summaryrefslogtreecommitdiffstats
path: root/kud
diff options
context:
space:
mode:
Diffstat (limited to 'kud')
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/.helmignore23
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/Chart.yaml25
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/templates/_helpers.tpl52
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/templates/config.yaml8
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/templates/daemonset.yaml60
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/templates/drivers/daemonset.yaml70
-rw-r--r--kud/deployment_infra/helm/qat-device-plugin/values.yaml49
-rw-r--r--kud/deployment_infra/installers/Dockerfile.qat-driver-installer21
-rw-r--r--kud/deployment_infra/installers/Makefile2
-rw-r--r--kud/deployment_infra/installers/_qat-driver-installer.sh514
-rwxr-xr-xkud/deployment_infra/installers/entrypoint-qat-driver-installer.sh148
-rwxr-xr-xkud/tests/qat.sh2
12 files changed, 972 insertions, 2 deletions
diff --git a/kud/deployment_infra/helm/qat-device-plugin/.helmignore b/kud/deployment_infra/helm/qat-device-plugin/.helmignore
new file mode 100644
index 00000000..0e8a0eb3
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/.helmignore
@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/
diff --git a/kud/deployment_infra/helm/qat-device-plugin/Chart.yaml b/kud/deployment_infra/helm/qat-device-plugin/Chart.yaml
new file mode 100644
index 00000000..1697abb0
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/Chart.yaml
@@ -0,0 +1,25 @@
+# Copyright 2021 Intel Corporation, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v2
+appVersion: 0.19.0-kerneldrv
+description: |
+ A device plugin that provides support for Intel QuickAssist
+ Technology (QAT) devices under Kubernetes.
+home: https://github.com/intel/intel-device-plugins-for-kubernetes
+name: qat-device-plugin
+sources:
+ - https://github.com/intel/intel-device-plugins-for-kubernetes
+type: application
+version: 0.1.0
diff --git a/kud/deployment_infra/helm/qat-device-plugin/templates/_helpers.tpl b/kud/deployment_infra/helm/qat-device-plugin/templates/_helpers.tpl
new file mode 100644
index 00000000..77889d5d
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/templates/_helpers.tpl
@@ -0,0 +1,52 @@
+{{/* vim: set filetype=mustache: */}}
+{{/*
+Expand the name of the chart.
+*/}}
+{{- define "qat-device-plugin.name" -}}
+{{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Create a default fully qualified app name.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+If release name contains chart name it will be used as a full name.
+*/}}
+{{- define "qat-device-plugin.fullname" -}}
+{{- if .Values.fullnameOverride -}}
+{{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- $name := default .Chart.Name .Values.nameOverride -}}
+{{- if contains $name .Release.Name -}}
+{{- .Release.Name | trunc 63 | trimSuffix "-" -}}
+{{- else -}}
+{{- printf "%s-%s" .Release.Name $name | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+{{- end -}}
+{{- end -}}
+
+{{/*
+Create chart name and version as used by the chart label.
+*/}}
+{{- define "qat-device-plugin.chart" -}}
+{{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+Common labels
+*/}}
+{{- define "qat-device-plugin.labels" -}}
+helm.sh/chart: {{ include "qat-device-plugin.chart" . }}
+{{ include "qat-device-plugin.selectorLabels" . }}
+{{- if .Chart.AppVersion }}
+app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
+{{- end }}
+app.kubernetes.io/managed-by: {{ .Release.Service }}
+{{- end -}}
+
+{{/*
+Selector labels
+*/}}
+{{- define "qat-device-plugin.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "qat-device-plugin.name" . }}
+app.kubernetes.io/instance: {{ .Release.Name }}
+{{- end -}}
diff --git a/kud/deployment_infra/helm/qat-device-plugin/templates/config.yaml b/kud/deployment_infra/helm/qat-device-plugin/templates/config.yaml
new file mode 100644
index 00000000..24ffaa4a
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/templates/config.yaml
@@ -0,0 +1,8 @@
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ .Values.config.name }}
+ labels:
+ {{- include "qat-device-plugin.labels" . | nindent 4 }}
+data:
+ VERBOSITY: {{ .Values.config.logLevel | quote }}
diff --git a/kud/deployment_infra/helm/qat-device-plugin/templates/daemonset.yaml b/kud/deployment_infra/helm/qat-device-plugin/templates/daemonset.yaml
new file mode 100644
index 00000000..c94ff330
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/templates/daemonset.yaml
@@ -0,0 +1,60 @@
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+ name: {{ include "qat-device-plugin.fullname" . }}
+ labels:
+ {{- include "qat-device-plugin.labels" . | nindent 4 }}
+spec:
+ selector:
+ matchLabels:
+ {{- include "qat-device-plugin.selectorLabels" . | nindent 6 }}
+ template:
+ metadata:
+ labels:
+ {{- include "qat-device-plugin.selectorLabels" . | nindent 8 }}
+ spec:
+ {{- with .Values.imagePullSecrets }}
+ imagePullSecrets:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{- with .Values.nodeSelector }}
+ nodeSelector:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{- with .Values.tolerations }}
+ tolerations:
+ {{- toYaml . | nindent 6 }}
+ {{- end }}
+ containers:
+ - name: intel-qat-kernel-plugin
+ image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+ imagePullPolicy: {{ .Values.image.pullPolicy }}
+ resources:
+ {{- toYaml .Values.resources | nindent 10 }}
+ securityContext:
