Extract dmaap components into components dir

This will help enable edge deployment

Issue-ID: DMAAP-1068
Change-Id: I61df2887069a0302341c0004914158398ecd58d9
Signed-off-by: econwar <conor.ward@est.tech>

5 files changed, 258 insertions, 0 deletions

diff --git a/kubernetes/dmaap/components/message-router/templates/NOTES.txt b/kubernetes/dmaap/components/message-router/templates/NOTES.txt
new file mode 100644
index 0000000000..a44d0f76ee
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/dmaap/components/message-router/templates/configmap.yaml b/kubernetes/dmaap/components/message-router/templates/configmap.yaml
new file mode 100644
index 0000000000..1ed788893f
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/templates/configmap.yaml
@@ -0,0 +1,40 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-msgrtrapi-prop-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/dmaap/MsgRtrApi.properties").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-cadi-prop-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/dmaap/cadi.properties").AsConfig . | indent 2 }}
diff --git a/kubernetes/dmaap/components/message-router/templates/secrets.yaml b/kubernetes/dmaap/components/message-router/templates/secrets.yaml
new file mode 100644
index 0000000000..023b5a1614
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/templates/secrets.yaml
@@ -0,0 +1,28 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}-secret
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ (.Files.Glob "resources/config/dmaap/mykey").AsSecrets | indent 2 }}
+type: Opaque
diff --git a/kubernetes/dmaap/components/message-router/templates/service.yaml b/kubernetes/dmaap/components/message-router/templates/service.yaml
new file mode 100644
index 0000000000..dfd90b28f2
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/templates/service.yaml
@@ -0,0 +1,55 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" .  }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+    msb.onap.org/service-info: '[
+      {
+          "serviceName": "{{ include "common.servicename" . }}",
+          "version": "v1",
+          "url": "/",
+          "protocol": "REST",
+          "port": "{{.Values.service.internalPort}}",
+          "visualRange":"1"
+      }
+      ]'
+
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort }}
+    - port: {{ .Values.service.externalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/dmaap/components/message-router/templates/statefulset.yaml b/kubernetes/dmaap/components/message-router/templates/statefulset.yaml
new file mode 100644
index 0000000000..bdd134ac64
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/templates/statefulset.yaml
@@ -0,0 +1,101 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - {{ .Values.kafka.name }}
+        - --container-name
+        - {{ .Values.zookeeper.name }}
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.externalPort }}
+          - containerPort: {{ .Values.service.externalPort2 }}
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.externalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.externalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          - name: enableCadi
+            value: "false"
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /appl/dmaapMR1/bundleconfig/etc/appprops/MsgRtrApi.properties
+            subPath: MsgRtrApi.properties
+            name: appprops
+          - mountPath: /appl/dmaapMR1/etc/cadi.properties
+            subPath: cadi.properties
+            name: cadi
+          - mountPath: /appl/dmaapMR1/etc/keyfile
+            subPath: mykey
+            name: mykey
+          resources:
+{{ include "common.resources" . | indent 12 }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: appprops
+          configMap:
+            name: {{ include "common.fullname" . }}-msgrtrapi-prop-configmap
+        - name: cadi
+          configMap:
+            name: {{ include "common.fullname" . }}-cadi-prop-configmap
+        - name: mykey
+          secret:
+            secretName: {{ include "common.fullname" . }}-secret
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"