Merge "[POLICY] Migration of clamp to policy area"

14 files changed, 0 insertions, 1208 deletions

diff --git a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml
deleted file mode 100644
index c0de18592c..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: MariaDB Service
-name: clamp-mariadb
-version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt
deleted file mode 100644
index 1103affff1..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml
deleted file mode 100644
index d62ef09a4d..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml
+++ /dev/null
@@ -1,21 +0,0 @@
-# Copyright © 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
-  - name: common
-    version: ~7.x-0
-    repository: '@local'
-  - name: repositoryGenerator
-    version: ~7.x-0
-    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh
deleted file mode 100755
index 71f32e2eff..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh
+++ /dev/null
@@ -1,198 +0,0 @@
-#!/bin/bash
-set -eo pipefail
-shopt -s nullglob
-
-# if command starts with an option, prepend mysqld
-if [ "${1:0:1}" = '-' ]; then
-	set -- mysqld "$@"
-fi
-
-# skip setup if they want an option that stops mysqld
-wantHelp=
-for arg; do
-	case "$arg" in
-		-'?'|--help|--print-defaults|-V|--version)
-			wantHelp=1
-			break
-			;;
-	esac
-done
-
-prepare_password()
-{
-	echo "$1" | sed -e "s/'/\\\\'/g; s/\"/\\\\\"/g"
-}
-
-# usage: file_env VAR [DEFAULT]
-#    ie: file_env 'XYZ_DB_PASSWORD' 'example'
-# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of
-#  "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature)
-file_env() {
-	local var="$1"
-	local fileVar="${var}_FILE"
-	local def="${2:-}"
-	if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then
-		echo >&2 "error: both $var and $fileVar are set (but are exclusive)"
-		exit 1
-	fi
-	local val="$def"
-	if [ "${!var:-}" ]; then
-		val="${!var}"
-	elif [ "${!fileVar:-}" ]; then
-		val="$(< "${!fileVar}")"
-	fi
-	val=`prepare_password $val`
-	export "$var"="$val"
-	unset "$fileVar"
-}
-
-_check_config() {
-	toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" )
-	if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then
-		cat >&2 <<-EOM
-
-			ERROR: mysqld failed while attempting to check config
-			command was: "${toRun[*]}"
-
-			$errors
-		EOM
-		exit 1
-	fi
-}
-
-# Fetch value from server config
-# We use mysqld --verbose --help instead of my_print_defaults because the
-# latter only show values present in config files, and not server defaults
-_get_config() {
-	local conf="$1"; shift
-	"$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \
-		| awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }'
-	# match "datadir      /some/path with/spaces in/it here" but not "--xyz=abc\n     datadir (xyz)"
-}
-
-# allow the container to be started with `--user`
-if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then
-	_check_config "$@"
-	DATADIR="$(_get_config 'datadir' "$@")"
-	mkdir -p "$DATADIR"
-	find "$DATADIR" \! -user mysql -exec chown mysql '{}' +
-	exec gosu mysql "$BASH_SOURCE" "$@"
-fi
-
-if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then
-	# still need to check config, container may have started with --user
-	_check_config "$@"
-	# Get config
-	DATADIR="$(_get_config 'datadir' "$@")"
-
-	if [ ! -d "$DATADIR/mysql" ]; then
-		file_env 'MYSQL_ROOT_PASSWORD'
-		if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then
-			echo >&2 'error: database is uninitialized and password option is not specified '
-			echo >&2 '  You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD'
-			exit 1
-		fi
-
-		mkdir -p "$DATADIR"
-
-		echo 'Initializing database'
-		# "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here)
-		mysql_install_db --datadir="$DATADIR" --rpm "${@:2}"
-		echo 'Database initialized'
-
-		SOCKET="$(_get_config 'socket' "$@")"
-		"$@" --skip-networking --socket="${SOCKET}" &
-		pid="$!"
-
-		mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" )
-
-		for i in {30..0}; do
-			if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then
-				break
-			fi
-			echo 'MySQL init process in progress...'
-			sleep 1
-		done
-		if [ "$i" = 0 ]; then
-			echo >&2 'MySQL init process failed.'
