[CLAMP] AAF certificate using certinializer

use of auto-generated certificates via AAF side-car
at OOM deployment time for CLAMP.

Issue-ID: CLAMP-884

Change-Id: I24f5a119714a5e46c4d0c152c03b6bc545135b8e
Signed-off-by: osgn422w <gervais-martial.ngueko@intl.att.com>
Signed-off-by: ChrisC <christophe.closset@intl.att.com>

14 files changed, 1194 insertions, 0 deletions

diff --git a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml
new file mode 100644
index 0000000000..91984c1014
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: MariaDB Service
+name: clamp-mariadb
+version: 6.0.0
diff --git a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt
new file mode 100644
index 0000000000..1103affff1
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml
new file mode 100644
index 0000000000..9b96d0cfc4
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2020 Samsung Electronics
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~6.x-0
+    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh
new file mode 100755
index 0000000000..71f32e2eff
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh
@@ -0,0 +1,198 @@
+#!/bin/bash
+set -eo pipefail
+shopt -s nullglob
+
+# if command starts with an option, prepend mysqld
+if [ "${1:0:1}" = '-' ]; then
+	set -- mysqld "$@"
+fi
+
+# skip setup if they want an option that stops mysqld
+wantHelp=
+for arg; do
+	case "$arg" in
+		-'?'|--help|--print-defaults|-V|--version)
+			wantHelp=1
+			break
+			;;
+	esac
+done
+
+prepare_password()
+{
+	echo "$1" | sed -e "s/'/\\\\'/g; s/\"/\\\\\"/g"
+}
+
+# usage: file_env VAR [DEFAULT]
+#    ie: file_env 'XYZ_DB_PASSWORD' 'example'
+# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of
+#  "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature)
+file_env() {
+	local var="$1"
+	local fileVar="${var}_FILE"
+	local def="${2:-}"
+	if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then
+		echo >&2 "error: both $var and $fileVar are set (but are exclusive)"
+		exit 1
+	fi
+	local val="$def"
+	if [ "${!var:-}" ]; then
+		val="${!var}"
+	elif [ "${!fileVar:-}" ]; then
+		val="$(< "${!fileVar}")"
+	fi
+	val=`prepare_password $val`
+	export "$var"="$val"
+	unset "$fileVar"
+}
+
+_check_config() {
+	toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" )
+	if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then
+		cat >&2 <<-EOM
+
+			ERROR: mysqld failed while attempting to check config
+			command was: "${toRun[*]}"
+
+			$errors
+		EOM
+		exit 1
+	fi
+}
+
+# Fetch value from server config
+# We use mysqld --verbose --help instead of my_print_defaults because the
+# latter only show values present in config files, and not server defaults
+_get_config() {
+	local conf="$1"; shift
+	"$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \
+		| awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }'
+	# match "datadir      /some/path with/spaces in/it here" but not "--xyz=abc\n     datadir (xyz)"
+}
+
+# allow the container to be started with `--user`
+if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then
+	_check_config "$@"
+	DATADIR="$(_get_config 'datadir' "$@")"
+	mkdir -p "$DATADIR"
+	find "$DATADIR" \! -user mysql -exec chown mysql '{}' +
+	exec gosu mysql "$BASH_SOURCE" "$@"
+fi
+
+if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then
+	# still need to check config, container may have started with --user
+	_check_config "$@"
+	# Get config
+	DATADIR="$(_get_config 'datadir' "$@")"
+
+	if [ ! -d "$DATADIR/mysql" ]; then
+		file_env 'MYSQL_ROOT_PASSWORD'
+		if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then
+			echo >&2 'error: database is uninitialized and password option is not specified '
+			echo >&2 '  You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD'
+			exit 1
+		fi
+
+		mkdir -p "$DATADIR"
+
+		echo 'Initializing database'
+		# "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here)
+		mysql_install_db --datadir="$DATADIR" --rpm "${@:2}"
+		echo 'Database initialized'
+
+		SOCKET="$(_get_config 'socket' "$@")"
+		"$@" --skip-networking --socket="${SOCKET}" &
+		pid="$!"
+
+		mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" )
+
+		for i in {30..0}; do
+			if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then
+				break
+			fi
+			echo 'MySQL init process in progress...'
+			sleep 1
+		done
+		if [ "$i" = 0 ]; then
+			echo >&2 'MySQL init process failed.'
