summaryrefslogtreecommitdiffstats
path: root/kud/tests
AgeCommit message (Collapse)AuthorFilesLines
2022-01-19Use kubectl wait in KuD wait_for_pod test functionTodd Malsbary9-134/+19
This handles intermittent Err* Pod status such as ErrImagePull. Additionally, remove the duplication of wait_for_pod among the tests. Issue-ID: MULTICLOUD-1435 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I70c69e0427b80e31b2f97515ebdbc3496a91ced1
2021-10-25Merge "Update kernel version node selector in nfd test"Ritu Sood1-3/+7
2021-10-25Merge "Remove usage of deprecated route command"Ritu Sood1-2/+2
2021-10-22Update kernel version node selector in nfd testTodd Malsbary1-3/+7
Issue-ID: MULTICLOUD-1413 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I4f15f987ffb739544fd4c62f8f57ab38864bbbb3
2021-10-22Remove usage of deprecated route commandTodd Malsbary1-2/+2
Issue-ID: MULTICLOUD-1412 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I33fd716f64e04bd214002ccbbd53e1c1e2af234a
2021-10-22Disable known hosts checking in kubevirt testTodd Malsbary1-1/+1
Issue-ID: MULTICLOUD-1411 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I45a2df40fa8d1ebb7461454010e8c0713a4e8a90
2021-10-22Merge "Allow KuD installer to specify Kubespray 2.14.1 or 2.16.0"Ritu Sood18-50/+22
2021-10-12Allow KuD installer to specify Kubespray 2.14.1 or 2.16.00.9.2Todd Malsbary18-50/+22
The default is 2.14.1 (the existing value). Setting KUBESPRAY_VERSION=2.16.0 in the installer environment uses the newer Kubespray version. The newer Kubespray version installs Kubernetes 1.20.7. Kubernetes 1.20.7 comes with following caveats: - The Virtlet addon is disabled; it does not work with 1.20.7. This requires removing the plugin_fw test as well. - Kubernetes 1.20.7 removed support for basic auth. Issue-ID: MULTICLOUD-1251 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: Ic8b9fb1f3effc31da58de5bb3768ed9e509d50de
2021-09-15Fix KubeVirt and SR-IOV addon interactionTodd Malsbary1-0/+4
SR-IOV wants to drain the nodes during reconciliation of SriovNetwork resources, while KubeVirt wants to keep at least one instance running at all times via a PodDisruptionBudget. KubeVirt's behavior is not customizable, so split the addons into different composite apps that allow finer control of the instantiation order. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I15c5cec3ef524b0b1d60dc201e04157272cbe376
2021-08-25Merge "Replace virtlet with kubevirt in plugin_fw_v2"Ritu Sood3-17/+24
2021-08-17Replace virtlet with kubevirt in plugin_fw_v2Todd Malsbary3-17/+24
Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: Ifd8ae34b8f04da52acc4c3a6a8259d1bcd05616c
2021-07-28Update EMCO playbook to 21.03.06Todd Malsbary1-1/+0
Issue-ID: MULTICLOUD-1376 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I91422116714e16f520ed37bd00185383b01d41aa
2021-07-16Update KUD to python3Todd Malsbary3-3/+3
Issue-ID: MULTICLOUD-1375 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I0433a55ef2ac9caba976a267fa9e1f41d5353248
2021-06-24Add kubevirt testTodd Malsbary3-20/+174
Some minor refactoring of _functions.sh was done to allow setup and related functions to use the "vmi" resource type in addition to the "deployment" type. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I42b5ef1c48412675a095f2aab68a0efdfdbe0df9
2021-06-24Merge "Move topology-manager configuration to kubespray"Eric Multanen2-8/+120
2021-06-24Merge "Remove warning displayed from ssh commands in baremetal test"Eric Multanen1-1/+1
2021-06-24Merge "Fix jq null error in tests"Eric Multanen4-5/+5
2021-06-21Remove warning displayed from ssh commands in baremetal testTodd Malsbary1-1/+1
Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: If2845857cd72768b0a1c6cf3831e64f3dc412ebf
2021-06-21Move topology-manager configuration to kubesprayTodd Malsbary2-8/+120
The steps performed by the existing ansible playbook can be performed directly by kubespray. In addtion, fix and enable the topology-manager.sh test. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: Iee2197c1fc3e35288796399cccff0d3ae0925a6c
2021-06-17Fix jq null error in testsTodd Malsbary4-5/+5