-			exit 1
-		fi
-
-		if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then
-			# sed is for https://bugs.mysql.com/bug.php?id=20545
-			mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql
-		fi
-
-		if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then
-			export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)"
-			echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD"
-		fi
-
-		rootCreate=
-		# default root to listen for connections from anywhere
-		file_env 'MYSQL_ROOT_HOST' '%'
-		if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then
-			# no, we don't care if read finds a terminating character in this heredoc
-			# https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151
-			read -r -d '' rootCreate <<-EOSQL || true
-				CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ;
-				GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ;
-			EOSQL
-		fi
-
-		"${mysql[@]}" <<-EOSQL
-			-- What's done in this file shouldn't be replicated
-			--  or products like mysql-fabric won't work
-			SET @@SESSION.SQL_LOG_BIN=0;
-
-			DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ;
-			SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ;
-			GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ;
-			${rootCreate}
-			DROP DATABASE IF EXISTS test ;
-			FLUSH PRIVILEGES ;
-		EOSQL
-
-		if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then
-			mysql+=( -p"${MYSQL_ROOT_PASSWORD}" )
-		fi
-
-		file_env 'MYSQL_DATABASE'
-		if [ "$MYSQL_DATABASE" ]; then
-			echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}"
-			mysql+=( "$MYSQL_DATABASE" )
-		fi
-
-		file_env 'MYSQL_USER'
-		file_env 'MYSQL_PASSWORD'
-		if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then
-			echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}"
-
-			if [ "$MYSQL_DATABASE" ]; then
-				echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}"
-			fi
-		fi
-
-		echo
-		for f in /docker-entrypoint-initdb.d/*; do
-			case "$f" in
-				*.sh)     echo "$0: running $f"; . "$f" ;;
-				*.sql)    echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;;
-				*.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;;
-				*)        echo "$0: ignoring $f" ;;
-			esac
-			echo
-		done
-
-		if ! kill -s TERM "$pid" || ! wait "$pid"; then
-			echo >&2 'MySQL init process failed.'
-			exit 1
-		fi
-
-		echo
-		echo 'MySQL init process done. Ready for start up.'
-		echo
-	fi
-fi
-
-exec "$@"
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
deleted file mode 100644
index 8b5dc2a021..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
+++ /dev/null
@@ -1,209 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# Example MySQL config file for medium systems.
-#
-# This is for a system with memory 8G where MySQL plays
-# an important part, or systems up to 128M where MySQL is used together with
-# other programs (such as a web server)
-#
-# In this file, you can use all long options that a program supports.
-# If you want to know which options a program supports, run the program
-# with the "--help" option.
-*/}}
-
-# The following options will be passed to all MySQL clients
-##[client]
-##user            = root
-##port            = 3306
-##socket          = //opt/app/mysql/mysql.sock
-
-# Here follows entries for some specific programs
-
-# The MySQL server
-[mysqld]
-##performance_schema
-
-slow_query_log =ON
-long_query_time =2
-slow_query_log_file =//var/lib/mysql/slow_query.log
-##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
-##datadir         = //opt/app/mysql/data
-##port            = 3306
-##socket          = //opt/app/mysql/mysql.sock
-skip-external-locking
-explicit_defaults_for_timestamp = true
-skip-symbolic-links
-local-infile = 0
-#ignore_db_dir=lost+found
-key_buffer_size = 16M
-max_allowed_packet = 4M
-table_open_cache = 100
-sort_buffer_size = 512K
-net_buffer_length = 8K
-read_buffer_size = 256K
-read_rnd_buffer_size = 512K
-myisam_sort_buffer_size = 8M
-max_connections = 500
-lower_case_table_names = 1
-thread_stack = 256K
-thread_cache_size = 25
-query_cache_size = 8M
-query_cache_type = 0
-query_prealloc_size = 512K
-query_cache_limit = 1M
-
-# Password validation
-##plugin-load-add=simple_password_check.so
-##simple_password_check_other_characters=0
-
-# Audit Log settings
-plugin-load-add=server_audit.so
-server_audit=FORCE_PLUS_PERMANENT
-server_audit_file_path=//var/lib/mysql/audit.log
-server_audit_file_rotate_size=50M
-server_audit_events=CONNECT,QUERY,TABLE
-server_audit_logging=on
-
-# Don't listen on a TCP/IP port at all. This can be a security enhancement,
-# if all processes that need to connect to mysqld run on the same host.
-# All interaction with mysqld must be made via Unix sockets or named pipes.
-# Note that using this option without enabling named pipes on Windows
-# (via the "enable-named-pipe" option) will render mysqld useless!
