[DOC] ServiceMesh documentation

Add instructions for SM Installation (addon guide), ONAP configuration
(customize_override) and access guide

Issue-ID: OOM-3006

Signed-off-by: Andreas Geissler <andreas-geissler@telekom.de>
Change-Id: I31acad2c8c84ed3382e1c43897333f9ff565ff6d

12 files changed, 540 insertions, 116 deletions

diff --git a/docs/conf.py b/docs/conf.py
index 39f5051de4..29c57e6da0 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -54,5 +54,6 @@ def setup(app):
 
 
 linkcheck_ignore = [
+  "https://istio-release.storage.googleapis.com/charts",
   r'http://localhost:\d+/'
 ]
diff --git a/docs/sections/guides/access_guides/oom_access_info.rst b/docs/sections/guides/access_guides/oom_access_info.rst
index 2e779105f2..4e9866725e 100644
--- a/docs/sections/guides/access_guides/oom_access_info.rst
+++ b/docs/sections/guides/access_guides/oom_access_info.rst
@@ -3,19 +3,174 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. Copyright (C) 2022 Nordix Foundation
 
+.. Links
+.. _Kubernetes LoadBalancer: https://kubernetes.io/docs/concepts/services-networking/service/#loadbalancer
+.. _Kubernetes NodePort: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
+
 .. _oom_access_info_guide:
 
 OOM Access Info
----------------
+###############
 
 .. figure:: ../../resources/images/oom_logo/oomLogoV2-medium.png
    :align: right
 
+Access via NodePort/Loadbalancer
+********************************
+
+The ONAP deployment created by OOM operates in a private IP network that isn't
+publicly accessible (i.e. OpenStack VMs with private internal network) which
+blocks access to the ONAP User Interfaces.
+To enable direct access to a service from a user's own environment (a laptop etc.)
+the application's internal port is exposed through a `Kubernetes NodePort`_ or
+`Kubernetes LoadBalancer`_ object.
+
+Typically, to be able to access the Kubernetes nodes publicly a public address
+is assigned. In OpenStack this is a floating IP address.
+
+Most ONAP applications use the `NodePort` as predefined `service:type`,
+which opens allows access to the service through the the IP address of each
+Kubernetes node.
+When using  the `Loadbalancer` as `service:type` `Kubernetes LoadBalancer`_ object
+which gets a separate IP address.
+
+.. note::
+  The following example uses the `ONAP Portal`, which is not actively maintained
+  in Kohn and will be replaced in the future
+
+When e.g. the `portal-app` chart is deployed a Kubernetes service is created that
+instantiates a load balancer.  The LB chooses the private interface of one of
+the nodes as in the example below (10.0.0.4 is private to the K8s cluster only).
+Then to be able to access the portal on port 8989 from outside the K8s &
+OpenStack environment, the user needs to assign/get the floating IP address that
+corresponds to the private IP as follows::
+
+  > kubectl -n onap get services|grep "portal-app"
+  portal-app  LoadBalancer   10.43.142.201   10.0.0.4   8989:30215/TCP,8006:30213/TCP,8010:30214/TCP   1d   app=portal-app,release=dev
+
+
+In this example, use the 11.0.0.4 private address as a key find the
+corresponding public address which in this example is 10.12.6.155. If you're
+using OpenStack you'll do the lookup with the horizon GUI or the OpenStack CLI
+for your tenant (openstack server list).  That IP is then used in your
+`/etc/hosts` to map the fixed DNS aliases required by the ONAP Portal as shown
+below::
+
+  10.12.6.155 portal.api.simpledemo.onap.org
+  10.12.6.155 vid.api.simpledemo.onap.org
+  10.12.6.155 sdc.api.fe.simpledemo.onap.org
+  10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
+  10.12.6.155 sdc.dcae.plugin.simpledemo.onap.org
+  10.12.6.155 portal-sdk.simpledemo.onap.org
+  10.12.6.155 policy.api.simpledemo.onap.org
+  10.12.6.155 aai.api.sparky.simpledemo.onap.org
+  10.12.6.155 cli.api.simpledemo.onap.org
+  10.12.6.155 msb.api.discovery.simpledemo.onap.org
+  10.12.6.155 msb.api.simpledemo.onap.org
+  10.12.6.155 clamp.api.simpledemo.onap.org
+  10.12.6.155 so.api.simpledemo.onap.org
+  10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
+
+Ensure you've disabled any proxy settings the browser you are using to access
+the portal and then simply access now the new ssl-encrypted URL:
+``https://portal.api.simpledemo.onap.org:30225/ONAPPORTAL/login.htm``
+
+.. note::
+  Using the HTTPS based Portal URL the Browser needs to be configured to accept
+  unsecure credentials.
+  Additionally when opening an Application inside the Portal, the Browser
+  might block the content, which requires to disable the blocking and reloading
+  of the page
+
+.. note::
+  Besides the ONAP Portal the Components can deliver additional user interfaces,
+  please check the Component specific documentation.
+
+.. note::
+
+   | Alternatives Considered:
+
+   -  Kubernetes port forwarding was considered but discarded as it would
+      require the end user to run a script that opens up port forwarding tunnels
+      to each of the pods that provides a portal application widget.
+
+   -  Reverting to a VNC server similar to what was deployed in the Amsterdam
+      release was also considered but there were many issues with resolution,
+      lack of volume mount, /etc/hosts dynamic update, file upload that were
+      a tall order to solve in time for the Beijing release.
+
+   Observations:
+
+   -  If you are not using floating IPs in your Kubernetes deployment and
+      directly attaching a public IP address (i.e. by using your public provider
+      network) to your K8S Node VMs' network interface, then the output of
+      'kubectl -n onap get services | grep "portal-app"'
+      will show your public IP instead of the private network's IP. Therefore,
+      you can grab this public IP directly (as compared to trying to find the
+      floating IP first) and map this IP in /etc/hosts.
+
 Some relevant information regarding accessing OOM from outside the cluster etc
 
