Move CSIT to integration/csit repo

To facilite branching of CSIT tests, all CSIT test
code and scripts are relocated to the integration/csit
repo.

Change-Id: I1e4c0eff44691f73f8098b3c52764107f6b8b8df
Issue-ID: INT-671
Signed-off-by: Gary Wu <gary.i.wu@huawei.com>

271 files changed, 10301 insertions, 0 deletions

diff --git a/plans/aaf/aafapi/setup.sh b/plans/aaf/aafapi/setup.sh
new file mode 100644
index 00000000..add9ae17
--- /dev/null
+++ b/plans/aaf/aafapi/setup.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# ONAP AAF
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+# Place the scripts in run order:
+source ${SCRIPTS}/common_functions.sh
+
+# Clone AAF Authz repo
+mkdir -p $WORKSPACE/archives/aafcsit
+cd $WORKSPACE/archives/aafcsit
+#unset http_proxy https_proxy
+git clone --depth 1 http://gerrit.onap.org/r/aaf/authz -b master
+git pull
+cd $WORKSPACE/archives/aafcsit/authz/auth/auth-service/src/main/resources/docker-compose
+pwd
+chmod -R 777 $WORKSPACE/archives/aafcsit/authz/auth/auth-service/src/main/resources/docker-compose
+
+
+# start aaf containers with docker compose and configuration from docker-compose.yml
+docker-compose up -d
+export aaf_service=$(get_docker_compose_service aaf_container)
+export cassandra_service=$(get_docker_compose_service cassandra_container)
+
+# Wait for initialization of Docker container for AAF & Cassandra
+for i in {1..12}; do
+
+	if [ $(docker inspect --format '{{ .State.Running }}' $aaf_service) ] && \
+		[ $(docker inspect --format '{{ .State.Running }}' $cassandra_service) ] && \
+		[ $(docker inspect --format '{{ .State.Running }}' $aaf_service) ]
+	then
+		echo "AAF Service Running"
+		break
+	else
+		echo sleep $i
+		sleep $i
+	fi
+done
+
+
+AAF_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $aaf_service)
+CASSANDRA_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $cassandra_service)
+
+bypass_ip_adress $AAF_IP
+bypass_ip_adress $CASSANDRA_IP
+
+echo AAF_IP=${AAF_IP}
+echo CASSANDRA_IP=${CASSANDRA_IP}
+
+
+# Wait for initialization of docker services
+for i in {1..12}; do
+    curl -sS -m 1 ${AAF_IP}:8101 && break
+    echo sleep $i
+    sleep $i
+done
+
+#Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v AAF_IP:${AAF_IP}"
diff --git a/plans/aaf/aafapi/teardown.sh b/plans/aaf/aafapi/teardown.sh
new file mode 100644
index 00000000..41e0b00e
--- /dev/null
+++ b/plans/aaf/aafapi/teardown.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh $aaf_service
+kill-instance.sh $cassandra_service
+
+unset aaf_service
+unset cassandra_service
diff --git a/plans/aaf/aafapi/testplan.txt b/plans/aaf/aafapi/testplan.txt
new file mode 100644
index 00000000..ea18ca6d
--- /dev/null
+++ b/plans/aaf/aafapi/testplan.txt
@@ -0,0 +1,2 @@
+# Place the suites in run order.
+aaf/aafapi
diff --git a/plans/aaf/sms-test-plan/setup.sh b/plans/aaf/sms-test-plan/setup.sh
new file mode 100755
index 00000000..9b57d64c
--- /dev/null
+++ b/plans/aaf/sms-test-plan/setup.sh
@@ -0,0 +1,71 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Not sure why this is needed.
+source ${SCRIPTS}/common_functions.sh
+
+CONFIG_FILE=$(pwd)/config/smsconfig.json
+
+mkdir -p $(pwd)/config
+
+docker login -u docker -p docker nexus3.onap.org:10001
+docker pull nexus3.onap.org:10001/onap/aaf/sms
+docker pull docker.io/vault:0.10.0
+
+#
+# Running vault in dev server mode here for CSIT
+# In HELM it runs in production mode
+#
+docker run -e "VAULT_DEV_ROOT_TOKEN_ID=aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee" \
+           -e SKIP_SETCAP=true \
+           --name vault -d -p 8200:8200 vault:0.10.0
+
+SMSDB_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vault)
+cat << EOF > $CONFIG_FILE
+{
+    "cafile": "auth/selfsignedca.pem",
+    "servercert": "auth/server.cert",
+    "serverkey":  "auth/server.key",
+
+    "smsdbaddress":     "http://$SMSDB_IP:8200",
+    "vaulttoken":       "aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee",
+    "disable_tls": true
+}
+EOF
+
+cat $CONFIG_FILE
+
+docker run --workdir /sms -v $CONFIG_FILE:/sms/smsconfig.json \
+           --name sms -d -p 10443:10443 nexus3.onap.org:10001/onap/aaf/sms
+
+SMS_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' sms)
+
+echo "###### WAITING FOR ALL CONTAINERS TO COME UP"
+sleep 20
+for i in {1..20}; do
+    curl -sS -m 1 http://${SMSDB_IP}:8200/v1/sys/seal-status && break
+    echo sleep $i
+    sleep $i
+done
+
+#
+# add here all ROBOT_VARIABLES settings
+#
+echo "# sms robot variables settings";
+ROBOT_VARIABLES="-v SMS_HOSTNAME:http://${SMS_IP} -v SMS_PORT:10443"
+
+echo ${ROBOT_VARIABLES}
diff --git a/plans/aaf/sms-test-plan/teardown.sh b/plans/aaf/sms-test-plan/teardown.sh
new file mode 100644
index 00000000..2c8b3e89
--- /dev/null
+++ b/plans/aaf/sms-test-plan/teardown.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+docker cp sms:/sms/sms.log .
+cat sms.log
+rm sms.log
+rm -rf config
+docker stop sms vault
+docker rm sms vault
+docker rmi nexus3.onap.org:10001/onap/aaf/sms
+docker rmi docker.io/vault:0.10.0
diff --git a/plans/aaf/sms-test-plan/testplan.txt b/plans/aaf/sms-test-plan/testplan.txt
new file mode 100644
index 00000000..c2b3b7b1
--- /dev/null
+++ b/plans/aaf/sms-test-plan/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+aaf/aaf-sms-suite
\ No newline at end of file
diff --git a/plans/aai/esr-server/setup.sh b/plans/aai/esr-server/setup.sh
new file mode 100644
index 00000000..42d9676d
--- /dev/null
+++ b/plans/aai/esr-server/setup.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Copyright 2017-2018 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+
+
+#login to the onap nexus docker repo
+docker login -u docker -p docker nexus3.onap.org:10001
+
+# Start MSB
+docker run -d -p 8500:8500 --name msb_consul nexus3.onap.org:10001/onap/msb/msb_base
+CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo CONSUL_IP=${CONSUL_IP}
+docker run -d -p 10081:10081 -e CONSUL_IP=$CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$CONSUL_IP -e SDCLIENT_IP=$DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IP=${MSB_IP}
+
+# Start esr-server
+#docker run -d --name esr-server --env msbDiscoveryIp=${DISCOVERY_IP} --env msbDiscoveryPort=10081 nexus3.onap.org:10001/onap/aai/esr-server
+#sudo docker run -e MSB_ADDR=${MSB_IP}:80 nexus3.onap.org:10001/onap/aai/esr-server -p  9518:9518 -d --net=host --name esr-server
+docker run -d --name esr-server -e MSB_ADDR=${MSB_IP}:80 nexus3.onap.org:10001/onap/aai/esr-server
+#source ${SCRIPTS}/aai/esr-server/startup.sh i-esrserver ${MSB_IP} 80
+ESRSERVER_IP=`get-instance-ip.sh esr-server`
+echo ESRSERVER_IP=${ESRSERVER_IP}
+
+# Wait for initialization
+for i in {1..20}; do
+    curl -sS -m 1 ${ESRSERVER_IP}:9518 && curl -sS -m 1 ${MSB_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Wait for initialization
+for i in {1..20}; do
+    HTTP_CODE=`curl -o /dev/null -s -w "%{http_code}" "${MSB_IP}:80/api/aai-esr-server/v1/test"`
+    if [ ${HTTP_CODE} -eq 200 ]; then
+       break;
+    else
+       sleep $i
+    fi
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IP:${MSB_IP} -v ESRSERVER_IP:${ESRSERVER_IP}"
+
+
+
diff --git a/plans/aai/esr-server/teardown.sh b/plans/aai/esr-server/teardown.sh
new file mode 100644
index 00000000..93f41383
--- /dev/null
+++ b/plans/aai/esr-server/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This script is sourced by run-csit.sh after Robot test completion.
+
+kill-instance.sh esr-server
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
diff --git a/plans/aai/esr-server/testplan.txt b/plans/aai/esr-server/testplan.txt
new file mode 100644
index 00000000..43ed23e9
--- /dev/null
+++ b/plans/aai/esr-server/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+aai/esr-server/startup
+
diff --git a/plans/aai/resources/aai-resources/appconfig/aai_keystore b/plans/aai/resources/aai-resources/appconfig/aai_keystore
new file mode 100644
index 00000000..1ddef0c9
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/aai_keystore
diff --git a/plans/aai/resources/aai-resources/appconfig/aaiconfig.properties b/plans/aai/resources/aai-resources/appconfig/aaiconfig.properties
new file mode 100644
index 00000000..435507a8
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/aaiconfig.properties
@@ -0,0 +1,119 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+aai.config.checktime=1000
+
+# this could come from siteconfig.pl?
+aai.config.nodename=AutomaticallyOverwritten
+
+
+
+aai.auth.cspcookies_on=false
+aai.dbmodel.filename=ex5.json
+
+aai.server.url.base=https://aai.api.simpledemo.onap.org:8443/aai/
+aai.server.url=https://aai.api.simpledemo.onap.org:8443/aai/v11/
+aai.global.callback.url=https://aai.api.simpledemo.onap.org:8443/aai/
+
+aai.tools.enableBasicAuth=true
+aai.tools.username=AAI
+aai.tools.password=AAI
+
+aai.truststore.filename=aai_keystore
+aai.truststore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+aai.keystore.filename=aai_keystore
+aai.keystore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+
+
+aai.notification.current.version=v11
+aai.notificationEvent.default.status=UNPROCESSED
+aai.notificationEvent.default.eventType=AAI-EVENT
+aai.notificationEvent.default.domain=dev
+aai.notificationEvent.default.sourceName=aai
+aai.notificationEvent.default.sequenceNumber=0
+aai.notificationEvent.default.severity=NORMAL
+aai.notificationEvent.default.version=v11
+# This one lets us enable/disable resource-version checking on updates/deletes
+aai.resourceversion.enableflag=true
+aai.logging.maxStackTraceEntries=10
+aai.default.api.version=v11
+
+
+
+# Used by Model-processing code
+aai.model.delete.sleep.per.vtx.msec=500
+aai.model.query.resultset.maxcount=50
+aai.model.query.timeout.sec=90
+
+# Used by Data Grooming
+aai.grooming.default.max.file=150
+aai.grooming.default.sleep.minutes=7
+
+aai.model.proc.max.levels=50
+aai.edgeTag.proc.max.levels=50
+
+# for transaction log
+aai.logging.hbase.interceptor=true
+aai.logging.hbase.enabled=true
+aai.logging.hbase.logrequest=true
+aai.logging.hbase.logresponse=true
+
+# for gremlin server
+aai.server.rebind=g
+hbase.table.name=aailogging.dev
+hbase.table.timestamp.format=YYYYMMdd-HH:mm:ss:SSS
+hbase.zookeeper.quorum=localhost
+hbase.zookeeper.property.clientPort=2181
+hbase.zookeeper.znode.parent=/hbase
+
+aai.logging.trace.enabled=true
+aai.logging.trace.logrequest=false
+aai.logging.trace.logresponse=false
+
+aai.transaction.logging=true
+aai.transaction.logging.get=false
+aai.transaction.logging.post=false
+
+#timeout for crud enabled flag
+aai.crud.timeoutenabled=true
+
+#timeout app specific -1 to bypass for that app id, a whole number to override the timeout with that value (in ms)
+aai.crud.timeout.appspecific=JUNITTESTAPP1,1|JUNITTESTAPP2,-1|DCAE-CCS,-1|DCAES,-1|AAIRctFeed,-1|NewvceCreator,-1|IANewvceCreator,-1|AAI-CSIOVALS,-1
+
+#default timeout limit added for crud if not overridden (in ms)
+aai.crud.timeoutlimit=100000
+#limit set for bulk consumer APIS
+aai.bulkconsumer.payloadlimit=30
+
+#uncomment and use header X-OverrideLimit with the value to override the bulk api limit
+#aai.bulkconsumer.payloadoverride=E6F04B93462CB5B0EDF41C05A9DDF5C3FE59748F
+aai.bulkconsumer.payloadoverride=false
diff --git a/plans/aai/resources/aai-resources/appconfig/application.properties b/plans/aai/resources/aai-resources/appconfig/application.properties
new file mode 100644
index 00000000..b9c51eaf
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/application.properties
@@ -0,0 +1,72 @@
+# The following info parameters are being referenced by ajsc6
+info.build.artifact=aai-resources
+info.build.name=resources
+info.build.description=Resources Microservice
+info.build.version=1.2.0
+
+spring.application.name=aai-resources
+spring.jersey.type=filter
+
+server.contextPath=/
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+spring.profiles.active=production,dmaap
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+
+#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
+#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
+#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+kubernetes.namespace=org-onap-aai
+
+# If you get an application startup failure that the port is already taken
+# If thats not it, please check if the key-store file path makes sense
+server.local.startpath=aai-resources/src/main/resources/
+server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
+
+server.port=8447
+server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
+server.ssl.key-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.key-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.trust-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.trust-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.client-auth=want
+server.ssl.key-store-type=JKS
+
+# JMS bind address host port
+jms.bind.address=tcp://localhost:61647
+dmaap.ribbon.eureka.enabled=false
+dmaap.ribbon.listOfServers=mr.api.simpledemo.onap.org:3904
+# Number of milliseconds to wait before making ping requests again
+dmaap.ribbon.ServerListRefreshInterval=75000
+dmaap.ribbon.NFLoadBalancerPingInterval=75000
+dmaap.ribbon.NFLoadBalancerRuleClassName=com.netflix.loadbalancer.AvailabilityFilteringRule
+dmaap.ribbon.NFLoadBalancerPingClassName=org.onap.aai.config.HttpPingImpl
+dmaap.ribbon.EnableMarkingServerDownOnReachingFailureLimit=true
+dmaap.ribbon.ServerDownFailureLimit=1
+# This needs to be verified but it seems that adding this property should automatically
+# Make the dmaap client change the url from http to https depending on the server
+dmaap.ribbon.securePorts=3905
+
+# Custom Dmaap Specific Configuration
+dmaap.ribbon.username=
+dmaap.ribbon.password=
+dmaap.ribbon.health.endpoint=/topics/AAI-EVENT
+# Number of seconds to wait for the ping to work and might need to increase this if the pings are all failing
+dmaap.ribbon.pingport.timeout=3
+
+niws.loadbalancer.dmaap.filterCircuitTripped=true
+niws.loadbalancer.dmaap.connectionFailureCountThreshold=3
+niws.loadbalancer.dmaap.circuitTripMaxTimeoutSeconds=180
+#dmaap.ribbon.retryableStatusCodes=404,503
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetriesNextServer=2
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetries=2
+#dmaap.ribbon.retryableStatusCodes.OkToRetryOnAllOperations=true
diff --git a/plans/aai/resources/aai-resources/appconfig/janusgraph-cached.properties b/plans/aai/resources/aai-resources/appconfig/janusgraph-cached.properties
new file mode 100644
index 00000000..c2110f77
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/janusgraph-cached.properties
@@ -0,0 +1,43 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+#caching on
+cache.db-cache = true
+cache.db-cache-clean-wait = 20
+cache.db-cache-time = 180000
+cache.db-cache-size = 0.3
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/resources/aai-resources/appconfig/janusgraph-realtime.properties b/plans/aai/resources/aai-resources/appconfig/janusgraph-realtime.properties
new file mode 100644
index 00000000..4791431a
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/janusgraph-realtime.properties
@@ -0,0 +1,40 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+# Setting db-cache to false ensure the fastest propagation of changes across servers
+cache.db-cache = false
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/resources/aai-resources/appconfig/localhost-access-logback.xml b/plans/aai/resources/aai-resources/appconfig/localhost-access-logback.xml
new file mode 100644
index 00000000..a318796c
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/localhost-access-logback.xml
@@ -0,0 +1,62 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration>
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<appender name="ACCESS"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.CustomLogPatternLayoutEncoder">
+			<Pattern>%a %u %z [%t] "%m %U%q" %s %b %y %i{X-TransactionId} %i{X-FromAppId} %i{X-Forwarded-For} %i{X-AAI-SSL-Client-CN} %i{X-AAI-SSL-Client-OU} %i{X-AAI-SSL-Client-O} %i{X-AAI-SSL-Client-L} %i{X-AAI-SSL-Client-ST} %i{X-AAI-SSL-Client-C} %i{X-AAI-SSL-Client-NotBefore} %i{X-AAI-SSL-Client-NotAfter} %i{X-AAI-SSL-Client-DN} %D</Pattern>
+		</encoder>
+	</appender>
+	<appender-ref ref="ACCESS" />
+</configuration>
+
+<!-- 
+%a - Remote IP address
+%A - Local IP address
+%b - Bytes sent, excluding HTTP headers, or '-' if no bytes were sent
+%B - Bytes sent, excluding HTTP headers
+%h - Remote host name
+%H - Request protocol
+%l - Remote logical username from identd (always returns '-')
+%m - Request method
+%p - Local port
+%q - Query string (prepended with a '?' if it exists, otherwise an empty string
+%r - First line of the request
+%s - HTTP status code of the response
+%S - User session ID
+%t - Date and time, in Common Log Format format
+%u - Remote user that was authenticated
+%U - Requested URL path
+%v - Local server name
+%I - current request thread name (can compare later with stacktraces)
+
+%z - Custom pattern that parses the cert for the subject
+%y - Custom pattern determines rest or dme2
+ -->
\ No newline at end of file
diff --git a/plans/aai/resources/aai-resources/appconfig/logback.xml b/plans/aai/resources/aai-resources/appconfig/logback.xml
new file mode 100644
index 00000000..ee7ee61a
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/logback.xml
@@ -0,0 +1,391 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration scan="true" scanPeriod="60 seconds" debug="false">
+	<statusListener class="ch.qos.logback.core.status.NopStatusListener" />
+
+	<property resource="application.properties" />
+
+	<property name="namespace" value="aai-resources"/>
+
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<jmxConfigurator />
+	<property name="logDirectory" value="${AJSC_HOME}/logs" />
+	<property name="eelfLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfAuditLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfMetricLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{targetVirtualEntity}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<!--  <property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/> -->
+	<property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%ecompResponseCode|%ecompResponseDescription|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+    <property name="eelfTransLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{partnerName}:%m%n"/>
+
+    <conversionRule conversionWord="clr" converterClass="org.springframework.boot.logging.logback.ColorConverter" />
+    <conversionRule conversionWord="wex" converterClass="org.springframework.boot.logging.logback.WhitespaceThrowableProxyConverter" />
+    <conversionRule conversionWord="wEx" converterClass="org.springframework.boot.logging.logback.ExtendedWhitespaceThrowableProxyConverter" />
+	<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+		<encoder>
+			<pattern>
+				%clr(%d{yyyy-MM-dd HH:mm:ss.SSS}){faint} %clr(${LOG_LEVEL_PATTERN:-%5p}) %clr(${PID:- }){magenta} %clr(---){faint} %clr([%15.15t]){faint} %clr(%-40.40logger{39}){cyan} %clr(:){faint} %m%n${LOG_EXCEPTION_CONVERSION_WORD:-%wEx}
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="SANE" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/sane.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/sane.log.%d{yyyy-MM-dd}</fileNamePattern>
+		</rollingPolicy>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncSANE" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="SANE" />
+	</appender>
+
+	<appender name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/metrics.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="asyncMETRIC" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<appender name="DEBUG"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/debug.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncDEBUG" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="DEBUG" />
+	</appender>
+
+	<appender name="ERROR"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/rest/error.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfErrorLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncERROR" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="ERROR" />
+	</appender>
+
+	<appender name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/audit.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/audit.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfAuditLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncAUDIT" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender name="translog"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/translog.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/translog.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfTransLogPattern}</pattern>
+		</encoder>
+	</appender>
+	
+	<appender name="asynctranslog" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="translog" />
+	</appender>
+
+	<appender name="dmaapAAIEventConsumer"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/error.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="dmaapAAIEventConsumerDebug"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/debug.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="dmaapAAIEventConsumerMetric"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/metrics.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="external"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/external/external.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/external/external.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<logger name="org.onap.aai" level="DEBUG" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+		<appender-ref ref="asyncSANE" />
+	</logger>
+
+	<!-- Spring related loggers -->
+	<logger name="org.springframework" level="WARN" />
+	<logger name="org.springframework.beans" level="WARN" />
+	<logger name="org.springframework.web" level="WARN" />
+	<logger name="com.blog.spring.jms" level="WARN" />
+	<logger name="com.jayway.jsonpath" level="WARN" />
+
+	<!-- AJSC Services (bootstrap services) -->
+	<logger name="ajsc" level="WARN" />
+	<logger name="ajsc.RouteMgmtService" level="WARN" />
+	<logger name="ajsc.ComputeService" level="WARN" />
+	<logger name="ajsc.VandelayService" level="WARN" />
+	<logger name="ajsc.FilePersistenceService" level="WARN" />
+	<logger name="ajsc.UserDefinedJarService" level="WARN" />
+	<logger name="ajsc.UserDefinedBeansDefService" level="WARN" />
+	<logger name="ajsc.LoggingConfigurationService" level="WARN" />
+
+	<!-- AJSC related loggers (DME2 Registration, csi logging, restlet, servlet 
+		logging) -->
+	<logger name="org.codehaus.groovy" level="WARN" />
+	<logger name="com.att.scamper" level="WARN" />
+	<logger name="ajsc.utils" level="WARN" />
+	<logger name="ajsc.utils.DME2Helper" level="WARN" />
+	<logger name="ajsc.filters" level="WARN" />
+	<logger name="ajsc.beans.interceptors" level="WARN" />
+	<logger name="ajsc.restlet" level="WARN" />
+	<logger name="ajsc.servlet" level="WARN" />
+	<logger name="com.att.ajsc" level="WARN" />
+	<logger name="com.att.ajsc.csi.logging" level="WARN" />
+	<logger name="com.att.ajsc.filemonitor" level="WARN" />
+	<logger name="com.netflix.loadbalancer" level="WARN" />
+
+	<logger name="org.apache.zookeeper" level="OFF" />
+
+	<!-- Other Loggers that may help troubleshoot -->
+	<logger name="net.sf" level="WARN" />
+	<logger name="org.apache.commons.httpclient" level="WARN" />
+	<logger name="org.apache.commons" level="WARN" />
+	<logger name="org.apache.coyote" level="WARN" />
+	<logger name="org.apache.jasper" level="WARN" />
+
+	<!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging. 
+		May aid in troubleshooting) -->
+	<logger name="org.apache.camel" level="WARN" />
+	<logger name="org.apache.cxf" level="WARN" />
+	<logger name="org.apache.camel.processor.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.service" level="WARN" />
+	<logger name="org.restlet" level="WARN" />
+	<logger name="org.apache.camel.component.restlet" level="WARN" />
+
+	<logger name="org.hibernate.validator" level="WARN" />
+	<logger name="org.hibernate" level="WARN" />
+	<logger name="org.hibernate.ejb" level="OFF" />
+
+	<!-- logback internals logging -->
+	<logger name="ch.qos.logback.classic" level="WARN" />
+	<logger name="ch.qos.logback.core" level="WARN" />
+
+	<logger name="org.eclipse.jetty" level="WARN" />
+
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<logger name="AuditRecord" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="AuditRecord_DirectCall" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="PerfTrackerRecord" level="INFO" additivity="false">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<logger name="org.onap.aai.interceptors.post" level="DEBUG"
+			additivity="false">
+		<appender-ref ref="asynctranslog" />
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.pre.SetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.post.ResetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.dmaap" level="DEBUG" additivity="false">
+		<appender-ref ref="dmaapAAIEventConsumer" />
+		<appender-ref ref="dmaapAAIEventConsumerDebug" />
+		<appender-ref ref="dmaapAAIEventConsumerMetric" />
+	</logger>
+
+	<logger name="org.apache" level="OFF" />
+	<logger name="org.zookeeper" level="OFF" />
+	<logger name="com.thinkaurelius" level="WARN" />
+	<logger name="com.att.aft.dme2" level="WARN" />
+
+	<!-- ============================================================================ -->
+	<!-- General EELF logger -->
+	<!-- ============================================================================ -->
+	<logger name="com.att.eelf" level="WARN" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+	</logger>
+
+	<root level="DEBUG">
+		<appender-ref ref="external" />
+	</root>
+</configuration>
diff --git a/plans/aai/resources/aai-resources/appconfig/realm.properties b/plans/aai/resources/aai-resources/appconfig/realm.properties
new file mode 100644
index 00000000..fb692cc3
--- /dev/null
+++ b/plans/aai/resources/aai-resources/appconfig/realm.properties
@@ -0,0 +1,12 @@
+# format : username: password[,rolename ...]
+# default username/password: AAI/AAI, MSO/MSO, ModelLoader/ModelLoader...
+AAI:OBF:1gfr1ev31gg7,admin
+MSO:OBF:1jzx1lz31k01,admin
+SDNC:OBF:1itr1i0l1i151isv,admin
+DCAE:OBF:1g8u1f9d1f991g8w,admin
+POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
+ASDC:OBF:1f991j0u1j001f9d,admin
+VID:OBF:1jm91i0v1jl9,admin
+APPC:OBF:1f991ksf1ksf1f9d,admin
+ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
+AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
diff --git a/plans/aai/resources/aai-traversal/appconfig/aai_keystore b/plans/aai/resources/aai-traversal/appconfig/aai_keystore
new file mode 100644
index 00000000..1ddef0c9
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/aai_keystore
diff --git a/plans/aai/resources/aai-traversal/appconfig/aaiconfig.properties b/plans/aai/resources/aai-traversal/appconfig/aaiconfig.properties
new file mode 100644
index 00000000..cef10903
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/aaiconfig.properties
@@ -0,0 +1,114 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+aai.config.checktime=1000
+
+# this could come from siteconfig.pl?
+aai.config.nodename=AutomaticallyOverwritten
+
+
+
+aai.auth.cspcookies_on=false
+aai.dbmodel.filename=ex5.json
+
+aai.server.url.base=https://aai.api.simpledemo.onap.org:8443/aai/
+aai.server.url=https://aai.api.simpledemo.onap.org:8443/aai/v11/
+aai.global.callback.url=https://aai.api.simpledemo.onap.org:8443/aai/
+
+aai.tools.enableBasicAuth=true
+aai.tools.username=AAI
+aai.tools.password=AAI
+
+aai.truststore.filename=aai_keystore
+aai.truststore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+aai.keystore.filename=aai_keystore
+aai.keystore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+
+
+aai.notification.current.version=v11
+aai.notificationEvent.default.status=UNPROCESSED
+aai.notificationEvent.default.eventType=AAI-EVENT
+aai.notificationEvent.default.domain=dev
+aai.notificationEvent.default.sourceName=aai
+aai.notificationEvent.default.sequenceNumber=0
+aai.notificationEvent.default.severity=NORMAL
+aai.notificationEvent.default.version=v11
+# This one lets us enable/disable resource-version checking on updates/deletes
+aai.resourceversion.enableflag=true
+aai.logging.maxStackTraceEntries=10
+aai.default.api.version=v11
+
+
+
+# Used by Model-processing code
+aai.model.delete.sleep.per.vtx.msec=500
+aai.model.query.resultset.maxcount=50
+aai.model.query.timeout.sec=90
+
+# Used by Data Grooming
+aai.grooming.default.max.file=150
+aai.grooming.default.sleep.minutes=7
+
+aai.model.proc.max.levels=50
+aai.edgeTag.proc.max.levels=50
+
+# for transaction log
+aai.logging.hbase.interceptor=true
+aai.logging.hbase.enabled=true
+aai.logging.hbase.logrequest=true
+aai.logging.hbase.logresponse=true
+
+# for gremlin server
+aai.server.rebind=g
+hbase.table.name=aailogging.dev
+hbase.table.timestamp.format=YYYYMMdd-HH:mm:ss:SSS
+hbase.zookeeper.quorum=localhost
+hbase.zookeeper.property.clientPort=2181
+hbase.zookeeper.znode.parent=/hbase
+
+aai.logging.trace.enabled=true
+aai.logging.trace.logrequest=false
+aai.logging.trace.logresponse=false
+
+aai.transaction.logging=true
+aai.transaction.logging.get=false
+aai.transaction.logging.post=false
+
+#timeout for traversal enabled flag
+aai.traversal.timeoutenabled=true
+
+#timeout app specific
+aai.traversal.timeout.appspecific=JUNITTESTAPP1,1|JUNITTESTAPP2,-1|DCAE-CCS,-1|DCAES,-1|AAI-FILEGEN-GFPIP,-1
+
+#default timeout limit added for traversal if not overridden (in ms)
+aai.traversal.timeoutlimit=180000
+
diff --git a/plans/aai/resources/aai-traversal/appconfig/application.properties b/plans/aai/resources/aai-traversal/appconfig/application.properties
new file mode 100644
index 00000000..0292512c
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/application.properties
@@ -0,0 +1,72 @@
+# The following info parameters are being referenced by ajsc6
+info.build.artifact=aai-traversal
+info.build.name=traversal
+info.build.description=Traversal Microservice
+info.build.version=1.2.0
+
+spring.application.name=aai-traversal
+spring.jersey.type=filter
+
+server.contextPath=/
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+spring.profiles.active=production,dmaap
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+
+#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
+#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
+#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+kubernetes.namespace=org-onap-aai
+
+# If you get an application startup failure that the port is already taken
+# If thats not it, please check if the key-store file path makes sense
+server.local.startpath=aai-traversal/src/main/resources/
+server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
+
+server.port=8446
+server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
+server.ssl.key-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.key-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.trust-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.trust-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.client-auth=want
+server.ssl.key-store-type=JKS
+
+# JMS bind address host port
+jms.bind.address=tcp://localhost:61647
+dmaap.ribbon.eureka.enabled=false
+dmaap.ribbon.listOfServers=mr.api.simpledemo.onap.org:3904
+# Number of milliseconds to wait before making ping requests again
+dmaap.ribbon.ServerListRefreshInterval=75000
+dmaap.ribbon.NFLoadBalancerPingInterval=75000
+dmaap.ribbon.NFLoadBalancerRuleClassName=com.netflix.loadbalancer.AvailabilityFilteringRule
+dmaap.ribbon.NFLoadBalancerPingClassName=org.onap.aai.config.HttpPingImpl
+dmaap.ribbon.EnableMarkingServerDownOnReachingFailureLimit=true
+dmaap.ribbon.ServerDownFailureLimit=1
+# This needs to be verified but it seems that adding this property should automatically
+# Make the dmaap client change the url from http to https depending on the server
+dmaap.ribbon.securePorts=3905
+
+# Custom Dmaap Specific Configuration
+dmaap.ribbon.username=
+dmaap.ribbon.password=
+dmaap.ribbon.health.endpoint=/topics/AAI-EVENT
+# Number of seconds to wait for the ping to work and might need to increase this if the pings are all failing
+dmaap.ribbon.pingport.timeout=3
+
+niws.loadbalancer.dmaap.filterCircuitTripped=true
+niws.loadbalancer.dmaap.connectionFailureCountThreshold=3
+niws.loadbalancer.dmaap.circuitTripMaxTimeoutSeconds=180
+#dmaap.ribbon.retryableStatusCodes=404,503
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetriesNextServer=2
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetries=2
+#dmaap.ribbon.retryableStatusCodes.OkToRetryOnAllOperations=true
diff --git a/plans/aai/resources/aai-traversal/appconfig/janusgraph-cached.properties b/plans/aai/resources/aai-traversal/appconfig/janusgraph-cached.properties
new file mode 100644
index 00000000..c2110f77
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/janusgraph-cached.properties
@@ -0,0 +1,43 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+#caching on
+cache.db-cache = true
+cache.db-cache-clean-wait = 20
+cache.db-cache-time = 180000
+cache.db-cache-size = 0.3
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/resources/aai-traversal/appconfig/janusgraph-realtime.properties b/plans/aai/resources/aai-traversal/appconfig/janusgraph-realtime.properties
new file mode 100644
index 00000000..4791431a
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/janusgraph-realtime.properties
@@ -0,0 +1,40 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+# Setting db-cache to false ensure the fastest propagation of changes across servers
+cache.db-cache = false
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/resources/aai-traversal/appconfig/localhost-access-logback.xml b/plans/aai/resources/aai-traversal/appconfig/localhost-access-logback.xml
new file mode 100644
index 00000000..a318796c
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/localhost-access-logback.xml
@@ -0,0 +1,62 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration>
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<appender name="ACCESS"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.CustomLogPatternLayoutEncoder">
+			<Pattern>%a %u %z [%t] "%m %U%q" %s %b %y %i{X-TransactionId} %i{X-FromAppId} %i{X-Forwarded-For} %i{X-AAI-SSL-Client-CN} %i{X-AAI-SSL-Client-OU} %i{X-AAI-SSL-Client-O} %i{X-AAI-SSL-Client-L} %i{X-AAI-SSL-Client-ST} %i{X-AAI-SSL-Client-C} %i{X-AAI-SSL-Client-NotBefore} %i{X-AAI-SSL-Client-NotAfter} %i{X-AAI-SSL-Client-DN} %D</Pattern>
+		</encoder>
+	</appender>
+	<appender-ref ref="ACCESS" />
+</configuration>
+
+<!-- 
+%a - Remote IP address
+%A - Local IP address
+%b - Bytes sent, excluding HTTP headers, or '-' if no bytes were sent
+%B - Bytes sent, excluding HTTP headers
+%h - Remote host name
+%H - Request protocol
+%l - Remote logical username from identd (always returns '-')
+%m - Request method
+%p - Local port
+%q - Query string (prepended with a '?' if it exists, otherwise an empty string
+%r - First line of the request
+%s - HTTP status code of the response
+%S - User session ID
+%t - Date and time, in Common Log Format format
+%u - Remote user that was authenticated
+%U - Requested URL path
+%v - Local server name
+%I - current request thread name (can compare later with stacktraces)
+
+%z - Custom pattern that parses the cert for the subject
+%y - Custom pattern determines rest or dme2
+ -->
\ No newline at end of file
diff --git a/plans/aai/resources/aai-traversal/appconfig/logback.xml b/plans/aai/resources/aai-traversal/appconfig/logback.xml
new file mode 100644
index 00000000..31bfe10c
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/logback.xml
@@ -0,0 +1,391 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration scan="true" scanPeriod="60 seconds" debug="false">
+	<statusListener class="ch.qos.logback.core.status.NopStatusListener" />
+
+	<property resource="application.properties" />
+
+	<property name="namespace" value="aai-traversal"/>
+
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<jmxConfigurator />
+	<property name="logDirectory" value="${AJSC_HOME}/logs" />
+	<property name="eelfLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfAuditLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfMetricLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{targetVirtualEntity}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<!--  <property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/> -->
+	<property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%ecompResponseCode|%ecompResponseDescription|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+    <property name="eelfTransLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{partnerName}:%m%n"/>
+
+    <conversionRule conversionWord="clr" converterClass="org.springframework.boot.logging.logback.ColorConverter" />
+    <conversionRule conversionWord="wex" converterClass="org.springframework.boot.logging.logback.WhitespaceThrowableProxyConverter" />
+    <conversionRule conversionWord="wEx" converterClass="org.springframework.boot.logging.logback.ExtendedWhitespaceThrowableProxyConverter" />
+	<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+		<encoder>
+			<pattern>
+				%clr(%d{yyyy-MM-dd HH:mm:ss.SSS}){faint} %clr(${LOG_LEVEL_PATTERN:-%5p}) %clr(${PID:- }){magenta} %clr(---){faint} %clr([%15.15t]){faint} %clr(%-40.40logger{39}){cyan} %clr(:){faint} %m%n${LOG_EXCEPTION_CONVERSION_WORD:-%wEx}
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="SANE" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/sane.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/sane.log.%d{yyyy-MM-dd}</fileNamePattern>
+		</rollingPolicy>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncSANE" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="SANE" />
+	</appender>
+
+	<appender name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/metrics.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="asyncMETRIC" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<appender name="DEBUG"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/debug.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncDEBUG" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="DEBUG" />
+	</appender>
+
+	<appender name="ERROR"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/rest/error.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfErrorLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncERROR" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="ERROR" />
+	</appender>
+
+	<appender name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/audit.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/audit.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfAuditLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncAUDIT" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender name="translog"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/translog.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/translog.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfTransLogPattern}</pattern>
+		</encoder>
+	</appender>
+	
+	<appender name="asynctranslog" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="translog" />
+	</appender>
+
+	<appender name="dmaapAAIEventConsumer"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/error.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="dmaapAAIEventConsumerDebug"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/debug.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="dmaapAAIEventConsumerMetric"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/metrics.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="external"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/external/external.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/external/external.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<logger name="org.onap.aai" level="DEBUG" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+		<appender-ref ref="asyncSANE" />
+	</logger>
+
+	<!-- Spring related loggers -->
+	<logger name="org.springframework" level="WARN" />
+	<logger name="org.springframework.beans" level="WARN" />
+	<logger name="org.springframework.web" level="WARN" />
+	<logger name="com.blog.spring.jms" level="WARN" />
+	<logger name="com.jayway.jsonpath" level="WARN" />
+
+	<!-- AJSC Services (bootstrap services) -->
+	<logger name="ajsc" level="WARN" />
+	<logger name="ajsc.RouteMgmtService" level="WARN" />
+	<logger name="ajsc.ComputeService" level="WARN" />
+	<logger name="ajsc.VandelayService" level="WARN" />
+	<logger name="ajsc.FilePersistenceService" level="WARN" />
+	<logger name="ajsc.UserDefinedJarService" level="WARN" />
+	<logger name="ajsc.UserDefinedBeansDefService" level="WARN" />
+	<logger name="ajsc.LoggingConfigurationService" level="WARN" />
+
+	<!-- AJSC related loggers (DME2 Registration, csi logging, restlet, servlet 
+		logging) -->
+	<logger name="org.codehaus.groovy" level="WARN" />
+	<logger name="com.att.scamper" level="WARN" />
+	<logger name="ajsc.utils" level="WARN" />
+	<logger name="ajsc.utils.DME2Helper" level="WARN" />
+	<logger name="ajsc.filters" level="WARN" />
+	<logger name="ajsc.beans.interceptors" level="WARN" />
+	<logger name="ajsc.restlet" level="WARN" />
+	<logger name="ajsc.servlet" level="WARN" />
+	<logger name="com.att.ajsc" level="WARN" />
+	<logger name="com.att.ajsc.csi.logging" level="WARN" />
+	<logger name="com.att.ajsc.filemonitor" level="WARN" />
+	<logger name="com.netflix.loadbalancer" level="WARN" />
+
+	<logger name="org.apache.zookeeper" level="OFF" />
+
+	<!-- Other Loggers that may help troubleshoot -->
+	<logger name="net.sf" level="WARN" />
+	<logger name="org.apache.commons.httpclient" level="WARN" />
+	<logger name="org.apache.commons" level="WARN" />
+	<logger name="org.apache.coyote" level="WARN" />
+	<logger name="org.apache.jasper" level="WARN" />
+
+	<!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging. 
