summaryrefslogtreecommitdiffstats
path: root/kud/deployment_infra/playbooks/kud-vars.yml
AgeCommit message (Collapse)AuthorFilesLines
2021-05-07Update go_version from 1.12 to 1.14.Todd Malsbary1-1/+1
Go reports a missing crypto/ed25519 module when running the vagrant installer with KUD_PLUGIN_ENABLED. The package was introduced in go 1.13 (https://golang.org/doc/go1.13#crypto/ed25519). Issue-ID: MULTICLOUD-1343 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I2fdd06b67122506308038be0fe6b00a2e737f0f0
2021-05-04Replace emco with openness-21.03 releaseTodd Malsbary1-0/+31
This change also installs emcoctl in the artifacts directory, similar to what is done for kubectl by kubespray. Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I8447210487578ceeef61afc7c3e4d97905303c8a
2021-04-29Remove unused cmk kud varsTodd Malsbary1-4/+0
Issue-ID: MULTICLOUD-1324 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I0c1d43de8506233eb62bde52641bb7fc95b422fc
2020-11-19Merge "Build and deploy sriov module only on supported hosts."Ritu Sood1-1/+2
2020-10-30Upgrade kubespray from 2.12.6 to 2.14.1Todd Malsbary1-2/+3
- Replace move of ansible.cfg from kubespray distribution to /etc/ansible with ANSIBLE_CONFIG environment variable. Ansible modifies ansible.cfg during installation, and the paths in it are relative. - kubespray 2.14.1 requires a kubernetes version > 1.16. Use the default versions of kubernetes and helm provided by kubespray 2.14.1. - kubespray 2.14.1 replaces helm 2 with helm 3. This removes support for helm init and helm serve. It is no longer necessary to call helm init, and the helm serve repository is replaced with file relative URLs. This also triggered a subsequent update of the kubernetes-helm ansible module to include the newer helm versions. - Add "storageType: hostPath" to etcd/values.yaml. Helm deploy of etcd will fail without this due to nil PersistentVolume.metadata.labels.type. - The mitogen module used by kubespray/ansible requires python2 on the hosts. Use the linear strategy to bypass mitogen and install python2 on the cluster hosts. Issue-ID: MULTICLOUD-1230 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I9f50bb4e123fdcacab6b6a97e79cd09fb5c96634
2020-10-05Build and deploy sriov module only on supported hosts.Todd Malsbary1-1/+2
Building on the target host fixes a couple issues: - In the containerized installer, the container image does not include the necessary kernel headers to build the module. - The build and target host must have the same kernel version. There is no guarantee of this. The deploy uses NFD, similar to the QAT playbook. Issue-ID: MULTICLOUD-1228 Signed-off-by: Todd Malsbary <todd.malsbary@intel.com> Change-Id: I58705b73b8ce6d381b4649d5a20b8644e51e1b13
2020-08-10Integrate Topology Managerchenjie11-0/+7
Integrate topology manager by utilizing ansible scripts from openness. Issue-ID: MULTICLOUD-1102 Signed-off-by: ChenjieXu <chenjie.xu@intel.com> Change-Id: Ibaaf77e44c97edffe1ae03bf77c2422c89783e75
2020-06-01Merge "Update the Kubernetes Version to 1.16"Huang Haibin1-2/+2
2020-05-30Add support for pmem-csi plugin and e2e testChen, Tingjie1-0/+6
Issue-ID: MULTICLOUD-1046 Change-Id: I1853e071a99702c5e6f7ba9ca819746576fd0aca Signed-off-by: Chen, Tingjie <tingjie.chen@intel.com>
2020-05-27Update the Kubernetes Version to 1.16Yao Le1-2/+2
Update kubespray to 2.12 to deploy Kubernetes 1.16 Issue-ID: MULTICLOUD-1063 Signed-off-by: Yao Le <le.yao@intel.com> Change-Id: I537f6395e5d05d8b72411dd1e0789e19972f1947
2020-05-25sriov baremetal installation fixKuralamudhan Ramakrishnan1-1/+7
Signed-off-by: Kuralamudhan Ramakrishnan <kuralamudhan.ramakrishnan@intel.com> Issue-ID: MULTICLOUD-1074 Change-Id: I5c497aef954945c4baee10ff5613b220ed9b8152
2020-05-05add cmk in KuDLiang Ding1-0/+16
