Add clamp dashboard charts

Change-Id: I851750c2c394fad4c5187e2a18cfa0460a16c729
Issue-ID: CLAMP-154
Signed-off-by: ac2550 <ac2550@intl.att.com>

9 files changed, 548 insertions, 0 deletions

diff --git a/kubernetes/clamp/charts/clamp-dash-es/Chart.yaml b/kubernetes/clamp/charts/clamp-dash-es/Chart.yaml
new file mode 100644
index 0000000000..e18fb77e13
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/Chart.yaml
@@ -0,0 +1,20 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Elasticsearch
+name: clamp-dash-es
+version: 2.0.0
diff --git a/kubernetes/clamp/charts/clamp-dash-es/requirements.yaml b/kubernetes/clamp/charts/clamp-dash-es/requirements.yaml
new file mode 100644
index 0000000000..2202d75b88
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/requirements.yaml
@@ -0,0 +1,20 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+dependencies:
+  - name: common
+    version: ~2.0.0
+    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml b/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml
new file mode 100644
index 0000000000..d631f44f34
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/resources/config/elasticsearch.yml
@@ -0,0 +1,134 @@
+# ======================== Elasticsearch Configuration =========================
+#
+# NOTE: Elasticsearch comes with reasonable defaults for most settings.
+#       Before you set out to tweak and tune the configuration, make sure you
+#       understand what are you trying to accomplish and the consequences.
+#
+# The primary way of configuring a node is via this file. This template lists
+# the most important settings you may want to configure for a production cluster.
+#
+# Please consult the documentation for further information on configuration options:
+# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
+#
+# ---------------------------------- Cluster -----------------------------------
+#
+# Name of the Elasticsearch cluster.
+# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
+# The default name is elasticsearch, but you should change it to an appropriate name which describes the
+# purpose of the cluster.
+#
+cluster.name: "clamp-dashboard"
+#
+# The port that other nodes in the cluster should use when communicating with this node.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_port:$transport.publish_port
+#
+# The host address to publish for nodes in the cluster to connect to.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_host:$transport.publish_host
+#
+# ------------------------------------ Node ------------------------------------
+#
+# It is better to provide different meaningfull names fot different elastic nodes.
+# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id.
+# Note that the node id is persisted and does not change when a node restarts
+#
+#node.name: $node.name
+#
+# Add custom attributes to the node:
+#
+#node.attr.rack: r1
+#
+# ----------------------------------- Paths ------------------------------------
+#
+# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
+# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
+# may change & can deal to data loss.
+path.data: /usr/share/elasticsearch/data
+#
+# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
+# as on upgrading Elasticsearch, directory structure may change.
+path.logs: /usr/share/elasticsearch/logs
+#
+# ----------------------------------- Memory -----------------------------------
+#
+# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
+# Lock the memory on startup.
+#
+bootstrap.memory_lock: false
+#
+# Make sure that the heap size is set to about half the memory available
+# on the system and that the owner of the process is allowed to use this
+# limit.
+#
+# Elasticsearch performs poorly when the system is swapping the memory.
+#
+# ---------------------------------- Network -----------------------------------
+#
+# Set the bind address to a specific IP (IPv4 or IPv6):
+# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
+# non-loopback address.
+network.host: 0.0.0.0
+#
+# Set a custom port for HTTP: If required, default is 9200-9300
+#
+#http.port: $http.port
+#
+# For more information, consult the network module documentation.
+#
+# --------------------------------- Discovery ----------------------------------
+#
+# Pass an initial list of hosts to perform discovery when new node is started
+# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
+# that are likely to be live and contactable.
+# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
+# to connect to other nodes running on the same server.
+#
+#discovery.zen.ping.unicast.hosts: ["elasticsearch.{{.Values.nsPrefix}}"
+#$discovery.zen.ping.unicast.hosts
+#
+# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes
+# available. Only then will an election take place.
+# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
+discovery.zen.minimum_master_nodes: 1
+#
+# For more information, consult the zen discovery module documentation.
+#
+# ---------------------------------- Gateway -----------------------------------
+#
+# Block initial recovery after a full cluster restart until N nodes are started:
+#
+#gateway.recover_after_nodes: 3
+#
+# For more information, consult the gateway module documentation.
+#
+# ---------------------------------- Various -----------------------------------
+#
+# Require explicit names when deleting indices:
+#
+#action.destructive_requires_name: true
+# Set a custom port for HTTP: If required, default is 9200-9300
+# This is used for REST APIs