+ {{- toYaml .Values.securityContext | nindent 10 }}
+ env:
+ - name: VERBOSITY
+ valueFrom:
+ configMapKeyRef:
+ name: {{ .Values.config.name }}
+ key: VERBOSITY
+ args: ["-mode", "kernel", "-v", "$(VERBOSITY)"]
+ volumeMounts:
+ - name: devfs
+ mountPath: /dev
+ - name: etcdir
+ mountPath: /etc
+ readOnly: true
+ - name: kubeletsockets
+ mountPath: /var/lib/kubelet/device-plugins
+ volumes:
+ - name: etcdir
+ hostPath:
+ path: /etc
+ - name: kubeletsockets
+ hostPath:
+ path: /var/lib/kubelet/device-plugins
+ - name: devfs
+ hostPath:
+ path: /dev
diff --git a/kud/deployment_infra/helm/qat-device-plugin/templates/drivers/daemonset.yaml b/kud/deployment_infra/helm/qat-device-plugin/templates/drivers/daemonset.yaml
new file mode 100644
index 00000000..7ba04047
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/templates/drivers/daemonset.yaml
@@ -0,0 +1,70 @@
+apiVersion: apps/v1
+kind: DaemonSet
+metadata:
+ name: {{ include "qat-device-plugin.fullname" . }}-qat-driver-installer
+ labels:
+ {{- include "qat-device-plugin.labels" . | nindent 4 }}
+ role: qat-driver-installer
+spec:
+ selector:
+ matchLabels:
+ {{- include "qat-device-plugin.selectorLabels" . | nindent 6 }}
+ role: qat-driver-installer
+ template:
+ metadata:
+ labels:
+ {{- include "qat-device-plugin.selectorLabels" . | nindent 8 }}
+ role: qat-driver-installer
+ spec:
+ hostPID: true
+ {{- with .Values.qatDriver.imagePullSecrets }}
+ imagePullSecrets:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ securityContext:
+ {{- toYaml .Values.qatDriver.podSecurityContext | nindent 8 }}
+ initContainers:
+ - image: "{{ .Values.qatDriver.image.repository }}:{{ .Values.qatDriver.image.tag | default .Chart.AppVersion }}"
+ imagePullPolicy: {{ .Values.qatDriver.image.pullPolicy }}
+ name: qat-driver-installer
+ securityContext:
+ {{- toYaml .Values.qatDriver.securityContext | nindent 12 }}
+ resources:
+ {{- toYaml .Values.qatDriver.resources | nindent 12 }}
+ volumeMounts:
+ - name: qat-install-dir
+ mountPath: "/usr/local/qat"
+ - name: root-dir
+ mountPath: "/root"
+ - name: lib-modules-dir
+ mountPath: "/root/lib/modules"
+ - name: run-systemd-dir
+ mountPath: "/root/run/systemd/system"
+ containers:
+ - image: "gcr.io/google-containers/pause:3.2"
+ name: pause
+ volumes:
+ - name: qat-install-dir
+ hostPath:
+ path: "/opt/qat"
+ - name: root-dir
+ hostPath:
+ path: "/"
+ - name: lib-modules-dir
+ hostPath:
+ path: "/lib/modules"
+ - name: run-systemd-dir
+ hostPath:
+ path: "/run/systemd/system"
+ {{- with .Values.qatDriver.nodeSelector }}
+ nodeSelector:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{- with .Values.qatDriver.affinity }}
+ affinity:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
+ {{- with .Values.qatDriver.tolerations }}
+ tolerations:
+ {{- toYaml . | nindent 8 }}
+ {{- end }}
diff --git a/kud/deployment_infra/helm/qat-device-plugin/values.yaml b/kud/deployment_infra/helm/qat-device-plugin/values.yaml
new file mode 100644
index 00000000..459c36b1
--- /dev/null
+++ b/kud/deployment_infra/helm/qat-device-plugin/values.yaml
@@ -0,0 +1,49 @@
+config:
+ name: intel-qat-plugin-config
+
+ # logLevel sets the plugin's log level.
+ logLevel: 4
+
+imagePullSecrets: []
+
+image:
+ repository: integratedcloudnative/intel-qat-plugin
+ # Overrides the image tag whose default is the chart appVersion.
+ tag: ""
+
+nodeSelector:
+ feature.node.kubernetes.io/iommu-enabled: "true"
+ feature.node.kubernetes.io/custom-qat: "true"
+
+securityContext:
+ readOnlyRootFilesystem: true
+ privileged: true
+
+resources: {}
+
+affinity: {}
+
+tolerations: {}
+
+qatDriver:
+ image:
+ repository: integratedcloudnative/qat-driver-installer
+ pullPolicy: IfNotPresent
+ tag: latest
+ imagePullSecrets: []
+
+ podSecurityContext: {}
+ # fsGroup: 2000
+
+ securityContext:
+ privileged: true
+
+ nodeSelector:
+ feature.node.kubernetes.io/iommu-enabled: "true"
+ feature.node.kubernetes.io/custom-qat: "true"
+
+ resources: {}
+
+ affinity: {}
+
+ tolerations: {}
diff --git a/kud/deployment_infra/installers/Dockerfile.qat-driver-installer b/kud/deployment_infra/installers/Dockerfile.qat-driver-installer
new file mode 100644
index 00000000..7d885a59
--- /dev/null
+++ b/kud/deployment_infra/installers/Dockerfile.qat-driver-installer
@@ -0,0 +1,21 @@
+FROM ubuntu:18.04
+
+RUN apt-get update && \
+ apt-get install -y \
+ bc \
+ build-essential \
+ curl \
+ kmod \
+ libelf-dev \
+ libssl-dev \
+ libudev-dev \
+ pciutils \
+ pkg-config \
+ && \
+ rm -rf /var/lib/apt/lists/*
+
+COPY _common.sh /
+COPY _qat-driver-installer.sh /
+COPY entrypoint-qat-driver-installer.sh /entrypoint.sh
+
+CMD /entrypoint.sh
diff --git a/kud/deployment_infra/installers/Makefile b/kud/deployment_infra/installers/Makefile
index 17c651dd..99aadbc0 100644
--- a/kud/deployment_infra/installers/Makefile
+++ b/kud/deployment_infra/installers/Makefile
@@ -1,6 +1,6 @@
REGISTRY?=integratedcloudnative
TAG?=latest
-IMAGES=iavf-driver-installer
+IMAGES=iavf-driver-installer qat-driver-installer
.PHONY: all $(IMAGES)
diff --git a/kud/deployment_infra/installers/_qat-driver-installer.sh b/kud/deployment_infra/installers/_qat-driver-installer.sh
new file mode 100644
index 00000000..5ecc2f5a
--- /dev/null
+++ b/kud/deployment_infra/installers/_qat-driver-installer.sh
@@ -0,0 +1,514 @@
+#!/bin/bash
+#
+# The functions below are captured from the Makefile targets. They
+# cannot be run in a container as-is due to absolute paths, so they
+# are recreated here.