+			exit 1
+		fi
+
+		if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then
+			# sed is for https://bugs.mysql.com/bug.php?id=20545
+			mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql
+		fi
+
+		if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then
+			export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)"
+			echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD"
+		fi
+
+		rootCreate=
+		# default root to listen for connections from anywhere
+		file_env 'MYSQL_ROOT_HOST' '%'
+		if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then
+			# no, we don't care if read finds a terminating character in this heredoc
+			# https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151
+			read -r -d '' rootCreate <<-EOSQL || true
+				CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ;
+				GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ;
+			EOSQL
+		fi
+
+		"${mysql[@]}" <<-EOSQL
+			-- What's done in this file shouldn't be replicated
+			--  or products like mysql-fabric won't work
+			SET @@SESSION.SQL_LOG_BIN=0;
+
+			DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ;
+			SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ;
+			GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ;
+			${rootCreate}
+			DROP DATABASE IF EXISTS test ;
+			FLUSH PRIVILEGES ;
+		EOSQL
+
+		if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then
+			mysql+=( -p"${MYSQL_ROOT_PASSWORD}" )
+		fi
+
+		file_env 'MYSQL_DATABASE'
+		if [ "$MYSQL_DATABASE" ]; then
+			echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}"
+			mysql+=( "$MYSQL_DATABASE" )
+		fi
+
+		file_env 'MYSQL_USER'
+		file_env 'MYSQL_PASSWORD'
+		if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then
+			echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}"
+
+			if [ "$MYSQL_DATABASE" ]; then
+				echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}"
+			fi
+		fi
+
+		echo
+		for f in /docker-entrypoint-initdb.d/*; do
+			case "$f" in
+				*.sh)     echo "$0: running $f"; . "$f" ;;
+				*.sql)    echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;;
+				*.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;;
+				*)        echo "$0: ignoring $f" ;;
+			esac
+			echo
+		done
+
+		if ! kill -s TERM "$pid" || ! wait "$pid"; then
+			echo >&2 'MySQL init process failed.'
+			exit 1
+		fi
+
+		echo
+		echo 'MySQL init process done. Ready for start up.'
+		echo
+	fi
+fi
+
+exec "$@"
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
new file mode 100644
index 0000000000..612590cc6b
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
@@ -0,0 +1,207 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# Example MySQL config file for medium systems.
+#
+# This is for a system with memory 8G where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+##[client]
+##user            = root
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+##performance_schema
+
+slow_query_log =ON
+long_query_time =2
+slow_query_log_file =//var/lib/mysql/slow_query.log
+##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
+##datadir         = //opt/app/mysql/data
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+skip-external-locking
+explicit_defaults_for_timestamp = true
+skip-symbolic-links
+local-infile = 0
+#ignore_db_dir=lost+found
+key_buffer_size = 16M
+max_allowed_packet = 4M
+table_open_cache = 100
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+max_connections = 500
+lower_case_table_names = 1
+thread_stack = 256K
+thread_cache_size = 25
+query_cache_size = 8M
+query_cache_type = 0
+query_prealloc_size = 512K
+query_cache_limit = 1M
+
+# Password validation
+##plugin-load-add=simple_password_check.so
+##simple_password_check_other_characters=0
+
+# Audit Log settings
+plugin-load-add=server_audit.so
+server_audit=FORCE_PLUS_PERMANENT
+server_audit_file_path=//var/lib/mysql/audit.log
+server_audit_file_rotate_size=50M
+server_audit_events=CONNECT,QUERY,TABLE
+server_audit_logging=on
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+#
+#skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+##log-bin=//var/lib/mysql/mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=row
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+##innodb_data_home_dir = //opt/app/mysql/data
+##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
+##innodb_log_group_home_dir = //opt/app/mysql/iblogs
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+innodb_buffer_pool_size = 128M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 10M
+innodb_log_files_in_group = 3
+innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_autoextend_increment = 100
+expire_logs_days = 8
+open_files_limit = 2000
+transaction-isolation=READ-COMMITTED
+####### Galera parameters #######
+## Galera Provider configuration
+wsrep_provider=/usr/lib/galera/libgalera_smm.so
+wsrep_provider_options="gcache.size=128M; gcache.page_size=10M"
+## Galera Cluster configuration
+wsrep_cluster_name="MSO-automated-tests-cluster"
+wsrep_cluster_address="gcomm://"
+#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
