Adding GIZMO chart to AAI

Gizmo chart files

Issue-ID: OOM-798
Change-Id: Ic195d2973cfe5d5ace04670d3dcc6b43b820d461
Signed-off-by: Gurjeet Bedi <gurjeetb@amdocs.com>

2 files changed, 254 insertions, 0 deletions

diff --git a/kubernetes/aai/charts/gizmo/resources/config/log/filebeat/filebeat.yml b/kubernetes/aai/charts/gizmo/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..9ad559c027
--- /dev/null
+++ b/kubernetes/aai/charts/gizmo/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,41 @@
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["logstash.{{ .Release.Name }}-log:5044"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/aai/charts/gizmo/resources/config/log/logback.xml b/kubernetes/aai/charts/gizmo/resources/config/log/logback.xml
new file mode 100644
index 0000000000..f63afd3c6b
--- /dev/null
+++ b/kubernetes/aai/charts/gizmo/resources/config/log/logback.xml
@@ -0,0 +1,213 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configuration scan="true" scanPeriod="3 seconds" debug="true">
+    <!--<jmxConfigurator /> -->
+    <!-- directory path for all other type logs -->
+    <property name="logDir" value="/var/log/onap" />
+    <property name="componentName" value="aai" />
+    <property name="subComponentName" value="aai-CRUD" />
+    <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+    <!--  default eelf log file names -->
+    <property name="generalLogName" value="application" />
+    <property name="errorLogName" value="error" />
+    <property name="metricsLogName" value="metrics" />
+    <property name="auditLogName" value="audit" />
+    <property name="debugLogName" value="debug" />
+    <property name="queueSize" value="256" />
+    <property name="maxFileSize" value="50MB" />
+    <property name="maxHistory" value="30" />
+    <property name="totalSizeCap" value="10GB" />
+    <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
+    <!-- Example evaluator filter applied against console appender -->
+    <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+        <encoder>
+            <pattern>${pattern}</pattern>
+        </encoder>
+    </appender>
+    <!-- ============================================================================ -->
+    <!-- EELF Appenders -->
+    <!-- ============================================================================ -->
+    <!-- The EELFAppender is used to record events to the general application
+       log -->
+    <appender name="EELF" class="ch.qos.logback.core.rolling.RollingFileAppender">
+        <file>${logDirectory}/${generalLogName}.log</file>
+        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+            <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+                <maxFileSize>${maxFileSize}</maxFileSize>
+            </timeBasedFileNamingAndTriggeringPolicy>
+            <maxHistory>${maxHistory}</maxHistory>
+            <totalSizeCap>${totalSizeCap}</totalSizeCap>
+        </rollingPolicy>
+        <encoder>
+            <pattern>${pattern}</pattern>
+        </encoder>
+    </appender>
+    <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+        <!-- deny all events with a level below INFO, that is TRACE and DEBUG -->
+        <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+            <level>INFO</level>
+        </filter>
+        <queueSize>${queueSize}</queueSize>
+        <appender-ref ref="EELF" />
+    </appender>
+    <!-- EELF Audit Appender. This appender is used to record audit engine
+       related logging events. The audit logger and appender are specializations
+       of the EELF application root logger and appender. This can be used to segregate
+       Policy engine events from other components, or it can be eliminated to record
+       these events as part of the application root log. -->
+    <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">
+        <file>${logDirectory}/${auditLogName}.log</file>
+        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+            <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+                <maxFileSize>${maxFileSize}</maxFileSize>
+            </timeBasedFileNamingAndTriggeringPolicy>
+            <maxHistory>${maxHistory}</maxHistory>
+            <totalSizeCap>${totalSizeCap}</totalSizeCap>
+        </rollingPolicy>
+        <encoder>
+            <pattern>${pattern}</pattern>
+        </encoder>
+    </appender>
+    <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+        <queueSize>${queueSize}</queueSize>
+        <appender-ref ref="EELFAudit" />
+    </appender>
+    <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+        <file>${logDirectory}/${metricsLogName}.log</file>
+        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+            <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+                <maxFileSize>${maxFileSize}</maxFileSize>
+            </timeBasedFileNamingAndTriggeringPolicy>
+            <maxHistory>${maxHistory}</maxHistory>
+            <totalSizeCap>${totalSizeCap}</totalSizeCap>
+        </rollingPolicy>
+        <encoder>
+            <pattern>${pattern}</pattern>
+        </encoder>
+    </appender>
+    <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+        <queueSize>${queueSize}</queueSize>
+        <appender-ref ref="EELFMetrics" />
+    </appender>
+    <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">
+        <file>${logDirectory}/${errorLogName}.log</file>
+        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+            <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+                <maxFileSize>${maxFileSize}</maxFileSize>
