Extract dmaap components into components dir

This will help enable edge deployment

Issue-ID: DMAAP-1068
Change-Id: I61df2887069a0302341c0004914158398ecd58d9
Signed-off-by: econwar <conor.ward@est.tech>

4 files changed, 268 insertions, 0 deletions

diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/NOTES.txt b/kubernetes/dmaap/components/dmaap-dr-node/templates/NOTES.txt
new file mode 100644
index 0000000000..65597e062f
--- /dev/null
+++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.config.dmaapDrNode.servicetype }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.config.dmaapDrNode.servicetype }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{.Values.config.dmaapDrNode.externalPort}}
+{{- else if contains "ClusterIP" .Values.config.dmaapDrNode.servicetype }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{.Values.config.dmaapDrNode.internalPort}}
+{{- end }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/configmap.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/configmap.yaml
new file mode 100644
index 0000000000..67392671f8
--- /dev/null
+++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/configmap.yaml
@@ -0,0 +1,47 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-node-props-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/node.properties").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-create-feed-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/feeds/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-log
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/deployment.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/deployment.yaml
new file mode 100644
index 0000000000..83a4975aa5
--- /dev/null
+++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/deployment.yaml
@@ -0,0 +1,139 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      hostname: {{.Values.config.dmaapDrNode.name}}
+      initContainers:
+        - name: {{ include "common.name" . }}-readiness
+          image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+          - /root/ready.py
+          args:
+          - --container-name
+          - dmaap-dr-prov
+          env:
+          - name: NAMESPACE
+            valueFrom:
+              fieldRef:
+                apiVersion: v1
+                fieldPath: metadata.namespace
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{.Values.config.dmaapDrNode.externalPort}}
+          - containerPort: {{.Values.config.dmaapDrNode.externalPort2}}
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{.Values.config.dmaapDrNode.internalPort}}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{.Values.config.dmaapDrNode.internalPort}}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: false
+          - mountPath: /opt/app/datartr/etc/dedicatedFeed.json
+            subPath: dedicatedFeed.json
+            name: create-feed
+          - mountPath: /opt/app/datartr/etc/createFeed.sh
+            subPath: createFeed.sh
+            name: create-feed
+          - mountPath: /opt/app/datartr/etc/node.properties
+            subPath: node.properties
+            name: node-props
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: {{ .Values.global.loggingDirectory }}
+          lifecycle:
+            postStart:
+              exec:
+                command:
+                - /opt/app/datartr/etc/createFeed.sh
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+
+        # Filebeat sidecar container
+        - name: {{ include "common.name" . }}-filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-filebeat-conf
+            mountPath: /usr/share/filebeat/filebeat.yml
+            subPath: filebeat.yml
+          - name: {{ include "common.fullname" . }}-data-filebeat
+            mountPath: /usr/share/filebeat/data
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap/datarouter-node
+      volumes:
+      - name: localtime
+        hostPath:
+          path: /etc/localtime
+      - name: create-feed
+        configMap:
+          name: {{ include "common.fullname" . }}-create-feed-configmap
+          defaultMode: 0755
+      - name: node-props
+        configMap:
+          name: {{ include "common.fullname" . }}-node-props-configmap
+      - name: dr-node-data
+      {{- if .Values.persistence.enabled }}
+        persistentVolumeClaim:
+          claimName: {{ include "common.fullname" . }}
+      {{- else }}
+        emptyDir: {}
+      {{- end }}
+      - name: {{ include "common.fullname" . }}-log-conf
+        configMap:
+          name: {{ include "common.fullname" . }}-log
+      - name: {{ include "common.fullname" . }}-filebeat-conf
+        configMap:
+          name: {{ .Release.Name }}-dmaap-filebeat-configmap
+      - name: {{ include "common.fullname" . }}-data-filebeat
+        emptyDir: {}
+      - name:  {{ include "common.fullname" . }}-logs
+        emptyDir: {}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dmaap/components/dmaap-dr-node/templates/service.yaml b/kubernetes/dmaap/components/dmaap-dr-node/templates/service.yaml
new file mode 100644
index 0000000000..b7207017da
--- /dev/null
+++ b/kubernetes/dmaap/components/dmaap-dr-node/templates/service.yaml
@@ -0,0 +1,49 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{.Values.config.dmaapDrNode.name}}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+      service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
+spec:
+  type: {{.Values.config.dmaapDrNode.servicetype}}
+  ports:
+    {{if eq .Values.config.dmaapDrNode.servicetype "NodePort" -}}
+    - port: {{.Values.config.dmaapDrNode.externalPort}}
+      targetPort: {{.Values.config.dmaapDrNode.internalPort}}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrNode.nodePort}}
+      name: {{.Values.config.dmaapDrNode.name}}
+    - port: {{.Values.config.dmaapDrNode.externalPort2}}
+      targetPort: {{.Values.config.dmaapDrNode.internalPort2}}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.config.dmaapDrNode.nodePort2}}
+      name: {{.Values.config.dmaapDrNode.name}}2
+    {{- else -}}
+    - port: {{.Values.config.dmaapDrNode.externalPort}}
+      targetPort: {{.Values.config.dmaapDrNode.internalPort}}
+      name: {{.Values.config.dmaapDrNode.name}}
+    - port: {{.Values.config.dmaapDrNode.externalPort2}}
+      targetPort: {{.Values.config.dmaapDrNode.internalPort2}}
+      name: {{.Values.config.dmaapDrNode.name}}2
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file