AAI HELM code transfer

- Remove kubernetes/aai code from OOM.
- Add oom/aai as submodule of OOM in kubernetes/aai
location.

Change-Id: I7741a0cd4b0ecef174569c9450b09f2f7c211f44
Issue-ID: CIMAN-250
Signed-off-by: Jessica Wagantall <jwagantall@linuxfoundation.org>

1 files changed, 0 insertions, 376 deletions

diff --git a/kubernetes/aai/values.yaml b/kubernetes/aai/values.yaml
deleted file mode 100644
index b2e17af428..0000000000
--- a/kubernetes/aai/values.yaml
+++ /dev/null
@@ -1,376 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Default values for aai.
-# This is a YAML-formatted file.
-# Declare variables to be passed into your templates.
-global: # global defaults
-  nodePortPrefix: 302
-  repository: nexus3.onap.org:10001
-  dockerhubRepository: docker.io
-  busyboxImage: busybox
-
-  readinessRepository: oomk8s
-  readinessImage: readiness-check:2.0.2
-
-  loggingRepository: docker.elastic.co
-  loggingImage: beats/filebeat:5.5.0
-
-  restartPolicy: Always
-
-  installSidecarSecurity: false
-  aafEnabled: true
-
-  fproxy:
-    name: forward-proxy
-    activeSpringProfiles: noHostVerification,cadi
-    image: onap/fproxy:2.1-STAGING-latest
-    port: 10680
-
-  rproxy:
-    name: reverse-proxy
-    activeSpringProfiles: noHostVerification,cadi
-    image: onap/rproxy:2.1-STAGING-latest
-    port: 10692
-
-  tproxyConfig:
-    name: init-tproxy-config
-    image: onap/tproxy-config:2.1-STAGING-latest
-
-  # AAF server details. Only needed if the AAF DNS does not resolve from the pod
-  aaf:
-    serverIp: 10.12.6.214
-    serverHostname: aaf.osaaf.org
-    serverPort: 30247
-
-  cassandra:
-    #This will instantiate AAI cassandra cluster, default:shared cassandra.
-    localCluster: false
-
-    #Service Name of the cassandra cluster to connect to.
-    #Override it to aai-cassandra if localCluster is enabled.
-    serviceName: cassandra
-
-    #This should be same as shared cassandra instance or if localCluster is enabled 
-    #then it should be same as aai-cassandra replicaCount 
-    replicas: 3
-
-  aai:
-    serviceName: aai
-  babel:
-    serviceName: aai-babel
-  champ:
-    serviceName: aai-champ
-  aaiElasticsearch:
-    serviceName: aai-elasticsearch
-  resources:
-    serviceName: aai-resources
-  sparkyBe:
-    serviceName: aai-sparky-be
-  dataRouter:
-    serviceName: aai-data-router
-  gizmo:
-    serviceName: aai-gizmo
-  modelloader:
-    serviceName: aai-modelloader
-  searchData:
-    serviceName: aai-search-data
-  traversal:
-    serviceName: aai-traversal
-  graphadmin:
-    serviceName: aai-graphadmin
-  spike:
-    serviceName: aai-spike
-
-  initContainers:
-    enabled: true
-  # Specifies a list of jobs to be run
-  jobs:
-    # When enabled, it will create the schema based on oxm and edge rules
-    createSchema:
-      enabled: true
-    # When enabled, it will create the widget models via REST API to haproxy
-    updateQueryData:
-      enabled: true
-    #migration using helm hooks
-    migration:
-      enabled: false
-      remoteCassandra:
-        enabled: false
-        storage:
-          backend: cassandra
-          hostname: 10.10.10.10
-          connectionTimeout: 100000
-          cacheSize: 1000000
-          keyConsistent: true
-
-          #If backend is cql or cassandra it should be keyspace name
-          #else backend is hbase it should be hbase table name
-          name: aaigraph
-
-       ## CQL driver specific properties for janusgraph
-       #  cql:
-       #    #Name of the Cassandra Cluster
-       #    cluster: someclustername
-       #    readConsistency: QUORUM
-       #    writeConsistency: QUORUM
-       #    replicationFactor: 3
-       #    localConsistencyForSysOps: true
-
-       ## Cassandra driver specific properties for janusgraph
-          cassandra:
-            #Name of the Cassandra Cluster
-            clusterName: aai-cluster
-            localDataCenter: Pod lab
-            readConsistency: LOCAL_QUORUM
-            writeConsistency: LOCAL_QUORUM
-            replicationFactor: 3
-
-        #storage:
-        #  backend: cassandra
-        #  hostname: somehost1,somehost2,somehost3
-        #  connectionTimeout: 100000
-        #  cacheSize: 1000000
-        #  clusterName: someClusterName
-        #  localDataCenter: someDataCenter
-        #  keyConsistent: true
-        #  #If backend is cql or cassandra it should be keyspace name
-        #  #else backend is hbase it should be hbase table name
-        #  name: your_hbase_table_or_keyspace_name
-
-        ## CQL driver specific properties for janusgraph
-        #  cql:
-        #    #Name of the Cassandra Cluster
-        #    cluster: someclustername
-        #    readConsistency: QUORUM
-        #    writeConsistency: QUORUM
-        #    replicationFactor: 3
-        #    localConsistencyForSysOps: true
-
-        ## Cassandra driver specific properties for janusgraph
-        #  cassandra:
-        #    #Name of the Cassandra Cluster
-        #    cluster: someclustername
-        #    readConsistency: LOCAL_QUORUM
-        #    writeConsistency: LOCAL_QUORUM
-        #    replicationFactor: 3
-
-
-  # Common configuration for resources traversal and graphadmin
-  config:
-    # User information for the admin user in container
-    userId: 1000
-    groupId: 1000
-
-    # Specifies that the cluster connected to a dynamic
-    # cluster being spinned up by kubernetes deployment
-    cluster:
-      cassandra:
-        dynamic: true
-
-    # If cluster.cassandra.dynamic is set to false
-    # Then the following configuration should be uncommented
-    # This is if you are planning to connect to a existing
-    # Cassandra cluster instead of doing the deployment
-    #storage:
-    #  backend: cassandra
-    #  hostname: somehost1,somehost2,somehost3
-    #  connectionTimeout: 100000
-    #  cacheSize: 1000000
-    #  clusterName: someClusterName
-    #  localDataCenter: someDataCenter
-    #  keyConsistent: true
-    #  # If backend is cql or cassandra it should be keyspace name
-    #  # else backend is hbase it should be hbase table name
-    #  name: your_hbase_table_or_keyspace_name
-
-    #  # CQL driver specific properties for janusgraph
-    #  cql:
-    #    # Name of the Cassandra Cluster
-    #    cluster: someclustername
-    #    readConsistency: QUORUM
-    #    writeConsistency: QUORUM
-    #    replicationFactor: 3
-    #    localConsistencyForSysOps: true
-
-    #  # Cassandra driver specific properties for janusgraph
-    #  cassandra:
-    #    # Name of the Cassandra Cluster
-    #    cluster: someclustername
-    #    readConsistency: LOCAL_QUORUM
-    #    writeConsistency: LOCAL_QUORUM
-    #    replicationFactor: 3
-
-    # Specifies if the basic authorization is enabled
-    basic:
-      auth:
-        enabled: true
-        username: AAI
-        passwd: AAI
-
-    # Active spring profiles for the resources microservice
-    profiles:
-      active: production,dmaap,aaf-auth
-
-    # Notification event specific properties
-    notification:
-      eventType: AAI-EVENT
-      domain: dev
-
-    # Schema specific properties that include supported versions of api
-    schema:
-      # Specifies if the connection should be one way ssl, two way ssl or no auth
-      service:
-        client: one-way-ssl
-      # Specifies which translator to use if it has schema-service, then it will make a rest request to schema service
-      translator:
-        list: schema-service
-      source:
-        # Specifies which folder to take a look at
-        name: onap
-      uri:
-        # Base URI Path of the application
-        base:
-          path: /aai
-      version:
-        # Current version of the REST API
-        api:
-          default: v16
-        # Specifies which version the depth parameter is configurable
-        depth: v11
-        # List of all the supported versions of the API
-        list: v11,v12,v13,v14,v15,v16
-        # Specifies from which version related link should appear
-        related:
-          link: v11
-        # Specifies from which version the app root change happened
-        app:
-          root: v11
-        # Specifies from which version the xml namespace changed
-        namespace:
-          change: v12
-        # Specifies from which version the edge label appeared in API
-        edge:
-          label: v12
-
-    # Keystore configuration password and filename
-    keystore:
-      filename: aai_keystore
-      passwd: OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
-
-    # Truststore configuration password and filename
-    truststore:
-      filename: aai_keystore
-      passwd: OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
-
-    # Specifies a list of files to be included in auth volume
-    auth:
-      files:
-        - aai_keystore
-
-    # Specifies which clients should always default to realtime graph connection
-    realtime:
-      clients: SDNC,MSO,SO,robot-ete
-
-    # Logback debug enabled
-    logback:
-      console:
-        # If enabled, container will print all logback to standard output
-        # This will make debugging much easier but it should only be done
-        # when debugging the issue and changed back as it can affect performance
-        # since when this is enabled, it prints a lot of information to console
-        enabled: false
-
-# application image
-dockerhubRepository: registry.hub.docker.com
-image: aaionap/haproxy:1.4.0
-pullPolicy: Always
-
-flavor: small
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-config:
-  logstashServiceName: log-ls
-  logstashPort: 5044
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-#This section is used when localCluster is enabled. AAI will create its own cassandra cluster for its specific use.
-#Below command will instantiate the aai cassandra instances:
-#helm deploy demo local/onap --version=4.0.0 --namespace onap --set aai.enabled=true \
-#                            --set aai.global.cassandra.localCluster=true \
-#                            --set aai.global.cassandra.serviceName=aai-cassandra
-cassandra:
-  nameOverride: aai-cassandra
-  replicaCount: 3
-  service:
-    name: aai-cassandra
-  persistence:
-    mountSubPath: aai/cassandra
-    enabled: true
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-service:
-  type: NodePort
-  portName: aai
-  externalPort: 8080
-  internalPort: 8080
-  nodePort: 32
-  portName2: aai-ssl
-  externalPort2: 8443
-  internalPort2: 8443
-  nodePort2: 33
-  # POLICY hotfix - Note this must be temporary
-  # See https://jira.onap.org/browse/POLICY-510
-  aaiServiceClusterIp:
-
-ingress:
-  enabled: false
-
-resources:
-  small:
-    limits:
-      cpu: 2
-      memory: 4Gi
-    requests:
-      cpu: 1
-      memory: 1Gi
-  large:
-    limits:
-      cpu: 4
-      memory: 8Gi
-    requests:
-      cpu: 2
-      memory: 2Gi
-  unlimited: {}