+http.port: {{.Values.service.externalPort}}
+# Port to bind for communication between nodes. Accepts a single value or a range.
+# If a range is specified, the node will bind to the first available port in the range.
+# Defaults to 9300-9400.
+# More info:
+transport.tcp.port: {{.Values.service.externalPort2}}
+
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/configmap.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/configmap.yaml
new file mode 100644
index 0000000000..f41a7c2f87
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/templates/configmap.yaml
@@ -0,0 +1,23 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml
new file mode 100644
index 0000000000..b740091108
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/templates/deployment.yaml
@@ -0,0 +1,120 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /bin/sh
+        - -c
+        - |
+          sysctl -w vm.max_map_count=262144
+          mkdir -p /usr/share/elasticsearch/logs
+          mkdir -p /usr/share/elasticsearch/data
+          chmod -R 777 /usr/share/elasticsearch
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        securityContext:
+          privileged: true
+        image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: init-sysctl
+        volumeMounts:
+        - name: {{ include "common.fullname" . }}-logs
+          mountPath: /usr/share/elasticsearch/logs/
+        - name: {{ include "common.fullname" . }}-data
+          mountPath: /usr/share/elasticsearch/data/
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ include "common.servicename" . }}
+          - containerPort: {{ .Values.service.internalPort2 }}
+            name: {{ include "common.servicename" . }}2
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort2 }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+            name: {{ include "common.fullname" . }}-config
+            subPath: elasticsearch.yml
+          - mountPath: /usr/share/elasticsearch/data/
+            name: {{ include "common.fullname" . }}-data
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: elasticsearch.yml
+              path: elasticsearch.yml
+        - name: {{ include "common.fullname" . }}-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+        - name: {{ include "common.fullname" . }}-logs
+          hostPath:
+            path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPathLogs }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/pv.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/pv.yaml
new file mode 100644
index 0000000000..31230a9ed7
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/templates/pv.yaml
@@ -0,0 +1,21 @@
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/pvc.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/pvc.yaml
new file mode 100644
index 0000000000..c046f4604a
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/templates/pvc.yaml
@@ -0,0 +1,25 @@
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+  selector:
+    matchLabels:
+      name: {{ include "common.fullname" . }}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+{{- end -}}
diff --git a/kubernetes/clamp/charts/clamp-dash-es/templates/service.yaml b/kubernetes/clamp/charts/clamp-dash-es/templates/service.yaml
new file mode 100644
index 0000000000..2da42854bc
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/templates/service.yaml
@@ -0,0 +1,69 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.config.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.config.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}-tcp
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type2 }}
+  ports:
+    {{if eq .Values.service.type2 "NodePort" -}}
+    - port: {{ .Values.service.externalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.config.portName2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.config.portName2 }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/clamp/charts/clamp-dash-es/values.yaml b/kubernetes/clamp/charts/clamp-dash-es/values.yaml
new file mode 100644
index 0000000000..83fb73e9a8
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-dash-es/values.yaml
@@ -0,0 +1,116 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2018 AT&T Intellectual Property
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+loggingRepository: docker.elastic.co
+image: elasticsearch/elasticsearch:5.6.8
+pullPolicy: IfNotPresent
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+
+  ## A manually managed Persistent Volume and Claim
+  ## Requires persistence.enabled: true
+  ## If defined, PVC must be created manually before volume will be bound
+  # existingClaim:
+  volumeReclaimPolicy: Retain
+
+  ## database data Persistent Volume Storage Class
+  ## If defined, storageClassName: <storageClass>
+  ## If set to "-", storageClassName: "", which disables dynamic provisioning
+  ## If undefined (the default) or set to null, no storageClassName spec is
+  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+  ##   GKE, AWS & OpenStack)
+  accessMode: ReadWriteMany
+  size: 4Gi
+  mountPath: /dockerdata-nfs
+  mountSubPath: clamp/dashboard-elasticsearch/data
+
+service:
+  type: ClusterIP
+  name: cdash-es
+  portName: cdash-es-rest
+  externalPort: 9200
+  internalPort: 9200
+  type2: ClusterIP
+  portName2: cdash-es-tcp
+  externalPort2: 9300
+  internalPort2: 9300
+
+ingress:
+  enabled: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+#  limits:
+#    cpu: 2
+#    memory: 4Gi
+#  requests:
+#    cpu: 2
+#    memory: 4Gi