- deploy cmk related pods - untaint compute nodes if necessary - run cmk unit tests: allocate CPUs from exclusive and shared pools - deploy a testing nginx pod along with cmk testing pods - preset 1/2 CPUs for shared/exlusive pools to fit CI server machines users can adjust the parameters to meet their own requirements Test Results: - many rounds of vagrant/5 VMs(controller01/02/03 and compute01/02) based test are all OK - 14 rounds tests on my local server (S2600WFQ (36C/72T) )and PC(HP Z228 (4C/4T)) with all-in-one bare metal deployment are all OK - CI(a 4C/4T machine) results of latest patch set also show that the test of bare metal deployment is OK - NOTE: both my local test and CI use the same testing method of calling aio.sh after applying the latest patch set. Change-Id: I046a4a63b94f92f23347ab76c21a661521e01119 Issue-ID: MULTICLOUD-879 Signed-off-by: Liang Ding <liang.ding@intel.com>
2020-04-19Install criproxy binary in /usr/local/bin instead of /tmp.Eric Tang1-1/+2
Issue-ID: MULTICLOUD-1051 Signed-off-by: Eric Tang <qcorba@gmail.com> Change-Id: I96443ee539de0e2a18011148f86f97e70634cae3 Signed-off-by: Eric Tang <qcorba@gmail.com>
2020-02-27Adding QAT device plugin to KuDakhilakishore1-6/+6
Basic working skeleton. Adding install script adding vars and updated the playbook. Working on Kernel mode updates and driver installation. Removing SRIOV vars Adding script to change the SSL value for 2 kinds of config files. Updating daemonset image. Adding prereq packages for qat. Minor edits for bashate.Adding testcase and conditions to Ansible tasks for clean, uninstall and install the driver. Updating the plays to use templating. Adding qat-kernel mode test case. Signed-off-by: akhilakishore <akhila.kishore@intel.com> Issue-ID: MULTICLOUD-860 Change-Id: I5ad99e7211c859dc3cb054df644edd3fa77b2596
2019-10-23update helm chart for onap4k8s installation scriptKuralamudhan Ramakrishnan1-1/+1
Issue-ID: MULTICLOUD-867 Co-authored-by: Pramod Raghavendra Jayathirth <pramod.raghavendra.jayathirth@intel.com> Co-authored-by: Ritu Sood <ritu.sood@intel.com> Signed-off-by: Kuralamudhan Ramakrishnan <kuralamudhan.ramakrishnan@intel.com> Change-Id: I72f3b56fd709da21854280abeaadb0c6d03b72fb
2019-10-21Adding SRIOV Network Device Plugin to KuDAkhila Kishore1-0/+6
Integrating SRIOV as an add-on to KuD. A device should have X700 series NIC for this Add-on to work. Getting the device driver, build and installing it is a part of this patch. Followed by running the SRIOV CNI Daemonset, and NetworkAttachmentDefinition. Reworked the way SRIOV check happens. Previously ran on installer.sh. Now the script is injected into kube-nodes and playbook will run only if the hardware check is true by creating a conf file. Removed unwanted comments and nit changes. Signed-off-by: Akhila Kishore <akhila.kishore@intel.com> Issue-ID: MULTICLOUD-832 Change-Id: I1701a50bc717ddca0d332d6a42d329eaf4c03820
2019-09-11Integrating NFD Daemonset with KuDAkhila Kishore1-4/+0
Current NFD code in KuD is unused and obsolete. Integrating NFD as DaemonSet and updating test case for NFD. Added comments. Addressed comments and changed the matchExpression to kernel features. Changed operator from "In" to Gt, and values 4 to 3 better fit broader spectrum of O.S's. Adding exit conditon in case there's an error status. Signed-off-by: Akhila Kishore <akhila.kishore@intel.com> Issue-ID: MULTICLOUD-797 Change-Id: I454fb1998fc84e5f0d566f32b7dcfd85872c5183
2019-09-04Merge "Use Multus Daemonset for installing Multus in KuD"Ritu Sood1-8/+0
2019-09-03Use Multus Daemonset for installing Multus in KuDAkhila Kishore1-8/+0
Currently KuD uses Ansible scripts for installing Multus. Multus has a daemonset that should be used for installing the multus as part of an add-on. This is also helpful for KuD offline deployment in the future. Removed the comment. Updated the images path and removed error supression addressed by comments. Signed-off-by: Akhila Kishore <akhila.kishore@intel.com> Issue-ID: MULTICLOUD-681 Change-Id: Id3702a2b5bd18804c2d7e4d063eba656202cb840
2019-08-30Remove unsused variables from kud-varsRitu Sood1-6/+0
