[COMMON] Use deployment for postgresql

Instead of statefulset + inner work in the container, use deployments in
order to be more reliable

Change-Id: Icf4fe1303ae3489c822558e28bb08b69af2d4970
Issue-ID: OOM-2234
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>

3 files changed, 746 insertions, 0 deletions

diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf
new file mode 100644
index 0000000000..f335174f40
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pgpool.conf
@@ -0,0 +1,677 @@
+# ----------------------------
+# pgPool-II configuration file a custom version
+# ----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# Whitespace may be used.  Comments are introduced with "#" anywhere on a line.
+# The complete list of parameter names and allowed values can be found in the
+# pgPool-II documentation.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pgpool reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS
+#------------------------------------------------------------------------------
+
+# - pgpool Connection Settings -
+
+listen_addresses = '*'
+                                   # Host name or IP address to listen on:
+                                   # '*' for all, '' for no TCP/IP connections
+                                   # (change requires restart)
+#port = 9999
+port = 5432
+                                   # Port number
+                                   # (change requires restart)
+socket_dir = '/tmp'
+                                   # Unix domain socket path
+                                   # The Debian package defaults to
+                                   # /var/run/postgresql
+                                   # (change requires restart)
+
+
+# - pgpool Communication Manager Connection Settings -
+
+pcp_port = 9898
+                                   # Port number for pcp
+                                   # (change requires restart)
+pcp_socket_dir = '/tmp'
+                                   # Unix domain socket path for pcp
+                                   # The Debian package defaults to
+                                   # /var/run/postgresql
+                                   # (change requires restart)
+
+# - Backend Connection Settings -
+
+backend_hostname0 = '{{.Values.container.name.primary}}'
+backend_port0 = 5432
+backend_weight0= 1
+backend_flag0= 'DISALLOW_TO_FAILOVER'
+
+backend_hostname1 = '{{.Values.container.name.replica}}'
+backend_port1 = 5432
+backend_weight1= 1
+backend_flag1= 'DISALLOW_TO_FAILOVER'
+
+#backend_hostname0 = 'master'
+                                   # Host name or IP address to connect to for backend 0
+#backend_port0 = 5432
+                                   # Port number for backend 0
+#backend_weight0 = 1
+                                   # Weight for backend 0 (only in load balancing mode)
+#backend_data_directory0 = '/data'
+                                   # Data directory for backend 0
+#backend_flag0 = 'ALLOW_TO_FAILOVER'
+                                   # Controls various backend behavior
+                                   # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER
+#backend_hostname1 = 'standby'
+#backend_port1 = 5432
+#backend_weight1 = 1
+#backend_data_directory1 = '/data1'
+#backend_flag1 = 'ALLOW_TO_FAILOVER'
+
+# - Authentication -
+
+enable_pool_hba = on
+                                   # Use pool_hba.conf for client authentication
+pool_passwd = 'pool_passwd'
+                                   # File name of pool_passwd for md5 authentication.
+                                   # "" disables pool_passwd.
+                                   # (change requires restart)
+authentication_timeout = 60
+                                   # Delay in seconds to complete client authentication
+                                   # 0 means no timeout.
+
+# - SSL Connections -
+
+ssl = off
+                                   # Enable SSL support
+                                   # (change requires restart)
+#ssl_key = './server.key'
+                                   # Path to the SSL private key file
+                                   # (change requires restart)
+#ssl_cert = './server.cert'
+                                   # Path to the SSL public certificate file
+                                   # (change requires restart)
+#ssl_ca_cert = ''
+                                   # Path to a single PEM format file
+                                   # containing CA root certificate(s)
+                                   # (change requires restart)
+#ssl_ca_cert_dir = ''
+                                   # Directory containing CA root certificate(s)
+                                   # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# POOLS
+#------------------------------------------------------------------------------
+
+# - Pool size -
+
+num_init_children = 5
+                                   # Number of pools
+                                   # (change requires restart)
+max_pool = 1
+                                   # Number of connections per pool
+                                   # (change requires restart)
+
+# - Life time -
+
+child_life_time = 300
+                                   # Pool exits after being idle for this many seconds
+child_max_connections = 0
+                                   # Pool exits after receiving that many connections
+                                   # 0 means no exit
+connection_life_time = 0
+                                   # Connection to backend closes after being idle for this many seconds
+                                   # 0 means no close
+client_idle_limit = 0
+                                   # Client is disconnected after being idle for that many seconds
+                                   # (even inside an explicit transactions!)