-#
-#skip-networking
-
-# Replication Master Server (default)
-# binary logging is required for replication
-##log-bin=//var/lib/mysql/mysql-bin
-
-# binary logging format - mixed recommended
-binlog_format=row
-
-# required unique id between 1 and 2^32 - 1
-# defaults to 1 if master-host is not set
-# but will not function as a master if omitted
-
-# Replication Slave (comment out master section to use this)
-#
-# To configure this host as a replication slave, you can choose between
-# two methods :
-#
-# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
-#    the syntax is:
-#
-#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
-#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
-#
-#    where you replace <host>, <user>, <password> by quoted strings and
-#    <port> by the master's port number (3306 by default).
-#
-#    Example:
-#
-#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
-#    MASTER_USER='joe', MASTER_PASSWORD='secret';
-#
-# OR
-#
-# 2) Set the variables below. However, in case you choose this method, then
-#    start replication for the first time (even unsuccessfully, for example
-#    if you mistyped the password in master-password and the slave fails to
-#    connect), the slave will create a master.info file, and any later
-#    change in this file to the variables' values below will be ignored and
-#    overridden by the content of the master.info file, unless you shutdown
-#    the slave server, delete master.info and restart the slaver server.
-#    For that reason, you may want to leave the lines below untouched
-#    (commented) and instead use CHANGE MASTER TO (see above)
-#
-# required unique id between 2 and 2^32 - 1
-# (and different from the master)
-# defaults to 2 if master-host is set
-# but will not function as a slave if omitted
-#server-id       = 2
-#
-# The replication master for this slave - required
-#master-host     =   <hostname>
-#
-# The username the slave will use for authentication when connecting
-# to the master - required
-#master-user     =   <username>
-#
-# The password the slave will authenticate with when connecting to
-# the master - required
-#master-password =   <password>
-#
-# The port the master is listening on.
-# optional - defaults to 3306
-#master-port     =  <port>
-#
-# binary logging - not required for slaves, but recommended
-#log-bin=mysql-bin
-
-# Uncomment the following if you are using InnoDB tables
-##innodb_data_home_dir = //opt/app/mysql/data
-##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
-##innodb_log_group_home_dir = //opt/app/mysql/iblogs
-# You can set .._buffer_pool_size up to 50 - 80 %
-# of RAM but beware of setting memory usage too high
-innodb_buffer_pool_size = 128M
-#innodb_additional_mem_pool_size = 2M
-# Set .._log_file_size to 25 % of buffer pool size
-innodb_log_file_size = 10M
-innodb_log_files_in_group = 3
-innodb_log_buffer_size = 8M
-#innodb_flush_log_at_trx_commit = 1
-innodb_lock_wait_timeout = 50
-innodb_autoextend_increment = 100
-expire_logs_days = 8
-open_files_limit = 2000
-transaction-isolation=READ-COMMITTED
-####### Galera parameters #######
-## Galera Provider configuration
-wsrep_provider=/usr/lib/galera/libgalera_smm.so
-wsrep_provider_options="gcache.size=128M; gcache.page_size=10M"
-## Galera Cluster configuration
-wsrep_cluster_name="MSO-automated-tests-cluster"
-wsrep_cluster_address="gcomm://"
-#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
-##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
-## Galera Synchronization configuration
-wsrep_sst_method=rsync
-#wsrep_sst_method=xtrabackup-v2
-#wsrep_sst_auth="sstuser:Mon#2o!6"
-## Galera Node configuration
-wsrep_node_name="mariadb1"
-##wsrep_node_address="192.169.3.184"
-wsrep_on=OFF
-## Status notification
-#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
-#######
-
-
-[mysqldump]
-quick
-max_allowed_packet = 16M
-
-[mysql]
-no-auto-rehash
-# Remove the next comment character if you are not familiar with SQL
-#safe-updates
-
-[myisamchk]
-key_buffer_size = 20971520
-
-##[mysqlhotcopy]
-##interactive-timeout
-##[mysqld_safe]
-##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
-##log-error=//opt/app/mysql/log/mysqld.log
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql
deleted file mode 100644
index 1f153bce04..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql
+++ /dev/null
@@ -1,257 +0,0 @@
-
-    create table dictionary (
-       name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        dictionary_second_level integer,
-        dictionary_type varchar(255),
-        primary key (name)
-    ) engine=InnoDB;
-
-    create table dictionary_elements (
-       short_name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        description varchar(255) not null,
-        name varchar(255) not null,
-        subdictionary_name varchar(255),
-        type varchar(255) not null,
