config seg aai elasticsearch

Change-Id: I1d734fee3e487ba7d2e346576e38aba84928928f
Issue-ID: OOM-660
Signed-off-by: mayankg2703 <mayank.gupta@amdocs.com>

1 files changed, 0 insertions, 400 deletions

diff --git a/kubernetes/config/docker/init/src/config/aai/elasticsearch/config/elasticsearch.yml b/kubernetes/config/docker/init/src/config/aai/elasticsearch/config/elasticsearch.yml
deleted file mode 100644
index 21e29df84b..0000000000
--- a/kubernetes/config/docker/init/src/config/aai/elasticsearch/config/elasticsearch.yml
+++ /dev/null
@@ -1,400 +0,0 @@
-##################### Elasticsearch Configuration Example #####################
-
-# This file contains an overview of various configuration settings,
-# targeted at operations staff. Application developers should
-# consult the guide at <http://elasticsearch.org/guide>.
-#
-# The installation procedure is covered at
-# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup.html>.
-#
-# Elasticsearch comes with reasonable defaults for most settings,
-# so you can try it out without bothering with configuration.
-#
-# Most of the time, these defaults are just fine for running a production
-# cluster. If you're fine-tuning your cluster, or wondering about the
-# effect of certain configuration option, please _do ask_ on the
-# mailing list or IRC channel [http://elasticsearch.org/community].
-
-# Any element in the configuration can be replaced with environment variables
-# by placing them in ${...} notation. For example:
-#
-# node.rack: ${RACK_ENV_VAR}
-
-# For information on supported formats and syntax for the config file, see
-# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup-configuration.html>
-################################### Cluster ###################################
-
-# Cluster name identifies your cluster for auto-discovery. If you're running
-# multiple clusters on the same network, make sure you're using unique names.
-#
-# cluster.name: elasticsearch
-
-cluster.name: ES_AAI
-
-#################################### Node #####################################
-
-node.name: ES_ONAP
-node.master: true
-node.data: true
-
-
-# Use the Cluster Health API [http://localhost:9200/_cluster/health], the
-# Node Info API [http://localhost:9200/_nodes] or GUI tools
-# such as <http://www.elasticsearch.org/overview/marvel/>,
-# <http://github.com/karmi/elasticsearch-paramedic>,
-# <http://github.com/lukas-vlcek/bigdesk> and
-# <http://mobz.github.com/elasticsearch-head> to inspect the cluster state.
-
-# By default, multiple nodes are allowed to start from the same installation location
-# to disable it, set the following:
-
-node.max_local_storage_nodes: 1
-
-
-#################################### Index ####################################
-# You can set a number of options (such as shard/replica options, mapping
-# or analyzer definitions, translog settings, ...) for indices globally,
-# in this file.
-#
-# Note, that it makes more sense to configure index settings specifically for
-# a certain index, either when creating it or by using the index templates API.
-#
-# See <http://elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules.html> and
-# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/indices-create-index.html>
-# for more information.
-
-# Set the number of shards (splits) of an index (5 by default):
-
-index.number_of_shards: 5
-
-# Set the number of replicas (additional copies) of an index (1 by default):
-
-index.number_of_replicas: 1
-
-# These settings directly affect the performance of index and search operations
-# in your cluster. Assuming you have enough machines to hold shards and
-# replicas, the rule of thumb is:
-#
-# 1. Having more *shards* enhances the _indexing_ performance and allows to
-#    _distribute_ a big index across machines.
-# 2. Having more *replicas* enhances the _search_ performance and improves the
-#    cluster _availability_.
-#
-# The "number_of_shards" is a one-time setting for an index.
-#
-# The "number_of_replicas" can be increased or decreased anytime,
-# by using the Index Update Settings API.
-#
-# Elasticsearch takes care about load balancing, relocating, gathering the
-# results from nodes, etc. Experiment with different settings to fine-tune
-# your setup.
-
-# Use the Index Status API (<http://localhost:9200/A/_status>) to inspect
-# the index status.
