OOF Integration Changes

Thank you for the very detailed Review Boris.
All changes you had asked have been incorported.

Please take a look and let me know.
Few important points.

All components excep API and Music are services
that do not expose any TCP or HTTP ports. All the NodePort
and serices section areas in each of these component's
values.yaml file have been cleaned. Actually, the service
section do not make sense of these components at all.
They use Music as a distributed Q to receive and push their
tasks/changes.

These include a). Controller b). Data c). Solver and 4). Reservation.

This is why you didn't see any service.yaml files for these.

-------------------------------

Made a single configuration based setup.
All HAS components are now configured through
a single configmap and a single set of configuration
files.

All oof-has components share configurations.
Restructured the charts so that theere is
one parent for oof-has from where properties
can be inherited.

Removed other issues like the make was failing.

All PODs are coming up except data - which depends
on AAI certs - team is looking for that side.

Issue-ID: OPTFRA-22
Change-Id: I4bf36a68fc3636c822f33f55da70ace577c64ac0
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>
Signed-off-by: Anaël Closson <ac2550@intl.att.com>

Removed Urls not needed

Issue-ID: OPTFRA-22
Change-Id: I270de9cbed5f25dd971f40477fb95385a57fba5c
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>

Removed Music IPs

MK:
PS-14: fixing robot testcase by forking the testcase until it is fixed in robot
       adding target port to osdf service.  required to map port 8698:8699

Issue-ID: INT-444
Change-Id: I150e3389aece7fae3b0685647af3a787cc9f267d
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>
Signed-off-by: ac2550 <ac2550@intl.att.com>
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>
Signed-off-by: = <=>
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>
Signed-off-by: Ankitkumar Patel <ankit@research.att.com>
Signed-off-by: Thomas Nelson <tn1381@att.com>
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>
Signed-off-by: Ankitkumar Patel <ankit@research.att.com>
Signed-off-by: Thomas Nelson <tn1381@att.com>
Signed-off-by: Ikram Ikramullah <ikram@research.att.com>
Signed-off-by: Mandeep Khinda <mandeep.khinda@amdocs.com>