+                                   # 0 means no disconnection
+
+
+#------------------------------------------------------------------------------
+# LOGS
+#------------------------------------------------------------------------------
+
+# - Where to log -
+
+log_destination = 'stderr'
+                                   # Where to log
+                                   # Valid values are combinations of stderr,
+                                   # and syslog. Default to stderr.
+
+# - What to log -
+
+print_timestamp = on
+                                   # Print timestamp on each line
+                                   # (change requires restart)
+
+log_connections = on
+                                   # Log connections
+log_hostname = on
+                                   # Hostname will be shown in ps status
+                                   # and in logs if connections are logged
+log_statement = on
+                                   # Log all statements
+log_per_node_statement = off
+                                   # Log all statements
+                                   # with node and backend informations
+log_standby_delay = 'if_over_threshold'
+                                   # Log standby delay
+                                   # Valid values are combinations of always,
+                                   # if_over_threshold, none
+
+# - Syslog specific -
+
+syslog_facility = 'LOCAL0'
+                                   # Syslog local facility. Default to LOCAL0
+syslog_ident = 'pgpool'
+                                   # Syslog program identification string
+                                   # Default to 'pgpool'
+
+# - Debug -
+
+debug_level = 1
+                                   # Debug message verbosity level
+                                   # 0 means no message, 1 or more mean verbose
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+pid_file_name = '/tmp/pgpool.pid'
+                                   # PID file name
+                                   # (change requires restart)
+logdir = '/tmp'
+                                   # Directory of pgPool status file
+                                   # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTION POOLING
+#------------------------------------------------------------------------------
+
+connection_cache = off
+                                   # Activate connection pools
+                                   # (change requires restart)
+
+                                   # Semicolon separated list of queries
+                                   # to be issued at the end of a session
+                                   # The default is for 8.3 and later
+reset_query_list = 'ABORT; DISCARD ALL'
+                                   # The following one is for 8.2 and before
+#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
+
+
+#------------------------------------------------------------------------------
+# REPLICATION MODE
+#------------------------------------------------------------------------------
+
+replication_mode = off
+                                   # Activate replication mode
+                                   # (change requires restart)
+replicate_select = off
+                                   # Replicate SELECT statements
+                                   # when in replication or parallel mode
+                                   # replicate_select is higher priority than
+                                   # load_balance_mode.
+
+insert_lock = off
+                                   # Automatically locks a dummy row or a table
+                                   # with INSERT statements to keep SERIAL data
+                                   # consistency
+                                   # Without SERIAL, no lock will be issued
+lobj_lock_table = ''
+                                   # When rewriting lo_creat command in
+                                   # replication mode, specify table name to
+                                   # lock
+
+# - Degenerate handling -
+
+replication_stop_on_mismatch = off
+                                   # On disagreement with the packet kind
+                                   # sent from backend, degenerate the node
+                                   # which is most likely "minority"
+                                   # If off, just force to exit this session
+
+failover_if_affected_tuples_mismatch = off
+                                   # On disagreement with the number of affected
+                                   # tuples in UPDATE/DELETE queries, then
+                                   # degenerate the node which is most likely
+                                   # "minority".
+                                   # If off, just abort the transaction to
+                                   # keep the consistency
+
+
+#------------------------------------------------------------------------------
+# LOAD BALANCING MODE
+#------------------------------------------------------------------------------
+
+load_balance_mode = on
+                                   # Activate load balancing mode
+                                   # (change requires restart)
+ignore_leading_white_space = on
+                                   # Ignore leading white spaces of each query
+white_function_list = ''
+                                   # Comma separated list of function names
+                                   # that don't write to database
+                                   # Regexp are accepted
+black_function_list = 'currval,lastval,nextval,setval'
+                                   # Comma separated list of function names
+                                   # that write to database
+                                   # Regexp are accepted
+
+
+#------------------------------------------------------------------------------
+# MASTER/SLAVE MODE
+#------------------------------------------------------------------------------
+
+master_slave_mode = on
+                                   # Activate master/slave mode
+                                   # (change requires restart)
+master_slave_sub_mode = 'stream'
+                                   # Master/slave sub mode
+                                   # Valid values are combinations slony or
+                                   # stream. Default is slony.