+            </timeBasedFileNamingAndTriggeringPolicy>
+            <maxHistory>${maxHistory}</maxHistory>
+            <totalSizeCap>${totalSizeCap}</totalSizeCap>
+        </rollingPolicy>
+        <encoder>
+            <pattern>${pattern}</pattern>
+        </encoder>
+        <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+            <level>INFO</level>
+        </filter>
+    </appender>
+    <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+        <queueSize>${queueSize}</queueSize>
+        <appender-ref ref="EELFError" />
+    </appender>
+    <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">
+        <file>${logDirectory}/${debugLogName}.log</file>
+        <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+            <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+            <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+                <maxFileSize>${maxFileSize}</maxFileSize>
+            </timeBasedFileNamingAndTriggeringPolicy>
+            <maxHistory>${maxHistory}</maxHistory>
+            <totalSizeCap>${totalSizeCap}</totalSizeCap>
+        </rollingPolicy>
+        <encoder>
+            <pattern>${pattern}</pattern>
+        </encoder>
+    </appender>
+    <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+        <queueSize>${queueSize}</queueSize>
+        <appender-ref ref="EELFDebug" />
+        <includeCallerData>true</includeCallerData>
+    </appender>
+    <!-- ============================================================================ -->
+    <!--  EELF loggers -->
+    <!-- ============================================================================ -->
+    <logger name="com.att.eelf" level="info" additivity="false">
+        <appender-ref ref="asyncEELF" />
+    </logger>
+    <logger name="com.att.eelf.security" level="info" additivity="false">
+        <appender-ref ref="asyncEELFSecurity" />
+    </logger>
+    <logger name="com.att.eelf.perf" level="info" additivity="false">
+        <appender-ref ref="asyncEELFPerformance" />
+    </logger>
+    <logger name="com.att.eelf.server" level="info" additivity="false">
+        <appender-ref ref="asyncEELFServer" />
+    </logger>
+    <logger name="com.att.eelf.policy" level="info" additivity="false">
+        <appender-ref ref="asyncEELFPolicy" />
+    </logger>
+    <logger name="com.att.eelf.debug" level="debug" additivity="false">
+        <appender-ref ref="asyncEELFDebug" />
+    </logger>
+    <logger name="com.att.eelf.audit" level="info" additivity="false">
+        <appender-ref ref="asyncEELFAudit" />
+    </logger>
+    <logger name="com.att.eelf.metrics" level="info" additivity="false">
+        <appender-ref ref="asyncEELFMetrics" />
+    </logger>
+    <logger name="com.att.eelf.error" level="info" additivity="false">
+        <appender-ref ref="asyncEELFError" />
+    </logger>
+    <!-- Spring related loggers -->
+    <logger name="org.springframework" level="WARN" />
+    <logger name="org.springframework.beans" level="WARN" />
+    <logger name="org.springframework.web" level="WARN" />
+    <logger name="com.blog.spring.jms" level="WARN" />
+    <!-- AJSC Services (bootstrap services) -->
+    <logger name="ajsc" level="WARN" />
+    <logger name="ajsc.RouteMgmtService" level="WARN" />
+    <logger name="ajsc.ComputeService" level="WARN" />
+    <logger name="ajsc.VandelayService" level="WARN" />
+    <logger name="ajsc.FilePersistenceService" level="WARN" />
+    <logger name="ajsc.UserDefinedJarService" level="WARN" />
+    <logger name="ajsc.UserDefinedBeansDefService" level="WARN" />
+    <logger name="ajsc.LoggingConfigurationService" level="WARN" />
+    <!-- AJSC related loggers (DME2 Registration, csi logging, restlet, servlet
+       logging) -->
+    <logger name="ajsc.utils" level="WARN" />
+    <logger name="ajsc.utils.DME2Helper" level="WARN" />
+    <logger name="ajsc.filters" level="WARN" />
+    <logger name="ajsc.beans.interceptors" level="WARN" />
+    <logger name="ajsc.restlet" level="WARN" />
+    <logger name="ajsc.servlet" level="WARN" />
+    <logger name="com.att" level="INFO" />
+    <logger name="com.att.ajsc.csi.logging" level="WARN" />
+    <logger name="com.att.ajsc.filemonitor" level="WARN" />
+    <!-- CRUD Service loggers -->
+    <logger name="org.openecomp.crud" level="INFO" />
+    <!-- Other Loggers that may help troubleshoot -->
+    <logger name="net.sf" level="WARN" />
+    <logger name="org.apache" level="WARN" />
+    <logger name="org.apache.commons.httpclient" level="WARN" />
+    <logger name="org.apache.commons" level="WARN" />
+    <logger name="org.apache.coyote" level="WARN" />
+    <logger name="org.apache.jasper" level="WARN" />
+    <!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging.
+       May aid in troubleshooting) -->
+    <logger name="org.apache.camel" level="WARN" />
+    <logger name="org.apache.cxf" level="WARN" />
+    <logger name="org.apache.camel.processor.interceptor" level="WARN" />
+    <logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+    <logger name="org.apache.cxf.service" level="WARN" />
+    <logger name="org.restlet" level="WARN" />
+    <logger name="org.apache.camel.component.restlet" level="WARN" />
+    <!-- logback internals logging -->
+    <logger name="ch.qos.logback.classic" level="WARN" />
+    <logger name="ch.qos.logback.core" level="WARN" />
+    <root level="INFO">
+        <appender-ref ref="asyncEELFDebug" />
+    </root>
+</configuration>