+		May aid in troubleshooting) -->
+	<logger name="org.apache.camel" level="WARN" />
+	<logger name="org.apache.cxf" level="WARN" />
+	<logger name="org.apache.camel.processor.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.service" level="WARN" />
+	<logger name="org.restlet" level="WARN" />
+	<logger name="org.apache.camel.component.restlet" level="WARN" />
+
+	<logger name="org.hibernate.validator" level="WARN" />
+	<logger name="org.hibernate" level="WARN" />
+	<logger name="org.hibernate.ejb" level="OFF" />
+
+	<!-- logback internals logging -->
+	<logger name="ch.qos.logback.classic" level="WARN" />
+	<logger name="ch.qos.logback.core" level="WARN" />
+
+	<logger name="org.eclipse.jetty" level="WARN" />
+
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<logger name="AuditRecord" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="AuditRecord_DirectCall" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="PerfTrackerRecord" level="INFO" additivity="false">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<logger name="org.onap.aai.interceptors.post" level="DEBUG"
+			additivity="false">
+		<appender-ref ref="asynctranslog" />
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.pre.SetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.post.ResetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.dmaap" level="DEBUG" additivity="false">
+		<appender-ref ref="dmaapAAIEventConsumer" />
+		<appender-ref ref="dmaapAAIEventConsumerDebug" />
+		<appender-ref ref="dmaapAAIEventConsumerMetric" />
+	</logger>
+
+	<logger name="org.apache" level="OFF" />
+	<logger name="org.zookeeper" level="OFF" />
+	<logger name="com.thinkaurelius" level="WARN" />
+	<logger name="com.att.aft.dme2" level="WARN" />
+
+	<!-- ============================================================================ -->
+	<!-- General EELF logger -->
+	<!-- ============================================================================ -->
+	<logger name="com.att.eelf" level="WARN" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+	</logger>
+
+	<root level="DEBUG">
+		<appender-ref ref="external" />
+	</root>
+</configuration>
diff --git a/plans/aai/resources/aai-traversal/appconfig/realm.properties b/plans/aai/resources/aai-traversal/appconfig/realm.properties
new file mode 100644
index 00000000..fb692cc3
--- /dev/null
+++ b/plans/aai/resources/aai-traversal/appconfig/realm.properties
@@ -0,0 +1,12 @@
+# format : username: password[,rolename ...]
+# default username/password: AAI/AAI, MSO/MSO, ModelLoader/ModelLoader...
+AAI:OBF:1gfr1ev31gg7,admin
+MSO:OBF:1jzx1lz31k01,admin
+SDNC:OBF:1itr1i0l1i151isv,admin
+DCAE:OBF:1g8u1f9d1f991g8w,admin
+POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
+ASDC:OBF:1f991j0u1j001f9d,admin
+VID:OBF:1jm91i0v1jl9,admin
+APPC:OBF:1f991ksf1ksf1f9d,admin
+ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
+AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
diff --git a/plans/aai/resources/docker-compose.yml b/plans/aai/resources/docker-compose.yml
new file mode 100644
index 00000000..6f62e6ef
--- /dev/null
+++ b/plans/aai/resources/docker-compose.yml
@@ -0,0 +1,86 @@
+version: '2'
+services:
+  aai-resources.api.simpledemo.onap.org:
+    image: ${DOCKER_REGISTRY}/onap/aai-resources
+    hostname: aai-resources.api.simpledemo.onap.org
+    environment:
+      - LOCAL_USER_ID=${USER_ID}
+      - LOCAL_GROUP_ID=${GROUP_ID}
+      - SKIP_CREATE_DB_SCHEMA_AT_STARTUP=true
+    ports:
+      - 8447:8447
+    volumes:
+      - ${CURRENT_PWD}/aai-resources/appconfig/janusgraph-realtime.properties:/opt/app/aai-resources/resources/etc/appprops/janusgraph-realtime.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/janusgraph-cached.properties:/opt/app/aai-resources/resources/etc/appprops/janusgraph-cached.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/aaiconfig.properties:/opt/app/aai-resources/resources/etc/appprops/aaiconfig.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/application.properties:/opt/app/aai-resources/resources/application.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/logback.xml:/opt/app/aai-resources/resources/logback.xml
+      - ${CURRENT_PWD}/aai-resources/appconfig/localhost-access-logback.xml:/opt/app/aai-resources/resources/localhost-access-logback.xml
+      - ${CURRENT_PWD}/aai-resources/appconfig/aai_keystore:/opt/app/aai-resources/resources/etc/auth/aai_keystore
+      - ${CURRENT_PWD}/aai-resources/appconfig/realm.properties:/opt/app/aai-resources/resources/etc/auth/realm.properties
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+  aai-traversal.api.simpledemo.onap.org:
+    image: ${DOCKER_REGISTRY}/onap/aai-traversal
+    hostname: aai-traversal.api.simpledemo.onap.org
+    environment:
+      - LOCAL_USER_ID=${USER_ID}
+      - LOCAL_GROUP_ID=${GROUP_ID}
+      - DISABLE_UPDATE_QUERY=true
+    volumes:
+      - ${CURRENT_PWD}/aai-traversal/appconfig/janusgraph-realtime.properties:/opt/app/aai-traversal/resources/etc/appprops/janusgraph-realtime.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/janusgraph-cached.properties:/opt/app/aai-traversal/resources/etc/appprops/janusgraph-cached.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/aaiconfig.properties:/opt/app/aai-traversal/resources/etc/appprops/aaiconfig.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/application.properties:/opt/app/aai-traversal/resources/application.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/logback.xml:/opt/app/aai-traversal/resources/logback.xml
+      - ${CURRENT_PWD}/aai-traversal/appconfig/localhost-access-logback.xml:/opt/app/aai-traversal/resources/localhost-access-logback.xml
+      - ${CURRENT_PWD}/aai-traversal/appconfig/aai_keystore:/opt/app/aai-traversal/resources/etc/auth/aai_keystore
+      - ${CURRENT_PWD}/aai-traversal/appconfig/realm.properties:/opt/app/aai-traversal/resources/etc/auth/realm.properties
+    ports:
+      - 8446:8446
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+  aai.api.simpledemo.onap.org:
+    image: ${AAI_HAPROXY_IMAGE}:${HAPROXY_VERSION}
+    hostname: aai.api.simpledemo.onap.org
+    ports:
+      - 8443:8443
+    links:
+      - aai-resources.api.simpledemo.onap.org
+      - aai-traversal.api.simpledemo.onap.org
+    volumes:
+      - /dev/log:/dev/log
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+  aai.hbase.simpledemo.onap.org:
+    image: cassandra:2.1
+    hostname: aai.hbase.simpledemo.onap.org
+    ports:
+      - 7000:7000
+      - 7001:7001
+      - 7199:7199
+      - 9042:9042
+    environment:
+      - CASSANDRA_SEEDS=aai.hbase.simpledemo.onap.org
+      - CASSANDRA_DC=Heat
+      - CASSANDRA_RACK=Rack1
+      - CASSANDRA_AUTO_BOOTSTRAP=true
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+networks:
+  default:
+      driver: bridge
+      driver_opts:
+        com.docker.network.driver.mtu: ${MTU}
diff --git a/plans/aai/resources/setup.sh b/plans/aai/resources/setup.sh
new file mode 100644
index 00000000..bd5cb521
--- /dev/null
+++ b/plans/aai/resources/setup.sh
@@ -0,0 +1,113 @@
+#!/bin/bash
+#
+# Copyright © 2017 AT&T Intellectual Property.
+# All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+source ${SCRIPTS}/common_functions.sh
+
+NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt)
+NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt)
+NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt)
+DOCKER_IMAGE_VERSION=$(cat /opt/config/docker_version.txt)
+DOCKER_REGISTRY=${NEXUS_DOCKER_REPO}
+DOCKER_IMAGE_VERSION=1.2-STAGING-latest
+
+export CURRENT_PWD=$(pwd);
+
+function wait_for_container() {
+
+    CONTAINER_NAME="$1";
+    START_TEXT="$2";
+
+    TIMEOUT=360
+
+    # wait for the real startup
+    AMOUNT_STARTUP=$(docker logs ${CONTAINER_NAME} 2>&1 | grep "$START_TEXT" | wc -l)
+    while [[ ${AMOUNT_STARTUP} -ne 1 ]];
+    do
+        echo "Waiting for '$CONTAINER_NAME' deployment to finish ..."
+        AMOUNT_STARTUP=$(docker logs ${CONTAINER_NAME} 2>&1 | grep "$START_TEXT" | wc -l)
+        if [ "$TIMEOUT" = "0" ];
+        then
+            docker logs ${CONTAINER_NAME};
+            echo "ERROR: $CONTAINER_NAME deployment failed."
+            exit 1
+        fi
+        let TIMEOUT-=1
+        sleep 1
+    done
+}
+
+DOCKER_COMPOSE_CMD="docker-compose";
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1);
+export DOCKER_REGISTRY="nexus3.onap.org:10001";
+export AAI_HAPROXY_IMAGE="${AAI_HAPROXY_IMAGE:-aaionap/haproxy}";
+export HAPROXY_VERSION="${HAPROXY_VERSION:-1.2.0}";
+export HBASE_IMAGE="${HBASE_IMAGE:-aaionap/hbase}";
+export HBASE_VERSION="${HBASE_VERSION:-1.2.0}";
+
+docker pull ${HBASE_IMAGE}:${HBASE_VERSION};
+
+docker pull ${HBASE_IMAGE}:${HBASE_VERSION};
+docker pull ${DOCKER_REGISTRY}/onap/aai-resources:${DOCKER_IMAGE_VERSION};
+docker tag ${DOCKER_REGISTRY}/onap/aai-resources:${DOCKER_IMAGE_VERSION} ${DOCKER_REGISTRY}/onap/aai-resources:latest;
+
+docker pull ${DOCKER_REGISTRY}/onap/aai-traversal:${DOCKER_IMAGE_VERSION};
+docker tag ${DOCKER_REGISTRY}/onap/aai-traversal:${DOCKER_IMAGE_VERSION} ${DOCKER_REGISTRY}/onap/aai-traversal:latest;
+
+${DOCKER_COMPOSE_CMD} stop
+${DOCKER_COMPOSE_CMD} rm -f -v
+
+# Start the hbase where the data will be stored
+CASSANDRA_CONTAINER_NAME=$(${DOCKER_COMPOSE_CMD} up -d aai.hbase.simpledemo.onap.org 2>&1 | grep 'Creating' | grep -v 'volume' | grep -v 'network' | awk '{ print $2; }' | head -1);
+wait_for_container $CASSANDRA_CONTAINER_NAME 'Listening for thrift clients';
+
+USER_EXISTS=$(check_if_user_exists aaiadmin);
+
+function check_if_user_exists(){
+    local user_id=$1;
+
+    if [ -z "$user_id" ]; then
+        echo "Needs to provide at least one argument for check_if_user_exists func";
+        exit 1;
+    fi;
+
+    id -u ${user_id} > /dev/null 2>&1 && {
+        echo "1";
+    } || {
+        echo "0";
+    }
+}
+
+
+if [ "${USER_EXISTS}" -eq 0 ]; then
+        export USER_ID=9000;
+else
+        export USER_ID=$(id -u aaiadmin);
+fi;
+
+$DOCKER_COMPOSE_CMD run --rm aai-resources.api.simpledemo.onap.org createDBSchema.sh
+
+RESOURCES_CONTAINER_NAME=$(${DOCKER_COMPOSE_CMD} up -d aai-resources.api.simpledemo.onap.org 2>&1 | grep 'Creating' | grep -v 'volume' | grep -v 'network' | awk '{ print $2; }' | head -1);
+wait_for_container $RESOURCES_CONTAINER_NAME 'Resources Microservice Started';
+
+docker logs ${RESOURCES_CONTAINER_NAME};
+
+${DOCKER_COMPOSE_CMD} up -d aai-traversal.api.simpledemo.onap.org aai.api.simpledemo.onap.org
+echo "A&AI Microservices, resources and traversal, are up and running along with HAProxy";
+# Set the host ip for robot from the haproxy
+ROBOT_VARIABLES="-v HOST_IP:`ip addr show docker0 | head -3 | tail -1 | cut -d' ' -f6 | cut -d'/' -f1`"
diff --git a/plans/aai/resources/teardown.sh b/plans/aai/resources/teardown.sh
new file mode 100644
index 00000000..8dd6358d
--- /dev/null
+++ b/plans/aai/resources/teardown.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# Copyright © 2017 AT&T Intellectual Property.
+# Copyright © 2017 Amdocs
+# All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+DOCKER_COMPOSE_CMD="docker-compose";
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1);
+export DOCKER_REGISTRY="nexus3.onap.org:10001";
+
+$DOCKER_COMPOSE_CMD stop
+$DOCKER_COMPOSE_CMD rm -f -v
+
diff --git a/plans/aai/resources/testplan.txt b/plans/aai/resources/testplan.txt
new file mode 100644
index 00000000..1e8902a5
--- /dev/null
+++ b/plans/aai/resources/testplan.txt
@@ -0,0 +1,6 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+aai/resources/api_suite
+aai/resources/relationship_suite
+aai/resources/error_handling_suite
+aai/resources/db_edge_rule
\ No newline at end of file
diff --git a/plans/aai/search-data-service/appconfig/analysis-config.json b/plans/aai/search-data-service/appconfig/analysis-config.json
new file mode 100644
index 00000000..f98ea379
--- /dev/null
+++ b/plans/aai/search-data-service/appconfig/analysis-config.json
@@ -0,0 +1,32 @@
+[
+	{
+		"name": "whitespace_analyzer", 
+	 	"description": "A standard whitespace analyzer.",
+	 	"behaviours": [
+	 		"Tokenize the text using white space characters as delimeters.",
+	 		"Convert all characters to lower case.",
+	 		"Convert all alphanumeric and symbolic Unicode characters above the first 127 ASCII characters into their ASCII equivalents."
+	 	],
+	 	"tokenizer": "whitespace",
+	 	"filters": [
+	 		"lowercase",
+	 		"asciifolding"
+	 	]
+	},
+	{
+		"name": "ngram_analyzer", 
+	 	"description": "An analyzer which performs ngram filtering on the data stream.",
+	 	"behaviours": [
+	 		"Tokenize the text using white space characters as delimeters.",
+	 		"Convert all characters to lower case.",
+	 		"Convert all alphanumeric and symbolic Unicode characters above the first 127 ASCII characters into their ASCII equivalents.",
+	 		"Apply ngram filtering using the following values for minimum and maximum size in codepoints of a single n-gram: minimum = 1, maximum = 2."
+	 	],
+	 	"tokenizer": "whitespace",
+	 	"filters": [
+	 		"lowercase",
+	 		"asciifolding",
+	 		"ngram_filter"
+	 	]
+	}
+]
\ No newline at end of file
diff --git a/plans/aai/search-data-service/appconfig/auth/search_policy.json b/plans/aai/search-data-service/appconfig/auth/search_policy.json
new file mode 100644
index 00000000..72d8902f
--- /dev/null
+++ b/plans/aai/search-data-service/appconfig/auth/search_policy.json
@@ -0,0 +1,18 @@
+{
+	"roles": [
+		{
+			"name": "admin",
+			"functions": [
+				{
+					"name": "search", "methods": [ { "name": "GET" },{ "name": "DELETE" }, { "name": "PUT" }, { "name": "POST" } ]
+				}
+			],
+
+			"users": [
+				{
+					"username": "CN=ONAP, OU=ONAP, O=ONAP, L=Ottawa, ST=Ontario, C=CA"
+				}
+			]
+		}		
+	]
+}
diff --git a/plans/aai/search-data-service/appconfig/auth/tomcat_keystore b/plans/aai/search-data-service/appconfig/auth/tomcat_keystore
new file mode 100644
index 00000000..9eec841a
--- /dev/null
+++ b/plans/aai/search-data-service/appconfig/auth/tomcat_keystore
diff --git a/plans/aai/search-data-service/appconfig/elastic-search.properties b/plans/aai/search-data-service/appconfig/elastic-search.properties
new file mode 100644
index 00000000..5d9a37c0
--- /dev/null
+++ b/plans/aai/search-data-service/appconfig/elastic-search.properties
@@ -0,0 +1,6 @@
+# ElasticSearch Configuration
+
+es.cluster-name=ES_AAI
+es.http-port=9200
+
+## The IP address will be injected by the csit setup script
diff --git a/plans/aai/search-data-service/appconfig/filter-config.json b/plans/aai/search-data-service/appconfig/filter-config.json
new file mode 100644
index 00000000..e2d52858
--- /dev/null
+++ b/plans/aai/search-data-service/appconfig/filter-config.json
@@ -0,0 +1,7 @@
+[
+	{
+		"name": "ngram_filter",
+		"description": "Custom NGram Filter.",
+		"configuration": " \"type\": \"nGram\", \"min_gram\": 1, \"max_gram\": 50, \"token_chars\": [ \"letter\", \"digit\", \"punctuation\", \"symbol\" ]"
+	}
+]
\ No newline at end of file
diff --git a/plans/aai/search-data-service/docker-compose.yml b/plans/aai/search-data-service/docker-compose.yml
new file mode 100644
index 00000000..d48c9fa0
--- /dev/null
+++ b/plans/aai/search-data-service/docker-compose.yml
@@ -0,0 +1,26 @@
+version: '2'
+services:
+  aai.searchservice.simpledemo.openecomp.org:
+    image: ${DOCKER_REGISTRY}/openecomp/search-data-service
+    hostname: aai.searchservice.simpledemo.openecomp.org
+    container_name: search-service-container
+    volumes:
+      - ${SEARCH_LOGS}:/logs
+      - ./appconfig:/opt/app/search-data-service/config
+    ports:
+      - 9509:9509
+    environment:
+      - CONFIG_HOME=/opt/app/search-data-service/config/
+      - KEY_STORE_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
+      - KEY_MANAGER_PASSWORD=OBF:1y0q1uvc1uum1uvg1pil1pjl1uuq1uvk1uuu1y10
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+        
+networks:
+  default:
+      driver: bridge
+      driver_opts:
+        com.docker.network.driver.mtu: ${MTU}
diff --git a/plans/aai/search-data-service/setup.sh b/plans/aai/search-data-service/setup.sh
new file mode 100644
index 00000000..60703b65
--- /dev/null
+++ b/plans/aai/search-data-service/setup.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+#
+# Copyright © 2017 AT&T Intellectual Property.
+# Copyright © 2017 Amdocs
+# All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+echo search service setup script running
+
+export SEARCH_LOGS="/opt/aai/logroot/AAI-SEARCH";
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1);
+export DOCKER_REGISTRY="nexus3.onap.org:10001";
+
+# inject the current IP to the elastic-search config file
+echo "es.ip-address="`ip addr show docker0 | head -3 | tail -1 | cut -d' ' -f6 | cut -d'/' -f1` >> appconfig/elastic-search.properties
+
+docker run -d --name "stretchy" -p 9200:9200 -e "http.host=0.0.0.0" -e "transport.host=127.0.0.1" elasticsearch:2.4.6
+docker-compose -f docker-compose.yml up -d aai.searchservice.simpledemo.openecomp.org
+
+echo sleeping for 10 seconds while services start up
+sleep 10
+
+ROBOT_VARIABLES="-v HOST_IP:`ip addr show docker0 | head -3 | tail -1 | cut -d' ' -f6 | cut -d'/' -f1`"
+
diff --git a/plans/aai/search-data-service/teardown.sh b/plans/aai/search-data-service/teardown.sh
new file mode 100644
index 00000000..36d3e1da
--- /dev/null
+++ b/plans/aai/search-data-service/teardown.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+#
+# Copyright © 2017 AT&T Intellectual Property.
+# Copyright © 2017 Amdocs
+# All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+
+export SEARCH_LOGS="/opt/aai/logroot/AAI-SEARCH";
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1);
+export DOCKER_REGISTRY="nexus3.onap.org:10001";
+
+docker-compose -f docker-compose.yml stop
+docker stop stretchy
+docker-compose -f docker-compose.yml rm -f -v
+docker rm stretchy
+
+# remove the line we injected into the elastic-search config
+sed -i '$ d' appconfig/elastic-search.properties
diff --git a/plans/aai/search-data-service/testplan.txt b/plans/aai/search-data-service/testplan.txt
new file mode 100644
index 00000000..b0a72a0f
--- /dev/null
+++ b/plans/aai/search-data-service/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+aai/search-data-service/suite1
diff --git a/plans/aai/traversal/aai-resources/appconfig/aai_keystore b/plans/aai/traversal/aai-resources/appconfig/aai_keystore
new file mode 100644
index 00000000..1ddef0c9
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/aai_keystore
diff --git a/plans/aai/traversal/aai-resources/appconfig/aaiconfig.properties b/plans/aai/traversal/aai-resources/appconfig/aaiconfig.properties
new file mode 100644
index 00000000..435507a8
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/aaiconfig.properties
@@ -0,0 +1,119 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+aai.config.checktime=1000
+
+# this could come from siteconfig.pl?
+aai.config.nodename=AutomaticallyOverwritten
+
+
+
+aai.auth.cspcookies_on=false
+aai.dbmodel.filename=ex5.json
+
+aai.server.url.base=https://aai.api.simpledemo.onap.org:8443/aai/
+aai.server.url=https://aai.api.simpledemo.onap.org:8443/aai/v11/
+aai.global.callback.url=https://aai.api.simpledemo.onap.org:8443/aai/
+
+aai.tools.enableBasicAuth=true
+aai.tools.username=AAI
+aai.tools.password=AAI
+
+aai.truststore.filename=aai_keystore
+aai.truststore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+aai.keystore.filename=aai_keystore
+aai.keystore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+
+
+aai.notification.current.version=v11
+aai.notificationEvent.default.status=UNPROCESSED
+aai.notificationEvent.default.eventType=AAI-EVENT
+aai.notificationEvent.default.domain=dev
+aai.notificationEvent.default.sourceName=aai
+aai.notificationEvent.default.sequenceNumber=0
+aai.notificationEvent.default.severity=NORMAL
+aai.notificationEvent.default.version=v11
+# This one lets us enable/disable resource-version checking on updates/deletes
+aai.resourceversion.enableflag=true
+aai.logging.maxStackTraceEntries=10
+aai.default.api.version=v11
+
+
+
+# Used by Model-processing code
+aai.model.delete.sleep.per.vtx.msec=500
+aai.model.query.resultset.maxcount=50
+aai.model.query.timeout.sec=90
+
+# Used by Data Grooming
+aai.grooming.default.max.file=150
+aai.grooming.default.sleep.minutes=7
+
+aai.model.proc.max.levels=50
+aai.edgeTag.proc.max.levels=50
+
+# for transaction log
+aai.logging.hbase.interceptor=true
+aai.logging.hbase.enabled=true
+aai.logging.hbase.logrequest=true
+aai.logging.hbase.logresponse=true
+
+# for gremlin server
+aai.server.rebind=g
+hbase.table.name=aailogging.dev
+hbase.table.timestamp.format=YYYYMMdd-HH:mm:ss:SSS
+hbase.zookeeper.quorum=localhost
+hbase.zookeeper.property.clientPort=2181
+hbase.zookeeper.znode.parent=/hbase
+
+aai.logging.trace.enabled=true
+aai.logging.trace.logrequest=false
+aai.logging.trace.logresponse=false
+
+aai.transaction.logging=true
+aai.transaction.logging.get=false
+aai.transaction.logging.post=false
+
+#timeout for crud enabled flag
+aai.crud.timeoutenabled=true
+
+#timeout app specific -1 to bypass for that app id, a whole number to override the timeout with that value (in ms)
+aai.crud.timeout.appspecific=JUNITTESTAPP1,1|JUNITTESTAPP2,-1|DCAE-CCS,-1|DCAES,-1|AAIRctFeed,-1|NewvceCreator,-1|IANewvceCreator,-1|AAI-CSIOVALS,-1
+
+#default timeout limit added for crud if not overridden (in ms)
+aai.crud.timeoutlimit=100000
+#limit set for bulk consumer APIS
+aai.bulkconsumer.payloadlimit=30
+
+#uncomment and use header X-OverrideLimit with the value to override the bulk api limit
+#aai.bulkconsumer.payloadoverride=E6F04B93462CB5B0EDF41C05A9DDF5C3FE59748F
+aai.bulkconsumer.payloadoverride=false
diff --git a/plans/aai/traversal/aai-resources/appconfig/application.properties b/plans/aai/traversal/aai-resources/appconfig/application.properties
new file mode 100644
index 00000000..b9c51eaf
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/application.properties
@@ -0,0 +1,72 @@
+# The following info parameters are being referenced by ajsc6
+info.build.artifact=aai-resources
+info.build.name=resources
+info.build.description=Resources Microservice
+info.build.version=1.2.0
+
+spring.application.name=aai-resources
+spring.jersey.type=filter
+
+server.contextPath=/
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+spring.profiles.active=production,dmaap
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+
+#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
+#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
+#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+kubernetes.namespace=org-onap-aai
+
+# If you get an application startup failure that the port is already taken
+# If thats not it, please check if the key-store file path makes sense
+server.local.startpath=aai-resources/src/main/resources/
+server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
+
+server.port=8447
+server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
+server.ssl.key-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.key-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.trust-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.trust-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.client-auth=want
+server.ssl.key-store-type=JKS
+
+# JMS bind address host port
+jms.bind.address=tcp://localhost:61647
+dmaap.ribbon.eureka.enabled=false
+dmaap.ribbon.listOfServers=mr.api.simpledemo.onap.org:3904
+# Number of milliseconds to wait before making ping requests again
+dmaap.ribbon.ServerListRefreshInterval=75000
+dmaap.ribbon.NFLoadBalancerPingInterval=75000
+dmaap.ribbon.NFLoadBalancerRuleClassName=com.netflix.loadbalancer.AvailabilityFilteringRule
+dmaap.ribbon.NFLoadBalancerPingClassName=org.onap.aai.config.HttpPingImpl
+dmaap.ribbon.EnableMarkingServerDownOnReachingFailureLimit=true
+dmaap.ribbon.ServerDownFailureLimit=1
+# This needs to be verified but it seems that adding this property should automatically
+# Make the dmaap client change the url from http to https depending on the server
+dmaap.ribbon.securePorts=3905
+
+# Custom Dmaap Specific Configuration
+dmaap.ribbon.username=
+dmaap.ribbon.password=
+dmaap.ribbon.health.endpoint=/topics/AAI-EVENT
+# Number of seconds to wait for the ping to work and might need to increase this if the pings are all failing
+dmaap.ribbon.pingport.timeout=3
+
+niws.loadbalancer.dmaap.filterCircuitTripped=true
+niws.loadbalancer.dmaap.connectionFailureCountThreshold=3
+niws.loadbalancer.dmaap.circuitTripMaxTimeoutSeconds=180
+#dmaap.ribbon.retryableStatusCodes=404,503
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetriesNextServer=2
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetries=2
+#dmaap.ribbon.retryableStatusCodes.OkToRetryOnAllOperations=true
diff --git a/plans/aai/traversal/aai-resources/appconfig/janusgraph-cached.properties b/plans/aai/traversal/aai-resources/appconfig/janusgraph-cached.properties
new file mode 100644
index 00000000..c2110f77
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/janusgraph-cached.properties
@@ -0,0 +1,43 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+#caching on
+cache.db-cache = true
+cache.db-cache-clean-wait = 20
+cache.db-cache-time = 180000
+cache.db-cache-size = 0.3
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/traversal/aai-resources/appconfig/janusgraph-realtime.properties b/plans/aai/traversal/aai-resources/appconfig/janusgraph-realtime.properties
new file mode 100644
index 00000000..4791431a
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/janusgraph-realtime.properties
@@ -0,0 +1,40 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+# Setting db-cache to false ensure the fastest propagation of changes across servers
+cache.db-cache = false
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/traversal/aai-resources/appconfig/localhost-access-logback.xml b/plans/aai/traversal/aai-resources/appconfig/localhost-access-logback.xml
new file mode 100644
index 00000000..a318796c
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/localhost-access-logback.xml
@@ -0,0 +1,62 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration>
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<appender name="ACCESS"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.CustomLogPatternLayoutEncoder">
+			<Pattern>%a %u %z [%t] "%m %U%q" %s %b %y %i{X-TransactionId} %i{X-FromAppId} %i{X-Forwarded-For} %i{X-AAI-SSL-Client-CN} %i{X-AAI-SSL-Client-OU} %i{X-AAI-SSL-Client-O} %i{X-AAI-SSL-Client-L} %i{X-AAI-SSL-Client-ST} %i{X-AAI-SSL-Client-C} %i{X-AAI-SSL-Client-NotBefore} %i{X-AAI-SSL-Client-NotAfter} %i{X-AAI-SSL-Client-DN} %D</Pattern>
+		</encoder>
+	</appender>
+	<appender-ref ref="ACCESS" />
+</configuration>
+
+<!-- 
+%a - Remote IP address
+%A - Local IP address
+%b - Bytes sent, excluding HTTP headers, or '-' if no bytes were sent
+%B - Bytes sent, excluding HTTP headers
+%h - Remote host name
+%H - Request protocol
+%l - Remote logical username from identd (always returns '-')
+%m - Request method
+%p - Local port
+%q - Query string (prepended with a '?' if it exists, otherwise an empty string
+%r - First line of the request
+%s - HTTP status code of the response
+%S - User session ID
+%t - Date and time, in Common Log Format format
+%u - Remote user that was authenticated
+%U - Requested URL path
+%v - Local server name
+%I - current request thread name (can compare later with stacktraces)
+
+%z - Custom pattern that parses the cert for the subject
+%y - Custom pattern determines rest or dme2
+ -->
\ No newline at end of file
diff --git a/plans/aai/traversal/aai-resources/appconfig/logback.xml b/plans/aai/traversal/aai-resources/appconfig/logback.xml
new file mode 100644
index 00000000..ee7ee61a
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/logback.xml
@@ -0,0 +1,391 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration scan="true" scanPeriod="60 seconds" debug="false">
+	<statusListener class="ch.qos.logback.core.status.NopStatusListener" />
+
+	<property resource="application.properties" />
+
+	<property name="namespace" value="aai-resources"/>
+
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<jmxConfigurator />
+	<property name="logDirectory" value="${AJSC_HOME}/logs" />
+	<property name="eelfLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfAuditLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfMetricLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{targetVirtualEntity}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<!--  <property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/> -->
+	<property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%ecompResponseCode|%ecompResponseDescription|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+    <property name="eelfTransLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{partnerName}:%m%n"/>
+
+    <conversionRule conversionWord="clr" converterClass="org.springframework.boot.logging.logback.ColorConverter" />
+    <conversionRule conversionWord="wex" converterClass="org.springframework.boot.logging.logback.WhitespaceThrowableProxyConverter" />
+    <conversionRule conversionWord="wEx" converterClass="org.springframework.boot.logging.logback.ExtendedWhitespaceThrowableProxyConverter" />
+	<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+		<encoder>
+			<pattern>
+				%clr(%d{yyyy-MM-dd HH:mm:ss.SSS}){faint} %clr(${LOG_LEVEL_PATTERN:-%5p}) %clr(${PID:- }){magenta} %clr(---){faint} %clr([%15.15t]){faint} %clr(%-40.40logger{39}){cyan} %clr(:){faint} %m%n${LOG_EXCEPTION_CONVERSION_WORD:-%wEx}
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="SANE" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/sane.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/sane.log.%d{yyyy-MM-dd}</fileNamePattern>
+		</rollingPolicy>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncSANE" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="SANE" />
+	</appender>
+
+	<appender name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/metrics.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="asyncMETRIC" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<appender name="DEBUG"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/debug.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncDEBUG" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="DEBUG" />
+	</appender>
+
+	<appender name="ERROR"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/rest/error.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfErrorLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncERROR" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="ERROR" />
+	</appender>
+
+	<appender name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/audit.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/audit.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfAuditLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncAUDIT" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender name="translog"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/translog.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/translog.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfTransLogPattern}</pattern>
+		</encoder>
+	</appender>
+	
+	<appender name="asynctranslog" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="translog" />
+	</appender>
+
+	<appender name="dmaapAAIEventConsumer"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/error.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="dmaapAAIEventConsumerDebug"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/debug.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="dmaapAAIEventConsumerMetric"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/metrics.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="external"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/external/external.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/external/external.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<logger name="org.onap.aai" level="DEBUG" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+		<appender-ref ref="asyncSANE" />
+	</logger>
+
+	<!-- Spring related loggers -->
+	<logger name="org.springframework" level="WARN" />
+	<logger name="org.springframework.beans" level="WARN" />
+	<logger name="org.springframework.web" level="WARN" />
+	<logger name="com.blog.spring.jms" level="WARN" />
+	<logger name="com.jayway.jsonpath" level="WARN" />
+
+	<!-- AJSC Services (bootstrap services) -->
+	<logger name="ajsc" level="WARN" />
+	<logger name="ajsc.RouteMgmtService" level="WARN" />
+	<logger name="ajsc.ComputeService" level="WARN" />
+	<logger name="ajsc.VandelayService" level="WARN" />
+	<logger name="ajsc.FilePersistenceService" level="WARN" />
+	<logger name="ajsc.UserDefinedJarService" level="WARN" />
+	<logger name="ajsc.UserDefinedBeansDefService" level="WARN" />
+	<logger name="ajsc.LoggingConfigurationService" level="WARN" />
+
+	<!-- AJSC related loggers (DME2 Registration, csi logging, restlet, servlet 
+		logging) -->
+	<logger name="org.codehaus.groovy" level="WARN" />
+	<logger name="com.att.scamper" level="WARN" />
+	<logger name="ajsc.utils" level="WARN" />
+	<logger name="ajsc.utils.DME2Helper" level="WARN" />
+	<logger name="ajsc.filters" level="WARN" />
+	<logger name="ajsc.beans.interceptors" level="WARN" />
+	<logger name="ajsc.restlet" level="WARN" />
+	<logger name="ajsc.servlet" level="WARN" />
+	<logger name="com.att.ajsc" level="WARN" />
+	<logger name="com.att.ajsc.csi.logging" level="WARN" />
+	<logger name="com.att.ajsc.filemonitor" level="WARN" />
+	<logger name="com.netflix.loadbalancer" level="WARN" />
+
+	<logger name="org.apache.zookeeper" level="OFF" />
+
+	<!-- Other Loggers that may help troubleshoot -->
+	<logger name="net.sf" level="WARN" />
+	<logger name="org.apache.commons.httpclient" level="WARN" />
+	<logger name="org.apache.commons" level="WARN" />
+	<logger name="org.apache.coyote" level="WARN" />
+	<logger name="org.apache.jasper" level="WARN" />
+
+	<!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging. 
+		May aid in troubleshooting) -->
+	<logger name="org.apache.camel" level="WARN" />
+	<logger name="org.apache.cxf" level="WARN" />
+	<logger name="org.apache.camel.processor.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.service" level="WARN" />
+	<logger name="org.restlet" level="WARN" />
+	<logger name="org.apache.camel.component.restlet" level="WARN" />
+
+	<logger name="org.hibernate.validator" level="WARN" />
+	<logger name="org.hibernate" level="WARN" />
+	<logger name="org.hibernate.ejb" level="OFF" />
+
+	<!-- logback internals logging -->
+	<logger name="ch.qos.logback.classic" level="WARN" />
+	<logger name="ch.qos.logback.core" level="WARN" />
+
+	<logger name="org.eclipse.jetty" level="WARN" />
+
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<logger name="AuditRecord" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="AuditRecord_DirectCall" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="PerfTrackerRecord" level="INFO" additivity="false">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<logger name="org.onap.aai.interceptors.post" level="DEBUG"
+			additivity="false">
+		<appender-ref ref="asynctranslog" />
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.pre.SetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.post.ResetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.dmaap" level="DEBUG" additivity="false">
+		<appender-ref ref="dmaapAAIEventConsumer" />
+		<appender-ref ref="dmaapAAIEventConsumerDebug" />
+		<appender-ref ref="dmaapAAIEventConsumerMetric" />
+	</logger>
+
+	<logger name="org.apache" level="OFF" />
+	<logger name="org.zookeeper" level="OFF" />
+	<logger name="com.thinkaurelius" level="WARN" />
+	<logger name="com.att.aft.dme2" level="WARN" />
+
+	<!-- ============================================================================ -->
+	<!-- General EELF logger -->
+	<!-- ============================================================================ -->
+	<logger name="com.att.eelf" level="WARN" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+	</logger>
+
+	<root level="DEBUG">
+		<appender-ref ref="external" />
+	</root>
+</configuration>
diff --git a/plans/aai/traversal/aai-resources/appconfig/realm.properties b/plans/aai/traversal/aai-resources/appconfig/realm.properties
new file mode 100644
index 00000000..fb692cc3
--- /dev/null
+++ b/plans/aai/traversal/aai-resources/appconfig/realm.properties
@@ -0,0 +1,12 @@
+# format : username: password[,rolename ...]
+# default username/password: AAI/AAI, MSO/MSO, ModelLoader/ModelLoader...
+AAI:OBF:1gfr1ev31gg7,admin
+MSO:OBF:1jzx1lz31k01,admin
+SDNC:OBF:1itr1i0l1i151isv,admin
+DCAE:OBF:1g8u1f9d1f991g8w,admin
+POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
+ASDC:OBF:1f991j0u1j001f9d,admin
+VID:OBF:1jm91i0v1jl9,admin
+APPC:OBF:1f991ksf1ksf1f9d,admin
+ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
+AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
diff --git a/plans/aai/traversal/aai-traversal/appconfig/aai_keystore b/plans/aai/traversal/aai-traversal/appconfig/aai_keystore
new file mode 100644
index 00000000..1ddef0c9
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/aai_keystore
diff --git a/plans/aai/traversal/aai-traversal/appconfig/aaiconfig.properties b/plans/aai/traversal/aai-traversal/appconfig/aaiconfig.properties
new file mode 100644
index 00000000..cef10903
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/aaiconfig.properties
@@ -0,0 +1,114 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+####################################################################
+#  REMEMBER TO THINK ABOUT ENVIRONMENTAL DIFFERENCES AND CHANGE THE
+#  TEMPLATE AND *ALL* DATAFILES
+####################################################################
+
+aai.config.checktime=1000
+
+# this could come from siteconfig.pl?