+#
+# Note also that the portions of qat-driver-install that deal with
+# rc.d are removed: they are intended to be handled by the deployed
+# DaemonSet. The rest is contained in _qat_service_start.
+#
+# The checks for loaded modules are moved to _qat_check_started.
+
+BIN_LIST="qat_c3xxx.bin qat_c3xxx_mmp.bin qat_c62x.bin \
+ qat_c62x_mmp.bin qat_mmp.bin qat_d15xx.bin qat_d15xx_mmp.bin \
+ qat_200xx.bin qat_200xx_mmp.bin qat_895xcc.bin qat_895xcc_mmp.bin"
+
+numDh895xDevicesP=$(lspci -n | grep -c "8086:0435") || true
+numDh895xDevicesV=$(lspci -n | grep -c "8086:0443") || true
+numC62xDevicesP=$(lspci -n | grep -c "8086:37c8") || true
+numC62xDevicesV=$(lspci -n | grep -c "8086:37c9") || true
+numD15xxDevicesP=$(lspci -n | grep -c "8086:6f54") || true
+numD15xxDevicesV=$(lspci -n | grep -c "8086:6f55") || true
+numC3xxxDevicesP=$(lspci -n | grep -c "8086:19e2") || true
+numC3xxxDevicesV=$(lspci -n | grep -c "8086:19e3") || true
+num200xxDevicesP=$(lspci -n | grep -c "8086:18ee") || true
+num200xxDevicesV=$(lspci -n | grep -c "8086:18ef") || true
+
+_qat_driver_install() {
+ info "Installing drivers"
+ if [[ -z "${KERNEL_MOD_SIGN_CMD}" ]]; then
+ info "No driver signing required"
+ INSTALL_MOD_PATH=${ROOT_MOUNT_DIR} make KDIR="${KERNEL_SRC_DIR}" -C "${QAT_INSTALL_DIR_CONTAINER}/quickassist/qat" mod_sign_cmd=":" modules_install
+ else
+ info "Driver signing is required"
+ INSTALL_MOD_PATH=${ROOT_MOUNT_DIR} make KDIR="${KERNEL_SRC_DIR}" -C "${QAT_INSTALL_DIR_CONTAINER}/quickassist/qat" mod_sign_cmd="${KERNEL_MOD_SIGN_CMD}" modules_install
+ fi
+}
+
+_adf_ctl_install() {
+ info "Installing adf_ctl"
+ install -D -m 750 "${QAT_INSTALL_DIR_CONTAINER}/quickassist/utilities/adf_ctl/adf_ctl" "${ROOT_MOUNT_DIR}/usr/local/bin/adf_ctl"
+}
+
+_adf_ctl_uninstall() {
+ info "Uninstalling adf_ctl"
+ # rm ${ROOT_MOUNT_DIR}/usr/local/bin/adf_ctl
+ return 0
+}
+
+_rename_ssl_conf_section() {
+ info "Renaming SSL section in conf files"
+ restore_nullglob=$(shopt -p | grep nullglob)
+ shopt -s nullglob
+ for file in ${ROOT_MOUNT_DIR}/etc/dh895xcc_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/dh895xcc_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/c6xx_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/c6xx_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/d15xx_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/d15xx_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/c3xxx_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/c3xxx_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/200xx_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/200xx_dev${dev}.conf"
+ done
+
+ for file in ${ROOT_MOUNT_DIR}/etc/dh895xccvf_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/dh895xccvf_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/c6xxvf_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/c6xxvf_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/d15xxvf_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/d15xxvf_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/c3xxxvf_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/c3xxxvf_dev${dev}.conf"
+ done
+ for file in ${ROOT_MOUNT_DIR}/etc/200xxvf_dev*.conf; do
+ dev=$(echo "$file" | cut -d '_' -f 2 | tr -cd '[:digit:]')
+ sed -i "s/\[SSL\]/\[SSL${dev}\]/g" "${ROOT_MOUNT_DIR}/etc/200xxvf_dev${dev}.conf"
+ done
+ $restore_nullglob
+}
+
+_qat_service_install() {
+ local -r QAT_DH895XCC_NUM_VFS=32
+ local -r QAT_DHC62X_NUM_VFS=16
+ local -r QAT_DHD15XX_NUM_VFS=16
+ local -r QAT_DHC3XXX_NUM_VFS=16
+ local -r QAT_DH200XX_NUM_VFS=16
+ local -r DEVICES="0435 0443 37c8 37c9 6f54 6f55 19e2 19e3 18ee 18ef"
+
+ info "Installing service"
+ pushd "${QAT_INSTALL_DIR_CONTAINER}/build" > /dev/null
+
+ if [[ ! -d ${ROOT_MOUNT_DIR}/lib/firmware/qat_fw_backup ]]; then
+ mkdir -p "${ROOT_MOUNT_DIR}/lib/firmware/qat_fw_backup"
+ fi
+ for bin in ${BIN_LIST}; do
+ if [[ -e ${ROOT_MOUNT_DIR}/lib/firmware/${bin} ]]; then
+ mv "${ROOT_MOUNT_DIR}/lib/firmware/${bin}" "${ROOT_MOUNT_DIR}/lib/firmware/qat_fw_backup/${bin}"
+ fi
+ if [[ -e ${bin} ]]; then
+ install -D -m 750 "${bin}" "${ROOT_MOUNT_DIR}/lib/firmware/${bin}"
+ fi
+ done
+ if [[ ! -d ${ROOT_MOUNT_DIR}/etc/qat_conf_backup ]]; then
+ mkdir "${ROOT_MOUNT_DIR}/etc/qat_conf_backup"
+ fi
+ mv "${ROOT_MOUNT_DIR}/etc/dh895xcc*.conf" "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/" 2>/dev/null || true
+ mv "${ROOT_MOUNT_DIR}/etc/c6xx*.conf" "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/" 2>/dev/null || true