The specific error is: jq: error (at <stdin>:1232): null (null) cannot be parsed as a number Issue-ID: MULTICLOUD-1361 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I1821e5002260cd65ac467756753e2a2ffa01a4ce
2021-06-16Replace curl in plugin_fw_v2.sh with emcoctlTodd Malsbary2-951/+505
Issue-ID: MULTICLOUD-1360 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: Iac32b8a1551253302134ad34b829ea9aa578ff8e
2021-05-21Merge "Exit cmk test script on error"Ritu Sood1-13/+19
2021-05-20Added initial kata files and containerd support as well as adding the Kata ↵Eric Adams3-0/+99
webhook Issue-ID: MULTICLOUD-1320 Signed-off-by: Eric Adams <eric.adams@intel.com> Change-Id: I9ef0bcde7c2ef22a04c32311d4571abc3b688ffe
2021-05-07EMCO deploy of addonsTodd Malsbary3-2/+7
An example is provided with instructions on how to install the addons with emcoctl. Addtionally, the containerized installer will populate /opt/kud/addons and /opt/kud/multi-cluster/$CLUSTER_NAME/artifacts with the files and instructions necessary as well. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I74de1c9d18a0aaec4a96e38684ec80f00ab0b940
2021-05-07Merge "Replace emco with openness-21.03 release"Ritu Sood1-32/+90
2021-05-05Add qat addon helm chartTodd Malsbary1-1/+1
This chart contains the upstream qat plugin from intel-device-plugins-for-kubernetes together with a qat driver installer. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I3467ba204276999dac4087bdf68ac0d4439861ad
2021-05-05Merge "Add sriov-network addon helm chart"Ritu Sood2-1/+103
2021-05-04Add ovn4nfv addon helm chartTodd Malsbary2-4/+4
This chart follows the upstream installation guide with the following exceptions: - The node-role.kubernetes.io/master:NoSchedule taint is not removed. The YAML files already included the necessary tolerations. - No node labeling is done. Instead, the ovn-control-plane node selector is for the master role, and the nfn-operator pod affinity is for "role: ovn-control-plane". This ensures that the ovn-control-plane and nfn-operator run are scheduled on the same master node, equivalent to the labelling approach used upstream. Also, additional allowed capabilities are needed to run the pods with the restricted PodSecurityPolicy. These capabilities are requested by the Pods, but not available in the default set of allowed capabilities. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I54ae12434572e2e2dd1fe2ec9298d04557331d94
2021-05-04Replace emco with openness-21.03 releaseTodd Malsbary1-32/+90
This change also installs emcoctl in the artifacts directory, similar to what is done for kubectl by kubespray. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I8447210487578ceeef61afc7c3e4d97905303c8a
2021-05-04Add sriov-network addon helm chartTodd Malsbary2-1/+103
This chart deploys the CR used by the sriov-network-operator. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I9364868d3e58fd64e51a77aaa934284fad86a1b1
2021-04-29Exit cmk test script on errorTodd Malsbary1-13/+19
Issue-ID: MULTICLOUD-1335 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I83336983475bab25867c44153657d31b1bacb933
2021-04-28Add X710 to iavf driver NICsTodd Malsbary1-1/+2
Issue-ID: MULTICLOUD-1336 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I7a0ee4302c020e6b7ec785d6a85af636b6a85ecc
2021-03-09Enable plugin_fw.sh to preserve CNF after testsKonrad Bańka1-10/+23
Issue-ID: MULTICLOUD-1306 Signed-off-by: Konrad Bańka <k.banka@samsung.com> Change-Id: Iea0c2e2a36adadc81860f622f04e85a389f53e0c
2020-12-10Merge "Fix sriov test in baremetal deploy"Eric Multanen1-9/+4
2020-12-07Fix QAT addon deploy and testTodd Malsbary1-10/+5
Note that as mentioned in install_qat.sh, the kernel command line must include "intel_iommu=on iommu=pt" for the deploy and test to succeed. The underlying issue is that the playbook was expecting to be run on the same host it executed on and was looking for files in the wrong places. Issue-ID: MULTICLOUD-1261 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I5f59b9147f34f077fcdc63d7fc5f80b56977054c
2020-12-03Fix sriov test in baremetal deployTodd Malsbary1-9/+4
The test incorrectly checked the node running the test for sriov feature support. This fix now checks the cluster for it. Issue-ID: MULTICLOUD-1260 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I869823cc062968c8ac7b9fa037d425244a03799c