69 files changed, 3126 insertions, 4 deletions

diff --git a/kubernetes/onap/requirements.yaml b/kubernetes/onap/requirements.yaml
index 8c9c12845b..98a6e2fa2e 100644
--- a/kubernetes/onap/requirements.yaml
+++ b/kubernetes/onap/requirements.yaml
@@ -84,6 +84,10 @@ dependencies:
     version: ~2.0.0
     repository: '@local'
     condition: portal.enabled
+  - name: oof
+    version: ~2.0.0
+    repository: '@local'
+    condition: oof.enabled
   - name: robot
     version: ~2.0.0
     repository: '@local'
diff --git a/kubernetes/onap/resources/environments/dev.yaml b/kubernetes/onap/resources/environments/dev.yaml
index 651cb9160e..42f8c2fabf 100644
--- a/kubernetes/onap/resources/environments/dev.yaml
+++ b/kubernetes/onap/resources/environments/dev.yaml
@@ -73,6 +73,8 @@ message-router:
   enabled: false
 mock:
   enabled: false
+oof:
+  enabled: false
 msb:
   enabled: false
 multicloud:
@@ -128,4 +130,4 @@ vfc:
 vid:
   enabled: false
 vnfsdk:
-  enabled: false
\ No newline at end of file
+  enabled: false
diff --git a/kubernetes/onap/resources/environments/disable-allcharts.yaml b/kubernetes/onap/resources/environments/disable-allcharts.yaml
index 7e27a316cb..09a8e5ed02 100644
--- a/kubernetes/onap/resources/environments/disable-allcharts.yaml
+++ b/kubernetes/onap/resources/environments/disable-allcharts.yaml
@@ -51,6 +51,8 @@ msb:
   enabled: false
 multicloud:
   enabled: false
+oof:
+  enabled: false
 policy:
   enabled: false
 portal:
@@ -70,4 +72,4 @@ vfc:
 vid:
   enabled: false
 vnfsdk:
-  enabled: false
\ No newline at end of file
+  enabled: false
diff --git a/kubernetes/onap/values.yaml b/kubernetes/onap/values.yaml
index 6107f3d44e..95e38b93c0 100644
--- a/kubernetes/onap/values.yaml
+++ b/kubernetes/onap/values.yaml
@@ -82,6 +82,8 @@ message-router:
   enabled: true
 mock:
   enabled: true
+oof:
+  enabled: true
 msb:
   enabled: true
 multicloud:
diff --git a/kubernetes/oof/Chart.yaml b/kubernetes/oof/Chart.yaml
new file mode 100755
index 0000000000..36d31253c4
--- /dev/null
+++ b/kubernetes/oof/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Optimization Framework
+name: oof
+version: 2.0.0
diff --git a/kubernetes/oof/Makefile b/kubernetes/oof/Makefile
new file mode 100644
index 0000000000..72f97ef44c
--- /dev/null
+++ b/kubernetes/oof/Makefile
@@ -0,0 +1,16 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+make-has:
+	cd charts && helm dep up oof-has
diff --git a/kubernetes/oof/charts/oof-has/Chart.yaml b/kubernetes/oof/charts/oof-has/Chart.yaml
new file mode 100755
index 0000000000..a1ec5ac516
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Homing and Allocation Service
+name: oof-has
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-api/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-api/Chart.yaml
new file mode 100755
index 0000000000..01d4eec0e3
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-api/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Homing and Allocation Servicei - API
+name: oof-has-api
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/NOTES.txt b/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/NOTES.txt
new file mode 100755
index 0000000000..b3622e396a
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/deployment.yaml
new file mode 100755
index 0000000000..2709371cb4
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/deployment.yaml
@@ -0,0 +1,109 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - oof-has-music
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.global.image.optf_has }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+          - python
+          args:
+          - /usr/local/bin/conductor-api
+          - --port={{ .Values.service.internalPort }}
+          - --
+          - --config-file=/usr/local/bin/conductor.conf
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/local/bin/conductor.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: conductor.conf
+          - mountPath: /usr/local/bin/log.conf
+            name: {{ .Values.global.commonConfigPrefix  }}-config
+            subPath: log.conf
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ .Values.global.commonConfigPrefix }}-config
+          configMap:
+            name: {{ .Values.global.commonConfigPrefix  }}-configmap
+            items:
+            - key: conductor.conf
+              path: conductor.conf
+            - key: log.conf
+              path: log.conf
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/service.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/service.yaml
new file mode 100755
index 0000000000..58d1ab68b4
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-api/templates/service.yaml
@@ -0,0 +1,40 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml
new file mode 100755
index 0000000000..6114de329e
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml
@@ -0,0 +1,37 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+service:
+  type: NodePort
+  name: oof-has-api
+  externalPort: 8091
+  internalPort: 8091
+  nodePort: 75
+  portName: oof-has-api
+ingress:
+  enabled: false
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/.helmignore b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/.helmignore
new file mode 100644
index 0000000000..f0c1319444
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/Chart.yaml
new file mode 100644
index 0000000000..501bd99dbb
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: OOF-HAS Cassandra
+name: oof-has-cassandra
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/resources/config/cassandra/docker-entrypoint-initdb.d/zzz_conductor.cql b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/resources/config/cassandra/docker-entrypoint-initdb.d/zzz_conductor.cql
new file mode 100644
index 0000000000..c2593eb1dc
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/resources/config/cassandra/docker-entrypoint-initdb.d/zzz_conductor.cql
@@ -0,0 +1,90 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+CREATE KEYSPACE conductor WITH replication = {'class': 'SimpleStrategy', 'replication_factor': '1'}  AND durable_writes = true;
+
+CREATE TABLE conductor.plans (
+    id text PRIMARY KEY,
+    created bigint,
+    message text,
+    name text,
+    recommend_max int,
+    reservation_counter int,
+    reservation_owner text,
+    solution text,
+    solver_counter int,
+    solver_owner text,
+    status text,
+    template text,
+    timeout int,
+    translation text,
+    translation_counter int,
+    translation_owner text,
+    updated bigint,
+    vector_ts text
+);
+
+CREATE INDEX conductor_plans_index ON conductor.plans(status);
+
+CREATE KEYSPACE conductor_rpc WITH replication = {'class': 'SimpleStrategy', 'replication_factor': '1'}  AND durable_writes = true;
+
+CREATE TABLE conductor_rpc.controller (
+    id text PRIMARY KEY,
+    action text,
+    args text,
+    created bigint,
+    ctxt text,
+    failure text,
+    method text,
+    owner text,
+    response text,
+    status text,
+    updated bigint,
+    vector_ts text
+);
+
+CREATE TABLE conductor_rpc.data (
+    id text PRIMARY KEY,
+    action text,
+    args text,
+    created bigint,
+    ctxt text,
+    failure text,
+    method text,
+    owner text,
+    response text,
+    status text,
+    updated bigint,
+    vector_ts text
+);
+
+INSERT INTO admin.keyspace_master (
+uuid, application_name, is_aaf, is_api, keyspace_name, password,username)
+VALUES ( now(), 'conductor', False, True, 'conductor', 'c0nduct0r', 'conductor');
+
+INSERT INTO admin.keyspace_master (
+uuid, application_name, is_aaf, is_api, keyspace_name, password, username)
+VALUES( now(), 'conductor', False, True, 'conductor_rpc', 'c0nduct0r', 'conductor');
+
+CREATE ROLE IF NOT EXISTS conductor WITH PASSWORD = 'c0nduct0r' AND LOGIN = true;
+
+GRANT ALL PERMISSIONS on KEYSPACE conductor to 'conductor';
+
+GRANT ALL PERMISSIONS on KEYSPACE conductor_rpc to 'conductor';
+
+INSERT INTO conductor.plans (id, created, message, name, recommend_max, solution, status, template,timeout, translation,updated) VALUES('healthcheck',1479482603641,'','foo',1,'{"healthcheck": " healthcheck"}','solved','{"healthcheck": "healthcheck"}',3600,'{"healthcheck": "healthcheck"}',1484324150629);
+
+
+
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/NOTES.txt b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/NOTES.txt
new file mode 100644
index 0000000000..8f907c046c
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/configmap.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/configmap.yaml
new file mode 100644
index 0000000000..e0fec186bb
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/configmap.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-docker-entry-initd
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/cassandra/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
+
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/deployment.yaml
new file mode 100644
index 0000000000..63f85c6640
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/deployment.yaml
@@ -0,0 +1,104 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+      - name: {{ include "common.name" . }}
+        image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        ports:
+        - containerPort: {{ .Values.service.internalPort }}
+        - containerPort: {{ .Values.service.internalPort2 }}
+        - containerPort: {{ .Values.service.internalPort3 }}
+        - containerPort: {{ .Values.service.internalPort4 }}
+        - containerPort: {{ .Values.service.internalPort5 }}
+        {{ if eq .Values.liveness.enabled true }}
+        livenessProbe:
+          exec:
+            command:
+            - /bin/bash
+            - -c
+            - nodetool status | grep $POD_IP | awk '$1!="UN" { exit 1; }'
+          initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.liveness.periodSeconds }}
+        {{ end }}
+        readinessProbe:
+          exec:
+            command:
+            - /bin/bash
+            - -c
+            - nodetool status | grep $POD_IP | awk '$1!="UN" { exit 1; }'
+          initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.readiness.periodSeconds }}
+        env:
+          - name: CASSUSER
+            value: "{{ .Values.config.cassandraUsername }}"
+          - name: CASSPASS
+            value: "{{ .Values.config.cassandraPassword }}"
+          - name: POD_IP
+            valueFrom:
+              fieldRef:
+                fieldPath: status.podIP
+        volumeMounts:
+        - mountPath: /etc/localtime
+          name: localtime
+          readOnly: true
+        - name: cassandra-docker-entrypoint-initdb
+          mountPath: /docker-entrypoint-initdb.d/zzz_conductor.cql
+          subPath: zzz_conductor.cql
+        - name: {{ include "common.fullname" . }}-data
+          mountPath: /var/lib/cassandra/data
+        resources:
+{{ toYaml .Values.resources | indent 12 }}
+      {{- if .Values.nodeSelector }}
+      nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+      {{- end -}}
+      {{- if .Values.affinity }}
+      affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+      {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: cassandra-docker-entrypoint-initdb
+          configMap:
+            name: {{ include "common.fullname" . }}-docker-entry-initd
+      {{- if .Values.persistence.enabled }}
+        - name: {{ include "common.fullname" . }}-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+      {{- else }}
+          emptyDir: {}
+      {{- end }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/pv.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/pv.yaml
new file mode 100644
index 0000000000..184728f8ad
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/pv.yaml
@@ -0,0 +1,37 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/pvc.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/pvc.yaml
new file mode 100644
index 0000000000..e27c3311e9
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/pvc.yaml
@@ -0,0 +1,48 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+  selector:
+    matchLabels:
+      name: {{ include "common.fullname" . }}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+  storageClassName: ""
+{{- else }}
+  storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/service.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/service.yaml
new file mode 100644
index 0000000000..12174314d5
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/templates/service.yaml
@@ -0,0 +1,69 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.service.portName }}2
+    - port: {{ .Values.service.externalPort3 }}
+      targetPort: {{ .Values.service.internalPort3 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort3 }}
+      name: {{ .Values.service.portName }}3
+    - port: {{ .Values.service.externalPort4 }}
+      targetPort: {{ .Values.service.internalPort4 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort4 }}
+      name: {{ .Values.service.portName }}4
+    - port: {{ .Values.service.externalPort5 }}
+      targetPort: {{ .Values.service.internalPort5 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort5 }}
+      name: {{ .Values.service.portName }}5
+
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.service.portName }}2
+    - port: {{ .Values.service.externalPort3 }}
+      targetPort: {{ .Values.service.internalPort3 }}
+      name: {{ .Values.service.portName }}3
+    - port: {{ .Values.service.externalPort4 }}
+      targetPort: {{ .Values.service.internalPort4 }}
+      name: {{ .Values.service.portName }}4
+    - port: {{ .Values.service.externalPort5 }}
+      targetPort: {{ .Values.service.internalPort5 }}
+      name: {{ .Values.service.portName }}5
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml
new file mode 100644
index 0000000000..9bb5af376f
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml
@@ -0,0 +1,93 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+global: # global defaults
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  persistence: {}
+
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/music/cassandra_music:3.0.0
+pullPolicy: Always
+
+# application configuration
+config:
+  cassandraUsername: root
+  cassandraPassword: Aa123456
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+
+  ## A manually managed Persistent Volume and Claim
+  ## Requires persistence.enabled: true
+  ## If defined, PVC must be created manually before volume will be bound
+  # existingClaim:
+  volumeReclaimPolicy: Retain
+
+  ## database data Persistent Volume Storage Class
+  ## If defined, storageClassName: <storageClass>
+  ## If set to "-", storageClassName: "", which disables dynamic provisioning
+  ## If undefined (the default) or set to null, no storageClassName spec is
+  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+  ##   GKE, AWS & OpenStack)
+  ##
+  # storageClass: "-"
+  accessMode: ReadWriteMany
+  size: 2Gi
+  mountPath: /dockerdata-nfs
+  mountSubPath: oof/cassandra/data
+service:
+  type: ClusterIP
+  name: oof-has-cassandra
+  portName: oof-has-cassandra
+  externalPort: 9160
+  internalPort: 9160
+  externalPort2: 7000
+  internalPort2: 7000
+  externalPort3: 7001
+  internalPort3: 7001
+  externalPort4: 7199
+  internalPort4: 7199
+  externalPort5: 9042
+  internalPort5: 9042
+
+ingress:
+  enabled: false
+
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-controller/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/Chart.yaml
new file mode 100755
index 0000000000..d0e124e2ca