-        primary key (short_name)
-    ) engine=InnoDB;
-
-    create table dictionary_to_dictionaryelements (
-       dictionary_name varchar(255) not null,
-        dictionary_element_short_name varchar(255) not null,
-        primary key (dictionary_name, dictionary_element_short_name)
-    ) engine=InnoDB;
-
-    create table hibernate_sequence (
-       next_val bigint
-    ) engine=InnoDB;
-
-    insert into hibernate_sequence values ( 1 );
-
-    create table loop_element_models (
-       name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        blueprint_yaml MEDIUMTEXT,
-        dcae_blueprint_id varchar(255),
-        loop_element_type varchar(255) not null,
-        short_name varchar(255),
-        primary key (name)
-    ) engine=InnoDB;
-
-    create table loop_logs (
-       id bigint not null,
-        log_component varchar(255) not null,
-        log_instant datetime(6) not null,
-        log_type varchar(255) not null,
-        message MEDIUMTEXT not null,
-        loop_id varchar(255) not null,
-        primary key (id)
-    ) engine=InnoDB;
-
-    create table loop_templates (
-       name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        allowed_loop_type varchar(255),
-        blueprint_yaml MEDIUMTEXT,
-        dcae_blueprint_id varchar(255),
-        maximum_instances_allowed integer,
-        svg_representation MEDIUMTEXT,
-        unique_blueprint boolean default false,
-        service_uuid varchar(255),
-        primary key (name)
-    ) engine=InnoDB;
-
-    create table loopelementmodels_to_policymodels (
-       loop_element_name varchar(255) not null,
-        policy_model_type varchar(255) not null,
-        policy_model_version varchar(255) not null,
-        primary key (loop_element_name, policy_model_type, policy_model_version)
-    ) engine=InnoDB;
-
-    create table loops (
-       name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        dcae_deployment_id varchar(255),
-        dcae_deployment_status_url varchar(255),
-        global_properties_json json,
-        last_computed_state varchar(255) not null,
-        svg_representation MEDIUMTEXT,
-        loop_template_name varchar(255) not null,
-        service_uuid varchar(255),
-        primary key (name)
-    ) engine=InnoDB;
-
-    create table loops_to_microservicepolicies (
-       loop_name varchar(255) not null,
-        microservicepolicy_name varchar(255) not null,
-        primary key (loop_name, microservicepolicy_name)
-    ) engine=InnoDB;
-
-    create table looptemplates_to_loopelementmodels (
-       loop_element_model_name varchar(255) not null,
-        loop_template_name varchar(255) not null,
-        flow_order integer not null,
-        primary key (loop_element_model_name, loop_template_name)
-    ) engine=InnoDB;
-
-    create table micro_service_policies (
-       name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        configurations_json json,
-        json_representation json not null,
-        pdp_group varchar(255),
-        pdp_sub_group varchar(255),
-        context varchar(255),
-        dcae_blueprint_id varchar(255),
-        dcae_deployment_id varchar(255),
-        dcae_deployment_status_url varchar(255),
-        device_type_scope varchar(255),
-        shared bit not null,
-        loop_element_model_id varchar(255),
-        policy_model_type varchar(255),
-        policy_model_version varchar(255),
-        primary key (name)
-    ) engine=InnoDB;
-
-    create table operational_policies (
-       name varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        configurations_json json,
-        json_representation json not null,
-        pdp_group varchar(255),
-        pdp_sub_group varchar(255),
-        loop_element_model_id varchar(255),
-        policy_model_type varchar(255),
-        policy_model_version varchar(255),
-        loop_id varchar(255) not null,
-        primary key (name)
-    ) engine=InnoDB;
-
-    create table policy_models (
-       policy_model_type varchar(255) not null,
-        version varchar(255) not null,
-        created_by varchar(255),
-        created_timestamp datetime(6) not null,
-        updated_by varchar(255),
-        updated_timestamp datetime(6) not null,
-        policy_acronym varchar(255),
-        policy_tosca MEDIUMTEXT,
-        policy_pdp_group json,
-        primary key (policy_model_type, version)
-    ) engine=InnoDB;
-
-    create table services (
-       service_uuid varchar(255) not null,
-        name varchar(255) not null,
-        resource_details json,
-        service_details json,
-        version varchar(255),
-        primary key (service_uuid)
-    ) engine=InnoDB;
-
-    alter table dictionary_to_dictionaryelements
-       add constraint FK68hjjinnm8nte2owstd0xwp23
-       foreign key (dictionary_element_short_name)
