Add CDS as new chart

CDS (Common Design Studio) was put in common but with the arrival of a
chart that hosts the UI, it seems better to have it into its own "root"
chart.

For now, CDS chart is being installed if it's set as enabled in SDNC.

Change-Id: I73bdcfaeb29b796793374513e152244a41e82d52
Issue-ID: CCSDK-1015
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>

19 files changed, 950 insertions, 0 deletions

diff --git a/kubernetes/cds/charts/blueprints-processor/Chart.yaml b/kubernetes/cds/charts/blueprints-processor/Chart.yaml
new file mode 100755
index 0000000000..389097437c
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Blueprints Processor Micro Service
+name: blueprints-processor
+version: 4.0.0
\ No newline at end of file
diff --git a/kubernetes/cds/charts/blueprints-processor/requirements.yaml b/kubernetes/cds/charts/blueprints-processor/requirements.yaml
new file mode 100755
index 0000000000..1d06a389a8
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/requirements.yaml
@@ -0,0 +1,21 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: mariadb-galera
+    version: ~4.x-0
+    repository: file://../mariadb-galera/
+  - name: common
+    version: ~4.x-0
+    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/cds/charts/blueprints-processor/resources/config/application.properties b/kubernetes/cds/charts/blueprints-processor/resources/config/application.properties
new file mode 100755
index 0000000000..9d1c957b8f
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/resources/config/application.properties
@@ -0,0 +1,34 @@
+#  Copyright (c) 2019 IBM, Bell Canada.

+#

+#  Licensed under the Apache License, Version 2.0 (the "License");

+#  you may not use this file except in compliance with the License.

+#  You may obtain a copy of the License at

+#

+#      http://www.apache.org/licenses/LICENSE-2.0

+#

+#  Unless required by applicable law or agreed to in writing, software

+#  distributed under the License is distributed on an "AS IS" BASIS,

+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+#  See the License for the specific language governing permissions and

+#  limitations under the License.

+#logging.level.web=DEBUG

+appName={{.Values.config.applicationName}}

+ms_name={{.Values.config.msName}}

+appVersion={{.Values.config.bundleVersion}}

+blueprintsprocessor.grpcEnable={{.Values.config.grpcEnabled}}

+blueprintsprocessor.httpPort={{.Values.service.http.internalPort}}

+blueprintsprocessor.grpcPort={{.Values.service.grpc.internalPort}}

+#Blueprint Processor File Execution and Handling Properties

+blueprintsprocessor.blueprintDeployPath=/opt/app/onap/blueprints/deploy

+blueprintsprocessor.blueprintArchivePath=/opt/app/onap/blueprints/archive

+#Primary Database Configuration

+blueprintsprocessor.db.primary.url=jdbc:mysql://blueprints-processor-db:3306/sdnctl

+blueprintsprocessor.db.primary.username=sdnctl

+blueprintsprocessor.db.primary.password=sdnctl

+blueprintsprocessor.db.primary.driverClassName=org.mariadb.jdbc.Driver

+blueprintsprocessor.db.primary.hibernateHbm2ddlAuto=update

+blueprintsprocessor.db.primary.hibernateDDLAuto=update

+blueprintsprocessor.db.primary.hibernateNamingStrategy=org.hibernate.cfg.ImprovedNamingStrategy

+blueprintsprocessor.db.primary.hibernateDialect=org.hibernate.dialect.MySQL5InnoDBDialect

