Merge "Add frontend container"

4 files changed, 23 insertions, 387 deletions

diff --git a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml
deleted file mode 100644
index dab2e44f5e..0000000000
--- a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml
+++ /dev/null
@@ -1,53 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
-  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
-  paths:
-    - /var/log/onap/*/*/*/*.log
-    - /var/log/onap/*/*/*.log
-    - /var/log/onap/*/*.log
-  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
-  ignore_older: 48h
-  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
-  clean_inactive: 96h
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
-  #List of logstash server ip addresses with port number.
-  #But, in our case, this will be the loadbalancer IP address.
-  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
-  hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"]
-  #If enable will do load balancing among availabe Logstash, automatically.
-  loadbalance: true
-
-  #The list of root certificates for server verifications.
-  #If certificate_authorities is empty or not set, the trusted
-  #certificate authorities of the host system are used.
-  #ssl.certificate_authorities: $ssl.certificate_authorities
-
-  #The path to the certificate for SSL client authentication. If the certificate is not specified,
-  #client authentication is not available.
-  #ssl.certificate: $ssl.certificate
-
-  #The client certificate key used for client authentication.
-  #ssl.key: $ssl.key
-
-  #The passphrase used to decrypt an encrypted key stored in the configured key file
-  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/clamp/resources/config/logback.xml b/kubernetes/clamp/resources/config/logback.xml
deleted file mode 100644
index 551ed34ee4..0000000000
--- a/kubernetes/clamp/resources/config/logback.xml
+++ /dev/null
@@ -1,316 +0,0 @@
-<?xml version = "1.0" encoding = "UTF-8" ?>
-<!--
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--->
-<included>
-	<jmxConfigurator />
-	<!-- Example evaluator filter applied against console appender -->
-	<property
-		name="p_tim"
-		value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}" />
-	<property
-		name="p_lvl"
-		value="%level" />
-	<property
-		name="p_log"
-		value="%logger" />
-	<property
-		name="p_mdc"
-		value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" />
-	<property
-		name="p_msg"
-		value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" />
-	<property
-		name="p_exc"
-		value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" />
-	<property
-		name="p_mak"
-		value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" />
-	<property
-		name="p_thr"
-		value="%thread" />
-	<property
-		name="defaultPattern"
-		value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
-	<property
-		name="debugPattern"
-		value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" />
-
-	<!-- Example evaluator filter applied against console appender -->
-	<appender
-		name="STDOUT"
-		class="ch.qos.logback.core.ConsoleAppender">
-		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-			<level>INFO</level>
-		</filter>
-		<encoder>
-			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
-			</pattern>
-		</encoder>
-	</appender>
-
-	<appender
-		name="ERROR"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-			<level>INFO</level>
-		</filter>
-		<file>${logDirectory}/error.log</file>
-		<append>true</append>
-		<encoder>
-			<pattern>${defaultPattern}</pattern>
-		</encoder>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
-			<fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip
-			</fileNamePattern>
-			<maxFileSize>50MB</maxFileSize>
-			<maxHistory>30</maxHistory>
-			<totalSizeCap>10GB</totalSizeCap>
-		</rollingPolicy>
-		<triggeringPolicy
-			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
-			<maxFileSize>10MB</maxFileSize>
-		</triggeringPolicy>
-	</appender>
-
-	<appender
-		name="DEBUG"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<file>${logDirectory}/debug.log</file>
-		<append>true</append>
-		<encoder>
-			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
-			</pattern>
-		</encoder>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
-			<fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip
-			</fileNamePattern>
-			<maxFileSize>50MB</maxFileSize>
-			<maxHistory>30</maxHistory>
-			<totalSizeCap>10GB</totalSizeCap>
-		</rollingPolicy>
-	</appender>
-
-
-	<appender
-		name="AUDIT"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<file>${logDirectory}/audit.log</file>
-		<append>true</append>
-		<encoder>
-			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
-			</pattern>
-		</encoder>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
-			<maxIndex>10</maxIndex>
-			<FileNamePattern>${logDirectory}/audit.%i.log.zip
-			</FileNamePattern>
-		</rollingPolicy>
-		<triggeringPolicy
-			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
-			<maxFileSize>10MB</maxFileSize>
-		</triggeringPolicy>
-	</appender>
-	<appender
-		name="asyncEELFAudit"
-		class="ch.qos.logback.classic.AsyncAppender">
-		<queueSize>256</queueSize>
-		<appender-ref ref="AUDIT" />
-	</appender>
-
-	<appender
-		name="METRIC"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<file>${logDirectory}/metric.log</file>
-		<append>true</append>
-		<encoder>
-			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
-				%msg%n</pattern>
-		</encoder>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
-			<maxIndex>10</maxIndex>
-			<FileNamePattern>${logDirectory}/metric.%i.log.zip
-			</FileNamePattern>
-		</rollingPolicy>
-		<triggeringPolicy
