summaryrefslogtreecommitdiffstats
path: root/kubernetes/common/postgres-legacy/charts
diff options
context:
space:
mode:
authorSylvain Desbureaux <sylvain.desbureaux@orange.com>2019-12-11 11:53:42 +0100
committerSylvain Desbureaux <sylvain.desbureaux@orange.com>2019-12-17 15:05:00 +0100
commit0b243b600f5c9c296189d66161a814396d648563 (patch)
tree59fc3d88a616ee582c51dd8a747c75e1e9ee6ffb /kubernetes/common/postgres-legacy/charts
parent8501d7cee5a887f9e19d5fe3671ef8180bce526b (diff)
[COMMON] Use deployment for postgresql
Instead of statefulset + inner work in the container, use deployments in order to be more reliable Change-Id: Icf4fe1303ae3489c822558e28bb08b69af2d4970 Issue-ID: OOM-2234 Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Diffstat (limited to 'kubernetes/common/postgres-legacy/charts')
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml18
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf677
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf67
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd2
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml18
-rwxr-xr-xkubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml26
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml68
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml26
-rw-r--r--kubernetes/common/postgres-legacy/charts/pgpool/values.yaml44
9 files changed, 946 insertions, 0 deletions
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml
new file mode 100644
index 0000000000..e2818139fa
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Postgres Server
+name: pgpool
+version: 5.0.0
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf
new file mode 100644
index 0000000000..f335174f40
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf
@@ -0,0 +1,677 @@
+# ----------------------------
+# pgPool-II configuration file a custom version
+# ----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# Whitespace may be used. Comments are introduced with "#" anywhere on a line.
+# The complete list of parameter names and allowed values can be found in the
+# pgPool-II documentation.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal. If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pgpool reload". Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS
+#------------------------------------------------------------------------------
+
+# - pgpool Connection Settings -
+
+listen_addresses = '*'
+ # Host name or IP address to listen on:
+ # '*' for all, '' for no TCP/IP connections
+ # (change requires restart)
+#port = 9999
+port = 5432
+ # Port number
+ # (change requires restart)
+socket_dir = '/tmp'
+ # Unix domain socket path
+ # The Debian package defaults to
+ # /var/run/postgresql
+ # (change requires restart)
+
+
+# - pgpool Communication Manager Connection Settings -
+
+pcp_port = 9898
+ # Port number for pcp
+ # (change requires restart)
+pcp_socket_dir = '/tmp'
+ # Unix domain socket path for pcp
+ # The Debian package defaults to
+ # /var/run/postgresql
+ # (change requires restart)
+
+# - Backend Connection Settings -
+
+backend_hostname0 = '{{.Values.container.name.primary}}'
+backend_port0 = 5432
+backend_weight0= 1
+backend_flag0= 'DISALLOW_TO_FAILOVER'
+
+backend_hostname1 = '{{.Values.container.name.replica}}'
+backend_port1 = 5432
+backend_weight1= 1
+backend_flag1= 'DISALLOW_TO_FAILOVER'
+
+#backend_hostname0 = 'master'
+ # Host name or IP address to connect to for backend 0
+#backend_port0 = 5432
+ # Port number for backend 0
+#backend_weight0 = 1
+ # Weight for backend 0 (only in load balancing mode)
+#backend_data_directory0 = '/data'
+ # Data directory for backend 0
+#backend_flag0 = 'ALLOW_TO_FAILOVER'
+ # Controls various backend behavior
+ # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER
+#backend_hostname1 = 'standby'
+#backend_port1 = 5432
+#backend_weight1 = 1
+#backend_data_directory1 = '/data1'
+#backend_flag1 = 'ALLOW_TO_FAILOVER'
+
+# - Authentication -
+
+enable_pool_hba = on
+ # Use pool_hba.conf for client authentication
+pool_passwd = 'pool_passwd'
+ # File name of pool_passwd for md5 authentication.