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Homing and Allocation Sservice - Controller
+name: oof-has-controller
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-controller/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/templates/deployment.yaml
new file mode 100755
index 0000000000..5535f90631
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - oof-has-music
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.global.image.optf_has }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+          - python
+          args:
+          - /usr/local/bin/conductor-controller
+          - --config-file=/usr/local/bin/conductor.conf
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/local/bin/conductor.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: conductor.conf
+          - mountPath: /usr/local/bin/log.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: log.conf
+          - mountPath: /usr/local/bin/healthy.sh
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: healthy.sh
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ .Values.global.commonConfigPrefix }}-config
+          configMap:
+            name: {{ .Values.global.commonConfigPrefix }}-configmap
+            items:
+            - key: conductor.conf
+              path: conductor.conf
+            - key: log.conf
+              path: log.conf
+            - key: healthy.sh
+              path: healthy.sh
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml
new file mode 100755
index 0000000000..57c56d5e44
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml
@@ -0,0 +1,30 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ingress:
+  enabled: false
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-data/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-data/Chart.yaml
new file mode 100755
index 0000000000..37d9f0dd8c
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-data/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Homing and Allocation Service - Data Component
+name: oof-has-data
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-data/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-data/templates/deployment.yaml
new file mode 100755
index 0000000000..4effba825e
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-data/templates/deployment.yaml
@@ -0,0 +1,129 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - oof-has-music
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.global.image.optf_has }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+          - python
+          args:
+          - /usr/local/bin/conductor-data
+          - --config-file=/usr/local/bin/conductor.conf
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/local/bin/conductor.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: conductor.conf
+          - mountPath: /usr/local/bin/log.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config 
+            subPath: log.conf
+          - mountPath: /usr/local/bin/healthy.sh
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: healthy.sh 
+          - mountPath: /usr/local/bin/aai_cert.cer
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: aai_cert.cer
+          - mountPath: /usr/local/bin/aai_key.key
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: aai_key.key
+          - mountPath: /usr/local/bin/bundle.pem
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: bundle.pem
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ .Values.global.commonConfigPrefix }}-config
+          configMap:
+            name: {{ .Values.global.commonConfigPrefix }}-configmap
+            items:
+            - key: conductor.conf
+              path: conductor.conf
+            - key: log.conf
+              path: log.conf
+            - key: healthy.sh
+              path: healthy.sh 
+            - key: aai_cert.cer
+              path: aai_cert.cer
+            - key: aai_key.key
+              path: aai_key.key
+            - key: bundle.pem
+              path: bundle.pem
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml
new file mode 100755
index 0000000000..57c56d5e44
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml
@@ -0,0 +1,30 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ingress:
+  enabled: false
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/Chart.yaml
new file mode 100644
index 0000000000..a6653e4781
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP OOF-MUSIC Container
+name: oof-has-music
+version: 2.5.3
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/requirements.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/requirements.yaml
new file mode 100644
index 0000000000..1e8f788318
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~2.0.0
+    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/resources/config/music.properties b/kubernetes/oof/charts/oof-has/charts/oof-has-music/resources/config/music.properties
new file mode 100644
index 0000000000..fe338a7e87
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/resources/config/music.properties
@@ -0,0 +1,27 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+my.public.ip=localhost
+all.public.ips=localhost
+my.id=0
+all.ids=0
+#######################################
+# Optional current values are defaults
+#######################################
+zookeeper.host=oof-has-zk
+cassandra.host=oof-has-cassandra
+cassandra.user=root
+cassandra.password=Aa123456
+# AAF Endpoint if using AAF
+aaf.endpoint.url=https://aaf.api.simpledemo.onap.org
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/resources/config/startup.sh b/kubernetes/oof/charts/oof-has/charts/oof-has-music/resources/config/startup.sh
new file mode 100755
index 0000000000..1648f9a1b0
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/resources/config/startup.sh
@@ -0,0 +1,35 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+OUT=$(curl -o /dev/null -s -w "%{http_code}\n"  \
+  http://localhost:8080/MUSIC/rest/v2/admin/onboardAppWithMusic \
+  -H 'Cache-Control: no-cache' \
+  -H 'Content-Type: application/json' \
+  -H 'Postman-Token: 705d4a9d-aaf2-40b4-914a-e0ce1a79534c' \
+  -d '{
+   "appname": "conductor",
+   "userId" : "conductor",
+   "isAAF"  : false,
+   "password" : "c0nduct0r"
+}
+')
+
+if [ ${OUT} = "200" ]; then
+    echo "Success"
+    echo 1 > /tmp/onboarded
+    exit 0;
+else
+    echo "Failure"
+    exit 1;
+fi
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/NOTES.txt b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/NOTES.txt
new file mode 100644
index 0000000000..70f97db28e
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/configmap.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/configmap.yaml
new file mode 100644
index 0000000000..4ccc7cc526
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/configmap.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/deployment.yaml
new file mode 100644
index 0000000000..17114d6480
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/deployment.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+# War Container
+       - name: "{{ include "common.name" . }}-war"
+         image: "{{ include "common.repository" . }}/{{ .Values.warImage }}"  #"
+         command: ["cp","/app/MUSIC.war","/webapps"]
+         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+         ports:
+         volumeMounts:
+         - mountPath: /webapps
+           name: shared-data
+      containers:
+      # Tomcat Container
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"   #"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/local/tomcat/webapps
+            name: shared-data
+          - name: properties-music
+            mountPath: /opt/app/music/etc/music.properties
+            subPath: music.properties
+          - name: properties-music
+            mountPath: /opt/app/music/startup.sh
+            subPath: startup.sh
+      volumes:
+        - name: shared-data
+          emptyDir: {}
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: properties-music
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/service.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/service.yaml
new file mode 100644
index 0000000000..58d1ab68b4
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/templates/service.yaml
@@ -0,0 +1,40 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml
new file mode 100644
index 0000000000..c804cae92f
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml
@@ -0,0 +1,73 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repository: nexus3.onap.org:10001
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:1.0.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: library/tomcat:8.5
+pullPolicy: Always
+warImage: onap/music/music:2.5.3
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  usernameCassandra: cassandra1
+  passwordCassandra: cassandra1
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  type: NodePort
+  name: oof-has-music
+  externalPort: 8080
+  internalPort: 8080
+  nodePort: 76
+  portName: oof-has-music
+ingress:
+  enabled: false
+
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/Chart.yaml
new file mode 100755
index 0000000000..e74c556dce
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Homing and Allocation Sevice - Reservation Component
+name: oof-has-reservation
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/templates/deployment.yaml
new file mode 100755
index 0000000000..8b610219b0
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - oof-has-music
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.global.image.optf_has }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+          - python
+          args:
+          - /usr/local/bin/conductor-reservation
+          - --config-file=/usr/local/bin/conductor.conf
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          readinessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          {{ end -}}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/local/bin/conductor.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: conductor.conf
+          - mountPath: /usr/local/bin/log.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: log.conf
+          - mountPath: /usr/local/bin/healthy.sh
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: healthy.sh
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ .Values.global.commonConfigPrefix }}-config
+          configMap:
+            name: {{ .Values.global.commonConfigPrefix }}-configmap
+            items:
+            - key: conductor.conf
+              path: conductor.conf
+            - key: log.conf
+              path: log.conf
+            - key: healthy.sh
+              path: healthy.sh
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml
new file mode 100755
index 0000000000..57c56d5e44
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml
@@ -0,0 +1,30 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ingress:
+  enabled: false
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-solver/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/Chart.yaml
new file mode 100755
index 0000000000..ebad46b7a7
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Homing and Allocation Service - Solver Component
+name: oof-has-solver
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-solver/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/templates/deployment.yaml
new file mode 100755
index 0000000000..9f9b4dbae5
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - oof-has-music
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.global.image.optf_has }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          command:
+          - python
+          args:
+          - /usr/local/bin/conductor-solver
+          - --config-file=/usr/local/bin/conductor.conf
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            exec:
+              command:
+              - cat
+              - /usr/local/bin/healthy.sh
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/local/bin/conductor.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: conductor.conf
+          - mountPath: /usr/local/bin/log.conf
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: log.conf
+          - mountPath: /usr/local/bin/healthy.sh
+            name: {{ .Values.global.commonConfigPrefix }}-config
+            subPath: healthy.sh
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ .Values.global.commonConfigPrefix }}-config
+          configMap:
+            name: {{ .Values.global.commonConfigPrefix }}-configmap
+            items:
+            - key: conductor.conf
+              path: conductor.conf
+            - key: log.conf
+              path: log.conf
+            - key: healthy.sh
+              path: healthy.sh
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml
new file mode 100755
index 0000000000..57c56d5e44
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml
@@ -0,0 +1,30 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ingress:
+  enabled: false
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/Chart.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/Chart.yaml
new file mode 100644
index 0000000000..95033bb35d
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP OOF Zookeeper
+name: oof-has-zookeeper
+version: 2.0.0
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/NOTES.txt b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/NOTES.txt
new file mode 100644
index 0000000000..8f907c046c
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/deployment.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/deployment.yaml
new file mode 100644
index 0000000000..c161f73231
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/deployment.yaml
@@ -0,0 +1,70 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+        - name: {{ include "common.name" . }}
+          image: {{ include "common.repository" . }}/{{ .Values.image }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/service.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/service.yaml
new file mode 100644
index 0000000000..4e4c1c8358
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/templates/service.yaml
@@ -0,0 +1,38 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.externalPort }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+    {{- end}}
+      name: {{ .Values.service.portName }}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml
new file mode 100644
index 0000000000..7a069c6685
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml
@@ -0,0 +1,51 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+global: # global defaults
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  persistence: {}
+
+
+# application image
+repository: nexus3.onap.org:10001
+image: zookeeper:3.4
+pullPolicy: Always
+
+# default number of instances
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+service:
+  type: ClusterIP
+  name: oof-has-zk
+  externalPort: 2181
+  internalPort: 2181
+  portName: oof-has-zookeeper
+ingress:
+  enabled: false
+resources: {}
diff --git a/kubernetes/oof/charts/oof-has/requirements.yaml b/kubernetes/oof/charts/oof-has/requirements.yaml
new file mode 100755
index 0000000000..ce82a2f838
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~2.0.0
+    repository: '@local'
diff --git a/kubernetes/oof/charts/oof-has/resources/config/aai_cert.cer b/kubernetes/oof/charts/oof-has/resources/config/aai_cert.cer
new file mode 100755
index 0000000000..4c6eb916e6
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/aai_cert.cer
@@ -0,0 +1,25 @@
+-----BEGIN CERTIFICATE-----

