diff options
Diffstat (limited to 'kud')
| -rw-r--r-- | kud/tests/README.md | 427 | ||||
| -rwxr-xr-x | kud/tests/_common.sh | 1 | ||||
| -rwxr-xr-x | kud/tests/_common_test.sh | 10 | ||||
| -rwxr-xr-x | kud/tests/_functions.sh | 30 | ||||
| -rwxr-xr-x | kud/tests/multus.sh | 149 | ||||
| -rwxr-xr-x | kud/tests/nfd.sh | 105 | ||||
| -rwxr-xr-x | kud/tests/sriov.sh | 85 |
7 files changed, 755 insertions, 52 deletions
diff --git a/kud/tests/README.md b/kud/tests/README.md new file mode 100644 index 00000000..7256b978 --- /dev/null +++ b/kud/tests/README.md @@ -0,0 +1,427 @@ +# Kud test case +## Summary +This folder contains all the test scripts. Most of those test scripts can be executed simply by `bash <script-name>`. + +## Table of contents +* [Multus CNI](#Multus-CNI) + 1. [define the additional network custom resource definition(CRD)](#Define-custom-resource-definition) + * [bridge CNI](#bridge-CNI) + * [macvlan CNI](#macvlan-CNI) + * [ipvlan CNI](#ipvlan-CNI) + * [ptp CNI](#ptp-CNI) + 2. [Create a pod with the previously CRD annotation](#Create-a-pod-with-the-previously-CRD-annotation) + 3. [Verify the additional interface was configured](#Verify-the-additional-interface-was-configured) +* [SRIOV plugin](#SRIOV-plugin) + 1. [define SRIOV network CRD](#define-SRIOV-network-CRD) + 2. [Create a pod with single/multiple VF interface](#Create-a-pod-with-single/multiple-VF-interface) + * [single VF allocated](#single-VF-allocated) + * [multiple VF allocated](#multiple-VF-allocated) + 3. [Verify the VF interface was allocated](#Verify-the-VF-interface-was-allocated) +* [NFD](#NFD) + 1. [Create a pod to run on particular node](#Create-a-pod-to-run-on-particular-node) + * [nodeSelector](#nodeSelector) + * [node affinity](#node-affinity) + 2. [Verify pod created status](#Verify-pod-created-status) +* [CMK](#) + +## Multus CNI +[Multus CNI](https://github.com/intel/multus-cni) is a container network interface (CNI) plugin for Kubernetes that enables attaching multiple network interfaces to pods. Typically, in Kubernetes each pod only has one network interface (apart from a loopback) -- with Multus you can create a multi-homed pod that has multiple interfaces. This is accomplished by Multus acting as a "meta-plugin", a CNI plugin that can call multiple other CNI plugins. + +### Define custom resource definition +#### bridge CNI + +--- +##### Overview + +With bridge plugin, all containers (on the same host) are plugged into a bridge (virtual switch) that resides in the host network namespace. Please refer to [the bridge cni](https://github.com/containernetworking/plugins/tree/master/plugins/main/bridge) for details. + +##### Example configuration + +``` + cat << NET | kubectl apply -f - +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: bridge-conf +spec: + config: '{ + "cniVersion": "0.3.0", + "name": "mynet", + "type": "bridge", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET +``` +##### Network configuration reference + +* `name` (string, required): the name of the network. +* `type` (string, required): "bridge". +* `bridge` (string, optional): name of the bridge to use/create. Defaults to "cni0". +* `isGateway` (boolean, optional): assign an IP address to the bridge. Defaults to false. +* `isDefaultGateway` (boolean, optional): Sets isGateway to true and makes the assigned IP the default route. Defaults to false. +* `forceAddress` (boolean, optional): Indicates if a new IP address should be set if the previous value has been changed. Defaults to false. +* `ipMasq` (boolean, optional): set up IP Masquerade on the host for traffic originating from this network and destined outside of it. Defaults to false. +* `mtu` (integer, optional): explicitly set MTU to the specified value. Defaults to the value chosen by the kernel. +* `hairpinMode` (boolean, optional): set