+ # "" disables pool_passwd.
+ # (change requires restart)
+authentication_timeout = 60
+ # Delay in seconds to complete client authentication
+ # 0 means no timeout.
+
+# - SSL Connections -
+
+ssl = off
+ # Enable SSL support
+ # (change requires restart)
+#ssl_key = './server.key'
+ # Path to the SSL private key file
+ # (change requires restart)
+#ssl_cert = './server.cert'
+ # Path to the SSL public certificate file
+ # (change requires restart)
+#ssl_ca_cert = ''
+ # Path to a single PEM format file
+ # containing CA root certificate(s)
+ # (change requires restart)
+#ssl_ca_cert_dir = ''
+ # Directory containing CA root certificate(s)
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# POOLS
+#------------------------------------------------------------------------------
+
+# - Pool size -
+
+num_init_children = 5
+ # Number of pools
+ # (change requires restart)
+max_pool = 1
+ # Number of connections per pool
+ # (change requires restart)
+
+# - Life time -
+
+child_life_time = 300
+ # Pool exits after being idle for this many seconds
+child_max_connections = 0
+ # Pool exits after receiving that many connections
+ # 0 means no exit
+connection_life_time = 0
+ # Connection to backend closes after being idle for this many seconds
+ # 0 means no close
+client_idle_limit = 0
+ # Client is disconnected after being idle for that many seconds
+ # (even inside an explicit transactions!)
+ # 0 means no disconnection
+
+
+#------------------------------------------------------------------------------
+# LOGS
+#------------------------------------------------------------------------------
+
+# - Where to log -
+
+log_destination = 'stderr'
+ # Where to log
+ # Valid values are combinations of stderr,
+ # and syslog. Default to stderr.
+
+# - What to log -
+
+print_timestamp = on
+ # Print timestamp on each line
+ # (change requires restart)
+
+log_connections = on
+ # Log connections
+log_hostname = on
+ # Hostname will be shown in ps status
+ # and in logs if connections are logged
+log_statement = on
+ # Log all statements
+log_per_node_statement = off
+ # Log all statements
+ # with node and backend informations
+log_standby_delay = 'if_over_threshold'
+ # Log standby delay
+ # Valid values are combinations of always,
+ # if_over_threshold, none
+
+# - Syslog specific -
+
+syslog_facility = 'LOCAL0'
+ # Syslog local facility. Default to LOCAL0
+syslog_ident = 'pgpool'
+ # Syslog program identification string
+ # Default to 'pgpool'
+
+# - Debug -
+
+debug_level = 1
+ # Debug message verbosity level
+ # 0 means no message, 1 or more mean verbose
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+pid_file_name = '/tmp/pgpool.pid'
+ # PID file name
+ # (change requires restart)
+logdir = '/tmp'
+ # Directory of pgPool status file
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTION POOLING
+#------------------------------------------------------------------------------
+
+connection_cache = off
+ # Activate connection pools
+ # (change requires restart)
+
+ # Semicolon separated list of queries
+ # to be issued at the end of a session
+ # The default is for 8.3 and later
+reset_query_list = 'ABORT; DISCARD ALL'
+ # The following one is for 8.2 and before
+#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
+
+
+#------------------------------------------------------------------------------
+# REPLICATION MODE
+#------------------------------------------------------------------------------
+
+replication_mode = off
+ # Activate replication mode
+ # (change requires restart)
+replicate_select = off
+ # Replicate SELECT statements
+ # when in replication or parallel mode
+ # replicate_select is higher priority than
+ # load_balance_mode.