+ mv "${ROOT_MOUNT_DIR}/etc/d15xx*.conf" "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/" 2>/dev/null || true
+ mv "${ROOT_MOUNT_DIR}/etc/c3xxx*.conf" "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/" 2>/dev/null || true
+ mv "${ROOT_MOUNT_DIR}/etc/200xx*.conf" "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/" 2>/dev/null || true
+ if [[ "${QAT_ENABLE_SRIOV}" != "guest" ]]; then
+ for ((dev=0; dev<numDh895xDevicesP; dev++)); do
+ install -D -m 640 dh895xcc_dev0.conf "${ROOT_MOUNT_DIR}/etc/dh895xcc_dev${dev}.conf"
+ done
+ for ((dev=0; dev<numC62xDevicesP; dev++)); do
+ install -D -m 640 c6xx_dev$((dev%3)).conf "${ROOT_MOUNT_DIR}/etc/c6xx_dev${dev}.conf"
+ done
+ for ((dev=0; dev<numD15xxDevicesP; dev++)); do
+ install -D -m 640 d15xx_dev$((dev%3)).conf "${ROOT_MOUNT_DIR}/etc/d15xx_dev${dev}.conf"
+ done
+ for ((dev=0; dev<numC3xxxDevicesP; dev++)); do
+ install -D -m 640 c3xxx_dev0.conf "${ROOT_MOUNT_DIR}/etc/c3xxx_dev${dev}.conf"
+ done
+ for ((dev=0; dev<num200xxDevicesP; dev++)); do
+ install -D -m 640 200xx_dev0.conf "${ROOT_MOUNT_DIR}/etc/200xx_dev${dev}.conf"
+ done
+ fi
+ if [[ "${QAT_ENABLE_SRIOV}" == "host" ]]; then
+ for ((dev=0; dev<numDh895xDevicesP; dev++)); do
+ for ((vf_dev=0; vf_dev<QAT_DH895XCC_NUM_VFS; vf_dev++)); do
+ vf_dev_num=$((dev * QAT_DH895XCC_NUM_VFS + vf_dev))
+ install -D -m 640 dh895xccvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/dh895xccvf_dev${vf_dev_num}.conf"
+ done
+ done
+ for ((dev=0; dev<numC62xDevicesP; dev++)); do
+ for ((vf_dev=0; vf_dev<QAT_DHC62X_NUM_VFS; vf_dev++)); do
+ vf_dev_num=$((dev * QAT_DHC62X_NUM_VFS + vf_dev))
+ install -D -m 640 c6xxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/c6xxvf_dev${vf_dev_num}.conf"
+ done
+ done
+ for ((dev=0; dev<numD15xxDevicesP; dev++)); do
+ for ((vf_dev=0; vf_dev<QAT_DHD15XX_NUM_VFS; vf_dev++)); do
+ vf_dev_num=$((dev * QAT_DHD15XX_NUM_VFS + vf_dev))
+ install -D -m 640 d15xxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/d15xxvf_dev${vf_dev_num}.conf"
+ done
+ done
+ for ((dev=0; dev<numC3xxxDevicesP; dev++)); do
+ for ((vf_dev=0; vf_dev<QAT_DHC3XXX_NUM_VFS; vf_dev++)); do
+ vf_dev_num=$((dev * QAT_DHC3XXX_NUM_VFS + vf_dev))
+ install -D -m 640 c3xxxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/c3xxxvf_dev${vf_dev_num}.conf"
+ done
+ done
+ for ((dev=0; dev<num200xxDevicesP; dev++)); do
+ for ((vf_dev=0; vf_dev<QAT_DH200XX_NUM_VFS; vf_dev++)); do
+ vf_dev_num=$((dev * QAT_DH200XX_NUM_VFS + vf_dev))
+ install -D -m 640 200xxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/200xxvf_dev${vf_dev_num}.conf"
+ done
+ done
+ else
+ for ((dev=0; dev<numDh895xDevicesV; dev++)); do
+ install -D -m 640 dh895xccvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/dh895xccvf_dev${dev}.conf"
+ done
+ for ((dev=0; dev<numC62xDevicesV; dev++)); do
+ install -D -m 640 c6xxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/c6xxvf_dev${dev}.conf"
+ done
+ for ((dev=0; dev<numD15xxDevicesV; dev++)); do
+ install -D -m 640 d15xxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/d15xxvf_dev${dev}.conf"
+ done
+ for ((dev=0; dev<numC3xxxDevicesV; dev++)); do
+ install -D -m 640 c3xxxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/c3xxxvf_dev${dev}.conf"
+ done
+ for ((dev=0; dev<num200xxDevicesV; dev++)); do
+ install -D -m 640 200xxvf_dev0.conf.vm "${ROOT_MOUNT_DIR}/etc/200xxvf_dev${dev}.conf"
+ done
+ fi
+ _rename_ssl_conf_section
+ info "Creating startup and kill scripts"
+ install -D -m 750 qat_service "${ROOT_MOUNT_DIR}/etc/init.d/qat_service"
+ if [[ "${QAT_ENABLE_SRIOV}" == "host" ]]; then
+ install -D -m 750 qat_service_vfs "${ROOT_MOUNT_DIR}/etc/init.d/qat_service_vfs"
+ fi
+ if [[ "${QAT_ENABLE_SRIOV}" == "host" || "${QAT_ENABLE_SRIOV}" == "guest" ]]; then
+ echo "# Comment or remove next line to disable sriov" > "${ROOT_MOUNT_DIR}/etc/default/qat"
+ echo "SRIOV_ENABLE=1" >> "${ROOT_MOUNT_DIR}/etc/default/qat"
+ else
+ echo "# Remove comment on next line to enable sriov" > "${ROOT_MOUNT_DIR}/etc/default/qat"
+ echo "#SRIOV_ENABLE=1" >> "${ROOT_MOUNT_DIR}/etc/default/qat"
+ fi
+ echo "#LEGACY_LOADED=1" >> "${ROOT_MOUNT_DIR}/etc/default/qat"
+ rm -f "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+ if [[ "${QAT_ENABLE_SRIOV}" == "host" ]]; then
+ if [[ ${numDh895xDevicesP} != 0 ]]; then
+ echo "blacklist qat_dh895xccvf" >> "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+ fi
+ if [[ ${numC3xxxDevicesP} != 0 ]]; then
+ echo "blacklist qat_c3xxxvf" >> "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+ fi
+ if [[ ${num200xxDevicesP} != 0 ]]; then