+MIIEKjCCAxKgAwIBAgIBHjANBgkqhkiG9w0BAQsFADBHMQswCQYDVQQGEwJVUzEN

+MAsGA1UECgwET05BUDEOMAwGA1UECwwFT1NBQUYxGTAXBgNVBAMMEGludGVybWVk

+aWF0ZUNBXzEwHhcNMTgwNDI1MTIxMzAxWhcNMTkwNDIwMTIxMzAxWjBtMQswCQYD

+VQQGEwJVUzENMAsGA1UECgwET05BUDEZMBcGA1UECwwQb29mQG9vZi5vbmFwLm9y

+ZzEOMAwGA1UECwwFT1NBQUYxJDAiBgNVBAMMG29vZi5hcGkuc2ltcGxlZGVtby5v

+bmFwLm9yZzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBANGpQUtgLXG3

+dVikd/QC2Q24wzeTOeZzbx3PnidNYZT5K0sJ/TdnZF6O/4+9gXQ6AQS2Q8wfQ009

+MQAA5vhUaq5yZ2K+XAtEFGln1TxTFpGu3WDOwQ800Vw18Dk8WidrkzDJv489Bn1f

+SSaPC0IaRB0K1d8BD63ZHgsuEY8lt31DX2wFWJcfN9mxNDzuLTZoLxtxKsedoZKH

+rsOOILwXOhwuunfx40i6RQN/pFX6C2i8dtOA5OwUm9Q1RrZ2Tv1Uf4IURriH6bfZ

+5n50yxTuL22TMYXsF/ohrdgwacuC0aV9ZSGhIZUJPyHVg7+QTBioHmoUJInVKuIx

+kkC4lENbLYUCAwEAAaOB+jCB9zAJBgNVHRMEAjAAMBEGCWCGSAGG+EIBAQQEAwIG

+wDAzBglghkgBhvhCAQ0EJhYkT3BlblNTTCBHZW5lcmF0ZWQgU2VydmVyIENlcnRp

+ZmljYXRlMB0GA1UdDgQWBBQwbU5oHU2iYHCoVz4hFCvBW59cdTBUBgNVHSMETTBL

+gBQd5lldG54KOKRipsGF8/PP1vGX6qEwpC4wLDEOMAwGA1UECwwFT1NBQUYxDTAL

+BgNVBAoMBE9OQVAxCzAJBgNVBAYTAlVTggEBMA4GA1UdDwEB/wQEAwIF4DAdBgNV

+HSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwDQYJKoZIhvcNAQELBQADggEBADEa

+0VuxoFIygeQTqlizpHNwfApPmlAVSKDTWuEu4rhJs8GT61EuWZQPygXEUHCYmGvJ

+GMwEGGIDGiQqxMqlqng46gksNJbi1ktXr6Du18qW7gziUd84ve8KcecjZru1Sk1e

+UJ/6WEQVE17CHKcnzQZsMDakgP+61VgKbk5NlkeF/Qh4L6/3jY7g+xoXqaId5RT9

+BetmH/cMsj33lxQTs0fcXTbAQd6BX5ug854OJ1mU4ngJnNBdmn9Ow1bB71ohf5Xv

+OEYX8+khjgjlmM0u1hBRL4qViv3y2Gzhpm1M8cETMDj4g0zIJytzIYMxO8XvDPCF

+YmVZHXJDLsCogSOmmh0=

+-----END CERTIFICATE-----
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/resources/config/aai_key.key b/kubernetes/oof/charts/oof-has/resources/config/aai_key.key
new file mode 100755
index 0000000000..246ff6d8cb
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/aai_key.key
@@ -0,0 +1,30 @@
+-----BEGIN ENCRYPTED PRIVATE KEY-----