+##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
+## Galera Synchronization configuration
+wsrep_sst_method=rsync
+#wsrep_sst_method=xtrabackup-v2
+#wsrep_sst_auth="sstuser:Mon#2o!6"
+## Galera Node configuration
+wsrep_node_name="mariadb1"
+##wsrep_node_address="192.169.3.184"
+wsrep_on=OFF
+## Status notification
+#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
+#######
+
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20971520
+
+##[mysqlhotcopy]
+##interactive-timeout
+##[mysqld_safe]
+##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
+##log-error=//opt/app/mysql/log/mysqld.log
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql
new file mode 100644
index 0000000000..1f153bce04
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql
@@ -0,0 +1,257 @@
+
+    create table dictionary (
+       name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        dictionary_second_level integer,
+        dictionary_type varchar(255),
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table dictionary_elements (
+       short_name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        description varchar(255) not null,
+        name varchar(255) not null,
+        subdictionary_name varchar(255),
+        type varchar(255) not null,
+        primary key (short_name)
+    ) engine=InnoDB;
+
+    create table dictionary_to_dictionaryelements (
+       dictionary_name varchar(255) not null,
+        dictionary_element_short_name varchar(255) not null,
+        primary key (dictionary_name, dictionary_element_short_name)
+    ) engine=InnoDB;
+
+    create table hibernate_sequence (
+       next_val bigint
+    ) engine=InnoDB;
+
+    insert into hibernate_sequence values ( 1 );
+
+    create table loop_element_models (
+       name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        blueprint_yaml MEDIUMTEXT,
+        dcae_blueprint_id varchar(255),
+        loop_element_type varchar(255) not null,
+        short_name varchar(255),
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table loop_logs (
+       id bigint not null,
+        log_component varchar(255) not null,
+        log_instant datetime(6) not null,
+        log_type varchar(255) not null,
+        message MEDIUMTEXT not null,
+        loop_id varchar(255) not null,
+        primary key (id)
+    ) engine=InnoDB;
+
+    create table loop_templates (
+       name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        allowed_loop_type varchar(255),
+        blueprint_yaml MEDIUMTEXT,
+        dcae_blueprint_id varchar(255),
+        maximum_instances_allowed integer,
+        svg_representation MEDIUMTEXT,
+        unique_blueprint boolean default false,
+        service_uuid varchar(255),
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table loopelementmodels_to_policymodels (
+       loop_element_name varchar(255) not null,
+        policy_model_type varchar(255) not null,
+        policy_model_version varchar(255) not null,
+        primary key (loop_element_name, policy_model_type, policy_model_version)
+    ) engine=InnoDB;
+
+    create table loops (
+       name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        dcae_deployment_id varchar(255),
+        dcae_deployment_status_url varchar(255),
+        global_properties_json json,
+        last_computed_state varchar(255) not null,
+        svg_representation MEDIUMTEXT,
+        loop_template_name varchar(255) not null,
+        service_uuid varchar(255),
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table loops_to_microservicepolicies (
+       loop_name varchar(255) not null,
+        microservicepolicy_name varchar(255) not null,
+        primary key (loop_name, microservicepolicy_name)
+    ) engine=InnoDB;
+
+    create table looptemplates_to_loopelementmodels (
+       loop_element_model_name varchar(255) not null,
+        loop_template_name varchar(255) not null,
+        flow_order integer not null,
+        primary key (loop_element_model_name, loop_template_name)
+    ) engine=InnoDB;
+
+    create table micro_service_policies (
+       name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        configurations_json json,
+        json_representation json not null,
+        pdp_group varchar(255),
+        pdp_sub_group varchar(255),
+        context varchar(255),
+        dcae_blueprint_id varchar(255),
+        dcae_deployment_id varchar(255),
+        dcae_deployment_status_url varchar(255),
+        device_type_scope varchar(255),
+        shared bit not null,
+        loop_element_model_id varchar(255),
+        policy_model_type varchar(255),
+        policy_model_version varchar(255),
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table operational_policies (
+       name varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        configurations_json json,
+        json_representation json not null,
+        pdp_group varchar(255),
+        pdp_sub_group varchar(255),
+        loop_element_model_id varchar(255),
+        policy_model_type varchar(255),