2020-11-19Merge "Ignore 404 when deleting non-existent project in emco.sh"Ritu Sood1-1/+1
2020-11-19Merge "Properly escape query string to jq"Ritu Sood1-2/+2
2020-10-30Ignore 404 when deleting non-existent project in emco.shTodd Malsbary1-1/+1
The delete is run at the start of the test, it is expected that the resource does not exist. Issue-ID: MULTICLOUD-1243 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I1b060ec8f17fd4b9b76ed03d8dc3bd7c21756690
2020-10-30Properly escape query string to jqTodd Malsbary1-2/+2
Without this change, the '.request.release-name' query causes jq to get confused by the '-' and fail the test script: jq: error: name/0 is not defined at <top-level>, line 1: .request.release-name jq: 1 compile error Issue-ID: MULTICLOUD-1241 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I386cd46db8e44c92bc24d8eb8a9e3964d9b87d39
2020-10-30Move test inside if block to prevent premature exitTodd Malsbary1-3/+2
grep returns a non-zero error code if the pattern is not found. This would cause the topology-manager.sh test to exit prematurely instead of capturing and logging the error and returning zero as intended. Issue-ID: MULTICLOUD-1240 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I29c4d30630c0f803325c2ed024d4c0b9e8a0e911
2020-10-02Ovnaction and vfw updates for deploy api changeEric Multanen3-120/+122
Update the ovnaction controller APIs to support the api change of including the deployment intent group in the URL. Also fixup: - vfw and other test cases to support the change - updates to emcoctl tool and examples Issue-ID: MULTICLOUD-1218 Signed-off-by: Eric Multanen <eric.w.multanen@intel.com> Change-Id: Icadacb5ec6d7c238bb3bf8a44a39c30692ecebee
2020-10-02Modify GenericPlacement APIs to include DepIntGrpRajamohan Raj1-14/+12
Modify the genericPlacementIntent API such that deploymentIntentGroup becomes a mandatory parameter. Issue-ID: MULTICLOUD-1218 Signed-off-by: Rajamohan Raj <rajamohan.raj@intel.com> Change-Id: I33d2eeac5b60228e9c08921c9347b1b6aa3f8d28
2020-09-30Merge "Fix Status API to actually provide instance status"Eric Multanen1-0/+6
2020-09-30Fix Status API to actually provide instance statusKonrad Bańka1-0/+6
Provide information about instance resources and Pods inside status response. Issue-ID: MULTICLOUD-1177 Signed-off-by: Konrad Bańka <k.banka@samsung.com> Change-Id: Iee6fd56120d091dddfa6b6d0e4aa7eb36d40e888
2020-09-23Add plugin_fw.sh test for v2 and run as part of installer.Todd Malsbary1-0/+1100
To deploy to multiple clusters, set the KUD_PLUGIN_FW_CLUSTERS environment variable to the following format (an array of cluster data objects): [ { "metadata": { "name": "NAME", "description": "DESCRIPTION", "userData1": "USER_DATA_1", "userData2": "USER_DATA_2" }, "file": "KUBECONFIG_PATH" }, { ... } ] Issue-ID: MULTICLOUD-1217 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I4c80fbcef1162b441c4dfba4ce2bfd3ac419bc25
2020-09-23Add playbooks for v2 emco chart.Todd Malsbary1-0/+0
Rename v2/onap4k8s to v2/emco, and rename sanity-check-for-v2.sh to emco.sh. This allows --plugins emco to be passed to installer.sh in place of --plugins onap4k8s. Issue-ID: MULTICLOUD-1181 Signed-off-by: Todd <todd.malsbary@intel.com> Change-Id: Idb427a8aa4c8aaff181965a540078c8cf6dd88aa
2020-09-11Merge "Use external service address and ports in sanity-check-for-v2.sh."Eric Multanen2-36/+77
2020-09-11Use external service address and ports in sanity-check-for-v2.sh.Todd Malsbary2-36/+77
This allows it to be used as an automated test. Issue-ID: MULTICLOUD-1181 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: Ib8636159291243bbb60f974984f296b67f6e397e
2020-09-08Provide capability to specify release-name during instantiationKonrad Bańka1-1/+4
Allow release-name property to be provided during instantiation that, if provided, overrides release-name specified in profile. Additionally updated Makefile to allow easy compilation with different go version easily. Issue-ID: MULTICLOUD-1175 Signed-off-by: Konrad Bańka <k.banka@samsung.com> Change-Id: Id8db484369045cfb0bc99543a80317644fc838f9