+aai.config.nodename=AutomaticallyOverwritten
+
+
+
+aai.auth.cspcookies_on=false
+aai.dbmodel.filename=ex5.json
+
+aai.server.url.base=https://aai.api.simpledemo.onap.org:8443/aai/
+aai.server.url=https://aai.api.simpledemo.onap.org:8443/aai/v11/
+aai.global.callback.url=https://aai.api.simpledemo.onap.org:8443/aai/
+
+aai.tools.enableBasicAuth=true
+aai.tools.username=AAI
+aai.tools.password=AAI
+
+aai.truststore.filename=aai_keystore
+aai.truststore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+aai.keystore.filename=aai_keystore
+aai.keystore.passwd.x=OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+
+
+aai.notification.current.version=v11
+aai.notificationEvent.default.status=UNPROCESSED
+aai.notificationEvent.default.eventType=AAI-EVENT
+aai.notificationEvent.default.domain=dev
+aai.notificationEvent.default.sourceName=aai
+aai.notificationEvent.default.sequenceNumber=0
+aai.notificationEvent.default.severity=NORMAL
+aai.notificationEvent.default.version=v11
+# This one lets us enable/disable resource-version checking on updates/deletes
+aai.resourceversion.enableflag=true
+aai.logging.maxStackTraceEntries=10
+aai.default.api.version=v11
+
+
+
+# Used by Model-processing code
+aai.model.delete.sleep.per.vtx.msec=500
+aai.model.query.resultset.maxcount=50
+aai.model.query.timeout.sec=90
+
+# Used by Data Grooming
+aai.grooming.default.max.file=150
+aai.grooming.default.sleep.minutes=7
+
+aai.model.proc.max.levels=50
+aai.edgeTag.proc.max.levels=50
+
+# for transaction log
+aai.logging.hbase.interceptor=true
+aai.logging.hbase.enabled=true
+aai.logging.hbase.logrequest=true
+aai.logging.hbase.logresponse=true
+
+# for gremlin server
+aai.server.rebind=g
+hbase.table.name=aailogging.dev
+hbase.table.timestamp.format=YYYYMMdd-HH:mm:ss:SSS
+hbase.zookeeper.quorum=localhost
+hbase.zookeeper.property.clientPort=2181
+hbase.zookeeper.znode.parent=/hbase
+
+aai.logging.trace.enabled=true
+aai.logging.trace.logrequest=false
+aai.logging.trace.logresponse=false
+
+aai.transaction.logging=true
+aai.transaction.logging.get=false
+aai.transaction.logging.post=false
+
+#timeout for traversal enabled flag
+aai.traversal.timeoutenabled=true
+
+#timeout app specific
+aai.traversal.timeout.appspecific=JUNITTESTAPP1,1|JUNITTESTAPP2,-1|DCAE-CCS,-1|DCAES,-1|AAI-FILEGEN-GFPIP,-1
+
+#default timeout limit added for traversal if not overridden (in ms)
+aai.traversal.timeoutlimit=180000
+
diff --git a/plans/aai/traversal/aai-traversal/appconfig/application.properties b/plans/aai/traversal/aai-traversal/appconfig/application.properties
new file mode 100644
index 00000000..0292512c
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/application.properties
@@ -0,0 +1,72 @@
+# The following info parameters are being referenced by ajsc6
+info.build.artifact=aai-traversal
+info.build.name=traversal
+info.build.description=Traversal Microservice
+info.build.version=1.2.0
+
+spring.application.name=aai-traversal
+spring.jersey.type=filter
+
+server.contextPath=/
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+spring.profiles.active=production,dmaap
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+
+#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
+#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
+#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+kubernetes.namespace=org-onap-aai
+
+# If you get an application startup failure that the port is already taken
+# If thats not it, please check if the key-store file path makes sense
+server.local.startpath=aai-traversal/src/main/resources/
+server.basic.auth.location=${server.local.startpath}etc/auth/realm.properties
+
+server.port=8446
+server.ssl.enabled-protocols=TLSv1.1,TLSv1.2
+server.ssl.key-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.key-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.trust-store=${server.local.startpath}etc/auth/aai_keystore
+server.ssl.trust-store-password=password(OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0)
+server.ssl.client-auth=want
+server.ssl.key-store-type=JKS
+
+# JMS bind address host port
+jms.bind.address=tcp://localhost:61647
+dmaap.ribbon.eureka.enabled=false
+dmaap.ribbon.listOfServers=mr.api.simpledemo.onap.org:3904
+# Number of milliseconds to wait before making ping requests again
+dmaap.ribbon.ServerListRefreshInterval=75000
+dmaap.ribbon.NFLoadBalancerPingInterval=75000
+dmaap.ribbon.NFLoadBalancerRuleClassName=com.netflix.loadbalancer.AvailabilityFilteringRule
+dmaap.ribbon.NFLoadBalancerPingClassName=org.onap.aai.config.HttpPingImpl
+dmaap.ribbon.EnableMarkingServerDownOnReachingFailureLimit=true
+dmaap.ribbon.ServerDownFailureLimit=1
+# This needs to be verified but it seems that adding this property should automatically
+# Make the dmaap client change the url from http to https depending on the server
+dmaap.ribbon.securePorts=3905
+
+# Custom Dmaap Specific Configuration
+dmaap.ribbon.username=
+dmaap.ribbon.password=
+dmaap.ribbon.health.endpoint=/topics/AAI-EVENT
+# Number of seconds to wait for the ping to work and might need to increase this if the pings are all failing
+dmaap.ribbon.pingport.timeout=3
+
+niws.loadbalancer.dmaap.filterCircuitTripped=true
+niws.loadbalancer.dmaap.connectionFailureCountThreshold=3
+niws.loadbalancer.dmaap.circuitTripMaxTimeoutSeconds=180
+#dmaap.ribbon.retryableStatusCodes=404,503
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetriesNextServer=2
+#dmaap.ribbon.retryableStatusCodes.MaxAutoRetries=2
+#dmaap.ribbon.retryableStatusCodes.OkToRetryOnAllOperations=true
diff --git a/plans/aai/traversal/aai-traversal/appconfig/janusgraph-cached.properties b/plans/aai/traversal/aai-traversal/appconfig/janusgraph-cached.properties
new file mode 100644
index 00000000..c2110f77
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/janusgraph-cached.properties
@@ -0,0 +1,43 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+#caching on
+cache.db-cache = true
+cache.db-cache-clean-wait = 20
+cache.db-cache-time = 180000
+cache.db-cache-size = 0.3
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/traversal/aai-traversal/appconfig/janusgraph-realtime.properties b/plans/aai/traversal/aai-traversal/appconfig/janusgraph-realtime.properties
new file mode 100644
index 00000000..4791431a
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/janusgraph-realtime.properties
@@ -0,0 +1,40 @@
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+query.fast-property=true
+query.smart-limit=false
+
+# the following parameters are not reloaded automatically and require a manual bounce
+storage.backend=cassandra
+storage.hostname=aai.hbase.simpledemo.onap.org
+
+storage.cassandra.keyspace=aaigraph
+
+#schema.default=none
+storage.lock.wait-time=300
+storage.hbase.table=aaigraph-dev1.dev
+storage.hbase.ext.zookeeper.znode.parent=/hbase
+# Setting db-cache to false ensure the fastest propagation of changes across servers
+cache.db-cache = false
+
+#load graphson file on startup
+load.snapshot.file=false
diff --git a/plans/aai/traversal/aai-traversal/appconfig/localhost-access-logback.xml b/plans/aai/traversal/aai-traversal/appconfig/localhost-access-logback.xml
new file mode 100644
index 00000000..a318796c
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/localhost-access-logback.xml
@@ -0,0 +1,62 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration>
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<appender name="ACCESS"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${AJSC_HOME}/logs/ajsc-jetty/localhost_access.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.CustomLogPatternLayoutEncoder">
+			<Pattern>%a %u %z [%t] "%m %U%q" %s %b %y %i{X-TransactionId} %i{X-FromAppId} %i{X-Forwarded-For} %i{X-AAI-SSL-Client-CN} %i{X-AAI-SSL-Client-OU} %i{X-AAI-SSL-Client-O} %i{X-AAI-SSL-Client-L} %i{X-AAI-SSL-Client-ST} %i{X-AAI-SSL-Client-C} %i{X-AAI-SSL-Client-NotBefore} %i{X-AAI-SSL-Client-NotAfter} %i{X-AAI-SSL-Client-DN} %D</Pattern>
+		</encoder>
+	</appender>
+	<appender-ref ref="ACCESS" />
+</configuration>
+
+<!-- 
+%a - Remote IP address
+%A - Local IP address
+%b - Bytes sent, excluding HTTP headers, or '-' if no bytes were sent
+%B - Bytes sent, excluding HTTP headers
+%h - Remote host name
+%H - Request protocol
+%l - Remote logical username from identd (always returns '-')
+%m - Request method
+%p - Local port
+%q - Query string (prepended with a '?' if it exists, otherwise an empty string
+%r - First line of the request
+%s - HTTP status code of the response
+%S - User session ID
+%t - Date and time, in Common Log Format format
+%u - Remote user that was authenticated
+%U - Requested URL path
+%v - Local server name
+%I - current request thread name (can compare later with stacktraces)
+
+%z - Custom pattern that parses the cert for the subject
+%y - Custom pattern determines rest or dme2
+ -->
\ No newline at end of file
diff --git a/plans/aai/traversal/aai-traversal/appconfig/logback.xml b/plans/aai/traversal/aai-traversal/appconfig/logback.xml
new file mode 100644
index 00000000..31bfe10c
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/logback.xml
@@ -0,0 +1,391 @@
+<!--
+
+    ============LICENSE_START=======================================================
+    org.onap.aai
+    ================================================================================
+    Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+    ================================================================================
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+    ============LICENSE_END=========================================================
+
+    ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+-->
+<configuration scan="true" scanPeriod="60 seconds" debug="false">
+	<statusListener class="ch.qos.logback.core.status.NopStatusListener" />
+
+	<property resource="application.properties" />
+
+	<property name="namespace" value="aai-traversal"/>
+
+	<property name="AJSC_HOME" value="${AJSC_HOME:-.}" />
+	<jmxConfigurator />
+	<property name="logDirectory" value="${AJSC_HOME}/logs" />
+	<property name="eelfLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfAuditLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<property name="eelfMetricLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{targetVirtualEntity}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+	<!--  <property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n|\r\n', '^'}|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/> -->
+	<property name="eelfErrorLogPattern" value="%ecompStartTime|%X{requestId}|%-10t|%X{serviceName}|%X{partnerName}|%X{targetEntity}|%X{targetServiceName}|%ecompErrorCategory|%ecompResponseCode|%ecompResponseDescription|co=%X{component}:%replace(%replace(%m){'\\|', '!'}){'\r|\n', '^'}%n"/>
+    <property name="eelfTransLogPattern" value="%ecompStartTime|%date{yyyy-MM-dd'T'HH:mm:ss.SSSZ, UTC}|%X{requestId}|%X{serviceInstanceId}|%-10t|%X{serverName}|%X{serviceName}|%X{partnerName}|%X{statusCode}|%X{responseCode}|%replace(%replace(%X{responseDescription}){'\\|', '!'}){'\r|\n', '^'}|%X{instanceUUID}|%level|%X{severity}|%X{serverIpAddress}|%ecompElapsedTime|%X{server}|%X{clientIpAddress}|%eelfClassOfCaller|%X{unused}|%X{processKey}|%X{customField1}|%X{customField2}|%X{customField3}|%X{customField4}|co=%X{partnerName}:%m%n"/>
+
+    <conversionRule conversionWord="clr" converterClass="org.springframework.boot.logging.logback.ColorConverter" />
+    <conversionRule conversionWord="wex" converterClass="org.springframework.boot.logging.logback.WhitespaceThrowableProxyConverter" />
+    <conversionRule conversionWord="wEx" converterClass="org.springframework.boot.logging.logback.ExtendedWhitespaceThrowableProxyConverter" />
+	<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+		<encoder>
+			<pattern>
+				%clr(%d{yyyy-MM-dd HH:mm:ss.SSS}){faint} %clr(${LOG_LEVEL_PATTERN:-%5p}) %clr(${PID:- }){magenta} %clr(---){faint} %clr([%15.15t]){faint} %clr(%-40.40logger{39}){cyan} %clr(:){faint} %m%n${LOG_EXCEPTION_CONVERSION_WORD:-%wEx}
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="SANE" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/sane.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/sane.log.%d{yyyy-MM-dd}</fileNamePattern>
+		</rollingPolicy>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncSANE" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="SANE" />
+	</appender>
+
+	<appender name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/metrics.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="asyncMETRIC" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<appender name="DEBUG"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/debug.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncDEBUG" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="DEBUG" />
+	</appender>
+
+	<appender name="ERROR"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/rest/error.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfErrorLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncERROR" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="ERROR" />
+	</appender>
+
+	<appender name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/rest/audit.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/audit.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfAuditLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncAUDIT" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender name="translog"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<file>${logDirectory}/rest/translog.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/rest/translog.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfTransLogPattern}</pattern>
+		</encoder>
+	</appender>
+	
+	<appender name="asynctranslog" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>1000</queueSize>
+		<includeCallerData>true</includeCallerData>
+		<appender-ref ref="translog" />
+	</appender>
+
+	<appender name="dmaapAAIEventConsumer"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/error.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/error.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="dmaapAAIEventConsumerDebug"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>DEBUG</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/debug.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/debug.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="dmaapAAIEventConsumerMetric"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.LevelFilter">
+			<level>INFO</level>
+			<onMatch>ACCEPT</onMatch>
+			<onMismatch>DENY</onMismatch>
+		</filter>
+		<File>${logDirectory}/dmaapAAIEventConsumer/metrics.log</File>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/dmaapAAIEventConsumer/metrics.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfMetricLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="external"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>WARN</level>
+		</filter>
+		<file>${logDirectory}/external/external.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<fileNamePattern>${logDirectory}/external/external.log.%d{yyyy-MM-dd}
+			</fileNamePattern>
+		</rollingPolicy>
+		<encoder class="org.onap.aai.logging.EcompEncoder">
+			<pattern>${eelfLogPattern}</pattern>
+		</encoder>
+	</appender>
+	<logger name="org.onap.aai" level="DEBUG" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+		<appender-ref ref="asyncSANE" />
+	</logger>
+
+	<!-- Spring related loggers -->
+	<logger name="org.springframework" level="WARN" />
+	<logger name="org.springframework.beans" level="WARN" />
+	<logger name="org.springframework.web" level="WARN" />
+	<logger name="com.blog.spring.jms" level="WARN" />
+	<logger name="com.jayway.jsonpath" level="WARN" />
+
+	<!-- AJSC Services (bootstrap services) -->
+	<logger name="ajsc" level="WARN" />
+	<logger name="ajsc.RouteMgmtService" level="WARN" />
+	<logger name="ajsc.ComputeService" level="WARN" />
+	<logger name="ajsc.VandelayService" level="WARN" />
+	<logger name="ajsc.FilePersistenceService" level="WARN" />
+	<logger name="ajsc.UserDefinedJarService" level="WARN" />
+	<logger name="ajsc.UserDefinedBeansDefService" level="WARN" />
+	<logger name="ajsc.LoggingConfigurationService" level="WARN" />
+
+	<!-- AJSC related loggers (DME2 Registration, csi logging, restlet, servlet 
+		logging) -->
+	<logger name="org.codehaus.groovy" level="WARN" />
+	<logger name="com.att.scamper" level="WARN" />
+	<logger name="ajsc.utils" level="WARN" />
+	<logger name="ajsc.utils.DME2Helper" level="WARN" />
+	<logger name="ajsc.filters" level="WARN" />
+	<logger name="ajsc.beans.interceptors" level="WARN" />
+	<logger name="ajsc.restlet" level="WARN" />
+	<logger name="ajsc.servlet" level="WARN" />
+	<logger name="com.att.ajsc" level="WARN" />
+	<logger name="com.att.ajsc.csi.logging" level="WARN" />
+	<logger name="com.att.ajsc.filemonitor" level="WARN" />
+	<logger name="com.netflix.loadbalancer" level="WARN" />
+
+	<logger name="org.apache.zookeeper" level="OFF" />
+
+	<!-- Other Loggers that may help troubleshoot -->
+	<logger name="net.sf" level="WARN" />
+	<logger name="org.apache.commons.httpclient" level="WARN" />
+	<logger name="org.apache.commons" level="WARN" />
+	<logger name="org.apache.coyote" level="WARN" />
+	<logger name="org.apache.jasper" level="WARN" />
+
+	<!-- Camel Related Loggers (including restlet/servlet/jaxrs/cxf logging. 
+		May aid in troubleshooting) -->
+	<logger name="org.apache.camel" level="WARN" />
+	<logger name="org.apache.cxf" level="WARN" />
+	<logger name="org.apache.camel.processor.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.jaxrs.interceptor" level="WARN" />
+	<logger name="org.apache.cxf.service" level="WARN" />
+	<logger name="org.restlet" level="WARN" />
+	<logger name="org.apache.camel.component.restlet" level="WARN" />
+
+	<logger name="org.hibernate.validator" level="WARN" />
+	<logger name="org.hibernate" level="WARN" />
+	<logger name="org.hibernate.ejb" level="OFF" />
+
+	<!-- logback internals logging -->
+	<logger name="ch.qos.logback.classic" level="WARN" />
+	<logger name="ch.qos.logback.core" level="WARN" />
+
+	<logger name="org.eclipse.jetty" level="WARN" />
+
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter" />
+		<file>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.log
+		</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/perf-audit/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<logger name="AuditRecord" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="AuditRecord_DirectCall" level="INFO" additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger name="PerfTrackerRecord" level="INFO" additivity="false">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<logger name="org.onap.aai.interceptors.post" level="DEBUG"
+			additivity="false">
+		<appender-ref ref="asynctranslog" />
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.pre.SetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.interceptors.post.ResetLoggingContext" level="DEBUG">
+		<appender-ref ref="asyncAUDIT"/>
+	</logger>
+
+	<logger name="org.onap.aai.dmaap" level="DEBUG" additivity="false">
+		<appender-ref ref="dmaapAAIEventConsumer" />
+		<appender-ref ref="dmaapAAIEventConsumerDebug" />
+		<appender-ref ref="dmaapAAIEventConsumerMetric" />
+	</logger>
+
+	<logger name="org.apache" level="OFF" />
+	<logger name="org.zookeeper" level="OFF" />
+	<logger name="com.thinkaurelius" level="WARN" />
+	<logger name="com.att.aft.dme2" level="WARN" />
+
+	<!-- ============================================================================ -->
+	<!-- General EELF logger -->
+	<!-- ============================================================================ -->
+	<logger name="com.att.eelf" level="WARN" additivity="false">
+		<appender-ref ref="asyncDEBUG" />
+		<appender-ref ref="asyncERROR" />
+		<appender-ref ref="asyncMETRIC" />
+	</logger>
+
+	<root level="DEBUG">
+		<appender-ref ref="external" />
+	</root>
+</configuration>
diff --git a/plans/aai/traversal/aai-traversal/appconfig/realm.properties b/plans/aai/traversal/aai-traversal/appconfig/realm.properties
new file mode 100644
index 00000000..fb692cc3
--- /dev/null
+++ b/plans/aai/traversal/aai-traversal/appconfig/realm.properties
@@ -0,0 +1,12 @@
+# format : username: password[,rolename ...]
+# default username/password: AAI/AAI, MSO/MSO, ModelLoader/ModelLoader...
+AAI:OBF:1gfr1ev31gg7,admin
+MSO:OBF:1jzx1lz31k01,admin
+SDNC:OBF:1itr1i0l1i151isv,admin
+DCAE:OBF:1g8u1f9d1f991g8w,admin
+POLICY:OBF:1mk61i171ima1im41i0j1mko,admin
+ASDC:OBF:1f991j0u1j001f9d,admin
+VID:OBF:1jm91i0v1jl9,admin
+APPC:OBF:1f991ksf1ksf1f9d,admin
+ModelLoader:OBF:1qvu1v2h1sov1sar1wfw1j7j1wg21saj1sov1v1x1qxw,admin
+AaiUI:OBF:1gfr1p571unz1p4j1gg7,admin
diff --git a/plans/aai/traversal/docker-compose.yml b/plans/aai/traversal/docker-compose.yml
new file mode 100644
index 00000000..6f62e6ef
--- /dev/null
+++ b/plans/aai/traversal/docker-compose.yml
@@ -0,0 +1,86 @@
+version: '2'
+services:
+  aai-resources.api.simpledemo.onap.org:
+    image: ${DOCKER_REGISTRY}/onap/aai-resources
+    hostname: aai-resources.api.simpledemo.onap.org
+    environment:
+      - LOCAL_USER_ID=${USER_ID}
+      - LOCAL_GROUP_ID=${GROUP_ID}
+      - SKIP_CREATE_DB_SCHEMA_AT_STARTUP=true
+    ports:
+      - 8447:8447
+    volumes:
+      - ${CURRENT_PWD}/aai-resources/appconfig/janusgraph-realtime.properties:/opt/app/aai-resources/resources/etc/appprops/janusgraph-realtime.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/janusgraph-cached.properties:/opt/app/aai-resources/resources/etc/appprops/janusgraph-cached.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/aaiconfig.properties:/opt/app/aai-resources/resources/etc/appprops/aaiconfig.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/application.properties:/opt/app/aai-resources/resources/application.properties
+      - ${CURRENT_PWD}/aai-resources/appconfig/logback.xml:/opt/app/aai-resources/resources/logback.xml
+      - ${CURRENT_PWD}/aai-resources/appconfig/localhost-access-logback.xml:/opt/app/aai-resources/resources/localhost-access-logback.xml
+      - ${CURRENT_PWD}/aai-resources/appconfig/aai_keystore:/opt/app/aai-resources/resources/etc/auth/aai_keystore
+      - ${CURRENT_PWD}/aai-resources/appconfig/realm.properties:/opt/app/aai-resources/resources/etc/auth/realm.properties
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+  aai-traversal.api.simpledemo.onap.org:
+    image: ${DOCKER_REGISTRY}/onap/aai-traversal
+    hostname: aai-traversal.api.simpledemo.onap.org
+    environment:
+      - LOCAL_USER_ID=${USER_ID}
+      - LOCAL_GROUP_ID=${GROUP_ID}
+      - DISABLE_UPDATE_QUERY=true
+    volumes:
+      - ${CURRENT_PWD}/aai-traversal/appconfig/janusgraph-realtime.properties:/opt/app/aai-traversal/resources/etc/appprops/janusgraph-realtime.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/janusgraph-cached.properties:/opt/app/aai-traversal/resources/etc/appprops/janusgraph-cached.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/aaiconfig.properties:/opt/app/aai-traversal/resources/etc/appprops/aaiconfig.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/application.properties:/opt/app/aai-traversal/resources/application.properties
+      - ${CURRENT_PWD}/aai-traversal/appconfig/logback.xml:/opt/app/aai-traversal/resources/logback.xml
+      - ${CURRENT_PWD}/aai-traversal/appconfig/localhost-access-logback.xml:/opt/app/aai-traversal/resources/localhost-access-logback.xml
+      - ${CURRENT_PWD}/aai-traversal/appconfig/aai_keystore:/opt/app/aai-traversal/resources/etc/auth/aai_keystore
+      - ${CURRENT_PWD}/aai-traversal/appconfig/realm.properties:/opt/app/aai-traversal/resources/etc/auth/realm.properties
+    ports:
+      - 8446:8446
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+  aai.api.simpledemo.onap.org:
+    image: ${AAI_HAPROXY_IMAGE}:${HAPROXY_VERSION}
+    hostname: aai.api.simpledemo.onap.org
+    ports:
+      - 8443:8443
+    links:
+      - aai-resources.api.simpledemo.onap.org
+      - aai-traversal.api.simpledemo.onap.org
+    volumes:
+      - /dev/log:/dev/log
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+  aai.hbase.simpledemo.onap.org:
+    image: cassandra:2.1
+    hostname: aai.hbase.simpledemo.onap.org
+    ports:
+      - 7000:7000
+      - 7001:7001
+      - 7199:7199
+      - 9042:9042
+    environment:
+      - CASSANDRA_SEEDS=aai.hbase.simpledemo.onap.org
+      - CASSANDRA_DC=Heat
+      - CASSANDRA_RACK=Rack1
+      - CASSANDRA_AUTO_BOOTSTRAP=true
+    logging:
+      driver: "json-file"
+      options:
+        max-size: "30m"
+        max-file: "5"
+networks:
+  default:
+      driver: bridge
+      driver_opts:
+        com.docker.network.driver.mtu: ${MTU}
diff --git a/plans/aai/traversal/setup.sh b/plans/aai/traversal/setup.sh
new file mode 100644
index 00000000..70dda84b
--- /dev/null
+++ b/plans/aai/traversal/setup.sh
@@ -0,0 +1,119 @@
+#!/bin/bash
+#
+# Copyright © 2017 AT&T Intellectual Property.
+# All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+source ${SCRIPTS}/common_functions.sh
+
+NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt)
+NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt)
+NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt)
+DOCKER_IMAGE_VERSION=$(cat /opt/config/docker_version.txt)
+DOCKER_REGISTRY=${NEXUS_DOCKER_REPO}
+DOCKER_IMAGE_VERSION=1.2-STAGING-latest
+
+export CURRENT_PWD=$(pwd);
+
+function wait_for_container() {
+
+    CONTAINER_NAME="$1";
+    START_TEXT="$2";
+
+    TIMEOUT=360
+
+    # wait for the real startup
+    AMOUNT_STARTUP=$(docker logs ${CONTAINER_NAME} 2>&1 | grep "$START_TEXT" | wc -l)
+    while [[ ${AMOUNT_STARTUP} -ne 1 ]];
+    do
+        echo "Waiting for '$CONTAINER_NAME' deployment to finish ..."
+        AMOUNT_STARTUP=$(docker logs ${CONTAINER_NAME} 2>&1 | grep "$START_TEXT" | wc -l)
+        if [ "$TIMEOUT" = "0" ];
+        then
+            docker logs ${CONTAINER_NAME};
+            echo "ERROR: $CONTAINER_NAME deployment failed."
+            exit 1
+        fi
+        let TIMEOUT-=1
+        sleep 1
+    done
+}
+
+DOCKER_COMPOSE_CMD="docker-compose";
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1);
+export DOCKER_REGISTRY="nexus3.onap.org:10001";
+export AAI_HAPROXY_IMAGE="${AAI_HAPROXY_IMAGE:-aaionap/haproxy}";
+export HAPROXY_VERSION="${HAPROXY_VERSION:-1.2.0}";
+export HBASE_IMAGE="${HBASE_IMAGE:-aaionap/hbase}";
+export HBASE_VERSION="${HBASE_VERSION:-1.2.0}";
+
+docker pull ${HBASE_IMAGE}:${HBASE_VERSION};
+
+docker pull ${DOCKER_REGISTRY}/onap/aai-resources:${DOCKER_IMAGE_VERSION};
+docker tag ${DOCKER_REGISTRY}/onap/aai-resources:${DOCKER_IMAGE_VERSION} ${DOCKER_REGISTRY}/onap/aai-resources:latest;
+
+docker pull ${DOCKER_REGISTRY}/onap/aai-traversal:${DOCKER_IMAGE_VERSION};
+docker tag ${DOCKER_REGISTRY}/onap/aai-traversal:${DOCKER_IMAGE_VERSION} ${DOCKER_REGISTRY}/onap/aai-traversal:latest;
+
+${DOCKER_COMPOSE_CMD} stop
+${DOCKER_COMPOSE_CMD} rm -f -v
+
+# Start the hbase where the data will be stored
+CASSANDRA_CONTAINER_NAME=$(${DOCKER_COMPOSE_CMD} up -d aai.hbase.simpledemo.onap.org 2>&1 | grep 'Creating' | grep -v 'volume' | grep -v 'network' | awk '{ print $2; }' | head -1);
+wait_for_container $CASSANDRA_CONTAINER_NAME 'Listening for thrift clients';
+
+USER_EXISTS=$(check_if_user_exists aaiadmin);
+
+function check_if_user_exists(){
+    local user_id=$1;
+
+    if [ -z "$user_id" ]; then
+        echo "Needs to provide at least one argument for check_if_user_exists func";
+        exit 1;
+    fi;
+
+    id -u ${user_id} > /dev/null 2>&1 && {
+        echo "1";
+    } || {
+        echo "0";
+    }
+}
+
+
+if [ "${USER_EXISTS}" -eq 0 ]; then
+        export USER_ID=9000;
+        export GROUP_ID=9000;
+else
+        export USER_ID=$(id -u aaiadmin);
+        export GROUP_ID=$(id -g aaiadmin);
+fi;
+
+$DOCKER_COMPOSE_CMD run --rm aai-resources.api.simpledemo.onap.org createDBSchema.sh
+
+RESOURCES_CONTAINER_NAME=$(${DOCKER_COMPOSE_CMD} up -d aai-resources.api.simpledemo.onap.org 2>&1 | grep 'Creating' | grep -v 'volume' | grep -v 'network' | awk '{ print $2; }' | head -1);
+wait_for_container $RESOURCES_CONTAINER_NAME 'Resources Microservice Started';
+
+${DOCKER_COMPOSE_CMD} up -d aai-traversal.api.simpledemo.onap.org aai.api.simpledemo.onap.org
+TRAVERSAL_CONTAINER_NAME=$(echo $RESOURCES_CONTAINER_NAME | sed 's/aai-resources/aai-traversal/g');
+
+$DOCKER_COMPOSE_CMD run --rm aai-traversal.api.simpledemo.onap.org install/updateQueryData.sh
+
+echo "A&AI Microservices, resources and traversal, are up and running along with HAProxy";
+
+wait_for_container $TRAVERSAL_CONTAINER_NAME 'Traversal Microservice Started';
+
+# Set the host ip for robot from the haproxy
+ROBOT_VARIABLES="-v HOST_IP:`ip addr show docker0 | head -3 | tail -1 | cut -d' ' -f6 | cut -d'/' -f1`"
diff --git a/plans/aai/traversal/teardown.sh b/plans/aai/traversal/teardown.sh
new file mode 100644
index 00000000..8dd6358d
--- /dev/null
+++ b/plans/aai/traversal/teardown.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# Copyright © 2017 AT&T Intellectual Property.
+# Copyright © 2017 Amdocs
+# All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+
+DOCKER_COMPOSE_CMD="docker-compose";
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1);
+export DOCKER_REGISTRY="nexus3.onap.org:10001";
+
+$DOCKER_COMPOSE_CMD stop
+$DOCKER_COMPOSE_CMD rm -f -v
+
diff --git a/plans/aai/traversal/testplan.txt b/plans/aai/traversal/testplan.txt
new file mode 100644
index 00000000..9b48bf9b
--- /dev/null
+++ b/plans/aai/traversal/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+aai/traversal/suite1
diff --git a/plans/appc/healthcheck/bundle_query.sh b/plans/appc/healthcheck/bundle_query.sh
new file mode 100755
index 00000000..3801d0a1
--- /dev/null
+++ b/plans/appc/healthcheck/bundle_query.sh
@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+
+num_bundles=$(docker exec appc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+#num_failed_bundles=$(docker exec appc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure | wc -l)
+num_failed_bundles=$(docker exec appc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure | wc -l)
+failed_bundles=$(docker exec appc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure)
+
+echo "There are $num_failed_bundles failed bundles out of $num_bundles installed bundles."
+
+if [ "$num_failed_bundles" -ge 1 ] || [ "$num_bundles" == "" ]; then
+  echo "There are $num_bundles bundles with $num_failed_bundles in a failed state. "
+  echo "The following bundle(s) are in a failed state: "
+  echo "  $failed_bundles"
+  exit 1;
+fi
+
+exit 0
diff --git a/plans/appc/healthcheck/db_query.sh b/plans/appc/healthcheck/db_query.sh
new file mode 100755
index 00000000..70829a13
--- /dev/null
+++ b/plans/appc/healthcheck/db_query.sh
@@ -0,0 +1,66 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+sdnctl_num_tables=$(docker exec -i sdnc_db_container mysql -s -D sdnctl -u sdnctl -pgamma <<<'show tables;' 2>/dev/null | grep -v ERROR | wc -l)
+
+appcctl_num_tables=$(docker exec -i sdnc_db_container mysql -s -D appcctl -u appcctl -pappcctl <<<'show tables;' 2>/dev/null | grep -v ERROR | wc -l)
+
+
+
+docker exec -i sdnc_db_container mysql -s -D sdnctl -u sdnctl -pgamma <<<"show tables" 2>/dev/null | ( while read table_name; do 
+export $table_name="$(docker exec -i sdnc_db_container mysql -s -D sdnctl -u sdnctl -pgamma <<<"select count(*) from $table_name" 2>/dev/null)"
+done 
+
+if [ "$sdnctl_num_tables" -ge "1" ]; then
+  echo "There are $sdnctl_num_tables tables in the sdnctl database. "
+else
+  echo "Database sdnctl is not available."
+  exit 1;
+fi
+
+if [ "$appcctl_num_tables" -ge "1" ]; then
+  echo "There is $appcctl_num_tables table in the appcctl database. "
+else
+  echo "Database appcctl is not available."
+  exit 1;
+fi
+
+#if [ "$NODE_TYPES" -eq "0" ]; then
+#  echo "There is no data in table NODE_TYPES. "
+#  exit 1;
+#fi
+
+#if [ "$SVC_LOGIC" -eq "0" ] ; then
+#  echo "There is no data in table SVC_LOGIC. "
+#  exit 1;
+#fi
+
+#if [ "$VNF_DG_MAPPING" -eq "0" ]; then
+#  echo "There is no data in table VNF_DG_MAPPING. "
+#  exit 1;
+#fi 
+
+echo "Expected table data is present."
+exit 0 )
+
+if [ "$?" -eq "1" ]; then
+  exit 1;
+fi
+
+exit 0
diff --git a/plans/appc/healthcheck/health_check.sh b/plans/appc/healthcheck/health_check.sh
new file mode 100755
index 00000000..775188f6
--- /dev/null
+++ b/plans/appc/healthcheck/health_check.sh
@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-appc" -H "X-TransactionId: csit-appc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck )
+
+if [ "$response" == "200" ]; then
+    echo "APPC health check passed."
+    exit 0;
+fi
+
+echo "APPC health check failed with response code ${response}."
+exit 1
diff --git a/plans/appc/healthcheck/setup.sh b/plans/appc/healthcheck/setup.sh
new file mode 100755
index 00000000..da441ea5
--- /dev/null
+++ b/plans/appc/healthcheck/setup.sh
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+source ${WORKSPACE}/test/csit/scripts/appc/script1.sh
+
+export APPC_DOCKER_IMAGE_VERSION=1.4.0-SNAPSHOT-latest
+export CCSDK_DOCKER_IMAGE_VERSION=0.2-STAGING-latest
+export BRANCH=master
+export SOLUTION_NAME=onap
+
+export NEXUS_USERNAME=docker
+export NEXUS_PASSWD=docker
+export NEXUS_DOCKER_REPO=nexus3.onap.org:10001
+export DMAAP_TOPIC=AUTO
+
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
+
+if [ "$MTU" == "" ]; then
+	  export MTU="1450"
+fi
+
+
+# Clone APPC repo to get docker-compose for APPC
+mkdir -p $WORKSPACE/archives/appc
+cd $WORKSPACE/archives
+git clone -b $BRANCH --single-branch http://gerrit.onap.org/r/appc/deployment.git appc
+cd $WORKSPACE/archives/appc
+git pull
+cd $WORKSPACE/archives/appc/docker-compose
+sed -i "s/DMAAP_TOPIC_ENV=.*/DMAAP_TOPIC_ENV="$DMAAP_TOPIC"/g" docker-compose.yml
+docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+docker pull $NEXUS_DOCKER_REPO/${SOLUTION_NAME}/appc-image:$APPC_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/${SOLUTION_NAME}/appc-image:$APPC_DOCKER_IMAGE_VERSION ${SOLUTION_NAME}/appc-image:latest
+docker pull $NEXUS_DOCKER_REPO/${SOLUTION_NAME}/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/${SOLUTION_NAME}/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION ${SOLUTION_NAME}/ccsdk-dgbuilder-image:latest
+docker pull $NEXUS_DOCKER_REPO/${SOLUTION_NAME}/appc-cdt-image:$APPC_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/${SOLUTION_NAME}/appc-cdt-image:$APPC_DOCKER_IMAGE_VERSION ${SOLUTION_NAME}/appc-cdt-image:latest
+
+# start APPC containers with docker compose and configuration from docker-compose.yml
+docker-compose up -d
+# WAIT 5 minutes maximum and test every 5 seconds if APPC is up using HealthCheck API
+TIME_OUT=2000
+INTERVAL=30
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+
+startODL_status=$(docker exec appc_controller_container ps -e | grep startODL | wc -l)
+waiting_bundles=$(docker exec appc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Waiting | wc -l)
+run_level=$(docker exec appc_controller_container /opt/opendaylight/current/bin/client system:start-level)
+
+  if [ "$run_level" == "Level 100" ] && [ "$startODL_status" -lt "1" ] && [ "$waiting_bundles" -lt "1" ] ; then
+    echo APPC started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if APPC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+  echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+sleep 300
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
diff --git a/plans/appc/healthcheck/teardown.sh b/plans/appc/healthcheck/teardown.sh
new file mode 100755
index 00000000..94d1bc77
--- /dev/null
+++ b/plans/appc/healthcheck/teardown.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh appc_controller_container
+kill-instance.sh ccsdk_dgbuilder_container
+kill-instance.sh appc_cdt_container
+kill-instance.sh sdnc_db_container
+
+# $WORKSPACE/archives/appc deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/appc/healthcheck/testplan.txt b/plans/appc/healthcheck/testplan.txt
new file mode 100644
index 00000000..97d82786
--- /dev/null
+++ b/plans/appc/healthcheck/testplan.txt
@@ -0,0 +1,5 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+appc/healthcheck
+appc/cdt
+
diff --git a/plans/ccsdk/healthcheck/health_check.sh b/plans/ccsdk/healthcheck/health_check.sh
new file mode 100644
index 00000000..ffc766fe
--- /dev/null
+++ b/plans/ccsdk/healthcheck/health_check.sh
@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+unset http_proxy https_proxy
+
+response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-ccsdk" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8383/restconf/operations/SLI-API:healthcheck )
+
+if [ "$response" == "200" ]; then
+    echo "CCSDK health check passed."
+    exit 0;
+fi
+
+echo "CCSDK health check failed with response code ${response}."