+ONAP Nodeports
+==============
+
+NodePorts are used to allow client applications, that run outside of
+Kubernetes, access to ONAP components deployed by OOM.
+A NodePort maps an externally reachable port to an internal port of an ONAP
+microservice.
+It should be noted that the use of NodePorts is temporary.
+An alternative solution based on Ingress Controller, which initial support is
+already in place. It is planned to become a default deployment option in the
+London release.
+
+More information from official Kubernetes documentation about
+`Kubernetes NodePort`_.
+
+The following table lists all the NodePorts used by ONAP.
+
+.. csv-table:: NodePorts table
+   :file: ../../resources/csv/nodeports.csv
+   :widths: 20,20,20,20,20
+   :header-rows: 1
+
+
+This table retrieves information from the ONAP deployment using the following
+Kubernetes command:
+
+.. code-block:: bash
+
+  kubectl get svc -n onap -o go-template='{{range .items}}{{range.spec.ports}}{{if .nodePort}}{{.nodePort}}{{.}}{{"\n"}}{{end}}{{end}}{{end}}'
+
+
+(Optional) Access via Ingress
+*****************************
+
+Using Ingress as access method requires the installation of an Ingress
+controller and the configuration of the ONAP deployment to use it.
+
+For "ONAP on ServiceMesh" you can find the instructions in:
+
+- :ref:`oom_base_optional_addons`
+- :ref:`oom_customize_overrides`
+
+In the ServiceMesh deployment the Istio IngressGateway is the only access point
+for ONAP component interfaces.
+Usually the Ingress is accessed via a LoadBalancer IP (<ingress-IP>),
+which is used as central address.
+All APIs/UIs are provided via separate URLs which are routed to the component service.
+To use these URLs they need to be resolvable via DNS or via /etc/hosts.
+
+The domain name is usually defined in the `global` section of the ONAP helm-charts,
+`virtualhost.baseurl` (here "simpledemo.onap.org") whereas the hostname of
+the service (e.g. "sdc-fe-ui") is defined in the component's chart.
+
+.. code-block:: none
 
-.. toctree::
-  :maxdepth: 1
+  <ingress-IP> kiali.simpledemo.onap.org
+  <ingress-IP> cds-ui.simpledemo.onap.org
+  <ingress-IP> sdc-fe-ui.simpledemo.onap.org
+  ...
 