+ echo "blacklist qat_200xxvf" >> "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+ fi
+ if [[ ${numC62xDevicesP} != 0 ]]; then
+ echo "blacklist qat_c62xvf" >> "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+ fi
+ if [[ ${numD15xxDevicesP} != 0 ]]; then
+ echo "blacklist qat_d15xxvf" >> "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+ fi
+ fi
+ echo "#ENABLE_KAPI=1" >> "${ROOT_MOUNT_DIR}/etc/default/qat"
+ info "Copying libqat_s.so to ${ROOT_MOUNT_DIR}/usr/local/lib"
+ install -D -m 755 libqat_s.so "${ROOT_MOUNT_DIR}/usr/local/lib/libqat_s.so"
+ info "Copying libusdm_drv_s.so to ${ROOT_MOUNT_DIR}/usr/local/lib"
+ install -D -m 755 libusdm_drv_s.so "${ROOT_MOUNT_DIR}/usr/local/lib/libusdm_drv_s.so"
+ echo /usr/local/lib > "${ROOT_MOUNT_DIR}/etc/ld.so.conf.d/qat.conf"
+ ldconfig -r "${ROOT_MOUNT_DIR}"
+ info "Copying usdm module to system drivers"
+ if [[ ! -z "${KERNEL_MOD_SIGN_CMD}" ]]; then
+ info "Need to sign driver usdm_drv.ko"
+ ${KERNEL_MOD_SIGN_CMD} usdm_drv.ko
+ info "Need to sign driver qat_api.ko"
+ ${KERNEL_MOD_SIGN_CMD} qat_api.ko
+ fi
+ install usdm_drv.ko "${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/kernel/drivers"
+ install qat_api.ko "${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/kernel/drivers"
+ if [[ ! $(chroot "${ROOT_MOUNT_DIR}" getent group qat) ]]; then
+ info "Creating qat group"
+ groupadd -R "${ROOT_MOUNT_DIR}" qat
+ else
+ info "Group qat already exists"
+ fi
+ info "Creating udev rules"
+ rm -f "${ROOT_MOUNT_DIR}/etc/udev/rules.d/00-qat.rules"
+ {
+ echo 'KERNEL=="qat_adf_ctl" MODE="0660" GROUP="qat"';
+ echo 'KERNEL=="qat_dev_processes" MODE="0660" GROUP="qat"';
+ echo 'KERNEL=="usdm_drv" MODE="0660" GROUP="qat"';
+ echo 'ACTION=="add", DEVPATH=="/module/usdm_drv" SUBSYSTEM=="module" RUN+="/bin/mkdir /dev/hugepages/qat"';
+ echo 'ACTION=="add", DEVPATH=="/module/usdm_drv" SUBSYSTEM=="module" RUN+="/bin/chgrp qat /dev/hugepages/qat"';
+ echo 'ACTION=="add", DEVPATH=="/module/usdm_drv" SUBSYSTEM=="module" RUN+="/bin/chmod 0770 /dev/hugepages/qat"';
+ echo 'ACTION=="remove", DEVPATH=="/module/usdm_drv" SUBSYSTEM=="module" RUN+="/bin/rmdir /dev/hugepages/qat"';
+ for dev in ${DEVICES}; do
+ echo 'KERNEL=="uio*", ATTRS{vendor}=="0x'"$(echo "8086" | tr -d \")"'", ATTRS{device}=="0x'"$(echo "${dev}" | tr -d \")"'" MODE="0660" GROUP="qat"';
+ done
+ } > "${ROOT_MOUNT_DIR}/etc/udev/rules.d/00-qat.rules"
+ info "Creating module.dep file for QAT released kernel object"
+ info "This will take a few moments"
+ depmod -a -b "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/depmod.d"
+
+ popd > /dev/null
+}
+
+_qat_service_start() {
+ if [[ $(lsmod | grep -c "usdm_drv") != "0" ]]; then
+ rmmod usdm_drv
+ fi
+ info "Starting QAT service"
+ info "... shutting down"
+ chroot "${ROOT_MOUNT_DIR}" /etc/init.d/qat_service shutdown || true
+ sleep 3
+ info "... starting"
+ chroot "${ROOT_MOUNT_DIR}" /etc/init.d/qat_service start
+ if [[ "${QAT_ENABLE_SRIOV}" == "host" ]]; then
+ modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" vfio-pci
+ chroot "${ROOT_MOUNT_DIR}" /etc/init.d/qat_service_vfs start
+ fi
+ info "... started"
+}
+
+_qat_check_started() {
+ if [[ $(lsmod | grep -c "usdm_drv") == "0" ]]; then
+ error "usdm_drv module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ if [[ ${numDh895xDevicesP} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_dh895xcc") == "0" ]]; then
+ error "qat_dh895xcc module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${numC62xDevicesP} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_c62x") == "0" ]]; then
+ error "qat_c62x module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${numD15xxDevicesP} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_d15xx") == "0" ]]; then
+ error "qat_d15xx module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${numC3xxxDevicesP} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_c3xxx") == "0" ]]; then
+ error "qat_c3xxx module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${num200xxDevicesP} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_200xx") == "0" ]]; then
+ error "qat_200xx module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ "${QAT_ENABLE_SRIOV}" == "guest" ]]; then
+ if [[ ${numDh895xDevicesV} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_dh895xccvf") == "0" ]]; then
+ error "qat_dh895xccvf module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${numC62xDevicesV} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_c62xvf") == "0" ]]; then
