => "%{[Thread]}"
-     }
-     remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"]
-   }
-
-   if [Timestamp]
-   {
-     date {
-        match => ["Timestamp", "UNIX_MS"]
-        target => "Timestamp"
-     }
-   }
- }
- # Filter for logback events
- else {
-
-  #mutate { add_field => { "orgmsg" => "%{message}" } }    # Copy of orginal msg for debug
-
-  mutate {
-    gsub => [
-      'message', ' = ', '=',
-      'message', '= ', '=null',
-      'message', '=\t', '=null\t', #This null is followed by a tab
-      'message', '\t$', '\t'
-    ]
-  }
-  # The grok below parses the message field for all current logback patterns used by oom components.
-  # Example logback pattern: %d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}|%X{RequestId}|%msg
-  # Example grok pattern:    %{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}
-  # Use the following command to find all logback patterns in oom directory: find oom -name "logback*xml" -exec grep "property.*attern.*value" {} \;|sort|uniq
-  grok {
-    match => {
-      "message" => [
-                    "%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}",
-                    "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:TargetVirtualEntity}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
-                    "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
-                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Timer}\|\[%{GREEDYDATA:caller}\]\|%{GREEDYDATA:message}",
-                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:ErrorCode}\|%{GREEDYDATA:ErrorDesc}\|%{GREEDYDATA:message}",
-                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ClassName}\|%{GREEDYDATA:message}",
-                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}",
-                    "\[%{TIMESTAMP_ISO8601:Timestamp}\|%{LOGLEVEL:loglevel}\|%{GREEDYDATA:Logger}\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}"
-      ]
-    }
-    overwrite => ["message"]
-  }
-  # The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values.
-  kv {
-    source => "MDCs"
-    field_split => ",\t"
-    trim_key => "\s"
-    trim_value => "\s"
-    remove_field => [ "MDCs" ]
-  }
-
-  if (![Timestamp] and [EndTimestamp]) {
-    mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } }
-  }
-  date {
-    match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ]
-    target => "Timestamp"
-  }
-
-  mutate {
-    remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"]
-  }
-
-  if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") {
-    #Parse kvps in message
-    kv {
-      field_split => "\s"
-      trim_key => "\s"
-      trim_value => "\s"
-    }
-
-    #If Request Id is missing and DID is present use as RequestId
-    if (![RequestId] and [DID] =~ /.+/) {
-      mutate { add_field => { "RequestId" => "%{DID}" } }
-    }
-  }
-
- } #Close else statement for logback events
-} #Close filter
-
-
-output {
- elasticsearch {
- id => 'onap_es'
-
- ######### Security configurations #########
-
- user => "elastic"
- password => "changeme"
-
- ## The .cer or .pem file to validate the server's certificate
- #cacert => $es_cacert
-
- ## The keystore used to present a certificate to the server. It can be either .jks or .p12
- #keystore => $es_keystore
- #keystore_password => $es_keystore_password
-
- ## Enable SSL/TLS secured communication to Elasticsearch cluster.
- ## Default is not set which in that case depends on the protocol specidfied in hosts list
- #ssl => $es_ssl
-
- ## Option to validate the server's certificate. Default is true
- #ssl_certificate_verification => $es_ssl_certificate_verification
-
- ## The JKS truststore to validate the server's certificate.
- #truststore => $es_truststore
- #truststore_password => $es_truststore_password
-
-
- ######### Elasticsearchcluster and host configurations #########
-
- ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
- hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"]
-
-
- ## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false.
- sniffing => true
-
- ## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds.
- #sniffing_delay => 5
-
- ## Set the address of a forward HTTP proxy.
- #proxy => $es_proxy
-
- ##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives
- #path => $es_path
-
- ######### Elasticsearch request configurations #########
-
- ## This setting defines the maximum sized bulk request Logstash will make.
- #flush_size => ?
-
- ######### Document configurations #########
-
- index => "logstash-%{+YYYY.MM.dd}"
- document_type => "logs"
-
- ## This can be used to associate child documents with a parent using the parent ID.
- #parent => "abcd'
- }
-}
-