-  oom_ingress_access.rst
+To access e.g. the SDC UI now the new ssl-encrypted URL:
 
+``https://sdc-fe-ui.simpledemo.onap.org/sdc1``
diff --git a/docs/sections/guides/access_guides/oom_ingress_access.rst b/docs/sections/guides/access_guides/oom_ingress_access.rst
deleted file mode 100644
index 0c64375098..0000000000
--- a/docs/sections/guides/access_guides/oom_ingress_access.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0
-.. International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. Copyright (C) 2022 Nordix Foundation
-
-.. Links
-
-
-.. figure:: ../../resources/images/oom_logo/oomLogoV2-medium.png
-   :align: right
-
-.. _oom_ingress_access:
-
-
-Ingress access to OOM
-#####################
-
-TBD
diff --git a/docs/sections/guides/deployment_guides/oom_customize_overrides.rst b/docs/sections/guides/deployment_guides/oom_customize_overrides.rst
index 3acb8b6ee6..a49543cc0c 100644
--- a/docs/sections/guides/deployment_guides/oom_customize_overrides.rst
+++ b/docs/sections/guides/deployment_guides/oom_customize_overrides.rst
@@ -32,7 +32,7 @@ Users can customize the override files to suit their required deployment.
 
 
 Enabling/Disabling Components
------------------------------
+*****************************
 Here is an example of the nominal entries that need to be provided.
 Different values files are available for different contexts.
 
@@ -43,6 +43,68 @@ Different values files are available for different contexts.
 
 |
 
-Some other heading
-------------------
-adva
\ No newline at end of file
+(Optional) "ONAP on Service Mesh"
+*********************************
+
+To enable "ONAP on Service Mesh" both "ServiceMesh" and "Ingress"
+configuration entries need to be configured before deployment.
+
+Global settings relevant for ServiceMesh:
+
+.. code-block:: yaml
+
+  global:
+    ingress:
+      # generally enable ingress for ONAP components
+      enabled: false
+      # enable all component's Ingress interfaces
+      enable_all: false
+      # default Ingress base URL
+      # can be overwritten in component by setting ingress.baseurlOverride
+      virtualhost:
+        baseurl: "simpledemo.onap.org"
+      # All http requests via ingress will be redirected on Ingress controller
+      # only valid for Istio Gateway (ServiceMesh enabled)
+      config:
+        ssl: "redirect"
+      # you can set an own Secret containing a certificate
+      # only valid for Istio Gateway (ServiceMesh enabled)
+      #  tls:
+      #    secret: 'my-ingress-cert'
+      # optional: Namespace of the Istio IngressGateway
+      # only valid for Istio Gateway (ServiceMesh enabled)
+      namespace: istio-ingress
+  ...
+    serviceMesh:
+      enabled: true
+      tls: true
+      # be aware that linkerd is not well tested
+      engine: "istio" # valid value: istio or linkerd
+    aafEnabled: false
+    cmpv2Enabled: false
+    tlsEnabled: false
+    msbEnabled: false
+
+ServiceMesh settings:
+
+- enabled: true → enables ServiceMesh functionality in the ONAP Namespace (Istio: enables Sidecar deployment)
+- tls: true → enables mTLS encryption in Sidecar communication
+- engine: istio → sets the SM engine (currently only Istio is supported)
+- aafEnabled: false → disables AAF usage for TLS interfaces
+- tlsEnabled: false → disables creation of TLS in component services
+- cmpv2Enabled: false → disable cmpv2 feature
+- msbEnabled: false → MSB is not used in Istio setup (Open, if all components are MSB independend)
+
+Ingress settings:
+
+- enabled: true → enables Ingress using: Nginx (when SM disabled), Istio IngressGateway (when SM enabled)
+- enable_all: true → enables Ingress configuration in each component
+- virtualhost.baseurl: "simpledemo.onap.org" → sets globally the URL for all Interfaces set by the components,
+    resulting in e.g. "aai-api.simpledemo.onap.org", can be overwritten in the component via: ingress.baseurlOverride
+- config.ssl: redirect → sets in the Ingress globally the redirection of all Interfaces from http (port 80) to https (port 443)
+- config.tls.secret: "..." → (optional) overrides the default selfsigned SSL certificate with a certificate stored in the specified secret
+- namespace: istio-ingress → (optional) overrides the namespace of the ingress gateway which is used for the created SSL certificate
+
+.. note::
+  For "ONAP on Istio" an example override file (`onap-all-ingress-istio.yaml`)
+  can be found in the `oom/kubernetes/onap/resources/overrides/` directory.
diff --git a/docs/sections/guides/infra_guides/oom_base_optional_addons.rst b/docs/sections/guides/infra_guides/oom_base_optional_addons.rst
index 4b4fbf7883..5f81a363e9 100644
--- a/docs/sections/guides/infra_guides/oom_base_optional_addons.rst
+++ b/docs/sections/guides/infra_guides/oom_base_optional_addons.rst
@@ -5,6 +5,10 @@
 