-
-
-#################################### Paths ####################################
-
-# Path to directory containing configuration (this file and logging.yml):
-#path.conf: /opt/app/elasticsearch/config
-
-# Path to directory where to store index data allocated for this node.
-# Use swm auto link to redirect the data directory if necessary.
-
-#path.data: /opt/app/elasticsearch/data
-
-# path.data: /path/to/data1,/path/to/data2
-
-# path.work: /path/to/work
-
-#path.logs: /opt/app/elasticsearch/logs
-
-#path.plugins: /opt/app/elasticsearch/plugins
-
-
-#################################### Plugin ###################################
-
-# If a plugin listed here is not installed for current node, the node will not start.
-#
-# plugin.mandatory: mapper-attachments,lang-groovy
-
-
-################################### Memory ####################################
-
-# Elasticsearch performs poorly when JVM starts swapping: you should ensure that
-# it _never_ swaps.
-#
-# Set this property to true to lock the memory: default is true
-
-bootstrap.mlockall: true
-
-# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set
-# to the same value, and that the machine has enough memory to allocate
-# for Elasticsearch, leaving enough memory for the operating system itself.
-#
-# You should also make sure that the Elasticsearch process is allowed to lock
-# the memory, eg. by using `ulimit -l unlimited`.
-
-
-############################## Network And HTTP ###############################
-# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens
-# on port [9200-9300] for HTTP traffic and on port [9300-9400] for node-to-node
-# communication. (the range means that if the port is busy, it will automatically
-# try the next port).
-
-# Set the bind address specifically (IPv4 or IPv6):
-network.bind_host: 0.0.0.0
-
-# Set the address other nodes will use to communicate with this node. If not
-# set, it is automatically derived. It must point to an actual IP address.
-
-# network.publish_host: 0.0.0.0
-
-# Set both 'bind_host' and 'publish_host':
-# network.host: 192.168.0.1
-
-
-# Set a custom port for the node to node communication (9300 by default):
-transport.tcp.port: 8443
-
-# Enable compression for all communication between nodes (disabled by default):
-transport.tcp.compress: false
-
-# Set a custom port to listen for HTTP traffic:
-# http.port: 9200
-http.port: 9200
-
-# Set a custom allowed content length:
-# http.max_content_length: 100mb
-http.max_content_length: 100mb
-
-# Disable HTTP completely:
-# http.enabled: false
-http.enabled: true
-
-# This is specifically useful for permitting which front end Kibana Url's are permitted to access elastic search.
-http.cors.enabled: false
-http.cors.allow-origin: "/.*/"
-http.cors.allow-headers: X-Requested-With, Content-Type, Content-Length
-http.cors.allow-credentials: false
-################################### Gateway ###################################
-
-# The gateway allows for persisting the cluster state between full cluster
-# restarts. Every change to the state (such as adding an index) will be stored
-# in the gateway, and when the cluster starts up for the first time,
-# it will read its state from the gateway.
-# There are several types of gateway implementations. For more information, see
-# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-gateway.html>.
-
-# The default gateway type is the "local" gateway (recommended):
-#
-#gateway.type: local
-#gateway.type: local
-
-# Settings below control how and when to start the initial recovery process on
-# a full cluster restart (to reuse as much local data as possible when using shared
-# gateway).
-
-# Allow recovery process after N nodes in a cluster are up:
-#
-# gateway.recover_after_nodes: 1
-gateway.recover_after_nodes: 1
-
-# Set the timeout to initiate the recovery process, once the N nodes
-# from previous setting are up (accepts time value):
-#
-#gateway.recover_after_time: 5m
-gateway.recover_after_time: 5m
-
-# Set how many nodes are expected in this cluster. Once these N nodes
-# are up (and recover_after_nodes is met), begin recovery process immediately
-# (without waiting for recover_after_time to expire):
-#
-# gateway.expected_nodes: 2
-gateway.expected_nodes: 2
-
-############################# Recovery Throttling #############################
-
-# These settings allow to control the process of shards allocation between
-# nodes during initial recovery, replica allocation, rebalancing,
-# or when adding and removing nodes.