+# Web server config

+server.port=8080
\ No newline at end of file
diff --git a/kubernetes/cds/charts/blueprints-processor/resources/config/logback.xml b/kubernetes/cds/charts/blueprints-processor/resources/config/logback.xml
new file mode 100755
index 0000000000..b73db7145f
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/resources/config/logback.xml
@@ -0,0 +1,44 @@
+<!--
+  ~ Copyright (c) 2017-2018 AT&T Intellectual Property.
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~     http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<configuration>
+
+    <property name="localPattern" value="%d{HH:mm:ss.SSS} %-5level %logger{100} - %msg%n" />
+
+    <property name="defaultPattern" value="%date{ISO8601,UTC}|%X{RequestID}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}| %msg%n" />
+
+    <property name="debugLoggerPattern" value="%date{ISO8601,UTC}|%X{RequestID}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}|[%caller{3}]| %msg%n" />
+
+    <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+        <!-- encoders are assigned the type
+             ch.qos.logback.classic.encoder.PatternLayoutEncoder by default -->
+        <encoder>
+            <pattern>${defaultPattern}</pattern>
+        </encoder>
+    </appender>
+
+
+    <logger name="org.springframework" level="info"/>
+    <logger name="org.springframework.web" level="info"/>
+    <logger name="org.springframework.security.web.authentication" level="warn"/>
+    <logger name="org.hibernate" level="error"/>
+    <logger name="org.onap.ccsdk.apps" level="info"/>
+
+    <root level="warn">
+        <appender-ref ref="STDOUT"/>
+    </root>
+
+</configuration>
diff --git a/kubernetes/cds/charts/blueprints-processor/templates/configmap.yaml b/kubernetes/cds/charts/blueprints-processor/templates/configmap.yaml
new file mode 100755
index 0000000000..873acee237
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/templates/configmap.yaml
@@ -0,0 +1,21 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/cds/charts/blueprints-processor/templates/deployment.yaml b/kubernetes/cds/charts/blueprints-processor/templates/deployment.yaml
new file mode 100755
index 0000000000..5629913826
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/templates/deployment.yaml
@@ -0,0 +1,109 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - {{ index .Values "mariadb-galera" "nameOverride" }}
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          env:
+          - name: APP_CONFIG_HOME
+            value: {{ .Values.config.appConfigDir }}
+          ports:
+          - containerPort: {{ .Values.service.http.internalPort }}
+          {{ if .Values.config.grpcEnabled }}
+          - containerPort: {{ .Values.service.grpc.internalPort }}
+          {{ end }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{ if .Values.liveness.enabled }}
+          livenessProbe:
+            httpGet:
+              path: /api/v1/execution-service/ping
+              port: {{ .Values.service.http.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end }}
+          readinessProbe:
+            httpGet:
+              path: /api/v1/execution-service/ping
+              port: {{ .Values.service.http.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: {{ .Values.config.appConfigDir }}/application.properties
+            name: {{ include "common.fullname" . }}-config
+            subPath: application.properties
+          - mountPath: {{ .Values.config.appConfigDir }}/logback.xml
+            name: {{ include "common.fullname" . }}-config
+            subPath: logback.xml
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: application.properties
+              path: application.properties
+            - key: logback.xml
+              path: logback.xml
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/cds/charts/blueprints-processor/templates/secrets.yaml b/kubernetes/cds/charts/blueprints-processor/templates/secrets.yaml
new file mode 100755
index 0000000000..f21363d087
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/templates/secrets.yaml
@@ -0,0 +1,27 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.fullname" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+type: Opaque
+data:
+  db-root-password: {{ index .Values "mariadb-galera" "config" "mariadbRootPassword" | b64enc | quote }}
diff --git a/kubernetes/cds/charts/blueprints-processor/templates/service.yaml b/kubernetes/cds/charts/blueprints-processor/templates/service.yaml
new file mode 100755
index 0000000000..4c1c32c1ed
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/templates/service.yaml