+                                   # (change requires restart)
+
+# - Streaming -
+
+sr_check_period = 10
+                                   # Streaming replication check period
+                                   # Disabled (0) by default
+sr_check_user = '{{.Values.credentials.pgusername}}'
+                                   # Streaming replication check user
+                                   # This is neccessary even if you disable streaming
+                                   # replication delay check by sr_check_period = 0
+sr_check_password = '{{.Values.credentials.pgpassword}}'
+                                   # Password for streaming replication check user
+delay_threshold = 10000000
+                                   # Threshold before not dispatching query to standby node
+                                   # Unit is in bytes
+                                   # Disabled (0) by default
+
+# - Special commands -
+
+follow_master_command = ''
+                                   # Executes this command after master failover
+                                   # Special values:
+                                   #   %d = node id
+                                   #   %h = host name
+                                   #   %p = port number
+                                   #   %D = database cluster path
+                                   #   %m = new master node id
+                                   #   %H = hostname of the new master node
+                                   #   %M = old master node id
+                                   #   %P = old primary node id
+								   #   %r = new master port number
+								   #   %R = new master database cluster path
+                                   #   %% = '%' character
+
+
+#------------------------------------------------------------------------------
+# PARALLEL MODE
+#------------------------------------------------------------------------------
+
+parallel_mode = off
+                                   # Activates parallel query mode
+                                   # (change requires restart)
+pgpool2_hostname = ''
+                                   # Set pgpool2 hostname
+                                   # (change requires restart)
+
+# - System DB info -
+
+#system_db_hostname  = 'localhost'
+                                   # (change requires restart)
+#system_db_port = 5432
+                                   # (change requires restart)
+#system_db_dbname = 'pgpool'
+                                   # (change requires restart)
+#system_db_schema = 'pgpool_catalog'
+                                   # (change requires restart)
+#system_db_user = 'pgpool'
+                                   # (change requires restart)
+#system_db_password = ''
+                                   # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# HEALTH CHECK
+#------------------------------------------------------------------------------
+
+health_check_period = 20
+                                   # Health check period
+                                   # Disabled (0) by default
+health_check_timeout = 10
+                                   # Health check timeout
+                                   # 0 means no timeout
+health_check_user = '{{.Values.credentials.pgusername}}'
+                                   # Health check user
+health_check_password = '{{.Values.credentials.pgpassword}}'
+                                   # Password for health check user
+health_check_max_retries = 3
+connect_timeout = 10000 		# Timeout value in milliseconds before giving up to connect to backend.
+
+                                   # Maximum number of times to retry a failed health check before giving up.
+health_check_retry_delay = 1
+                                   # Amount of time to wait (in seconds) between retries.
+
+
+#------------------------------------------------------------------------------
+# FAILOVER AND FAILBACK
+#------------------------------------------------------------------------------
+
+failover_command = ''
+                                   # Executes this command at failover
+                                   # Special values:
+                                   #   %d = node id
+                                   #   %h = host name
+                                   #   %p = port number
+                                   #   %D = database cluster path
+                                   #   %m = new master node id
+                                   #   %H = hostname of the new master node
+                                   #   %M = old master node id
+                                   #   %P = old primary node id
+								   #   %r = new master port number
+								   #   %R = new master database cluster path
+                                   #   %% = '%' character
+failback_command = ''
+                                   # Executes this command at failback.
+                                   # Special values:
+                                   #   %d = node id
+                                   #   %h = host name
+                                   #   %p = port number
+                                   #   %D = database cluster path
+                                   #   %m = new master node id
+                                   #   %H = hostname of the new master node
+                                   #   %M = old master node id
+                                   #   %P = old primary node id
+								   #   %r = new master port number
+								   #   %R = new master database cluster path
+                                   #   %% = '%' character
+
+fail_over_on_backend_error = off
+                                   # Initiates failover when reading/writing to the
+                                   # backend communication socket fails
+                                   # If set to off, pgpool will report an
+                                   # error and disconnect the session.
+
+search_primary_node_timeout = 10
+                                   # Timeout in seconds to search for the
+                                   # primary node when a failover occurs.
