diff options
Diffstat (limited to 'docs/guides/onap-user/design')
34 files changed, 1300 insertions, 0 deletions
diff --git a/docs/guides/onap-user/design/control-loop/index.rst b/docs/guides/onap-user/design/control-loop/index.rst new file mode 100644 index 000000000..a8e77007c --- /dev/null +++ b/docs/guides/onap-user/design/control-loop/index.rst @@ -0,0 +1,271 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2019 ONAP Contributors. All rights reserved. + +Control Loop Design +=================== +**Goal:** Create and distribute closed-loop models for automating: + * recovery of faults reported by traps or alarms + * capacity management as performance thresholds are crossed + +**Tool:** SDC/DCAE-DS/CLAMP + +**SDC user role:** Designer + +Closed loops use feedback to control and optimize their behavior. +A closed loop can proactively respond to network and service conditions +without human intervention. + +There are different phases to the Closed Loop (CL) design: + + #. Design a closed loop template and associate it to a Service, + the template represents the theoretical flow of the CL. (DCAE-DS/SDC) + + #. generate a deployment artifact that can be ingested by the DCAE, + today it is a "cloudify" blueprint. + + #. Distribute the control loop to CLAMP and DCAE, the csar is distributed + to CLAMP, the blueprint is distributed to both CLAMP and DCAE. (SDC) + #. Submit the closed loop, meaning provision Policy/DCAE with + closed loop data. (CLAMP) + #. Deploy the closed loop, it initiates the deployment of the micro + service on DCAE side (CLAMP) + +*Release 1 (Amsterdam)* includes control loop template designer in Clamp UI. + +*Release 2 (Bejing)* does not include the control loop template designer +in Clamp UI, this is implemented in DCAE-DS. + +**Steps** + + * `Design a Model`_ + * `Configure Collector`_ + * `Configure Alarm Detector`_ + * `Configure Data Analytics Function`_ + * `Configure Policy`_ + * `Distribute the Model`_ + * `Open Loop Design`_ + +Design a Model +-------------- + +.. note:: + When required, contact the DCAE Group (see `Mailing Lists <https://wiki.onap.org/display/DW/Mailing+Lists>`_) to + confirm that a blueprint for the Service has been generated and + is available on DCAE. + +**Prerequisites:** Create and test a VF +(see :ref:`VF Creation and Testing <user-guides-service-design>`). + + #. Create and name a new model + #. Associate a Service with the model + #. Based on the service, provide values for its attributes + #. Select the Resource-VF and Resource-VFC to associate with the model + #. Select one or more locations in the cloud where the + closed loop will be deployed + #. Here is a view of a hypothetical visual design tool + showing loop modeling components: + + |image0| + + #. Use the tool to select and connect components, + thus defining the structure of the model + #. Configure each of the components of the model + + #. `Configure Collector`_ + #. `Configure Alarm Detector`_ + #. `Configure Data Analytics Function`_ + #. `Configure Policy`_ + +Configure Collector +------------------- + +**Prerequisites:** `Design a Model`_. + +Using the modeling tool, assign a message topic to which this +component will subscribe. + +Configure Alarm Detector +------------------------ + +**Prerequisites:** `Design a Model`_. + +Using the modeling tool, configure the fields described in this table: + ++------------+----------------------------+-------------------------------+ +| Field | Values | Description | ++============+============================+===============================+ +| Topic | * DCAE-CL-EVENT | DMAAP message topic to | +| Publishes | * OPEN-DCAE-HIGHLANDPARK- | which the component | +| | EVENT-OUTPUT | subscribes. | ++------------+----------------------------+-------------------------------+ +| Alarm | (Multiple values) | Populated from vendor-provided| +| Condition | | list of alarm names. Stored in| +| | | SDC and retrieved by the | +| | | modeling tool. Alarms differ | +| | | per VNF. | ++------------+----------------------------+-------------------------------+ +| Event | (Multiple values) | Categories of alarms for a VNF| +| Source Type| | .Differs per VNF. | ++------------+----------------------------+-------------------------------+ +| Event | * NORMAL | Severity level of the alarm | +| Severity | * not-NORMAL | that caused the rule to match.