Extract dmaap components into components dir

This will help enable edge deployment

Issue-ID: DMAAP-1068
Change-Id: I61df2887069a0302341c0004914158398ecd58d9
Signed-off-by: econwar <conor.ward@est.tech>

5 files changed, 285 insertions, 0 deletions

diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/NOTES.txt b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/NOTES.txt
new file mode 100644
index 0000000000..a44d0f76ee
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/poddisruptionbudget.yaml b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/poddisruptionbudget.yaml
new file mode 100644
index 0000000000..0bc64e7682
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/poddisruptionbudget.yaml
@@ -0,0 +1,28 @@
+# Copyright © 2018  AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: policy/v1beta1
+kind: PodDisruptionBudget
+metadata:
+  name: {{ include "common.fullname" . }}-pdb
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  selector:
+    matchLabels:
+      app: {{ include "common.fullname" . }}
+  maxUnavailable: 1
diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/pv.yaml b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/pv.yaml
new file mode 100644
index 0000000000..44c9576abe
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/pv.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2018 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{- $root := . -}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+{{ range $i, $e := until (atoi (quote $root.Values.replicaCount) | default 3) }}
+---
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: {{ $root.Release.Name }}-{{ $root.Values.service.name }}-{{ $i }}
+  namespace: {{ $root.Release.Namespace }}
+  labels:
+    app: {{ $root.Values.service.name }}
+    chart: {{ $root.Chart.Name }}-{{ $root.Chart.Version | replace "+" "_" }}
+    release: {{ $root.Release.Name }}
+    heritage: {{ $root.Release.Service }}
+spec:
+  capacity:
+    storage: {{ $root.Values.persistence.size }}
+  accessModes:
+    - {{ $root.Values.persistence.accessMode }}
+  hostPath:
+    path: {{ $root.Values.persistence.mountPath }}/{{ $root.Release.Name }}/{{ $root.Values.persistence.mountSubPath }}-{{ $i }}
+  persistentVolumeReclaimPolicy: {{ $root.Values.persistence.volumeReclaimPolicy }}
+{{ end }}
+{{ end }}
+
diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/service.yaml b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/service.yaml
new file mode 100644
index 0000000000..da494b0ba5
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/service.yaml
@@ -0,0 +1,38 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+   - port: {{ .Values.service.clientPort }}
+     name: {{ .Values.service.clientPortName }}
+   - port: {{ .Values.service.serverPort }}
+     name: {{ .Values.service.serverPortName }}
+   - port: {{ .Values.service.leaderElectionPort }}
+     name: {{ .Values.service.leaderElectionPortName }}
+  clusterIP: None
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/statefulset.yaml b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/statefulset.yaml
new file mode 100644
index 0000000000..14f27949a7
--- /dev/null
+++ b/kubernetes/dmaap/components/message-router/charts/message-router-zookeeper/templates/statefulset.yaml
@@ -0,0 +1,146 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  serviceName: {{ .Values.service.name }}
+  replicas: {{ .Values.replicaCount }}
+  updateStrategy:
+    type: RollingUpdate
+    rollingUpdate:
+      maxUnavailable: {{ .Values.maxUnavailable }}
+  podManagementPolicy: Parallel
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      podAntiAffinity:
+         preferredDuringSchedulingIgnoredDuringExecution:
+         - weight: 1
+           podAffinityTerm:
+             labelSelector:
+                matchExpressions:
+                  - key: "app"
+                    operator: In
+                    values:
+                    - {{ include "common.name" . }}
+             topologyKey: "kubernetes.io/hostname"
+      initContainers:
+      - name: {{ include "common.name" . }}-seed-topics-apikeys
+        command:
+        - /bin/bash
+        - -c
+        - >
+          if [ -d /tmp/topics/version-2 ]; then
+          echo "nothing to do";
+          else
+          git clone -b {{ .Values.config.gerritBranch }} --single-branch {{ .Values.config.gerritProject }} /tmp/gerrit;
+          echo "Clone complete. Copying from /tmp/gerrit/oom-projects/data-zookeeper/* to /tmp/topics";
+          cp -var /tmp/gerrit/oom-topics/data-zookeeper/* /tmp/topics;
+          echo "Done.";
+          fi
+        image: "{{ .Values.global.ubuntuInitRepository }}/{{ .Values.ubuntuInitImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        volumeMounts:
+        - mountPath: /tmp/topics
+          name: zookeeper-data
+      containers:
+      - name: {{ include "common.name" . }}
+        image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+        imagePullPolicy:  {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        resources:
+{{ include "common.resources" . | indent 12 }}
+        ports:
+        - containerPort: {{ .Values.service.clientPort }}
+          name: {{ .Values.service.clientPortName }}
+        - containerPort: {{ .Values.service.serverPort }}
+          name: {{ .Values.service.serverPortName }}
+        - containerPort: {{ .Values.service.leaderElectionPort }}
+          name: {{ .Values.service.leaderElectionPortName }}
+        {{ if eq .Values.liveness.enabled true }}
+        livenessProbe:
+          exec:
+            command:
+            - sh
+            - -c
+            - "zookeeper-ready.sh 2181"
+          initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.liveness.periodSeconds }}
+        {{ end }}
+        readinessProbe:
+          exec:
+            command:
+            - sh
+            - -c
+            - "zookeeper-ready.sh 2181"
+          initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.readiness.periodSeconds }}
+        env:
+        - name: ZK_REPLICAS
+          value: "{{ .Values.replicaCount }}"
+        - name: ZK_INIT_LIMIT
+          value: "{{ .Values.zk.initLimit }}"
+        - name: ZK_SYNC_LIMIT
+          value: "{{ .Values.zk.syncLimit }}"
+        volumeMounts:
+        - mountPath: /etc/localtime
+          name: localtime
+          readOnly: true
+        - mountPath: /var/lib/zookeeper/data
+          name: zookeeper-data
+      volumes:
+      - name: localtime
+        hostPath:
+          path: /etc/localtime
+{{ if not .Values.persistence.enabled }}
+      - name: zookeeper-data
+        emptyDir: {}
+{{ else }}
+  volumeClaimTemplates:
+    - metadata:
+        name:  zookeeper-data
+        labels:
+          app:  {{ include "common.fullname" . }}
+          chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+          release: "{{ .Release.Name }}"
+          heritage: "{{ .Release.Service }}"
+      spec:
+        accessModes:
+          - {{ .Values.persistence.accessMode | quote }}
+        resources:
+          requests:
+            storage: {{ .Values.persistence.size | quote }}
+        selector:
+          matchLabels:
+            release: "{{ .Release.Name }}"
+            app: {{ .Values.service.name }}
+            chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+            heritage: "{{ .Release.Service }}"
+{{ end }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
+
+