@@ -0,0 +1,45 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.http.externalPort }}
+      targetPort: {{ .Values.service.http.internalPort }}
+      {{- if eq .Values.service.type "NodePort"}}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      {{- end}}
+      name: {{ .Values.service.portName | default "http" }}
+    {{- if .Values.config.grpcEnabled}}
+    - port: {{ .Values.service.grpc.externalPort }}
+      targetPort: {{ .Values.service.grpc.internalPort }}
+      {{- if eq .Values.service.type "NodePort"}}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      {{- end}}
+      name: {{ .Values.service.portName | default "http" }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/cds/charts/blueprints-processor/values.yaml b/kubernetes/cds/charts/blueprints-processor/values.yaml
new file mode 100755
index 0000000000..2edcc8a4ec
--- /dev/null
+++ b/kubernetes/cds/charts/blueprints-processor/values.yaml
@@ -0,0 +1,126 @@
+# Copyright (c) 2019 IBM, Bell Canada
+#
+#  Modifications Copyright (c) 2019 Bell Canada.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  # Change to an unused port prefix range to prevent port conflicts
+  # with other instances running within the same k8s cluster
+  nodePortPrefix: 302
+
+  # image repositories
+  repository: nexus3.onap.org:10001
+
+  # readiness check
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+
+  # image pull policy
+  pullPolicy: Always
+
+  persistence:
+    mountPath: /dockerdata-nfs
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/ccsdk-blueprintsprocessor:0.4.1
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  applicationName: BlueprintsProcessor
+  msName: "org.onap.ccsdk.apps.blueprintsprocessor"
+  bundleVersion: "1.0.0"
+  appConfigDir: /opt/app/onap/config
+  grpcEnabled: false
+  stickySelectorKey:
+  envContext: DEV
+
+mariadb-galera:
+  config:
+    userName: sdnctl
+    userPassword: sdnctl
+    mariadbRootPassword: sdnctl
+    mysqlDatabase: sdnctl
+  nameOverride: blueprints-processor-db
+  service:
+    name: blueprints-processor-db
+    portName: bp-db
+  replicaCount: 1
+  persistence:
+    enabled: true
+    mountSubPath: blueprints-processor/data
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  type: ClusterIP
+  portName: blueprints-processor
+  http:
+    internalPort: 8080
+    externalPort: 8080
+  grpc:
+    internalPort: 9111
+    externalPort: 9111
+
+persistence:
+  enabled: true
+
+ingress:
+  enabled: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+#  limits:
+#    cpu: 2
+#    memory: 4Gi
+#  requests:
+#    cpu: 2
+#    memory: 4Gi
diff --git a/kubernetes/cds/charts/controller-blueprints/.helmignore b/kubernetes/cds/charts/controller-blueprints/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/cds/charts/controller-blueprints/Chart.yaml b/kubernetes/cds/charts/controller-blueprints/Chart.yaml
new file mode 100644
index 0000000000..5e8b3f35df
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Controller Blueprints Micro Service
+name: controller-blueprints
+version: 4.0.0
\ No newline at end of file
diff --git a/kubernetes/cds/charts/controller-blueprints/requirements.yaml b/kubernetes/cds/charts/controller-blueprints/requirements.yaml
new file mode 100644
index 0000000000..cefe3d3bdf
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/requirements.yaml
@@ -0,0 +1,21 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: mariadb-galera
+    version: ~4.x-0
+    repository: file://../mariadb-galera/
+  - name: common
+    version: ~4.x-0
+    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/cds/charts/controller-blueprints/resources/config/application.properties b/kubernetes/cds/charts/controller-blueprints/resources/config/application.properties
new file mode 100755
index 0000000000..7eec7f9115
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/resources/config/application.properties
@@ -0,0 +1,72 @@
+# Copyright © 2017-2018 AT&T Intellectual Property.
+# Modifications Copyright © 2018 IBM.
+# Modifications Copyright © 2019 Bell Canada.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+appName=ControllerBluePrints
+ms_name=org.onap.ccsdk.apps.controllerblueprints
+appVersion=1.0.0
+
+# Basic Authentication
+basic-auth.user-name=ccsdkapps
+basic-auth.hashed-pwd={bcrypt}$2a$10$MJxhNiOAffxbyrV9.rrOUewP9Q/ASg5Nit2cmP.yBaXGsVXo8BW3y
+
+logging.level.org.springframework.web=INFO
+logging.level.org.hibernate.SQL=warn
+logging.level.org.hibernate.type.descriptor.sql=debug
+
+#To Remove Null in JSON API Response
+spring.jackson.default-property-inclusion=non_null
+
+#Swagger Configuration
+swagger.contact.name=CCSDK team
