Sidecar filebeat container and ConfigMap

Add filebeat agent to ships logs to logging system.
Apply ConfigMap to manager filebeat and log configuration.

Change-Id: I02511b698c66d718d010df144f9dc27a6a52c2c6
Issue-ID: MULTICLOUD-151
Issue-ID: LOG-137
Signed-off-by: liangke <lokyse@163.com>

7 files changed, 173 insertions, 15 deletions

diff --git a/kubernetes/multicloud/resources/config/log/filebeat/filebeat.yml b/kubernetes/multicloud/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..706f24d693
--- /dev/null
+++ b/kubernetes/multicloud/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,41 @@
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 24h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 48h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["logstash.{{.Values.nsPrefix}}:5044"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/multicloud/resources/config/log/framework/log.yml b/kubernetes/multicloud/resources/config/log/framework/log.yml
new file mode 100644
index 0000000000..a4943f015a
--- /dev/null
+++ b/kubernetes/multicloud/resources/config/log/framework/log.yml
@@ -0,0 +1,26 @@
+version: 1
+disable_existing_loggers: False
+
+loggers:
+    multivimbroker:
+      handlers: [multivimbroker_handler]
+      level: "DEBUG"
+      propagate: False
+
+handlers:
+    multivimbroker_handler:
+        level: "DEBUG"
+        class: "logging.handlers.RotatingFileHandler"
+        filename: "/var/log/onap/multicloud/multivimbroker/multivimbroker.log"
+        formatter: "mdcFormat"
+        maxBytes: 1024*1024*50
+        backupCount: 10
+
+formatters:
+    standard:
+        format: "%(asctime)s:[%(name)s]:[%(filename)s]-[%(lineno)d] [%(levelname)s]:%(message)s"
+    mdcFormat:
+        format: "%(asctime)s:[%(name)s]:[%(filename)s]-[%(lineno)d] [%(levelname)s]:[%(mdc)s]: %(message)s"
+        mdcfmt: "{requestID}"
+        datefmt: "%Y-%m-%d %H:%M:%S"
+        (): onaplogging.mdcformatter.MDCFormatter
\ No newline at end of file
diff --git a/kubernetes/multicloud/resources/config/log/vio/log.yml b/kubernetes/multicloud/resources/config/log/vio/log.yml
new file mode 100644
index 0000000000..c9d2bf84f3
--- /dev/null
+++ b/kubernetes/multicloud/resources/config/log/vio/log.yml
@@ -0,0 +1,26 @@
+version: 1
+disable_existing_loggers: False
+
+loggers:
+    vio:
+      handlers: [vio_handler]
+      level: "DEBUG"
+      propagate: False
+
+handlers:
+    vio_handler:
+        level: "DEBUG"
+        class: "logging.handlers.RotatingFileHandler"
+        filename: "/var/log/onap/multicloud/vio/vio.log"
+        formatter: "mdcFormat"
+        maxBytes: 1024*1024*50
+        backupCount: 10
+
+formatters:
+    standard:
+        format: "%(asctime)s:[%(name)s]:[%(filename)s]-[%(lineno)d] [%(levelname)s]:%(message)s"
+    mdcFormat:
+        format: "%(asctime)s:[%(name)s]:[%(filename)s]-[%(lineno)d] [%(levelname)s]:[%(mdc)s]: %(message)s"
+        mdcfmt: "{requestID}"
+        datefmt: "%Y-%m-%d %H:%M:%S"
+        (): onaplogging.mdcformatter.MDCFormatter
\ No newline at end of file
diff --git a/kubernetes/multicloud/templates/framework-deployment.yaml b/kubernetes/multicloud/templates/framework-deployment.yaml
index dcdf0a2d75..f0c886506f 100644
--- a/kubernetes/multicloud/templates/framework-deployment.yaml
+++ b/kubernetes/multicloud/templates/framework-deployment.yaml
@@ -14,7 +14,6 @@ spec:
         app: framework
       name: multicloud-framework
     spec:
-     hostname: framework
      containers:
      - env:
        - name: MSB_ADDR
@@ -31,12 +30,15 @@ spec:
          value: "AAI"
        - name: AAI_PASSWORD
          value: "AAI"
+       image: {{ .Values.image.framework }}
+       imagePullPolicy: {{ .Values.pullPolicy }}
        name: framework
        volumeMounts:
-       - mountPath: /service/multivimbroker/logs
+       - mountPath: /var/log/onap
          name: framework-log
-       image: {{ .Values.image.framework }}
-       imagePullPolicy: {{ .Values.pullPolicy }}
+       - mountPath: /opt/multivimbroker/multivimbroker/pub/config/log.yml
+         name: framework-logconfig
+         subPath: log.yml
        ports:
        - containerPort: 9001
        livenessProbe:
@@ -49,11 +51,29 @@ spec:
          timeoutSeconds: 10
          successThreshold: 1
          failureThreshold: 5
-     restartPolicy: Always
+     - image: {{ .Values.image.filebeat }}
+       imagePullPolicy: {{ .Values.pullPolicy }}
+       name: filebeat-onap
+       volumeMounts:
+       - mountPath: /usr/share/filebeat/filebeat.yml
+         name: filebeat-conf
+         subPath: filebeat.yml
+       - mountPath: /var/log/onap
+         name: framework-log
+       - mountPath: /usr/share/filebeat/data
+         name: framework-data-filebeat
      volumes:
      - name: framework-log
-       hostPath:
-         path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/multicloud/framework/logs
+       emptyDir: {}
+     - name: framework-data-filebeat
+       emptyDir: {}
+     - name: filebeat-conf
+       configMap:
+         name: multicloud-filebeat-configmap
+     - name: framework-logconfig
+       configMap:
+         name: multicloud-framework-log-configmap
      imagePullSecrets:
      - name: "{{ .Values.nsPrefix }}-docker-registry-key"
+     restartPolicy: Always
 #{{ end }}
diff --git a/kubernetes/multicloud/templates/multicloud-log-configmap.yaml b/kubernetes/multicloud/templates/multicloud-log-configmap.yaml
new file mode 100644
index 0000000000..754178c25f
--- /dev/null
+++ b/kubernetes/multicloud/templates/multicloud-log-configmap.yaml
@@ -0,0 +1,25 @@
+#{{ if not .Values.disableVidVidServer }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: multicloud-filebeat-configmap
+  namespace: {{ .Values.nsPrefix }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: multicloud-framework-log-configmap
+  namespace: {{ .Values.nsPrefix }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/framework/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: multicloud-vio-log-configmap
+  namespace: {{ .Values.nsPrefix }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/vio/*").AsConfig . | indent 2 }}
+#{{ end }}
diff --git a/kubernetes/multicloud/templates/multicloud-vio-deployment.yaml b/kubernetes/multicloud/templates/multicloud-vio-deployment.yaml
index df99542051..30413af245 100644
--- a/kubernetes/multicloud/templates/multicloud-vio-deployment.yaml
+++ b/kubernetes/multicloud/templates/multicloud-vio-deployment.yaml
@@ -14,7 +14,6 @@ spec:
         app: multicloud-vio
       name: multicloud-vio
     spec:
-     hostname: multicloud-vio
      containers:
      - env:
        - name: MSB_ADDR
@@ -33,8 +32,11 @@ spec:
          value: "AAI"
        name: multicloud-vio
        volumeMounts:
-       - mountPath: /service/vio/logs
+       - mountPath: /var/log/onap
          name: vio-log
+       - mountPath: /opt/vio/vio/pub/config/log.yml
+         name: vio-logconfig
+         subPath: log.yml
        image: {{ .Values.image.vio }}
        imagePullPolicy: {{ .Values.pullPolicy }}
        ports:
@@ -49,11 +51,29 @@ spec:
          timeoutSeconds: 10
          successThreshold: 1
          failureThreshold: 5
-     restartPolicy: Always
+     - image: {{ .Values.image.filebeat }}
+       imagePullPolicy: {{ .Values.pullPolicy }}
+       name: filebeat-onap
+       volumeMounts:
+       - mountPath: /usr/share/filebeat/filebeat.yml
+         name: filebeat-conf
+         subPath: filebeat.yml
+       - mountPath: /var/log/onap
+         name: vio-log
+       - mountPath: /usr/share/filebeat/data
+         name: vio-data-filebeat
      volumes:
      - name: vio-log
-       hostPath:
-         path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/multicloud/vio/logs
+       emptyDir: {}
+     - name: vio-data-filebeat
+       emptyDir: {}
+     - name: filebeat-conf
+       configMap:
+         name: multicloud-filebeat-configmap
+     - name: vio-logconfig
+       configMap:
+         name: multicloud-vio-log-configmap
      imagePullSecrets:
      - name: "{{ .Values.nsPrefix }}-docker-registry-key"
+     restartPolicy: Always
 #{{ end }}
diff --git a/kubernetes/multicloud/values.yaml b/kubernetes/multicloud/values.yaml
index 2dc24b24fe..704f0250b0 100644
--- a/kubernetes/multicloud/values.yaml
+++ b/kubernetes/multicloud/values.yaml
@@ -4,11 +4,11 @@ nodePortPrefix: 302
 dataRootDir: /dockerdata-nfs
 image:
   readiness: oomk8s/readiness-check:1.1.0
-  framework: nexus3.onap.org:10001/onap/multicloud/framework:v1.0.0
-  vio: nexus3.onap.org:10001/onap/multicloud/vio:v1.0.0
+  framework: nexus3.onap.org:10001/onap/multicloud/framework:latest
+  vio: nexus3.onap.org:10001/onap/multicloud/vio:latest
   ocata: nexus3.onap.org:10001/onap/multicloud/openstack-ocata:v1.0.0
   windriver: nexus3.onap.org:10001/onap/multicloud/openstack-windriver:v1.0.0
-
+  filebeat: docker.elastic.co/beats/filebeat:5.5.0
 # domain name of msb gateway
 msbgateway: msb-iag.{{ .Values.nsPrefix }}
 msbPort: 80