| +| | * WARNING | All conditions are exact | +| | * MINOR | matches, except for not-Normal| +| | * MAYOR | , which matches anything | +| | * CRITICAL | except NORMAL. | ++------------+----------------------------+-------------------------------+ + + +Configure Data Analytics Function +--------------------------------- + +**Prerequisites:** `Design a Model`_. + + #. In the model, click the *StringMatch*. + #. Click the *Properties* icon. + #. Configure fields as required (see table). + #. Click *Close*. + ++------------+----------------------------+-------------------------------+ +| Field | Values | Description | ++============+============================+===============================+ +| Topic | * DCAE-CL-EVENT | DMAAP message topic to | +| Publishes | | which the component subscribes| ++------------+----------------------------+-------------------------------+ +| AAI Fields | (Multiple values) | Additional VM-related fields | +| Matching | | that downstream elements such | ++------------+ | as Policy and APPC can use to | +| AAI Field | | take action on the signature. | +| Send | | | +| (Select | | | +| Multiple) | | | ++------------+----------------------------+-------------------------------+ +| Resource- | Integer | Group of string matching rules| +| Group | | that are to be treated | +| | | together. For example, a | +| | | resource group could contain | +| | | two different traps that must | +| | | be received to produce a | +| | | signature, as well as the | +| | | abatement match. | ++------------+----------------------------+-------------------------------+ +| Alarm | (Multiple values) | Populated from vendor-provided| +| Condition | | list of alarm names. Stored in| +| | | SDC and retrieved by the | +| | | modeling tool. Alarms differ | +| | | per VNF. | ++------------+----------------------------+-------------------------------+ +| Event | * NORMAL | Severity level of the alarm | +| Severity | * not-NORMAL | that caused the rule to match.| +| | * WARNING | All conditions are exact | +| | * MINOR | matches, except for not-Normal| +| | * MAYOR | , which matches anything | +| | * CRITICAL | except NORMAL. | ++------------+----------------------------+-------------------------------+ +| Event | (Multiple values) | Categories of alarms for a | +| Source Type| | VNF. Differs per VNF. | ++------------+----------------------------+-------------------------------+ +| Time | Integer | Interval during which multiple| +| Window | | traps must be received in | +| | | order to produce a single | +| | | signature. This value has no | +| | | meaning if only one onset rule| +| | | exists. A value of 0 means an | +| | | unlimited time window. | ++------------+----------------------------+-------------------------------+ +| Age | Integer | Traps older than this limit | +| Limit | | are deemed too stale to be | +| | | meaningful and are not | +| | | processed. | ++------------+----------------------------+-------------------------------+ +| Create CL | * Initial | *Initial:* start a closed | +| Event ID | * Close | loop with a new request ID | +| | | | +| | | *Close:* end an existing | +| | | closed loop (Close) | ++------------+----------------------------+-------------------------------+ +| Create CL | * OnSet | *OnSet:* start a closed loop | +| Event ID | * Abatement | when a condition starts. | +| Output | | Triggered with a new | +| Event Name | | request_id and signature flag | +| | | of *Initial* | +| | | | +| | | *Abatement:* end a closed loop| +| | | when a condition is corrected.| +| | | Triggered with signature flag | +| | | of *Close*. | ++------------+----------------------------+-------------------------------+ + + +Configure Policy +---------------- + +Use this task to configure the operational policy of the closed loop. + +**Prerequisites:** `Design a Model`_. + +Model configuration involves setting the values in this table, +for each of the Rebuild and Migrate recipies in the model. + ++------------+----------------------------+-------------------------------+ +| Field | Values | Description | ++============+============================+===============================+ +| Overall | Integer | Maximum overall time that can | +| Time Limit | | be spent on attempting all | +| | | actions. | ++------------+----------------------------+-------------------------------+ +| Receipe | * Restart | The automated action to be | +| | * Rebuild | triggered on the VM by the | +| | * Migrate | closed loop. | ++------------+----------------------------+-------------------------------+ +| Max Retries| Positive Integer | Number of times this action | +| | | should be attempted before | +| | | failing on MaxRetriesExceeded.| ++------------+----------------------------+-------------------------------+ +| Retry Time | Positive Integer | Maximum amount of time to take| +| Limit | | performing retries before | +| | | failing on TimeLimitExceeded. | ++------------+----------------------------+-------------------------------+ +| Parent | (Selection | Recipe that precedes this one | +| Policy | | in the chain of operations. | +| | | If this is the first action in| +| | | the chain, this field is not | +| | | set. | ++------------+----------------------------+-------------------------------+ +| Parent | * Failure: | Types of results from the | +| Policy | MaxRetriesExceeded | previous action on the chain | +| Conditions | * Failure: | that would cause a transition | +| | TimeLimitExceeded | to this action. | +| | * Failure: Exception | | +| | * Failure: Other | | +| | * Success | | ++------------+----------------------------+-------------------------------+ + + +Distribute the Model +-------------------- + +**Prerequisites:** `Design a Model`_. + +In this step, the user distributes the models to the DCAE and +Policy subsystems of ONAP. + +After a model is uploaded to a VNF, the status icon of the VNF changes +to from "Design" to "Activated" in the ONAP Portal GUI. + +Open Loop Design +---------------- + +Create and distribute open control loops for managing VF faults and +performance after instantiation. + +With open loop control systems, the action(s) taken by the Policy do +not affect the output of the system. + +For information about creating policy using the Policy Designer, +see :ref:`Policy Design <user-guides-service-design>`. + + +.. |image0| image:: media/DesignModel.png + diff --git a/docs/guides/onap-user/design/control-loop/media/DesignModel.png b/docs/guides/onap-user/design/control-loop/media/DesignModel.png Binary files differnew file mode 100644 index 000000000..a7cac4f88 --- /dev/null +++ b/docs/guides/onap-user/design/control-loop/media/DesignModel.png diff --git a/docs/guides/onap-user/design/index.rst b/docs/guides/onap-user/design/index.rst new file mode 100644 index 000000000..28a808ba5 --- /dev/null +++ b/docs/guides/onap-user/design/index.rst @@ -0,0 +1,41 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2017 AT&T Intellectual Property. All rights reserved. + +Design +====== + +The goal of the design process is to create all artifacts (models) +that are required to instantiate and manage resources, services, +and products on the ONAP platform. The design process requires +input from users with multiple roles. + +Design progresses logically through a series of phases. Each phase: + +* is organized into steps that are completed in sequence + +* is accessed using a different role with specific responsibilities + generates artifacts that are used in other phases of design or when + instantiating or monitoring virtual functions. + +Design includes the following topics: + +.. toctree:: + :maxdepth: 1 + :titlesonly: + + Pre-Onboarding <./pre-onboarding/index.rst> + + Resource-Onboarding <./resource-onboarding/index.rst> + + VF Creation and Testing <./vfcreation/index.rst> + + Service Design <./service-design/index.rst> + + Governance Approval and Service Distribution <./service-distribution/index.rst> + + Control Loop Design <./control-loop/index.rst> + +* `Policy Design <https://wiki.onap.org/x/SYAP>`_ + +* `SDC Artifacts List <https://wiki.onap.org/x/LYAP>`_ diff --git a/docs/guides/onap-user/design/pre-onboarding/index.rst b/docs/guides/onap-user/design/pre-onboarding/index.rst new file mode 100644 index 000000000..155ec56fb --- /dev/null +++ b/docs/guides/onap-user/design/pre-onboarding/index.rst @@ -0,0 +1,126 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2019 ONAP Contributors. All rights reserved. + +Pre-Onboarding +============== + + * `Create a Tenant`_ + * `Validate VFs (Virtual Functions)`_ + * `Generate Manifest and Package Artifacts`_ + +Create a Tenant +--------------- + +Each service requires a tenant_ (a group of users who share a common access) +in which resources are stored in the cloud. This process is performed using +facilities of the network cloud, outside of ONAP. Confirm that the tenant is +created and note the tenant ID. + +ONAP admin users can configure a cloud-owner to add new cloud resources. +These are the computing and networking resources, that will support +running VNFs. A cloud-owner holds a keystone URL, login, region and +password, in the case of an Openstack cluster. A cloud-owner also +belongs to a region. The region name should be the same as the Openstack +region. Prior to creation of a cloud-owner, its region must be