+ error "qat_c62xvf module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${numD15xxDevicesV} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_d15xxvf") == "0" ]]; then
+ error "qat_d15xxvf module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${numC3xxxDevicesV} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_c3xxxvf") == "0" ]]; then
+ error "qat_c3xxxvf module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ if [[ ${num200xxDevicesV} != 0 ]]; then
+ if [[ $(lsmod | grep -c "qat_200xxvf") == "0" ]]; then
+ error "qat_200xxvf module not installed"
+ return "${RETCODE_ERROR}"
+ fi
+ fi
+ fi
+ if [[ $("${ROOT_MOUNT_DIR}/usr/local/bin/adf_ctl" status | grep -c "state: down") != "0" ]]; then
+ error "QAT driver not activated"
+ return "${RETCODE_ERROR}"
+ fi
+}
+
+_qat_service_shutdown() {
+ info "Stopping service"
+ if [[ $(lsmod | grep -c "qat") != "0" || -e ${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/updates/drivers/crypto/qat/qat_common/intel_qat.ko ]]; then
+ if [[ $(lsmod | grep -c "usdm_drv") != "0" ]]; then
+ rmmod usdm_drv
+ fi
+ if [[ -e ${ROOT_MOUNT_DIR}/etc/init.d/qat_service_upstream ]]; then
+ until chroot "${ROOT_MOUNT_DIR}" /etc/init.d/qat_service_upstream shutdown; do
+ sleep 1
+ done
+ elif [[ -e ${ROOT_MOUNT_DIR}/etc/init.d/qat_service ]]; then
+ until chroot "${ROOT_MOUNT_DIR}" /etc/init.d/qat_service shutdown; do
+ sleep 1
+ done
+ fi
+ fi
+}
+
+_qat_service_uninstall() {
+ info "Uninstalling service"
+ if [[ $(lsmod | grep -c "qat") != "0" || -e ${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/updates/drivers/crypto/qat/qat_common/intel_qat.ko ]]; then
+ info "Removing the QAT firmware"
+ for bin in ${BIN_LIST}; do
+ if [[ -e ${ROOT_MOUNT_DIR}/lib/firmware/${bin} ]]; then
+ rm "${ROOT_MOUNT_DIR}/lib/firmware/${bin}"
+ fi
+ if [[ -e ${ROOT_MOUNT_DIR}/lib/firmware/qat_fw_backup/${bin} ]]; then
+ mv "${ROOT_MOUNT_DIR}/lib/firmware/qat_fw_backup/${bin}" "${ROOT_MOUNT_DIR}/lib/firmware/${bin}"
+ fi
+ done
+
+ if [[ -d ${ROOT_MOUNT_DIR}/lib/firmware/qat_fw ]]; then
+ rm "${ROOT_MOUNT_DIR}/lib/firmware/qat_fw_backup"
+ fi
+
+ if [[ -e ${ROOT_MOUNT_DIR}/etc/init.d/qat_service_upstream ]]; then
+ rm "${ROOT_MOUNT_DIR}/etc/init.d/qat_service_upstream"
+ rm "${ROOT_MOUNT_DIR}/usr/local/bin/adf_ctl"
+ elif [[ -e ${ROOT_MOUNT_DIR}/etc/init.d/qat_service ]]; then
+ rm "${ROOT_MOUNT_DIR}/etc/init.d/qat_service"
+ rm "${ROOT_MOUNT_DIR}/usr/local/bin/adf_ctl"
+ fi
+ rm -f "${ROOT_MOUNT_DIR}/etc/init.d/qat_service_vfs"
+ rm -f "${ROOT_MOUNT_DIR}/etc/modprobe.d/blacklist-qat-vfs.conf"
+
+ rm -f "${ROOT_MOUNT_DIR}/usr/local/lib/libqat_s.so"
+ rm -f "${ROOT_MOUNT_DIR}/usr/local/lib/libusdm_drv_s.so"
+ rm -f "${ROOT_MOUNT_DIR}/etc/ld.so.conf.d/qat.conf"
+ ldconfig -r "${ROOT_MOUNT_DIR}"
+
+ info "Removing config files"
+ rm -f "${ROOT_MOUNT_DIR}/etc/dh895xcc*.conf"
+ rm -f "${ROOT_MOUNT_DIR}/etc/c6xx*.conf"
+ rm -f "${ROOT_MOUNT_DIR}/etc/d15xx*.conf"
+ rm -f "${ROOT_MOUNT_DIR}/etc/c3xxx*.conf"
+ rm -f "${ROOT_MOUNT_DIR}/etc/200xx*.conf"
+ rm -f "${ROOT_MOUNT_DIR}/etc/udev/rules.d/00-qat.rules"
+
+ mv -f "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/dh895xcc*.conf" "${ROOT_MOUNT_DIR}/etc/" 2>/dev/null || true
+ mv -f "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/c6xx*.conf" "${ROOT_MOUNT_DIR}/etc/" 2>/dev/null || true
+ mv -f "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/d15xx*.conf" "${ROOT_MOUNT_DIR}/etc/" 2>/dev/null || true
+ mv -f "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/c3xxx*.conf" "${ROOT_MOUNT_DIR}/etc/" 2>/dev/null || true
+ mv -f "${ROOT_MOUNT_DIR}/etc/qat_conf_backup/200xx*.conf" "${ROOT_MOUNT_DIR}/etc/" 2>/dev/null || true
+
+ info "Removing drivers modules"
+ rm -rf "${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/updates/drivers/crypto/qat"
+ rm -f "${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/kernel/drivers/usdm_drv.ko"
+ rm -f "${ROOT_MOUNT_DIR}/lib/modules/$(uname -r)/kernel/drivers/qat_api.ko"
+ info "Creating module.dep file for QAT released kernel object"
+ depmod -a -b "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/depmod.d"
+
+ if [[ $(lsmod | grep -c "usdm_drv|intel_qat") != "0" ]]; then
+ if [[ $(modinfo intel_qat | grep -c "updates") == "0" ]]; then
+ info "In-tree driver loaded"
+ info "Acceleration uninstall complete"
+ else
+ error "Some modules not removed properly"
+ error "Acceleration uninstall failed"
+ fi
+ else
+ info "Acceleration uninstall complete"
+ fi
+ if [[ ${numDh895xDevicesP} != 0 ]]; then
+ lsmod | grep qat_dh895xcc >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_dh895xcc >/dev/null 2>&1 || true