+exit 1
diff --git a/plans/ccsdk/healthcheck/setup.sh b/plans/ccsdk/healthcheck/setup.sh
new file mode 100644
index 00000000..bdb5b550
--- /dev/null
+++ b/plans/ccsdk/healthcheck/setup.sh
@@ -0,0 +1,125 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+source ${WORKSPACE}/test/csit/scripts/ccsdk/script1.sh
+
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
+export NEXUS_DOCKER_REPO="nexus3.onap.org:10001"
+export NEXUS_USERNAME=docker
+export NEXUS_PASSWD=docker
+export DMAAP_TOPIC=AUTO
+export CCSDK_DOCKER_IMAGE_VERSION=0.3-STAGING-latest
+
+if [ "$MTU" == "" ]; then
+	  export MTU="1450"
+fi
+
+
+# Clone CCSDK repo to get docker-compose for CCSDK
+mkdir -p $WORKSPACE/archives/ccsdk
+cd $WORKSPACE/archives
+git clone -b master --single-branch http://gerrit.onap.org/r/ccsdk/distribution.git ccsdk
+cd $WORKSPACE/archives/ccsdk
+git pull
+unset http_proxy https_proxy
+cd $WORKSPACE/archives/ccsdk/src/main/yaml
+
+sed -i "s/DMAAP_TOPIC_ENV=.*/DMAAP_TOPIC_ENV="AUTO"/g" docker-compose.yml
+docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+
+docker pull $NEXUS_DOCKER_REPO/onap/ccsdk-odl-image:$CCSDK_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/ccsdk-odl-image:$CCSDK_DOCKER_IMAGE_VERSION onap/ccsdk-odl-image:0.3-STAGING-latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION onap/ccsdk-dgbuilder-image:0.3-STAGING-latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/ccsdk-odlsli-image:$CCSDK_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/ccsdk-odlsli-image:$CCSDK_DOCKER_IMAGE_VERSION onap/ccsdk-odlsli-image:0.3-STAGING-latest
+
+# start CCSDK containers with docker compose and configuration from docker-compose.yml
+curl -L https://github.com/docker/compose/releases/download/1.9.0/docker-compose-`uname -s`-`uname -m` > docker-compose
+chmod +x docker-compose
+./docker-compose up -d
+
+# WAIT 5 minutes maximum and test every 5 seconds if CCSDK is up using HealthCheck API
+TIME_OUT=500
+INTERVAL=30
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-ccsdk" -H "X-TransactionId: csit-ccsdk" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8383/restconf/operations/SLI-API:healthcheck ); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo CCSDK started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if CCSDK is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+#sleep 800
+
+TIME_OUT=1500
+INTERVAL=60
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+
+docker exec ccsdk_odlsli_container rm -f /opt/opendaylight/current/etc/host.key
+response=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client system:start-level)
+docker exec ccsdk_odlsli_container rm -f /opt/opendaylight/current/etc/host.key
+num_bundles=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+
+  if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+    echo CCSDK karaf started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if CCSDK is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+response=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client system:start-level)
+num_bundles=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+
+  if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+    num_bundles=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+    num_failed_bundles=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client bundle:list | grep Failure | wc -l)
+    failed_bundles=$(docker exec ccsdk_odlsli_container /opt/opendaylight/current/bin/client bundle:list | grep Failure)
+    echo There is/are $num_failed_bundles failed bundles out of $num_bundles installed bundles.
+  fi
+
+if [ "$num_failed_bundles" -ge 1 ]; then
+  echo "The following bundle(s) are in a failed state: "
+  echo "  $failed_bundles"
+fi
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
+
diff --git a/plans/ccsdk/healthcheck/teardown.sh b/plans/ccsdk/healthcheck/teardown.sh
new file mode 100644
index 00000000..56820786
--- /dev/null
+++ b/plans/ccsdk/healthcheck/teardown.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh ccsdk_db_container
+kill-instance.sh ccsdk_dgbuilder_container
+kill-instance.sh ccsdk_odlsli_container
+
+# $WORKSPACE/archives/appc deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/ccsdk/healthcheck/testplan.txt b/plans/ccsdk/healthcheck/testplan.txt
new file mode 100644
index 00000000..affe635b
--- /dev/null
+++ b/plans/ccsdk/healthcheck/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+ccsdk/healthcheck
+
diff --git a/plans/clamp/APIs/setup.sh b/plans/clamp/APIs/setup.sh
new file mode 100755
index 00000000..bb7a8144
--- /dev/null
+++ b/plans/clamp/APIs/setup.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+
+source ${WORKSPACE}/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh
+
+source ${WORKSPACE}/test/csit/scripts/clamp/start_clamp_containers.sh
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+#ROBOT_VARIABLES="-v TEST:${TEST}"
+
diff --git a/plans/clamp/APIs/teardown.sh b/plans/clamp/APIs/teardown.sh
new file mode 100755
index 00000000..07067e60
--- /dev/null
+++ b/plans/clamp/APIs/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+source ${WORKSPACE}/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh
+
+# $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/clamp/APIs/testplan.txt b/plans/clamp/APIs/testplan.txt
new file mode 100644
index 00000000..9d328f52
--- /dev/null
+++ b/plans/clamp/APIs/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+clamp/APIs
+
diff --git a/plans/clamp/UIs/setup.sh b/plans/clamp/UIs/setup.sh
new file mode 100755
index 00000000..bb7a8144
--- /dev/null
+++ b/plans/clamp/UIs/setup.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+
+source ${WORKSPACE}/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh
+
+source ${WORKSPACE}/test/csit/scripts/clamp/start_clamp_containers.sh
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+#ROBOT_VARIABLES="-v TEST:${TEST}"
+
diff --git a/plans/clamp/UIs/teardown.sh b/plans/clamp/UIs/teardown.sh
new file mode 100755
index 00000000..07067e60
--- /dev/null
+++ b/plans/clamp/UIs/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+source ${WORKSPACE}/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh
+
+# $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/clamp/UIs/testplan.txt b/plans/clamp/UIs/testplan.txt
new file mode 100644
index 00000000..9ec5b953
--- /dev/null
+++ b/plans/clamp/UIs/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+clamp/UIs
+
diff --git a/plans/cli/sanity-check/setup.sh b/plans/cli/sanity-check/setup.sh
new file mode 100644
index 00000000..7945ff56
--- /dev/null
+++ b/plans/cli/sanity-check/setup.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+#Need some time for the initialization of MSB services
+sleep 60
+
+# Start cli
+docker run -d --name cli -e CLI_MODE=daemon nexus3.onap.org:10001/onap/cli:v1.1.0
+
+# Wait for cli initialization
+echo Wait for CLI initialization
+for i in {1..40}; do
+    sleep 1
+done
+
+CLI_IP=`get-instance-ip.sh cli`
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v CLI_IP:${CLI_IP} -v MSB_IAG_IP:${MSB_IAG_IP}"
diff --git a/plans/cli/sanity-check/teardown.sh b/plans/cli/sanity-check/teardown.sh
new file mode 100644
index 00000000..2135d001
--- /dev/null
+++ b/plans/cli/sanity-check/teardown.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+kill-instance.sh cli msb_consul msb_discovery msb_internal_apigateway
diff --git a/plans/cli/sanity-check/testplan.txt b/plans/cli/sanity-check/testplan.txt
new file mode 100644
index 00000000..477ddab1
--- /dev/null
+++ b/plans/cli/sanity-check/testplan.txt
@@ -0,0 +1,18 @@
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+cli/startup/startup_check.robot
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/docker-compose.yml b/plans/dcaegen2-collectors-hv-ves/testsuites/docker-compose.yml
new file mode 100644
index 00000000..2a928217
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/docker-compose.yml
@@ -0,0 +1,100 @@
+version: "3"
+
+networks:
+  ves-hv-default:
+    external:
+      name: $CONTAINERS_NETWORK
+
+services:
+  zookeeper:
+    image: wurstmeister/zookeeper
+    ports:
+      - "2181:2181"
+    networks:
+      - ves-hv-default
+
+  kafka:
+    image: wurstmeister/kafka
+    ports:
+      - "9092:9092"
+    environment:
+      KAFKA_ADVERTISED_HOST_NAME: "kafka"
+      KAFKA_AUTO_CREATE_TOPICS_ENABLE: 'true'
+      KAFKA_ZOOKEEPER_CONNECT: "zookeeper:2181"
+      KAFKA_ADVERTISED_LISTENERS: "PLAINTEXT://kafka:9092"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock
+    depends_on:
+      - zookeeper
+    networks:
+      - ves-hv-default
+
+  consul:
+    image: progrium/consul
+    ports:
+      - "8500:8500"
+    environment:
+      - CONSUL_BIND_INTERFACE=eth0
+    networks:
+      ves-hv-default:
+        aliases:
+           - consul
+    command: ["-server", "-bootstrap"]
+
+  ves-hv-collector:
+    image: ${DOCKER_REGISTRY_PREFIX}onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:latest
+    ports:
+      - "6060:6060"
+      - "6061:6061/tcp"
+    entrypoint: ["java", "-Dio.netty.leakDetection.level=paranoid", "-cp", "*:", "org.onap.dcae.collectors.veshv.main.MainKt"]
+    command: ["--listen-port", "6061",
+              "--config-url", "http://consul:8500/v1/kv/veshv-config",
+              "--key-store-password", "onaponap",
+              "--trust-store-password", "onaponap"]
+    healthcheck:
+      interval: 10s
+      timeout: 5s
+      retries: 2
+      test: "curl --request GET --fail --silent --show-error localhost:6060/health/ready && nc -vz localhost 6061"
+    depends_on:
+      - kafka
+    volumes:
+      - ./ssl/:/etc/ves-hv/
+    networks:
+      - ves-hv-default
+
+  unencrypted-ves-hv-collector:
+    image: ${DOCKER_REGISTRY_PREFIX}onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-main:latest
+    ports:
+      - "7060:6060"
+      - "7061:6061/tcp"
+    entrypoint: ["java", "-Dio.netty.leakDetection.level=paranoid", "-cp", "*:", "org.onap.dcae.collectors.veshv.main.MainKt"]
+    command: ["--listen-port", "6061","--config-url", "http://consul:8500/v1/kv/veshv-config", "--ssl-disable"]
+    healthcheck:
+      interval: 10s
+      timeout: 5s
+      retries: 2
+      test: "curl --request GET --fail --silent --show-error localhost:6060/health/ready && nc -vz localhost 6061"
+    depends_on:
+      - kafka
+    volumes:
+      - ./ssl/:/etc/ves-hv/
+    networks:
+      - ves-hv-default
+
+  dcae-app-simulator:
+    image: ${DOCKER_REGISTRY_PREFIX}onap/org.onap.dcaegen2.collectors.hv-ves.hv-collector-dcae-app-simulator:latest
+    ports:
+      - "6063:6063/tcp"
+    command: ["--listen-port", "6063", "--kafka-bootstrap-servers", "kafka:9092", "--kafka-topics", "ves_hvRanMeas"]
+    healthcheck:
+      interval: 10s
+      timeout: 5s
+      retries: 2
+      test: "curl --request GET --fail --silent --show-error localhost:6063/healthcheck"
+    depends_on:
+      - kafka
+    networks:
+      ves-hv-default:
+        aliases:
+           - dcae-app-simulator
\ No newline at end of file
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/setup.sh b/plans/dcaegen2-collectors-hv-ves/testsuites/setup.sh
new file mode 100755
index 00000000..6f72521a
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/setup.sh
@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+
+if [[ $# -eq 1 ]] && [[ $1 == "local-test-run" ]]; then
+  echo "Building locally - assuming all dependencies are installed"
+  export DOCKER_REGISTRY=""
+  export DOCKER_REGISTRY_PREFIX=""
+  export WORKSPACE=$(git rev-parse --show-toplevel)
+else
+  echo "Default run - install all dependencies"
+
+  pip uninstall -y docker-py
+  pip install docker
+
+  COMPOSE_VERSION=1.22.0
+  COMPOSE_LOCATION='/usr/local/bin/docker-compose'
+  sudo curl -L https://github.com/docker/compose/releases/download/${COMPOSE_VERSION}/docker-compose-$(uname -s)-$(uname -m) -o ${COMPOSE_LOCATION}
+  sudo chmod +x ${COMPOSE_LOCATION}
+
+  export DOCKER_REGISTRY="nexus3.onap.org:10001"
+  export DOCKER_REGISTRY_PREFIX="${DOCKER_REGISTRY}/"
+fi
+
+echo "Removing not used docker networks"
+docker network prune -f
+
+export CONTAINERS_NETWORK=ves-hv-default
+echo "Creating network for containers: ${CONTAINERS_NETWORK}"
+docker network create ${CONTAINERS_NETWORK}
+
+cd ssl
+./gen-certs.sh
+cd ..
+
+docker-compose up -d
+
+mkdir -p ${WORKSPACE}/archives/containers_logs
+
+export ROBOT_VARIABLES="--pythonpath ${WORKSPACE}/test/csit/tests/dcaegen2-collectors-hv-ves/testcases/libraries"
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/.gitignore b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/.gitignore
new file mode 100644
index 00000000..0729569c
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/.gitignore
@@ -0,0 +1,6 @@
+*.crt
+*.key
+*.srl
+*.csr
+*.pkcs12
+*.p12
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/Makefile-openssl b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/Makefile-openssl
new file mode 100644
index 00000000..a32d30dd
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/Makefile-openssl
@@ -0,0 +1,41 @@
+FILE=sample
+PASSWD=onaponap
+CA_PASSWD=onaponap
+SUBJ=/C=PL/ST=DL/L=Wroclaw/O=Nokia/OU=MANO
+CA=trust
+
+sign: $(FILE).crt
+
+clean:
+	rm -f *.crt *.key *.srl *.csr *.pkcs12
+
+generate-ca-certificate: $(CA).crt
+
+generate-private-key: $(FILE).key
+
+create-public-key: $(FILE).pub
+
+create-sign-request: $(FILE).csr
+
+create-key-store: $(FILE).ks.pkcs12
+
+create-trust-store: $(CA).crt
+	openssl pkcs12 -export -in $(CA).crt -CAfile $(CA).crt -out $(CA).pkcs12 -nokeys -noiter -nomaciter -passout pass:$(PASSWD)
+
+$(CA).crt:
+	openssl req -new -x509 -keyout $(CA).key -out $(CA).crt -days 365 -passout pass:$(CA_PASSWD) -subj "$(SUBJ)"
+
+$(FILE).key:
+	openssl genpkey -algorithm RSA -out $(FILE).key -pkeyopt rsa_keygen_bits:2048
+
+$(FILE).pub: $(FILE).key
+	openssl x509 -req -days 360 -in client.csr -CA $(CA).crt -CAkey $(CA).key -CAcreateserial -out client.crt
+
+$(FILE).csr: $(FILE).key
+	openssl req -new -sha256 -key $(FILE).key -out $(FILE).csr -subj "$(SUBJ)"
+
+$(FILE).crt: $(CA).crt $(FILE).csr
+	openssl x509 -req -days 360 -in $(FILE).csr -CA $(CA).crt -CAkey $(CA).key -out $(FILE).crt -CAcreateserial -passin pass:$(CA_PASSWD)
+
+$(FILE).ks.pkcs12: $(FILE).key $(FILE).crt $(CA).crt
+	openssl pkcs12 -export -in $(FILE).crt -inkey $(FILE).key -CAfile $(CA).crt -out $(FILE).ks.pkcs12 -noiter -nomaciter -passout pass:$(PASSWD)
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/README.md b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/README.md
new file mode 100644
index 00000000..c2819d24
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/README.md
@@ -0,0 +1,54 @@
+# Generating SSL certificates
+
+## Java keytool way (recommended)
+
+To generate:
+
+```shell
+./gen-certs.sh
+```
+
+To clean (remove generated files):
+
+```shell
+./gen-certs.sh clean
+```
+
+## OpenSSL way (currently might not work)
+
+> Add `-f Makefile-openssl` to each command
+
+Typical usage:
+
+```shell
+make FILE=client
+make FILE=server
+```
+
+or (to generate PKCS12 key and trust stores):
+
+```shell
+make create-key-store FILE=client
+make create-key-store FILE=server
+make create-trust-store
+```
+
+Will generate CA certificate and signed client and server certificates.
+
+More "low-level" usage:
+
+```shell
+make generate-ca-certificate
+make generate-private-key FILE=client 
+make sign FILE=client
+```
+
+# Connecting to a server
+
+First generate *client* and *server* certificates. Then start a server with it's cert and make ca.crt a trusted certification authority.
+
+After that you can:
+
+```shell
+./connect.sh client localhost:8600 < file_with_a_data_to_be_sent.dat
+```
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/gen-certs.sh b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/gen-certs.sh
new file mode 100755
index 00000000..34572f7a
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/ssl/gen-certs.sh
@@ -0,0 +1,59 @@
+#!/usr/bin/env bash
+
+set -eu -o pipefail -o xtrace
+
+STORE_PASS=onaponap
+CN_PREFIX=dcaegen2-hvves
+DNAME_PREFIX="C=PL,ST=DL,L=Wroclaw,O=Nokia,OU=MANO,CN=${CN_PREFIX}"
+
+store_opts="-storetype PKCS12 -storepass ${STORE_PASS} -noprompt"
+
+function gen_key() {
+  local key_name="$1"
+  local ca="$2"
+  local keystore="-keystore ${key_name}.p12 ${store_opts}"
+  keytool -genkey -alias ${key_name} \
+      ${keystore} \
+      -keyalg RSA \
+      -validity 730 \
+      -keysize 2048 \
+      -dname "${DNAME_PREFIX}-${key_name}"
+  keytool -import -trustcacerts -alias ${ca} -file ${ca}.crt ${keystore}
+
+  keytool -certreq -alias ${key_name} -keyalg RSA ${keystore} | \
+      keytool -alias ${ca} -gencert -ext "san=dns:${CN_PREFIX}-${ca}" ${store_opts} -keystore ${ca}.p12 | \
+      keytool -alias ${key_name} -importcert ${keystore}
+}
+
+
+function gen_ca() {
+  local ca="$1"
+  keytool -genkeypair ${store_opts} -alias ${ca} -dname "${DNAME_PREFIX}-${ca}" -keystore ${ca}.p12
+  keytool -export -alias ${ca} -file ${ca}.crt ${store_opts} -keystore ${ca}.p12
+}
+
+function gen_truststore() {
+  local name="$1"
+  local trusted_ca="$2"
+  keytool -import -trustcacerts -alias ca -file ${trusted_ca}.crt ${store_opts} -keystore ${name}.p12
+}
+
+function clean() {
+  rm -f *.crt *.p12
+}
+
+if [[ $# -eq 0 ]]; then
+  gen_ca ca
+  gen_ca untrustedca
+  gen_truststore trust ca
+  gen_truststore untrustedtrust untrustedca
+  gen_key client ca
+  gen_key server ca
+  gen_key untrustedclient untrustedca
+elif [[ $1 == "clean" ]]; then
+  clean
+else
+  echo "usage: $0 [clean]"
+  exit 1
+fi
+
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/teardown.sh b/plans/dcaegen2-collectors-hv-ves/testsuites/teardown.sh
new file mode 100755
index 00000000..fe922ed0
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/teardown.sh
@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+
+cd ssl
+./gen-certs.sh clean
+cd ..
+
+COMPOSE_LOGS_FILE=${WORKSPACE}/archives/containers_logs/docker-compose.log
+docker-compose logs > ${COMPOSE_LOGS_FILE}
+docker-compose down
+docker-compose rm -f
+
+docker network rm ${CONTAINERS_NETWORK}
+
+if grep "LEAK:" ${COMPOSE_LOGS_FILE}; then
+    echo "WARNING: Memory leak detected in docker-compose logs."
+fi
diff --git a/plans/dcaegen2-collectors-hv-ves/testsuites/testplan.txt b/plans/dcaegen2-collectors-hv-ves/testsuites/testplan.txt
new file mode 100644
index 00000000..e9a7f636
--- /dev/null
+++ b/plans/dcaegen2-collectors-hv-ves/testsuites/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+dcaegen2-collectors-hv-ves/testcases
+
diff --git a/plans/dcaegen2/prh-testsuites/setup.sh b/plans/dcaegen2/prh-testsuites/setup.sh
new file mode 100644
index 00000000..52167bf5
--- /dev/null
+++ b/plans/dcaegen2/prh-testsuites/setup.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+source ${SCRIPTS}/common_functions.sh
+
+export PRH_SERVICE="prh"
+export DMAAP_SIMULATOR="dmaap_simulator"
+export AAI_SIMULATOR="aai_simulator"
+
+cd ${WORKSPACE}/test/csit/tests/dcaegen2/prh-testcases/resources/
+
+pip uninstall -y docker-py
+pip uninstall -y docker
+pip install -U docker
+docker-compose up -d --build
+
+PRH_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' ${PRH_SERVICE})
+DMAAP_SIMULATOR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' ${DMAAP_SIMULATOR})
+AAI_SIMULATOR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' ${AAI_SIMULATOR})
+
+bypass_ip_adress ${PRH_IP}
+bypass_ip_adress ${DMAAP_SIMULATOR_IP}
+bypass_ip_adress ${AAI_SIMULATOR_IP}
+
+echo PRH_IP=${PRH_IP}
+echo DMAAP_SIMULATOR_IP=${DMAAP_SIMULATOR_IP}
+echo AAI_SIMULATOR_IP=${AAI_SIMULATOR_IP}
+
+# Wait for initialization of PRH services
+for i in {1..10}; do
+    curl -sS -m 1 localhost:8100/heartbeat && break
+    echo sleep ${i}
+    sleep ${i}
+done
+
+# #Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v DMAAP_SIMULATOR:${DMAAP_SIMULATOR_IP}:2222 -v AAI_SIMULATOR:${AAI_SIMULATOR_IP}:3333 -v PRH:${PRH_IP}:8100"
diff --git a/plans/dcaegen2/prh-testsuites/teardown.sh b/plans/dcaegen2/prh-testsuites/teardown.sh
new file mode 100644
index 00000000..bd1e5ba0
--- /dev/null
+++ b/plans/dcaegen2/prh-testsuites/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2017 Nokia, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh prh
+kill-instance.sh dmaap_simulator
+kill-instance.sh aai_simulator
diff --git a/plans/dcaegen2/prh-testsuites/testplan.txt b/plans/dcaegen2/prh-testsuites/testplan.txt
new file mode 100644
index 00000000..9007a64b
--- /dev/null
+++ b/plans/dcaegen2/prh-testsuites/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+dcaegen2/prh-testcases
diff --git a/plans/dcaegen2/testsuites/setup.sh b/plans/dcaegen2/testsuites/setup.sh
new file mode 100755
index 00000000..8ee1309b
--- /dev/null
+++ b/plans/dcaegen2/testsuites/setup.sh
@@ -0,0 +1,39 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+#Make sure python-uuid is installed
+
+
+#get current host IP addres
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+
+VESC_IMAGE=nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.2-latest
+echo VESC_IMAGE=${VESC_IMAGE}
+
+# Start DCAE VES Collector
+docker run -d -p 8080:8080/tcp -p 8443:8443/tcp -P --name vesc -e DMAAPHOST=${HOST_IP} ${VESC_IMAGE}
+
+VESC_IP=`get-instance-ip.sh vesc`
+export VESC_IP=${VESC_IP}
+export HOST_IP=${HOST_IP}
+
+export ROBOT_VARIABLES="--pythonpath ${WORKSPACE}/test/csit/tests/dcaegen2/testcases/resources"
+
+pip install jsonschema uuid
+# Wait container ready
+sleep 5
+
diff --git a/plans/dcaegen2/testsuites/teardown.sh b/plans/dcaegen2/testsuites/teardown.sh
new file mode 100755
index 00000000..2dc14870
--- /dev/null
+++ b/plans/dcaegen2/testsuites/teardown.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh vesc
\ No newline at end of file
diff --git a/plans/dcaegen2/testsuites/testplan.txt b/plans/dcaegen2/testsuites/testplan.txt
new file mode 100755
index 00000000..fbf08839
--- /dev/null
+++ b/plans/dcaegen2/testsuites/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+dcaegen2/testcases
diff --git a/plans/dmaap-buscontroller/mock_downstream/setup.sh b/plans/dmaap-buscontroller/mock_downstream/setup.sh
new file mode 100755
index 00000000..d5c77b0b
--- /dev/null
+++ b/plans/dmaap-buscontroller/mock_downstream/setup.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+
+
+# Place the scripts in run order:
+source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/start-mock.sh
+start_mock "aaf" 
+AAF_IP=${IP}
+start_mock "mrc" 3904
+MRC_IP=${IP} 
+start_mock "drps" 
+DRPS_IP=${IP}
+
+source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-launch.sh 
+dmaapbc_launch $AAF_IP $MRC_IP $DRPS_IP
+DMAAPBC_IP=${IP}
+
+
+echo "AAF_IP=$AAF_IP MRC_IP=$MRC_IP DRPS_IP=$DRPS_IP DMAAPBC_IP=$DMAAPBC_IP"
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v AAF_IP:${AAF_IP} -v MRC_IP:${MRC_IP} -v DRPS_IP:${DRPS_IP} -v DMAAPBC_IP:${DMAAPBC_IP}"
+
+set -x
+${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-init.sh ${DMAAPBC_IP} ${DRPS_IP} ${MRC_IP}
+set +x
diff --git a/plans/dmaap-buscontroller/mock_downstream/teardown.sh b/plans/dmaap-buscontroller/mock_downstream/teardown.sh
new file mode 100644
index 00000000..1b041a42
--- /dev/null
+++ b/plans/dmaap-buscontroller/mock_downstream/teardown.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+kill-instance.sh aaf-mock
+kill-instance.sh drps-mock
+kill-instance.sh mrc-mock
+kill-instance.sh dmaapbc
+
diff --git a/plans/dmaap-buscontroller/mock_downstream/testplan.txt b/plans/dmaap-buscontroller/mock_downstream/testplan.txt
new file mode 100644
index 00000000..39a2f449
--- /dev/null
+++ b/plans/dmaap-buscontroller/mock_downstream/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+dmaap-buscontroller/suite1
+
diff --git a/plans/dmaap-buscontroller/ssl/setup.sh b/plans/dmaap-buscontroller/ssl/setup.sh
new file mode 100755
index 00000000..e40f62de
--- /dev/null
+++ b/plans/dmaap-buscontroller/ssl/setup.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+
+
+# Place the scripts in run order:
+source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/start-mock.sh
+start_mock "aaf" 
+AAF_IP=${IP}
+start_mock "mrc" 3905
+MRC_IP=${IP} 
+start_mock "drps" 8443
+DRPS_IP=${IP}
+
+source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-launch.sh 
+dmaapbc_launch $AAF_IP $MRC_IP $DRPS_IP
+DMAAPBC_IP=${IP}
+
+
+echo "AAF_IP=$AAF_IP MRC_IP=$MRC_IP DRPS_IP=$DRPS_IP DMAAPBC_IP=$DMAAPBC_IP"
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v AAF_IP:${AAF_IP} -v MRC_IP:${MRC_IP} -v DRPS_IP:${DRPS_IP} -v DMAAPBC_IP:${DMAAPBC_IP}"
+
+set -x
+${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-init.sh ${DMAAPBC_IP} ${DRPS_IP} ${MRC_IP} https
+set +x
diff --git a/plans/dmaap-buscontroller/ssl/teardown.sh b/plans/dmaap-buscontroller/ssl/teardown.sh
new file mode 100644
index 00000000..1b041a42
--- /dev/null
+++ b/plans/dmaap-buscontroller/ssl/teardown.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+kill-instance.sh aaf-mock
+kill-instance.sh drps-mock
+kill-instance.sh mrc-mock
+kill-instance.sh dmaapbc
+
diff --git a/plans/dmaap-buscontroller/ssl/testplan.txt b/plans/dmaap-buscontroller/ssl/testplan.txt
new file mode 100644
index 00000000..e106e7b6
--- /dev/null
+++ b/plans/dmaap-buscontroller/ssl/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+dmaap-buscontroller/ssl_suite
+
diff --git a/plans/dmaap-buscontroller/with_dr/setup.sh b/plans/dmaap-buscontroller/with_dr/setup.sh
new file mode 100755
index 00000000..7cefa727
--- /dev/null
+++ b/plans/dmaap-buscontroller/with_dr/setup.sh
@@ -0,0 +1,57 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+
+source ${SCRIPTS}/common_functions.sh
+
+
+if [ "$USE_EXISTING_DMAAP" = "Y" ]
+then
+	ROBOT_VARIABLES="-v AAF_IP:0.0.0 -v MRC_IP:0.0.0.0 -v DRPS_IP:172.17.0.3 -v DMAAPBC_IP:172.17.0.4"
+else
+
+	# Place the scripts in run order:
+	source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dr-launch.sh
+	dmaap_dr_launch
+	DRPS_IP=${IP}
+
+	#source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/start-mock.sh
+	#start_mock "aaf" 
+	#AAF_IP=${IP}
+	AAF_IP=0.0.0.0
+	#start_mock "drps" 
+	#DRPS_IP=${IP}
+	MRC_IP=0.0.0.0
+
+	source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-launch.sh 
+	dmaapbc_launch $AAF_IP $MRC_IP $DRPS_IP
+	DMAAPBC_IP=${IP}
+
+
+	echo "AAF_IP=$AAF_IP MRC_IP=$MRC_IP DRPS_IP=$DRPS_IP DMAAPBC_IP=$DMAAPBC_IP"
+
+	# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+	ROBOT_VARIABLES="-v AAF_IP:${AAF_IP} -v MRC_IP:${MRC_IP} -v DRPS_IP:${DRPS_IP} -v DMAAPBC_IP:${DMAAPBC_IP}"
+	set -x
+	${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-init.sh ${DMAAPBC_IP} ${DRPS_IP} ${MRC_IP} https
+	set +x
+fi
+
diff --git a/plans/dmaap-buscontroller/with_dr/teardown.sh b/plans/dmaap-buscontroller/with_dr/teardown.sh
new file mode 100755
index 00000000..23ae60a1
--- /dev/null
+++ b/plans/dmaap-buscontroller/with_dr/teardown.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+if [ "$KEEP_DMAAP" != "Y" ]
+then
+kill-instance.sh dmaapbc
+cd $WORKSPACE/archives/dmaapdr/datarouter/docker-compose/
+docker-compose down -v
+fi
diff --git a/plans/dmaap-buscontroller/with_dr/testplan.txt b/plans/dmaap-buscontroller/with_dr/testplan.txt
new file mode 100755
index 00000000..04c6838d
--- /dev/null
+++ b/plans/dmaap-buscontroller/with_dr/testplan.txt
@@ -0,0 +1,2 @@
+# Place the suites in run order.
+dmaap-buscontroller/with_dr
diff --git a/plans/dmaap-buscontroller/with_mr/setup.sh b/plans/dmaap-buscontroller/with_mr/setup.sh
new file mode 100755
index 00000000..bcd19b5a
--- /dev/null
+++ b/plans/dmaap-buscontroller/with_mr/setup.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+
+if [ "$USE_EXISTING_DMAAP" = "Y" ]
+then
+	ROBOT_VARIABLES="-v AAF_IP:0.0.0 -v MRC_IP:172.18.0.3 -v DRPS_IP:0.0.0.0 -v DMAAPBC_IP:172.17.0.4"
+else
+
+	# Place the scripts in run order:
+	source ${WORKSPACE}/test/csit/scripts/dmaap-message-router/dmaap-mr-launch.sh
+	dmaap_mr_launch
+	MRC_IP=${IP}
+
+	source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/start-mock.sh
+	start_mock "aaf" 
+	AAF_IP=${IP}
+	#AAF_IP=0.0.0.0
+	#start_mock "drps" 
+	#DRPS_IP=${IP}
+	DRPS_IP=0.0.0.0
+
+	source ${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-launch.sh 
+	dmaapbc_launch $AAF_IP $MRC_IP $DRPS_IP
+	DMAAPBC_IP=${IP}
+
+
+	echo "AAF_IP=$AAF_IP MRC_IP=$MRC_IP DRPS_IP=$DRPS_IP DMAAPBC_IP=$DMAAPBC_IP"
+
+	# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+	ROBOT_VARIABLES="-v AAF_IP:${AAF_IP} -v MRC_IP:${MRC_IP} -v DRPS_IP:${DRPS_IP} -v DMAAPBC_IP:${DMAAPBC_IP}"
+	set -x
+	${WORKSPACE}/test/csit/scripts/dmaap-buscontroller/dmaapbc-init.sh ${DMAAPBC_IP} ${DRPS_IP} ${MRC_IP}
+	set +x
+fi
+
diff --git a/plans/dmaap-buscontroller/with_mr/teardown.sh b/plans/dmaap-buscontroller/with_mr/teardown.sh
new file mode 100644
index 00000000..3feebe07
--- /dev/null
+++ b/plans/dmaap-buscontroller/with_mr/teardown.sh
@@ -0,0 +1,30 @@
+#!/bin/bash
+# 
+# ============LICENSE_START=======================================================
+# org.onap.dmaap
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+# 
+#
+source ${WORKSPACE}/test/csit/scripts/dmaap-message-router/dmaap-mr-teardown.sh
+
+if [ "$KEEP_DMAAP" != "Y" ]
+then
+dmaap_mr_teardown
+kill-instance.sh dmaapbc
+kill-instance.sh aaf-mock
+fi
+
diff --git a/plans/dmaap-buscontroller/with_mr/testplan.txt b/plans/dmaap-buscontroller/with_mr/testplan.txt
new file mode 100644
index 00000000..4f4ff717
--- /dev/null
+++ b/plans/dmaap-buscontroller/with_mr/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+dmaap-buscontroller/single-mr-suite
diff --git a/plans/dmaap-datarouter/dr-suite/setup.sh b/plans/dmaap-datarouter/dr-suite/setup.sh
new file mode 100755
index 00000000..e5debfc2
--- /dev/null
+++ b/plans/dmaap-datarouter/dr-suite/setup.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+
+source ${SCRIPTS}/common_functions.sh
+
+# Clone DMaaP Data Router repo
+mkdir -p $WORKSPACE/archives/dmaapdr
+cd $WORKSPACE/archives/dmaapdr
+
+git clone --depth 1 https://gerrit.onap.org/r/dmaap/datarouter -b master
+cd datarouter
+git pull
+cd $WORKSPACE/archives/dmaapdr/datarouter/docker-compose/
+
+sed -i 's/10003/10001/g' docker-compose.yml
+# start DMaaP DR containers with docker compose and configuration from docker-compose.yml
+docker login -u docker -p docker nexus3.onap.org:10001
+docker-compose up -d
+
+# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb
+for i in {1..50}; do
+    if [ $(docker inspect --format '{{ .State.Running }}' datarouter-node) ] && \
+        [ $(docker inspect --format '{{ .State.Running }}' datarouter-prov) ] && \
+        [ $(docker inspect --format '{{ .State.Running }}' mariadb) ]
+    then
+        echo "DR Service Running"
+        break
+    else
+        echo sleep $i
+        sleep $i
+    fi
+done
+
+DR_PROV_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-prov)
+DR_NODE_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-node)
+DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
+
+echo DR_PROV_IP=${DR_PROV_IP}
+echo DR_NODE_IP=${DR_NODE_IP}
+echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
+
+docker exec -i datarouter-prov sh -c "curl -k  -X PUT https://$DR_PROV_IP:8443/internal/api/NODES?val=dmaap-dr-node\|$DR_GATEWAY_IP"
+docker exec -i datarouter-prov sh -c "curl -k  -X PUT https://$DR_PROV_IP:8443/internal/api/PROV_AUTH_ADDRESSES?val=dmaap-dr-prov\|$DR_GATEWAY_IP"
+
+#Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v DR_PROV_IP:${DR_PROV_IP} -v DR_NODE_IP:${DR_NODE_IP}"
diff --git a/plans/dmaap-datarouter/dr-suite/teardown.sh b/plans/dmaap-datarouter/dr-suite/teardown.sh
new file mode 100755
index 00000000..033a0015
--- /dev/null
+++ b/plans/dmaap-datarouter/dr-suite/teardown.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+
+cd $WORKSPACE/archives/dmaapdr/datarouter/docker-compose/
+docker-compose down -v
diff --git a/plans/dmaap-datarouter/dr-suite/testplan.txt b/plans/dmaap-datarouter/dr-suite/testplan.txt
new file mode 100755
index 00000000..8349a056
--- /dev/null
+++ b/plans/dmaap-datarouter/dr-suite/testplan.txt
@@ -0,0 +1,2 @@
+# Place the suites in run order.
+dmaap-datarouter/dr-suite
diff --git a/plans/dmaap/mrpubsub/setup.sh b/plans/dmaap/mrpubsub/setup.sh
new file mode 100755
index 00000000..0a1f9d35
--- /dev/null
+++ b/plans/dmaap/mrpubsub/setup.sh
@@ -0,0 +1,97 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# ONAP DMAAP MR 
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+# Place the scripts in run order:
+source ${SCRIPTS}/common_functions.sh
+
+# Clone DMaaP Message Router repo
+mkdir -p $WORKSPACE/archives/dmaapmr
+cd $WORKSPACE/archives/dmaapmr
+#unset http_proxy https_proxy
+git clone --depth 1 http://gerrit.onap.org/r/dmaap/messagerouter/messageservice -b master
+git pull
+cd $WORKSPACE/archives/dmaapmr/messageservice/src/main/resources/docker-compose
+cp $WORKSPACE/archives/dmaapmr/messageservice/bundleconfig-local/etc/appprops/MsgRtrApi.properties /var/tmp/
+
+
+# start DMaaP MR containers with docker compose and configuration from docker-compose.yml
+docker login -u docker -p docker nexus3.onap.org:10001
+docker-compose up -d
+
+# Wait for initialization of Docker contaienr for DMaaP MR, Kafka and Zookeeper
+for i in {1..50}; do
+	if [ $(docker inspect --format '{{ .State.Running }}' dockercompose_dmaap_1) ] && \
+		[ $(docker inspect --format '{{ .State.Running }}' dockercompose_zookeeper_1) ] && \
+		[ $(docker inspect --format '{{ .State.Running }}' dockercompose_dmaap_1) ] 
+	then
+		echo "DMaaP Service Running"	
+		break    		
+	else 
+		echo sleep $i		
+		sleep $i
+	fi
+done
+
+
+DMAAP_MR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' dockercompose_dmaap_1)
+KAFKA_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' dockercompose_kafka_1)
+ZOOKEEPER_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' dockercompose_zookeeper_1)
+
+echo DMAAP_MR_IP=${DMAAP_MR_IP}
+echo KAFKA_IP=${KAFKA_IP}
+echo ZOOKEEPER_IP=${ZOOKEEPER_IP}
+
+# Initial docker-compose up and down is for populating kafka and zookeeper IPs in /var/tmp/MsgRtrApi.properites
+docker-compose down 
+
+# Update kafkfa and zookeeper properties in MsgRtrApi.propeties which will be copied to DMaaP Container
+sed -i -e 's/<zookeeper_host>/'$ZOOKEEPER_IP'/' /var/tmp/MsgRtrApi.properties
+sed -i -e 's/<kafka_host>:<kafka_port>/'$KAFKA_IP':9092/' /var/tmp/MsgRtrApi.properties
+
+docker-compose build
+docker login -u docker -p docker nexus3.onap.org:10001
+docker-compose up -d 
+
+# Wait for initialization of Docker containers
+for i in {1..50}; do
+        if [ $(docker inspect --format '{{ .State.Running }}' dockercompose_dmaap_1) ] && \
+                [ $(docker inspect --format '{{ .State.Running }}' dockercompose_zookeeper_1) ] && \
+                [ $(docker inspect --format '{{ .State.Running }}' dockercompose_dmaap_1) ]
+        then
+                echo "DMaaP Service Running"
+                break
+        else
+                echo sleep $i
+                sleep $i
+        fi
+done
+
+# Wait for initialization of docker services
+for i in {1..50}; do
+    curl -sS -m 1 ${DMAAP_MR_IP}:3904/events/TestTopic && break 
+    echo sleep $i
+    sleep $i
+done
+
+#Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v DMAAP_MR_IP:${DMAAP_MR_IP}" 
diff --git a/plans/dmaap/mrpubsub/teardown.sh b/plans/dmaap/mrpubsub/teardown.sh
new file mode 100755
index 00000000..1b430324
--- /dev/null
+++ b/plans/dmaap/mrpubsub/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh dockercompose_dmaap_1 
+kill-instance.sh dockercompose_kafka_1 
+kill-instance.sh dockercompose_zookeeper_1
diff --git a/plans/dmaap/mrpubsub/testplan.txt b/plans/dmaap/mrpubsub/testplan.txt
new file mode 100644
index 00000000..6a98eb79
--- /dev/null
+++ b/plans/dmaap/mrpubsub/testplan.txt
@@ -0,0 +1,2 @@
+# Place the suites in run order.