 .. Links
 .. _Prometheus stack README: https://github.com/prometheus-community/helm-charts/tree/main/charts/kube-prometheus-stack#readme
+.. _ONAP Next Generation Security & Logging Structure: https://wiki.onap.org/pages/viewpage.action?pageId=103417456
+.. _Istio best practices: https://docs.solo.io/gloo-mesh-enterprise/latest/setup/prod/namespaces/
+.. _Istio setup guide: https://istio.io/latest/docs/setup/install/helm/
+.. _Kiali setup guide: https://kiali.io/docs/installation/installation-guide/example-install/
 
 .. _oom_base_optional_addons:
 
@@ -39,3 +43,140 @@ To install the prometheus stack, execute the following:
 - To install prometheus, execute the following, replacing the <recommended-pm-version> with the version defined in the :ref:`versions_table` table::
 
     > helm install prometheus prometheus-community/kube-prometheus-stack --namespace=prometheus --create-namespace --version=<recommended-pm-version>
+
+ONAP on Service Mesh
+********************
+
+.. warning::
+    "ONAP on Service Mesh" is not fully supported in "Kohn". Full support is
+    planned for London release to support the
+    `ONAP Next Generation Security & Logging Structure`_
+
+.. figure:: ../../resources/images/servicemesh/ServiceMesh.png
+   :align: center
+
+ONAP is currenty planned to support Istio as default ServiceMesh platform.
+Therefor the following instructions describe the setup of Istio and required tools.
+Used `Istio best practices`_ and `Istio setup guide`_
+
+Istio Platform Installation
+===========================
+
+Install Istio Basic Platform
+----------------------------
+
+- Configure the Helm repository::
+
+    > helm repo add istio https://istio-release.storage.googleapis.com/charts
+
+    > helm repo update
+
+- Create a namespace for "mesh-level" configurations::
+
+    > kubectl create namespace istio-config
+
+- Create a namespace istio-system for Istio components::
+
+    > kubectl create namespace istio-system
+
+- Install the Istio Base chart which contains cluster-wide resources used by the
+  Istio control plane, replacing the <recommended-istio-version> with the version
+  defined in the :ref:`versions_table` table::
+
+    > helm upgrade -i istio-base istio/base -n istio-system --version <recommended-istio-version>
+
+- Install the Istio Base Istio Discovery chart which deploys the istiod service, replacing the
+  <recommended-istio-version> with the version defined in the :ref:`versions_table` table
+  (enable the variable to enforce the (sidecar) proxy startup before the container start)::
+
+    > helm upgrade -i istiod istio/istiod -n istio-system --version <recommended-istio-version>
+    --wait --set global.proxy.holdApplicationUntilProxyStarts=true --set meshConfig.rootNamespace=istio-config
+
+Add an EnvoyFilter for HTTP header case
+---------------------------------------
+
+When handling HTTP/1.1, Envoy will normalize the header keys to be all lowercase.
+While this is compliant with the HTTP/1.1 spec, in practice this can result in issues
+when migrating existing systems that might rely on specific header casing.
+In our case a problem was detected in the SDC client implementation, which relies on
+uppercase header values. To solve this problem in general we add a EnvoyFilter to keep
+the uppercase header in the istio-config namespace to apply for all namespaces, but
+set the context to SIDECAR_INBOUND to avoid problems in the connection between Istio-Gateway and Services
+
+- Create a EnvoyFilter file (e.g. envoyfilter-case.yaml)
+
+    .. collapse:: envoyfilter-case.yaml
+
+      .. include:: ../../resources/yaml/envoyfilter-case.yaml
+         :code: yaml
+
+- Apply the change to Istio::
+
+    > kubectl apply -f envoyfilter-case.yaml
+