+        policy_model_version varchar(255),
+        loop_id varchar(255) not null,
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table policy_models (
+       policy_model_type varchar(255) not null,
+        version varchar(255) not null,
+        created_by varchar(255),
+        created_timestamp datetime(6) not null,
+        updated_by varchar(255),
+        updated_timestamp datetime(6) not null,
+        policy_acronym varchar(255),
+        policy_tosca MEDIUMTEXT,
+        policy_pdp_group json,
+        primary key (policy_model_type, version)
+    ) engine=InnoDB;
+
+    create table services (
+       service_uuid varchar(255) not null,
+        name varchar(255) not null,
+        resource_details json,
+        service_details json,
+        version varchar(255),
+        primary key (service_uuid)
+    ) engine=InnoDB;
+
+    alter table dictionary_to_dictionaryelements
+       add constraint FK68hjjinnm8nte2owstd0xwp23
+       foreign key (dictionary_element_short_name)
+       references dictionary_elements (short_name);
+
+    alter table dictionary_to_dictionaryelements
+       add constraint FKtqfxg46gsxwlm2gkl6ne3cxfe
+       foreign key (dictionary_name)
+       references dictionary (name);
+
+    alter table loop_logs
+       add constraint FK1j0cda46aickcaoxqoo34khg2
+       foreign key (loop_id)
+       references loops (name);
+
+    alter table loop_templates
+       add constraint FKn692dk6281wvp1o95074uacn6
+       foreign key (service_uuid)
+       references services (service_uuid);
+
+    alter table loopelementmodels_to_policymodels
+       add constraint FK23j2q74v6kaexefy0tdabsnda
+       foreign key (policy_model_type, policy_model_version)
+       references policy_models (policy_model_type, version);
+
+    alter table loopelementmodels_to_policymodels
+       add constraint FKjag1iu0olojfwryfkvb5o0rk5
+       foreign key (loop_element_name)
+       references loop_element_models (name);
+
+    alter table loops
+       add constraint FK844uwy82wt0l66jljkjqembpj
+       foreign key (loop_template_name)
+       references loop_templates (name);
+
+    alter table loops
+       add constraint FK4b9wnqopxogwek014i1shqw7w
+       foreign key (service_uuid)
+       references services (service_uuid);
+
+    alter table loops_to_microservicepolicies
+       add constraint FKle255jmi7b065fwbvmwbiehtb
+       foreign key (microservicepolicy_name)
+       references micro_service_policies (name);
+
+    alter table loops_to_microservicepolicies
+       add constraint FK8avfqaf7xl71l7sn7a5eri68d
+       foreign key (loop_name)
+       references loops (name);
+
+    alter table looptemplates_to_loopelementmodels
+       add constraint FK1k7nbrbugvqa0xfxkq3cj1yn9
+       foreign key (loop_element_model_name)
+       references loop_element_models (name);
+
+    alter table looptemplates_to_loopelementmodels
+       add constraint FKj29yxyw0x7ue6mwgi6d3qg748
+       foreign key (loop_template_name)
+       references loop_templates (name);
+
+    alter table micro_service_policies
+       add constraint FKqvvdypacbww07fuv8xvlvdjgl
+       foreign key (loop_element_model_id)
+       references loop_element_models (name);
+
+    alter table micro_service_policies
+       add constraint FKn17j9ufmyhqicb6cvr1dbjvkt
+       foreign key (policy_model_type, policy_model_version)
+       references policy_models (policy_model_type, version);
+
+    alter table operational_policies
+       add constraint FKi9kh7my40737xeuaye9xwbnko
+       foreign key (loop_element_model_id)
+       references loop_element_models (name);
+
+    alter table operational_policies
+       add constraint FKlsyhfkoqvkwj78ofepxhoctip
+       foreign key (policy_model_type, policy_model_version)
+       references policy_models (policy_model_type, version);
+
+    alter table operational_policies
+       add constraint FK1ddoggk9ni2bnqighv6ecmuwu
+       foreign key (loop_id)
+       references loops (name);
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt
new file mode 100644
index 0000000000..1103affff1
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml
new file mode 100644
index 0000000000..01420aa97b
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml
@@ -0,0 +1,55 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#{{ if not .Values.disableClampClampMariadb }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: clamp-entrypoint-bulkload-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: clamp-mariadb-conf-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/init/*").AsConfig . | indent 2 }}
+#{{ end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml
new file mode 100644
index 0000000000..7d6e162813
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml
@@ -0,0 +1,111 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      app: {{ include "common.name" . }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ include "common.release" . }}
+    spec:
+      containers:
+        - name: {{ include "common.name" .  }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          - name: MYSQL_USER