+dmaap/mrpubsub
diff --git a/plans/externalapi-nbi/healthcheck/setup.sh b/plans/externalapi-nbi/healthcheck/setup.sh
new file mode 100644
index 00000000..50da7ad6
--- /dev/null
+++ b/plans/externalapi-nbi/healthcheck/setup.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+# ========================================================================
+# Copyright (c) 2018 Orange
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ========================================================================
+
+source ${WORKSPACE}/test/csit/scripts/externalapi-nbi/start_nbi_containers.sh
diff --git a/plans/externalapi-nbi/healthcheck/teardown.sh b/plans/externalapi-nbi/healthcheck/teardown.sh
new file mode 100644
index 00000000..83929723
--- /dev/null
+++ b/plans/externalapi-nbi/healthcheck/teardown.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+# ========================================================================
+# Copyright (c) 2018 Orange
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ========================================================================
+
+source ${WORKSPACE}/test/csit/scripts/externalapi-nbi/delete_nbi_containers.sh
\ No newline at end of file
diff --git a/plans/externalapi-nbi/healthcheck/testplan.txt b/plans/externalapi-nbi/healthcheck/testplan.txt
new file mode 100644
index 00000000..06622ae7
--- /dev/null
+++ b/plans/externalapi-nbi/healthcheck/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+externalapi-nbi/healthcheck
diff --git a/plans/holmes-rule-management/sanity-check/setup.sh b/plans/holmes-rule-management/sanity-check/setup.sh
new file mode 100644
index 00000000..89688eea
--- /dev/null
+++ b/plans/holmes-rule-management/sanity-check/setup.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+
+# Download and start MySQL
+docker pull postgres:9.5
+docker run --name postgres-holmes -p 5432:5432 -e POSTGRES_USER=holmes -e POSTGRES_PASSWORD=holmespwd -d postgres:9.5 
+DB_IP=`get-instance-ip.sh postgres-holmes`
+echo DB_IP=${DB_IP}
+
+#login to the onap nexus docker repo
+docker login -u docker -p docker nexus3.onap.org:10001
+
+# Start MSB
+docker run -d -p 8500:8500 --name msb_consul consul:0.9.3
+CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo CONSUL_IP=${CONSUL_IP}
+docker run -d -p 10081:10081 -e CONSUL_IP=$CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$CONSUL_IP -e SDCLIENT_IP=$DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IP=${MSB_IP}
+
+# Start rulemgt
+source ${SCRIPTS}/holmes/rule-management/startup.sh i-rulemgt ${DB_IP} ${MSB_IP} 1
+RULEMGT_IP=`get-instance-ip.sh i-rulemgt`
+echo RULEMGT_IP=${RULEMGT_IP}
+
+# Wait for initialization
+for i in {1..20}; do
+    curl -sS -m 1 ${RULEMGT_IP}:9101 && curl -sS -m 1 ${MSB_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Start engine-d
+source ${SCRIPTS}/holmes/engine-management/startup.sh i-engine-d ${DB_IP} ${MSB_IP} 1
+ENGINE_D_IP=`get-instance-ip.sh i-engine-d`
+echo ENGINE_D_IP=${ENGINE_D_IP}
+
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${ENGINE_D_IP}:9102 && break
+    echo sleep $i
+    sleep $i
+done
+
+echo sleep 30s for service registration
+sleep 30
+
+docker logs i-rulemgt
+docker logs i-engine-d
+ 
+#Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IP:${MSB_IP} -v RULEMGT_IP:${RULEMGT_IP} -v ENGINE_D_IP:${ENGINE_D_IP}"
+
diff --git a/plans/holmes-rule-management/sanity-check/teardown.sh b/plans/holmes-rule-management/sanity-check/teardown.sh
new file mode 100644
index 00000000..77652271
--- /dev/null
+++ b/plans/holmes-rule-management/sanity-check/teardown.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+#kill-instance.sh i-rulemgt
+#kill-instance.sh i-engine-d
+#kill-instance.sh msb_internal_apigateway
+#kill-instance.sh msb_discovery
+#kill-instance.sh msb_consul
+#kill-instance.sh mysql-holmes
+
+
diff --git a/plans/holmes-rule-management/sanity-check/testplan.txt b/plans/holmes-rule-management/sanity-check/testplan.txt
new file mode 100644
index 00000000..e699512d
--- /dev/null
+++ b/plans/holmes-rule-management/sanity-check/testplan.txt
@@ -0,0 +1,5 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+
+holmes/testcase/EngineMgt
+holmes/testcase/RuleMgt
diff --git a/plans/integration/functionality1/setup.sh b/plans/integration/functionality1/setup.sh
new file mode 100755
index 00000000..c18f6220
--- /dev/null
+++ b/plans/integration/functionality1/setup.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+source ${WORKSPACE}/test/csit/scripts/integration/script1.sh
+
+docker run --name i-mock -d jamesdbloom/mockserver
+MOCK_IP=`get-instance-ip.sh i-mock`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${MOCK_IP}:1080 && break
+    echo sleep $i
+    sleep $i
+done
+
+${WORKSPACE}/test/csit/scripts/integration/mock-hello.sh ${MOCK_IP}
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MOCK_IP:${MOCK_IP}"
+
diff --git a/plans/integration/functionality1/teardown.sh b/plans/integration/functionality1/teardown.sh
new file mode 100755
index 00000000..acf2d097
--- /dev/null
+++ b/plans/integration/functionality1/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh i-mock
+
+
diff --git a/plans/integration/functionality1/testplan.txt b/plans/integration/functionality1/testplan.txt
new file mode 100644
index 00000000..9221b475
--- /dev/null
+++ b/plans/integration/functionality1/testplan.txt
@@ -0,0 +1,5 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+# Temporary change to trigger verify job.
+integration/suite1
+integration/suite2
diff --git a/plans/integration/vCPE/setup.sh b/plans/integration/vCPE/setup.sh
new file mode 100755
index 00000000..1b9cc343
--- /dev/null
+++ b/plans/integration/vCPE/setup.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES=""
+
diff --git a/plans/integration/vCPE/teardown.sh b/plans/integration/vCPE/teardown.sh
new file mode 100755
index 00000000..8beb6e1f
--- /dev/null
+++ b/plans/integration/vCPE/teardown.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+
diff --git a/plans/integration/vCPE/testplan.txt b/plans/integration/vCPE/testplan.txt
new file mode 100644
index 00000000..2b3d4ad5
--- /dev/null
+++ b/plans/integration/vCPE/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+integration/vCPE
diff --git a/plans/modeling-toscaparsers-javatoscachecker/APIs/setup.sh b/plans/modeling-toscaparsers-javatoscachecker/APIs/setup.sh
new file mode 100644
index 00000000..03d07def
--- /dev/null
+++ b/plans/modeling-toscaparsers-javatoscachecker/APIs/setup.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2017 AT&T 
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+
+source ${WORKSPACE}/test/csit/scripts/modeling-toscaparsers-javatoscachecker/setup_containers.sh
+
diff --git a/plans/modeling-toscaparsers-javatoscachecker/APIs/teardown.sh b/plans/modeling-toscaparsers-javatoscachecker/APIs/teardown.sh
new file mode 100644
index 00000000..1ecaad4d
--- /dev/null
+++ b/plans/modeling-toscaparsers-javatoscachecker/APIs/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+source ${WORKSPACE}/test/csit/scripts/modeling-toscaparsers-javatoscachecker/teardown_containers.sh
+
diff --git a/plans/modeling-toscaparsers-javatoscachecker/APIs/testplan.txt b/plans/modeling-toscaparsers-javatoscachecker/APIs/testplan.txt
new file mode 100644
index 00000000..f59237bd
--- /dev/null
+++ b/plans/modeling-toscaparsers-javatoscachecker/APIs/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+modeling-toscaparsers-javatoscachecker/APIs
diff --git a/plans/msb/iag-redirect-discovery/setup.sh b/plans/msb/iag-redirect-discovery/setup.sh
new file mode 100644
index 00000000..70614c5c
--- /dev/null
+++ b/plans/msb/iag-redirect-discovery/setup.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Start rest example service
+docker run -d -p 9090:9090 --name i-rest-example zhaohuabing/rest-example
+REST_EXAMPLE_IP=`get-instance-ip.sh i-rest-example`
+echo REST_EXAMPLE_IP=${REST_EXAMPLE_IP}
+
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+#Need some time for the initialization of MSB services
+sleep 60
+
+curl -X POST \
+  -H "Content-Type: application/json" \
+  -d '{"serviceName": "test", "version": "v1", "url": "/","protocol": "REST", "lb_policy":"round-robin","nodes": [ {"ip": "'${REST_EXAMPLE_IP}'","port": "9090"}]}' \
+  "http://${MSB_IAG_IP}:80/api/microservices/v1/services"
+
+# Pass any variables required by Robot  suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v MSB_DISCOVERY_IP:${MSB_DISCOVERY_IP} -v REST_EXAMPLE_IP:${REST_EXAMPLE_IP}"
\ No newline at end of file
diff --git a/plans/msb/iag-redirect-discovery/teardown.sh b/plans/msb/iag-redirect-discovery/teardown.sh
new file mode 100644
index 00000000..b7945673
--- /dev/null
+++ b/plans/msb/iag-redirect-discovery/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh msb_consul
+kill-instance.sh msb_discovery
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh i-rest-example
diff --git a/plans/msb/iag-redirect-discovery/testplan.txt b/plans/msb/iag-redirect-discovery/testplan.txt
new file mode 100644
index 00000000..54bb307b
--- /dev/null
+++ b/plans/msb/iag-redirect-discovery/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+msb/rest-service-discovery
+msb/rest-service-api-gateway
\ No newline at end of file
diff --git a/plans/msb/rest-service/setup.sh b/plans/msb/rest-service/setup.sh
new file mode 100644
index 00000000..8d344db8
--- /dev/null
+++ b/plans/msb/rest-service/setup.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Start rest example service
+docker run -d -p 9090:9090 --name i-rest-example zhaohuabing/rest-example
+REST_EXAMPLE_IP=`get-instance-ip.sh i-rest-example`
+echo REST_EXAMPLE_IP=${REST_EXAMPLE_IP}
+
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+#Need some time for the initialization of MSB services
+sleep 60
+
+curl -X POST \
+  -H "Content-Type: application/json" \
+  -d '{"serviceName": "test", "version": "v1", "url": "/","protocol": "REST", "lb_policy":"round-robin","nodes": [ {"ip": "'${REST_EXAMPLE_IP}'","port": "9090"}]}' \
+  "http://${MSB_DISCOVERY_IP}:10081/api/microservices/v1/services"
+
+# Pass any variables required by Robot  suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v MSB_DISCOVERY_IP:${MSB_DISCOVERY_IP} -v REST_EXAMPLE_IP:${REST_EXAMPLE_IP}"
\ No newline at end of file
diff --git a/plans/msb/rest-service/teardown.sh b/plans/msb/rest-service/teardown.sh
new file mode 100644
index 00000000..b7945673
--- /dev/null
+++ b/plans/msb/rest-service/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh msb_consul
+kill-instance.sh msb_discovery
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh i-rest-example
diff --git a/plans/msb/rest-service/testplan.txt b/plans/msb/rest-service/testplan.txt
new file mode 100644
index 00000000..54bb307b
--- /dev/null
+++ b/plans/msb/rest-service/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+msb/rest-service-discovery
+msb/rest-service-api-gateway
\ No newline at end of file
diff --git a/plans/msb/sanity-check/setup.sh b/plans/msb/sanity-check/setup.sh
new file mode 100644
index 00000000..e44f4371
--- /dev/null
+++ b/plans/msb/sanity-check/setup.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+#wait for container initalization
+sleep 30
+
+#Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP}"
diff --git a/plans/msb/sanity-check/teardown.sh b/plans/msb/sanity-check/teardown.sh
new file mode 100644
index 00000000..609eaf66
--- /dev/null
+++ b/plans/msb/sanity-check/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh msb_consul
+kill-instance.sh msb_discovery
+kill-instance.sh msb_internal_apigateway
\ No newline at end of file
diff --git a/plans/msb/sanity-check/testplan.txt b/plans/msb/sanity-check/testplan.txt
new file mode 100644
index 00000000..0ef75071
--- /dev/null
+++ b/plans/msb/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+msb/startup
diff --git a/plans/msb/tcp-service/setup.sh b/plans/msb/tcp-service/setup.sh
new file mode 100644
index 00000000..ea2bafdf
--- /dev/null
+++ b/plans/msb/tcp-service/setup.sh
@@ -0,0 +1,53 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Start Message Broker
+docker run -d -p 61616:61616 --name i-activemq webcenter/activemq 
+ 
+ACTIVEMQ_IP=`get-instance-ip.sh i-activemq`
+echo ACTIVEMQ_IP=${ACTIVEMQ_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+#wait for container initalization
+sleep 30
+
+curl -H "Content-Type: application/json" -X POST -d '{"serviceName": "ActiveMQ","protocol": "TCP","nodes": [{"ip": "'${ACTIVEMQ_IP}'","port": "61616"}]}' http://${MSB_DISCOVERY_IP}:10081/api/microservices/v1/services
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v MSB_DISCOVERY_IP:${MSB_DISCOVERY_IP} -v ACTIVEMQ_IP:${ACTIVEMQ_IP}"
\ No newline at end of file
diff --git a/plans/msb/tcp-service/teardown.sh b/plans/msb/tcp-service/teardown.sh
new file mode 100644
index 00000000..36ee889f
--- /dev/null
+++ b/plans/msb/tcp-service/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE, Inc. and others.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh msb_consul
+kill-instance.sh msb_discovery
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh i-activemq
diff --git a/plans/msb/tcp-service/testplan.txt b/plans/msb/tcp-service/testplan.txt
new file mode 100644
index 00000000..ba8f6f28
--- /dev/null
+++ b/plans/msb/tcp-service/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+msb/tcp-service-discovery
+msb/tcp-service-access
\ No newline at end of file
diff --git a/plans/multicloud-ocata/functionality1/setup.sh b/plans/multicloud-ocata/functionality1/setup.sh
new file mode 100644
index 00000000..3cba6813
--- /dev/null
+++ b/plans/multicloud-ocata/functionality1/setup.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright (c) 2017 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+pushd ${SCRIPTS}
+
+# start multicloud-ocata
+./run-instance.sh nexus3.onap.org:10001/onap/multicloud/openstack/openstack-ocata:latest multicloud-ocata
+SERVICE_IP=$(./get-instance-ip.sh multicloud-ocata)
+SERVICE_PORT=9006
+popd
+
+if [[ $no_proxy && $no_proxy != *$SERVICE_IP* ]]; then
+	export no_proxy+=$no_proxy,$SERVICE_IP
+fi
+
+for i in {1..50}; do
+    curl -sS ${SERVICE_IP}:${SERVICE_PORT} && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES+="-v SERVICE_IP:${SERVICE_IP} "
+ROBOT_VARIABLES+="-v SERVICE_PORT:${SERVICE_PORT} "
diff --git a/plans/multicloud-ocata/functionality1/teardown.sh b/plans/multicloud-ocata/functionality1/teardown.sh
new file mode 100644
index 00000000..6ecb74eb
--- /dev/null
+++ b/plans/multicloud-ocata/functionality1/teardown.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+#
+# Copyright (c) 2017 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh multicloud-ocata
diff --git a/plans/multicloud-ocata/functionality1/testplan.txt b/plans/multicloud-ocata/functionality1/testplan.txt
new file mode 100644
index 00000000..fcd795da
--- /dev/null
+++ b/plans/multicloud-ocata/functionality1/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud-ocata/provision/sanity_test_multicloud.robot
diff --git a/plans/multicloud-ocata/hpa-discovery/setup.sh b/plans/multicloud-ocata/hpa-discovery/setup.sh
new file mode 100644
index 00000000..d17bec12
--- /dev/null
+++ b/plans/multicloud-ocata/hpa-discovery/setup.sh
@@ -0,0 +1,60 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation, Inc
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+cd ${SCRIPTS}
+
+source common_functions.sh
+
+generic_sim_path=${WORKSPACE}/test/csit/scripts/multicloud-ocata/generic_sim
+multicloud_provision_path=${WORKSPACE}/test/csit/tests/multicloud-ocata/provision
+# start generic simulator for openstack mock and AAI mock
+if [[ -z $(docker images -q generic_sim) ]]; then
+    pushd $generic_sim_path
+    docker build -t generic_sim .
+    popd
+fi
+
+function start_simulator ()
+{
+    local service_name=$1
+    local service_port=$2
+
+    ./run-instance.sh generic_sim $service_name "-v ${multicloud_provision_path}/${service_name}/:/tmp/generic_sim/ -v ${generic_sim_path}/${service_name}/:/etc/generic_sim/ -p $service_port:8080"
+    wait_for_service_init localhost:$service_port
+    bypass_ip_adress $service_name
+}
+
+start_simulator nova 8774
+start_simulator glance 9292
+start_simulator cinder 8776
+start_simulator keystone 5000
+start_simulator aai 8443
+
+# start multicloud-ocata
+./run-instance.sh nexus3.onap.org:10001/onap/multicloud/openstack/openstack-ocata multicloud-ocata "-t -e AAI_SERVICE_URL=http://aai:8080/aai -e no_proxy=$no_proxy -p 9006:9006"
+SERVICE_IP=$(./get-instance-ip.sh multicloud-ocata)
+SERVICE_PORT=9006
+
+docker network create hpa-net
+for container in aai keystone glance cinder nova multicloud-ocata; do
+    docker network connect hpa-net $container
+done
+
+bypass_ip_adress $SERVICE_IP
+wait_for_service_init ${SERVICE_IP}:${SERVICE_PORT}
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES+="-v SERVICE_IP:${SERVICE_IP} "
+ROBOT_VARIABLES+="-v SERVICE_PORT:${SERVICE_PORT} "
diff --git a/plans/multicloud-ocata/hpa-discovery/teardown.sh b/plans/multicloud-ocata/hpa-discovery/teardown.sh
new file mode 100644
index 00000000..b80f2e45
--- /dev/null
+++ b/plans/multicloud-ocata/hpa-discovery/teardown.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation, Inc
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+for container in aai keystone cinder glance nova multicloud-ocata; do
+    kill-instance.sh $container
+done
+docker network rm hpa-net
diff --git a/plans/multicloud-ocata/hpa-discovery/testplan.txt b/plans/multicloud-ocata/hpa-discovery/testplan.txt
new file mode 100644
index 00000000..9394379e
--- /dev/null
+++ b/plans/multicloud-ocata/hpa-discovery/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud-ocata/provision/hpa_multicloud.robot
diff --git a/plans/multicloud-pike/functionality1/setup.sh b/plans/multicloud-pike/functionality1/setup.sh
new file mode 100644
index 00000000..57e81812
--- /dev/null
+++ b/plans/multicloud-pike/functionality1/setup.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright (c) 2017-2018 Intel, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+pushd ${SCRIPTS}
+
+# start multicloud-pike
+./run-instance.sh nexus3.onap.org:10001/onap/multicloud/openstack-pike:latest multicloud-pike
+SERVICE_IP=$(./get-instance-ip.sh multicloud-pike)
+SERVICE_PORT=9007
+popd
+
+if [[ $no_proxy && $no_proxy != *$SERVICE_IP* ]]; then
+	export no_proxy+=$no_proxy,$SERVICE_IP
+fi
+
+for i in {1..50}; do
+    curl -sS ${SERVICE_IP}:${SERVICE_PORT} && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES+="-v SERVICE_IP:${SERVICE_IP} "
+ROBOT_VARIABLES+="-v SERVICE_PORT:${SERVICE_PORT} "
diff --git a/plans/multicloud-pike/functionality1/teardown.sh b/plans/multicloud-pike/functionality1/teardown.sh
new file mode 100644
index 00000000..13b70628
--- /dev/null
+++ b/plans/multicloud-pike/functionality1/teardown.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+#
+# Copyright (c) 2017-2018 Intel, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh multicloud-pike
diff --git a/plans/multicloud-pike/functionality1/testplan.txt b/plans/multicloud-pike/functionality1/testplan.txt
new file mode 100644
index 00000000..7f460164
--- /dev/null
+++ b/plans/multicloud-pike/functionality1/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud-pike/provision/sanity_test_multicloud.robot
diff --git a/plans/multicloud-pike/hpa-discovery/setup.sh b/plans/multicloud-pike/hpa-discovery/setup.sh
new file mode 100644
index 00000000..cbcc302e
--- /dev/null
+++ b/plans/multicloud-pike/hpa-discovery/setup.sh
@@ -0,0 +1,60 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation, Inc
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+cd ${SCRIPTS}
+
+source common_functions.sh
+
+generic_sim_path=${WORKSPACE}/test/csit/scripts/multicloud-pike/generic_sim
+multicloud_provision_path=${WORKSPACE}/test/csit/tests/multicloud-pike/provision
+# start generic simulator for openstack mock and AAI mock
+if [[ -z $(docker images -q generic_sim) ]]; then
+    pushd $generic_sim_path
+    docker build -t generic_sim .
+    popd
+fi
+
+function start_simulator ()
+{
+    local service_name=$1
+    local service_port=$2
+
+    ./run-instance.sh generic_sim $service_name "-v ${multicloud_provision_path}/${service_name}/:/tmp/generic_sim/ -v ${generic_sim_path}/${service_name}/:/etc/generic_sim/ -p $service_port:8080"
+    wait_for_service_init localhost:$service_port
+    bypass_ip_adress $service_name
+}
+
+start_simulator nova 8774
+start_simulator glance 9292
+start_simulator cinder 8776
+start_simulator keystone 5000
+start_simulator aai 8443
+
+# start multicloud-pike
+./run-instance.sh nexus3.onap.org:10001/onap/multicloud/openstack-pike multicloud-pike "-t -e AAI_SERVICE_URL=http://aai:8080/aai -e no_proxy=$no_proxy -p 9007:9007"
+SERVICE_IP=$(./get-instance-ip.sh multicloud-pike)
+SERVICE_PORT=9007
+
+docker network create hpa-net
+for container in aai keystone glance cinder nova multicloud-pike; do
+    docker network connect hpa-net $container
+done
+
+bypass_ip_adress $SERVICE_IP
+wait_for_service_init ${SERVICE_IP}:${SERVICE_PORT}
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES+="-v SERVICE_IP:${SERVICE_IP} "
+ROBOT_VARIABLES+="-v SERVICE_PORT:${SERVICE_PORT} "
diff --git a/plans/multicloud-pike/hpa-discovery/teardown.sh b/plans/multicloud-pike/hpa-discovery/teardown.sh
new file mode 100644
index 00000000..7d6c9535
--- /dev/null
+++ b/plans/multicloud-pike/hpa-discovery/teardown.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation, Inc
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+for container in aai keystone cinder glance nova multicloud-pike; do
+    kill-instance.sh $container
+done
+docker network rm hpa-net
diff --git a/plans/multicloud-pike/hpa-discovery/testplan.txt b/plans/multicloud-pike/hpa-discovery/testplan.txt
new file mode 100644
index 00000000..5914cbba
--- /dev/null
+++ b/plans/multicloud-pike/hpa-discovery/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud-pike/provision/hpa_multicloud.robot
diff --git a/plans/multicloud-vmware/functionality1/setup.sh b/plans/multicloud-vmware/functionality1/setup.sh
new file mode 100755
index 00000000..d71d5c42
--- /dev/null
+++ b/plans/multicloud-vmware/functionality1/setup.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+# start multicloud-vio
+docker run -d --name multicloud-vio nexus3.onap.org:10001/onap/multicloud/vio
+VIO_IP=`get-instance-ip.sh multicloud-vio`
+for i in {1..50}; do
+    curl -sS ${VIO_IP}:9004 && break
+    echo sleep $i
+    sleep $i
+done
+
+echo SCRIPTS
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v VIO_IP:${VIO_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/multicloud-vmware/functionality1/teardown.sh b/plans/multicloud-vmware/functionality1/teardown.sh
new file mode 100755
index 00000000..546e0126
--- /dev/null
+++ b/plans/multicloud-vmware/functionality1/teardown.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh multicloud-vio
diff --git a/plans/multicloud-vmware/functionality1/testplan.txt b/plans/multicloud-vmware/functionality1/testplan.txt
new file mode 100644
index 00000000..0a2ad45a
--- /dev/null
+++ b/plans/multicloud-vmware/functionality1/testplan.txt
@@ -0,0 +1,13 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud-vmware/provision/sanity_test_vio.robot
+multicloud-vmware/provision/sanity_test_tenant.robot
+multicloud-vmware/provision/sanity_test_image.robot
+multicloud-vmware/provision/sanity_test_neutron.robot
+multicloud-vmware/nova/sanity-flavor.robot
+multicloud-vmware/nova/sanity-host.robot
+multicloud-vmware/nova/sanity-server.robot
+multicloud-vmware/samples/sanity-sample.robot
+multicloud-vmware/hosts/sanity-host.robot
+multicloud-vmware/networks/sanity-network.robot
+multicloud-vmware/images/sanity-image.robot
diff --git a/plans/multicloud-windriver/functionality1/setup.sh b/plans/multicloud-windriver/functionality1/setup.sh
new file mode 100644
index 00000000..f2025c98
--- /dev/null
+++ b/plans/multicloud-windriver/functionality1/setup.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright (c) 2017 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+# start multicloud-windriver
+docker run -d --name multicloud-windriver nexus3.onap.org:10001/onap/multicloud/openstack-windriver
+SERVICE_IP=`get-instance-ip.sh multicloud-windriver`
+SERVICE_PORT=9005
+
+for i in {1..50}; do
+    curl -sS ${SERVICE_IP}:${SERVICE_PORT} && break
+    echo sleep $i
+    sleep $i
+done
+
+echo SCRIPTS
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES+="-v SERVICE_IP:${SERVICE_IP} "
+ROBOT_VARIABLES+="-v SERVICE_PORT:${SERVICE_PORT} "
diff --git a/plans/multicloud-windriver/functionality1/teardown.sh b/plans/multicloud-windriver/functionality1/teardown.sh
new file mode 100644
index 00000000..10a6bc05
--- /dev/null
+++ b/plans/multicloud-windriver/functionality1/teardown.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+#
+# Copyright (c) 2017 Wind River Systems, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh multicloud-windriver
diff --git a/plans/multicloud-windriver/functionality1/testplan.txt b/plans/multicloud-windriver/functionality1/testplan.txt
new file mode 100644
index 00000000..e59320b1
--- /dev/null
+++ b/plans/multicloud-windriver/functionality1/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud-windriver/provision/sanity_test_multicloud.robot
diff --git a/plans/multicloud/functionality1/setup.sh b/plans/multicloud/functionality1/setup.sh
new file mode 100755
index 00000000..50118a54
--- /dev/null
+++ b/plans/multicloud/functionality1/setup.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+# start multivim-broker
+docker run -d --name multivim-vio nexus3.onap.org:10001/onap/multicloud/vio
+docker run -d --name multivim-broker --link multivim-vio -e MSB_ADDR=multivim-vio -e MSB_PORT=9004 nexus3.onap.org:10001/onap/multicloud/framework
+
+BROKER_IP=`get-instance-ip.sh multivim-broker`
+for i in {1..50}; do
+    curl -sS ${BROKER_IP}:9001 && break
+    echo sleep $i
+    sleep $i
+done
+
+echo SCRIPTS
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v BROKER_IP:${BROKER_IP}"
diff --git a/plans/multicloud/functionality1/teardown.sh b/plans/multicloud/functionality1/teardown.sh
new file mode 100755
index 00000000..a2ef0e35
--- /dev/null
+++ b/plans/multicloud/functionality1/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh multivim-vio
+kill-instance.sh multivim-broker
diff --git a/plans/multicloud/functionality1/testplan.txt b/plans/multicloud/functionality1/testplan.txt
new file mode 100644
index 00000000..f515c64d
--- /dev/null
+++ b/plans/multicloud/functionality1/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+multicloud/provision/sanity_test_multivim.robot
diff --git a/plans/music/music-distributed-kv-store-test-plan/setup.sh b/plans/music/music-distributed-kv-store-test-plan/setup.sh
new file mode 100644
index 00000000..88becf69
--- /dev/null
+++ b/plans/music/music-distributed-kv-store-test-plan/setup.sh
@@ -0,0 +1,60 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Not sure why this is needed.
+source ${SCRIPTS}/common_functions.sh
+
+# Initial Configuration.
+DATASTORE="consul"
+DATASTORE_IP="localhost"
+
+MOUNTPATH="/dkv_mount_path/configs/"
+DEFAULT_CONFIGS=$(pwd)/mountpath/default
+
+mkdir -p mountpath/default
+
+pushd mountpath/default
+cat << EOF > sampleConfig1.properties
+foo1=bar1
+hello1=world1
+key1=value1
+EOF
+cat << EOF > sampleConfig2.properties
+foo2=bar2
+hello2=world2
+key2=value2
+EOF
+popd
+
+docker login -u docker -p docker nexus3.onap.org:10001
+docker pull nexus3.onap.org:10001/onap/music/distributed-kv-store
+docker run -e DATASTORE=$DATASTORE -e DATASTORE_IP=$DATASTORE_IP -e MOUNTPATH=$MOUNTPATH -d \
+           --name dkv \
+           -v $DEFAULT_CONFIGS:/dkv_mount_path/configs/default \
+           -p 8200:8200 -p 8080:8080 nexus3.onap.org:10001/onap/music/distributed-kv-store
+
+
+echo "###### WAITING FOR DISTRIBUTED KV STORE CONTAINER TO COME UP"
+sleep 10
+
+#
+# add here all ROBOT_VARIABLES settings
+#
+echo "# music robot variables settings";
+ROBOT_VARIABLES="-v DKV_HOSTNAME:http://localhost -v DKV_PORT:8080"
+
+echo ${ROBOT_VARIABLES}
\ No newline at end of file
diff --git a/plans/music/music-distributed-kv-store-test-plan/teardown.sh b/plans/music/music-distributed-kv-store-test-plan/teardown.sh
new file mode 100644
index 00000000..0abf3a62
--- /dev/null
+++ b/plans/music/music-distributed-kv-store-test-plan/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2018 Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+rm -rf mountpath
+docker stop dkv
+docker rm dkv
+docker rmi nexus3.onap.org:10001/onap/music/distributed-kv-store
diff --git a/plans/music/music-distributed-kv-store-test-plan/testplan.txt b/plans/music/music-distributed-kv-store-test-plan/testplan.txt
new file mode 100644
index 00000000..ac37bc5a
--- /dev/null
+++ b/plans/music/music-distributed-kv-store-test-plan/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+music/music-distributed-kv-store-suite
\ No newline at end of file
diff --git a/plans/music/music-test-plan/setup.sh b/plans/music/music-test-plan/setup.sh
new file mode 100755
index 00000000..7775bc52
--- /dev/null
+++ b/plans/music/music-test-plan/setup.sh
@@ -0,0 +1,164 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+#
+# add here eventual scripts needed for music
+#
+echo "########## music scripts calling ##########";
+source ${WORKSPACE}/test/csit/scripts/music/music-scripts/music_script.sh
+
+#
+# add here all the configuration steps eventually needed to be carried out for music CSIT testing
+#
+echo "########## music configuration step ##########";
+CASS_IMG=nexus3.onap.org:10001/onap/music/cassandra_3_11:latest
+CASS_IMG_JOB=nexus3.onap.org:10001/onap/music/cassandra_job:latest
+TOMCAT_IMG=nexus3.onap.org:10001/library/tomcat:8.5
+ZK_IMG=nexus3.onap.org:10001/library/zookeeper:3.4
+BUSYBOX_IMG=nexus3.onap.org:10001/library/busybox:latest
+MUSIC_IMG=nexus3.onap.org:10001/onap/music/music:latest
+TT=10
+WORK_DIR=/tmp/music
+CASS_USERNAME=nelson24
+CASS_PASSWORD=winman123
+MUSIC_SOURCE_PROPERTIES=${WORKSPACE}/test/csit/scripts/music/music-properties
+MUSIC_PROPERTIES=/tmp/music/properties
+MUSIC_LOGS=/tmp/music/logs
+CQL_FILES=${WORKSPACE}/test/csit/scripts/music/cql
+MUSIC_TRIGGER_DIR=/tmp/triggers
+TRIGGER_JAR=musictrigger-0.1.0.jar
+TRIGGER_JAR_URL=https://nexus.onap.org/service/local/repositories/autorelease-72298/content/org/onap/music/musictrigger/0.1.0/musictrigger-0.1.0.jar
+
+mkdir -p ${MUSIC_PROPERTIES}
+mkdir -p ${MUSIC_LOGS}
+mkdir -p ${MUSIC_LOGS}/MUSIC
+mkdir -p /tmp/triggers
+
+# Get Trigger
+echo "########## Get Trigger Jar ##########"
+curl -o $MUSIC_TRIGGER_DIR/$TRIGGER_JAR $TRIGGER_JAR_URL
+
+cp ${MUSIC_SOURCE_PROPERTIES}/* ${WORK_DIR}/properties
+
+# Create Volume for mapping war file and tomcat
+echo "########## create music-vol ##########"
+docker volume create --name music-vol;
+
+# Create a network for all the containers to run in.
+echo "########## create music-net ##########"
+docker network create music-net;
+
+# Start Cassandra
+echo "########## Start Cassandra (music-db) ##########"
+docker run -d --name music-db --network music-net -p "7000:7000" -p "7001:7001" -p "7199:7199" -p "9042:9042" -p "9160:9160" \
+-v $MUSIC_TRIGGER_DIR/$TRIGGER_JAR:/etc/cassandra/triggers/$TRIGGER_JAR \
+${CASS_IMG};
+
+CASSA_IP=`docker inspect -f '{{ $network := index .NetworkSettings.Networks "music-net" }}{{ $network.IPAddress}}' music-db`
+echo "CASSANDRA_IP=${CASSA_IP}"
+${WORKSPACE}/test/csit/scripts/optf-has/has/wait_for_port.sh ${CASSA_IP} 9042
+
+# See if cassandra is up.
+echo "########## Running Test to see if Cassandra is up ##########"
+docker run --name music-casstest --network music-net \
+$BUSYBOX_IMG sh -c "until nc -z music-db 9042 && echo "success"; do echo 'No connection .. Sleeping for $TT seconds';sleep $TT; done;"
+
+# Check to see if Keyspaces are there. 
+docker exec music-db cqlsh -u cassandra -p cassandra -e "DESCRIBE keyspaces;"
+
+sleep 10;
+
+# Load data into Cassandra via Cassandra Job 
+echo "########## Running Cassandra Job (music-job) to load cql files ##########"
+docker run -d --name music-job --network music-net \
+-v $CQL_FILES/admin.cql:/cql/admin.cql \
+-v $CQL_FILES/admin_pw.cql:/cql/admin_pw.cql \
+-v $CQL_FILES/extra:/cql/extra \
+-e PORT=9042 \
+-e CASS_HOSTNAME=music-db \
+-e USERNAME=$CASS_USERNAME \
+-e PASSWORD=$CASS_PASSWORD \
+$CASS_IMG_JOB
+# Logs
+echo "########## Cassandra Job logs ##########"
+docker logs music-job
+
+# Start Music war
+echo "########## Start music-war ##########"
+docker run -d --name music-war -v music-vol:/app ${MUSIC_IMG};
+
+# Start Zookeeper
+echo "########## Start zookeeper (music-zk) ##########"
+docker run -d --name music-zk --network music-net -p "2181:2181" -p "2888:2888" -p "3888:3888" ${ZK_IMG};
+
+ZOO_IP=`docker inspect -f '{{ $network := index .NetworkSettings.Networks "music-net" }}{{ $network.IPAddress}}' music-zk`
+echo "ZOOKEEPER_IP=${ZOO_IP}"
+
+# Delay  between Cassandra/Zookeeper and Tomcat
+sleep 10;
+
+# Start Up tomcat - Needs to have properties,logs dir and war file volume mapped.
+echo "########## Start Tomcat (music-tomcat) ##########"
+docker run -d --name music-tomcat --network music-net -p "8080:8080" -v music-vol:/usr/local/tomcat/webapps -v ${WORK_DIR}/properties:/opt/app/music/etc:ro -v ${WORK_DIR}/logs:/opt/app/music/logs ${TOMCAT_IMG};
+
+# Connect tomcat to host bridge network so that its port can be seen. 
+echo "########## Create Bridge for Tomcat ##########"
+docker network connect bridge music-tomcat;
+
+TOMCAT_IP=`docker inspect --format '{{ .NetworkSettings.Networks.bridge.IPAddress}}' music-tomcat`
+echo "TOMCAT_IP=${TOMCAT_IP}"
+
+${WORKSPACE}/test/csit/scripts/music/music-scripts/wait_for_port.sh ${TOMCAT_IP} 8080
+
+sleep 20;
+echo "########## TOMCAT Logs ##########"
+docker logs music-tomcat
+# Needed only if we need to look at localhost logs.
