[DOC] Remove references to old versions

Also add requirements for Frankfurt release

Issue-ID: OOM-1960
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: Idaa4925515737221c90c4bf9141406fa1d428f15

3 files changed, 17 insertions, 16 deletions

diff --git a/docs/oom_cloud_setup_guide.rst b/docs/oom_cloud_setup_guide.rst
index 899f0d7e65..e3790f88db 100644
--- a/docs/oom_cloud_setup_guide.rst
+++ b/docs/oom_cloud_setup_guide.rst
@@ -53,6 +53,7 @@ The versions of Kubernetes that are supported by OOM are as follows:
   casablanca         1.11.5       2.9.1   1.11.5    17.03.x
   dublin             1.13.5       2.12.3  1.13.5    18.09.5
   el alto            1.15.2       2.14.2  1.15.2    18.09.x
+  frankfurt          1.15.9       2.16.3  1.15.9    18.09.x
   ==============     ===========  ======  ========  ========
 
 Minimum Hardware Configuration
diff --git a/docs/oom_user_guide.rst b/docs/oom_user_guide.rst
index 48701f7c31..4cc1ab6d22 100644
--- a/docs/oom_user_guide.rst
+++ b/docs/oom_user_guide.rst
@@ -114,7 +114,7 @@ stable which should be removed to avoid confusion::
 
 To prepare your system for an installation of ONAP, you'll need to::
 
-  > git clone -b casablanca http://gerrit.onap.org/r/oom
+  > git clone -b frankfurt http://gerrit.onap.org/r/oom
   > cd oom/kubernetes
 
 
@@ -294,7 +294,7 @@ value for the vnfDeployment/openstack/oam_network_cidr key as shown below.
 
 To deploy ONAP with this environment file, enter::
 
-  > helm deploy local/onap -n casablanca -f environments/onap-production.yaml
+  > helm deploy local/onap -n onap -f environments/onap-production.yaml
 
 .. include:: environments_onap_demo.yaml
    :code: yaml
@@ -600,14 +600,14 @@ sequence of events described in the previous paragraph would be initiated.
 For example, to upgrade a container by changing configuration, specifically an
 environment value::
 
-  > helm deploy casablanca onap/so --version 2.0.1 --set enableDebug=true
+  > helm deploy onap onap/so --version 2.0.1 --set enableDebug=true
 
 Issuing this command will result in the appropriate container being stopped by
 Kubernetes and replaced with a new container with the new environment value.
 
 To upgrade a component to a new version with a new configuration file enter::
 
-  > helm deploy casablanca onap/so --version 2.0.2 -f environments/demo.yaml
+  > helm deploy onbap onap/so --version 2.0.2 -f environments/demo.yaml
 
 To fetch release history enter::
 
@@ -700,19 +700,19 @@ from a running deployment the operator perform a 'dry-run' to display exactly
 what will happen with a given command prior to actually deleting anything.  For
 example::
 
-  > helm undeploy casablanca --dry-run
+  > helm undeploy onap --dry-run
 
-will display the outcome of deleting the 'casablanca' release from the
+will display the outcome of deleting the 'onap' release from the
 deployment.
 To completely delete a release and remove it from the internal store enter::
 
-  > helm undeploy casablanca --purge
+  > helm undeploy onap --purge
 
 One can also remove individual components from a deployment by changing the
 ONAP configuration values.  For example, to remove `so` from a running
 deployment enter::
 
-  > helm undeploy casablanca-so --purge
+  > helm undeploy onap-so --purge
 
 will remove `so` as the configuration indicates it's no longer part of the
 deployment. This might be useful if a one wanted to replace just `so` by
diff --git a/kubernetes/contrib/tools/rke/rke_setup.sh b/kubernetes/contrib/tools/rke/rke_setup.sh
index 409da3987c..cde7d4caa0 100755
--- a/kubernetes/contrib/tools/rke/rke_setup.sh
+++ b/kubernetes/contrib/tools/rke/rke_setup.sh
@@ -21,7 +21,7 @@
 # https://wiki.onap.org/display/DW/OOM+RKE+Kubernetes+Deployment
 # source from https://jira.onap.org/browse/OOM-1598
 #
-# master/dublin 
+# master/dublin
 #     RKE 0.1.16 Kubernetes 1.11.6, kubectl 1.11.6, Helm 2.9.1, Docker 18.06
 #     20190428 RKE 0.2.1, Kubernetes 1.13.5, kubectl 1.13.5, Helm 2.12.3, Docker 18.09.5
 # single node install, HA pending
@@ -30,7 +30,7 @@ usage() {
 cat <<EOF
 Usage: $0 [PARAMs]
 example
-sudo ./rke_setup.sh -b dublin -s rke.onap.cloud -e onap -l amdocs -v true
+sudo ./rke_setup.sh -b master -s rke.onap.cloud -e onap -l amdocs -v true
 -u                  : Display usage
 -b [branch]         : branch = master or dublin (required)
 -s [server]         : server = IP or DNS name (required)
@@ -48,16 +48,16 @@ install_onap() {
   KUBECTL_VERSION=1.13.5
   HELM_VERSION=2.12.3
   DOCKER_VERSION=18.09
- 
+
   # copy your private ssh key and cluster.yml file to the vm
   # on your dev machine
   #sudo cp ~/.ssh/onap_rsa .
-  #sudo chmod 777 onap_rsa 
+  #sudo chmod 777 onap_rsa
   #scp onap_rsa ubuntu@192.168.241.132:~/
   # on this vm
-  #sudo chmod 400 onap_rsa 
+  #sudo chmod 400 onap_rsa
   #sudo cp onap_rsa ~/.ssh
-  # make sure public key is insetup correctly in 
+  # make sure public key is insetup correctly in
   # sudo vi ~/.ssh/authorized_keys
 
   echo "please supply your ssh key as provided by the -k keyname - it must be be chmod 400 and chown user:user in ~/.ssh/"
@@ -66,8 +66,8 @@ install_onap() {
   echo "specifically"
   echo "address: $SERVER"
   echo "user: $USERNAME"
-  echo "ssh_key_path: $SSHPATH_PREFIX/$SSHKEY" 
-  
+  echo "ssh_key_path: $SSHPATH_PREFIX/$SSHKEY"
+
   RKETOOLS=
   HYPERCUBE=
   POD_INFRA_CONTAINER=