+ fi
+ if [[ ${numC62xDevicesP} != 0 ]]; then
+ lsmod | grep qat_c62x >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_c62x >/dev/null 2>&1 || true
+ fi
+ if [[ ${numD15xxDevicesP} != 0 ]]; then
+ lsmod | grep qat_d15xx >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_d15xx >/dev/null 2>&1 || true
+ fi
+ if [[ ${numC3xxxDevicesP} != 0 ]]; then
+ lsmod | grep qat_c3xxx >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_c3xxx >/dev/null 2>&1 || true
+ fi
+ if [[ ${num200xxDevicesP} != 0 ]]; then
+ lsmod | grep qat_200xx >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_200xx >/dev/null 2>&1 || true
+ fi
+ if [[ ${numDh895xDevicesV} != 0 ]]; then
+ lsmod | grep qat_dh895xccvf >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_dh895xccvf >/dev/null 2>&1 || true
+ fi
+ if [[ ${numC62xDevicesV} != 0 ]]; then
+ lsmod | grep qat_c62xvf >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_c62xvf >/dev/null 2>&1 || true
+ fi
+ if [[ ${numD15xxDevicesV} != 0 ]]; then
+ lsmod | grep qat_d15xxvf >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_d15xxvf >/dev/null 2>&1 || true
+ fi
+ if [[ ${numC3xxxDevicesV} != 0 ]]; then
+ lsmod | grep qat_c3xxxvf >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_c3xxxvf >/dev/null 2>&1 || true
+ fi
+ if [[ ${num200xxDevicesV} != 0 ]]; then
+ lsmod | grep qat_200xxvf >/dev/null 2>&1 || modprobe -d "${ROOT_MOUNT_DIR}" -C "${ROOT_MOUNT_DIR}/etc/modprobe.d" -b -q qat_200xxvf >/dev/null 2>&1 || true
+ fi
+ else
+ info "Acceleration package not installed"
+ fi
+}
+
+_qat_sample_install() {
+ info "Installing samples"
+ if [[ -f ${QAT_INSTALL_DIR_CONTAINER}/quickassist/utilities/libusdm_drv/linux/build/linux_2.6/user_space/libusdm_drv.a ]]; then
+ ICP_ROOT="${QAT_INSTALL_DIR_CONTAINER}" make perf_user -C "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code"
+ cp "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code/performance/build/linux_2.6/user_space/cpa_sample_code" "${QAT_INSTALL_DIR_CONTAINER}/build"
+ ICP_ROOT="${QAT_INSTALL_DIR_CONTAINER}" KERNEL_SOURCE_ROOT="${KERNEL_SRC_DIR}" make perf_kernel -C "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code"
+ cp "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code/performance/build/linux_2.6/kernel_space/cpa_sample_code.ko" "${QAT_INSTALL_DIR_CONTAINER}/build"
+ else
+ error "No libusdm_drv library found - build the project (make all) before samples"
+ return "${RETCODE_ERROR}"
+ fi
+
+ if [[ ! -d ${ROOT_MOUNT_DIR}/lib/firmware ]]; then
+ mkdir "${ROOT_MOUNT_DIR}/lib/firmware"
+ fi
+
+ cp "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code/performance/compression/calgary" "${ROOT_MOUNT_DIR}/lib/firmware"
+ cp "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code/performance/compression/calgary32" "${ROOT_MOUNT_DIR}/lib/firmware"
+ cp "${QAT_INSTALL_DIR_CONTAINER}/quickassist/lookaside/access_layer/src/sample_code/performance/compression/canterbury" "${ROOT_MOUNT_DIR}/lib/firmware"
+ if [[ ! -z "${KERNEL_MOD_SIGN_CMD}" ]]; then
+ if [[ -f ${QAT_INSTALL_DIR_CONTAINER}/build/cpa_sample_code.ko ]]; then
+ echo "Need to sign sample code ${QAT_INSTALL_DIR_CONTAINER}/build/cpa_sample_code.ko."
+ "${KERNEL_MOD_SIGN_CMD}" "${QAT_INSTALL_DIR_CONTAINER}/build/cpa_sample_code.ko"
+ fi
+ fi
+
+ install -D -m 750 "${QAT_INSTALL_DIR_CONTAINER}/build/cpa_sample_code" "${ROOT_MOUNT_DIR}/usr/local/bin/cpa_sample_code"
+ install -D -m 750 "${QAT_INSTALL_DIR_CONTAINER}/build/cpa_sample_code.ko" "${ROOT_MOUNT_DIR}/usr/local/bin/cpa_sample_code.ko"
+ info "cpa_sample_code installed under ${ROOT_MOUNT_DIR}/usr/local/bin directory"
+}
+
+_qat_sample_uninstall() {
+ info "Uninstalling samples"
+ rm -f "${ROOT_MOUNT_DIR}/lib/firmware/calgary"
+ rm -f "${ROOT_MOUNT_DIR}/lib/firmware/calgary32"
+ rm -f "${ROOT_MOUNT_DIR}/lib/firmware/canterbury"
+
+ rm -f "${ROOT_MOUNT_DIR}/usr/local/bin/cpa_sample_code"
+ rm -f "${ROOT_MOUNT_DIR}/usr/local/bin/cpa_sample_code.ko"
+}
diff --git a/kud/deployment_infra/installers/entrypoint-qat-driver-installer.sh b/kud/deployment_infra/installers/entrypoint-qat-driver-installer.sh
new file mode 100755
index 00000000..f9221309
--- /dev/null
+++ b/kud/deployment_infra/installers/entrypoint-qat-driver-installer.sh
@@ -0,0 +1,148 @@
+#!/bin/bash
+
+#set -x
+source _common.sh
+source _qat-driver-installer.sh
+
+# IMPORTANT: If the driver version is changed, review the QAT Makefile
+# against _qat.sh. The steps in _qat.sh are from the Makefile and
+# have been modified to run inside a container.
