Add sriov-network addon helm chart

This chart deploys the CR used by the sriov-network-operator.

Issue-ID: MULTICLOUD-1324
Signed-off-by: Todd Malsbary <todd.malsbary@intel.com>
Change-Id: I9364868d3e58fd64e51a77aaa934284fad86a1b1

1 files changed, 144 insertions, 0 deletions

diff --git a/kud/deployment_infra/helm/sriov-network/values.yaml b/kud/deployment_infra/helm/sriov-network/values.yaml
new file mode 100644
index 00000000..d9a38222
--- /dev/null
+++ b/kud/deployment_infra/helm/sriov-network/values.yaml
@@ -0,0 +1,144 @@
+nameOverride: ""
+
+policies:
+- # policyName is the name of the policy
+  policyName: "policy-xl710"
+
+  # nicSelector selects the NICs to be configured.  At least one of
+  # vendor, deviceId, pfNames, or rootDevices must be deined.
+  nicSelector:
+    # deviceID is the device hex code of SR-IOV device.
+    deviceID: "1583"
+
+    # netFilter is the infrastructure networking selection
+    # filter. Allowed values are
+    # "openstack/NetworkID:xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+    #netFilter: ""
+
+    # pfNames is a list of the SR-IOV PF names.
+    #pfNames: []
+
+    # rootDevices is a list of the PCI addresses of SR-IOV PFs.
+    #rootDevices: []
+
+    # vendor is the vendor hex code of SR-IOV device. Allowed values are
+    # "8086", "15b3".
+    vendor: "8086"
+
+  # nodeSelector selects the nodes to be configured.
+  nodeSelector:
+    feature.node.kubernetes.io/network-sriov.capable: "true"
+    feature.node.kubernetes.io/pci-0200_8086_1583.present: "true"
+
+  # numVfs is the Number of VFs for each PF
+  numVfs: 8
+
+  # resourceName is the SR-IOV Network device plugin endpoint.
+  resourceName: "intel_sriov_nic"
+
+- policyName: "policy-82599es"
+  nicSelector:
+    deviceID: "10fb"
+    vendor: "8086"
+  nodeSelector:
+    feature.node.kubernetes.io/network-sriov.capable: "true"
+    feature.node.kubernetes.io/pci-0200_8086_10fb.present: "true"
+  numVfs: 8
+  resourceName: "intel_sriov_nic"
+
+- policyName: "policy-i350"
+  nicSelector:
+    deviceID: "1521"
+    vendor: "8086"
+  nodeSelector:
+    feature.node.kubernetes.io/network-sriov.capable: "true"
+    feature.node.kubernetes.io/pci-0200_8086_1521.present: "true"
+  numVfs: 2
+  resourceName: "intel_sriov_nic"
+
+networks:
+- # networkName is the name of both the SriovNetwork and the created
+  # NetworkAttachmentDefinition custom resource.
+  networkName: "sriov-intel"
+
+  # networkNamespace of the NetworkAttachmentDefinition custom resource.
+  networkNamespace: "default"
+
+  # ipam configuration to be used for the network.
+  ipam: |
+    {
+      "type": "host-local",
+      "subnet": "10.56.206.0/24",
+      "routes": [{
+        "dst": "0.0.0.0/0"
+      }],
+      "gateway": "10.56.206.1"
+    }
+
+  #
+  # Optional values are listed below.
+  #
+
+  # deviceType is the driver type for configured VFs. Allowed values are
+  # "netdevice" and "vfio-pci".
+  #deviceType: "netdevice"
+
+  # eSwitchMode NIC Device Mode. Allowed values are "legacy" and
+  # "switchdev".
+  #eSwitchMode: "switchdev"
+
+  # isRdma defaults to false.
+  #isRdma: true
+
+  # linkType is the NIC link type. Allowed values are "eth", "ETH",
+  # "ib", and "IB".
+  #linkType: "eth"
+
+  # mtu of VF
+  #mtu: 9000
+
+  # priority of the policy, higher priority policies can override lower
+  # ones.
+  #priority: 99
+
+  # capabilities to be configured for this network. Capabilities
+  # supported: (mac|ips), e.g. '{"mac": true}'
+  #capabilities: |
+  #  {
+  #    "mac": true
+  #  }
+
+  # linkState of VF (enable|disable|auto).
+  #linkState: "enable"
+
+  # maxTxRate, in Mbps, for the VF. Defaults to 0 (no rate limiting).
+  #maxTxRate: 0
+
+  # metaPlugins configuration to be used in order to chain metaplugins
+  # to the SR-IOV interface returned by the operator.
+  #metaPlugins: |
+  #  {
+  #    "type": "tuning",
+  #    "sysctl": {
+  #      "net.core.somaxconn": "500"
+  #    }
+  #  }
+
+  # minTxRate, in Mbps, for the VF. Defaults to 0 (no rate
+  # limiting). min_tx_rate should be <= max_tx_rate.
+  #minTxRate: 0
+
+  # spoofChk for VF, (on|off)
+  #spoofChk: "off"
+
+  # trust mode of VF (on|off)
+  #trust: "off"
+
+  # vlan ID to assign for the VF. Defaults to 0.
+  #vlan: 0
+
+  # vlanQoS ID to assign for the VF. Defaults to 0.
+  #vlanQoS: 0
+
+  # resourceName is the SR-IOV Network device plugin endpoint.
+  resourceName: "intel_sriov_nic"