+Install Istio Gateway
+---------------------
+
+- Create a namespace istio-ingress for the Istio Ingress gateway
+  and enable istio-injection::
+
+    > kubectl create namespace istio-ingress
+
+    > kubectl label namespace istio-ingress istio-injection=enabled
+
+- Install the Istio Gateway chart,replacing the
+  <recommended-istio-version> with the version defined in
+  the :ref:`versions_table` table::
+
+    > helm upgrade -i istio-ingressgateway istio/gateway -n istio-ingress
+    --version <recommended-istio-version> --wait
+
+Kiali Installation
+==================
+
+Kiali is used to visualize the Network traffic in a ServiceMesh enabled cluster
+For setup the kiali operator is used, see `Kiali setup guide`_
+
+- Install kiali-operator namespace::
+
+    > kubectl create namespace kiali-operator
+
+    > kubectl label namespace kiali-operator istio-injection=enabled
+
+- Install the kiali-operator::
+
+    > helm repo add kiali https://kiali.org/helm-charts
+
+    > helm repo update kiali
+
+    > helm install --namespace kiali-operator kiali/kiali-operator
+
+- Create Kiali CR file (e.g. kiali.yaml)
+
+    .. collapse:: kiali.yaml
+
+      .. include:: ../../resources/yaml/kiali.yaml
+         :code: yaml
+
+- Install kiali::
+
+    > kubectl apply -f kiali.yaml
+
+- Create Ingress gateway entry for the kiali web interface
+  using the configured Ingress <base-url> (here "simpledemo.onap.org")
+  as described in :ref:`oom_customize_overrides`
+
+    .. collapse:: kiali-ingress.yaml
+
+      .. include:: ../../resources/yaml/kiali-ingress.yaml
+         :code: yaml
+
+- Add the Ingress entry for Kiali::
+
+    > kubectl -n istio-system apply -f kiali-ingress.yaml
+
+
+Jaeger Installation
+===================
+
+To be done...
\ No newline at end of file
diff --git a/docs/sections/guides/infra_guides/oom_infra_setup.rst b/docs/sections/guides/infra_guides/oom_infra_setup.rst
index f9668de458..ed7b05a103 100644
--- a/docs/sections/guides/infra_guides/oom_infra_setup.rst
+++ b/docs/sections/guides/infra_guides/oom_infra_setup.rst
@@ -52,14 +52,23 @@ The versions of software that are supported by OOM are as follows:
 
 .. _versions_table:
 
-.. table:: OOM Software Requirements
-
-  ==============     ===========  =======  ========  ========  ============  =================  =======
-  Release            Kubernetes   Helm     kubectl   Docker    Cert-Manager  Prometheus Stack   Strimzi
-  ==============     ===========  =======  ========  ========  ============  =================  =======
-  Jakarta            1.22.4       3.6.3    1.22.4    20.10.x   1.8.0         35.x               0.28.0
-  Kohn               1.23.8       3.8.2    1.23.8    20.10.x   1.8.0         35.x               0.32.0
-  ==============     ===========  =======  ========  ========  ============  =================  =======
+.. table:: OOM Software Requirements (base)
+
+  ==============     ===========  =======  ========  ========  ============  =======
+  Release            Kubernetes   Helm     kubectl   Docker    Cert-Manager  Strimzi
+  ==============     ===========  =======  ========  ========  ============  =======
+  Jakarta            1.22.4       3.6.3    1.22.4    20.10.x   1.8.0         0.28.0
+  Kohn               1.23.8       3.8.2    1.23.8    20.10.x   1.8.0         0.32.0
+  ==============     ===========  =======  ========  ========  ============  =======
+
+.. table:: OOM Software Requirements (optional)
+
+  ==============     =================  ======
+  Release            Prometheus Stack   Istio
+  ==============     =================  ======
+  Jakarta            35.x               ---
+  Kohn               35.x               1.15.1
+  ==============     =================  ======
 