+
+insert_lock = off
+ # Automatically locks a dummy row or a table
+ # with INSERT statements to keep SERIAL data
+ # consistency
+ # Without SERIAL, no lock will be issued
+lobj_lock_table = ''
+ # When rewriting lo_creat command in
+ # replication mode, specify table name to
+ # lock
+
+# - Degenerate handling -
+
+replication_stop_on_mismatch = off
+ # On disagreement with the packet kind
+ # sent from backend, degenerate the node
+ # which is most likely "minority"
+ # If off, just force to exit this session
+
+failover_if_affected_tuples_mismatch = off
+ # On disagreement with the number of affected
+ # tuples in UPDATE/DELETE queries, then
+ # degenerate the node which is most likely
+ # "minority".
+ # If off, just abort the transaction to
+ # keep the consistency
+
+
+#------------------------------------------------------------------------------
+# LOAD BALANCING MODE
+#------------------------------------------------------------------------------
+
+load_balance_mode = on
+ # Activate load balancing mode
+ # (change requires restart)
+ignore_leading_white_space = on
+ # Ignore leading white spaces of each query
+white_function_list = ''
+ # Comma separated list of function names
+ # that don't write to database
+ # Regexp are accepted
+black_function_list = 'currval,lastval,nextval,setval'
+ # Comma separated list of function names
+ # that write to database
+ # Regexp are accepted
+
+
+#------------------------------------------------------------------------------
+# MASTER/SLAVE MODE
+#------------------------------------------------------------------------------
+
+master_slave_mode = on
+ # Activate master/slave mode
+ # (change requires restart)
+master_slave_sub_mode = 'stream'
+ # Master/slave sub mode
+ # Valid values are combinations slony or
+ # stream. Default is slony.
+ # (change requires restart)
+
+# - Streaming -
+
+sr_check_period = 10
+ # Streaming replication check period
+ # Disabled (0) by default
+sr_check_user = '{{.Values.credentials.pgusername}}'
+ # Streaming replication check user
+ # This is neccessary even if you disable streaming
+ # replication delay check by sr_check_period = 0
+sr_check_password = '{{.Values.credentials.pgpassword}}'
+ # Password for streaming replication check user
+delay_threshold = 10000000
+ # Threshold before not dispatching query to standby node
+ # Unit is in bytes
+ # Disabled (0) by default
+
+# - Special commands -
+
+follow_master_command = ''
+ # Executes this command after master failover
+ # Special values:
+ # %d = node id
+ # %h = host name
+ # %p = port number
+ # %D = database cluster path
+ # %m = new master node id
+ # %H = hostname of the new master node
+ # %M = old master node id
+ # %P = old primary node id
+ # %r = new master port number
+ # %R = new master database cluster path
+ # %% = '%' character
+
+
+#------------------------------------------------------------------------------
+# PARALLEL MODE
+#------------------------------------------------------------------------------
+
+parallel_mode = off
+ # Activates parallel query mode
+ # (change requires restart)
+pgpool2_hostname = ''
+ # Set pgpool2 hostname
+ # (change requires restart)
+
+# - System DB info -
+
+#system_db_hostname = 'localhost'
+ # (change requires restart)
+#system_db_port = 5432
+ # (change requires restart)
+#system_db_dbname = 'pgpool'
+ # (change requires restart)
+#system_db_schema = 'pgpool_catalog'
+ # (change requires restart)
+#system_db_user = 'pgpool'
+ # (change requires restart)
+#system_db_password = ''
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# HEALTH CHECK
+#------------------------------------------------------------------------------
+
+health_check_period = 20
+ # Health check period
+ # Disabled (0) by default
+health_check_timeout = 10
+ # Health check timeout
+ # 0 means no timeout
+health_check_user = '{{.Values.credentials.pgusername}}'
+ # Health check user
+health_check_password = '{{.Values.credentials.pgpassword}}'
+ # Password for health check user
+health_check_max_retries = 3
+connect_timeout = 10000 # Timeout value in milliseconds before giving up to connect to backend.
+
+ # Maximum number of times to retry a failed health check before giving up.
+health_check_retry_delay = 1
+ # Amount of time to wait (in seconds) between retries.