+                                   # 0 means no timeout, keep searching
+                                   # for a primary node forever.
+
+#------------------------------------------------------------------------------
+# ONLINE RECOVERY
+#------------------------------------------------------------------------------
+
+recovery_user = '{{.Values.credentials.pgusername}}'
+                                   # Online recovery user
+recovery_password = '{{.Values.credentials.pgpassword}}'
+                                   # Online recovery password
+recovery_1st_stage_command = ''
+                                   # Executes a command in first stage
+recovery_2nd_stage_command = ''
+                                   # Executes a command in second stage
+recovery_timeout = 90
+                                   # Timeout in seconds to wait for the
+                                   # recovering node's postmaster to start up
+                                   # 0 means no wait
+client_idle_limit_in_recovery = 0
+                                   # Client is disconnected after being idle
+                                   # for that many seconds in the second stage
+                                   # of online recovery
+                                   # 0 means no disconnection
+                                   # -1 means immediate disconnection
+
+
+#------------------------------------------------------------------------------
+# WATCHDOG
+#------------------------------------------------------------------------------
+
+# - Enabling -
+
+use_watchdog = off
+                                    # Activates watchdog
+                                    # (change requires restart)
+
+# -Connection to up stream servers -
+
+trusted_servers = ''
+                                    # trusted server list which are used
+                                    # to confirm network connection
+                                    # (hostA,hostB,hostC,...)
+                                    # (change requires restart)
+ping_path = '/bin'
+                                    # ping command path
+                                    # (change requires restart)
+
+# - Watchdog communication Settings -
+
+wd_hostname = ''
+                                    # Host name or IP address of this watchdog
+                                    # (change requires restart)
+wd_port = 9000
+                                    # port number for watchdog service
+                                    # (change requires restart)
+wd_authkey = ''
+                                    # Authentication key for watchdog communication
+                                    # (change requires restart)
+
+# - Virtual IP control Setting -
+
+delegate_IP = ''
+                                    # delegate IP address
+                                    # If this is empty, virtual IP never bring up. 
+                                    # (change requires restart)
+ifconfig_path = '/sbin'
+                                    # ifconfig command path
+                                    # (change requires restart)
+if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0'
+                                    # startup delegate IP command
+                                    # (change requires restart)
+if_down_cmd = 'ifconfig eth0:0 down'
+                                    # shutdown delegate IP command
+                                    # (change requires restart)
+
+arping_path = '/usr/sbin'           # arping command path
+                                    # (change requires restart)
+
+arping_cmd = 'arping -U $_IP_$ -w 1'
+                                    # arping command
+                                    # (change requires restart)
+
+# - Behaivor on escalation Setting -
+
+clear_memqcache_on_escalation = on
+                                    # Clear all the query cache on shared memory
+                                    # when standby pgpool escalate to active pgpool
+                                    # (= virtual IP holder).
+                                    # This should be off if client connects to pgpool
+                                    # not using virtual IP.
+                                    # (change requires restart)
+wd_escalation_command = ''
+                                    # Executes this command at escalation on new active pgpool.
+                                    # (change requires restart)
+
+# - Lifecheck Setting - 
+
+# -- common --
+
+wd_lifecheck_method = 'heartbeat'
+                                    # Method of watchdog lifecheck ('heartbeat' or 'query')
+                                    # (change requires restart)
+wd_interval = 10
+                                    # lifecheck interval (sec) > 0
+                                    # (change requires restart)
+
+# -- heartbeat mode --
+
+wd_heartbeat_port = 9694
+                                    # Port number for receiving heartbeat signal
+                                    # (change requires restart)
+wd_heartbeat_keepalive = 2
+                                    # Interval time of sending heartbeat signal (sec)
+                                    # (change requires restart)
+wd_heartbeat_deadtime = 30
+                                    # Deadtime interval for heartbeat signal (sec)
+                                    # (change requires restart)
+heartbeat_destination0 = 'host0_ip1'
+                                    # Host name or IP address of destination 0
+                                    # for sending heartbeat signal.
+                                    # (change requires restart)
+heartbeat_destination_port0 = 9694 
+                                    # Port number of destination 0 for sending
+                                    # heartbeat signal. Usually this is the
+                                    # same as wd_heartbeat_port.