+MIIFDjBABgkqhkiG9w0BBQ0wMzAbBgkqhkiG9w0BBQwwDgQIvxjZPeQVkRACAggA

+MBQGCCqGSIb3DQMHBAhWqwQCjZFCrASCBMjWG5wsC1WFJISJ5odMHzYOWOKLpaDP

+7a/dxnBrV6gId/DTmzoqtiBCmQRqhnUuYok98DNUFGjR9JqztNNOf5eslzqCugsh

+zVwCvsJYKvxxJ4Q8tow3DKx28I6EmOvwudMsL9c30OxpEWdlWmyFimu5JDdDvWUH

+S0fWKebQETZ7lptiRX2IXhC3Ye6Wu/DowDYc5L4Z/Q8nwncMB3n2ntMX10pBrura

+15/R18AvG5cDwcasTXz5WKIB/K2onvJfW0so2M8jApu2DF4MpEIN9Z973uTNFXcL

+dgHKWtIl2WO38coedaXUILgsxLSSU27TG4F+7QMGjiKXUSWjN9+TD+8zWye/9OIW

+qfVtoh+n7lWtzC3Axo1OmPInCkFb+I7QaDsJgsUn+ZWap7FVJFrYiz20UTzYYgAK

+OukCgKiJTHOhTT1k0km34ROPmqOk6mH7IkioUSTmoP362RpIVTbKv2e5GKzhYfkk

+27W3RRG/qoZLUTU2AaAyoGZlzXDkBFw2g4vxnhcfHeXX6jyJyQWOOOeRJ5B6uc+Y

+4XmKKJvq5pFlxUDmVCZLRzjwpvYPTQwTQQ9t7kEZFI8B7TMkDqv62YlXyoWNDwPq

+yLvDwPDicx33AZor8N/eDgIOE+TXQ0vEyphf0c9OcgneeJmEtn7IskEahv32ruMQ

+uFAAuIUmQfXPNMXu3MYIUItvZDm3RUk3YJDj9c8YtvxDlzLytHu5QYJ3v7rvo+mG

+XKwmnZouaNRLw5Y7Mff07BuTPuttyNadacuJtUjvv8qVOIeuxQ7nku6yqKKLTeJr

+8E4/tYyZ15FIo3hWi16h3zyZ9LiHhhe7d2XYSVMuzuD4jkIdHbdgiKsCJn9mI5PF

+VpDF34w1Fjwv7Gu32MRMpJijAW10ENaP1O2izr9l8jwo+CLgi5qa6a2YTYAZooqt

+UjTLfEIQKbwFbq5L9Eb1uRw1lRR9SxcxdNQdY+mtx0x2BSmXVUEcyi6OG/8Lzf/1

+9VoE5UPfhSE7ogfbL8eraFlQmKL8f3h3Jx/XDvvKC8YXxgooEhV0BsofXmLdF0BK

+bhXR1/JptLz8CJjtlBWQkmqj+ONOHFA9/4YHMNn5T1PBLNzQCZSjQXrDKxowLDsI

+ozUyZ080c2LrJCf6zj6+fB3LDvHYfJ6LnYASCHJlNS0NVmRPiYB/dmoqF/iyAEjp

+cKUUrbhs6U95aPMo0pPSCuhLKiibCo3Vz/9dvGb7pr6aj/ehOjrtKtGlYukBqNkS

+RQK2kkL8IO+iPWs3aCnEhfeS+wNBMAtI/TEw6As2zseyb3/SylHjek4s1gs9MPdw

+c3o2ArwMzmP0sfFIjYz+AyQm+5i/LSnkNjG0OU9ekGXy7Z4HAcko2Dv8/SmOVapP

+cf8c55RUDlYJh9Ltn0W5fuNA6dykV7f9s8BIrZcnzTN+lifNhNlEYYcmyZwlCcX4

+NBLoH+ENW+Q7+nuhGcf52j/XgTaPZ0Eec8ZJdK7FzVDN4DWKM4KHD7DgpkOR7TZl

+IKGNtdvb3SaGG83YlJhRkkr0C2KvB0Mz2dkAhOKX3NkBr5fY62IvuMdqD7VDjGAw

+h/GBn0k5+gpVP0Uh6yWEla3CjM9GnUuMVcwIUAYSeW2rFu4iapK0gBwguR91cM1N

+MA8=

+-----END ENCRYPTED PRIVATE KEY-----

diff --git a/kubernetes/oof/charts/oof-has/resources/config/bundle.pem b/kubernetes/oof/charts/oof-has/resources/config/bundle.pem
new file mode 100755
index 0000000000..60121e751b
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/bundle.pem
@@ -0,0 +1,26 @@
+-----BEGIN CERTIFICATE-----

+MIIEVDCCAjygAwIBAgIBATANBgkqhkiG9w0BAQsFADAsMQ4wDAYDVQQLDAVPU0FB

+RjENMAsGA1UECgwET05BUDELMAkGA1UEBhMCVVMwHhcNMTgwNDA1MTQxNTQwWhcN

+MTgwNjA0MTQxNTQwWjBHMQswCQYDVQQGEwJVUzENMAsGA1UECgwET05BUDEOMAwG

+A1UECwwFT1NBQUYxGTAXBgNVBAMMEGludGVybWVkaWF0ZUNBXzEwggEiMA0GCSqG

+SIb3DQEBAQUAA4IBDwAwggEKAoIBAQCY3YPA/YQdz4kaZQzdRzWNjmn33WYAWZ8+

+EIz3PhkEzk7M1q9N7Icx2LvozMj4VH0yGz/HYlliHhw26ZRsjYMSR8zATsXl4oW9

+w9BrjuyvM3w8Ptxe8WbUFF9LJDGyXPeVvcXVo0iyh3QYPWC/AWmomN19MvBFN5vH

+AvEG/7qtonViNfISW9Gr9LpXB0foCmUDBu/lV+SwRGajoCPqdZhZ6/L6/yqDvha2

+wsML/UZXlGhXAedt/xOKmT/dSXx/I0vWBVp6Tq4zu87yCvd+I6Tpa5HjttA2I5EV

+zdHX+JYBPBBcVCyO9YQOYjJuoVDE4D5etY6dEipKG/KZF/rqAoqZAgMBAAGjZjBk

+MB0GA1UdDgQWBBQd5lldG54KOKRipsGF8/PP1vGX6jAfBgNVHSMEGDAWgBRTVTPy

+S+vQUbHBeJrBKDF77+rtSTASBgNVHRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQE

+AwIBhjANBgkqhkiG9w0BAQsFAAOCAgEAmgeiitBDi/YEqFh2Cqp0VIEqw8hiuV87

+rADQWMK4hv5WXl3KJTjFAnWsYFUKrm6s1jNH16FyGExUQgwggob0Vt+MHiUs36jU

+kyret/uE5qrjz+/J+i2XG6s1oKcDRVD/jU4qBygZWFBMuwl7sz8IEvaYXGM43s96

+Du3UF9E+V3aMppqkGWz6MnrTmANnWAlDAMeifcoexjrpxiKbp8f49HX1UzwFoeEg

+RnVwNqgDWT66yGV6mbNl6FpE/U81RpCRY1ZJDeVTxbqIaG/UPV4hpQ+BEVBDF+cb

+rGsvsNYYpWx5srIQ7WtGKIlaDFbfWPwnHDHegzr8ypAS3KNWULE+QXCbHWtB+b0Y

+WhP/2F6Jjb+ByvJqQoE+nHEYBeUOZUUZC4IuQFNJ5Wy5P0CNXdheiWhdrBmG02Gy

+KMi0FJx6BEoWM2xcdl6bn5j9mhF4TX7zgepNWlgTra4Z8Oz8iqbQk33/s2OKM4ic

+6ZezUYhNp+MuUt4Se+ufNcGV65jnUKeROtWzNLwP+xwglEFlG8aNiAORthd7QJuT

+Ey2cX7H7f38ENQ5YCriUk1nVLO9F66l/rNRzYZgQzRI3IvDW8vyM2TLW2mcZNsaf

+qjFMcCDweV2FRb8eTbmWzzB2/xTVpGzVJqzwgE+U7UtJx5CZS3wPkvXuEgvcg1tY

+m1r4NGYFvLM=

+-----END CERTIFICATE-----
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/resources/config/conductor.conf b/kubernetes/oof/charts/oof-has/resources/config/conductor.conf
new file mode 100755
index 0000000000..4d32deea33
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/conductor.conf
@@ -0,0 +1,357 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+[DEFAULT]
+
+#
+# From conductor
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+
+# Music keyspace for content (string value)
+keyspace = conductor
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+debug = true
+
+# DEPRECATED: If set to false, the logging level will be set to WARNING instead
+# of the default INFO level. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#verbose = true
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+# log_config_append = /usr/local/bin/log.conf
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+
+[aai]
+
+#
+# From conductor
+#
+
+# Interval with which to refresh the local cache, in minutes. (integer value)
+cache_refresh_interval = 1
+complex_cache_refresh_interval = 60
+
+# Data Store table prefix. (string value)
+#table_prefix = aai
+
+# Base URL for A&AI, up to and not including the version, and without a
+# trailing slash. (string value)
+server_url = https://oof.api.simpledemo.onap.org:8443/aai
+
+# The version of A&AI in v# format. (string value)
+server_url_version = v11
+
+# SSL/TLS certificate file in pem format. This certificate must be registered
+# with the A&AI endpoint. (string value)
+certificate_file = /usr/local/bin/aai_cert.cer
+
+# Private Certificate Key file in pem format. (string value)
+certificate_key_file = /usr/local/bin/aai_key.key
+
+# Certificate Authority Bundle file in pem format. Must contain the appropriate
+# trust chain for the Certificate file. (string value)
+#certificate_authority_bundle_file = /opt/app/conductor/etc/certs/ca_bundle.pem
+certificate_authority_bundle_file =/usr/local/bin/bundle.pem
+
+[api]
+
+#
+# From conductor
+#
+
+# Toggle Pecan Debug Middleware. (boolean value)
+#pecan_debug = false
+
+# Default maximum number of items returned by API request. (integer value)
+# Minimum value: 1
+#default_api_return_limit = 100
+
+[conductor_api]
+
+# Basic Authentication Username (string value)
+username = admin1
+
+# Basic Authentication Password (string value)
+password = plan.15
+
+basic_auth_secure = False
+
+[controller]
+
+#
+# From conductor
+#
+
+# Timeout for planning requests. Default value is 10. (integer value)
+# Minimum value: 1
+timeout = 200
+
+# Maximum number of result sets to return. Default value is 1. (integer value)
+# Minimum value: 1
+#limit = 1
+
+# Number of workers for controller service. Default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Time between checking for new plans. Default value is 1. (integer value)
+# Minimum value: 1
+#polling_interval = 1
+concurrent = true
+
+
+[inventory_provider]
+
+#
+# From conductor
+#
+
+# Extensions list to use (list value)
+#extensions = aai
+
+
+[messaging_server]
+
+#
+# From conductor
+#
+
+# Music keyspace for messages (string value)
+keyspace = conductor_rpc
+
+# Wait interval while checking for a message response. Default value is 1
+# second. (integer value)
+# Minimum value: 1
+#check_interval = 1
+
+# Overall message response timeout. Default value is 10 seconds. (integer
+# value)
+# Minimum value: 1
+timeout = 300
+
+# Number of workers for messaging service. Default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Time between checking for new messages. Default value is 1. (integer value)
+# Minimum value: 1
+#polling_interval = 1
+
+# Log debug messages. Default value is False. (boolean value)
+#debug = false
+
+
+[music_api]
+
+#
+# From conductor
+#
+music_new_version = True
+# Base URL for Music REST API without a trailing slash. (string value)
+server_url = http://oof-has-music:8080/MUSIC/rest/v2
+version = v2
+music_version = "2.5.3"
+aafuser = conductor
+aafpass = c0nduct0r
+aafns = conductor
+
+# DEPRECATED: List of hostnames (round-robin access) (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Use server_url instead
+#hostnames = <None>
+
+# DEPRECATED: Port (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Use server_url instead
+#port = <None>
+
+# DEPRECATED: Path (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Use server_url instead
+#path = <None>
+
+# Lock timeout (integer value)
+#lock_timeout = 10
+replication_factor = 1
+# Log debug messages. Default value is False. (boolean value)
+#debug = false
+
+# Use mock API (boolean value)
+#mock = false
+
+# Socket connection timeout (floating point value)
+connect_timeout = 3.05
+
+# Socket read timeout (floating point value)
+read_timeout = 12.05
+
+
+
+[sdnc]
+
+#
+# From conductor
+#
+
+# Interval with which to refresh the local cache, in minutes. (integer value)
+#cache_refresh_interval = 1440
+
+# Data Store table prefix. (string value)
+#table_prefix = sdnc
+
+# Base URL for SDN-C, up to and including the version. (string value)
+server_url = https://sdncodl-conexus-e2e.ecomp.cci.att.com:8543/restconf/
+
+# Basic Authentication Username (string value)
+username = admin
+
+# Basic Authentication Password (string value)
+password = sdnc.15
+
+
+[service_controller]
+
+#
+# From conductor
+#
+
+# Extensions list to use (list value)
+#extensions = sdnc
+
+
+[solver]
+
+#
+# From conductor
+#
+
+# Number of workers for solver service. Default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Set to True when solver will run in active-active mode. When set to False,
+# solver will restart any orphaned solving requests at startup. (boolean value)
+#concurrent = false
+concurrent = true
+
+
+
+[reservation]
+concurrent = true
+
diff --git a/kubernetes/oof/charts/oof-has/resources/config/healthy.sh b/kubernetes/oof/charts/oof-has/resources/config/healthy.sh
new file mode 100755
index 0000000000..9b53975d63
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/healthy.sh
@@ -0,0 +1,29 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#!/bin/bash
+
+# Controller is a process that reads from Music Q
+# It uses no ports (TCP or HTTP). The PROB will check
+# if the controller process exists or not. In case
+# it exists, it will send 0, else send 1 so k8s can i
+# restart the container
+
+pid="$(pgrep -f '/usr/local/bin/conductor')"
+if [ -z "$pid" ]
+then
+   echo 1
+else
+   echo 0
+fi
diff --git a/kubernetes/oof/charts/oof-has/resources/config/log.conf b/kubernetes/oof/charts/oof-has/resources/config/log.conf
new file mode 100755
index 0000000000..4dc2793c2c