hairpin mode for interfaces on the bridge. Defaults to false. +* `ipam` (dictionary, required): IPAM configuration to be used for this network. For L2-only network, create empty dictionary. +* `promiscMode` (boolean, optional): set promiscuous mode on the bridge. Defaults to false. +* `vlan` (int, optional): assign VLAN tag. Defaults to none. + +#### macvlan CNI + +--- + +##### Overview + +macvlan functions like a switch that is already connected to the host interface. +A host interface gets "enslaved" with the virtual interfaces sharing the physical device but having distinct MAC addresses. +Please refer to [the macvlan cni](https://github.com/containernetworking/plugins/tree/master/plugins/main/macvlan) for details. + +##### Example configuration + +``` + cat << NET | kubectl apply -f - +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: macvlan-conf +spec: + config: '{ + "name": "mynet", + "type": "macvlan", + "master": "$master_name", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET +``` + +##### Network configuration reference + +* `name` (string, required): the name of the network +* `type` (string, required): "macvlan" +* `master` (string, optional): name of the host interface to enslave. Defaults to default route interface. +* `mode` (string, optional): one of "bridge", "private", "vepa", "passthru". Defaults to "bridge". +* `mtu` (integer, optional): explicitly set MTU to the specified value. Defaults to the value chosen by the kernel. The value must be \[0, master's MTU\]. +* `ipam` (dictionary, required): IPAM configuration to be used for this network. For interface only without ip address, create empty dictionary. + +#### ipvlan CNI + +--- + +##### Overview + +ipvlan is a new addition to the Linux kernel. It virtualizes the host interface. Please refer to [the ipvlan cni](https://github.com/containernetworking/plugins/tree/master/plugins/main/ipvlan) for details. + +##### Example configuration + +``` + cat << NET | kubectl apply -f - +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: ipvlan-conf +spec: + config: '{ + "name": "mynet", + "type": "ipvlan", + "master": "$master_name", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET +``` + +##### Network configuration reference + +* `name` (string, required): the name of the network. +* `type` (string, required): "ipvlan". +* `master` (string, required unless chained): name of the host interface to enslave. +* `mode` (string, optional): one of "l2", "l3", "l3s". Defaults to "l2". +* `mtu` (integer, optional): explicitly set MTU to the specified value. Defaults to the value chosen by the kernel. +* `ipam` (dictionary, required unless chained): IPAM configuration to be used for this network. + +#### ptp CNI + +--- +##### Overview +The ptp plugin creates a point-to-point link between a container and the host by using a veth device. +Please refer to [the ptp cni](https://github.com/containernetworking/plugins/tree/master/plugins/main/ptp) for details. + +##### Example network configuration + +``` + cat << NET | kubectl apply -f - +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: ptp-conf +spec: + config: '{ + "name": "mynet", + "type": "ptp", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET +``` + +##### Network configuration reference + +* `name` (string, required): the name of the network +* `type` (string, required): "ptp" +* `ipMasq` (boolean, optional): set up IP Masquerade on the host for traffic originating from ip of this network and destined outside of this network. Defaults to false. +* `mtu` (integer, optional): explicitly set MTU to the specified value. Defaults to value chosen by the kernel. +* `ipam` (dictionary, required): IPAM configuration to be used for this network. +* `dns` (dictionary, optional): DNS information to return as described in the result. + +#### Create a