+echo "########## MUSIC localhost Log ##########"
+docker exec music-tomcat /bin/bash -c "cat /usr/local/tomcat/logs/localhost*"
+
+echo "########## MUSIC Log ##########"
+ls -al $MUSIC_LOGS/MUSIC
+docker exec music-tomcat /bin/bash -c "cat /opt/app/music/logs/MUSIC/music.log"
+#echo "########## MUSIC error log ##########"
+#docker exec music-tomcat /bin/bash -c "cat /opt/app/music/logs/MUSIC/error.log"
+
+echo "########## inspect docker things for tracing purpose ##########"
+docker inspect music-db
+docker inspect music-zk
+docker inspect music-tomcat
+docker inspect music-war
+docker volume inspect music-vol
+docker network inspect music-net
+
+echo "########## dump music content just after music is started ##########"
+docker exec music-db /usr/bin/nodetool status
+docker exec music-db /usr/bin/cqlsh -unelson24 -pwinman123 -e 'SELECT * FROM system_schema.keyspaces'
+docker exec music-db /usr/bin/cqlsh -unelson24 -pwinman123 -e 'DESCRIBE keyspace admin'
+docker exec music-db /usr/bin/cqlsh -unelson24 -pwinman123 -e 'SELECT * FROM admin.keyspace_master'
+
+
+#
+# add here all ROBOT_VARIABLES settings
+#
+echo "########## music robot variables settings ##########";
+ROBOT_VARIABLES="-v MUSIC_HOSTNAME:http://${TOMCAT_IP} -v MUSIC_PORT:8080 -v COND_HOSTNAME:http://localhost -v COND_PORT:8091"
+
+echo ${ROBOT_VARIABLES}
+
+
+
diff --git a/plans/music/music-test-plan/teardown.sh b/plans/music/music-test-plan/teardown.sh
new file mode 100755
index 00000000..e05ef9d1
--- /dev/null
+++ b/plans/music/music-test-plan/teardown.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+
+#
+# add here below the killing of all docker containers used for music CSIT testing
+#
+echo "dump music.log files"
+ls -alF /tmp/music
+ls -alFR /tmp/music
+ls -alF /tmp/music/properties
+cat /tmp/music/properties/music.properties
+echo "===== MUSIC log =================="
+docker exec music-tomcat /bin/bash -c "cat /opt/app/music/logs/MUSIC/music.log"
+#cat /tmp/music/logs/MUSIC/music.log
+echo "===== MUSIC error log =================="
+docker exec music-tomcat /bin/bash -c "cat /opt/app/music/logs/MUSIC/error.log"
+#cat /tmp/music/logs/MUSIC/error.log
+
+echo "##########################################################";
+echo "#";
+echo "# music scripts docker containers killing";
+echo "#";
+echo "##########################################################";
+docker stop music-tomcat
+docker stop music-war
+docker stop music-zk
+docker stop music-job
+docker stop music-casstest
+docker stop music-db
+
+docker rm music-zk
+docker rm music-tomcat
+docker rm music-war
+docker rm music-job
+docker rm music-casstest
+docker rm music-db
+
+docker network rm music-net;
+sleep 5;
+
+docker volume rm music-vol
+
+#rm -Rf /tmp/music
+
+
+
+
+
diff --git a/plans/music/music-test-plan/testplan.txt b/plans/music/music-test-plan/testplan.txt
new file mode 100644
index 00000000..e53f3267
--- /dev/null
+++ b/plans/music/music-test-plan/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+music/music-suite
diff --git a/plans/optf-has/has/setup.sh b/plans/optf-has/has/setup.sh
new file mode 100755
index 00000000..a0bef71d
--- /dev/null
+++ b/plans/optf-has/has/setup.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+
+#
+# add here eventual scripts needed for music
+#
+echo "# music scripts calling";
+source ${WORKSPACE}/test/csit/scripts/optf-has/has/music_script.sh
+
+
+#
+echo "# simulator scripts calling";
+source ${WORKSPACE}/test/csit/scripts/optf-has/has/simulator_script.sh
+
+# add here eventual scripts needed for optf/has
+#
+echo "# optf/has scripts calling";
+source ${WORKSPACE}/test/csit/scripts/optf-has/has/has_script.sh
+
+#
+# add here below the start of all docker containers needed for optf/has CSIT testing
+#
+echo "# optf/has scripts docker containers spinoff";
+
+#
+# add here all the configuration steps eventually needed to be carried out for optf/has CSIT testing
+#
+echo "# optf/has configuration step";
+
+
+#
+# add here all ROBOT_VARIABLES settings
+#
+echo "# optf/has robot variables settings";
+echo "conductor ip = ${COND_IP}"
+echo "music ip = ${TOMCAT_IP}"
+
+ROBOT_VARIABLES="-v MUSIC_HOSTNAME:http://${TOMCAT_IP} -v MUSIC_PORT:8080 -v COND_HOSTNAME:http://${COND_IP} -v COND_PORT:8091"
+
+echo ${ROBOT_VARIABLES}
+
+
+
diff --git a/plans/optf-has/has/teardown.sh b/plans/optf-has/has/teardown.sh
new file mode 100755
index 00000000..41d7aff2
--- /dev/null
+++ b/plans/optf-has/has/teardown.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+
+#
+# add here below the killing of all docker containers used for optf/has CSIT testing
+#
+
+#
+# optf/has scripts docker containers killing";
+#
+echo "# optf/has has scripts calling";
+source ${WORKSPACE}/test/csit/scripts/optf-has/has/has_teardown_script.sh
+
+echo "# optf/has simulator scripts calling";
+source ${WORKSPACE}/test/csit/scripts/optf-has/has/simulator_teardown_script.sh
+
+echo "# optf/has music scripts calling";
+source ${WORKSPACE}/test/csit/scripts/optf-has/has/music_teardown_script.sh
+
diff --git a/plans/optf-has/has/testplan.txt b/plans/optf-has/has/testplan.txt
new file mode 100644
index 00000000..980050c9
--- /dev/null
+++ b/plans/optf-has/has/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+optf-has/has
diff --git a/plans/optf-has/osdf/sample.txt b/plans/optf-has/osdf/sample.txt
new file mode 100644
index 00000000..9f4e8d7d
--- /dev/null
+++ b/plans/optf-has/osdf/sample.txt
@@ -0,0 +1 @@
+#test
diff --git a/plans/policy/apex-pdp/setup.sh b/plans/policy/apex-pdp/setup.sh
new file mode 100644
index 00000000..7ab5b9e2
--- /dev/null
+++ b/plans/policy/apex-pdp/setup.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+# ============LICENSE_START=======================================================
+#  Copyright (C) 2018 Ericsson. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+docker run -d --name apex -p 12561:12561 -p 23324:23324 -it nexus3.onap.org:10001/onap/policy-apex-pdp:2.0-SNAPSHOT-latest /bin/bash -c "/opt/app/policy/apex-pdp/bin/apexEngine.sh -c /opt/app/policy/apex-pdp/examples/config/SampleDomain/RESTServerJsonEvent.json"
+
+APEX_IP=`get-instance-ip.sh apex`
+echo APEX IP IS ${APEX_IP}
+Wait for initialization
+for i in {1..10}; do
+   curl -sS ${APEX_IP}:23324 && break
+   echo sleep $i
+   sleep $i
+done
+
+ROBOT_VARIABLES="-v APEX_IP:${APEX_IP}"
diff --git a/plans/policy/apex-pdp/teardown.sh b/plans/policy/apex-pdp/teardown.sh
new file mode 100644
index 00000000..ca8e92e6
--- /dev/null
+++ b/plans/policy/apex-pdp/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+# ============LICENSE_START=======================================================
+#  Copyright (C) 2018 Ericsson. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+kill-instance.sh apex
diff --git a/plans/policy/apex-pdp/testplan.txt b/plans/policy/apex-pdp/testplan.txt
new file mode 100644
index 00000000..cee9abda
--- /dev/null
+++ b/plans/policy/apex-pdp/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+policy/apex-pdp/apex-pdp-test.robot
diff --git a/plans/policy/distribution/setup.sh b/plans/policy/distribution/setup.sh
new file mode 100644
index 00000000..9b894e3d
--- /dev/null
+++ b/plans/policy/distribution/setup.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+# ============LICENSE_START=======================================================
+#  Copyright (C) 2018 Ericsson. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+docker run -d --name policy-distribution -p 6969:6969 -it nexus3.onap.org:10001/onap/policy-distribution:2.0.0-SNAPSHOT-latest 
+
+POLICY_DISTRIBUTION_IP=`get-instance-ip.sh policy-distribution`
+echo DISTRIBUTION IP IS ${POLICY_DISTRIBUTION_IP}
+Wait for initialization
+for i in {1..10}; do
+   curl -sS ${POLICY_DISTRIBUTION_IP}:6969 && break
+   echo sleep $i
+   sleep $i
+done
+
+ROBOT_VARIABLES="-v POLICY_DISTRIBUTION_IP:${POLICY_DISTRIBUTION_IP}"
diff --git a/plans/policy/distribution/teardown.sh b/plans/policy/distribution/teardown.sh
new file mode 100644
index 00000000..562df6b3
--- /dev/null
+++ b/plans/policy/distribution/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+# ============LICENSE_START=======================================================
+#  Copyright (C) 2018 Ericsson. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+# ============LICENSE_END=========================================================
+
+kill-instance.sh policy-distribution
diff --git a/plans/policy/distribution/testplan.txt b/plans/policy/distribution/testplan.txt
new file mode 100644
index 00000000..6f74cce4
--- /dev/null
+++ b/plans/policy/distribution/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+policy/distribution/distribution-test.robot
diff --git a/plans/policy/health/setup.sh b/plans/policy/health/setup.sh
new file mode 100755
index 00000000..21f58eb6
--- /dev/null
+++ b/plans/policy/health/setup.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+#
+# Copyright 2017 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+source ${SCRIPTS}/common_functions.sh
+
+docker run --name i-mock -d jamesdbloom/mockserver
+MOCK_IP=`get-instance-ip.sh i-mock`
+echo ${MOCK_IP}
+
+docker inspect i-mock
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${MOCK_IP}:1080 && break
+    echo sleep $i
+    sleep $i
+done
+
+${WORKSPACE}/test/csit/scripts/policy/mock-hello.sh ${MOCK_IP}
+
+source ${WORKSPACE}/test/csit/scripts/policy/script1.sh
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MOCK_IP:${MOCK_IP} -v IP:${IP} -v POLICY_IP:${POLICY_IP} -v PDP_IP:${PDP_IP} -v DOCKER_IP:${DOCKER_IP}" 
+export PDP_IP=${PDP_IP}
+export POLICY_IP=${POLICY_IP}
+export DOCKER_IP=${DOCKER_IP}
+
+#Get current IP of VM
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+export HOST_IP=${HOST_IP}
diff --git a/plans/policy/health/teardown.sh b/plans/policy/health/teardown.sh
new file mode 100755
index 00000000..f1f0b21c
--- /dev/null
+++ b/plans/policy/health/teardown.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+#
+# Copyright 2017 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+function kill_instance() {
+local name=$1
+docker logs "${name}" >> "${WORKSPACE}"/archives/"${name}".log
+docker kill "${name}"
+docker rm -v "${name}"
+}
+
+mkdir -p "${WORKSPACE}"/archives
+
+kill_instance i-mock
+kill_instance drools
+kill_instance pdp
+kill_instance brmsgw
+kill_instance pap
+kill_instance nexus
+kill_instance mariadb
+
+rm -fr "${WORK_DIR}"
+
diff --git a/plans/policy/health/testplan.txt b/plans/policy/health/testplan.txt
new file mode 100644
index 00000000..bb858748
--- /dev/null
+++ b/plans/policy/health/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+policy/suite1
diff --git a/plans/portal-sdk/testsuite/.env b/plans/portal-sdk/testsuite/.env
new file mode 100644
index 00000000..27e9aa3f
--- /dev/null
+++ b/plans/portal-sdk/testsuite/.env
@@ -0,0 +1,42 @@
+# Environment settings
+# used by docker-compose AND by other shell scripts
+# Host directory with config files
+
+# Following are ALSO used in demo/boot/portal_vm_init.sh
+EP_IMG_NAME=onap/portal-app
+SDK_IMG_NAME=onap/portal-sdk
+DB_IMG_NAME=onap/portal-db
+CDR_IMG_NAME=onap/music/cassandra_music
+ZK_IMG_NAME=zookeeper
+WMS_IMG_NAME=onap/portal-wms
+# Deployed with portal; built elsewhere
+CLI_IMG_NAME=onap/cli
+
+# Tag all images with this
+DOCKER_IMAGE_VERSION=2.1-STAGING-latest
+CLI_DOCKER_VERSION=1.1-STAGING-latest
+CDR_IMAGE_VERSION=latest
+ZK_IMAGE_VERSION=3.4
+NEXUS_DOCKER_REPO=nexus3.onap.org:10003
+
+# This is used during builds and in docker-compose;
+# it is never published to the ONAP registry.
+PORTAL_TAG=beijing
+
+# Name of directory in apps container (NOT host)
+WEBAPPS_DIR=/opt/apache-tomcat-8.0.37/webapps
+
+# Required settings with default values.
+# Export shell environment variables on ALL hosts.
+LOGS_DIR=./logs
+PROPS_DIR=./properties
+
+# Optional settings with no defaults.
+EXTRA_HOST_IP=""
+EXTRA_HOST_NAME=""
+# Export shell environment variables on hosts with no DNS;
+# a line is added to docker container's /etc/hosts.
+# For example:
+#EXTRA_HOST_IP="-i ${HOST_IP}"
+#EXTRA_HOST_NAME="-n portal.api.simpledemo.openecomp.org"
+
diff --git a/plans/portal-sdk/testsuite/docker-compose.yml b/plans/portal-sdk/testsuite/docker-compose.yml
new file mode 100644
index 00000000..dda74c91
--- /dev/null
+++ b/plans/portal-sdk/testsuite/docker-compose.yml
@@ -0,0 +1,151 @@
+# docker-compose for ONAP portal containers: database, microservice, portal apps.
+# Relies on .env file, which CANNOT be specified via command-line option
+# Works in multiple environments; does not pull from a Nexus registry.
+# Exposes the portal apps docker (but not DB nor WMS dockers) on the host network.
+# Images must be pulled from ONAP Nexus registry after logging in like this:
+# docker login -u USER -p PASS nexus3.onap.org:10001
+# Uses healthcheck feature added in docker-compose v2.1
+
+version: '2.1'
+
+services:
+
+  cli:
+    image: ${CLI_IMG_NAME}:${PORTAL_TAG}
+    environment:
+      CLI_MODE: 'daemon'
+    ports:
+      - 8080:80
+      - 9090:8080
+    logging:
+      driver: json-file
+
+  # Config files may use hostname "portal-db"
+  portal-db:
+    image: ${DB_IMG_NAME}:${PORTAL_TAG}
+    environment:
+      MYSQL_ROOT_PASSWORD: 'Aa123456'
+    expose:
+      - 3306
+    volumes:
+      # Just specify a path and let the Engine create a volume
+      - /var/lib/mysql
+      # Inject the onboarding script at start time
+      - ./Apps_Users_OnBoarding_Script.sql:/docker-entrypoint-initdb.d/zzz_apps_users_onboarding.sql
+    logging:
+      driver: json-file
+    healthcheck:
+      test: [ "CMD", "mysqladmin", "ping", "-h", "localhost" ]
+      timeout: 10s
+      retries: 30
+      
+  # Config files may use hostname "portal-cassandra"
+  portal-cassandra:
+    image: ${CDR_IMG_NAME}:${PORTAL_TAG}
+    environment:
+      - CASSUSER=root
+      - CASSPASS=Aa123456
+    expose:
+      - 7000
+      - 7001
+      - 7199
+      - 9042
+      - 9160
+    ports:
+      - 7000:7000
+      - 7001:7001
+      - 7199:7199
+      - 9042:9042
+      - 9160:9160
+    volumes:
+      - ./portal.cql:/docker-entrypoint-initdb.d/zzz_portal.cql
+      - ./portalsdk.cql:/docker-entrypoint-initdb.d/zzz_portalsdk.cql
+    links:
+      - portal-db      
+    depends_on:
+      portal-db:
+        condition: service_healthy
+        
+  # Config files may use hostname "portal-zk"
+  portal-zk:
+    image: ${ZK_IMG_NAME}:${PORTAL_TAG}
+    expose:
+      - 2181
+    ports:
+      - 2181:2181           
+
+  # The app config file uses the docker name above
+  portal-wms:
+    image: ${WMS_IMG_NAME}:${PORTAL_TAG}
+    expose:
+      - 8082
+    links:
+      - portal-db
+    depends_on:
+      portal-db:
+        condition: service_healthy
+    volumes:
+      - ${PROPS_DIR}/ONAPWIDGETMS/application.properties:/application.properties
+      - ${PROPS_DIR}/ONAPWIDGETMS/application.yml:/application.yml
+    command:
+      - /start-wms.sh
+    logging:
+      driver: json-file
+
+  portal-app:
+    image: ${EP_IMG_NAME}:${PORTAL_TAG}
+    ports:
+      - 8989:8080
+      - 8010:8009
+      - 8006:8005
+    links:
+      - portal-db
+      - portal-wms
+      - portal-zk
+      - portal-cassandra
+    depends_on:
+      portal-db:
+        condition: service_healthy
+      portal-wms:
+        condition: service_started
+    volumes:
+      - ${PROPS_DIR}/ONAPPORTAL/system.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/conf/system.properties
+      - ${PROPS_DIR}/ONAPPORTAL/fusion.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/fusion/conf/fusion.properties
+      - ${PROPS_DIR}/ONAPPORTAL/portal.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/portal.properties
+      - ${PROPS_DIR}/ONAPPORTAL/music.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/music.properties
+      - ${PROPS_DIR}/ONAPPORTAL/openid-connect.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/openid-connect.properties
+      - ${PROPS_DIR}/ONAPPORTAL/logback.xml:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/logback.xml
+      - ${LOGS_DIR}:/opt/apache-tomcat-8.0.37/logs
+    command:
+      - /start-apache-tomcat.sh
+      # see comments in .env file
+      - -i
+      - $EXTRA_HOST_IP
+      - -n
+      - $EXTRA_HOST_NAME
+    logging:
+      driver: json-file
+
+  portal-sdk:
+    image: ${SDK_IMG_NAME}:${PORTAL_TAG}
+    ports:
+      - 8990:8080
+    links:
+      - portal-db
+      - portal-wms
+      - portal-zk
+      - portal-cassandra
+    depends_on:
+      portal-db:
+        condition: service_healthy
+    volumes:
+      - ${PROPS_DIR}/ONAPPORTALSDK/fusion.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/fusion/conf/fusion.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/system.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/conf/system.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/portal.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/classes/portal.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/music.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/classes/music.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/logback.xml:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/classes/logback.xml
+      - ${LOGS_DIR}:/opt/apache-tomcat-8.0.37/logs
+    command:
+      - /start-apache-tomcat.sh
+    logging:
+      driver: json-file
diff --git a/plans/portal-sdk/testsuite/setup.sh b/plans/portal-sdk/testsuite/setup.sh
new file mode 100644
index 00000000..6510311c
--- /dev/null
+++ b/plans/portal-sdk/testsuite/setup.sh
@@ -0,0 +1,184 @@
+#!/bin/bash
+# Starts docker containers for ONAP Portal
+# This version for Amsterdam/R1 of Portal, uses docker-compose.
+# Temporarily maintained in portal/deliveries area;
+# replicated from the ONAP demo/boot area due to release concerns.
+
+# Start Xvfb
+echo -e "Starting Xvfb on display ${DISPLAY} with res ${RES}"
+Xvfb ${DISPLAY} -ac -screen 0 ${RES} +extension RANDR &
+XVFBPID=$!
+# Get pid of this spawned process to make sure we kill the correct process later
+
+#Get current IP of VM
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+export HOST_IP=${HOST_IP}
+
+
+
+if ! ifconfig docker0; then
+if ! ifconfig ens3; then
+echo "Could not determine IP address"
+exit 1
+fi
+export DOCKER_IP_IP=`ifconfig ens3 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'`
+else
+export DOCKER_IP=`ifconfig docker0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'`
+fi
+echo $DOCKER_IP
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+#ROBOT_VARIABLES="-v MOCK_IP:${MOCK_IP} -v IP:${IP} -v POLICY_IP:${POLICY_IP} -v DOCKER_IP:${DOCKER_IP}"
+#export PORTAL_IP=${PORTAL_IP}
+ROBOT_VARIABLES="-v MOCK_IP:${MOCK_IP} -v IP:${IP}  -v DOCKER_IP:${DOCKER_IP}"
+export DOCKER_IP=${DOCKER_IP}
+
+
+
+
+# be verbose
+set -x
+
+# Establish environment variables
+NEXUS_USERNAME=docker
+NEXUS_PASSWD=docker
+NEXUS_DOCKER_REPO=nexus3.onap.org:10003
+
+
+
+CURR="$(pwd)"
+git clone http://gerrit.onap.org/r/portal -b "master"
+
+# Refresh configuration and scripts
+cd portal
+git pull
+cd deliveries
+rm .env
+#rm docker-compose.yml
+cp $CURR/.env .
+#cp $CURR/docker-compose.yml .
+#cd  properties_simpledemo/ECOMPPORTALAPP
+#rm  system.properties
+#cp  $CURR/system.properties .
+#cd ../..
+# Get image names used below from docker-compose environment file
+source $CURR/.env
+#source .env
+
+# Make inter-app communication work in CSIT
+export EXTRA_HOST_IP="-i ${HOST_IP}"
+export EXTRA_HOST_NAME="-n portal.api.simpledemo.onap.org"
+
+
+# Copy property files to new directory
+mkdir -p $PROPS_DIR
+cp -r properties_simpledemo/* $PROPS_DIR
+# Also create logs directory
+mkdir -p $LOGS_DIR
+
+
+# Refresh images
+docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+docker pull $NEXUS_DOCKER_REPO/$DB_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$EP_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$SDK_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$CDR_IMG_NAME:$CDR_IMAGE_VERSION
+docker pull $ZK_IMG_NAME:$ZK_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$WMS_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$CLI_IMG_NAME:$CLI_DOCKER_VERSION
+
+# Tag them as expected by docker-compose file
+docker tag $NEXUS_DOCKER_REPO/$DB_IMG_NAME:$DOCKER_IMAGE_VERSION $DB_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$EP_IMG_NAME:$DOCKER_IMAGE_VERSION $EP_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$SDK_IMG_NAME:$DOCKER_IMAGE_VERSION $SDK_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$CDR_IMG_NAME:$CDR_IMAGE_VERSION $CDR_IMG_NAME:$PORTAL_TAG
+docker tag $ZK_IMG_NAME:$ZK_IMAGE_VERSION $ZK_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$WMS_IMG_NAME:$DOCKER_IMAGE_VERSION $WMS_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$CLI_IMG_NAME:$CLI_DOCKER_VERSION $CLI_IMG_NAME:$PORTAL_TAG
+
+
+# compose is not in /usr/bin
+docker-compose down
+docker-compose up -d
+
+#${HOSTNAME}="portal.api.simpledemo.openecomp.org"
+#echo "$HOST_IP ${HOSTNAME}" >> /etc/hosts
+
+#echo "$HOST_IP portal.api.simpledemo.openecomp.org" >> /etc/hosts
+#sudo sed -i "2i$HOST_IP  portal.api.simpledemo.openecomp.org"   /etc/hosts
+
+#HOST="portal.api.simpledemo.openecomp.org"
+#sudo sed -i "/$HOST/ s/.*/$HOST_IP\t$HOST/g" /etc/hosts
+
+# insert/update hosts entry
+ip_address=$HOST_IP
+host_name="portal.api.simpledemo.onap.org"
+# find existing instances in the host file and save the line numbers
+matches_in_hosts="$(grep -n $host_name /etc/hosts | cut -f1 -d:)"
+host_entry="${ip_address} ${host_name}"
+
+echo "$host_entry"
+
+if [ ! -z "$matches_in_hosts" ]
+then
+echo "Updating existing hosts entry."
+# iterate over the line numbers on which matches were found
+while read -r line_number; do
+# replace the text of each line with the desired host entry
+sudo sed -i '' "${line_number}s/.*/${host_entry} /" /etc/hosts
+echo "${line_number}   ${host_entry}"
+done <<< "$matches_in_hosts"
+else
+echo "Adding new hosts entry."
+echo "$host_entry" | sudo tee -a /etc/hosts > /dev/null
+fi
+
+
+
+sleep 6m
+
+# WAIT 5 minutes maximum and test every 5 seconds if Portal up using HealthCheck API
+TIME_OUT=500
+INTERVAL=20
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/portalApi/healthCheck); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo Portal and its database well started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if Portal is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+fi
+
+#sleep 3m
+
+
+
+#if [ "$TIME" -ge "$TIME_OUT" ]; then
+#   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+#fi
+
+
+
+
+
+#Get current IP of VM
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+export HOST_IP=${HOST_IP}
+
+#docker logs deliveries_portal-db_1
+docker logs deliveries_portal-app_1
+docker logs deliveries_portal-wms_1
+
+
+
+
diff --git a/plans/portal-sdk/testsuite/teardown.sh b/plans/portal-sdk/testsuite/teardown.sh
new file mode 100644
index 00000000..e0431a72
--- /dev/null
+++ b/plans/portal-sdk/testsuite/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2017 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+docker kill $(docker ps -q)
+
+
diff --git a/plans/portal-sdk/testsuite/testplan.txt b/plans/portal-sdk/testsuite/testplan.txt
new file mode 100644
index 00000000..27f8af34
--- /dev/null
+++ b/plans/portal-sdk/testsuite/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+portal-sdk/testsuites
diff --git a/plans/portal/testsuite/.env b/plans/portal/testsuite/.env
new file mode 100644
index 00000000..27e9aa3f
--- /dev/null
+++ b/plans/portal/testsuite/.env
@@ -0,0 +1,42 @@
+# Environment settings
+# used by docker-compose AND by other shell scripts
+# Host directory with config files
+
+# Following are ALSO used in demo/boot/portal_vm_init.sh
+EP_IMG_NAME=onap/portal-app
+SDK_IMG_NAME=onap/portal-sdk
+DB_IMG_NAME=onap/portal-db
+CDR_IMG_NAME=onap/music/cassandra_music
+ZK_IMG_NAME=zookeeper
+WMS_IMG_NAME=onap/portal-wms
+# Deployed with portal; built elsewhere
+CLI_IMG_NAME=onap/cli
+
+# Tag all images with this
+DOCKER_IMAGE_VERSION=2.1-STAGING-latest
+CLI_DOCKER_VERSION=1.1-STAGING-latest
+CDR_IMAGE_VERSION=latest
+ZK_IMAGE_VERSION=3.4
+NEXUS_DOCKER_REPO=nexus3.onap.org:10003
+
+# This is used during builds and in docker-compose;
+# it is never published to the ONAP registry.
+PORTAL_TAG=beijing
+
+# Name of directory in apps container (NOT host)
+WEBAPPS_DIR=/opt/apache-tomcat-8.0.37/webapps
+
+# Required settings with default values.
+# Export shell environment variables on ALL hosts.
+LOGS_DIR=./logs
+PROPS_DIR=./properties
+
+# Optional settings with no defaults.
+EXTRA_HOST_IP=""
+EXTRA_HOST_NAME=""
+# Export shell environment variables on hosts with no DNS;
+# a line is added to docker container's /etc/hosts.
+# For example:
+#EXTRA_HOST_IP="-i ${HOST_IP}"
+#EXTRA_HOST_NAME="-n portal.api.simpledemo.openecomp.org"
+
diff --git a/plans/portal/testsuite/docker-compose.yml b/plans/portal/testsuite/docker-compose.yml
new file mode 100644
index 00000000..dda74c91
--- /dev/null
+++ b/plans/portal/testsuite/docker-compose.yml
@@ -0,0 +1,151 @@
+# docker-compose for ONAP portal containers: database, microservice, portal apps.
+# Relies on .env file, which CANNOT be specified via command-line option
+# Works in multiple environments; does not pull from a Nexus registry.
+# Exposes the portal apps docker (but not DB nor WMS dockers) on the host network.
+# Images must be pulled from ONAP Nexus registry after logging in like this:
+# docker login -u USER -p PASS nexus3.onap.org:10001
+# Uses healthcheck feature added in docker-compose v2.1
+
+version: '2.1'
+
+services:
+
+  cli:
+    image: ${CLI_IMG_NAME}:${PORTAL_TAG}
+    environment:
+      CLI_MODE: 'daemon'
+    ports:
+      - 8080:80
+      - 9090:8080
+    logging:
+      driver: json-file
+
+  # Config files may use hostname "portal-db"
+  portal-db:
+    image: ${DB_IMG_NAME}:${PORTAL_TAG}
+    environment:
+      MYSQL_ROOT_PASSWORD: 'Aa123456'
+    expose:
+      - 3306
+    volumes:
+      # Just specify a path and let the Engine create a volume
+      - /var/lib/mysql
+      # Inject the onboarding script at start time
+      - ./Apps_Users_OnBoarding_Script.sql:/docker-entrypoint-initdb.d/zzz_apps_users_onboarding.sql
+    logging:
+      driver: json-file
+    healthcheck:
+      test: [ "CMD", "mysqladmin", "ping", "-h", "localhost" ]
+      timeout: 10s
+      retries: 30
+      
+  # Config files may use hostname "portal-cassandra"
+  portal-cassandra:
+    image: ${CDR_IMG_NAME}:${PORTAL_TAG}
+    environment:
+      - CASSUSER=root
+      - CASSPASS=Aa123456
+    expose:
+      - 7000
+      - 7001
+      - 7199
+      - 9042
+      - 9160
+    ports:
+      - 7000:7000
+      - 7001:7001
+      - 7199:7199
+      - 9042:9042
+      - 9160:9160
+    volumes:
+      - ./portal.cql:/docker-entrypoint-initdb.d/zzz_portal.cql
+      - ./portalsdk.cql:/docker-entrypoint-initdb.d/zzz_portalsdk.cql
+    links:
+      - portal-db      
+    depends_on:
+      portal-db:
+        condition: service_healthy
+        
+  # Config files may use hostname "portal-zk"
+  portal-zk:
+    image: ${ZK_IMG_NAME}:${PORTAL_TAG}
+    expose:
+      - 2181
+    ports:
+      - 2181:2181           
+
+  # The app config file uses the docker name above
+  portal-wms:
+    image: ${WMS_IMG_NAME}:${PORTAL_TAG}
+    expose:
+      - 8082
+    links:
+      - portal-db
+    depends_on:
+      portal-db:
+        condition: service_healthy
+    volumes:
+      - ${PROPS_DIR}/ONAPWIDGETMS/application.properties:/application.properties
+      - ${PROPS_DIR}/ONAPWIDGETMS/application.yml:/application.yml
+    command:
+      - /start-wms.sh
+    logging:
+      driver: json-file
+
+  portal-app:
+    image: ${EP_IMG_NAME}:${PORTAL_TAG}
+    ports:
+      - 8989:8080
+      - 8010:8009
+      - 8006:8005
+    links:
+      - portal-db
+      - portal-wms
+      - portal-zk
+      - portal-cassandra
+    depends_on:
+      portal-db:
+        condition: service_healthy
+      portal-wms:
+        condition: service_started
+    volumes:
+      - ${PROPS_DIR}/ONAPPORTAL/system.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/conf/system.properties
+      - ${PROPS_DIR}/ONAPPORTAL/fusion.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/fusion/conf/fusion.properties
+      - ${PROPS_DIR}/ONAPPORTAL/portal.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/portal.properties
+      - ${PROPS_DIR}/ONAPPORTAL/music.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/music.properties
+      - ${PROPS_DIR}/ONAPPORTAL/openid-connect.properties:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/openid-connect.properties
+      - ${PROPS_DIR}/ONAPPORTAL/logback.xml:${WEBAPPS_DIR}/ONAPPORTAL/WEB-INF/classes/logback.xml
+      - ${LOGS_DIR}:/opt/apache-tomcat-8.0.37/logs
+    command:
+      - /start-apache-tomcat.sh
+      # see comments in .env file
+      - -i
+      - $EXTRA_HOST_IP
+      - -n
+      - $EXTRA_HOST_NAME
+    logging:
+      driver: json-file
+
+  portal-sdk:
+    image: ${SDK_IMG_NAME}:${PORTAL_TAG}
+    ports:
+      - 8990:8080
+    links:
+      - portal-db
+      - portal-wms
+      - portal-zk
+      - portal-cassandra
+    depends_on:
+      portal-db:
+        condition: service_healthy
+    volumes:
+      - ${PROPS_DIR}/ONAPPORTALSDK/fusion.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/fusion/conf/fusion.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/system.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/conf/system.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/portal.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/classes/portal.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/music.properties:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/classes/music.properties
+      - ${PROPS_DIR}/ONAPPORTALSDK/logback.xml:${WEBAPPS_DIR}/ONAPPORTALSDK/WEB-INF/classes/logback.xml
+      - ${LOGS_DIR}:/opt/apache-tomcat-8.0.37/logs
+    command:
+      - /start-apache-tomcat.sh
+    logging:
+      driver: json-file
diff --git a/plans/portal/testsuite/setup.sh b/plans/portal/testsuite/setup.sh
new file mode 100644
index 00000000..76cf5f37
--- /dev/null
+++ b/plans/portal/testsuite/setup.sh
@@ -0,0 +1,184 @@
+#!/bin/bash
+# Starts docker containers for ONAP Portal
+# This version for Amsterdam/R1 of Portal, uses docker-compose.
+# Temporarily maintained in portal/deliveries area;
+# replicated from the ONAP demo/boot area due to release concerns.
+
+# Start Xvfb
+echo -e "Starting Xvfb on display ${DISPLAY} with res ${RES}"
+Xvfb ${DISPLAY} -ac -screen 0 ${RES} +extension RANDR &
+XVFBPID=$!
+# Get pid of this spawned process to make sure we kill the correct process later
+
+#Get current IP of VM
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+export HOST_IP=${HOST_IP}
+
+
+
+if ! ifconfig docker0; then
+if ! ifconfig ens3; then
+echo "Could not determine IP address"
+exit 1
+fi
+export DOCKER_IP_IP=`ifconfig ens3 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'`
+else
+export DOCKER_IP=`ifconfig docker0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'`
+fi
+echo $DOCKER_IP
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+#ROBOT_VARIABLES="-v MOCK_IP:${MOCK_IP} -v IP:${IP} -v POLICY_IP:${POLICY_IP} -v DOCKER_IP:${DOCKER_IP}"
+#export PORTAL_IP=${PORTAL_IP}
+ROBOT_VARIABLES="-v MOCK_IP:${MOCK_IP} -v IP:${IP}  -v DOCKER_IP:${DOCKER_IP}"
+export DOCKER_IP=${DOCKER_IP}
+
+
+
+
+# be verbose
+set -x
+
+# Establish environment variables
+NEXUS_USERNAME=docker
+NEXUS_PASSWD=docker
+NEXUS_DOCKER_REPO=nexus3.onap.org:10003
+
+
+
+CURR="$(pwd)"
+git clone http://gerrit.onap.org/r/portal -b "master"
+
+# Refresh configuration and scripts
+cd portal
+git pull
+cd deliveries
+rm .env
+#rm docker-compose.yml
+cp $CURR/.env .
+#cp $CURR/docker-compose.yml .
+#cd  properties_simpledemo/ECOMPPORTALAPP
+#rm  system.properties
+#cp  $CURR/system.properties .
+#cd ../..
+# Get image names used below from docker-compose environment file
+source $CURR/.env
+#source .env
+
+# Make inter-app communication work in CSIT
+export EXTRA_HOST_IP="-i ${HOST_IP}"
+export EXTRA_HOST_NAME="-n portal.api.simpledemo.onap.org"
+
+
+# Copy property files to new directory
+mkdir -p $PROPS_DIR
+cp -r properties_simpledemo/* $PROPS_DIR
+# Also create logs directory
+mkdir -p $LOGS_DIR
+
+
+# Refresh images
+docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+docker pull $NEXUS_DOCKER_REPO/$DB_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$EP_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$SDK_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$CDR_IMG_NAME:$CDR_IMAGE_VERSION
+docker pull $ZK_IMG_NAME:$ZK_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$WMS_IMG_NAME:$DOCKER_IMAGE_VERSION
+docker pull $NEXUS_DOCKER_REPO/$CLI_IMG_NAME:$CLI_DOCKER_VERSION
+
+# Tag them as expected by docker-compose file
+docker tag $NEXUS_DOCKER_REPO/$DB_IMG_NAME:$DOCKER_IMAGE_VERSION $DB_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$EP_IMG_NAME:$DOCKER_IMAGE_VERSION $EP_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$SDK_IMG_NAME:$DOCKER_IMAGE_VERSION $SDK_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$CDR_IMG_NAME:$CDR_IMAGE_VERSION $CDR_IMG_NAME:$PORTAL_TAG
+docker tag $ZK_IMG_NAME:$ZK_IMAGE_VERSION $ZK_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$WMS_IMG_NAME:$DOCKER_IMAGE_VERSION $WMS_IMG_NAME:$PORTAL_TAG
+docker tag $NEXUS_DOCKER_REPO/$CLI_IMG_NAME:$CLI_DOCKER_VERSION $CLI_IMG_NAME:$PORTAL_TAG
+
+
+# compose is not in /usr/bin
+docker-compose down
+docker-compose up -d
+
+#${HOSTNAME}="portal.api.simpledemo.openecomp.org"
+#echo "$HOST_IP ${HOSTNAME}" >> /etc/hosts
+
+#echo "$HOST_IP portal.api.simpledemo.openecomp.org" >> /etc/hosts
+#sudo sed -i "2i$HOST_IP  portal.api.simpledemo.openecomp.org"   /etc/hosts
+
+#HOST="portal.api.simpledemo.openecomp.org"
+#sudo sed -i "/$HOST/ s/.*/$HOST_IP\t$HOST/g" /etc/hosts
+
+# insert/update hosts entry
+ip_address=$HOST_IP
+host_name="portal.api.simpledemo.onap.org"
+# find existing instances in the host file and save the line numbers
+matches_in_hosts="$(grep -n $host_name /etc/hosts | cut -f1 -d:)"
+host_entry="${ip_address} ${host_name}"
+
+echo "$host_entry"
+
+if [ ! -z "$matches_in_hosts" ]
+then
+echo "Updating existing hosts entry."
+# iterate over the line numbers on which matches were found
+while read -r line_number; do
+# replace the text of each line with the desired host entry
+sudo sed -i '' "${line_number}s/.*/${host_entry} /" /etc/hosts
+echo "${line_number}   ${host_entry}"
+done <<< "$matches_in_hosts"
+else
+echo "Adding new hosts entry."