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/log.conf
@@ -0,0 +1,78 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+[loggers]
+keys=root
+
+[handlers]
+keys=trfhand,consoleHandler,audithand,metrichand,errhand,debughand
+
+[logger_root]
+level=NOTSET
+handlers=trfhand,consoleHandler,audithand,metrichand,errhand,debughand
+
+[handler_consoleHandler]
+class=StreamHandler
+level=NOTSET
+formatter=generic
+args=(sys.stdout,)
+
+[handler_trfhand]
+class=handlers.TimedRotatingFileHandler
+level=NOTSET
+formatter=generic
+args=('application.log','midnight', 1, 10)
+
+[handler_audithand]
+class=handlers.TimedRotatingFileHandler
+level=INFO
+formatter=audit
+args=('audit.log', 'midnight', 1, 10)
+
+[handler_metrichand]
+class=handlers.TimedRotatingFileHandler
+level=INFO
+formatter=metric
+args=('metric.log','midnight', 1, 10)
+
+[handler_errhand]
+class=handlers.TimedRotatingFileHandler
+level=ERROR
+formatter=error
+args=('error.log','midnight', 1, 10)
+
+[handler_debughand]
+class=handlers.TimedRotatingFileHandler
+level=DEBUG
+formatter=generic
+args=('debug.log','midnight', 1, 10)
+
+[formatters]
+keys=generic,audit,metric,error
+
+[formatter_audit]
+format=%(asctime)s|%(asctime)s|00000000-0000-0000-0000-000000000000||%(thread)d||Conductor|N/A|COMPLETE|200|sucessful||%(levelname)s|||0|%(module)s|||||||||%(name)s : [-] %(message)s
+datefmt=
+
+[formatter_metric]
+format=%(asctime)s|%(asctime)s|00000000-0000-0000-0000-000000000000||%(thread)d||Conductor|N/A|N/A|N/A|COMPLETE|200|sucessful||%(levelname)s|||0|%(module)s||||||||||%(name)s : [-] %(message)s
+datefmt=
+
+[formatter_error]
+format=%(asctime)s|00000000-0000-0000-0000-000000000000|%(thread)d|Conductor|N/A|N/A|N/A|ERROR|500|N/A|%(name)s : [-] %(message)s
+datefmt=
+
+[formatter_generic]
+format=%(asctime)s||%(thread)d|%(levelname)s|%(module)s|%(name)s: [-] %(message)s
+datefmt=
diff --git a/kubernetes/oof/charts/oof-has/resources/config/log/filebeat.yml b/kubernetes/oof/charts/oof-has/resources/config/log/filebeat.yml
new file mode 100755
index 0000000000..7c8ddec2c3
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/resources/config/log/filebeat.yml
@@ -0,0 +1,31 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
diff --git a/kubernetes/oof/charts/oof-has/templates/configmap.yaml b/kubernetes/oof/charts/oof-has/templates/configmap.yaml
new file mode 100755
index 0000000000..78e63d4435
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/templates/configmap.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ .Values.global.commonConfigPrefix }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/values.yaml b/kubernetes/oof/charts/oof-has/values.yaml
new file mode 100755
index 0000000000..52428bdd12
--- /dev/null
+++ b/kubernetes/oof/charts/oof-has/values.yaml
@@ -0,0 +1,34 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:1.0.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+  repository: nexus3.onap.org:10001
+  commonConfigPrefix: onap-oof-has
+  image:
+    readiness: oomk8s/readiness-check:1.1.0
+    optf_has: onap/optf-has:1.1.1
+    filebeat: docker.elastic.co/beats/filebeat:5.5.0
+
+nsPrefix: onap
+pullPolicy: Always
+nodePortPrefix: 302
+dataRootDir: /dockerdata-nfs
diff --git a/kubernetes/oof/requirements.yaml b/kubernetes/oof/requirements.yaml
new file mode 100755
index 0000000000..ce82a2f838
--- /dev/null
+++ b/kubernetes/oof/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~2.0.0
+    repository: '@local'
diff --git a/kubernetes/oof/resources/config/osdf_config.yaml b/kubernetes/oof/resources/config/osdf_config.yaml
new file mode 100755
index 0000000000..7fe63a50c8
--- /dev/null
+++ b/kubernetes/oof/resources/config/osdf_config.yaml
@@ -0,0 +1,53 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# Credentials for the OOF placement service – SO. Newly added.
+osdfPlacementSOUsername: {{ .Values.config.osdfPlacementSOUsername }}
+osdfPlacementSOPassword: {{ .Values.config.osdfPlacementSOPassword }}
+
+# Credentials for the OOF CM scheduling service – Generic. Newly added
+osdfCMSchedulerUsername: {{ .Values.config.osdfCMSchedulerUsername }}
+osdfCMSchedulerPassword: {{ .Values.config.osdfCMSchedulerPassword }}
+
+# msoUrl: ""   # The SO url for call back. This will be part of the request, so no need
+soUsername: {{ .Values.config.soUsername }}
+soPassword: {{ .Values.config.soPassword }}
+
+conductorUrl: "{{.Release.Name}}-has-api.{{include "common.namespace" .}}:TODO-PORT-FOR-HAS-API"
+conductorUsername: {{ .Values.config.conductorUsername }}
+conductorPassword: {{ .Values.config.conductorPassword }}
+conductorPingWaitTime: {{ .Values.config.conductorPingWaitTime }}
+conductorMaxRetries: {{ .Values.config.conductorMaxRetries }}
+
+# Policy Platform -- requires ClientAuth, Authorization, and Environment
+policyPlatformUrl: {{ .Values.config.policyPlatformUrl }}
+policyPlatformEnv: {{ .Values.config.policyPlatformEnv }}
+policyPlatformUsername: {{ .Values.config.policyPlatformUsername }}
+policyPlatformPassword: {{ .Values.config.policyPlatformPassword }}
+policyClientUsername: {{ .Values.config.policyClientUsername }}
+policyClientPassword: {{ .Values.config.policyClientPassword }}
+
+messageReaderHosts: {{ .Values.config.messageReaderHosts }}
+messageReaderTopic: {{ .Values.config.messageReaderTopic }}
+messageReaderAafUserId: {{ .Values.config.messageReaderAafUserId }}
+messageReaderAafPassword: {{ .Values.config.messageReaderAafPassword }}
+
+sdcUrl: {{ .Values.config.sdcUrl }}
+sdcUsername: {{ .Values.config.sdcUsername }}
+sdcPassword: {{ .Values.config.sdcPassword }}
+sdcONAPInstanceID: {{ .Values.config.sdcONAPInstanceID }}
+
+osdfPlacementUsername: {{ .Values.config.osdfPlacementUsername }}
+osdfPlacementPassword: {{ .Values.config.osdfPlacementPassword }}
diff --git a/kubernetes/oof/templates/NOTES.txt b/kubernetes/oof/templates/NOTES.txt
new file mode 100644
index 0000000000..ee1b36508d
--- /dev/null
+++ b/kubernetes/oof/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/oof/templates/configmap.yaml b/kubernetes/oof/templates/configmap.yaml
new file mode 100644
index 0000000000..4ccc7cc526
--- /dev/null
+++ b/kubernetes/oof/templates/configmap.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/oof/templates/deployment.yaml b/kubernetes/oof/templates/deployment.yaml
new file mode 100644
index 0000000000..30a313c7d3
--- /dev/null
+++ b/kubernetes/oof/templates/deployment.yaml
@@ -0,0 +1,100 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - pdp
+        - --container-name
+        - oof-has-api
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if .Values.liveness.enabled }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /opt/app/config/osdf_config.yaml
+            name: {{ include "common.fullname" . }}-config
+            subPath: osdf_config.yaml
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: osdf_config.yaml
+              path: osdf_config.yaml
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/oof/templates/service.yaml b/kubernetes/oof/templates/service.yaml
new file mode 100644
index 0000000000..66a26868e2
--- /dev/null
+++ b/kubernetes/oof/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/oof/values.yaml b/kubernetes/oof/values.yaml
new file mode 100644
index 0000000000..4196cd23b5
--- /dev/null
+++ b/kubernetes/oof/values.yaml
@@ -0,0 +1,97 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada, VMware