-
-# Set the number of concurrent recoveries happening on a node:
-#
-# 1. During the initial recovery
-#
-# cluster.routing.allocation.node_initial_primaries_recoveries: 4
-#
-# 2. During adding/removing nodes, rebalancing, etc
-#
-# cluster.routing.allocation.node_concurrent_recoveries: 2
-
-# Set to throttle throughput when recovering (eg. 100mb, by default 20mb):
-# indices.recovery.max_bytes_per_sec: 20mb
-indices.recovery.max_bytes_per_sec: 20mb
-
-# Set to limit the number of open concurrent streams when
-# recovering a shard from a peer:
-#
-# indices.recovery.concurrent_streams: 5
-indices.recovery.concurrent_streams: 5
-
-################################## Discovery ##################################
-
-# Discovery infrastructure ensures nodes can be found within a cluster
-# and master node is elected. Multicast discovery is the default.
-
-# Set to ensure a node sees N other master eligible nodes to be considered
-# operational within the cluster. Its recommended to set it to a higher value
-# than 1 when running more than 2 nodes in the cluster.
-#
-discovery.zen.minimum_master_nodes: 1
-
-# Set the time to wait for ping responses from other nodes when discovering.
-# Set this option to a higher value on a slow or congested network
-# to minimize discovery failures:
-#
-# discovery.zen.ping.timeout: 3s
-discovery.zen.ping.timeout:
-
-# For more information, see
-# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html>
-
-# Unicast discovery allows to explicitly control which nodes will be used
-# to discover the cluster. It can be used when multicast is not present,
-# or to restrict the cluster communication-wise.
-#
-# 1. Disable multicast discovery (enabled by default):
-# discovery.zen.ping.multicast.enabled: false
-discovery.zen.ping.multicast.enabled: false
-
-
-# 2. Configure an initial list of master nodes in the cluster
-#    to perform discovery when new nodes (master or data) are started:
-#
-# discovery.zen.ping.unicast.hosts: ["host1", "host2:port"]
-discovery.zen.ping.unicast.hosts: ["0.0.0.0"]
-
-# EC2 discovery allows to use AWS EC2 API in order to perform discovery.
-#
-# You have to install the cloud-aws plugin for enabling the EC2 discovery.
-#
-# For more information, see
-# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-ec2.html>
-#
-#
-# See <http://elasticsearch.org/tutorials/elasticsearch-on-ec2/>
-# for a step-by-step tutorial.
-
-# GCE discovery allows to use Google Compute Engine API in order to perform discovery.
-#
-# You have to install the cloud-gce plugin for enabling the GCE discovery.
-#
-# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-gce>.
-
-# Azure discovery allows to use Azure API in order to perform discovery.
-#
-# You have to install the cloud-azure plugin for enabling the Azure discovery.
-#
-# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-azure>.
-
-################################## Slow Log ##################################
-
-# Shard level query and fetch threshold logging.