+                                    # (change requires restart)
+heartbeat_device0 = ''
+                                    # Name of NIC device (such like 'eth0')
+                                    # used for sending/receiving heartbeat
+                                    # signal to/from destination 0.
+                                    # This works only when this is not empty
+                                    # and pgpool has root privilege.
+                                    # (change requires restart)
+
+#heartbeat_destination1 = 'host0_ip2'
+#heartbeat_destination_port1 = 9694
+#heartbeat_device1 = ''
+
+# -- query mode --
+
+wd_life_point = 3
+                                    # lifecheck retry times
+                                    # (change requires restart)
+wd_lifecheck_query = 'SELECT 1'
+                                    # lifecheck query to pgpool from watchdog
+                                    # (change requires restart)
+wd_lifecheck_dbname = 'template1'
+                                    # Database name connected for lifecheck
+                                    # (change requires restart)
+wd_lifecheck_user = 'nobody'
+                                    # watchdog user monitoring pgpools in lifecheck
+                                    # (change requires restart)
+wd_lifecheck_password = ''
+                                    # Password for watchdog user in lifecheck
+                                    # (change requires restart)
+
+# - Other pgpool Connection Settings -
+
+#other_pgpool_hostname0 = 'host0'
+                                    # Host name or IP address to connect to for other pgpool 0
+                                    # (change requires restart)
+#other_pgpool_port0 = 5432
+                                    # Port number for othet pgpool 0
+                                    # (change requires restart)
+#other_wd_port0 = 9000
+                                    # Port number for othet watchdog 0
+                                    # (change requires restart)
+#other_pgpool_hostname1 = 'host1'
+#other_pgpool_port1 = 5432
+#other_wd_port1 = 9000
+
+
+#------------------------------------------------------------------------------
+# OTHERS
+#------------------------------------------------------------------------------
+relcache_expire = 0
+                                   # Life time of relation cache in seconds.
+                                   # 0 means no cache expiration(the default).
+                                   # The relation cache is used for cache the
+                                   # query result against PostgreSQL system
+                                   # catalog to obtain various information
+                                   # including table structures or if it's a
+                                   # temporary table or not. The cache is
+                                   # maintained in a pgpool child local memory
+                                   # and being kept as long as it survives.
+                                   # If someone modify the table by using
+                                   # ALTER TABLE or some such, the relcache is
+                                   # not consistent anymore.
+                                   # For this purpose, cache_expiration
+                                   # controls the life time of the cache.
+relcache_size = 256
+                                   # Number of relation cache
+                                   # entry. If you see frequently:
+								   # "pool_search_relcache: cache replacement happend"
+								   # in the pgpool log, you might want to increate this number.
+
+check_temp_table = on
+                                   # If on, enable temporary table check in SELECT statements.
+                                   # This initiates queries against system catalog of primary/master
+								   # thus increases load of master.
+								   # If you are absolutely sure that your system never uses temporary tables
+								   # and you want to save access to primary/master, you could turn this off.
+								   # Default is on.
+
+
+#------------------------------------------------------------------------------
+# ON MEMORY QUERY MEMORY CACHE
+#------------------------------------------------------------------------------
+memory_cache_enabled = off
+								   # If on, use the memory cache functionality, off by default
+memqcache_method = 'shmem'
+								   # Cache storage method. either 'shmem'(shared memory) or
+								   # 'memcached'. 'shmem' by default
+                                   # (change requires restart)
+memqcache_memcached_host = 'localhost'
+								   # Memcached host name or IP address. Mandatory if
+								   # memqcache_method = 'memcached'.
+								   # Defaults to localhost.
+                                   # (change requires restart)
+memqcache_memcached_port = 11211
+								   # Memcached port number. Mondatory if memqcache_method = 'memcached'.
+								   # Defaults to 11211.
+                                   # (change requires restart)
+memqcache_total_size = 67108864
+								   # Total memory size in bytes for storing memory cache.
+								   # Mandatory if memqcache_method = 'shmem'.
+								   # Defaults to 64MB.
+                                   # (change requires restart)
+memqcache_max_num_cache = 1000000
+								   # Total number of cache entries. Mandatory
+								   # if memqcache_method = 'shmem'.
+								   # Each cache entry consumes 48 bytes on shared memory.