+echo "$host_entry" | sudo tee -a /etc/hosts > /dev/null
+fi
+
+
+
+sleep 6m
+
+# WAIT 5 minutes maximum and test every 5 seconds if Portal up using HealthCheck API
+TIME_OUT=500
+INTERVAL=20
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/portalApi/healthCheck); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo Portal and its database well started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if Portal is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+fi
+
+#sleep 3m
+
+
+
+#if [ "$TIME" -ge "$TIME_OUT" ]; then
+#   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+#fi
+
+
+
+
+
+#Get current IP of VM
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+export HOST_IP=${HOST_IP}
+
+docker logs deliveries_portal-db_1
+docker logs deliveries_portal-app_1
+docker logs deliveries_portal-wms_1
+
+
+
+
diff --git a/plans/portal/testsuite/teardown.sh b/plans/portal/testsuite/teardown.sh
new file mode 100644
index 00000000..e0431a72
--- /dev/null
+++ b/plans/portal/testsuite/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2017 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+docker kill $(docker ps -q)
+
+
diff --git a/plans/portal/testsuite/testplan.txt b/plans/portal/testsuite/testplan.txt
new file mode 100644
index 00000000..d7b18a5c
--- /dev/null
+++ b/plans/portal/testsuite/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+portal/testsuites
diff --git a/plans/sdc/nightly/setup.sh b/plans/sdc/nightly/setup.sh
new file mode 100644
index 00000000..a7bbaa8e
--- /dev/null
+++ b/plans/sdc/nightly/setup.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+source ${WORKSPACE}/test/csit/scripts/sdc/setup_sdc_for_apis_sanity.sh
+
+BE_IP=`get-instance-ip.sh sdc-BE`
+echo BE_IP=${BE_IP}
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v BE_IP:${BE_IP}"
+
diff --git a/plans/sdc/nightly/teardown.sh b/plans/sdc/nightly/teardown.sh
new file mode 100644
index 00000000..2074d10f
--- /dev/null
+++ b/plans/sdc/nightly/teardown.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+source ${WORKSPACE}/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh
diff --git a/plans/sdc/nightly/testplan.txt b/plans/sdc/nightly/testplan.txt
new file mode 100644
index 00000000..3011ad5c
--- /dev/null
+++ b/plans/sdc/nightly/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+sdc/nightly
diff --git a/plans/sdc/sanity/setup.sh b/plans/sdc/sanity/setup.sh
new file mode 100644
index 00000000..a7bbaa8e
--- /dev/null
+++ b/plans/sdc/sanity/setup.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+source ${WORKSPACE}/test/csit/scripts/sdc/setup_sdc_for_apis_sanity.sh
+
+BE_IP=`get-instance-ip.sh sdc-BE`
+echo BE_IP=${BE_IP}
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v BE_IP:${BE_IP}"
+
diff --git a/plans/sdc/sanity/teardown.sh b/plans/sdc/sanity/teardown.sh
new file mode 100644
index 00000000..2074d10f
--- /dev/null
+++ b/plans/sdc/sanity/teardown.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+source ${WORKSPACE}/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh
diff --git a/plans/sdc/sanity/testplan.txt b/plans/sdc/sanity/testplan.txt
new file mode 100644
index 00000000..801f37d3
--- /dev/null
+++ b/plans/sdc/sanity/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+sdc/sanity
diff --git a/plans/sdc/uiSanity/setup.sh b/plans/sdc/uiSanity/setup.sh
new file mode 100644
index 00000000..8f2bafda
--- /dev/null
+++ b/plans/sdc/uiSanity/setup.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+source ${WORKSPACE}/test/csit/scripts/sdc/setup_sdc_for_ui_sanity.sh
+
+BE_IP=`get-instance-ip.sh sdc-BE`
+echo BE_IP=${BE_IP}
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v BE_IP:${BE_IP}"
+
diff --git a/plans/sdc/uiSanity/teardown.sh b/plans/sdc/uiSanity/teardown.sh
new file mode 100644
index 00000000..2074d10f
--- /dev/null
+++ b/plans/sdc/uiSanity/teardown.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+
+source ${WORKSPACE}/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh
diff --git a/plans/sdc/uiSanity/testplan.txt b/plans/sdc/uiSanity/testplan.txt
new file mode 100644
index 00000000..801f37d3
--- /dev/null
+++ b/plans/sdc/uiSanity/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+sdc/sanity
diff --git a/plans/sdnc/healthcheck/health_check.sh b/plans/sdnc/healthcheck/health_check.sh
new file mode 100644
index 00000000..e8b5056d
--- /dev/null
+++ b/plans/sdnc/healthcheck/health_check.sh
@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+unset http_proxy https_proxy
+
+response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck )
+
+if [ "$response" == "200" ]; then
+    echo "SDNC health check passed."
+    exit 0;
+fi
+
+echo "SDNC health check failed with response code ${response}."
+exit 1
diff --git a/plans/sdnc/healthcheck/setup.sh b/plans/sdnc/healthcheck/setup.sh
new file mode 100644
index 00000000..991ba18b
--- /dev/null
+++ b/plans/sdnc/healthcheck/setup.sh
@@ -0,0 +1,139 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+source ${WORKSPACE}/test/csit/scripts/sdnc/script1.sh
+
+export NEXUS_USERNAME=docker
+export NEXUS_PASSWD=docker
+export NEXUS_DOCKER_REPO=nexus3.onap.org:10001
+export DMAAP_TOPIC=AUTO
+export DOCKER_IMAGE_VERSION=1.4-STAGING-latest
+export CCSDK_DOCKER_IMAGE_VERSION=0.3-STAGING-latest
+
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
+
+if [ "$MTU" == "" ]; then
+	  export MTU="1450"
+fi
+
+
+# Clone SDNC repo to get docker-compose for SDNC
+mkdir -p $WORKSPACE/archives/sdnc
+cd $WORKSPACE/archives
+git clone -b master --single-branch --depth=1 http://gerrit.onap.org/r/sdnc/oam.git sdnc
+cd $WORKSPACE/archives/sdnc
+git pull
+unset http_proxy https_proxy
+cd $WORKSPACE/archives/sdnc/installation/src/main/yaml
+
+sed -i "s/DMAAP_TOPIC_ENV=.*/DMAAP_TOPIC_ENV="AUTO"/g" docker-compose.yml
+docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-image:$DOCKER_IMAGE_VERSION onap/sdnc-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-ansible-server-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-ansible-server-image:$DOCKER_IMAGE_VERSION onap/sdnc-ansible-server-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/ccsdk-dgbuilder-image:$CCSDK_DOCKER_IMAGE_VERSION onap/ccsdk-dgbuilder-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/admportal-sdnc-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/admportal-sdnc-image:$DOCKER_IMAGE_VERSION onap/admportal-sdnc-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-ueb-listener-image:$DOCKER_IMAGE_VERSION
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-ueb-listener-image:$DOCKER_IMAGE_VERSION onap/sdnc-ueb-listener-image:latest
+
+docker pull $NEXUS_DOCKER_REPO/onap/sdnc-dmaap-listener-image:$DOCKER_IMAGE_VERSION
+
+docker tag $NEXUS_DOCKER_REPO/onap/sdnc-dmaap-listener-image:$DOCKER_IMAGE_VERSION onap/sdnc-dmaap-listener-image:latest
+
+
+# start SDNC containers with docker compose and configuration from docker-compose.yml
+docker-compose up -d
+
+# WAIT 10 minutes maximum and test every 5 seconds if SDNC is up using HealthCheck API
+TIME_OUT=1000
+INTERVAL=30
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck ); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo SDNC started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+#sleep 800
+
+TIME_OUT=1500
+INTERVAL=60
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+
+docker exec sdnc_controller_container rm -f /opt/opendaylight/current/etc/host.key
+response=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client system:start-level)
+docker exec sdnc_controller_container rm -f /opt/opendaylight/current/etc/host.key
+num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+
+  if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+    echo SDNC karaf started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+response=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client system:start-level)
+num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+
+  if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+    num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | tail -1 | cut -d\| -f1)
+    num_failed_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure | wc -l)
+    failed_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client bundle:list | grep Failure)
+    echo There is/are $num_failed_bundles failed bundles out of $num_bundles installed bundles.
+  fi
+
+if [ "$num_failed_bundles" -ge 1 ]; then
+  echo "The following bundle(s) are in a failed state: "
+  echo "  $failed_bundles"
+fi
+
+# Sleep additional 5 minutes (300 secs) to give application time to finish
+sleep 300
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
+
diff --git a/plans/sdnc/healthcheck/teardown.sh b/plans/sdnc/healthcheck/teardown.sh
new file mode 100644
index 00000000..dd465bb3
--- /dev/null
+++ b/plans/sdnc/healthcheck/teardown.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh sdnc_controller_container
+kill-instance.sh sdnc_dgbuilder_container
+kill-instance.sh sdnc_portal_container
+kill-instance.sh sdnc_db_container
+kill-instance.sh sdnc_ueblistener_container
+kill-instance.sh sdnc_dmaaplistener_container
+
+# $WORKSPACE/archives/appc deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/sdnc/healthcheck/testplan.txt b/plans/sdnc/healthcheck/testplan.txt
new file mode 100644
index 00000000..3fa8dde5
--- /dev/null
+++ b/plans/sdnc/healthcheck/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+sdnc/healthcheck
+
diff --git a/plans/so/integration-testing/setup.sh b/plans/so/integration-testing/setup.sh
new file mode 100644
index 00000000..cd0cbdc3
--- /dev/null
+++ b/plans/so/integration-testing/setup.sh
@@ -0,0 +1,38 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+#start mariadb
+docker run -d --name mariadb -h db.mso.testlab.openecomp.org -e MYSQL_ROOT_PASSWORD=password -p 3306:3306 -v ${WORKSPACE}/test/csit/scripts/mariadb/docker-entrypoint-initdb.d:/docker-entrypoint-initdb.d  -v ${WORKSPACE}/test/csit/scripts/mariadb/conf.d:/etc/mysql/conf.d nexus3.onap.org:10001/mariadb
+
+#start so
+docker run -d --name so -h mso.mso.testlab.openecomp.org -e MYSQL_ROOT_PASSWORD=password --link=mariadb:db.mso.testlab.openecomp.org -p 8080:8080 -v ${WORKSPACE}/test/csit/scripts/so/chef-config:/shared nexus3.onap.org:10001/openecomp/mso:1.1-STAGING-latest
+
+
+SO_IP=`get-instance-ip.sh so`
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${SO_IP}:1080 && break
+    echo sleep $i
+    sleep $i
+done
+
+#REPO_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' so`
+REPO_IP='127.0.0.1'
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v REPO_IP:${REPO_IP}"
diff --git a/plans/so/integration-testing/teardown.sh b/plans/so/integration-testing/teardown.sh
new file mode 100644
index 00000000..1696c745
--- /dev/null
+++ b/plans/so/integration-testing/teardown.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh mariadb
+kill-instance.sh so
diff --git a/plans/so/integration-testing/testplan.txt b/plans/so/integration-testing/testplan.txt
new file mode 100644
index 00000000..761c75c0
--- /dev/null
+++ b/plans/so/integration-testing/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+so/sanity-check/sanity_test_so.robot
\ No newline at end of file
diff --git a/plans/usecase-ui-server/testsuite/setup.sh b/plans/usecase-ui-server/testsuite/setup.sh
new file mode 100644
index 00000000..b2641bec
--- /dev/null
+++ b/plans/usecase-ui-server/testsuite/setup.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+#
+# Copyright (C) 2017 CMCC, Inc. and others. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Need some time for the initialization of MSB services
+echo sleep 60
+sleep 60
+
+# start usecase-ui-server
+docker run -d --name usecase-ui-server -v /var/lib/mysql -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/usecase-ui/usecase-ui-server
+USECASEUI_IP=`get-instance-ip.sh usecase-ui-server`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${USECASEUI_IP}:8901 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v USECASEUI_IP:${USECASEUI_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/usecase-ui-server/testsuite/teardown.sh b/plans/usecase-ui-server/testsuite/teardown.sh
new file mode 100644
index 00000000..46f5879b
--- /dev/null
+++ b/plans/usecase-ui-server/testsuite/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright (C) 2017 CMCC, Inc. and others. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh usecase-ui-server
diff --git a/plans/usecase-ui-server/testsuite/testplan.txt b/plans/usecase-ui-server/testsuite/testplan.txt
new file mode 100644
index 00000000..ec7f200a
--- /dev/null
+++ b/plans/usecase-ui-server/testsuite/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+usecase-ui/server/test.robot
diff --git a/plans/usecases/5G-bulkpm/assets/addSubscriber.json b/plans/usecases/5G-bulkpm/assets/addSubscriber.json
new file mode 100644
index 00000000..612c4626
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/assets/addSubscriber.json
@@ -0,0 +1,18 @@
+{
+    "delivery":{
+       "url":"http://fileconsumer:7070",
+       "user":"LOGIN",
+       "password":"PASSWORD",
+       "use100":true
+    },
+    "follow_redirect":false,
+    "metadataOnly":false,
+    "suspend":false,
+    "groupid":0,
+    "links":{
+       "self": "https://dmaap-dr-prov/subscribe/1",
+       "log": "https://dmaap-dr-prov/feedlog/1",
+       "feed": "https://dmaap-dr-prov/feed/1"
+    },
+    "subscriber":"admin"
+ }
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/assets/createFeed.json b/plans/usecases/5G-bulkpm/assets/createFeed.json
new file mode 100644
index 00000000..fdcc7eef
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/assets/createFeed.json
@@ -0,0 +1,18 @@
+{
+    "name": "DefaultFeed",
+    "version": "m1.0",
+    "description": "Default feed",
+    "business_description": "Default Feed",
+    "suspend": false,
+    "deleted": false,
+    "changeowner": true,
+    "authorization": {
+      "classification": "unclassified",
+      "endpoint_addrs": [],
+      "endpoint_ids": [
+        {
+          "password": "dradmin",
+          "id": "dradmin"
+        }]
+    }
+  }
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/assets/datafile_endpoints.json b/plans/usecases/5G-bulkpm/assets/datafile_endpoints.json
new file mode 100644
index 00000000..17c7078e
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/assets/datafile_endpoints.json
@@ -0,0 +1,28 @@
+{
+    "configs": {
+        "dmaap": {
+            "dmaapConsumerConfiguration": {
+                "dmaapHostName": "dmaapmrhost",
+                "dmaapPortNumber": 3904,
+                "dmaapTopicName": "/events/unauthenticated.VES_NOTIFICATION_OUTPUT",
+                "dmaapProtocol": "http",
+                "dmaapUserName": "admin",
+                "dmaapUserPassword": "admin",
+                "dmaapContentType": "application/json",
+                "consumerId": "C12",
+                "consumerGroup": "OpenDcae-c12",
+                "timeoutMS": -1,
+                "messageLimit": 1
+            },
+            "dmaapProducerConfiguration": {
+                "dmaapHostName": "dmaapdrhost",
+                "dmaapPortNumber": 8443,
+                "dmaapTopicName": "publish",
+                "dmaapProtocol": "https",
+                "dmaapUserName": "dradmin",
+                "dmaapUserPassword": "dradmin",
+                "dmaapContentType": "application/octet-stream"
+            }
+        }
+    }
+}
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/assets/xNF.pm.xml.gz b/plans/usecases/5G-bulkpm/assets/xNF.pm.xml.gz
new file mode 100644
index 00000000..2f527c27
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/assets/xNF.pm.xml.gz
diff --git a/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml b/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml
new file mode 100644
index 00000000..16db4afa
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml
@@ -0,0 +1,81 @@
+version: '2.1'
+services:
+  datarouter-prov:
+    image: nexus3.onap.org:10001/onap/dmaap/datarouter-prov
+    container_name: datarouter-prov
+    hostname: dmaap-dr-prov
+    ports:
+     - "443:8443"
+     - "8443:8443"
+     - "8080:8080"
+    volumes:
+     - ./prov_data/provserver.properties:/opt/app/datartr/etc/provserver.properties
+     - ./prov_data/addSubscriber.txt:/opt/app/datartr/addSubscriber.txt
+     - ./prov_data/addFeed3.txt:/opt/app/datartr/addFeed3.txt
+    depends_on:
+      mariadb_container:
+        condition: service_healthy
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://dmaap-dr-prov:8080/internal/prov"]
+      interval: 10s
+      timeout: 10s
+      retries: 5
+
+  datarouter-node:
+    image: nexus3.onap.org:10001/onap/dmaap/datarouter-node
+    container_name: datarouter-node
+    hostname: dmaap-dr-node
+    ports:
+     - "9443:8443"
+     - "9090:8080"
+    volumes:
+     - ./node_data/node.properties:/opt/app/datartr/etc/node.properties
+    depends_on:
+      datarouter-prov:
+        condition: service_healthy
+
+  datarouter-subscriber:
+      image: nexus3.onap.org:10001/onap/dmaap/datarouter-subscriber
+      container_name: fileconsumer-node
+      hostname: subscriber.com
+      ports:
+       - "7070:7070"
+      volumes:
+       - ./subscriber_data/subscriber.properties:/opt/app/subscriber/etc/subscriber.properties
+
+  mariadb_container:
+    image: mariadb:10.2.14
+    container_name: mariadb
+    ports:
+      - "3306:3306"
+    environment:
+      MYSQL_ROOT_PASSWORD: datarouter
+      MYSQL_DATABASE: datarouter
+      MYSQL_USER: datarouter
+      MYSQL_PASSWORD: datarouter
+    healthcheck:
+      test: ["CMD", "mysqladmin" ,"ping", "-h", "localhost", "--silent"]
+      interval: 10s
+      timeout: 30s
+      retries: 5
+
+  sftp:
+    container_name: sftp
+    image: atmoz/sftp
+    ports:
+      - "2222:22"
+    volumes:
+      - /host/upload:/home/admin
+    command: admin:admin:1001
+
+  dfc:
+    container_name: dfc
+    image: quay.io/martin_yan_seu/datafile
+    ports:
+      - "8433:8433"
+
+  ves:
+    container_name: vescollector
+    image: nexus3.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.3.1
+    environment:
+       DMAAPHOST:
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/setup.sh b/plans/usecases/5G-bulkpm/setup.sh
new file mode 100644
index 00000000..f27bfba5
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/setup.sh
@@ -0,0 +1,141 @@
+#!/bin/bash
+# Place the scripts in run order:
+source ${SCRIPTS}/common_functions.sh
+
+# Clone DMaaP Message Router repo
+mkdir -p $WORKSPACE/archives/dmaapmr
+cd $WORKSPACE/archives/dmaapmr
+git clone --depth 1 http://gerrit.onap.org/r/dmaap/messagerouter/messageservice -b master
+git pull
+cd $WORKSPACE/archives/dmaapmr/messageservice/src/main/resources/docker-compose
+cp $WORKSPACE/archives/dmaapmr/messageservice/bundleconfig-local/etc/appprops/MsgRtrApi.properties /var/tmp/
+
+# start DMaaP MR containers with docker compose and configuration from docker-compose.yml
+docker login -u docker -p docker nexus3.onap.org:10001
+docker-compose up -d
+
+ZOOKEEPER=$(docker ps -a -q --filter="name=zookeeper_1")
+KAFKA=$(docker ps -a -q --filter="name=kafka_1")
+DMAAP=$(docker ps -a -q --filter="name=dmaap_1")
+
+# Wait for initialization of Docker contaienr for DMaaP MR, Kafka and Zookeeper
+for i in {1..50}; do
+if [ $(docker inspect --format '{{ .State.Running }}' $KAFKA) ] && \
+[ $(docker inspect --format '{{ .State.Running }}' $ZOOKEEPER) ] && \
+[ $(docker inspect --format '{{ .State.Running }}' $DMAAP) ]
+then
+   echo "DMaaP Service Running"
+   break
+else
+   echo sleep $i
+   sleep $i
+fi
+done
+
+# Get IP address of DMAAP, KAFKA, Zookeeper
+KAFKA_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $KAFKA)
+ZOOKEEPER_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $ZOOKEEPER)
+DMAAP_MR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $DMAAP)
+
+sleep 2
+# Shutdown DMAAP Container
+docker kill $DMAAP
+
+# Initial docker-compose up and down is for populating kafka and zookeeper IPs in /var/tmp/MsgRtrApi.properites
+sed -i -e '/config.zk.servers=/ s/=.*/='$ZOOKEEPER_IP'/' /var/tmp/MsgRtrApi.properties
+sed -i -e '/kafka.metadata.broker.list=/ s/=.*/='$KAFKA_IP':9092/' /var/tmp/MsgRtrApi.properties
+
+# Start DMaaP MR containers with docker compose and configuration from docker-compose.yml
+docker login -u docker -p docker nexus3.onap.org:10001
+docker-compose up -d
+sleep 5
+
+# Clone DMaaP Data Router repo
+mkdir -p $WORKSPACE/archives/dmaapdr
+cd $WORKSPACE/archives/dmaapdr
+git clone --depth 1 https://gerrit.onap.org/r/dmaap/datarouter -b master
+cd datarouter
+cd $WORKSPACE/archives/dmaapdr/datarouter/docker-compose/
+rm -rf docker-compose.yml
+cp $WORKSPACE/test/csit/plans/usecases/5G-bulkpm/composefile/docker-compose-e2e.yml $WORKSPACE/archives/dmaapdr/datarouter/docker-compose/docker-compose.yml
+docker login -u docker -p docker nexus3.onap.org:10001
+docker-compose up -d
+docker kill datarouter-prov
+docker kill datarouter-node
+docker kill vescollector
+HOST_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+sed -i -e '/DMAAPHOST:/ s/:.*/: '$HOST_IP'/' docker-compose.yml
+MARIADB=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' mariadb )
+sed -i 's/172.100.0.2/'$MARIADB'/g' $WORKSPACE/archives/dmaapdr/datarouter/docker-compose/prov_data/provserver.properties
+docker-compose up -d
+
+# Wait for initialization of Docker container for datarouter-node, datarouter-prov and mariadb
+for i in {1..50}; do
+    if [ $(docker inspect --format '{{ .State.Running }}' datarouter-node) ] && \
+        [ $(docker inspect --format '{{ .State.Running }}' datarouter-prov) ] && \
+        [ $(docker inspect --format '{{ .State.Running }}' mariadb) ]
+    then
+        echo "DR Service Running"
+        break
+    else
+        echo sleep $i
+        sleep $i
+    fi
+done
+
+sleep 5
+
+# Get IP address of datarrouger-prov, datarouter-node, fileconsumer-node.
+DR_PROV_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-prov)
+DR_NODE_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' datarouter-node)
+DR_SUBSCIBER_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' fileconsumer-node)
+DR_GATEWAY_IP=$(docker inspect -f '{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}' datarouter-prov)
+
+echo DR_PROV_IP=${DR_PROV_IP}
+echo DR_NODE_IP=${DR_NODE_IP}
+echo DR_GATEWAY_IP=${DR_GATEWAY_IP}
+echo DR_SUBSCIBER_IP=${DR_SUBSCIBER_IP}
+
+docker exec -i datarouter-prov sh -c "curl -k  -X PUT https://$DR_PROV_IP:8443/internal/api/NODES?val=dmaap-dr-node\|$DR_GATEWAY_IP"
+docker exec -i datarouter-prov sh -c "curl -k  -X PUT https://$DR_PROV_IP:8443/internal/api/PROV_AUTH_ADDRESSES?val=dmaap-dr-prov\|$DR_GATEWAY_IP"
+docker exec datarouter-prov /bin/sh -c "echo '${DR_NODE_IP}' dmaap-dr-node >> /etc/hosts"
+docker exec datarouter-node /bin/sh -c "echo '${DR_PROV_IP}' dmaap-dr-prov >> /etc/hosts"
+docker exec datarouter-node /bin/sh -c "echo '${DR_SUBSCIBER_IP}' dmaap-dr-subscriber >> /etc/hosts"
+
+# Get IP address of DMAAP, KAFKA, Zookeeper
+DMAAP_MR_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $DMAAP)
+KAFKA_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $KAFKA)
+ZOOKEEPER_IP=$(docker inspect --format='{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $ZOOKEEPER)
+VESC_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' vescollector)
+SFTP_IP=$(docker inspect '--format={{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' sftp)
+
+export VESC_IP=${VESC_IP}
+export HOST_IP=${HOST_IP}
+export DMAAP_MR_IP=${DMAAP_MR_IP}
+
+#Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v DR_PROV_IP:${DR_PROV_IP} -v DR_NODE_IP:${DR_NODE_IP} -v DMAAP_MR_IP:${DMAAP_MR_IP} -v VESC_IP:${VESC_IP} -v DR_SUBSCIBER_IP:${DR_SUBSCIBER_IP}"
+
+pip install jsonschema uuid
+# Wait container ready
+sleep 2
+
+# Data File Collector configuration :
+cp $WORKSPACE/test/csit/plans/usecases/5G-bulkpm/assets/datafile_endpoints.json /tmp/
+sed -i 's/dmaapmrhost/'${DMAAP_MR_IP}'/g' /tmp/datafile_endpoints.json
+sed -i 's/dmaapdrhost/'${DR_PROV_IP}'/g' /tmp/datafile_endpoints.json
+docker cp /tmp/datafile_endpoints.json dfc:/config/
+docker restart dfc
+
+# SFTP Configuration:
+# Update the File Ready Notification with actual sftp ip address and copy pm files to sftp server.
+cp $WORKSPACE/test/csit/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotification.json $WORKSPACE/test/csit/tests/usecases/5G-bulkpm-bulkpm/testcases/assets/json_events/FileExistNotificationUpdated.json
+sed -i 's/sftpserver/'${SFTP_IP}'/g' $WORKSPACE/test/csit/tests/usecases/5G-bulkpm/assets/json_events/FileExistNotificationUpdated.json
+docker cp $WORKSPACE/test/csit/plans/usecases/5G-bulkpm/assets/xNF.pm.xml.gz sftp:/home/admin/
+
+# Data Router Configuration:
+# Create default feed and create file consumer subscriber on data router
+curl -v -X POST -H "Content-Type:application/vnd.att-dr.feed" -H "X-ATT-DR-ON-BEHALF-OF:dradmin" --data-ascii @$WORKSPACE/test/csit/plans/usecases/5G-bulkpm/assets/createFeed.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443
+cp $WORKSPACE/test/csit/plans/usecases/5G-bulkpm/assets/addSubscriber.json /tmp/addSubscriber.json
+sed -i 's/fileconsumer/'${DR_SUBSCIBER_IP}'/g' /tmp/addSubscriber.json
+curl -v -X POST -H "Content-Type:application/vnd.att-dr.subscription" -H "X-ATT-DR-ON-BEHALF-OF:dradmin" --data-ascii @/tmp/addSubscriber.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443/subscribe/1ii @/tmp/addSubscriber.json --post301 --location-trusted -k https://${DR_PROV_IP}:8443/subscribe/1
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/teardown.sh b/plans/usecases/5G-bulkpm/teardown.sh
new file mode 100644
index 00000000..c55f4398
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/teardown.sh
@@ -0,0 +1,12 @@
+#!/bin/bash
+echo "Starting teardown script"
+kill-instance.sh $DMAAP
+kill-instance.sh $KAFKA
+kill-instance.sh $ZOOKEEPER
+kill-instance.sh vescollector
+kill-instance.sh datarouter-node
+kill-instance.sh datarouter-prov
+kill-instance.sh fileconsumer-node
+kill-instance.sh mariadb
+kill-instance.sh dfc
+kill-instance.sh sftp
\ No newline at end of file
diff --git a/plans/usecases/5G-bulkpm/testplan.txt b/plans/usecases/5G-bulkpm/testplan.txt
new file mode 100644
index 00000000..c4e1c427
--- /dev/null
+++ b/plans/usecases/5G-bulkpm/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+usecases/5G-bulkpm
diff --git a/plans/vfc-gvnfm-vnflcm/sanity-check/setup.sh b/plans/vfc-gvnfm-vnflcm/sanity-check/setup.sh
new file mode 100755
index 00000000..f82f228a
--- /dev/null
+++ b/plans/vfc-gvnfm-vnflcm/sanity-check/setup.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+docker run -d -p 3306:3306 --name vfc-db -v /var/lib/mysql nexus3.onap.org:10001/onap/vfc/db
+VFC_DB_IP=`get-instance-ip.sh vfc-db`
+echo VFC_DB_IP=${VFC_DB_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Wait for initialization(3306 DB)
+for i in {1..3}; do
+    curl -sS -m 1 ${VFC_DB_IP}:3306 && break
+    echo sleep $i
+    sleep $i
+done
+
+# wait for container initalization
+echo sleep 30
+sleep 30
+
+# start vfc-vnflcm
+docker run -d --name vfc-vnflcm -e MSB_ADDR=${MSB_IAG_IP}:80 -e MYSQL_ADDR=${VFC_DB_IP}:3306 nexus3.onap.org:10001/onap/vfc/vnflcm
+VNFLCM_IP=`get-instance-ip.sh vfc-vnflcm`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${VNFLCM_IP}:8801 && break
+    echo sleep $i
+    sleep $i
+done
+
+docker cp vfc-vnflcm:/service/vfc/gvnfm/vnflcm/lcm/lcm/pub/config/config.py ./
+cat config.py
+
+docker cp vfc-vnflcm:/service/vfc/gvnfm/vnflcm/lcm/logs/runtime_lcm.log ./
+cat runtime_lcm.log
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v VNFLCM_IP:${VNFLCM_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/vfc-gvnfm-vnflcm/sanity-check/teardown.sh b/plans/vfc-gvnfm-vnflcm/sanity-check/teardown.sh
new file mode 100755
index 00000000..aebb2523
--- /dev/null
+++ b/plans/vfc-gvnfm-vnflcm/sanity-check/teardown.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-db
+kill-instance.sh vfc-vnflcm
diff --git a/plans/vfc-gvnfm-vnflcm/sanity-check/testplan.txt b/plans/vfc-gvnfm-vnflcm/sanity-check/testplan.txt
new file mode 100644
index 00000000..0aa2e3e2
--- /dev/null
+++ b/plans/vfc-gvnfm-vnflcm/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/gvnfm-vnflcm/test.robot
diff --git a/plans/vfc-gvnfm-vnfmgr/sanity-check/setup.sh b/plans/vfc-gvnfm-vnfmgr/sanity-check/setup.sh
new file mode 100755
index 00000000..3c985aaf
--- /dev/null
+++ b/plans/vfc-gvnfm-vnfmgr/sanity-check/setup.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+docker run -d -p 3306:3306 --name vfc-db nexus3.onap.org:10001/onap/vfc/db
+VFC_DB_IP=`get-instance-ip.sh vfc-db`
+echo VFC_DB_IP=${VFC_DB_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Wait for initialization(3306 DB)
+for i in {1..3}; do
+    curl -sS -m 1 ${VFC_DB_IP}:3306 && break
+    echo sleep $i
+    sleep $i
+done
+
+# wait for container initalization
+echo sleep 30
+sleep 30
+
+# start vfc-vnfmgr
+docker run -d --name vfc-vnfmgr -e MSB_ADDR=${MSB_IAG_IP}:80 -e MYSQL_ADDR=${VFC_DB_IP}:3306 nexus3.onap.org:10001/onap/vfc/vnfmgr
+VNFMGR_IP=`get-instance-ip.sh vfc-vnfmgr`
+for i in {1..10}; do
+    curl -sS -m 1 ${VNFMGR_IP}:8803 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v VNFMGR_IP:${VNFMGR_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/vfc-gvnfm-vnfmgr/sanity-check/teardown.sh b/plans/vfc-gvnfm-vnfmgr/sanity-check/teardown.sh
new file mode 100755
index 00000000..cfabe42d
--- /dev/null
+++ b/plans/vfc-gvnfm-vnfmgr/sanity-check/teardown.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-db
+kill-instance.sh vfc-vnfmgr
diff --git a/plans/vfc-gvnfm-vnfmgr/sanity-check/testplan.txt b/plans/vfc-gvnfm-vnfmgr/sanity-check/testplan.txt
new file mode 100644
index 00000000..960f7325
--- /dev/null
+++ b/plans/vfc-gvnfm-vnfmgr/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/gvnfm-vnfmgr/test.robot
diff --git a/plans/vfc-gvnfm-vnfres/sanity-check/setup.sh b/plans/vfc-gvnfm-vnfres/sanity-check/setup.sh
new file mode 100755
index 00000000..a0ea986d
--- /dev/null
+++ b/plans/vfc-gvnfm-vnfres/sanity-check/setup.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo MSB_DISCOVERY_IP=${MSB_DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+docker run -d -p 3306:3306 --name vfc-db nexus3.onap.org:10001/onap/vfc/db
+VFC_DB_IP=`get-instance-ip.sh vfc-db`
+echo VFC_DB_IP=${VFC_DB_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Wait for initialization(3306 DB)
+for i in {1..3}; do
+    curl -sS -m 1 ${VFC_DB_IP}:3306 && break
+    echo sleep $i
+    sleep $i
+done
+
+# wait for container initalization
+echo sleep 60
+sleep 60
+# start vfc-vnfres
+docker run -d --name vfc-vnfres -e MSB_ADDR=${MSB_IAG_IP}:80 -e MYSQL_ADDR=${VFC_DB_IP}:3306 nexus3.onap.org:10001/onap/vfc/vnfres
+VNFRES_IP=`get-instance-ip.sh vfc-vnfres`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${VNFRES_IP}:8802 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v VNFRES_IP:${VNFRES_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/vfc-gvnfm-vnfres/sanity-check/teardown.sh b/plans/vfc-gvnfm-vnfres/sanity-check/teardown.sh
new file mode 100755
index 00000000..09db55b5
--- /dev/null
+++ b/plans/vfc-gvnfm-vnfres/sanity-check/teardown.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-db
+kill-instance.sh vfc-vnfres
diff --git a/plans/vfc-gvnfm-vnfres/sanity-check/testplan.txt b/plans/vfc-gvnfm-vnfres/sanity-check/testplan.txt
new file mode 100644
index 00000000..e94e2946
--- /dev/null
+++ b/plans/vfc-gvnfm-vnfres/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/gvnfm-vnfres/test.robot
diff --git a/plans/vfc-nfvo-catalog/sanity-check/setup.sh b/plans/vfc-nfvo-catalog/sanity-check/setup.sh
new file mode 100644
index 00000000..d839fa55
--- /dev/null
+++ b/plans/vfc-nfvo-catalog/sanity-check/setup.sh
@@ -0,0 +1,68 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+#login to the onap nexus docker repo
+docker login -u docker -p docker nexus3.onap.org:10001
+
+# start msb
+docker run -d -p 8500:8500 --name msb_consul consul:0.9.3
+CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo CONSUL_IP=${CONSUL_IP}
+
+docker run -d -p 10081:10081 -e CONSUL_IP=$CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$CONSUL_IP -e SDCLIENT_IP=$DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IP==`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IP=${MSB_IP}
+
+docker run -d -p 3306:3306 --name vfc-db -v /var/lib/mysql nexus3.onap.org:10001/onap/vfc/db
+VFC_DB_IP=`get-instance-ip.sh vfc-db`
+echo VFC_DB_IP=${VFC_DB_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${CONSUL_IP}:8500 && curl -sS -m 1 ${DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Wait for initialization(3306 DB)
+for i in {1..3}; do
+    curl -sS -m 1 ${VFC_DB_IP}:3306 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Need some time so service info can be synced from discovery to api gateway
+echo sleep 60
+sleep 60
+
+# start vfc-catalog
+docker run -d --name vfc-catalog -v /var/lib/mysql -e MSB_ADDR=${DISCOVERY_IP}:10081 -e MYSQL_ADDR=${VFC_DB_IP}:3306 nexus3.onap.org:10001/onap/vfc/catalog
+CATALOG_IP=`get-instance-ip.sh vfc-catalog`
+for i in {1..10}; do
+    curl -sS -m 1 ${CATALOG_IP}:8806 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IP:${MSB_IP} -v CATALOG_IP:${CATALOG_IP} -v MSB_DISCOVERY_IP:${DISCOVERY_IP}"
diff --git a/plans/vfc-nfvo-catalog/sanity-check/teardown.sh b/plans/vfc-nfvo-catalog/sanity-check/teardown.sh
new file mode 100644
index 00000000..d498e34c
--- /dev/null
+++ b/plans/vfc-nfvo-catalog/sanity-check/teardown.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-db
+kill-instance.sh vfc-catalog
diff --git a/plans/vfc-nfvo-catalog/sanity-check/testplan.txt b/plans/vfc-nfvo-catalog/sanity-check/testplan.txt
new file mode 100644
index 00000000..6c8c54a9
--- /dev/null
+++ b/plans/vfc-nfvo-catalog/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/nfvo-catalog/test.robot
diff --git a/plans/vfc-nfvo-driver-ems/sanity-check/setup.sh b/plans/vfc-nfvo-driver-ems/sanity-check/setup.sh
new file mode 100755
index 00000000..d381f8f3
--- /dev/null
+++ b/plans/vfc-nfvo-driver-ems/sanity-check/setup.sh
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Need some time so service info can be synced from discovery to api gateway
+echo sleep 60
+sleep 60
+
+# start vfc-emsdriver
+docker run -d --name vfc-emsdriver -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/vfc/emsdriver
+EMS_DRV_IP=`get-instance-ip.sh vfc-emsdriver`
+docker logs -f vfc-emsdriver > emsdriver.log &
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${EMS_DRV_IP}:8206 && break
+    echo sleep $i
+    sleep $i
+done
+
+echo "==============="
+cat emsdriver.log
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v EMS_DRV_IP:${EMS_DRV_IP}"
diff --git a/plans/vfc-nfvo-driver-ems/sanity-check/teardown.sh b/plans/vfc-nfvo-driver-ems/sanity-check/teardown.sh
new file mode 100755
index 00000000..aa676b2f
--- /dev/null
+++ b/plans/vfc-nfvo-driver-ems/sanity-check/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-emsdriver
diff --git a/plans/vfc-nfvo-driver-ems/sanity-check/testplan.txt b/plans/vfc-nfvo-driver-ems/sanity-check/testplan.txt
new file mode 100644
index 00000000..747f8683
--- /dev/null
+++ b/plans/vfc-nfvo-driver-ems/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/nfvo-driver-ems/test.robot
diff --git a/plans/vfc-nfvo-driver-sfc/sanity-check/setup.sh b/plans/vfc-nfvo-driver-sfc/sanity-check/setup.sh
new file mode 100755
index 00000000..85a3e69f
--- /dev/null
+++ b/plans/vfc-nfvo-driver-sfc/sanity-check/setup.sh