+
+
+#------------------------------------------------------------------------------
+# FAILOVER AND FAILBACK
+#------------------------------------------------------------------------------
+
+failover_command = ''
+ # Executes this command at failover
+ # Special values:
+ # %d = node id
+ # %h = host name
+ # %p = port number
+ # %D = database cluster path
+ # %m = new master node id
+ # %H = hostname of the new master node
+ # %M = old master node id
+ # %P = old primary node id
+ # %r = new master port number
+ # %R = new master database cluster path
+ # %% = '%' character
+failback_command = ''
+ # Executes this command at failback.
+ # Special values:
+ # %d = node id
+ # %h = host name
+ # %p = port number
+ # %D = database cluster path
+ # %m = new master node id
+ # %H = hostname of the new master node
+ # %M = old master node id
+ # %P = old primary node id
+ # %r = new master port number
+ # %R = new master database cluster path
+ # %% = '%' character
+
+fail_over_on_backend_error = off
+ # Initiates failover when reading/writing to the
+ # backend communication socket fails
+ # If set to off, pgpool will report an
+ # error and disconnect the session.
+
+search_primary_node_timeout = 10
+ # Timeout in seconds to search for the
+ # primary node when a failover occurs.
+ # 0 means no timeout, keep searching
+ # for a primary node forever.
+
+#------------------------------------------------------------------------------
+# ONLINE RECOVERY
+#------------------------------------------------------------------------------
+
+recovery_user = '{{.Values.credentials.pgusername}}'
+ # Online recovery user
+recovery_password = '{{.Values.credentials.pgpassword}}'
+ # Online recovery password
+recovery_1st_stage_command = ''
+ # Executes a command in first stage
+recovery_2nd_stage_command = ''
+ # Executes a command in second stage
+recovery_timeout = 90
+ # Timeout in seconds to wait for the
+ # recovering node's postmaster to start up
+ # 0 means no wait
+client_idle_limit_in_recovery = 0
+ # Client is disconnected after being idle
+ # for that many seconds in the second stage
+ # of online recovery
+ # 0 means no disconnection
+ # -1 means immediate disconnection
+
+
+#------------------------------------------------------------------------------
+# WATCHDOG
+#------------------------------------------------------------------------------
+
+# - Enabling -
+
+use_watchdog = off
+ # Activates watchdog
+ # (change requires restart)
+
+# -Connection to up stream servers -
+
+trusted_servers = ''
+ # trusted server list which are used
+ # to confirm network connection
+ # (hostA,hostB,hostC,...)
+ # (change requires restart)
+ping_path = '/bin'
+ # ping command path
+ # (change requires restart)
+
+# - Watchdog communication Settings -
+
+wd_hostname = ''
+ # Host name or IP address of this watchdog
+ # (change requires restart)
+wd_port = 9000
+ # port number for watchdog service
+ # (change requires restart)
+wd_authkey = ''
+ # Authentication key for watchdog communication
+ # (change requires restart)
+
+# - Virtual IP control Setting -
+
+delegate_IP = ''
+ # delegate IP address
+ # If this is empty, virtual IP never bring up.
+ # (change requires restart)
+ifconfig_path = '/sbin'
+ # ifconfig command path
+ # (change requires restart)
+if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0'
+ # startup delegate IP command
+ # (change requires restart)
+if_down_cmd = 'ifconfig eth0:0 down'
+ # shutdown delegate IP command
+ # (change requires restart)
+
+arping_path = '/usr/sbin' # arping command path
+ # (change requires restart)
+
+arping_cmd = 'arping -U $_IP_$ -w 1'
+ # arping command
+ # (change requires restart)
+
+# - Behaivor on escalation Setting -
+
+clear_memqcache_on_escalation = on
+ # Clear all the query cache on shared memory
+ # when standby pgpool escalate to active pgpool
+ # (= virtual IP holder).
+ # This should be off if client connects to pgpool
+ # not using virtual IP.