-       references dictionary_elements (short_name);
-
-    alter table dictionary_to_dictionaryelements
-       add constraint FKtqfxg46gsxwlm2gkl6ne3cxfe
-       foreign key (dictionary_name)
-       references dictionary (name);
-
-    alter table loop_logs
-       add constraint FK1j0cda46aickcaoxqoo34khg2
-       foreign key (loop_id)
-       references loops (name);
-
-    alter table loop_templates
-       add constraint FKn692dk6281wvp1o95074uacn6
-       foreign key (service_uuid)
-       references services (service_uuid);
-
-    alter table loopelementmodels_to_policymodels
-       add constraint FK23j2q74v6kaexefy0tdabsnda
-       foreign key (policy_model_type, policy_model_version)
-       references policy_models (policy_model_type, version);
-
-    alter table loopelementmodels_to_policymodels
-       add constraint FKjag1iu0olojfwryfkvb5o0rk5
-       foreign key (loop_element_name)
-       references loop_element_models (name);
-
-    alter table loops
-       add constraint FK844uwy82wt0l66jljkjqembpj
-       foreign key (loop_template_name)
-       references loop_templates (name);
-
-    alter table loops
-       add constraint FK4b9wnqopxogwek014i1shqw7w
-       foreign key (service_uuid)
-       references services (service_uuid);
-
-    alter table loops_to_microservicepolicies
-       add constraint FKle255jmi7b065fwbvmwbiehtb
-       foreign key (microservicepolicy_name)
-       references micro_service_policies (name);
-
-    alter table loops_to_microservicepolicies
-       add constraint FK8avfqaf7xl71l7sn7a5eri68d
-       foreign key (loop_name)
-       references loops (name);
-
-    alter table looptemplates_to_loopelementmodels
-       add constraint FK1k7nbrbugvqa0xfxkq3cj1yn9
-       foreign key (loop_element_model_name)
-       references loop_element_models (name);
-
-    alter table looptemplates_to_loopelementmodels
-       add constraint FKj29yxyw0x7ue6mwgi6d3qg748
-       foreign key (loop_template_name)
-       references loop_templates (name);
-
-    alter table micro_service_policies
-       add constraint FKqvvdypacbww07fuv8xvlvdjgl
-       foreign key (loop_element_model_id)
-       references loop_element_models (name);
-
-    alter table micro_service_policies
-       add constraint FKn17j9ufmyhqicb6cvr1dbjvkt
-       foreign key (policy_model_type, policy_model_version)
-       references policy_models (policy_model_type, version);
-
-    alter table operational_policies
-       add constraint FKi9kh7my40737xeuaye9xwbnko
-       foreign key (loop_element_model_id)
-       references loop_element_models (name);
-
-    alter table operational_policies
-       add constraint FKlsyhfkoqvkwj78ofepxhoctip
-       foreign key (policy_model_type, policy_model_version)
-       references policy_models (policy_model_type, version);
-
-    alter table operational_policies
-       add constraint FK1ddoggk9ni2bnqighv6ecmuwu
-       foreign key (loop_id)
-       references loops (name);
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt
deleted file mode 100644
index 1103affff1..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml
deleted file mode 100644
index b8a774acbe..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml
+++ /dev/null
@@ -1,57 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-#{{ if not .Values.disableClampClampMariadb }}
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: clamp-entrypoint-bulkload-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: clamp-mariadb-conf-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/init/*").AsConfig . | indent 2 }}
-#{{ end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml
deleted file mode 100644
index 8ddf584988..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml
+++ /dev/null
@@ -1,113 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      containers:
-        - name: {{ include "common.name" .  }}
-          image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.image }}
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          # disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end -}}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: MYSQL_USER
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }}
-          - name: MYSQL_PASSWORD
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }}
-          - name: MYSQL_ROOT_PASSWORD
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 12 }}
-          - name: MYSQL_DATABASE
-            value: {{ tpl .Values.db.databaseName .}}
-          volumeMounts:
-          - mountPath: /docker-entrypoint.sh
-            subPath: docker-entrypoint.sh
-            name: init-script
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /docker-entrypoint-initdb.d/
-            name: docker-entrypoint-bulkload
-          - mountPath: /etc/mysql/conf.d/conf1/
-            name:  clamp-mariadb-conf
-          - mountPath: /var/lib/mysql