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Need some time so service info can be synced from discovery to api gateway
+echo sleep 60
+sleep 60
+
+# start vfc-ztesdncdriver
+docker run -d --name vfc-ztesdncdriver -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/vfc/ztesdncdriver
+SFC_DRV_IP=`get-instance-ip.sh vfc-ztesdncdriver`
+docker logs -f vfc-ztesdncdriver > ztesdncdriver.log &
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${SFC_DRV_IP}:8411 && break
+    echo sleep $i
+    sleep $i
+done
+
+echo "==============================="
+cat ztesdncdriver.log
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v SFC_DRV_IP:${SFC_DRV_IP}"
diff --git a/plans/vfc-nfvo-driver-sfc/sanity-check/teardown.sh b/plans/vfc-nfvo-driver-sfc/sanity-check/teardown.sh
new file mode 100755
index 00000000..ce5402ef
--- /dev/null
+++ b/plans/vfc-nfvo-driver-sfc/sanity-check/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-ztesdncdriver
diff --git a/plans/vfc-nfvo-driver-sfc/sanity-check/testplan.txt b/plans/vfc-nfvo-driver-sfc/sanity-check/testplan.txt
new file mode 100644
index 00000000..9de2acce
--- /dev/null
+++ b/plans/vfc-nfvo-driver-sfc/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/nfvo-driver-sfc/test.robot
diff --git a/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/setup.sh b/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/setup.sh
new file mode 100644
index 00000000..bdc66d0e
--- /dev/null
+++ b/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/setup.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo MSB_DISCOVERY_IP=${MSB_DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# wait for container initalization
+echo sleep 60
+sleep 60
+# start vfc-gvnfmdriver
+docker run -d --name vfc-gvnfmdriver -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/vfc/gvnfmdriver
+GVNFMDRIVER_IP=`get-instance-ip.sh vfc-gvnfmdriver`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${GVNFMDRIVER_IP}:8484 && break
+    echo sleep $i
+    sleep $i
+done
+
+# start vfc-jujudriver
+docker run -d --name vfc-jujudriver -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/vfc/jujudriver
+JUJUDRIVER_IP=`get-instance-ip.sh vfc-jujudriver`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${JUJUDRIVER_IP}:8483 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v GVNFMDRIVER_IP:${GVNFMDRIVER_IP} -v JUJUDRIVER_IP:${JUJUDRIVER_IP}"
diff --git a/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/teardown.sh b/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/teardown.sh
new file mode 100644
index 00000000..78d7c5ad
--- /dev/null
+++ b/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/teardown.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh  vfc-gvnfmdriver
+
+kill-instance.sh vfc-jujudriver
diff --git a/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/testplan.txt b/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/testplan.txt
new file mode 100644
index 00000000..e7bee519
--- /dev/null
+++ b/plans/vfc-nfvo-driver-vnfm-gvnfm/sanity-check/testplan.txt
@@ -0,0 +1,6 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+
+vfc/nfvo-driver-gvnfm/gvnfmdriver.robot
+
+vfc/nfvo-driver-gvnfm/jujudriver.robot
diff --git a/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/setup.sh b/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/setup.sh
new file mode 100644
index 00000000..047c067e
--- /dev/null
+++ b/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/setup.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo MSB_DISCOVERY_IP=${MSB_DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# wait for container initalization
+echo sleep 60
+sleep 60
+
+# start vfc-ztevnfmdriver
+docker run -d --name vfc-ztevnfmdriver -p 8410:8410 -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/vfc/ztevnfmdriver
+ZTEVNFMDRIVER_IP=`get-instance-ip.sh vfc-ztevnfmdriver`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${ZTEVNFMDRIVER_IP}:8410 && break
+    echo sleep $i
+    sleep $i
+done
+
+
+# Start svnfm-huawei
+docker run -d --name vfc-svnfm-huawei -p 8482:8482 -p 8443:8443 -e MSB_ADDR=${MSB_IAG_IP}:80 nexus3.onap.org:10001/onap/vfc/nfvo/svnfm/huawei
+SERVICE_IP=`get-instance-ip.sh vfc-svnfm-huawei`
+for i in {1..20}; do
+    curl -sS ${SERVICE_IP}:8482 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v ZTEVNFMDRIVER_IP:${ZTEVNFMDRIVER_IP} -v MSB_IP:${MSB_IAG_IP} -v SERVICE_IP:${SERVICE_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/teardown.sh b/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/teardown.sh
new file mode 100644
index 00000000..a7909581
--- /dev/null
+++ b/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/teardown.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh  vfc-ztevnfmdriver
+
+kill-instance.sh vfc-svnfm-huawei
diff --git a/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/testplan.txt b/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/testplan.txt
new file mode 100644
index 00000000..7eb861ed
--- /dev/null
+++ b/plans/vfc-nfvo-driver-vnfm-svnfm/sanity-check/testplan.txt
@@ -0,0 +1,6 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+
+vfc/nfvo-driver-svnfm/ztevmanager.robot
+
+vfc/nfvo-driver-svnfm/huawei.robot
diff --git a/plans/vfc-nfvo-lcm/sanity-check/setup.sh b/plans/vfc-nfvo-lcm/sanity-check/setup.sh
new file mode 100755
index 00000000..7a739bad
--- /dev/null
+++ b/plans/vfc-nfvo-lcm/sanity-check/setup.sh
@@ -0,0 +1,85 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${MSB_DISCOVERY_IP}
+
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP -e "ROUTE_LABELS=visualRange:1" --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+docker run -d -p 3306:3306 --name vfc-db -v /var/lib/mysql nexus3.onap.org:10001/onap/vfc/db
+VFC_DB_IP=`get-instance-ip.sh vfc-db`
+echo VFC_DB_IP=${VFC_DB_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Wait for initialization(3306 DB)
+for i in {1..3}; do
+    curl -sS -m 1 ${VFC_DB_IP}:3306 && break
+    echo sleep $i
+    sleep $i
+done
+
+docker ps > 1.txt
+cat 1.txt
+echo "****************************"
+docker logs -f vfc-db > 2.txt &
+cat 2.txt
+
+# Need some time so service info can be synced from discovery to api gateway
+echo sleep 60
+sleep 60
+
+# start vfc-nslcm
+docker run -d --name vfc-nslcm -v /var/lib/mysql -e MSB_ADDR=${MSB_IAG_IP}:80 -e MYSQL_ADDR=${VFC_DB_IP}:3306 nexus3.onap.org:10001/onap/vfc/nslcm
+NSLCM_IP=`get-instance-ip.sh vfc-nslcm`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS -m 1 ${NSLCM_IP}:8403 && break
+    echo sleep $i
+    sleep $i
+done
+
+curl http://${NSLCM_IP}:8403/api/nslcm/v1/swagger.json
+
+docker logs -f vfc-nslcm > 3.txt &
+cat 3.txt
+
+docker cp vfc-nslcm:/service/vfc/nfvo/lcm/logs/runtime_lcm.log ./
+cat runtime_lcm.log
+
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v NSLCM_IP:${NSLCM_IP} -v SCRIPTS:${SCRIPTS}"
diff --git a/plans/vfc-nfvo-lcm/sanity-check/teardown.sh b/plans/vfc-nfvo-lcm/sanity-check/teardown.sh
new file mode 100755
index 00000000..6ddf7557
--- /dev/null
+++ b/plans/vfc-nfvo-lcm/sanity-check/teardown.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-db
+kill-instance.sh vfc-nslcm
diff --git a/plans/vfc-nfvo-lcm/sanity-check/testplan.txt b/plans/vfc-nfvo-lcm/sanity-check/testplan.txt
new file mode 100644
index 00000000..fc261e13
--- /dev/null
+++ b/plans/vfc-nfvo-lcm/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/nfvo-lcm/test.robot
diff --git a/plans/vfc-nfvo-multivimproxy/sanity-check/setup.sh b/plans/vfc-nfvo-multivimproxy/sanity-check/setup.sh
new file mode 100644
index 00000000..4d97f33e
--- /dev/null
+++ b/plans/vfc-nfvo-multivimproxy/sanity-check/setup.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+#
+# Copyright 2018 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+#login to the onap nexus docker repo
+docker login -u docker -p docker nexus3.onap.org:10001
+
+# Start MSB
+docker run -d -p 8500:8500 --name msb_consul consul:0.9.3
+CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo CONSUL_IP=${CONSUL_IP}
+docker run -d -p 10081:10081 -e CONSUL_IP=$CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$CONSUL_IP -e SDCLIENT_IP=$DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IP==`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IP=${MSB_IP}
+
+# Start resmgr
+docker run -d --name vfc-multivimproxy -e MSB_ADDR=${MSB_IP}:80 nexus3.onap.org:10001/onap/vfc/multivimproxy
+RESMGR_IP=`get-instance-ip.sh vfc-multivimproxy`
+for i in {1..20}; do
+    curl -sS ${RESMGR_IP}:8486 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IP:${MSB_IP} -v RESMGR_IP:${RESMGR_IP}"
diff --git a/plans/vfc-nfvo-multivimproxy/sanity-check/teardown.sh b/plans/vfc-nfvo-multivimproxy/sanity-check/teardown.sh
new file mode 100644
index 00000000..c158d199
--- /dev/null
+++ b/plans/vfc-nfvo-multivimproxy/sanity-check/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2018 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-multivimproxy
diff --git a/plans/vfc-nfvo-multivimproxy/sanity-check/testplan.txt b/plans/vfc-nfvo-multivimproxy/sanity-check/testplan.txt
new file mode 100644
index 00000000..f81be8ec
--- /dev/null
+++ b/plans/vfc-nfvo-multivimproxy/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/nfvo-multivimproxy/test.robot
\ No newline at end of file
diff --git a/plans/vfc-nfvo-resmanagement/sanity-check/setup.sh b/plans/vfc-nfvo-resmanagement/sanity-check/setup.sh
new file mode 100644
index 00000000..68b78431
--- /dev/null
+++ b/plans/vfc-nfvo-resmanagement/sanity-check/setup.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+#login to the onap nexus docker repo
+docker login -u docker -p docker nexus3.onap.org:10001
+
+# Start MSB
+docker run -d -p 8500:8500 --name msb_consul consul:0.9.3
+CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo CONSUL_IP=${CONSUL_IP}
+docker run -d -p 10081:10081 -e CONSUL_IP=$CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery
+DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo DISCOVERY_IP=${DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$CONSUL_IP -e SDCLIENT_IP=$DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway
+MSB_IP==`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IP=${MSB_IP}
+
+# Start resmgr
+docker run -d --name vfc-resmanagement -e MSB_ADDR=${MSB_IP}:80 nexus3.onap.org:10001/onap/vfc/resmanagement
+RESMGR_IP=`get-instance-ip.sh vfc-resmanagement`
+for i in {1..20}; do
+    curl -sS ${RESMGR_IP}:8480 && break
+    echo sleep $i
+    sleep $i
+done
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IP:${MSB_IP} -v RESMGR_IP:${RESMGR_IP}"
diff --git a/plans/vfc-nfvo-resmanagement/sanity-check/teardown.sh b/plans/vfc-nfvo-resmanagement/sanity-check/teardown.sh
new file mode 100644
index 00000000..2ad95c6b
--- /dev/null
+++ b/plans/vfc-nfvo-resmanagement/sanity-check/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc-resmanagement
diff --git a/plans/vfc-nfvo-resmanagement/sanity-check/testplan.txt b/plans/vfc-nfvo-resmanagement/sanity-check/testplan.txt
new file mode 100644
index 00000000..98dac63b
--- /dev/null
+++ b/plans/vfc-nfvo-resmanagement/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vfc/nfvo-resmanagement/test.robot
\ No newline at end of file
diff --git a/plans/vfc-nfvo-wfengine/sanity-check/setup.sh b/plans/vfc-nfvo-wfengine/sanity-check/setup.sh
new file mode 100644
index 00000000..e7c755fa
--- /dev/null
+++ b/plans/vfc-nfvo-wfengine/sanity-check/setup.sh
@@ -0,0 +1,91 @@
+#!/bin/bash
+#
+# Copyright 2017 ZTE Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Place the scripts in run order:
+# Start all process required for executing test case
+
+source ${SCRIPTS}/common_functions.sh
+
+
+#start msb
+docker run -d -p 8500:8500  --name msb_consul consul:0.9.3
+MSB_CONSUL_IP=`get-instance-ip.sh msb_consul`
+echo MSB_CONSUL_IP=${MSB_CONSUL_IP}
+docker run -d  -p 10081:10081  -e CONSUL_IP=$MSB_CONSUL_IP --name msb_discovery nexus3.onap.org:10001/onap/msb/msb_discovery:1.1.0
+MSB_DISCOVERY_IP=`get-instance-ip.sh msb_discovery`
+echo MSB_DISCOVERY_IP=${MSB_DISCOVERY_IP}
+docker run -d -p 80:80 -e CONSUL_IP=$MSB_CONSUL_IP -e SDCLIENT_IP=$MSB_DISCOVERY_IP --name msb_internal_apigateway nexus3.onap.org:10001/onap/msb/msb_apigateway:1.1.0
+MSB_IAG_IP=`get-instance-ip.sh msb_internal_apigateway`
+echo MSB_IAG_IP=${MSB_IAG_IP}
+
+# Wait for initialization(8500 Consul, 10081 Service Registration & Discovery, 80 api gateway)
+for i in {1..10}; do
+    curl -sS -m 1 ${MSB_CONSUL_IP}:8500 && curl -sS -m 1 ${MSB_DISCOVERY_IP}:10081 && curl -sS -m 1 ${MSB_IAG_IP}:80 && break
+    echo sleep $i
+    sleep $i
+done
+
+# wait for container initalization
+echo sleep 30
+sleep 30
+
+ORG="onap"
+PROJECT="vfc"
+DOCKER_REPOSITORY="nexus3.onap.org:10001"
+IMAGE="wfengine-activiti"
+IMAGE_ACTIVITI_NAME="${DOCKER_REPOSITORY}/${ORG}/${PROJECT}/${IMAGE}"
+
+#get current host IP addres
+SERVICE_IP=$(ip route get 8.8.8.8 | awk '/8.8.8.8/ {print $NF}')
+
+# start wfengine-activiti
+# docker run -d --name vfc_wfengine_activiti -p 8804:8080 -e SERVICE_IP=$SERVICE_IP -e SERVICE_PORT=8804 -e OPENPALETTE_MSB_IP=${MSB_IAG_IP} -e OPENPALETTE_MSB_PORT=80 ${IMAGE_ACTIVITI_NAME}
+docker run -d --name vfc_wfengine_activiti -p 8804:8080 -e SERVICE_PORT=8080 -e OPENPALETTE_MSB_IP=${MSB_IAG_IP} -e OPENPALETTE_MSB_PORT=80 ${IMAGE_ACTIVITI_NAME}
+WFENGINE_ACTIVITI_IP=`get-instance-ip.sh vfc_wfengine_activiti`
+
+# Wait for initialization
+for i in {1..10}; do
+    curl -sS ${WFENGINE_ACTIVITI_IP}:8080 && break
+    echo sleep $i
+    sleep $i
+done
+for i in {1..10}; do
+    curl -sS ${SERVICE_IP}:8804 && break
+    echo sleep $i
+    sleep $i
+done
+docker logs vfc_wfengine_activiti
+
+IMAGE="wfengine-mgrservice"
+IMAGE_MGRSERVICE_NAME="${DOCKER_REPOSITORY}/${ORG}/${PROJECT}/${IMAGE}"
+
+# Start wfengine-mgrservice
+#docker run -d --name vfc_wfengine_mgrservice -p 8805:10550 -e SERVICE_IP=$SERVICE_IP -e SERVICE_PORT=8805 -e OPENPALETTE_MSB_IP=${MSB_IAG_IP} -e OPENPALETTE_MSB_PORT=80 ${IMAGE_MGRSERVICE_NAME}
+#docker run -d --name vfc_wfengine_mgrservice -p 8805:10550 -e SERVICE_PORT=10550 -e OPENPALETTE_MSB_IP=${MSB_IAG_IP} -e OPENPALETTE_MSB_PORT=80 ${IMAGE_MGRSERVICE_NAME}
+docker run -d --name vfc_wfengine_mgrservice -p 8805:10550 -e SERVICE_PORT=10550 -e OPENPALETTE_MSB_IP=${WFENGINE_ACTIVITI_IP} -e OPENPALETTE_MSB_PORT=8080 ${IMAGE_MGRSERVICE_NAME}
+
+##docker run -d --name ${IMAGE} -e OPENPALETTE_MSB_IP=${WFENGINEACTIVITIR_IP} -e OPENPALETTE_MSB_PORT=8080 ${IMAGE_MGRSERVICE_NAME}
+WFENGINE_MGRSERVICE_IP=`get-instance-ip.sh vfc_wfengine_mgrservice`
+for i in {1..10}; do
+    curl -sS ${WFENGINE_MGRSERVICE_IP}:10550 && break
+    echo sleep $i
+    sleep $i
+done
+docker logs vfc_wfengine_mgrservice
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v MSB_IAG_IP:${MSB_IAG_IP} -v MSB_IP:${MSB_IAG_IP} -v MSB_PORT:80 -v MSB_DISCOVERY_IP:${MSB_DISCOVERY_IP} -v ACTIVITI_IP:${WFENGINE_ACTIVITI_IP} -v ACTIVITI_PORT:8080 -v MGRSERVICE_IP:${WFENGINE_MGRSERVICE_IP} -v MGRSERVICE_PORT:10550 -v SCRIPTS:${SCRIPTS}" 
+##ROBOT_VARIABLES="-v MSB_IAG_IP:${WFENGINEACTIVITIR_IP} -v MSB_IP:${WFENGINEMGRSERVICE_IP} -v MSB_PORT:10550 -v MSB_DISCOVERY_IP:${WFENGINEACTIVITIR_IP} -v MSB_DISCOVERY_PORT:8080 -v WFENGINEACTIVITIR_IP:${WFENGINEACTIVITIR_IP} -v WFENGINEACTIVITIR_PORT:8080 -v WFENGINEMGRSERVICE_IP:${WFENGINEMGRSERVICE_IP} -v WFENGINEMGRSERVICE_PORT:10550 -v SCRIPTS:${SCRIPTS}" 
\ No newline at end of file
diff --git a/plans/vfc-nfvo-wfengine/sanity-check/teardown.sh b/plans/vfc-nfvo-wfengine/sanity-check/teardown.sh
new file mode 100644
index 00000000..bca33569
--- /dev/null
+++ b/plans/vfc-nfvo-wfengine/sanity-check/teardown.sh
@@ -0,0 +1,29 @@
+#!/bin/bash
+#
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This script is sourced by run-csit.sh after Robot test completion.
+echo === logs vfc_wfengine_activiti ===
+docker logs vfc_wfengine_activiti
+
+echo === logs vfc_wfengine_mgrservice ===
+docker logs vfc_wfengine_mgrservice
+
+kill-instance.sh msb_internal_apigateway
+kill-instance.sh msb_discovery
+kill-instance.sh msb_consul
+kill-instance.sh vfc_wfengine_mgrservice
+kill-instance.sh vfc_wfengine_activiti
diff --git a/plans/vfc-nfvo-wfengine/sanity-check/testplan.txt b/plans/vfc-nfvo-wfengine/sanity-check/testplan.txt
new file mode 100644
index 00000000..ff9f4d5d
--- /dev/null
+++ b/plans/vfc-nfvo-wfengine/sanity-check/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+
+vfc/nfvo-wfengine/workflow.robot
\ No newline at end of file
diff --git a/plans/vid/healthCheck/setup.sh b/plans/vid/healthCheck/setup.sh
new file mode 100644
index 00000000..ce308cfa
--- /dev/null
+++ b/plans/vid/healthCheck/setup.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+
+/usr/bin/Xvfb :0 -screen 0 1024x768x24&
+export DISPLAY=:0
+
+source ${WORKSPACE}/test/csit/scripts/vid/clone_and_setup_vid_data.sh
+
+source ${WORKSPACE}/test/csit/scripts/vid/start_vid_containers.sh
+
+
+BE_IP=`get-instance-ip.sh vid-server`
+echo BE_IP=${BE_IP}
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v BE_IP:${BE_IP}"
diff --git a/plans/vid/healthCheck/teardown.sh b/plans/vid/healthCheck/teardown.sh
new file mode 100644
index 00000000..e82ef306
--- /dev/null
+++ b/plans/vid/healthCheck/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+source ${WORKSPACE}/test/csit/scripts/vid/kill_containers_and_remove_dataFolders.sh
+
+# $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/plans/vid/healthCheck/testplan.txt b/plans/vid/healthCheck/testplan.txt
new file mode 100644
index 00000000..92d8b058
--- /dev/null
+++ b/plans/vid/healthCheck/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vid/healthCheck
+vid/login
diff --git a/plans/vnfsdk-ice/sanity-check/setup.sh b/plans/vnfsdk-ice/sanity-check/setup.sh
new file mode 100644
index 00000000..22d9acdd
--- /dev/null
+++ b/plans/vnfsdk-ice/sanity-check/setup.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2018 Orange Labs.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# These scripts are sourced by run-csit.sh.
+
+
+#Start ice server
+docker run --name vnfsdk-ice -d -p 5000:5000 nexus3.onap.org:10001/onap/vnfsdk/ice:latest
+
+# Wait for server initialization
+echo Wait for vnfsdk-ice initialization
+until [ "`/usr/bin/docker inspect -f {{.State.Running}} vnfsdk-ice`"=="true" ]; do
+	    sleep 1;
+done;
+ICE_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' vnfsdk-ice`
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS} -v ICE_IP:${ICE_IP}"
+echo ${ROBOT_VARIABLES}
+
diff --git a/plans/vnfsdk-ice/sanity-check/teardown.sh b/plans/vnfsdk-ice/sanity-check/teardown.sh
new file mode 100644
index 00000000..c84ea757
--- /dev/null
+++ b/plans/vnfsdk-ice/sanity-check/teardown.sh
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# Copyright 2018 Orange Labs.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This script is sourced by run-csit.sh after Robot test completion.
+
+
+kill-instance.sh vnfsdk-ice
+
+
diff --git a/plans/vnfsdk-ice/sanity-check/testplan.txt b/plans/vnfsdk-ice/sanity-check/testplan.txt
new file mode 100644
index 00000000..c84eb031
--- /dev/null
+++ b/plans/vnfsdk-ice/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+## Test suites are relative paths under [integration.git]/test/csit/tests/.
+## Place the suites in run order.
+vnfsdk-ice/ice-server/validation_test.robot
diff --git a/plans/vnfsdk-marketplace/sanity-check/enterprise2DC.csar b/plans/vnfsdk-marketplace/sanity-check/enterprise2DC.csar
new file mode 100644
index 00000000..0960b20a
--- /dev/null
+++ b/plans/vnfsdk-marketplace/sanity-check/enterprise2DC.csar
diff --git a/plans/vnfsdk-marketplace/sanity-check/setup.sh b/plans/vnfsdk-marketplace/sanity-check/setup.sh
new file mode 100644
index 00000000..85c6bc27
--- /dev/null
+++ b/plans/vnfsdk-marketplace/sanity-check/setup.sh
@@ -0,0 +1,30 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# These scripts are sourced by run-csit.sh.
+
+
+
+#Start market place
+docker run -d -i -t --name=vnfmarket   -p 8702:8702 onap/vnfmarket
+
+REPO_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' vnfmarket`
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v REPO_IP:${REPO_IP}"
+
+
diff --git a/plans/vnfsdk-marketplace/sanity-check/teardown.sh b/plans/vnfsdk-marketplace/sanity-check/teardown.sh
new file mode 100644
index 00000000..42d7b7fd
--- /dev/null
+++ b/plans/vnfsdk-marketplace/sanity-check/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This script is sourced by run-csit.sh after Robot test completion.
+
+
+kill-instance.sh vnfmarket
+
diff --git a/plans/vnfsdk-marketplace/sanity-check/testplan.txt b/plans/vnfsdk-marketplace/sanity-check/testplan.txt
new file mode 100644
index 00000000..730df014
--- /dev/null
+++ b/plans/vnfsdk-marketplace/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+## Test suites are relative paths under [integration.git]/test/csit/tests/.
+## Place the suites in run order.
+vnfsdk-marketplace/provision/sanity_test_vnfsdktestfunction.robot
diff --git a/plans/vnfsdk-marketplace/sanity-check/uploadCSAR.sh b/plans/vnfsdk-marketplace/sanity-check/uploadCSAR.sh
new file mode 100644
index 00000000..279912c3
--- /dev/null
+++ b/plans/vnfsdk-marketplace/sanity-check/uploadCSAR.sh
@@ -0,0 +1,138 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPT_DIR
+
+#CHECK IF MSB_ADDR IS GIVEN IN COMMAND
+if [ -z "$1" ]
+then
+   echo "There is no MSB_ADDR"
+   exit 1
+fi
+MSB_ADDR=$1
+CSAR_NAME=$2
+echo $MSB_ADDR
+echo $CSAR_NAME
+
+# Wait for MSB initialization
+echo Wait for MSB initialization
+for i in {1..20}; do
+    curl -sS -m 1 $MSB_ADDR > /dev/null && break
+    sleep $i
+done
+#MSB initialized 
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+############UOLOAD PACKAGE to MARKET PLACE######################
+echo
+echo "############## UOLOAD PACKAGE to MARKET PLACE STARTED ##############";
+UploadPackageResponse=$(curl -sS -X POST -H "Content-Type: multipart/form-data;" -F "file=@$CSAR_NAME"  http://$MSB_ADDR/openoapi/vnfsdk-marketplace/v1/PackageResource/csars)
+if echo "$UploadPackageResponse" | grep -q "\"csarId\""; then
+	echo "UOLOAD PACKAGE TO MARKET PLACE SUCSSS !!!";
+else
+	echo "UploadPackageResponse :$UploadPackageResponse"
+	echo "UOLOAD PACKAGE TO MARKET PLACE FAILED !!!";
+	exit 1;
+fi
+UploadCsarId=$(echo ${UploadPackageResponse:11:36})
+echo "PACKAGE ID:$UploadCsarId"
+echo "############## UOLOAD PACKAGE to MARKET PLACE END ##################";
+#######UOLOAD PACKAGE to MARKET PLACE END#############
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+################GET ON BOARD STATUS########
+echo
+echo "####################### GETTING ON-BOARDING STATUS ##################";
+#sleeping for 10 sec so thate ON Boarding operation should be happened at backend
+for pc in $(seq 1 10); do
+	status=$((${pc}*10));
+    echo -ne "ON_BOARDING Status (%): $status\033[0K\r"
+    sleep 1
+done
+echo
+
+#Three Retries for getting On Boarding Result
+#count=0
+#while [ $count -lt 3 ]
+#do
+#	OnBoardStatusResponse=$(curl -sS -X GET  "http://$MSB_ADDR/openoapi/vnfsdk-marketplace/v1/PackageResource/csars/$UploadCsarId/onboardstatus?operTypeId=functiontest&operId=functestexec" -H "Accept: application/json" -H "Content-Type: application/json")
+#	echo $OnBoardStatusResponse	
+#	if echo "$OnBoardStatusResponse" | grep -q "\"status\":0"; then
+#		break;
+#	else
+#		if [ $count -eq 3 ]
+#		then
+#			echo "ON-BOARDING OPERATION FAILED !!!";
+#		fi
+#		count=`expr $count + 1`;
+#		sleep 3;
+#	fi
+#done
+echo "GET ON-BOARDING RESULT OPERATION SUCESS ";
+echo "##################### GETTING ON-BOARDING STATUS END #################";
+####################GET ON BOARD STATUS END############
+##########################################
+##########################################
+##########################################
+##########################################
+##########################################
+#################DOWNLOAD PACKAGE#########
+echo
+echo "############## DOWNLOADED PACKAGE FROM MARKET STARTED #################";
+PACKAGE_NAME=market_temp.csar
+curl -sS -X GET  "http://$MSB_ADDR/openoapi/vnfsdk-marketplace/v1/PackageResource/csars/$UploadCsarId/files" > $PACKAGE_NAME
+fileSize=$(du  -b $PACKAGE_NAME | cut -f 1)
+if [ $fileSize -eq 0 ]
+then
+	echo "DOWNLOADED PACKAGE FROM MARKET NOT PROPER, ON-BOARDING OPERATION FAILED !!!";
+	exit 1;
+fi
+echo "DOWNLOADED PACKAGE FROM MARKET OPERATION SUCESS !!!";
+echo "MARKET PACKAGE NAME:$PACKAGE_NAME"
+echo "##################### DOWNLOADED PACKAGE FROM MARKET ##################";
+###################DOWNLOAD PACKAGE END#####################
+##########################################
+##########################################
+##########################################
+##########################################
+##########CATALOUGE START#################
+echo
+PACKAGE_NAME=$CSAR_NAME
+#Check if common-tosca-catalog  is registered with MSB or not
+#curl -sS -X GET http://$MSB_ADDR/api/microservices/v1/services/catalog/version/v1 -H "Accept: application/json" -H "Content-Type: application/json" 
+#check if common-tosca-aria is registered with MSB or not 
+#curl -sS -X GET http://$MSB_ADDR/api/microservices/v1/services/tosca/version/v1 -H "Accept: application/json" -H "Content-Type: application/json"
+#echo Sending POST request to Catalog
+CsarIdString=$(curl -sS -X POST -H "Content-Type: multipart/form-data; boundary=-WebKitFormBoundary7MA4YWxkTrZu0gW" -H "Cache-Control: no-cache" -H "Postman-Token: abcb6497-b225-c592-01be-e9ff460ca188" -F "file=@$PACKAGE_NAME" http://$MSB_ADDR/openoapi/catalog/v1/csars)
+#getting csarId from the output of curl request
+CsarId=$(echo ${CsarIdString:11:36})
+echo $CsarId
+echo $CsarIdString
+#csarid is sucessfully stored in CsarId variable
+echo "====finished======"
+##########CATALOUGE END############
+echo "DELETING PACAKE LOCAL COPY:$PACKAGE_NAME";
+#rm $PACKAGE_NAME;
diff --git a/plans/vnfsdk-pkgtools/sanity-check/setup.sh b/plans/vnfsdk-pkgtools/sanity-check/setup.sh
new file mode 100755
index 00000000..3921bb0a
--- /dev/null
+++ b/plans/vnfsdk-pkgtools/sanity-check/setup.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Intel Corp., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+
+# Clone vnfsdk/pkgtools repo and install it
+mkdir -p $WORKSPACE/archives/pkgtools
+cd $WORKSPACE/archives
+git clone -b master --single-branch http://gerrit.onap.org/r/vnfsdk/pkgtools.git pkgtools
+cd $WORKSPACE/archives/pkgtools
+git pull
+echo "To install vnfsdk pkgtools git head revision: $(git rev-parse HEAD)"
+python setup.py egg_info
+pip install .
+
+pip freeze | tee $WORKSPACE/archives/_pip-freeze-after-setup.txt
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
+
diff --git a/plans/vnfsdk-pkgtools/sanity-check/teardown.sh b/plans/vnfsdk-pkgtools/sanity-check/teardown.sh
new file mode 100755
index 00000000..ce0ab6d9
--- /dev/null
+++ b/plans/vnfsdk-pkgtools/sanity-check/teardown.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
diff --git a/plans/vnfsdk-pkgtools/sanity-check/testplan.txt b/plans/vnfsdk-pkgtools/sanity-check/testplan.txt
new file mode 100644
index 00000000..05ff05a2
--- /dev/null
+++ b/plans/vnfsdk-pkgtools/sanity-check/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vnfsdk-pkgtools/tosca-metadata/create_open.robot
+vnfsdk-pkgtools/tosca-metadata/create_validate_digest_signing.robot
diff --git a/plans/vnfsdk-refrepo/sanity-check/enterprise2DC.csar b/plans/vnfsdk-refrepo/sanity-check/enterprise2DC.csar
new file mode 100644
index 00000000..0960b20a
--- /dev/null
+++ b/plans/vnfsdk-refrepo/sanity-check/enterprise2DC.csar
diff --git a/plans/vnfsdk-refrepo/sanity-check/setup.sh b/plans/vnfsdk-refrepo/sanity-check/setup.sh
new file mode 100644
index 00000000..ecee227f
--- /dev/null
+++ b/plans/vnfsdk-refrepo/sanity-check/setup.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# These scripts are sourced by run-csit.sh.
+
+
+#Start postgres database
+docker run -d -i -t --name=postgres   -p 5432:5432 nexus3.onap.org:10001/onap/vnfsdk/refrepo/postgres:latest
+
+POSTGRES=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' postgres`
+
+#Start market place
+docker run -d -i -t --name=refrepo -e POSTGRES_SERVICE_HOST=$POSTGRES  -p 8702:8702 nexus3.onap.org:10001/onap/vnfsdk/refrepo:1.1-STAGING-latest
+
+# Wait for Market place initialization
+echo Wait for VNF Repository initialization
+for i in {1..30}; do
+    sleep 1
+done
+
+REPO_IP=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' refrepo`
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS} -v REPO_IP:${REPO_IP}"
+echo ${ROBOT_VARIABLES}
+
diff --git a/plans/vnfsdk-refrepo/sanity-check/teardown.sh b/plans/vnfsdk-refrepo/sanity-check/teardown.sh
new file mode 100644
index 00000000..19440bc7
--- /dev/null
+++ b/plans/vnfsdk-refrepo/sanity-check/teardown.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# This script is sourced by run-csit.sh after Robot test completion.
+
+
+kill-instance.sh refrepo
+kill-instance.sh postgres
+
+
diff --git a/plans/vnfsdk-refrepo/sanity-check/testplan.txt b/plans/vnfsdk-refrepo/sanity-check/testplan.txt
new file mode 100644
index 00000000..730df014
--- /dev/null
+++ b/plans/vnfsdk-refrepo/sanity-check/testplan.txt
@@ -0,0 +1,3 @@
+## Test suites are relative paths under [integration.git]/test/csit/tests/.
+## Place the suites in run order.
+vnfsdk-marketplace/provision/sanity_test_vnfsdktestfunction.robot
diff --git a/plans/vnfsdk-refrepo/sanity-check/uploadCSAR.sh b/plans/vnfsdk-refrepo/sanity-check/uploadCSAR.sh
new file mode 100644
index 00000000..279912c3
--- /dev/null
+++ b/plans/vnfsdk-refrepo/sanity-check/uploadCSAR.sh
@@ -0,0 +1,138 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPT_DIR
+
+#CHECK IF MSB_ADDR IS GIVEN IN COMMAND
+if [ -z "$1" ]
+then
+   echo "There is no MSB_ADDR"
+   exit 1
+fi
+MSB_ADDR=$1
+CSAR_NAME=$2
+echo $MSB_ADDR
+echo $CSAR_NAME
+
+# Wait for MSB initialization
+echo Wait for MSB initialization
+for i in {1..20}; do
+    curl -sS -m 1 $MSB_ADDR > /dev/null && break
+    sleep $i
+done
+#MSB initialized 
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+############UOLOAD PACKAGE to MARKET PLACE######################
+echo
+echo "############## UOLOAD PACKAGE to MARKET PLACE STARTED ##############";
+UploadPackageResponse=$(curl -sS -X POST -H "Content-Type: multipart/form-data;" -F "file=@$CSAR_NAME"  http://$MSB_ADDR/openoapi/vnfsdk-marketplace/v1/PackageResource/csars)
+if echo "$UploadPackageResponse" | grep -q "\"csarId\""; then
+	echo "UOLOAD PACKAGE TO MARKET PLACE SUCSSS !!!";
+else
+	echo "UploadPackageResponse :$UploadPackageResponse"
+	echo "UOLOAD PACKAGE TO MARKET PLACE FAILED !!!";
+	exit 1;
+fi
+UploadCsarId=$(echo ${UploadPackageResponse:11:36})
+echo "PACKAGE ID:$UploadCsarId"
+echo "############## UOLOAD PACKAGE to MARKET PLACE END ##################";
+#######UOLOAD PACKAGE to MARKET PLACE END#############
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+###########################################
+################GET ON BOARD STATUS########
+echo
+echo "####################### GETTING ON-BOARDING STATUS ##################";
+#sleeping for 10 sec so thate ON Boarding operation should be happened at backend
+for pc in $(seq 1 10); do
+	status=$((${pc}*10));
+    echo -ne "ON_BOARDING Status (%): $status\033[0K\r"
+    sleep 1
+done
+echo
+
+#Three Retries for getting On Boarding Result
+#count=0
+#while [ $count -lt 3 ]
+#do
+#	OnBoardStatusResponse=$(curl -sS -X GET  "http://$MSB_ADDR/openoapi/vnfsdk-marketplace/v1/PackageResource/csars/$UploadCsarId/onboardstatus?operTypeId=functiontest&operId=functestexec" -H "Accept: application/json" -H "Content-Type: application/json")
+#	echo $OnBoardStatusResponse	
+#	if echo "$OnBoardStatusResponse" | grep -q "\"status\":0"; then
+#		break;
+#	else
+#		if [ $count -eq 3 ]
+#		then
+#			echo "ON-BOARDING OPERATION FAILED !!!";
+#		fi
+#		count=`expr $count + 1`;
+#		sleep 3;
+#	fi
+#done
+echo "GET ON-BOARDING RESULT OPERATION SUCESS ";
+echo "##################### GETTING ON-BOARDING STATUS END #################";
+####################GET ON BOARD STATUS END############
+##########################################
+##########################################
+##########################################
+##########################################
+##########################################
+#################DOWNLOAD PACKAGE#########
+echo
+echo "############## DOWNLOADED PACKAGE FROM MARKET STARTED #################";
+PACKAGE_NAME=market_temp.csar
+curl -sS -X GET  "http://$MSB_ADDR/openoapi/vnfsdk-marketplace/v1/PackageResource/csars/$UploadCsarId/files" > $PACKAGE_NAME
+fileSize=$(du  -b $PACKAGE_NAME | cut -f 1)
+if [ $fileSize -eq 0 ]
+then
+	echo "DOWNLOADED PACKAGE FROM MARKET NOT PROPER, ON-BOARDING OPERATION FAILED !!!";
+	exit 1;
+fi
+echo "DOWNLOADED PACKAGE FROM MARKET OPERATION SUCESS !!!";
+echo "MARKET PACKAGE NAME:$PACKAGE_NAME"
+echo "##################### DOWNLOADED PACKAGE FROM MARKET ##################";
+###################DOWNLOAD PACKAGE END#####################
+##########################################
+##########################################
+##########################################
+##########################################
+##########CATALOUGE START#################
+echo
+PACKAGE_NAME=$CSAR_NAME
+#Check if common-tosca-catalog  is registered with MSB or not
+#curl -sS -X GET http://$MSB_ADDR/api/microservices/v1/services/catalog/version/v1 -H "Accept: application/json" -H "Content-Type: application/json" 
+#check if common-tosca-aria is registered with MSB or not 
+#curl -sS -X GET http://$MSB_ADDR/api/microservices/v1/services/tosca/version/v1 -H "Accept: application/json" -H "Content-Type: application/json"
+#echo Sending POST request to Catalog
+CsarIdString=$(curl -sS -X POST -H "Content-Type: multipart/form-data; boundary=-WebKitFormBoundary7MA4YWxkTrZu0gW" -H "Cache-Control: no-cache" -H "Postman-Token: abcb6497-b225-c592-01be-e9ff460ca188" -F "file=@$PACKAGE_NAME" http://$MSB_ADDR/openoapi/catalog/v1/csars)
+#getting csarId from the output of curl request
+CsarId=$(echo ${CsarIdString:11:36})
+echo $CsarId
+echo $CsarIdString
+#csarid is sucessfully stored in CsarId variable
+echo "====finished======"
+##########CATALOUGE END############
+echo "DELETING PACAKE LOCAL COPY:$PACKAGE_NAME";
+#rm $PACKAGE_NAME;
diff --git a/plans/vvp/sanity/setup.sh b/plans/vvp/sanity/setup.sh
new file mode 100644
index 00000000..cab074c0
--- /dev/null
+++ b/plans/vvp/sanity/setup.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+
+
+source ${WORKSPACE}/test/csit/scripts/vvp/clone_and_setup_vvp_data.sh
+
+source ${WORKSPACE}/test/csit/scripts/vvp/start_vvp_containers.sh
+
+source ${WORKSPACE}/test/csit/scripts/vvp/docker_health.sh
+
+source ${WORKSPACE}/test/csit/scripts/vvp/start_vvp_sanity.sh
+
+
+VVP_IP=`${WORKSPACE}/test/csit/scripts/get-instance-ip.sh vvp-engagementmgr`
+echo VVP_IP=${VVP_IP}
+
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v VVP_IP:${VVP_IP}"
diff --git a/plans/vvp/sanity/teardown.sh b/plans/vvp/sanity/teardown.sh
new file mode 100644
index 00000000..b0f33a64
--- /dev/null
+++ b/plans/vvp/sanity/teardown.sh
@@ -0,0 +1,20 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+source ${WORKSPACE}/test/csit/scripts/vvp/kill_containers_and_remove_dataFolders.sh
diff --git a/plans/vvp/sanity/testplan.txt b/plans/vvp/sanity/testplan.txt
new file mode 100644
index 00000000..0acb5083
--- /dev/null
+++ b/plans/vvp/sanity/testplan.txt
@@ -0,0 +1,3 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+vvp/sanity