+QAT_DRIVER_VERSION="${QAT_DRIVER_VERSION:-1.7.l.4.12.0-00011}"
+QAT_DRIVER_DOWNLOAD_URL_DEFAULT="https://01.org/sites/default/files/downloads/qat${QAT_DRIVER_VERSION}.tar.gz"
+QAT_DRIVER_DOWNLOAD_URL="${QAT_DRIVER_DOWNLOAD_URL:-$QAT_DRIVER_DOWNLOAD_URL_DEFAULT}"
+QAT_DRIVER_ARCHIVE="$(basename "${QAT_DRIVER_DOWNLOAD_URL}")"
+QAT_INSTALL_DIR_HOST="${QAT_INSTALL_DIR_HOST:-/opt/qat}"
+QAT_INSTALL_DIR_CONTAINER="${QAT_INSTALL_DIR_CONTAINER:-/usr/local/qat}"
+QAT_ENABLE_SRIOV="${QAT_ENABLE_SRIOV:-host}"
+CACHE_FILE="${QAT_INSTALL_DIR_CONTAINER}/.cache"
+
+check_kernel_boot_parameter() {
+ if [[ $(grep -c intel_iommu=on /proc/cmdline) != "0" ]]; then
+ info "Found intel_iommu=on kernel boot parameter"
+ else
+ error "Missing intel_iommu=on kernel boot parameter"
+ exit "${RETCODE_ERROR}"
+ fi
+}
+
+check_sriov_hardware_capabilities() {
+ if [[ $(lspci -vn -d 8086:0435 | grep -c SR-IOV) != "0" ]]; then
+ info "Found dh895xcc SR-IOV hardware capabilities"
+ elif [[ $(lspci -vn -d 8086:37c8 | grep -c SR-IOV) != "0" ]]; then
+ info "Found c6xx SR-IOV hardware capabilities"
+ elif [[ $(lspci -vn -d 8086:6f54 | grep -c SR-IOV) != "0" ]]; then
+ info "Found d15xx SR-IOV hardware capabilities"
+ elif [[ $(lspci -vn -d 8086:19e2 | grep -c SR-IOV) != "0" ]]; then
+ info "Found c3xxx SR-IOV hardware capabilities"
+ else
+ error "Missing SR-IOV hardware capabilities"
+ exit "${RETCODE_ERROR}"
+ fi
+}
+
+download_qat_src() {
+ info "Downloading QAT source ... "
+ mkdir -p "${QAT_INSTALL_DIR_CONTAINER}"
+ pushd "${QAT_INSTALL_DIR_CONTAINER}" > /dev/null
+ curl -L -sS "${QAT_DRIVER_DOWNLOAD_URL}" -o "${QAT_DRIVER_ARCHIVE}"
+ tar xf "${QAT_DRIVER_ARCHIVE}"
+ popd > /dev/null
+}
+
+build_qat_src() {
+ info "Building QAT source ... "
+ pushd "${QAT_INSTALL_DIR_CONTAINER}" > /dev/null
+ KERNEL_SOURCE_ROOT="${KERNEL_SRC_DIR}" ./configure --enable-icp-sriov="${QAT_ENABLE_SRIOV}"
+ make
+ popd > /dev/null
+}
+
+install_qat() {
+ check_kernel_boot_parameter
+ check_sriov_hardware_capabilities
+ download_qat_src
+ build_qat_src
+ _qat_driver_install
+ _adf_ctl_install
+ _qat_service_install
+}
+
+uninstall_qat() {
+ _adf_ctl_uninstall
+ _qat_service_shutdown
+ _qat_service_uninstall
+}
+
+check_cached_version() {
+ info "Checking cached version"
+ if [[ ! -f "${CACHE_FILE}" ]]; then
+ info "Cache file ${CACHE_FILE} not found"
+ return "${RETCODE_ERROR}"
+ fi
+ # Source the cache file and check if the cached driver matches
+ # currently running kernel and driver versions.
+ . "${CACHE_FILE}"
+ if [[ "$(uname -r)" == "${CACHE_KERNEL_VERSION}" ]]; then
+ if [[ "${QAT_DRIVER_VERSION}" == "${CACHE_QAT_DRIVER_VERSION}" ]]; then
+ info "Found existing driver installation for kernel version $(uname -r) and driver version ${QAT_DRIVER_VERSION}"
+ return "${RETCODE_SUCCESS}"
+ fi
+ fi
+ return "${RETCODE_ERROR}"
+}
+
+update_cached_version() {
+ cat >"${CACHE_FILE}"<<__EOF__
+CACHE_KERNEL_VERSION=$(uname -r)
+CACHE_QAT_DRIVER_VERSION=${QAT_DRIVER_VERSION}
+__EOF__
+
+ info "Updated cached version as:"
+ cat "${CACHE_FILE}"
+}
+
+upgrade_driver() {
+ uninstall_qat
+ install_qat
+}
+
+check_driver_started() {
+ _qat_check_started
+}
+
+start_driver() {
+ _qat_service_start
+ _qat_check_started
+}
+
+uninstall_driver() {
+ uninstall_qat
+ rm -f "${CACHE_FILE}"
+}
+
+main() {
+ load_etc_os_release
+ local -r cmd="${1:-install}"
+ case $cmd in
+ install)
+ if ! check_cached_version; then
+ upgrade_driver
+ update_cached_version
+ fi
+ if ! check_driver_started; then
+ start_driver
+ fi
+ ;;
+ uninstall)
+ uninstall_driver
+ ;;
+ install-sample)
+ _qat_sample_install
+ ;;
+ uninstall-sample)
+ _qat_sample_uninstall
+ ;;
+ esac
+}
+
+main "$@"
diff --git a/kud/tests/qat.sh b/kud/tests/qat.sh
index 8365f700..11fb6ca0 100755
--- a/kud/tests/qat.sh
+++ b/kud/tests/qat.sh
@@ -10,7 +10,7 @@
set -o pipefail
-qat_capable_nodes=$(kubectl get nodes -o json | jq -r '.items[] | select(.status.capacity."qat.intel.com/cy2_dc2">="1") | .metadata.name')
+qat_capable_nodes=$(kubectl get nodes -o json | jq -r '.items[] | select((.status.capacity."qat.intel.com/cy2_dc2"|tonumber)>=1) | .metadata.name')
if [ -z "$qat_capable_nodes" ]; then
echo "This test case cannot run. QAT device unavailable."
QAT_ENABLED=False