-			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
-			<maxFileSize>10MB</maxFileSize>
-		</triggeringPolicy>
-	</appender>
-	<appender
-		name="asyncEELFMetrics"
-		class="ch.qos.logback.classic.AsyncAppender">
-		<queueSize>256</queueSize>
-		<appender-ref ref="METRIC" />
-	</appender>
-
-	<!-- SECURITY related loggers -->
-	<appender
-		name="SECURITY"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<file>${logDirectory}/security.log</file>
-		<append>true</append>
-		<encoder>
-			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
-			</pattern>
-		</encoder>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
-			<maxIndex>10</maxIndex>
-			<FileNamePattern>${logDirectory}/security.%i.log.zip
-			</FileNamePattern>
-		</rollingPolicy>
-		<triggeringPolicy
-			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
-			<maxFileSize>10MB</maxFileSize>
-		</triggeringPolicy>
-	</appender>
-	<appender
-		name="asyncEELFSecurity"
-		class="ch.qos.logback.classic.AsyncAppender">
-		<queueSize>256</queueSize>
-		<appender-ref ref="SECURITY" />
-	</appender>
-	<!-- logback jms appenders & loggers definition starts here -->
-	<appender
-		name="auditLogs"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-		</filter>
-		<file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
-			<fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
-			</fileNamePattern>
-			<minIndex>1</minIndex>
-			<maxIndex>9</maxIndex>
-		</rollingPolicy>
-		<triggeringPolicy
-			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
-			<maxFileSize>5MB</maxFileSize>
-		</triggeringPolicy>
-		<encoder>
-			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
-		</encoder>
-	</appender>
-	<appender
-		name="perfLogs"
-		class="ch.qos.logback.core.rolling.RollingFileAppender">
-		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
-		</filter>
-		<file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
-		<rollingPolicy
-			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
-			<fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
-			</fileNamePattern>
-			<minIndex>1</minIndex>
-			<maxIndex>9</maxIndex>
-		</rollingPolicy>
-		<triggeringPolicy
-			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
-			<maxFileSize>5MB</maxFileSize>
-		</triggeringPolicy>
-		<encoder>
-			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
-		</encoder>
-	</appender>
-
-	<logger
-		name="org.onap.aaf"
-		level="DEBUG">
-		<appender-ref ref="DEBUG" />
-	</logger>
-	<logger
-		name="org.apache"
-		level="DEBUG">
-		<appender-ref ref="DEBUG" />
-	</logger>
-	<!-- Spring related loggers -->
-	<logger
-		name="org.springframework"
-		level="DEBUG">
-		<appender-ref ref="DEBUG" />
-	</logger>
-
-	<!-- CLDS related loggers -->
-	<logger
-		name="org.onap.clamp"
-		level="DEBUG">
-		<appender-ref ref="ERROR" />
-		<appender-ref ref="DEBUG" />
-	</logger>
-
-	<!-- CLDS related loggers -->
-	<logger
-		name="com.att.eelf.error"
-		level="OFF">
-		<appender-ref ref="ERROR" />
-	</logger>
-	<!-- EELF related loggers -->
-	<logger
-		name="com.att.eelf.audit"
-		level="INFO"
-		additivity="false">
-		<appender-ref ref="asyncEELFAudit" />
-	</logger>
-	<logger
-		name="com.att.eelf.metrics"
-		level="DEBUG"
-		additivity="false">
-		<appender-ref ref="asyncEELFMetrics" />
-	</logger>
-	<logger
-		name="com.att.eelf.security"
-		level="DEBUG"
-		additivity="false">
-		<appender-ref ref="asyncEELFSecurity" />
-	</logger>
-
-	<!-- logback internals logging -->
-	<logger
-		name="ch.qos.logback.classic"
-		level="INFO" />
-	<logger
-		name="ch.qos.logback.core"
-		level="INFO" />
-	<logger
-		name="AuditRecord"
-		level="INFO"
-		additivity="false">
-		<appender-ref ref="auditLogs" />
-	</logger>
-	<logger
-		name="AuditRecord_DirectCall"
-		level="INFO"
-		additivity="false">
-		<appender-ref ref="auditLogs" />
-	</logger>
-	<logger
-		name="PerfTrackerRecord"
-		level="INFO"
-		additivity="false">
-		<appender-ref ref="perfLogs" />
-	</logger>
-	<!-- logback jms appenders & loggers definition ends here -->
-
-	<root level="DEBUG">
-		<appender-ref ref="DEBUG" />
-		<appender-ref ref="STDOUT" />
-	</root>
-</included>
diff --git a/kubernetes/clamp/resources/config/nginx.conf b/kubernetes/clamp/resources/config/nginx.conf
new file mode 100644
index 0000000000..ce94eff70f
--- /dev/null
+++ b/kubernetes/clamp/resources/config/nginx.conf
@@ -0,0 +1,23 @@
+server {
+
+  listen 443 default ssl;
+  ssl_protocols TLSv1.2;
+  ssl_certificate /etc/ssl/clamp.pem;
+  ssl_certificate_key /etc/ssl/clamp.key;
+    location /restservices/clds/ {
+        proxy_pass https://clamp-backend:443;
+    }
+
+  location / {
+    root   /usr/share/nginx/html;
+    index  index.html index.htm;
+    try_files $uri $uri/ /index.html;
+  }
+
+  error_page   500 502 503 504  /50x.html;
+
+  location = /50x.html {
+    root   /usr/share/nginx/html;
+  }
+
+}
diff --git a/kubernetes/clamp/resources/config/sdc-controllers-config.json b/kubernetes/clamp/resources/config/sdc-controllers-config.json
deleted file mode 100644
index 3adda95c11..0000000000
--- a/kubernetes/clamp/resources/config/sdc-controllers-config.json
+++ /dev/null
@@ -1,18 +0,0 @@
-{
-  "sdc-connections":{
-    "sdc-controller":{
-        "user": "clamp",
-        "consumerGroup": "clamp",
-        "consumerId": "clamp",
-        "environmentName": "AUTO",
-        "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443",
-        "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
-        "pollingInterval":30,
-        "pollingTimeout":30,
-        "activateServerTLSAuth":"false",
-        "keyStorePassword":"",
-        "keyStorePath":"",
-        "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"]
-    }
-  }
-}