+ # (change requires restart)
+wd_escalation_command = ''
+ # Executes this command at escalation on new active pgpool.
+ # (change requires restart)
+
+# - Lifecheck Setting -
+
+# -- common --
+
+wd_lifecheck_method = 'heartbeat'
+ # Method of watchdog lifecheck ('heartbeat' or 'query')
+ # (change requires restart)
+wd_interval = 10
+ # lifecheck interval (sec) > 0
+ # (change requires restart)
+
+# -- heartbeat mode --
+
+wd_heartbeat_port = 9694
+ # Port number for receiving heartbeat signal
+ # (change requires restart)
+wd_heartbeat_keepalive = 2
+ # Interval time of sending heartbeat signal (sec)
+ # (change requires restart)
+wd_heartbeat_deadtime = 30
+ # Deadtime interval for heartbeat signal (sec)
+ # (change requires restart)
+heartbeat_destination0 = 'host0_ip1'
+ # Host name or IP address of destination 0
+ # for sending heartbeat signal.
+ # (change requires restart)
+heartbeat_destination_port0 = 9694
+ # Port number of destination 0 for sending
+ # heartbeat signal. Usually this is the
+ # same as wd_heartbeat_port.
+ # (change requires restart)
+heartbeat_device0 = ''
+ # Name of NIC device (such like 'eth0')
+ # used for sending/receiving heartbeat
+ # signal to/from destination 0.
+ # This works only when this is not empty
+ # and pgpool has root privilege.
+ # (change requires restart)
+
+#heartbeat_destination1 = 'host0_ip2'
+#heartbeat_destination_port1 = 9694
+#heartbeat_device1 = ''
+
+# -- query mode --
+
+wd_life_point = 3
+ # lifecheck retry times
+ # (change requires restart)
+wd_lifecheck_query = 'SELECT 1'
+ # lifecheck query to pgpool from watchdog
+ # (change requires restart)
+wd_lifecheck_dbname = 'template1'
+ # Database name connected for lifecheck
+ # (change requires restart)
+wd_lifecheck_user = 'nobody'
+ # watchdog user monitoring pgpools in lifecheck
+ # (change requires restart)
+wd_lifecheck_password = ''
+ # Password for watchdog user in lifecheck
+ # (change requires restart)
+
+# - Other pgpool Connection Settings -
+
+#other_pgpool_hostname0 = 'host0'
+ # Host name or IP address to connect to for other pgpool 0
+ # (change requires restart)
+#other_pgpool_port0 = 5432
+ # Port number for othet pgpool 0
+ # (change requires restart)
+#other_wd_port0 = 9000
+ # Port number for othet watchdog 0
+ # (change requires restart)
+#other_pgpool_hostname1 = 'host1'
+#other_pgpool_port1 = 5432
+#other_wd_port1 = 9000
+
+
+#------------------------------------------------------------------------------
+# OTHERS
+#------------------------------------------------------------------------------
+relcache_expire = 0
+ # Life time of relation cache in seconds.
+ # 0 means no cache expiration(the default).
+ # The relation cache is used for cache the
+ # query result against PostgreSQL system
+ # catalog to obtain various information
+ # including table structures or if it's a
+ # temporary table or not. The cache is
+ # maintained in a pgpool child local memory
+ # and being kept as long as it survives.
+ # If someone modify the table by using
+ # ALTER TABLE or some such, the relcache is
+ # not consistent anymore.
+ # For this purpose, cache_expiration
+ # controls the life time of the cache.
+relcache_size = 256
+ # Number of relation cache
+ # entry. If you see frequently:
+ # "pool_search_relcache: cache replacement happend"
+ # in the pgpool log, you might want to increate this number.
+
+check_temp_table = on
+ # If on, enable temporary table check in SELECT statements.
+ # This initiates queries against system catalog of primary/master
+ # thus increases load of master.