-
-#index.search.slowlog.threshold.query.warn: 10s
-#index.search.slowlog.threshold.query.info: 5s
-#index.search.slowlog.threshold.query.debug: 2s
-#index.search.slowlog.threshold.query.trace: 500ms
-
-#index.search.slowlog.threshold.fetch.warn: 1s
-#index.search.slowlog.threshold.fetch.info: 800ms
-#index.search.slowlog.threshold.fetch.debug: 500ms
-#index.search.slowlog.threshold.fetch.trace: 200ms
-
-#index.indexing.slowlog.threshold.index.warn: 10s
-#index.indexing.slowlog.threshold.index.info: 5s
-#index.indexing.slowlog.threshold.index.debug: 2s
-#index.indexing.slowlog.threshold.index.trace: 500ms
-
-################################## GC Logging ################################
-
-#monitor.jvm.gc.young.warn: 1000ms
-#monitor.jvm.gc.young.info: 700ms
-#monitor.jvm.gc.young.debug: 400ms
-
-#monitor.jvm.gc.old.warn: 10s
-#monitor.jvm.gc.old.info: 5s
-#monitor.jvm.gc.old.debug: 2s
-
-#############################################################################################
-###                                     SEARCH GUARD SSL                                      #
-###                                       Configuration                                       #
-###############################################################################################
-##  Uncomment all lines below prefixed with #X#  (globally remove #X#) for searchguard
-##
-###############################################################################################
-### Transport layer SSL                                                                       #
-###                                                                                           #
-###############################################################################################
-### Enable or disable node-to-node ssl encryption (default: true)
-#X#searchguard.ssl.transport.enable_openssl_if_available: true
-#X#searchguard.ssl.transport.enabled: true
-### JKS or PKCS12 (default: JKS)
-#X#searchguard.ssl.transport.keystore_type: JKS
-### Relative path to the keystore file (mandatory, this stores the server certificates), must be placed under the config/ dir
-#X#searchguard.ssl.transport.keystore_filepath: /some/path 
-### Alias name (default: first alias which could be found)
-###searchguard.ssl.transport.keystore_alias: localhost
-### Keystore password (default: changeit)
-#X#searchguard.ssl.transport.keystore_password: changeit
-##
-### JKS or PKCS12 (default: JKS)
-#X#searchguard.ssl.transport.truststore_type: JKS
-### Relative path to the truststore file (mandatory, this stores the client/root certificates), must be placed under the config/ dir
-#X#searchguard.ssl.transport.truststore_filepath: truststore.jks
-### Alias name (default: first alias which could be found)
-###searchguard.ssl.transport.truststore_alias: my_alias
-### Truststore password (default: changeit)
-#X#searchguard.ssl.transport.truststore_password: changeit
-### Enforce hostname verification (default: true)
-###searchguard.ssl.transport.enforce_hostname_verification: true
-### If hostname verification specify if hostname should be resolved (default: true)
-###searchguard.ssl.transport.resolve_hostname: true
-### Use native Open SSL instead of JDK SSL if available (default: true)
-###searchguard.ssl.transport.enable_openssl_if_available: false
-##
-###############################################################################################
-### HTTP/REST layer SSL                                                                       #
-###                                                                                           #
-###############################################################################################
-### Enable or disable rest layer security - https, (default: false)
-#X#searchguard.ssl.http.enable_openssl_if_available: true
-#X#searchguard.ssl.http.enabled: true
-### JKS or PKCS12 (default: JKS)
-#X#searchguard.ssl.http.keystore_type: JKS
-### Relative path to the keystore file (this stores the server certificates), must be placed under the config/ dir
-#X#searchguard.ssl.http.keystore_filepath: /keystore/path
-### Alias name (default: first alias which could be found)
-###searchguard.ssl.http.keystore_alias: my_alias
-### Keystore password (default: changeit)
-#X#searchguard.ssl.http.keystore_password: changeit
-### Do the clients (typically the browser or the proxy) have to authenticate themself to the http server, default is OPTIONAL
-### To enforce authentication use REQUIRE, to completely disable client certificates use NONE
-###searchguard.ssl.http.clientauth_mode: REQUIRE
-### JKS or PKCS12 (default: JKS)
-#X#searchguard.ssl.http.truststore_type: JKS
-### Relative path to the truststore file (this stores the client certificates), must be placed under the config/ dir
-#X#searchguard.ssl.http.truststore_filepath: truststore.jks
-### Alias name (default: first alias which could be found)
-###searchguard.ssl.http.truststore_alias: my_alias
-### Truststore password (default: changeit)
-#X#searchguard.ssl.http.truststore_password: changeit
-### Use native Open SSL instead of JDK SSL if available (default: true)
-###searchguard.ssl.http.enable_openssl_if_available: false
-
-#####################################################
-##### Security manager - Searchguard Configuration
-#####################################################
-#X#security.manager.enabled: false
-#X#searchguard.authcz.admin_dn: