diff options
Diffstat (limited to 'docs')
42 files changed, 423 insertions, 449 deletions
diff --git a/docs/guides/onap-user/design/index.rst b/docs/guides/onap-user/design/index.rst index b003e55ca..ec7d67b6f 100644 --- a/docs/guides/onap-user/design/index.rst +++ b/docs/guides/onap-user/design/index.rst @@ -27,16 +27,16 @@ Onboarding, Design and Distribution process. **The "Core" Design Process includes the following steps:** -* Pre-Onboarding - A VNF/PNF Provider delivers VNF descriptor, model and - artefacts (e.g. HEAT template), which will be validated +**Pre-Onboarding** + A VNF/PNF/CNF Provider delivers its descriptor, model and + artefacts (e.g. HEAT template, Helm Chart), which will be validated and packaged for onboarding to ONAP -* (Resource)-Onboarding - In the SDC a License Model is created, the VNF/PNF package imported +**(Resource)-Onboarding** + In the SDC a License Model is created, the VNF/PNF/CNF package imported and a Vendor Software Product (VSP) is created -* VF Creation and Testing +**VF Creation and Testing** A V(N)F, PNF or CR Model is created (a) import of a VSP or VFC (b) manual creation and import of artefacts created via external tools like the Controller Design Studio (CDS), responsible for the @@ -44,20 +44,19 @@ Onboarding, Design and Distribution process. The created VF will pass a testing workflow to be used in a Service Model -* Service Design +**Service Design** A Service Model is created as a composition of resources (e.g. V(N)Fs, PNFs,...), Policies, Workflows,... - The created Service Model will pass a testing workflow and - handed over to a Governance Approval and Distribution process + The created Service Model will ber certified and handed over to + the Service Distribution process -* Governance Approval and Distribution - The Service Provider will have a specific set of policies and - procedures for approving Services and deploying them in the +**Service Distribution** + The Service Provider will distribute the Service Model to the Runtime Service Catalog **The optional/additional Design steps are:** -* VNF parameter assignment templating +**VNF parameter assignment templating** The objective is to automate the resolution of resources for instantiation and any config provisioning operation, such as day0, day1 or day2 configuration. @@ -67,7 +66,7 @@ Onboarding, Design and Distribution process. ONAP CDS (Controller Design Studio) is the controller that will process the Controller Blueprint archive (CBA) at run-time. -* Policy Design +**Policy Design** These are rules, conditions, requirements, constraints, attributes, or needs that must be provided, maintained, and/or enforced. At a lower level, Policy involves machine-readable rules enabling @@ -75,18 +74,18 @@ Onboarding, Design and Distribution process. provides some policy models that are implemented and pre-loaded when installing ONAP. -* VNF LifeCycle Command templating +**VNF LifeCycle Command templating** APPC Controller Design Tool (CDT) is used for self-service onboarding of VNF’s. VNF owners can create templates and other artifacts for APPC Configure command (used to apply a post-instantiation configuration) as well as other life cycle commands. -* Workflow Design +**Workflow Design** The purpose of the Workflow Designer is to enable designers to define or modify workflows to support Service/Resource change management scenarios executed by the Service Orchestrator. -* Control Loop Design +**Control Loop Design** This phase includes the Design of a closed loop template and associate it to a Service. The template represents the theoretical flow of the CL. It generates a deployment artifact that can be ingested by the DCAE in @@ -111,7 +110,7 @@ The follwing sections will focus on the different Design steps: Service Design <./service-design/index.rst> - Governance Approval and Service Distribution <./service-distribution/index.rst> + Service Distribution <./service-distribution/index.rst> VNF parameter resolution Design <./parameter_resolution/index.rst> diff --git a/docs/guides/onap-user/design/media/Design-Overview.png b/docs/guides/onap-user/design/media/Design-Overview.png Binary files differindex c0c091ac0..276e53fc0 100755..100644 --- a/docs/guides/onap-user/design/media/Design-Overview.png +++ b/docs/guides/onap-user/design/media/Design-Overview.png diff --git a/docs/guides/onap-user/design/media/Design-Overview.pptx b/docs/guides/onap-user/design/media/Design-Overview.pptx Binary files differindex 835508a4c..64416a801 100755..100644 --- a/docs/guides/onap-user/design/media/Design-Overview.pptx +++ b/docs/guides/onap-user/design/media/Design-Overview.pptx diff --git a/docs/guides/onap-user/design/pre-onboarding/index.rst b/docs/guides/onap-user/design/pre-onboarding/index.rst index 5bfc8d4cc..796c4f340 100644 --- a/docs/guides/onap-user/design/pre-onboarding/index.rst +++ b/docs/guides/onap-user/design/pre-onboarding/index.rst @@ -7,63 +7,9 @@ Pre-Onboarding ============== - * `Create a Tenant`_ (will be moved to "Service Deployment") * `Generate Manifest and Package Artifacts`_ (for HEAT based VNFs) * `Validate xNF Package (VNF/PNF)`_ -.. _doc_guide_user_des_pre-onb_cre-ten: - -Create a Tenant ---------------- - -.. note:: - This section is not really belonging to the "Design" phase, - but to the preparation of the "Service Deployment" and will be - moved in the next release - -Each service requires a tenant_ (a group of users who share a common access) -in which resources are stored in the cloud. This process is performed using -facilities of the network cloud, outside of ONAP. Confirm that the tenant is -created and note the tenant ID. - -ONAP admin users can configure a cloud-owner to add new cloud resources. -These are the computing and networking resources, that will support -running VNFs. A cloud-owner holds a keystone URL, login, region and -password, in the case of an Openstack cluster. A cloud-owner also -belongs to a region. The region name should be the same as the Openstack -region. Prior to creation of a cloud-owner, its region must be created -first. Multiple tenants can share the same cloud-owner. Note that these -tenants are ONAP tenants, not Openstack tenants. Tenant register -services that customers are allowed to deploy. Finally, the customer is -like an instance of the tenant. - -Note: there is no GUI (yet) to configure these objects. REST requests -are sent to AAI to achieve the configuration. For a detailed list of -required REST commands see: - -https://wiki.onap.org/display/DW/running+vFW+Demo+on+ONAP+Amsterdam+Release - -The overall process is as follows: - - #. Create a region and a cloud-owner. This steps registers Openstack - credentials. This is the only step requiring entering Openstack specific - parameters. - - #. Create a complex. The complex describes the coverage of the region with - a street address etc. - - #. Create a service. The service name should match the name of the service - onboarded in SDC. - - #. Create a tenant. Tenant in ONAP stores a design for a generic customer. - - #. Associate tenants with their allowed services. - - #. Create an instance of the tenant or customer. The customer is visible in - VID. A VID user can deploy allowed services on this new customer. - - |image1| - .. _doc_guide_user_des_pre-onb_gen-man: @@ -76,8 +22,11 @@ Generate Manifest and Package Artifacts to create TOSCA based VNF or PNF Onboarding Packages are not described here -Before onboarding resources, run generate-manifest.py to generate a -MANIFEST file. These steps are performed outside SDC. +The for onboarding the zip-file requires besides the HEAT template also a MANIFEST.json file, which describes the content of the package. +To generate a MANIFEST.json file a script can be used offered by the SDC project: +`generate-manifest.py`_ + +These steps are performed outside SDC. **Prerequisites:** Obtain Heat/ENV files and other files required for onboarding. The requirements are found in the following document. @@ -86,7 +35,7 @@ onboarding. The requirements are found in the following document. `Heat requirements <../../../../submodules/vnfrqts/requirements.git/docs/Chapter5/Heat/index.html>`_ #. Put the Heat, ENV, nested Heat, and other files used by get-file in templates - in a directory. + in a directory on a host, which supports python. Naming guidelines: @@ -103,7 +52,7 @@ onboarding. The requirements are found in the following document. - [dir y] contains the Heat/ENV files and other files - [dir x] contains the python script -#. Run the script on the Windows command line (not valid anymore): +#. Run the script via command line: .. code-block:: python @@ -114,6 +63,8 @@ onboarding. The requirements are found in the following document. #. Package all Heat/ENV files, all other files, and the MANIFEST.json into one .zip file. +Example packages can be found in the SDC poject: `example-packages`_ + .. _doc_guide_user_des_pre-onb_val: Validate xNF Package (VNF/PNF) @@ -128,11 +79,7 @@ VNF and PNF packages have to follow the requirements described in: For Validation of VNF and PNF packages the tools delivered by VNFSDK can be used: -.. toctree:: - :maxdepth: 1 - :titlesonly: - - ../../../onap-provider/vnfvalidator.rst +`VNF Validation Documentation <../../../onap-provider/vnfvalidator.rst>`_ Prior to resource onboarding, the Certification Group does the following: @@ -159,5 +106,5 @@ Cloud. No VF functionality testing is performed at this stage. -.. |image1| image:: media/tenant.png -.. _tenant: https://wiki.onap.org/display/DW/Glossary#Glossary-tenant +.. _generate-manifest.py: https://git.onap.org/sdc/tree/openecomp-be/tools/scripts/generate-manifest.py +.. _example-packages: https://git.onap.org/sdc/tree/test-apis-ci/sdc-api-tests/chef-repo/cookbooks/sdc-api-tests/files/default/Files
\ No newline at end of file diff --git a/docs/guides/onap-user/design/resource-onboarding/index.rst b/docs/guides/onap-user/design/resource-onboarding/index.rst index a25983856..63f588d2c 100644 --- a/docs/guides/onap-user/design/resource-onboarding/index.rst +++ b/docs/guides/onap-user/design/resource-onboarding/index.rst @@ -43,16 +43,23 @@ Note: For interim saving while creating the license model and its components, click |image2| **Prerequisites:** To obtain license information, contact the service - provider's Supply Chain Management (SCM) group. +provider's Supply Chain Management (SCM) group. -|image3| #. From the SDC HOME page, click *ONBOARD*. -#. Hover over Add and select New License Model. + + |image11| + +#. In the Workspace select *CREATE NEW VLM*. + + |image12| + #. Complete all fields. -#. Click *Save*. -#. In the ONBOARD header, hover over the arrow after License Agreements to - reveal a menu. +#. Click *Create*. +#. In the Overview Dialog. + + |image13| + Select the following options in order: #. Create 0 or more license key groups (see @@ -64,13 +71,17 @@ click |image2| Note: Perform all steps above before submitting the license model to the SDC catalog. -#. In the header, click the license model created in steps 1 to 4. -#. Click *Check In* to save changes. -#. Click *Submit* to add the license model to the catalog. A success message - displays. + |image14| + +#. Click *Submit* to add the license model to the catalog. +After filling a comment, press *Commit&Submit*. + + |image15| + #. After creating a license, complete `Create a Vendor Software Product`_ to add the VSP required for the associated VF/PNF. + Create a License Key Group [Optional] ------------------------------------- @@ -79,29 +90,28 @@ otherwise the license key group is optional. **Prerequisites:** `Create a License Model`_ -|image4| +#. Select the License Model in the Onboard section of the SDC. +#. In the Overview click the + behind the *License Key Groups*. + + |image4| -1. From the drop-down menu, select License Key Groups. -2. Click *Add License Key Group*. - The Create New License Key Group box displays. -3. Complete all fields. - Note: Enter the manufacturer reference number in the Name field. -4. Click *Save*. +#. Complete all fields (mandatory fields are marked by a red asterisk). +#. Click *Save*. Create an Entitlement Pool -------------------------- **Prerequisites:** If required by the resource model, create one or more - license key groups (see - `Create a License Key Group [Optional]`_). +license key groups (see +`Create a License Key Group [Optional]`_). + +#. Select the License Model in the Onboard section of the SDC. +#. In the Overview click the + behind the *Entitlement Pools*. -|image5| + |image5| -1. From the drop-down menu, select Entitlement Pools. -2. Click *Add Entitlement Pool*. - The Create New Entitlement Pool box displays. -3. Complete required fields (mandatory fields are marked by a red asterisk). -4. Click *Save*. +#. Complete required fields (mandatory fields are marked by a red asterisk). +#. Click *Save*. Create a Feature Group ---------------------- @@ -112,19 +122,19 @@ Create a Feature Group (see `Create a License Key Group [optional]`_) * entitlement pools (see `Create an Entitlement Pool`_) -|image6| +#. Select the License Model in the Onboard section of the SDC. +#. In the Overview click the + behind the *Feature Groups*. + + |image6| -1. From the drop-down menu, select Feature Groups. -2. Click *Add Feature Group*. - The Create New Feature Group box displays. -3. On the General tab, complete all fields. -4. Click *Entitlement Pools*. -5. Click *Available Entitlement Pools*. -6. Select one or more entitlement pools and click the right arrow. -7. Click *License Key Groups*. -8. Click *Available License Key Groups*. -9. Select one or more license key groups and click the right arrow. -10. Click *Save*. +#. On the General tab, complete all fields. +#. Click *Entitlement Pools*. +#. Click *Available Entitlement Pools*. +#. Select one or more entitlement pools and click the right arrow. +#. Click *License Key Groups*. +#. Click *Available License Key Groups*. +#. Select one or more license key groups and click the right arrow. +#. Click *Save*. Create a License Agreement -------------------------- @@ -132,18 +142,17 @@ Create a License Agreement **Prerequisites:** Create one or more feature groups (see `Create a Feature Group`_). -|image7| +#. Select the License Model in the Onboard section of the SDC. +#. In the Overview click the + behind the *License Agreements*. + + |image7| -1. From the drop-down menu, select License Agreements. -2. Click *Add License Agreement*. - The Create New License Agreement box displays. -3. On the General tab, complete required fields (mandatory fields are marked - by a red asterisk). -4. Click *Feature Groups*. -5. If not selected, click *Available Feature Groups*. -6. Select one or more groups and click the right arrow. -7. Click *Save*. -8. Return to step 5 of `Create a License Model`_ to complete the license model. +#. On the General tab, complete required fields. +#. Click *Feature Groups*. +#. If not selected, click *Available Feature Groups*. +#. Select one or more groups and click the right arrow. +#. Click *Save*. +#. Return to step 6 of `Create a License Model`_ to complete the license model. .. _doc_guide_user_des_res-onb_cre-vsp: @@ -166,31 +175,44 @@ for VFs/PNFs. * If the package is a secure package then :ref:`pre-install the corresponding Root Certificate in SDC <doc_guide_user_des_res-onb_pre-install_root_certificate>`. #. From the SDC HOME page, click *ONBOARD*. -#. Hover over Add and select New Vendor Software Product. -#. The New Software Product box is displayed. - Complete all fields. -#. Click *Save*. - The Overview section is displayed. + + |image11| + +#. In the Workspace select *CREATE NEW VSP*. + + |image21| + +#. Complete all fields. +#. Click *Create*. + The Overview page is shown + + |image22| .. note:: A warning is displayed under License Agreement if the VSP does not have an associated license. -#. Click *Software Product Details* (left pane). +#. Click *General* in the left section. - |image8| +#. For the defined Vendor, select a licensing version, a license agreement, + and one or more feature groups. + + |image23| -#. In order, select a licensing version, a license agreement, and one or more - feature groups. #. [Optional] Complete other fields, such as Availability (high-availability zones) and Storage Data Replication (requirement for storage replication), as required. -#. In Software Product Attachments (right pane), click *Select file*. +#. In the *Overview* section, select *Software Product Attachments* + (right pane), click *Select file*. #. In case of a VNF HEAT file: Locate the Heat .zip package and click *Open*. In case of a VNF or PNF CSAR file: Locate the VNF or PNF csar/.zip package and click *Open*. -#. SDC validates the files in the package. After successful validation, SDC +#. The file is loaded and the attachments page opens + + |image24| + +#. Press the Button *Procees to Validation*. After successful validation, SDC displays the files and a success message. If validation fails, SDC displays the errors in the files. @@ -198,8 +220,9 @@ for VFs/PNFs. |image9| -#. Click *Check In* to save the changes. #. Click *Submit* to add the VSP to the catalog. + + After filling a comment, press *Commit&Submit*. #. A success message is displayed. If the VSP attachments contain errors, an error message is displayed instead. Fix the issue(s) and re-submit. #. To configure VFCs associated with the VSP, see @@ -223,9 +246,18 @@ on the Components tab. (see `Create a Vendor Software Product`_). #. From the SDC HOME page, click *ONBOARD* and search for a VSP. -#. In the Overview section, click *Check Out*. -#. In Components (bottom pane), click a VFC (VSP component). - The component links display in the left pane. +#. Selecting the VSP opens the *Versions* page. + + |image25| + +#. Press the + at *Create New Version* on the version to update + + |image26| + +#. Fill the fields and press *Create* +#. In Components , click a VFC (VSP component). + + The component links display in the left pane. #. Click *General* to view and edit general parameters such as hypervisor, image format, VM recovery details, and DNS configuration. #. Click *Compute* to view and edit VM parameters such as the number of VMs @@ -244,12 +276,15 @@ on the Components tab. #. Click *Storage* to configure storage information, such as backup type, storage size, and logging. #. Click *Process Details*, click *Add Component Process Details*, and complete - the Create New Process Details dialog box. Use Process Details to identify + the *Create New Process Details* dialog box. + + Use Process Details to identify the processes and configuration associated with VFCs. #. Click *Monitoring* to upload MIB or JSON files for SNMP traps and polling. -#. Click *Overview* and click *Check In* to save changes. -#. If updating a VSP, click *Submit*. If this procedure is performed during the - workflow to create a VSP, there is no need to click *Submit* now. +#. To update the VSP, click *Submit* + + After filling a comment, press *Commit&Submit* and the + new version is certified. .. _doc_guide_user_des_res-onb_upd-vsp: @@ -262,7 +297,15 @@ Upload a new onboarding package to a VSP. Afterward, update the VF/PNF and servi (see `Create a Vendor Software Product`_). #. From the SDC HOME page, click *ONBOARD* and search for a VSP. -#. In the Overview section, click *Check Out*. +#. Selecting the VSP opens the *Versions* page. + + |image25| + +#. Press the + at *Create New Version* on the version to update + + |image26| + +#. Fill the fields and press *Create* #. In Software Product Attachments (right pane), click *Select file*. #. In case of a VNF HEAT file: Locate the Heat .zip package and click *Open*. @@ -271,17 +314,21 @@ Upload a new onboarding package to a VSP. Afterward, update the VF/PNF and servi SDC warns that uploading a new package erases existing data. #. Click *Continue* to upload the new package. - SDC validates the files in the package. After successful validation, SDC - displays the files and a success message. If validation fails, SDC displays - the errors in the files. +#. The file is loaded and the attachments page opens - .. note:: - If the Heat template contains errors, contact the Certification Group for - guidance on how to proceed. -#. Click *Check In* to save changes. -#. Click *Submit* to add the VSP to the catalog. - A success message is displayed. If the VSP attachments contain errors, an - error message is displayed instead. Fix the issue(s) and re-submit. + |image24| + +#. Press the Button *Procees to Validation*. After successful validation, SDC + displays the files and a success message. If validation fails, SDC displays + the errors in the files. + + Example Heat errors: + + |image9| + +#. Click *Submit* to add the new VSP version to the catalog. + After filling a comment, press *Commit&Submit* and the + new version is certified. #. After updating the VSP: #. Upload the VSP to the Vf/PNF @@ -336,3 +383,25 @@ the *cert* block in the following values file:: .. |image9| image:: media/sdro-design_onboardvsp_heaterrors.png .. |image10| image:: media/sdro-edit-nic.png + +.. |image11| image:: media/sdro-new-vlm.png + +.. |image12| image:: media/sdro-new-vlm-dialog.png + +.. |image13| image:: media/sdro-new-vlm-overview.png + +.. |image14| image:: media/sdro-license-model.png + +.. |image15| image:: media/sdro-license-model-submit.png + +.. |image21| image:: media/sdro-new-vsp.png + +.. |image22| image:: media/sdro-new-vsp-overview.png + +.. |image23| image:: media/sdro-new-vsp-general.png + +.. |image24| image:: media/sdro-new-vsp-attachments.png + +.. |image25| image:: media/sdro-vsp-version.png + +.. |image26| image:: media/sdro-vsp-version-dialog.png
\ No newline at end of file diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png Binary files differindex 94a6743ed..9429683b0 100644 --- a/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png Binary files differindex 2db64c40b..28d361b45 100644 --- a/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png Binary files differindex 20fee24c0..db56087f7 100644 --- a/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png Binary files differindex 9f4f1b408..fcc194d49 100644 --- a/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png Binary files differindex ef99406d9..a1cd74d5c 100644 --- a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png Binary files differindex c8f293401..ed1e7ac35 100644 --- a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-model-submit.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-model-submit.png Binary files differnew file mode 100644 index 000000000..382fca684 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-model-submit.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-model.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-model.png Binary files differnew file mode 100644 index 000000000..cbc5a0e8a --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-model.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm-dialog.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm-dialog.png Binary files differnew file mode 100644 index 000000000..91a1cf041 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm-dialog.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm-overview.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm-overview.png Binary files differnew file mode 100644 index 000000000..09dba66b7 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm-overview.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm.png Binary files differnew file mode 100644 index 000000000..141f7b2dd --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vlm.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-attachments.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-attachments.png Binary files differnew file mode 100644 index 000000000..ae986acf8 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-attachments.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-general.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-general.png Binary files differnew file mode 100644 index 000000000..11bc97862 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-general.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-overview.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-overview.png Binary files differnew file mode 100644 index 000000000..03684e548 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp-overview.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp.png Binary files differnew file mode 100644 index 000000000..04841577c --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-new-vsp.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-version-dialog.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-version-dialog.png Binary files differnew file mode 100644 index 000000000..be2901016 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-version-dialog.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-version.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-version.png Binary files differnew file mode 100644 index 000000000..e73ddf151 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-version.png diff --git a/docs/guides/onap-user/design/service-design/index.rst b/docs/guides/onap-user/design/service-design/index.rst index 4a68a9c6c..fc290cb27 100644 --- a/docs/guides/onap-user/design/service-design/index.rst +++ b/docs/guides/onap-user/design/service-design/index.rst @@ -12,7 +12,7 @@ instantiate, and manage services. Validate and certify the services. **Tool:** SDC -**SDC user roles:** Designer, Tester +**SDC user roles:** Designer |image1| @@ -20,34 +20,37 @@ instantiate, and manage services. Validate and certify the services. **Steps** - #. `Create a Service`_ - #. `Create a Workflow [optional]`_ + #. `Create Service`_ + #. `Create a Management Workflow [optional]`_ #. `Create a Network Callflow [optional]`_ - #. `Select VID Inputs [optional]`_ - #. `Update a Service [optional]`_ - #. `Submit a Service for Testing`_ - #. `Test a Service`_ - #. `Assign an IP Address Plan`_ + #. `Add Service Inputs [optional]`_ + #. `Update Service [optional]`_ + #. `Certify Service`_ -Create a Service ----------------- +.. _doc_guide_user_des_ser-cre_serv: -**Prerequisites:** Create VFs required for this service (see :ref:`doc_guide_user_des_vf-cre`). +Create Service +-------------- + +**Prerequisites:** Create VF/PNFs required for this service (see :ref:`doc_guide_user_des_vf-cre`). + +#. From the SDC HOME page, hover over Add and select *ADD SERVICE*. + + |image0| -#. From the SDC HOME page, hover over Add and select Add Service. #. In the General section, complete all fields. - Note: Use the letters "Svc" in the name to indicate that the - component is a service. + |image5| #. Click Create. - A message displays when VF creation is complete. + A message displays when Service creation is complete. #. Click Composition. - For a description of the Composition section (see \ `Composition - (Service design) <https://wiki.onap.org/x/lIwP>`__ ). + |image6| + + For a description of the Composition section (see SDC User Guide ). #. Drag one or more elements from the Elements palette to the canvas. #. To connect elements: @@ -62,7 +65,7 @@ Create a Service #. To add artifacts at the service level: - #. Click an empty area in the canvas and click Deployment Artifacts + #. Click an empty area in the canvas and click *Deployment Artifacts* (right pane). #. Click \ |image3|. #. Select the type. @@ -72,41 +75,50 @@ Create a Service Use this function to add YANG artifacts for distribution to SDNC. -#. Click Check In to save changes. +#. [Optional] At any time before checking in the Service, click + these options to update Service information: + + .. note:: These tasks can be done only before certifying the Service. + + - **General->Icon** change the icon associated with the Service + - **TOSCA Artifacts** view and edit artifacts, such as the .csar file + and TOSCA template + - **Composition** view or edit the graphical representation of the + service-level TOSCA model + - **Activity Log** view activity related to the Service + (displays the action, date, user, status, and any comments related to each + action) + - **Management Workflow** model service lifecycle workflows for execution + in SO (see `Create a Management Workflow [optional]`_) + - **Network Call Flow** model interactions among VFs (see `Create a + Network Callflow [optional]`_) + - **Deployment** view HEAT modules in VSPs + - **Properties Assignment** define or update properties, + policies and input parameters used during Service instantiation + (see `Add Service Inputs [optional]`_). + - **Monitoring** ... + +#. Click *Check In* to save changes. A box displays for confirming the changes. #. Enter a comment and click OK. - A message displays when the VF is checked in. + A message displays when the Service is checked in and the + Home page is displayed. -#. [Optional] At any time before submitting the service for testing, - click these options to update service information: - - - Icon — change the icon associated with the service - - TOSCA Artifacts — view and edit artifacts, such as the .csar file - and TOSCA template - - Composition — view or edit the graphical representation of the - service-level TOSCA model - - Activity Log — view activity related to the service - - Workflow — model service lifecycle workflows for execution in SO - (see `Create a Workflow [optional]`_) - - Network Call Flow — model interactions among VFs (see `Create a - Network Callflow [optional]`_) - - Deployment — view HEAT modules in VSPs - - Inputs — select parameters as input fields during VID - instantiation (see `Select VID Inputs [optional]`_). +#. After creating a service and configuring optional fields, certify it + (see `Certify Service`_). -#. After creating a service and configuring optional fields, submit it - for testing (see `Submit a Service for Testing`_). - -Note: Create Service can now be invoked via External SDC API also. +Note: Create Service can also be invoked via External SDC API. Refer SDC REST API reference for details of the API. Currently, only a 'Partner Domain Service' category is supported which cannot be created manually from SDC portal. -Create a Workflow [optional] ----------------------------- +.. _doc_guide_user_des_ser-cre_wf: + +Create a Management Workflow [optional] +--------------------------------------- Create a workflow to model the SO recipes of the service life cycle such as instantiation, upgrade, termination, or suspension of a service or @@ -120,11 +132,16 @@ format and included in distributed service model. **Prerequisites:** All the required ActivitySpec as supported by SO are registered in SDC. -#. From the SDC HOME page, click WORKFLOW. -#. Click Add Workflow. -#. The Create New Workflow box displays. +#. From the SDC HOME page, click CATALOG and search for a service. +#. Click the service and click *Check Out*. +#. Select the panel *Management Workflow*. +#. Click *Add Workflow*. +#. The *Create New Workflow* box displays. #. Complete all fields. #. Click Create. + + |image7| + #. Specify Inputs & Outputs of Workflow #. Define the Composition of Workflow. @@ -138,6 +155,8 @@ format and included in distributed service model. #. Click Save. #. Certify the Workflow. +.. _doc_guide_user_des_ser-cre_nfw: + Create a Network Callflow [optional] ------------------------------------ @@ -148,10 +167,10 @@ being consumed. In the model, lifelines represent VFs. Note: The information collected in this section is not distributed with the service model. -**Prerequisites:** `Create a service`_ +**Prerequisites:** `Create service`_ -#. From the SDC HOME page, click CATALOG and search for a service. -#. Click the service and click Check Out. +#. From the SDC HOME page, click CATALOG and search for the service. +#. Click the service and click *Check Out*. #. Click Network Call Flow. #. Click Add Workflow. The Create New Workflow box displays. @@ -182,35 +201,44 @@ the service model. #. [Optional] Change the order of steps by clicking a step and dragging it to the preferred position. -#. Click Save. -#. Click Check In to save changes. +#. Click *Save*. +#. Click *Check In* to save changes. + +.. _doc_guide_user_des_ser-para_in: -Select VID Inputs [optional] ----------------------------- +Add Service Inputs [optional] +----------------------------- -Select parameters as input fields during -`VID <https://wiki.onap.org/display/DW/Glossary#Glossary-VID>`__ -instantiation. +Select parameters as input fields during Service instantiation. -Note: For questions about how to use this section, contact the Service -Design and Creation team (see \ `Mailing -Lists <https://wiki.onap.org/display/DW/Mailing+Lists>`__). -**Prerequisites:** `Create a service`_ +**Prerequisites:** `Create service`_ #. From the SDC HOME page, click CATALOG and search for a service. -#. Click the service and click Check Out. -#. Click Inputs. -#. From the Resource instance inputs pane, expand the name of a - resource. -#. Select inputs by clicking the check box in each row as required. +#. Click the service and click *Check Out*. +#. Click *Properties Assignment*. + + |image8| + +#. From the *Composition* pane, select the *SELF* object + representing the service. +#. In the *Properties* the existing Service properites are shown +#. With *+Add Property* you can add a new property +#. To set a property as *Input* parameter, select the parameter + by clicking the check box in each row as required. Note: Do not select inputs that are already in the ENV file (this overwrites values specified in the ENV). -#. Click \ |image4| to move selected inputs to the Service inputs pane. -#. Click Check In to save changes. -Update a Service [optional] ---------------------------- + |image9| + +#. Click *Declare Input* to add the selected parameter to the + Service *Input* pane. +#. Click *Check In* to save changes. + +.. _doc_guide_user_des_ser-upd_serv: + +Update Service [optional] +------------------------- Update service information and artifacts. @@ -220,85 +248,72 @@ updated (see step 4). **Prerequisites:** - Create a service. -- If a VF included in the service was updated: see "Update a VF - [optional]" and "Test a VF". +- If a VF included in the service was updated: + see :ref:`doc_guide_user_des_vf-cre_vf-upd` -#. From the SDC HOME page, click CATALOG and search for a service. -#. Click the service and click Check Out. +#. From the SDC HOME page, click CATALOG and search for the service. +#. Click the service and click *Check Out*. #. Click Composition. #. To update the version of a VF referenced in the service: #. Click Composition. #. Click the VF in the canvas. - #. On the General Info tab (right pane), select the VF version. + #. On the *General Info* tab (right pane), select the VF version. #. To update artifacts at the service level: - #. Click an empty area in the canvas and click Deployment Artifacts + #. Click an empty area in the canvas and click *Deployment Artifacts* (right pane). #. View, add, delete, or download artifacts as required. #. [Optional] Add, edit, or remove VFs that comprise the service - reference architecture (see steps 4 to 6 in \ `Create a Service`_). -#. [Optional] Click Operations to edit Service Operations. + reference architecture (see steps 4 to 6 in \ `Create Service`_). +#. [Optional] Click *Operations* to edit Service Operations. #. Create/Edit Operations #. Assign Workflow #. Click Save -#. [Optional] Click Management Callflow to edit, upload, or delete - associated deployment artifacts (see "Create a Management Workflow [optional]"). -#. [Optional] Click Network Callflow to edit the interactions among VFs +#. [Optional] Click *Management Workflow* to edit, upload, or delete + associated deployment artifacts + (see `Create a Management Workflow [optional]`_). +#. [Optional] Click *Network Callflow* to edit the interactions among VFs that comprise the service (see `Create a Network Callflow [optional]`_). -#. [Optional] Click Inputs to select parameters as input fields during - VID instantiation (see `Select VID Inputs [optional]`_). -#. Click Check In to save changes. -#. After updating a service and configuring optional fields, submit it - for testing (see `Submit a Service for Testing`_). +#. [Optional] Click *Properties Assignement* to select parameters as + input fields during Service instantiation + (see `Add Service Inputs [optional]`_). +#. Click *Check In* to save changes. +#. After updating a service and configuring optional fields, certify it + (see `Certify Service`_). -Submit a Service for Testing ----------------------------- +.. _doc_guide_user_des_ser-cfy_serv: + +Certify Service +--------------- Note: A service cannot be submitted for testing if the reference architecture contains uncertified resources. -**Prerequisites:** `Create a Service`_ - -#. When a service is ready for testing, click CATALOG and search for the - service. -#. Click the service and click Submit for Testing. - A box displays for sending a message to the testers. -#. Enter a message for the testers asking that they begin service - certification and click OK. - - The default mail client launches with a draft email containing the - message from step 2. - -#. Add the email addresses of the people on the Certification Group with - the Tester role and send the email. +**Prerequisites:** `Create Service`_ -Test a Service --------------- - -Test the design and associated artifacts of a service. +**Steps** -**Prerequisites:** `Submit a Service for Testing`_. +#. When a Service is ready for certification, + click *CATALOG* and search for the checked-in Service. +#. Click the Service and click *Certify*. -#. Sign in to SDC as a Tester. -#. From the HOME page, select Ready For Testing under Active Projects. -#. In the right pane, click the service to test. -#. Click Start Testing. -#. Test the service. -#. When testing is complete, click Accept. +#. Enter a comment and click *OK*. -Assign an IP Address Plan -------------------------- +#. A Message appears, that the Service is certified. -Assigning an IP address plan is specific to each OpenECOMP installation. -The object: to assign a Service's key to a "plan" for allocating IP -addresses. -.. |image1| image:: media/design_service_workflow.png +.. |image0| image:: media/sdc-home.png +.. |image1| image:: media/sdc-service-workflow.png .. |image2| image:: media/design_asdccanvas_connect_elements.png .. |image3| image:: media/design_service_adddeploymentartifact.png .. |image4| image:: media/design_service_inputs_move.png +.. |image5| image:: media/sdc-service-general.png +.. |image6| image:: media/sdc-service-composition.png +.. |image7| image:: media/sdc-service-workflow.png +.. |image8| image:: media/sdc-service-properties.png +.. |image9| image:: media/sdc-service-properties-input.png
\ No newline at end of file diff --git a/docs/guides/onap-user/design/service-design/media/sdc-home.png b/docs/guides/onap-user/design/service-design/media/sdc-home.png Binary files differnew file mode 100644 index 000000000..3b14c99e0 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-home.png diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png b/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png Binary files differnew file mode 100644 index 000000000..4ac0d490c --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-general.png b/docs/guides/onap-user/design/service-design/media/sdc-service-general.png Binary files differnew file mode 100644 index 000000000..4bb65d71e --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-service-general.png diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png b/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png Binary files differnew file mode 100644 index 000000000..2296fd350 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png b/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png Binary files differnew file mode 100644 index 000000000..0dc111eac --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png Binary files differnew file mode 100644 index 000000000..03867f954 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png Binary files differnew file mode 100644 index 000000000..7caf98122 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png diff --git a/docs/guides/onap-user/design/service-distribution/index.rst b/docs/guides/onap-user/design/service-distribution/index.rst index 8de0e9232..fbd0d1b29 100644 --- a/docs/guides/onap-user/design/service-distribution/index.rst +++ b/docs/guides/onap-user/design/service-distribution/index.rst @@ -4,126 +4,82 @@ .. _doc_guide_user_des_ser-dis: -Governance Approval and Service Distribution -============================================ +Service Distribution +==================== Each ONAP platform operator will have a specific set of policies and procedures for approving Services and deploying them in the operator's ONAP environment. This outline describes the general flow of such procedures. -**Goal:** Add all information required to create, instantiate, and -manage a service. +**Goal:** Add all information required to create, instantiate, and +manage a service in Runtime. -**Tools:** SDC +**Tools:** SDC -**SDC user roles:** Governor, Ops +**SDC user roles:** Designer -Steps ------ - -- `Review a Service for Governance Approval`_ -- `Request Service Distribution`_ -- `Distribute a Service`_ -- `Verify that the DCAE Blueprint is Deployed`_ |image1| -**Figure 1. Workflow** - -Review a Service for Governance Approval ----------------------------------------- - -A member of the Governance Board performs a governance review of a -certified service and its associated VFs, and then approves (or rejects) -the artifacts for distribution. +**Figure: Workflow for Service Distribution** -**Prerequisites:** Service is tested. - -**Steps** +Steps +----- -#. Sign in to SDC as a Governor. -#. From the HOME page, click CATALOG and select a service that is ready - for governance review. -#. Review the service and its associated resources. -#. To view deployment artifacts: +- `Distribute Service`_ +- `Monitor Distribution`_ +- `Verify that the DCAE Blueprint is Deployed`_ - #. Click *Composition* tab (left pane) and then click the Deployment - Artifact icon (right pane) to see the list of artifacts. - #. Click the download icon adjacent to an artifact to download and - view it. -#. When the review is complete, click: +.. _doc_guide_user_des_ser-dis-start: - - *Accept* if the service passes the governance review. The service is - marked Approved for Distribution. - - *Reject* if the service fails the governance review. The service is - marked Rejected for Distribution. +Distribute Service +------------------ -After a service receives governance approval, it moves into the Waiting -to be Distributed section of the Operations Workspace (Ops role) +**Prerequisites:** The Service is Certified. -Request Service Distribution ----------------------------- +**Steps** -Request service distribution to populate all appropriate ONAP -components with the resources and artifacts ssociated with the service and its -VFs. -**Prerequisites:** +#. Sign in to SDC as Developer. +#. From the SDC HOME page, click CATALOG and search for the service. +#. Select the service that is *Ready for Distribution*. -A service has received governance approval and is -available in the Waiting to be Distributed section of the SDC Operations -Workspace (under the Ops Role). For more information, see -`Review a Service for Governance Approval`_. + |image2| -The steps shown here are generic; each service provider has a different, -specific set of instructions. Contact your site IT support for the -particulars. +#. Review the version history to verify that the correct version is + selected. +#. In the header, click *Distribute*. -**Steps** + The service state changes to *Distributed* +#. Continue with the step `Monitor Distribution`_ -#. Open at ticket request at your site -#. Make a "DISTRIBUTION REQUEST" -#. Provide the following information in your request: - - Environment - - Name of service to be distributed - - Version number - - [Optional] Additional information or instructions (provide special - instructions for the request) - - Your user ID - - [Optional] Alternate Contact user ID (provide an alternate contact - if the primary contact is unavailable) +.. _doc_guide_user_des_ser-dis-mon: -Distribute a Service +Monitor Distribution -------------------- -**Prerequisites:** The service is approved. - **Steps** +#. Sign in to SDC as Developer. +#. From the SDC HOME page, click CATALOG and search for the service. +#. Select the service that is in *Distributed* state. +#. Click *Distribution* in the left pane. + The Distribution Report displays. -#. Sign in to SDC as Ops. -#. In the Active Projects pane (left pane) of the HOME page, select the - W*aiting For Distribution* check box. -#. Select a service that is ready for distribution. -#. Review the version history to verify that the correct version is - selected. -#. In the header, click *Distribute*. - - The service moves from the Ready For Distribution folder to the - Distributed Services folder. + |image3| -#. From the Workspace pane, click *Distributed Services*. - All distributed services display. -#. Select the service distributed in step 5 and click *Monitor*. - The Distribution Report displays. -#. In the Distribution Report, navigate to the Component ID for the +#. In the Distribution Report, navigate to the Distribution ID for the service and click the adjacent down arrow. The report shows all components associated with the service and their - distribution statuses, such as DOWNLOAD_OK. + distribution statuses. #. Review the status of each component. +#. If deploy errors are shown, the reason has to be investigated and the + Service can be *Redistributed* + +.. _doc_guide_user_des_ser-dis-dcae: Verify that the DCAE Blueprint is Deployed ------------------------------------------ @@ -134,4 +90,6 @@ management workflow and configuration description for a given VNF, and it must be available after completing the service distribution process and before beginning the instantiation process. -.. |image1| image:: media/design_governance_workflow.png +.. |image1| image:: media/sdc-service-distribution-workflow.png +.. |image2| image:: media/sdc-service-distribute.png +.. |image3| image:: media/sdc-service-distribute-monitor.png diff --git a/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribute-monitor.png b/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribute-monitor.png Binary files differnew file mode 100644 index 000000000..85c717f26 --- /dev/null +++ b/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribute-monitor.png diff --git a/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribute.png b/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribute.png Binary files differnew file mode 100644 index 000000000..d87385030 --- /dev/null +++ b/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribute.png diff --git a/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribution-workflow.png b/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribution-workflow.png Binary files differnew file mode 100644 index 000000000..16578cbc2 --- /dev/null +++ b/docs/guides/onap-user/design/service-distribution/media/sdc-service-distribution-workflow.png diff --git a/docs/guides/onap-user/design/vfcreation/index.rst b/docs/guides/onap-user/design/vfcreation/index.rst index e3e259c06..14928bbe7 100644 --- a/docs/guides/onap-user/design/vfcreation/index.rst +++ b/docs/guides/onap-user/design/vfcreation/index.rst @@ -11,7 +11,7 @@ service. Validate and certify the VFs/PNFs. **ONAP Component**: SDC -**SDC user roles**: Designer, Tester +**SDC user roles**: Designer |image1| @@ -21,8 +21,7 @@ Steps - `Create a VF/PNF by VSP import`_ - `Create a VF/PNF manually`_ - `Update a VF/PNF [optional]`_ -- `Submit for testing`_ -- `Test a VF/PNF`_ +- `Certify VF/PNF`_ .. _doc_guide_user_des_vf-cre_cre-imp: @@ -46,8 +45,7 @@ Create a VF/PNF by VSP import #. In the General section, complete all fields. - .. note:: Use the letters "VF" or "PNF" in the name to indicate the - component type. + |image10| #. Click *Create*. @@ -55,37 +53,39 @@ Create a VF/PNF by VSP import 10 minutes.) - A message displays when creation is complete. -#. Click *Check In* to save changes. - - - A box displays for confirming the changes. - -#. Enter a comment and click *OK*. - - A message displays when the VF/PNF is checked in. - -#. [Optional] At any time before submitting the VF/PNF for testing, click +#. [Optional] At any time before checking in the VF/PNF, click these options to update VF/PNF information: - .. note:: These tasks can be done only before submitting the VF/PNF for testing. + .. note:: These tasks can be done only before certifying the VF/PNF. - - **Icon** change the icon associated with the VF/PNF (vendor-supplied icons - are preferred) + - **General->Icon** change the icon associated with the VF/PNF + (vendor-supplied icons are preferred) - **Deployment Artifacts** download, view, modify, or change deployment artifacts (for example, the contents of the Heat .zip file, which contains - the Heat volume template, the license, etc.) - - **Information Artifacts** view or upload artifacts, such as test scripts, test - results, or the AIC questionnaire + the Heat volume template, the license, CDS Blueprints,...) + - **Information Artifacts** view or upload artifacts, such as test + scripts, test results, or the AIC questionnaire - **TOSCA Artifacts** view or upload the TOSCA model or the TOSCA template - - **Properties** define or update properties - **Composition** view or edit the graphical representation of the resource-level TOSCA model (generated from the Heat template) - **Activity Log** view activity related to assets associated with the VF/PNF (displays the action, date, user, status, and any comments related to each action) - **Deployment** view VF modules defined in the Heat template - - **Inputs** view inputs defined for the resource-level TOSCA model + - **Properties Assignment** define or update properties and input parameters + and policies + - **Req.& Capabilities** view and add requirements and capabilities + +#. Click *Check In* to save changes. -#. After creating a VF/PNF, submit it for testing (see `Submit for testing`_). + - A box to enter comments for confirming the changes open. + +#. Enter a comment and click *OK*. + + - A message displays when the VF/PNF is checked in and you are redirected + to the Home screen. +#. After creating and checking a VF/PNF, certify it (see `Certify VF/PNF`_). .. _doc_guide_user_des_vf-cre_cre-man: @@ -94,33 +94,34 @@ Create a VF/PNF manually **Steps** -#. From the SDC HOME page, click the *Add VF* or *Add PNF* +#. From the SDC HOME page, click the *ADD VF* or *ADD PNF* - |image9| + |image2| #. In the General section, complete all fields. -#. Before submitting the VF/PNF for testing, click these +#. Before check-in the VF/PNF, click these options to update VF/PNF information: - .. note:: These tasks can be done only before submitting the VF/PNF for testing. + .. note:: These tasks can be done only before certifying the VF/PNF. - - **Icon** change the icon associated with the VF/PNF (vendor-supplied icons are - preferred) - - **Deployment Artifacts** download, view, modify, or change VF/PNF deployment + - **General->Icon** change the icon associated with the VF/PNF + (vendor-supplied icons are preferred) + - **Deployment Artifacts** download, view, modify, or change deployment artifacts (for example, the contents of the Heat .zip file, which contains - the Heat volume template, the VF license, etc.) - - **Information Artifacts** view or upload artifacts, such as test scripts, test - results, or the AIC questionnaire - - **TOSCA Artifacts** view or download the TOSCA model or the TOSCA template - - **Properties** define or update properties + the Heat volume template, the license, CDS Blueprints,...) + - **Information Artifacts** view or upload artifacts, such as test + scripts, test results, or the AIC questionnaire + - **TOSCA Artifacts** view or upload the TOSCA model or the TOSCA template - **Composition** view or edit the graphical representation of the resource-level TOSCA model (generated from the Heat template) - **Activity Log** view activity related to assets associated with the VF/PNF (displays the action, date, user, status, and any comments related to each action) - **Deployment** view VF modules defined in the Heat template - - **Inputs** view inputs defined for the resource-level TOSCA model + - **Properties Assignment** define or update properties and input parameters + and policies + - **Req.