+ # If you are absolutely sure that your system never uses temporary tables
+ # and you want to save access to primary/master, you could turn this off.
+ # Default is on.
+
+
+#------------------------------------------------------------------------------
+# ON MEMORY QUERY MEMORY CACHE
+#------------------------------------------------------------------------------
+memory_cache_enabled = off
+ # If on, use the memory cache functionality, off by default
+memqcache_method = 'shmem'
+ # Cache storage method. either 'shmem'(shared memory) or
+ # 'memcached'. 'shmem' by default
+ # (change requires restart)
+memqcache_memcached_host = 'localhost'
+ # Memcached host name or IP address. Mandatory if
+ # memqcache_method = 'memcached'.
+ # Defaults to localhost.
+ # (change requires restart)
+memqcache_memcached_port = 11211
+ # Memcached port number. Mondatory if memqcache_method = 'memcached'.
+ # Defaults to 11211.
+ # (change requires restart)
+memqcache_total_size = 67108864
+ # Total memory size in bytes for storing memory cache.
+ # Mandatory if memqcache_method = 'shmem'.
+ # Defaults to 64MB.
+ # (change requires restart)
+memqcache_max_num_cache = 1000000
+ # Total number of cache entries. Mandatory
+ # if memqcache_method = 'shmem'.
+ # Each cache entry consumes 48 bytes on shared memory.
+ # Defaults to 1,000,000(45.8MB).
+ # (change requires restart)
+memqcache_expire = 0
+ # Memory cache entry life time specified in seconds.
+ # 0 means infinite life time. 0 by default.
+ # (change requires restart)
+memqcache_auto_cache_invalidation = on
+ # If on, invalidation of query cache is triggered by corresponding
+ # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered
+ # by memqcache_expire. on by default.
+ # (change requires restart)
+memqcache_maxcache = 409600
+ # Maximum SELECT result size in bytes.
+ # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.
+ # (change requires restart)
+memqcache_cache_block_size = 1048576
+ # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.
+ # Defaults to 1MB.
+ # (change requires restart)
+memqcache_oiddir = '/var/log/pgpool/oiddir'
+ # Temporary work directory to record table oids
+ # (change requires restart)
+white_memqcache_table_list = ''
+ # Comma separated list of table names to memcache
+ # that don't write to database
+ # Regexp are accepted
+black_memqcache_table_list = ''
+ # Comma separated list of table names not to memcache
+ # that don't write to database
+ # Regexp are accepted
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf
new file mode 100644
index 0000000000..d8918409e8
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf
@@ -0,0 +1,67 @@
+# pgpool Client Authentication Configuration File a custom version
+# ===============================================
+#
+# The format rule in this file follows the rules in the PostgreSQL
+# Administrator's Guide. Refer to chapter "Client Authentication" for a
+# complete description. A short synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which user names they can use, which databases they
+# can access. Records take one of these forms:
+#
+# local DATABASE USER METHOD [OPTION]
+# host DATABASE USER CIDR-ADDRESS METHOD [OPTION]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain
+# socket, "host" is either a plain or SSL-encrypted TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", a database name, or a comma-separated
+# list thereof. Note that "samegroup" like in PostgreSQL's pg_hba.conf
+# file is not supported, since pgpool does not know which group a user
+# belongs to. Also note that the database specified here may not exist in
+# the backend PostgreSQL. pgpool will authenticate based on the database's
+# name, not based on whether it exists or not.
+#
+# USER can be "all", a user name, or a comma-separated list thereof. In
+# both the DATABASE and USER fields you can also write a file name prefixed
+# with "@" to include names from a separate file. Note that a group name
+# prefixed with "+" like in PostgreSQL's pg_hba.conf file is not supported
+# because of the same reason as "samegroup" token. Also note that a user
+# name specified here may not exist in the backend PostgreSQL. pgpool will
+# authenticate based on the user's name, not based on whether he/she exists.