ovn4nfv url and other information not required now after the patch https://gerrit.onap.org/r/#/c/multicloud/k8s/+/93602/ Issue-ID: MULTICLOUD-684 Signed-off-by: Ritu Sood <ritu.sood@intel.com> Change-Id: Ic4ccc67647c85a39d482ff7d71122f05641d1acb
2019-08-19Version update.Akhila Kishore1-1/+1
Updating Kubespray version from 2.8.2 to 2.10.4 for KuD offline support and integration with new add-ons in future. Signed-off-by: Akhila Kishore <akhila.kishore@intel.com> Issue-ID: MULTICLOUD-772 Change-Id: I4b7887aae359cd6197e696010acde6e204c41931
2019-08-19Revert "Version update."Kiran Kamineni1-1/+1
This reverts commit 5f760c3fb7d0e74833b1a2137e6ff3dadc71b2f5. Issue-ID: MULTICLOUD-772 Change-Id: I6feffd87545195992fb28e98dcee4038d9b08474 Signed-off-by: Kiran Kamineni <kiran.k.kamineni@intel.com>
2019-08-19Version update.Akhila Kishore1-1/+1
Updating Kubespray version from 2.8.2 to 2.10.4 for KuD offline support and integration with new add-ons in future. Signed-off-by: Akhila Kishore <akhila.kishore@intel.com> Issue-ID: MULTICLOUD-772 Change-Id: Ib1263e86adb9815e1ee56038507a3c092aad1feb
2019-08-01Correct go version installed by k8s addonsKonrad Bańka1-2/+2
Andrewrothstein.go galaxy role, that was responsible for go installation was in too old tag to support demanded (1.12.4) go version. It also blocked ovn-kubernetes addon installation that's fixed now. Go version has been also upgraded to 1.12.5 Issue-ID: MULTICLOUD-644 Signed-off-by: Konrad Bańka <k.banka@samsung.com> Change-Id: I926bd061a361b2ae2efa2aecedf4fa6321f04cc8
2019-06-04Remove andrewrothstein.kubectl roleRitu Sood1-1/+0
Removing andrewrothstein.kubectl role which was causing issues in aio baremetal scenario Change-Id: If3c8c71319c4b14dedfa5997881307e5424fd453 Signed-off-by: Ritu Sood <ritu.sood@intel.com> Issue-ID: MULTICLOUD-301
2019-05-21Fixing ansible versionMichal Ptacek1-0/+2
It would be safer to fix ansible version to prevent issues coming with newer ansible releases which might not be compatible with current playbooks within this repo. E.g. 2.8.0 is not compatible. Change-Id: Ia1b54c7644bcaf6c453ff6586682ca35ced9acec Issue-ID: MULTICLOUD-634 Signed-off-by: Michal Ptacek <m.ptacek@partner.samsung.com> Signed-off-by: Samuli Silvius <s.silvius@partner.samsung.com>
2019-05-13Merge "Move OVN to the latest version"Victor Morales1-1/+1
2019-05-06update golang version for kudKiran Kamineni1-1/+1
Use the 1.12.4 version of golang for kud instead of the older 1.11 version. Issue-ID: MULTICLOUD-610 Change-Id: I5dab57da539fef78b3097aa73e6628980d534dde Signed-off-by: Kiran Kamineni <kiran.k.kamineni@intel.com>
2019-04-23Move OVN to the latest versionRitu Sood1-1/+1
Chnage commit id for OVN Change-Id: I2b1a6365883ac9f56b4fc7f85d6ea413efe28696 Signed-off-by: Ritu Sood <ritu.sood@intel.com> Issue-ID: MULTICLOUD-578
2019-04-18Updating Multus to v3.3-tpritusood1-6/+6
Multus team created a tech preview for Virtlet issue. Moving KUD to that release. Change-Id: Ib8ed563306594ed87d69140505f45dbd666353dc Signed-off-by: Ritu Sood <ritu.sood@intel.com> Issue-ID: MULTICLOUD-578
2019-03-22Restructuring the repo.Akhila Kishore1-0/+63
The idea is to restructure the existing repo create a deployment independent of Vagrant or other hosting providers. Renamed KRD to KUbernetes Deploy(Kud) including the ansible scripts Added new path to functional tests. Moved samples pdfs to sites. Minor changes to Readme. Updated aio.sh, moved sample config Corrected other nits. Updated and verified test cases. Addressed comments and changes associated with it. Updated Readme and minor change in Vagrantfile. Validated test cases again. Moved aio.sh into vagrant folder. Added new README for each hosting provider and project on the whole. Updated the installer script with relative path. Updated the name to deployment_infra, moved the cFW sripcts to tests. Updated the gitignore file. Issue-ID: MULTICLOUD-301 Change-Id: Ie48c26b12ab58b604493fba58a9c5b9f8ba10942 Signed-off-by: Akhila Kishore <akhila.kishore@intel.com>