-            name: clamp-mariadb-data
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-      volumes:
-      {{- if .Values.persistence.enabled }}
-        - name: clamp-mariadb-data
-          persistentVolumeClaim:
-            claimName: {{ include "common.fullname" . }}
-      {{- else }}
-          emptyDir: {}
-      {{- end }}
-        - name: docker-entrypoint-bulkload
-          configMap:
-            name: clamp-entrypoint-bulkload-configmap
-        - name: clamp-mariadb-conf
-          configMap:
-            name: clamp-mariadb-conf-configmap
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: init-script
-          configMap:
-            name: {{ include "common.fullname" . }}
-            defaultMode: 0755
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml
deleted file mode 100644
index 424987936d..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-{{- if eq "True" (include "common.needPV" .) -}}
-kind: PersistentVolume
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}-data
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-    name: {{ include "common.fullname" . }}
-spec:
-  capacity:
-    storage: {{ .Values.persistence.size}}
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  storageClassName: "{{ include "common.fullname" . }}-data"
-  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
-  hostPath:
-    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
-{{- end -}}
-{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml
deleted file mode 100644
index 6856c80540..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml
+++ /dev/null
@@ -1,40 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-{{- if .Values.persistence.annotations }}
-  annotations:
-{{ toYaml .Values.persistence.annotations | indent 4 }}
-{{- end }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.size }}
-  storageClassName: {{ include "common.storageClass" . }}
-{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml
deleted file mode 100644
index 4cf8155f6c..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{ include "common.secretFast" . }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml
deleted file mode 100644
index 20a5065503..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-    {{- end}}
-      name: {{ .Values.service.portName }}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/values.yaml b/kubernetes/clamp/components/clamp-mariadb/values.yaml
deleted file mode 100644
index 60b2cfef4f..0000000000
--- a/kubernetes/clamp/components/clamp-mariadb/values.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018-2019 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global: # global defaults
-  nodePortPrefix: 302
-
-  persistence: {}
-# application image
-image: mariadb:10.5.4
-pullPolicy: Always
-flavor: small
-#################################################################
-# Secrets metaconfig
-#################################################################
-secrets:
-  - uid: db-root-pass
-    type: password
-    externalSecret: '{{ tpl (default "" .Values.db.rootCredsExternalSecret) . }}'
-    password: '{{ .Values.db.rootPass }}'
-  - uid: db-secret
-    type: basicAuth
-    externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}'
-    login: '{{ .Values.db.user }}'
-    password: '{{ .Values.db.password }}'
-
-# Application configuration
-# dummy value db user pasword to pass lint!!!
-db:
-  user: dummy-clds
-  password: dummy-sidnnd83K
-  databaseName: dummy-cldsdb4
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 30
-  periodSeconds: 10
-  timeoutSeconds: 3
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 30
-  periodSeconds: 10
-  timeoutSeconds: 3
-
-## Persist data to a persitent volume
-persistence:
-  enabled: true
-
-  ## A manually managed Persistent Volume and Claim
-  ## Requires persistence.enabled: true
-  ## If defined, PVC must be created manually before volume will be bound
-  # existingClaim:
-  volumeReclaimPolicy: Retain
-
-  ## database data Persistent Volume Storage Class
-  ## If defined, storageClassName: <storageClass>
-  ## If set to "-", storageClassName: "", which disables dynamic provisioning
-  ## If undefined (the default) or set to null, no storageClassName spec is
-  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-  ##   GKE, AWS & OpenStack)
-  ##
-  # storageClass: "-"
-  accessMode: ReadWriteOnce
-  size: 2Gi
-  mountPath: /dockerdata-nfs
-  mountSubPath: clamp/mariadb/data
-
-service:
-  type: ClusterIP
-  name: clampdb
-  portName: clampdb
-  internalPort: 3306
-  externalPort: 3306
-
-
-ingress:
-  enabled: false
-
-
-#resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 500Mi
-    requests:
-      cpu: 10m
-      memory: 200Mi
-  large:
-    limits:
-      cpu: 1
-      memory: 500Mi
-    requests:
-      cpu: 10m
-      memory: 200Mi
-  unlimited: {}