& Capabilities** view and add requirements and capabilities #. Click *Create*. @@ -130,14 +131,13 @@ Create a VF/PNF manually #. Click *Check In* to save changes. - - A box displays for confirming the changes. + - A box to enter comments for confirming the changes open. #. Enter a comment and click *OK*. - - A message displays when the is checked in. - - -#. After creating a VF/PNF, submit it for testing (see `Submit for testing`_). + - A message displays when the VF/PNF is checked in and you are redirected + to the Home screen. +#. After creating and checking a VF/PNF, certify it (see `Certify VF/PNF`_). .. _doc_guide_user_des_vf-cre_vf-upd: @@ -146,8 +146,9 @@ Update a VF/PNF [optional] -------------------------- - Update the VSP and other artifacts in a VF/PNF. -- Upload a new version the VSP to the VF/PNF whenever the VSP is updated (see steps - 3 to 5). Other reasons for updating a VF/PNF include: +- Upload a new version the VSP to the VF/PNF whenever the VSP is updated + (see steps 3 to 5). +- Other reasons for updating a VF/PNF include: - artifact changes at the VF/PNF level that need be uploaded, for example, changes to ENV values (see step 6) @@ -159,20 +160,20 @@ Update a VF/PNF [optional] **Steps** -#. From the SDC HOME page, click *CATALOG* and search for a VF/PNF. +#. From the SDC HOME page, click *CATALOG* and search for the VF/PNF. #. In the General section, click *Check Out*. - The Select VSP field is displays. + The *VSP* field is displays. -#. In the Select VSP field, click *Browse*. - The Import VSP box displays and shows the VSP that was used to create the VF/PNF. +#. In the *VSP* field, click *Browse*. + The *Import VSP* box displays and shows the VSP that was used to create the VF/PNF. #. Expand the VSP field and click. |image4| -#. Click |image5| - A progress bar displays. |image6| +#. Click *Update VSP* + A progress bar displays.|image5| #. Click *Deployment Artifact* to edit, upload, or delete associated [Optional] deployment artifacts. @@ -182,63 +183,48 @@ Update a VF/PNF [optional] #. Click *Check In* to save changes. + - A box to enter comments for confirming the changes open. + +#. Enter a comment and click *OK*. + + - A message displays when the VF/PNF is checked in and you are redirected + to the Home screen. #. After updating the VF/PNF: - - Submit the VF/PNF for testing (see `Submit for testing`_). - - Update the VF/PNF version in any service that contains the VF/PNF - (see step 4 in Update a service [optional]). + - Certify it (see `Certify VF/PNF`_). + - Update the VF/PNF version in any service that contains the VF/PNF, + please go to :ref:`doc_guide_user_des_ser-upd_serv` .. _doc_guide_user_des_vf-cre_sub-tst: -Submit for testing ------------------- +Certify VF/PNF +-------------- **Prerequisites:** `Create a VF/PNF by VSP import`_ or `Create a VF/PNF manually`_ **Steps** -#. When a VF/PNF is ready for testing, click *CATALOG* and service for the - VF/PNF. -#. Click the VF/PNF and click *Submit for Testing*. +#. When a VF/PNF is ready for certification, + click *CATALOG* and search for the checked-in VF/PNF. +#. Click the VF/PNF and click *Certify*. |image7| |image8| -#. Enter a message for the testers asking that they begin service certification - and click *OK*. - - The default mail client launches with a draft email containing the message. - -#. Add the email addresses of the people on the Certification Group for this - site with the *Tester* role and send the email. - -.. _doc_guide_user_des_vf-cre_tst-vf: - -Test a VF/PNF -------------- - -Test the design and artifacts of a VF/PNF. +#. Enter a comment and click *OK*. -**Prerequisites:** `Submit for testing`_ +#. A Message appears, that the VF/PNF is certified. -**Steps** -#. Sign in to SDC as a *Tester*. -#. From the HOME page, select *Ready For Testing* under Active Projects. -#. In the right pane, click the VF/PNF. -#. Click *Start Testing*. -#. Test the VF/PNF. -#. When testing is complete, click *Accept*. - -.. |image1| image:: media/design_vf_workflow.png -.. |image2| image:: media/SDC-Import.png -.. |image3| image:: media/image2017-1-27_11-14-3.png -.. |image4| image:: media/image2017-1-27_11-17-18.png +.. |image1| image:: media/sdc-vf-workflow.png +.. |image2| image:: media/sdc-home.png +.. |image3| image:: media/sdc-Import.png +.. |image4| image:: media/sdc-vsp-update.png .. |image5| image:: media/sdc_artifact_update.png .. |image6| image:: media/design_vf_updatevspmessage.png -.. |image7| image:: media/image2017-1-27_11-20-13.png -.. |image8| image:: media/image2017-1-27_11-21-4.png +.. |image7| image:: media/sdc-vf-general-certify.png +.. |image8| image:: media/sdc-vf-certify-confirm.png .. |image9| image:: media/SDC-Add.png - +.. |image10| image:: media/sdc-vf-general.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-Import.png b/docs/guides/onap-user/design/vfcreation/media/sdc-Import.png Binary files differnew file mode 100644 index 000000000..e253f2963 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-Import.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-home.png b/docs/guides/onap-user/design/vfcreation/media/sdc-home.png Binary files differnew file mode 100644 index 000000000..3b14c99e0 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-home.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-vf-certify-confirm.png b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-certify-confirm.png Binary files differnew file mode 100644 index 000000000..73ba1d277 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-certify-confirm.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-vf-general-certify.png b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-general-certify.png Binary files differnew file mode 100644 index 000000000..cf87faba9 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-general-certify.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-vf-general.png b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-general.png Binary files differnew file mode 100644 index 000000000..efd6d7d3e --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-general.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-vf-workflow.png b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-workflow.png Binary files differnew file mode 100644 index 000000000..a11f2d23c --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-vf-workflow.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc-vsp-update.png b/docs/guides/onap-user/design/vfcreation/media/sdc-vsp-update.png Binary files differnew file mode 100644 index 000000000..22caa0ad5 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc-vsp-update.png |