+#
+# CIDR-ADDRESS specifies the set of hosts the record matches.
+# It is made up of an IP address and a CIDR mask that is an integer
+# (between 0 and 32 (IPv4) that specifies the number of significant bits in
+# the mask. Alternatively, you can write an IP address and netmask in
+# separate columns to specify the set of hosts.
+#
+# METHOD can be "trust", "reject", "md5" or "pam". Note that "pam" sends passwords
+# in clear text.
+#
+# OPTION is the name of the PAM service. Default service name is "pgpool"
+#
+# Database and user names containing spaces, commas, quotes and other special
+# characters must be quoted. Quoting one of the keywords "all" or "sameuser"
+# makes the name lose its special character, and just match a database or
+# username with that name.
+#
+# This file is read on pgpool startup. If you edit the file on a running
+# system, you have to restart the pgpool for the changes to take effect.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records. In that case you will also need to make pgpool listen
+# on a non-local interface via the listen_addresses configuration parameter.
+#
+
+# TYPE DATABASE USER CIDR-ADDRESS METHOD
+
+# "local" is for Unix domain socket connections only
+#local all all trust
+# IPv4 local connections:
+host all all 0.0.0.0/0 md5
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd
new file mode 100644
index 0000000000..3636d1de74
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd
@@ -0,0 +1,2 @@
+testuser:md599e8713364988502fa6189781bcf648f
+postgres:md53175bce1d3201d16594cebf9d7eb3f9d
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml
new file mode 100644
index 0000000000..5b097f3ab7
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~5.x-0
+ repository: '@local'
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml
new file mode 100755
index 0000000000..e2c77ff910
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/templates/configmap.yaml
@@ -0,0 +1,26 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-pgpool-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "configs/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml
new file mode 100644
index 0000000000..15fa18d81d
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/templates/deployment.yaml
@@ -0,0 +1,68 @@
+{{/*
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+kind: Deployment
+apiVersion: extensions/v1beta1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: 2
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - image: "{{.Values.repository}}/{{.Values.image}}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}
+ env:
+ - name: PG_PRIMARY_SERVICE_NAME
+ value: {{.Values.container.name.primary}}
+ - name: PG_REPLICA_SERVICE_NAME
+ value: {{.Values.container.name.replica}}
+ - name: PG_USERNAME
+ value: {{.Values.credentials.pgusername}}
+ - name: PG_PASSWORD
+ value: {{.Values.credentials.pgpassword}}
+ ports:
+ - containerPort: 5432
+ name: pgpool
+ protocol: TCP
+ readinessProbe:
+ tcpSocket:
+ port: 5432
+ initialDelaySeconds: 20
+ periodSeconds: 10
+ livenessProbe:
+ tcpSocket:
+ port: 5432
+ initialDelaySeconds: 15
+ periodSeconds: 20
+ volumeMounts:
+ - name: pgpool-pgconf
+ mountPath: /pgconf/pgpoolconfigdir
+ readOnly: false
+ volumes:
+ - name: pgpool-pgconf
+ configMap:
+ name: {{ include "common.fullname" . }}-pgpool-configmap
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml
new file mode 100644
index 0000000000..86442a2740
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/templates/service.yaml
@@ -0,0 +1,26 @@
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/values.yaml b/kubernetes/common/postgres-legacy/charts/pgpool/values.yaml
new file mode 100644
index 0000000000..cb732b7cd7
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/values.yaml
@@ -0,0 +1,44 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ persistence: {}
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: crunchydata
+image: crunchy-pgpool:centos7-10.4-2.0.0
+pullPolicy: Always
+
+container:
+ port: 5432
+ name:
+ primary: pgset-primary
+ replica: pgset-replica
+credentials:
+ pgusername: testuser
+ pgpassword: password
+service:
+ name: pgpool
+ type: ClusterIP
+ externalPort: 5432
+ internalPort: 5432