 
 .. toctree::
diff --git a/docs/sections/guides/user_guides/oom_user_guide.rst b/docs/sections/guides/user_guides/oom_user_guide.rst
index c0f4f6ef73..449d5de3fa 100644
--- a/docs/sections/guides/user_guides/oom_user_guide.rst
+++ b/docs/sections/guides/user_guides/oom_user_guide.rst
@@ -234,88 +234,6 @@ can be modified, for example the `so`'s `liveness` probe could be disabled
 
   <...>
 
-Accessing the ONAP Portal using OOM and a Kubernetes Cluster
-------------------------------------------------------------
-
-The ONAP deployment created by OOM operates in a private IP network that isn't
-publicly accessible (i.e. OpenStack VMs with private internal network) which
-blocks access to the ONAP Portal. To enable direct access to this Portal from a
-user's own environment (a laptop etc.) the portal application's port 8989 is
-exposed through a `Kubernetes LoadBalancer`_ object.
-
-Typically, to be able to access the Kubernetes nodes publicly a public address
-is assigned. In OpenStack this is a floating IP address.
-
-When the `portal-app` chart is deployed a Kubernetes service is created that
-instantiates a load balancer.  The LB chooses the private interface of one of
-the nodes as in the example below (10.0.0.4 is private to the K8s cluster only).
-Then to be able to access the portal on port 8989 from outside the K8s &
-OpenStack environment, the user needs to assign/get the floating IP address that
-corresponds to the private IP as follows::
-
-  > kubectl -n onap get services|grep "portal-app"
-  portal-app  LoadBalancer   10.43.142.201   10.0.0.4   8989:30215/TCP,8006:30213/TCP,8010:30214/TCP   1d   app=portal-app,release=dev
-
-
-In this example, use the 11.0.0.4 private address as a key find the
-corresponding public address which in this example is 10.12.6.155. If you're
-using OpenStack you'll do the lookup with the horizon GUI or the OpenStack CLI
-for your tenant (openstack server list).  That IP is then used in your
-`/etc/hosts` to map the fixed DNS aliases required by the ONAP Portal as shown
-below::
-
-  10.12.6.155 portal.api.simpledemo.onap.org
-  10.12.6.155 vid.api.simpledemo.onap.org
-  10.12.6.155 sdc.api.fe.simpledemo.onap.org
-  10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
-  10.12.6.155 sdc.dcae.plugin.simpledemo.onap.org
-  10.12.6.155 portal-sdk.simpledemo.onap.org
-  10.12.6.155 policy.api.simpledemo.onap.org
-  10.12.6.155 aai.api.sparky.simpledemo.onap.org
-  10.12.6.155 cli.api.simpledemo.onap.org
-  10.12.6.155 msb.api.discovery.simpledemo.onap.org
-  10.12.6.155 msb.api.simpledemo.onap.org
-  10.12.6.155 clamp.api.simpledemo.onap.org
-  10.12.6.155 so.api.simpledemo.onap.org
-  10.12.6.155 sdc.workflow.plugin.simpledemo.onap.org
-
-Ensure you've disabled any proxy settings the browser you are using to access
-the portal and then simply access now the new ssl-encrypted URL:
-``https://portal.api.simpledemo.onap.org:30225/ONAPPORTAL/login.htm``
-
-.. note::
-  Using the HTTPS based Portal URL the Browser needs to be configured to accept
-  unsecure credentials.
-  Additionally when opening an Application inside the Portal, the Browser
-  might block the content, which requires to disable the blocking and reloading
-  of the page
-
-.. note::
-  Besides the ONAP Portal the Components can deliver additional user interfaces,
-  please check the Component specific documentation.
-
-.. note::
-
-   | Alternatives Considered:
-
-   -  Kubernetes port forwarding was considered but discarded as it would
-      require the end user to run a script that opens up port forwarding tunnels
-      to each of the pods that provides a portal application widget.
-
-   -  Reverting to a VNC server similar to what was deployed in the Amsterdam
-      release was also considered but there were many issues with resolution,
-      lack of volume mount, /etc/hosts dynamic update, file upload that were
-      a tall order to solve in time for the Beijing release.
-
-   Observations:
-
-   -  If you are not using floating IPs in your Kubernetes deployment and
-      directly attaching a public IP address (i.e. by using your public provider
-      network) to your K8S Node VMs' network interface, then the output of
-      'kubectl -n onap get services | grep "portal-app"'
-      will show your public IP instead of the private network's IP. Therefore,
-      you can grab this public IP directly (as compared to trying to find the
-      floating IP first) and map this IP in /etc/hosts.
 