+swagger.contact.url=www.onap.org
+swagger.contact.email=onap-discuss@lists.onap.org
+
+spring.jpa.properties.hibernate.show_sql=true
+spring.jpa.properties.hibernate.use_sql_comments=true
+spring.jpa.properties.hibernate.format_sql=true
+
+# spring.datasource.url, spring.datasource.username,spring.datasource.password  may be overridden by ENV variables
+spring.datasource.url=jdbc:mysql://controller-blueprints-db:3306/sdnctl
+spring.datasource.username=sdnctl
+spring.datasource.password=sdnctl
+spring.datasource.driver-class-name=org.mariadb.jdbc.Driver
+spring.jpa.show-sql=true
+spring.jpa.hibernate.ddl-auto=none
+spring.jpa.hibernate.naming-strategy=org.hibernate.cfg.ImprovedNamingStrategy
+spring.jpa.properties.hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect
+
+# Load Resource Source Mappings
+resourceSourceMappings=primary-db=source-primary-db,input=source-input,default=source-default,primary-config-data=source-rest,capability=source-capability
+
+# Controller Blueprints Core Configuration
+controllerblueprints.blueprintDeployPath=/etc/blueprints/deploy
+controllerblueprints.blueprintArchivePath=/etc/blueprints/archive
+controllerblueprints.blueprintEnrichmentPath=/etc/blueprints/enrichment
+# Controller Blueprint Load Configurations
+# blueprints.load.initial-data may be overridden by ENV variables
+controllerblueprints.loadInitialData={{ .Values.config.initDataLoad }}
+controllerblueprints.loadBluePrint=true
+controllerblueprints.loadBluePrintPaths=/opt/app/onap/model-catalog/blueprint-model/service-blueprint
+controllerblueprints.loadModelType=true
+controllerblueprints.loadModeTypePaths=/opt/app/onap/model-catalog/definition-type/starter-type
+controllerblueprints.loadResourceDictionary=true
+controllerblueprints.loadResourceDictionaryPaths=/opt/app/onap/model-catalog/resource-dictionary/starter-dictionary
+
+# CBA file extension
+controllerblueprints.loadCbaExtension=zip
+
+# Web server config
+server.port=8080
\ No newline at end of file
diff --git a/kubernetes/cds/charts/controller-blueprints/resources/config/logback.xml b/kubernetes/cds/charts/controller-blueprints/resources/config/logback.xml
new file mode 100644
index 0000000000..b73db7145f
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/resources/config/logback.xml
@@ -0,0 +1,44 @@
+<!--
+  ~ Copyright (c) 2017-2018 AT&T Intellectual Property.
+  ~
+  ~ Licensed under the Apache License, Version 2.0 (the "License");
+  ~ you may not use this file except in compliance with the License.
+  ~ You may obtain a copy of the License at
+  ~
+  ~     http://www.apache.org/licenses/LICENSE-2.0
+  ~
+  ~ Unless required by applicable law or agreed to in writing, software
+  ~ distributed under the License is distributed on an "AS IS" BASIS,
+  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  ~ See the License for the specific language governing permissions and
+  ~ limitations under the License.
+  -->
+
+<configuration>
+
+    <property name="localPattern" value="%d{HH:mm:ss.SSS} %-5level %logger{100} - %msg%n" />
+
+    <property name="defaultPattern" value="%date{ISO8601,UTC}|%X{RequestID}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}| %msg%n" />
+
+    <property name="debugLoggerPattern" value="%date{ISO8601,UTC}|%X{RequestID}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}|[%caller{3}]| %msg%n" />
+
+    <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+        <!-- encoders are assigned the type
+             ch.qos.logback.classic.encoder.PatternLayoutEncoder by default -->
+        <encoder>
+            <pattern>${defaultPattern}</pattern>
+        </encoder>
+    </appender>
+
+
+    <logger name="org.springframework" level="info"/>
+    <logger name="org.springframework.web" level="info"/>
+    <logger name="org.springframework.security.web.authentication" level="warn"/>
+    <logger name="org.hibernate" level="error"/>
+    <logger name="org.onap.ccsdk.apps" level="info"/>
+
+    <root level="warn">
+        <appender-ref ref="STDOUT"/>
+    </root>
+
+</configuration>
diff --git a/kubernetes/cds/charts/controller-blueprints/templates/configmap.yaml b/kubernetes/cds/charts/controller-blueprints/templates/configmap.yaml
new file mode 100644
index 0000000000..a8489681df
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/templates/configmap.yaml
@@ -0,0 +1,27 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T, ZTE
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/cds/charts/controller-blueprints/templates/deployment.yaml b/kubernetes/cds/charts/controller-blueprints/templates/deployment.yaml
new file mode 100755
index 0000000000..ef8b38fc10