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:1.0.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/optf-osdf:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  msbgateway: msb-iag.{{ include "common.namespace" . }}
+  msbPort: 80
+  # Credentials for the OOF placement service – SO.
+  osdfPlacementSOUsername: so_test
+  osdfPlacementSOPassword: so_testpwd
+  # Credentials for the OOF CM scheduling service – Generic.
+  osdfCMSchedulerUsername: test1
+  osdfCMSchedulerPassword: testpwd1
+  # Credentials of the callback url for SO.
+  soUsername: ""   # SO username for call back.
+  soPassword: ""   # SO password for call back.
+  # Url and credentials for Conductor.
+  conductorUrl: https://oof-has-api.{{ include "common.namespace" . }}:8091/v1/plans/
+  conductorUsername: admin1
+  conductorPassword: plan.15
+  conductorPingWaitTime: 60
+  conductorMaxRetries: 30
+  # Url and credentials for the Policy Platform
+  policyPlatformUrl: http://pdp:8081/pdp/api/getConfig # Policy Dev platform URL
+  policyPlatformEnv: TEST # Environment for policy platform
+  policyPlatformUsername: testpdp # Policy platform username.
+  policyPlatformPassword: alpha123 # Policy platform password.
+  policyClientUsername: python # For use with ClientAuth
+  policyClientPassword: test # For use with ClientAuth
+  # Credentials for the message reader - A placeholder.
+  messageReaderHosts: NA
+  messageReaderTopic: NA
+  messageReaderAafUserId: NA
+  messageReaderAafPassword: NA
+  # Credentials for the SDC interface - A placeholder.
+  sdcUrl: NA
+  sdcUsername: NA
+  sdcPassword: NA
+  sdcONAPInstanceID: NA
+  # Credentials for the placement service – Generic.
+  osdfPlacementUsername: "test"
+  osdfPlacementPassword: "testpwd"
+# default number of instances
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+service:
+  type: NodePort
+  name: oof-osdf
+  externalPort: 8698
+  internalPort: 8699
+  nodePort: 48
+ingress:
+  enabled: false
+resources: {}
diff --git a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py
index f5df9fc32d..e2b627e253 100755
--- a/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py
+++ b/kubernetes/robot/resources/config/eteshare/config/integration_robot_properties.py
@@ -48,6 +48,10 @@ GLOBAL_MSO_PASSWORD = "password1$"
 # music info - everything is from the private oam network (also called onap private network)
 GLOBAL_MUSIC_SERVER_PROTOCOL = "http"
 GLOBAL_MUSIC_SERVER_PORT = "8080"
+# oof
+GLOBAL_OOF_SERVER_PROTOCOL = "http"
+GLOBAL_OOF_HOMING_SERVER_PORT = "8091"
+GLOBAL_OOF_SNIRO_SERVER_PORT = "8698"
 # openstack info - info to select right info in environment
 # packet generate vnf info - everything is from the private oam network (also called onap private network)
 GLOBAL_PACKET_GENERATOR_PORT = "8183"
diff --git a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py
index 585555312c..7c732c0c28 100755
--- a/kubernetes/robot/resources/config/eteshare/config/vm_properties.py
+++ b/kubernetes/robot/resources/config/eteshare/config/vm_properties.py
@@ -26,7 +26,9 @@ GLOBAL_INJECTED_NEXUS_DOCKER_REPO = "nexus3.onap.org:10001"
 GLOBAL_INJECTED_NEXUS_PASSWORD = "docker"
 GLOBAL_INJECTED_NEXUS_REPO = "https://nexus.onap.org/content/sites/raw"
 GLOBAL_INJECTED_NEXUS_USERNAME = "docker"
-GLOBAL_INJECTED_OOF_IP_ADDR = "oof.{{include "common.namespace" .}}"
+GLOBAL_INJECTED_OOF_IP_ADDR = "N/A"
+GLOBAL_INJECTED_OOF_HOMING_IP_ADDR = "oof-has-api.{{include "common.namespace" .}}"
+GLOBAL_INJECTED_OOF_SNIRO_IP_ADDR = "oof-osdf.{{include "common.namespace" .}}"
 GLOBAL_INJECTED_OPENO_IP_ADDR = "msb-iag.{{include "common.namespace" .}}"
 GLOBAL_INJECTED_OPENSTACK_PASSWORD = "{{ .Values.openStackPassword }}"
 GLOBAL_INJECTED_OPENSTACK_TENANT_ID = "{{ .Values.openStackTenantId }}"
@@ -78,7 +80,9 @@ GLOBAL_INJECTED_PROPERTIES = {
     "GLOBAL_INJECTED_NEXUS_PASSWORD" : "docker",
     "GLOBAL_INJECTED_NEXUS_REPO" : "https://nexus.onap.org/content/sites/raw",
     "GLOBAL_INJECTED_NEXUS_USERNAME" : "docker",
-    "GLOBAL_INJECTED_OOF_IP_ADDR" : "oof.{{include "common.namespace" .}}",
+    "GLOBAL_INJECTED_OOF_IP_ADDR" : "N/A",
+    "GLOBAL_INJECTED_OOF_HOMING_IP_ADDR" : "oof-has-api.{{include "common.namespace" .}}",
+    "GLOBAL_INJECTED_OOF_SNIRO_IP_ADDR" : "oof-osdf.{{include "common.namespace" .}}",
     "GLOBAL_INJECTED_OPENO_IP_ADDR" : "msb-iag.{{include "common.namespace" .}}",
     "GLOBAL_INJECTED_OPENSTACK_PASSWORD" : "{{ .Values.openStackEncryptedPassword }}",
     "GLOBAL_INJECTED_OPENSTACK_TENANT_ID" : "{{ .Values.openStackTenantId }}",
diff --git a/kubernetes/robot/resources/config/robot/resources/oof_interface.robot b/kubernetes/robot/resources/config/robot/resources/oof_interface.robot
new file mode 100644
index 0000000000..1c3137e431
--- /dev/null
+++ b/kubernetes/robot/resources/config/robot/resources/oof_interface.robot
@@ -0,0 +1,41 @@
+*** Settings ***
+Documentation     The main interface for interacting with OOF: SNIRO and Homing Service
+Library           RequestsLibrary
+
+Resource          global_properties.robot
+
+*** Variables ***
+${OOF_HOMING_HEALTH_CHECK_PATH}       /v1/plans/healthcheck
+${OOF_SNIRO_HEALTH_CHECK_PATH}        /api/oof/v1/healthcheck
+
+${OOF_HOMING_ENDPOINT}    ${GLOBAL_OOF_SERVER_PROTOCOL}://${GLOBAL_INJECTED_OOF_HOMING_IP_ADDR}:${GLOBAL_OOF_HOMING_SERVER_PORT}
+${OOF_SNIRO_ENDPOINT}     ${GLOBAL_OOF_SERVER_PROTOCOL}://${GLOBAL_INJECTED_OOF_SNIRO_IP_ADDR}:${GLOBAL_OOF_SNIRO_SERVER_PORT}
+
+*** Keywords ***
+Run OOF-Homing Health Check
+     [Documentation]    Runs OOF-Homing Health check
+     ${resp}=    Run OOF-Homing Get Request    ${OOF_HOMING_HEALTH_CHECK_PATH}
+     Should Be Equal As Integers   ${resp.status_code}   200
+
+Run OOF-Homing Get Request
+     [Documentation]    Runs OOF-Homing Get request
+     [Arguments]    ${data_path}
+     ${session}=    Create Session   session   ${OOF_HOMING_ENDPOINT}
+     ${resp}=   Get Request   session   ${data_path}
+     Should Be Equal As Integers   ${resp.status_code}   200
+     Log    Received response from OOF-Homing ${resp.text}
+     [Return]    ${resp}
+ 
+Run OOF-SNIRO Health Check
+     [Documentation]    Runs OOF-SNIRO Health check
+     ${resp}=    Run OOF-SNIRO Get Request    ${OOF_SNIRO_HEALTH_CHECK_PATH}
+     Should Be Equal As Integers   ${resp.status_code}   200
+
+Run OOF-SNIRO Get Request
+     [Documentation]    Runs OOF-SNIRO Get request
+     [Arguments]    ${data_path}
+     ${session}=    Create Session   session   ${OOF_SNIRO_ENDPOINT}
+     ${resp}=   Get Request   session   ${data_path}
+     Should Be Equal As Integers   ${resp.status_code}   200
+     Log    Received response from OOF-SNIRO ${resp.text}
+     [Return]    ${resp}
diff --git a/kubernetes/robot/templates/deployment.yaml b/kubernetes/robot/templates/deployment.yaml
index 6379aa1908..0b658093bf 100644
--- a/kubernetes/robot/templates/deployment.yaml
+++ b/kubernetes/robot/templates/deployment.yaml
@@ -75,6 +75,9 @@ spec:
         - name: robot-resources
           mountPath: /var/opt/OpenECOMP_ETE/robot/resources/sdngc_interface.robot
           subPath: sdngc_interface.robot
+        - name: robot-resources
+          mountPath: /var/opt/OpenECOMP_ETE/robot/resources/oof_interface.robot
+          subPath: oof_interface.robot         
         - name: robot-lighttpd-authorization
           mountPath: /etc/lighttpd/authorization
           subPath: authorization