+								   # Defaults to 1,000,000(45.8MB).
+                                   # (change requires restart)
+memqcache_expire = 0
+								   # Memory cache entry life time specified in seconds.
+								   # 0 means infinite life time. 0 by default.
+                                   # (change requires restart)
+memqcache_auto_cache_invalidation = on
+								   # If on, invalidation of query cache is triggered by corresponding
+								   # DDL/DML/DCL(and memqcache_expire).  If off, it is only triggered
+								   # by memqcache_expire.  on by default.
+                                   # (change requires restart)
+memqcache_maxcache = 409600
+								   # Maximum SELECT result size in bytes.
+								   # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.
+                                   # (change requires restart)
+memqcache_cache_block_size = 1048576
+								   # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.
+								   # Defaults to 1MB.
+                                   # (change requires restart)
+memqcache_oiddir = '/var/log/pgpool/oiddir'
+				   				   # Temporary work directory to record table oids
+                                   # (change requires restart)
+white_memqcache_table_list = ''
+                                   # Comma separated list of table names to memcache
+                                   # that don't write to database
+                                   # Regexp are accepted
+black_memqcache_table_list = ''
+                                   # Comma separated list of table names not to memcache
+                                   # that don't write to database
+                                   # Regexp are accepted
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf
new file mode 100644
index 0000000000..d8918409e8
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_hba.conf
@@ -0,0 +1,67 @@
+# pgpool Client Authentication Configuration File a custom version
+# ===============================================
+#
+# The format rule in this file follows the rules in the PostgreSQL
+# Administrator's Guide. Refer to chapter "Client Authentication" for a
+# complete description.  A short synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which user names they can use, which databases they
+# can access.  Records take one of these forms:
+#
+# local      DATABASE  USER  METHOD  [OPTION]
+# host       DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTION]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain
+# socket, "host" is either a plain or SSL-encrypted TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", a database name, or a comma-separated
+# list thereof. Note that "samegroup" like in PostgreSQL's pg_hba.conf
+# file is not supported, since pgpool does not know which group a user
+# belongs to. Also note that the database specified here may not exist in
+# the backend PostgreSQL. pgpool will authenticate based on the database's
+# name, not based on whether it exists or not.
+#
+# USER can be "all", a user name, or a comma-separated list thereof.  In
+# both the DATABASE and USER fields you can also write a file name prefixed
+# with "@" to include names from a separate file. Note that a group name
+# prefixed with "+" like in PostgreSQL's pg_hba.conf file is not supported
+# because of the same reason as "samegroup" token. Also note that a user
+# name specified here may not exist in the backend PostgreSQL. pgpool will
+# authenticate based on the user's name, not based on whether he/she exists.
+#
+# CIDR-ADDRESS specifies the set of hosts the record matches.
+# It is made up of an IP address and a CIDR mask that is an integer
+# (between 0 and 32 (IPv4) that specifies the number of significant bits in
+# the mask.  Alternatively, you can write an IP address and netmask in
+# separate columns to specify the set of hosts.
+#
+# METHOD can be "trust", "reject", "md5" or "pam".  Note that "pam" sends passwords
+# in clear text.
+#
+# OPTION is the name of the PAM service. Default service name is "pgpool"
+#
+# Database and user names containing spaces, commas, quotes and other special
+# characters must be quoted. Quoting one of the keywords "all" or "sameuser"
+# makes the name lose its special character, and just match a database or
+# username with that name.
+#
+# This file is read on pgpool startup.  If you edit the file on a running
+# system, you have to restart the pgpool  for the changes to take effect.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records. In that case you will also need to make pgpool listen
+# on a non-local interface via the listen_addresses configuration parameter.
+#
+
+# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
+
+# "local" is for Unix domain socket connections only
+#local   all         all                               trust
+# IPv4 local connections:
+host    all         all         0.0.0.0/0          md5
diff --git a/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd
new file mode 100644
index 0000000000..3636d1de74
--- /dev/null
+++ b/kubernetes/common/postgres-legacy/charts/pgpool/configs/pool_passwd
@@ -0,0 +1,2 @@
+testuser:md599e8713364988502fa6189781bcf648f
+postgres:md53175bce1d3201d16594cebf9d7eb3f9d