+            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }}
+          - name: MYSQL_PASSWORD
+            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }}
+          - name: MYSQL_ROOT_PASSWORD
+            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 12 }}
+          - name: MYSQL_DATABASE
+            value: {{ tpl .Values.db.databaseName .}}
+          volumeMounts:
+          - mountPath: /docker-entrypoint.sh
+            subPath: docker-entrypoint.sh
+            name: init-script
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /docker-entrypoint-initdb.d/
+            name: docker-entrypoint-bulkload
+          - mountPath: /etc/mysql/conf.d/conf1/
+            name:  clamp-mariadb-conf
+          - mountPath: /var/lib/mysql
+            name: clamp-mariadb-data
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+      {{- if .Values.persistence.enabled }}
+        - name: clamp-mariadb-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+      {{- else }}
+          emptyDir: {}
+      {{- end }}
+        - name: docker-entrypoint-bulkload
+          configMap:
+            name: clamp-entrypoint-bulkload-configmap
+        - name: clamp-mariadb-conf
+          configMap:
+            name: clamp-mariadb-conf-configmap
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: init-script
+          configMap:
+            name: {{ include "common.fullname" . }}
+            defaultMode: 0755
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml
new file mode 100644
index 0000000000..424987936d
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml
@@ -0,0 +1,41 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+{{- if eq "True" (include "common.needPV" .) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}-data
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ include "common.release" . }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  storageClassName: "{{ include "common.fullname" . }}-data"
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
+{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml
new file mode 100644
index 0000000000..6856c80540
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml
@@ -0,0 +1,40 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ include "common.release" . }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+  storageClassName: {{ include "common.storageClass" . }}
+{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml
new file mode 100644
index 0000000000..57f88ce32d
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml
@@ -0,0 +1,16 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{{ include "common.secretFast" . }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml
new file mode 100644
index 0000000000..2533c26161
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+    {{- end}}
+      name: {{ .Values.service.portName }}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/values.yaml b/kubernetes/clamp/components/clamp-mariadb/values.yaml
new file mode 100644
index 0000000000..492145ae07
--- /dev/null
+++ b/kubernetes/clamp/components/clamp-mariadb/values.yaml
@@ -0,0 +1,129 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018-2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+  nodePortPrefix: 302
+
+  persistence: {}
+# application image
+repository: docker.io
+image: mariadb:10.5.4
+pullPolicy: Always
+flavor: small
+#################################################################
+# Secrets metaconfig
+#################################################################
+secrets:
+  - uid: db-root-pass
+    type: password
+    externalSecret: '{{ tpl (default "" .Values.db.rootCredsExternalSecret) . }}'
+    password: '{{ .Values.db.rootPass }}'
+  - uid: db-secret
+    type: basicAuth
+    externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}'
+    login: '{{ .Values.db.user }}'
+    password: '{{ .Values.db.password }}'
+
+# Application configuration
+# dummy value db user pasword to pass lint!!!
+db:
+  user: dummy-clds
+  password: dummy-sidnnd83K
+  databaseName: dummy-cldsdb4
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+
+  ## A manually managed Persistent Volume and Claim
+  ## Requires persistence.enabled: true
+  ## If defined, PVC must be created manually before volume will be bound
+  # existingClaim:
+  volumeReclaimPolicy: Retain
+
+  ## database data Persistent Volume Storage Class
+  ## If defined, storageClassName: <storageClass>
+  ## If set to "-", storageClassName: "", which disables dynamic provisioning
+  ## If undefined (the default) or set to null, no storageClassName spec is
+  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+  ##   GKE, AWS & OpenStack)
+  ##
+  # storageClass: "-"
+  accessMode: ReadWriteOnce
+  size: 2Gi
+  mountPath: /dockerdata-nfs
+  mountSubPath: clamp/mariadb/data
+
+service:
+  type: ClusterIP
+  name: clampdb
+  portName: clampdb
+  internalPort: 3306
+  externalPort: 3306
+
+
+ingress:
+  enabled: false
+
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 200Mi
+  unlimited: {}