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/templates/deployment.yaml
@@ -0,0 +1,106 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+#
+# Modifications Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - {{ index .Values "mariadb-galera" "nameOverride" }}
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          env:
+            - name: APP_CONFIG_HOME
+              value: {{ .Values.config.appConfigDir }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{ if .Values.liveness.enabled }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end }}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: {{ .Values.config.appConfigDir }}/application.properties
+            name: {{ include "common.fullname" . }}-config
+            subPath: application.properties
+          - mountPath: {{ .Values.config.appConfigDir }}/logback.xml
+            name: {{ include "common.fullname" . }}-config
+            subPath: logback.xml
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: application.properties
+              path: application.properties
+            - key: logback.xml
+              path: logback.xml
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/cds/charts/controller-blueprints/templates/secrets.yaml b/kubernetes/cds/charts/controller-blueprints/templates/secrets.yaml
new file mode 100644
index 0000000000..b4ab161809
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/templates/secrets.yaml
@@ -0,0 +1,29 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.fullname" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+type: Opaque
+data:
+  db-root-password: {{ index .Values "mariadb-galera" "config" "mariadbRootPassword" | b64enc | quote }}
+  restUser: {{ .Values.config.restUser | b64enc | quote }}
+  restPassword: {{ .Values.config.restPassword | b64enc | quote }}
diff --git a/kubernetes/cds/charts/controller-blueprints/templates/service.yaml b/kubernetes/cds/charts/controller-blueprints/templates/service.yaml
new file mode 100755
index 0000000000..e0a66d2483
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/templates/service.yaml
@@ -0,0 +1,50 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+#
+# Modifications Copyright (c) 2019 IBM, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+# Example MSB registration annotation
+#    msb.onap.org/service-info: '[
+#      {
+#          "serviceName": "controller-blueprints",
+#          "version": "v1",
+#          "url": "/ecomp/mso/infra",
+#          "protocol": "REST"
+#          "port": "8080",
+#          "visualRange":"1"
+#      }
+#      ]'
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+  - port: {{ .Values.service.externalPort }}
+    targetPort: {{ .Values.service.internalPort }}
+    {{- if eq .Values.service.type "NodePort"}}
+    nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+    {{- end}}
+    name: {{ .Values.service.portName | default "http" }}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/cds/charts/controller-blueprints/values.yaml b/kubernetes/cds/charts/controller-blueprints/values.yaml
new file mode 100755
index 0000000000..02b5685fa4
--- /dev/null
+++ b/kubernetes/cds/charts/controller-blueprints/values.yaml
@@ -0,0 +1,117 @@
+# Copyright (c) 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  # Change to an unused port prefix range to prevent port conflicts
+  # with other instances running within the same k8s cluster
+  nodePortPrefix: 302
+
+  # image repositories
+  repository: nexus3.onap.org:10001
+
+  # readiness check
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+
+  # image pull policy
+  pullPolicy: Always
+
+  persistence:
+    mountPath: /dockerdata-nfs
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/ccsdk-controllerblueprints:0.4-STAGING-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  appConfigDir: /opt/app/onap/config
+  initDataLoad: true
+  restUser: ccsdkapps
+  restPassword: ccsdkapps
+
+mariadb-galera:
+  config:
+      userName: sdnctl
+      userPassword: sdnctl
+      mariadbRootPassword: sdnctl
+      mysqlDatabase: sdnctl
+  nameOverride: controller-blueprints-db
+  service:
+    name: controller-blueprints-db
+    portName: cb-db
+  replicaCount: 1
+  persistence:
+    enabled: true
+    mountSubPath: controller-blueprints/data
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  type: ClusterIP
+  portName: controller-blueprints
+  internalPort: 8080
+  externalPort: 8080
+
+persistence:
+  enabled: true
+
+ingress:
+  enabled: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+#  limits:
+#    cpu: 2
+#    memory: 4Gi
+#  requests:
+#    cpu: 2
+#    memory: 4Gi