[ESR] Uses new tpls for repos / images

This commit makes ESR chart to use the new generator for repositories and
images.
As new templates doesn't work well with "sub charts", we move also
subcharts to components folder.

Issue-ID: OOM-2364
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: Icd413c31a4f11116084d04fcf0c8984929f5f17d

2 files changed, 200 insertions, 0 deletions

diff --git a/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml b/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..a60fb95795
--- /dev/null
+++ b/kubernetes/esr/components/esr-server/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,56 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/esr/components/esr-server/resources/config/logback.xml b/kubernetes/esr/components/esr-server/resources/config/logback.xml
new file mode 100644
index 0000000000..fcc9f250d9
--- /dev/null
+++ b/kubernetes/esr/components/esr-server/resources/config/logback.xml
@@ -0,0 +1,144 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+
+<configuration scan="{{ .Values.log.scan.enabled }}" debug="{{ .Values.log.debug }}">
+
+  <property name="componentName" value='{{default "UNSET_COMPONENT" .Values.log.componentName}}'/>
+  <property name="subcomponentName" value='{{default "UNSET_SUBCOMPONENT" .Values.log.subcomponentName}}'/>
+
+  <property name="logDir" value="{{ .Values.log.logDir }}" />
+  <property name="queueSize" value="{{ .Values.log.queueSize }}"/>
+
+  <property name="p_tim" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}"/>
+  <property name="p_lvl" value="%level"/>
+  <property name="p_log" value="%logger"/>
+  <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+  <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+  <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+  <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+  <property name="p_thr" value="%thread"/>
+  <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+
+  <property name="errorLogName" value="error" />
+  <property name="metricsLogName" value="metrics" />
+  <property name="auditLogName" value="audit" />
+  <property name="debugLogName" value="debug" />
+
+  <property name="errorPattern" value="${p_tim}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+  <property name="debugPattern" value="${p_tim}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+  <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
+  <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
+
+  <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+
+  <!-- Console (human-readable) logging -->
+  <property name="consolePattern" value="%nopexception${p_log}\t${p_tim}\t${p_lvl}\t%message\t${p_mdc}\t%rootException\t${p_mak}\t${p_thr}%n"/>
+
+  <appender name="EELFAudit"
+            class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${auditLogName}.log</file>
+    <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+      <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
+    </rollingPolicy>
+    <encoder>
+      <pattern>${auditPattern}</pattern>
+    </encoder>
+  </appender>
+
+  <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>${queueSize}</queueSize>
+    <appender-ref ref="EELFAudit" />
+  </appender>
+
+  <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${metricsLogName}.log</file>
+    <rollingPolicy
+            class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+      <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
+    </rollingPolicy>
+    <encoder>
+      <pattern>${metricPattern}</pattern>
+    </encoder>
+  </appender>
+
+  <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>${queueSize}</queueSize>
+    <appender-ref ref="EELFMetrics"/>
+  </appender>
+
+  <appender name="EELFError"
+            class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${errorLogName}.log</file>
+    <rollingPolicy
+            class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+      <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
+    </rollingPolicy>
+    <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+      <level>INFO</level>
+    </filter>
+    <encoder>
+      <pattern>${errorPattern}</pattern>
+    </encoder>
+  </appender>
+
+  <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>${queueSize}</queueSize>
+    <appender-ref ref="EELFError"/>
+  </appender>
+
+  <appender name="EELFDebug"
+            class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${debugLogName}.log</file>
+    <rollingPolicy
+            class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+      <fileNamePattern>${logDirectory}/${debugLogName}.log.%d</fileNamePattern>
+    </rollingPolicy>
+    <encoder>
+      <pattern>${debugPattern}</pattern>
+    </encoder>
+  </appender>
+
+  <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>${queueSize}</queueSize>
+    <appender-ref ref="EELFDebug" />
+    <includeCallerData>true</includeCallerData>
+  </appender>
+
+  <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+    <encoder>
+      <pattern>${consolePattern}</pattern>
+    </encoder>
+  </appender>
+
+  <logger name="com.att.eelf.audit" level="info" additivity="false">
+    <appender-ref ref="asyncEELFAudit" />
+  </logger>
+
+  <logger name="com.att.eelf.metrics" level="info" additivity="false">
+    <appender-ref ref="asyncEELFMetrics" />
+  </logger>
+
+  <logger name="com.att.eelf.error" level="debug" additivity="false">
+    <appender-ref ref="asyncEELFError" />
+  </logger>
+
+  <root level="{{ .Values.log.root.level }}">
+    <appender-ref ref="asyncEELFDebug" />
+    <appender-ref ref="STDOUT" />
+  </root>
+
+</configuration>
\ No newline at end of file