 .. figure:: ../../resources/images/oom_logo/oomLogoV2-Monitor.png
    :align: right
diff --git a/docs/sections/resources/csv/nodeports.csv b/docs/sections/resources/csv/nodeports.csv
new file mode 100644
index 0000000000..b1c6fb5333
--- /dev/null
+++ b/docs/sections/resources/csv/nodeports.csv
@@ -0,0 +1,62 @@
+NodePort,Component,Service name,targetPort,Port
+30200,VID,vid,8443,8443
+30201,SDNC,sdnc-portal,8443,8443
+30203,SDNC,sdnc-dgbuilder,3100,3000
+30204,SDC,sdc-be-external,8443,8443
+30207,SDC,sdc-fe,9443,9443
+30209,ROBOT,robot,443,443
+30210,AAI,aai-modelloader,8080,8080
+30211,APPC,appc,9191,9090
+30212,PORTAL,portal-sdk,8443,8443
+30218,POLICY,pap,9091,9091
+30219,POLICY,pap,8443,8443
+30220,AAI,aai-sparky-be,8000,8000
+30222,DCAE,xdcae-hv-ves-collector,6061,6061
+30225,PORTAL,portal-app,8443,8443
+30226,DMAAP,message-router-external,3905,3905
+30228,APPC,appc-dgbuilder,3100,3000
+30229,AAI,aai-modelloader,8443,8443
+30230,APPC,appc,8443,8443
+30231,APPC,appc,1830,1830
+30233,AAI,aai,8443,8443
+30234,POMBA*),pomba-kibana,5601,5601
+30242,DMAAP,dmaap-bc,8443,8443
+30248,OOF,oof-osdf,8699,8698
+30249,POMBA*),pomba-data-router,9502,9502
+30251,AAF,aaf-gui,8200,8200
+30253,LOG*),log-kibana,5601,5601
+30254,LOG*),log-es,9200,9200
+30255,LOG*),log-ls,5044,5044
+30256,SDC,sdc-wfd-fe,8443,8443
+30257,SDC,sdc-wfd-be,8443,8443
+30258,CLAMP,clamp-external,2443,2443
+30260,CLI,cli,443,443
+30264,DCAE,sdc-dcae-fe,9444,9444
+30266,DCAE,sdc-dcae-dt,9446,9446
+30267,SDNC,sdnc,8443,8443
+30269,DMAAP,dmaapr-prov,443,8443
+30271,CLI,cli,9090,9090
+30274,EXTAPI,nbi,8443,8443
+30275,OOF,oof-has-api,8091,8091
+30277,SO,so,8080,8080
+30279,AAI,aai-babel,9516,9516
+30283,MSB,msb-iag,443,443
+30284,MSB,msb-eag,443,443
+30288,SNIRO*),sniro-emulator,9999,80
+30289,APPC,appc-cdt,18080,18080
+30290,CLAMP,cdash-kibana,5601,5601
+30297,VNFSDK,refrepo,8703,8703
+30299,POMBA*),pomba-networkdiscovery,8443,9531
+30398,UUI,uui,8443,8443
+30399,UUI,uui-server,8082,8082
+30406,SO,so-vnfm-adapter,9092,9092
+30407,MUSIC,music,8443,8443
+30417,DCAE,xdcae-ves-collector,8443,8443
+30418,DCAE,dashboard,8443,8443
+30420,NETBOX,netbox-nginx,8080,8080
+30478,AWX,awx-web,8080,80
+30490,DMAAP,message-router-kafka-0,9091,9091
+30491,DMAAP,message-router-kafka-1,9091,9091
+30492,DMAAP,message-router-kafka-2,9091,9091
+30494,DMAAP,dmaap-dr-node-external,8443,8443
+30497,CDS,cds-ui,3000,3000
\ No newline at end of file
diff --git a/docs/sections/resources/images/servicemesh/ServiceMesh.png b/docs/sections/resources/images/servicemesh/ServiceMesh.png
new file mode 100644
index 0000000000..7448ff0dc2
--- /dev/null
+++ b/docs/sections/resources/images/servicemesh/ServiceMesh.png
diff --git a/docs/sections/resources/yaml/envoyfilter-case.yaml b/docs/sections/resources/yaml/envoyfilter-case.yaml
new file mode 100644
index 0000000000..c919319ecc
--- /dev/null
+++ b/docs/sections/resources/yaml/envoyfilter-case.yaml
@@ -0,0 +1,40 @@
+apiVersion: networking.istio.io/v1alpha3
+kind: EnvoyFilter
+metadata:
+  name: header-casing
+  namespace: istio-config
+spec:
+  configPatches:
+  - applyTo: CLUSTER
+    match:
+      context: SIDECAR_INBOUND
+    patch:
+      operation: MERGE
+      value:
+        typed_extension_protocol_options:
+          envoy.extensions.upstreams.http.v3.HttpProtocolOptions:
+            '@type': type.googleapis.com/envoy.extensions.upstreams.http.v3.HttpProtocolOptions
+            use_downstream_protocol_config:
+              http_protocol_options:
+                header_key_format:
+                  stateful_formatter:
+                    name: preserve_case
+                    typed_config:
+                      '@type': type.googleapis.com/envoy.extensions.http.header_formatters.preserve_case.v3.PreserveCaseFormatterConfig
+  - applyTo: NETWORK_FILTER
+    match:
+      listener:
+        filterChain:
+          filter:
+            name: envoy.filters.network.http_connection_manager
+    patch:
+      operation: MERGE
+      value:
+        typed_config:
+          '@type': type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager
+          http_protocol_options:
+            header_key_format:
+              stateful_formatter:
+                name: preserve_case
+                typed_config:
+                  '@type': type.googleapis.com/envoy.extensions.http.header_formatters.preserve_case.v3.PreserveCaseFormatterConfig
\ No newline at end of file
diff --git a/docs/sections/resources/yaml/kiali-ingress.yaml b/docs/sections/resources/yaml/kiali-ingress.yaml
new file mode 100644
index 0000000000..44f806203a
--- /dev/null
+++ b/docs/sections/resources/yaml/kiali-ingress.yaml
@@ -0,0 +1,30 @@
+apiVersion: networking.istio.io/v1beta1
+kind: Gateway
+metadata:
+  name: kiali-gateway
+spec:
+  selector:
+    istio: ingressgateway
+  servers:
+    - hosts:
+        - kiali.simpledemo.onap.org
+      port:
+        name: http
+        number: 80
+        protocol: HTTP
+---
+apiVersion: networking.istio.io/v1beta1
+kind: VirtualService
+metadata:
+  name: kiali-service
+spec:
+  hosts:
+    - kiali.simpledemo.onap.org
+  gateways:
+    - kiali-gateway
+  http:
+    - route:
+      - destination:
+          port:
+            number: 20001
+          host: kiali
\ No newline at end of file
diff --git a/docs/sections/resources/yaml/kiali.yaml b/docs/sections/resources/yaml/kiali.yaml
new file mode 100644
index 0000000000..71d86ce265
--- /dev/null
+++ b/docs/sections/resources/yaml/kiali.yaml
@@ -0,0 +1,24 @@
+apiVersion: kiali.io/v1alpha1
+kind: Kiali
+metadata:
+  name: kiali
+  namespace: istio-system
+  annotations:
+    ansible.operator-sdk/verbosity: "1"
+spec:
+  auth:
+    strategy: anonymous
+  istio_component_namespaces:
+    prometheus: monitoring
+  external_services:
+    grafana:
+      in_cluster_url: http://prometheus-stack-grafana.monitoring
+    prometheus:
+      url: http://prometheus-stack-kube-prom-prometheus.monitoring:9090
+    tracing:
+      in_cluster_url: http://istio-query.observability:16686
+  deployment:
+    accessible_namespaces: ["**"]
+    view_only_mode: false
+  server:
+    web_root: "/kiali"
\ No newline at end of file