Extract dmaap components into components dir

This will help enable edge deployment

Issue-ID: DMAAP-1068
Change-Id: I61df2887069a0302341c0004914158398ecd58d9
Signed-off-by: econwar <conor.ward@est.tech>

5 files changed, 0 insertions, 258 deletions

diff --git a/kubernetes/dmaap/charts/message-router/templates/NOTES.txt b/kubernetes/dmaap/charts/message-router/templates/NOTES.txt
deleted file mode 100644
index a44d0f76ee..0000000000
--- a/kubernetes/dmaap/charts/message-router/templates/NOTES.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
-# Modifications Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/dmaap/charts/message-router/templates/configmap.yaml b/kubernetes/dmaap/charts/message-router/templates/configmap.yaml
deleted file mode 100644
index 1ed788893f..0000000000
--- a/kubernetes/dmaap/charts/message-router/templates/configmap.yaml
+++ /dev/null
@@ -1,40 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-msgrtrapi-prop-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ .Release.Name }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/dmaap/MsgRtrApi.properties").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}-cadi-prop-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ .Release.Name }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/dmaap/cadi.properties").AsConfig . | indent 2 }}
diff --git a/kubernetes/dmaap/charts/message-router/templates/secrets.yaml b/kubernetes/dmaap/charts/message-router/templates/secrets.yaml
deleted file mode 100644
index 023b5a1614..0000000000
--- a/kubernetes/dmaap/charts/message-router/templates/secrets.yaml
+++ /dev/null
@@ -1,28 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Secret
-metadata:
-  name: {{ include "common.fullname" . }}-secret
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ .Release.Name }}
-    heritage: {{ .Release.Service }}
-data:
-{{ (.Files.Glob "resources/config/dmaap/mykey").AsSecrets | indent 2 }}
-type: Opaque
diff --git a/kubernetes/dmaap/charts/message-router/templates/service.yaml b/kubernetes/dmaap/charts/message-router/templates/service.yaml
deleted file mode 100644
index dfd90b28f2..0000000000
--- a/kubernetes/dmaap/charts/message-router/templates/service.yaml
+++ /dev/null
@@ -1,55 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" .  }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ .Release.Name }}
-    heritage: {{ .Release.Service }}
-  annotations:
-    msb.onap.org/service-info: '[
-      {
-          "serviceName": "{{ include "common.servicename" . }}",
-          "version": "v1",
-          "url": "/",
-          "protocol": "REST",
-          "port": "{{.Values.service.internalPort}}",
-          "visualRange":"1"
-      }
-      ]'
-
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort }}
-    - port: {{ .Values.service.externalPort2 }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.service.portName }}-{{ .Values.service.externalPort2 }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ .Release.Name }}
diff --git a/kubernetes/dmaap/charts/message-router/templates/statefulset.yaml b/kubernetes/dmaap/charts/message-router/templates/statefulset.yaml
deleted file mode 100644
index bdd134ac64..0000000000
--- a/kubernetes/dmaap/charts/message-router/templates/statefulset.yaml
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-apiVersion: apps/v1beta1
-kind: StatefulSet
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ .Release.Name }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ .Release.Name }}
-    spec:
-      initContainers:
-      - command:
-        - /root/ready.py
-        args:
-        - --container-name
-        - {{ .Values.kafka.name }}
-        - --container-name
-        - {{ .Values.zookeeper.name }}
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: {{ include "common.name" . }}-readiness
-      containers:
-        - name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.externalPort }}
-          - containerPort: {{ .Values.service.externalPort2 }}
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.externalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end -}}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.externalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: enableCadi
-            value: "false"
-          volumeMounts:
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /appl/dmaapMR1/bundleconfig/etc/appprops/MsgRtrApi.properties
-            subPath: MsgRtrApi.properties
-            name: appprops
-          - mountPath: /appl/dmaapMR1/etc/cadi.properties
-            subPath: cadi.properties
-            name: cadi
-          - mountPath: /appl/dmaapMR1/etc/keyfile
-            subPath: mykey
-            name: mykey
-          resources:
-{{ include "common.resources" . | indent 12 }}
-      volumes:
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: appprops
-          configMap:
-            name: {{ include "common.fullname" . }}-msgrtrapi-prop-configmap
-        - name: cadi
-          configMap:
-            name: {{ include "common.fullname" . }}-cadi-prop-configmap
-        - name: mykey
-          secret:
-            secretName: {{ include "common.fullname" . }}-secret
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"