pod with the previously CRD annotation +``` + cat << DEPLOYMENT | kubectl create -f - +apiVersion: apps/v1 +kind: Deployment +metadata: + name: $multus_deployment_name + labels: + app: multus +spec: + replicas: 1 + selector: + matchLabels: + app: multus + template: + metadata: + labels: + app: multus + annotations: + k8s.v1.cni.cncf.io/networks: bridge-conf + spec: + containers: + - name: $multus_deployment_name + image: "busybox" + command: ["top"] + stdin: true + tty: true +DEPLOYMENT +``` +> You can add more interfaces to a pod by creating more custom resources and then referring to them in pod's annotation. You can also reuse configurations, so for example, to attach a bridge interface and a macvlan interface to a pod, you could create a pod like so: +``` + cat << DEPLOYMENT | kubectl create -f - +apiVersion: apps/v1 +kind: Deployment +metadata: + name: $multus_deployment_name + labels: + app: multus +spec: + replicas: 1 + selector: + matchLabels: + app: multus + template: + metadata: + labels: + app: multus + annotations: + k8s.v1.cni.cncf.io/networks: bridge-conf, macvlan-conf + spec: + containers: + - name: $multus_deployment_name + image: "busybox" + command: ["top"] + stdin: true + tty: true +DEPLOYMENT +``` +> Note that the annotation now reads k8s.v1.cni.cncf.io/networks: bridge-conf, macvlan-conf. Where we have the same configuration used twice, separated by a comma. + If you were to create another custom resource with the name foo you could use that such as: k8s.v1.cni.cncf.io/networks: foo,macvlan-conf, and use any number of attachments. + +#### Verify the additional interface was configured +We can Verify the additional interface by running command as shown below. +``` +kubectl exec -it $deployment_pod -- ip a +``` +The output should looks like the following. +``` +===== multus-deployment-688659b564-79dth details ===== +1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever +3: eth0@if543: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue + link/ether 0a:58:0a:f4:44:1e brd ff:ff:ff:ff:ff:ff + inet 10.244.68.30/24 scope global eth0 + valid_lft forever preferred_lft forever +5: net1@if544: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue + link/ether 46:9d:68:90:f1:eb brd ff:ff:ff:ff:ff:ff + inet 10.20.0.12/16 scope global net1 + valid_lft forever preferred_lft forever +``` +You should note that a new interface named `net1` is attached. +>For further test information please refer to the file [`./multus.sh`](./multus.sh). + +## SRIOV plugin + + +### define SRIOV network CRD + +##### Example CRD configuration + +``` +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: sriov-conf + annotations: + k8s.v1.cni.cncf.io/resourceName: intel.com/intel_sriov_700 +spec: + config: '{ + "type": "sriov", + "cniVersion": "0.3.1", + "ipam": { + "type": "host-local", + "subnet": "10.56.206.0/24", + "routes": [ + { "dst": "0.0.0.0/0" } + ], + "gateway": "10.56.206.1" + } + }' +``` +### Create a pod with single/multiple VF interface + +#### single VF allocated +``` +cat << POD | kubectl create -f - --validate=false +apiVersion: v1 +kind: Pod +metadata: + name: $deployment_pod + annotations: + k8s.v1.cni.cncf.io/networks: sriov-conf +spec: + containers: + - name: test-pod + image: docker.io/centos/tools:latest + command: + - /sbin/init + resources: + requests: + intel.com/intel_sriov_700: '1' + limits: + intel.com/intel_sriov_700: '1' +POD +``` +#### multiple VF allocated +``` +cat << POD | kubectl create -f - --validate=false +apiVersion: v1 +kind: Pod +metadata: + name: $deployment_pod + annotations: + k8s.v1.cni.cncf.io/networks: sriov-conf, sriov-conf +spec: + containers: + - name: test-pod + image: docker.io/centos/tools:latest + command: + - /sbin/init + resources: + requests: + intel.com/intel_sriov_700: '2' + limits: + intel.com/intel_sriov_700: '2' +POD +``` + +### Verify the VF interface was allocated + +We can Verify the additional VF interface by running command as shown below. +``` +kubectl exec -it $deployment_pod -- ip a +``` +The output should looks like the following. +``` +1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 + link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 + inet 127.0.0.1/8 scope host lo + valid_lft forever preferred_lft forever +3: eth0@if429: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default + link/ether 0a:58:0a:f4:40:09 brd ff:ff:ff:ff:ff:ff link-netnsid 0 + inet 10.244.64.9/24 scope global eth0 + valid_lft forever preferred_lft forever +413: net2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 + link/ether 36:57:78:8b:e1:3b brd ff:ff:ff:ff:ff:ff + inet 10.56.206.4/24 brd 10.56.206.255 scope global net2 + valid_lft forever preferred_lft forever +414: net1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 + link/ether de:d0:73:53:08:66 brd ff:ff:ff:ff:ff:ff + inet 10.56.206.3/24 brd 10.56.206.255 scope global net1 + valid_lft forever preferred_lft forever +``` +>For further test information please refer to the file [`./sriov.sh`](./sriov.sh). + +## NFD + +node feature discovery([NFD](https://github.com/kubernetes-sigs/node-feature-discovery)) detects hardware features available on each node in a Kubernetes cluster, and advertises those features using node labels. +### Create a pod to run on particular node +#### nodeSelector +`nodeSelector` is a field of PodSpec. It specifies a map of key-value pairs. For the pod to be eligible to run on a node, the node must have each of the indicated key-value pairs as labels (it can have additional labels as well). The most common usage is one key-value pair. +##### To create pod configuration with `nodeSelector` +``` +cat << POD > $HOME/$pod_name.yaml | kubectl create -f $HOME/$pod_name.yaml +apiVersion: v1 +kind: Pod +metadata: + name: $pod_name +spec: + nodeSelector: + feature.node.kubernetes.io/kernel-version.major: '4' + containers: + - name: with-node-affinity + image: gcr.io/google_containers/pause:2.0 +POD +``` +#### node affinity +`nodeAffinity` is conceptually similar to `nodeSelector` – it allows you to constrain which nodes your pod is eligible to be scheduled on, based on labels on the node. + +##### To create pod configuration with `nodeAffinity` +``` +cat << POD > $HOME/$pod_name.yaml | kubectl create -f $HOME/$pod_name.yaml +apiVersion: v1 +kind: Pod +metadata: + name: $pod_name +spec: + affinity: + nodeAffinity: + requiredDuringSchedulingIgnoredDuringExecution: + nodeSelectorTerms: + - matchExpressions: + - key: "feature.node.kubernetes.io/kernel-version.major" + operator: Gt + values: + - '3' + containers: + - name: with-node-affinity + image: gcr.io/google_containers/pause:2.0 +POD +``` +>For further information on how to configure nodeAffinity `operator` field please refer to the file [`./nfd.sh`](./nfd.sh). + +### Verify pod created status +To Verify the nfd pod by running command as shown below. +``` +kubectl get pods -A | grep $pod_name +``` +If the output shows pod `STATUS` field is `running`, the pod have been scheduled successfully. diff --git a/kud/tests/_common.sh b/kud/tests/_common.sh index 8da7471e..c7cd898b 100755 --- a/kud/tests/_common.sh +++ b/kud/tests/_common.sh @@ -46,6 +46,7 @@ protected_net_cidr='192.168.20.0/24' protected_private_net_cidr='192.168.10.0/24' onap_private_net_cidr='10.10.0.0/16' sink_ipaddr='192.168.20.250' +multus_private_net_cidr='10.20.0.0/16' # populate_CSAR_containers_vFW() - This function creates the content of CSAR file # required for vFirewal using only containers diff --git a/kud/tests/_common_test.sh b/kud/tests/_common_test.sh index 1c6af678..32781e18 100755 --- a/kud/tests/_common_test.sh +++ b/kud/tests/_common_test.sh @@ -22,6 +22,16 @@ function install_deps { fi } +# install_ipcalc() - Install ipcalc for tests +function install_ipcalc { + if ! $(ipcalc --version &>/dev/null); then + function ipcalc_ubuntu_deps { + sudo apt-get install -y ipcalc + } + install_packages "" ipcalc_ubuntu_deps "" + fi +} + # install_ovn_deps() - Install dependencies required for tests that require OVN function install_ovn_deps { if ! $(yq --version &>/dev/null); then diff --git a/kud/tests/_functions.sh b/kud/tests/_functions.sh index 34c22569..7687f3fa 100755 --- a/kud/tests/_functions.sh +++ b/kud/tests/_functions.sh @@ -15,6 +15,7 @@ set -o pipefail FUNCTIONS_DIR="$(readlink -f "$(dirname "${BASH_SOURCE[0]}")")" source /etc/environment +source $FUNCTIONS_DIR/_common_test.sh function print_msg { local msg=$1 @@ -236,4 +237,33 @@ function teardown { destroy_deployment $deployment_name done } + +# check_ip_range() - Verifying IP address in address range +function check_ip_range { + local IP=$1 + local MASK=$2 + + install_ipcalc + + if [[ ! -e /usr/bin/ipcalc ]]; then + echo -e "Command 'ipcalc' not found" + return 0 + fi + + if [[ -z ${IP} ]] || [[ -z ${MASK} ]]; then + return 1 + fi + min=`/usr/bin/ipcalc $MASK|awk '/HostMin:/{print $2}'` + max=`/usr/bin/ipcalc $MASK|awk '/HostMax:/{print $2}'` + MIN=`echo $min|awk -F"." '{printf"%.0f\n",$1*256*256*256+$2*256*256+$3*256+$4}'` + MAX=`echo $max|awk -F"." '{printf"%.0f\n",$1*256*256*256+$2*256*256+$3*256+$4}'` + IPvalue=`echo $IP|awk -F"." '{printf"%.0f\n",$1*256*256*256+$2*256*256+$3*256+$4}'` + if [[ "$IPvalue" -gt "$MIN" ]] && [[ "$IPvalue" -lt "$MAX" ]]; then + echo -e "$IP in ipset $MASK" + return 0 + fi + echo -e "$IP not in ipset $MASK" + return 1 +} + test_folder=${FUNCTIONS_DIR} diff --git a/kud/tests/multus.sh b/kud/tests/multus.sh index 2cff84bd..ad3a3909 100755 --- a/kud/tests/multus.sh +++ b/kud/tests/multus.sh @@ -15,13 +15,148 @@ set -o pipefail source _common.sh source _functions.sh +function generate_CRD_for_bridge_cni { + local csar_id=$1 + _checks_args $csar_id + pushd ${CSAR_DIR}/${csar_id} + + cat << NET > bridge-network.yaml +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: bridge-conf +spec: + config: '{ + "cniVersion": "0.3.0", + "name": "mynet", + "type": "bridge", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET + popd +} + +function generate_CRD_for_macvlan_cni { + local csar_id=$1 + local master_name=`route | grep 'default' | awk '{print $8}' |head -n 1` + _checks_args $csar_id + pushd ${CSAR_DIR}/${csar_id} + + cat << NET > macvlan-network.yaml +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: macvlan-conf +spec: + config: '{ + "cniVersion": "0.3.0", + "name": "mynet", + "type": "macvlan", + "master": "$master_name", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET + popd +} + +function generate_CRD_for_ipvlan_cni { + local csar_id=$1 + local master_name=`route | grep 'default' | awk '{print $8}' |head -n 1` + _checks_args $csar_id + pushd ${CSAR_DIR}/${csar_id} + + cat << NET > ipvlan-network.yaml +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: ipvlan-conf +spec: + config: '{ + "cniVersion": "0.3.0", + "name": "mynet", + "type": "ipvlan", + "master": "$master_name", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET + popd +} + +function generate_CRD_for_ptp_cni { + local csar_id=$1 + _checks_args $csar_id + pushd ${CSAR_DIR}/${csar_id} + + cat << NET > ptp-network.yaml +apiVersion: "k8s.cni.cncf.io/v1" +kind: NetworkAttachmentDefinition +metadata: + name: ptp-conf +spec: + config: '{ + "cniVersion": "0.3.0", + "name": "mynet", + "type": "ptp", + "ipam": { + "type": "host-local", + "subnet": "$multus_private_net_cidr" + } +}' +NET + popd +} + csar_id=49408ca6-b75b-11e8-8076-525400feed26 # Setup -populate_CSAR_multus $csar_id +generate_CRD_for_bridge_cni $csar_id +generate_CRD_for_macvlan_cni $csar_id +generate_CRD_for_ipvlan_cni $csar_id +generate_CRD_for_ptp_cni $csar_id pushd ${CSAR_DIR}/${csar_id} + kubectl apply -f bridge-network.yaml +kubectl apply -f macvlan-network.yaml +kubectl apply -f ipvlan-network.yaml +kubectl apply -f ptp-network.yaml + +for cni in ${CNI_PLUGINS:-bridge macvlan ipvlan ptp}; do + cat << DEPLOYMENT > $multus_deployment_name.yaml +apiVersion: apps/v1 +kind: Deployment +metadata: + name: $multus_deployment_name + labels: + app: multus +spec: + replicas: 1 + selector: + matchLabels: + app: multus + template: + metadata: + labels: + app: multus + annotations: + k8s.v1.cni.cncf.io/networks: ${cni}-conf + spec: + containers: + - name: $multus_deployment_name + image: "busybox" + command: ["top"] + stdin: true + tty: true +DEPLOYMENT setup $multus_deployment_name @@ -30,13 +165,23 @@ deployment_pod=$(kubectl get pods | grep $multus_deployment_name | awk '{print echo "===== $deployment_pod details =====" kubectl exec -it $deployment_pod -- ip a multus_nic=$(kubectl exec -it $deployment_pod -- ip a) +net1_ip=$(kubectl exec -it $deployment_pod -- ifconfig net1 \ + | grep "inet addr" | awk '{ print $2}' |tr -d "addr:") + if [[ $multus_nic != *"net1"* ]]; then echo "The $deployment_pod pod doesn't contain the net1 nic" exit 1 else - echo "Test Completed!" + check_ip_range ${net1_ip} ${multus_private_net_cidr} + if [[ $? -eq 1 ]]; then + echo "unexpected ip range" + exit 0 + fi + echo "$cni Test Completed!" fi # Teardown teardown $multus_deployment_name + +done popd diff --git a/kud/tests/nfd.sh b/kud/tests/nfd.sh index abf9f92b..1fb0f60e 100755 --- a/kud/tests/nfd.sh +++ b/kud/tests/nfd.sh @@ -18,7 +18,10 @@ rm -f $HOME/*.yaml pod_name=nfd-pod install_deps -cat << POD > $HOME/$pod_name.yaml + +function create_pod_yaml_with_affinity { + +cat << POD > $HOME/$pod_name-affinity.yaml apiVersion: v1 kind: Pod metadata: @@ -33,10 +36,52 @@ spec: operator: Gt values: - '3' + - matchExpressions: + - key: "feature.node.kubernetes.io/kernel-version.major" + operator: Lt + values: + - '20' + - matchExpressions: + - key: "feature.node.kubernetes.io/kernel-version.major" + operator: In + values: + - '3' + - '4' + - '5' + - matchExpressions: + - key: "feature.node.kubernetes.io/kernel-version.major" + operator: NotIn + values: + - '1' + - matchExpressions: + - key: "feature.node.kubernetes.io/kernel-version.major" + operator: Exists + - matchExpressions: + - key: "feature.node.kubernetes.io/label_does_not_exist" + operator: DoesNotExist containers: - name: with-node-affinity image: gcr.io/google_containers/pause:2.0 POD +} + +function create_pod_yaml_with_nodeSelector { + +cat << POD > $HOME/$pod_name-nodeSelector.yaml +apiVersion: v1 +kind: Pod +metadata: + name: $pod_name +spec: + nodeSelector: + feature.node.kubernetes.io/kernel-version.major: '4' + containers: + - name: with-node-affinity + image: gcr.io/google_containers/pause:2.0 +POD + +} + if $(kubectl version &>/dev/null); then labels=$(kubectl get nodes -o json | jq .items[].metadata.labels) @@ -44,30 +89,40 @@ if $(kubectl version &>/dev/null); then if [[ $labels != *"kubernetes.io"* ]]; then exit 1 fi - kubectl delete pod $pod_name --ignore-not-found=true --now - while kubectl get pod $pod_name &>/dev/null; do - sleep 5 - done - kubectl create -f $HOME/$pod_name.yaml --validate=false - for pod in $pod_name; do - status_phase="" - while [[ $status_phase != "Running" ]]; do - new_phase=$(kubectl get pods $pod | awk 'NR==2{print $3}') - if [[ $new_phase != $status_phase ]]; then - echo "$(date +%H:%M:%S) - $pod : $new_phase" - status_phase=$new_phase - fi - - if [[ $new_phase == "Running" ]]; then - echo " Test is complete.." - fi - if [[ $new_phase == "Err"* ]]; then - exit 1 - fi + + create_pod_yaml_with_affinity + create_pod_yaml_with_nodeSelector + + for podType in ${POD_TYPE:-nodeSelector affinity}; do + + kubectl delete pod $pod_name --ignore-not-found=true --now + while kubectl get pod $pod_name &>/dev/null; do + sleep 5 done - done - kubectl delete pod $pod_name - while kubectl get pod $pod_name &>/dev/null; do - sleep 5 + + kubectl create -f $HOME/$pod_name-$podType.yaml --validate=false + + for pod in $pod_name; do + status_phase="" + while [[ $status_phase != "Running" ]]; do + new_phase=$(kubectl get pods $pod | awk 'NR==2{print $3}') + if [[ $new_phase != $status_phase ]]; then + echo "$(date +%H:%M:%S) - $pod-$podType : $new_phase" + status_phase=$new_phase + fi + + if [[ $new_phase == "Running" ]]; then + echo " Test is complete.." + fi + if [[ $new_phase == "Err"* ]]; then + exit 1 + fi + done + done + kubectl delete pod $pod_name + while kubectl get pod $pod_name &>/dev/null; do + sleep 5 + done + done fi diff --git a/kud/tests/sriov.sh b/kud/tests/sriov.sh index a721b722..2dea576e 100755 --- a/kud/tests/sriov.sh +++ b/kud/tests/sriov.sh @@ -24,12 +24,10 @@ else fi pod_name=pod-case-01 -rm -f $HOME/$pod_name.yaml -kubectl delete pod $pod_name --ignore-not-found=true --now --wait -allocated_node_resource=$(kubectl describe node | grep "intel.com/intel_sriov_700" | tail -n1 |awk '{print $(NF)}') -echo "The allocated resource of the node is: " $allocated_node_resource -cat << POD > $HOME/$pod_name.yaml +function create_pod_yaml_with_single_VF { + +cat << POD > $HOME/$pod_name-single.yaml apiVersion: v1 kind: Pod metadata: @@ -48,25 +46,62 @@ spec: limits: intel.com/intel_sriov_700: '1' POD -kubectl create -f $HOME/$pod_name.yaml --validate=false - for pod in $pod_name; do - status_phase="" - while [[ $status_phase != "Running" ]]; do - new_phase=$(kubectl get pods $pod | awk 'NR==2{print $3}') - if [[ $new_phase != $status_phase ]]; then - echo "$(date +%H:%M:%S) - $pod : $new_phase" - status_phase=$new_phase - fi - if [[ $new_phase == "Running" ]]; then - echo "Pod is up and running.." - fi - if [[ $new_phase == "Err"* ]]; then - exit 1 - fi +} + +function create_pod_yaml_with_multiple_VF { + +cat << POD > $HOME/$pod_name-multiple.yaml +apiVersion: v1 +kind: Pod +metadata: + name: pod-case-01 + annotations: + k8s.v1.cni.cncf.io/networks: sriov-eno2, sriov-eno2 +spec: + containers: + - name: test-pod + image: docker.io/centos/tools:latest + command: + - /sbin/init + resources: + requests: + intel.com/intel_sriov_700: '2' + limits: + intel.com/intel_sriov_700: '2' +POD +} +create_pod_yaml_with_single_VF +create_pod_yaml_with_multiple_VF + +for podType in ${POD_TYPE:-single multiple}; do + + kubectl delete pod $pod_name --ignore-not-found=true --now --wait + allocated_node_resource=$(kubectl describe node | grep "intel.com/intel_sriov_700" | tail -n1 |awk '{print $(NF)}') + + echo "The allocated resource of the node is: " $allocated_node_resource + + kubectl create -f $HOME/$pod_name-$podType.yaml --validate=false + + for pod in $pod_name; do + status_phase="" + while [[ $status_phase != "Running" ]]; do + new_phase=$(kubectl get pods $pod | awk 'NR==2{print $3}') + if [[ $new_phase != $status_phase ]]; then + echo "$(date +%H:%M:%S) - $pod-$podType : $new_phase" + status_phase=$new_phase + fi + if [[ $new_phase == "Running" ]]; then + echo "Pod is up and running.." + fi + if [[ $new_phase == "Err"* ]]; then + exit 1 + fi + done done - done -allocated_node_resource=$(kubectl describe node | grep "intel.com/intel_sriov_700" | tail -n1 |awk '{print $(NF)}') + allocated_node_resource=$(kubectl describe node | grep "intel.com/intel_sriov_700" | tail -n1 |awk '{print $(NF)}') + + echo " The current resource allocation after the pod creation is: " $allocated_node_resource + kubectl delete pod $pod_name --now + echo "Test complete." -echo " The current resource allocation after the pod creation is: " $allocated_node_resource -kubectl delete pod $pod_name --now -echo "Test complete." +done |