created +first. Multiple tenants can share the same cloud-owner. Note that these +tenants are ONAP tenants, not Openstack tenants. Tenant register +services that customers are allowed to deploy. Finally, the customer is +like an instance of the tenant. + +Note: there is no GUI (yet) to configure these objects. REST requests +are sent to AAI to achieve the configuration. For a detailed list of +required REST commands see: + +https://wiki.onap.org/display/DW/running+vFW+Demo+on+ONAP+Amsterdam+Release + +The overall process is as follows: + + #. Create a region and a cloud-owner. This steps registers Openstack + credentials. This is the only step requiring entering Openstack specific + parameters. + + #. Create a complex. The complex describes the coverage of the region with + a street address etc. + + #. Create a service. The service name should match the name of the service + onboarded in SDC. + + #. Create a tenant. Tenant in ONAP stores a design for a generic customer. + + #. Associate tenants with their allowed services. + + #. Create an instance of the tenant or customer. The customer is visible in + VID. A VID user can deploy allowed services on this new customer. + + |image1| + + +Validate VFs (Virtual Functions) +-------------------------------- + +Prior to resource onboarding, the Certification Group does the following: + + - onboards the Heat template(s) and metadata to the SDC catalog + - creates a test VF + - runs the Heat scanning tools + - shares the results with any group that approves Virtual Functions + +In parallel, the Certification Group onboards the VF Image and OS to a +standalone ONAP instance (the "sandbox") and performs the following: + + - security scan + - compatibility test for the OS and vendor binary + - malware scan + +The Certification group then instantiates the VF image using the vendor +Heat (if provided) in order to validate that the VM can run on the Network +Cloud. + +No VF functionality testing is performed at this stage. + + +Generate Manifest and Package Artifacts +--------------------------------------- + +Before onboarding resources, run generate-manifest.py to generate a +MANIFEST file. These steps are performed outside SDC. + +OBSOLETE: **Prerequisites:** Obtain Heat/ENV files and other files required for +onboarding. See the reference document `VNF Heat Template Requirements +for OpenECOMP <https://wiki.onap.org/download/attachments/1015849/VNF%20Heat%20Template%20Requirements%20for%20OpenECOMP.pdf?version=2&modificationDate=1487262292000&api=v2>`__ for details. + +UPDATE: see VNF Modeling Requirements / HEAT: https://onap.readthedocs.io/en/casablanca/submodules/vnfrqts/requirements.git/docs/Chapter5/Heat/index.html + +#. Put the Heat, ENV, nested Heat, and other files used by get-file in templates + in a directory. + + Naming guidelines: + + - The base Heat should include "base" in the name. + - The ENV file name should match the name of the Heat file with which it + is associated. + - All get-file file names need to be unique. + +#. Put the python script in a directory one level above the directory that + contains the Heat/ENV and other files. + + For example, [dir x]/[dir y] + + - [dir y] contains the Heat/ENV files and other files + - [dir x] contains the python script + +#. Run the script on the Windows command line: + + .. code-block:: + + python generate-manifest.py -f "dir y" + +#. Examine the manifest file and confirm that is correct. + +#. Package all Heat/ENV files, all other files, and the MANIFEST.json + into one .zip file. + + +.. |image1| image:: media/tenant.png +.. _tenant: https://wiki.onap.org/display/DW/Glossary#Glossary-tenant diff --git a/docs/guides/onap-user/design/pre-onboarding/media/tenant.png b/docs/guides/onap-user/design/pre-onboarding/media/tenant.png Binary files differnew file mode 100644 index 000000000..b5ae8c678 --- /dev/null +++ b/docs/guides/onap-user/design/pre-onboarding/media/tenant.png diff --git a/docs/guides/onap-user/design/resource-onboarding/index.rst b/docs/guides/onap-user/design/resource-onboarding/index.rst new file mode 100644 index 000000000..4a3cbc1e3 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/index.rst @@ -0,0 +1,250 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2019 ONAP Contributors. All rights reserved. + +Resource Onboarding +=================== +**Goal:** Add models and other artifacts required to create, configure, instantiate, and manage a VF and, optionally, a VFC. + +**Tool:** SDC + +**SDC user role:** Designer + +|image0| + +**Steps** + * `Create a License Model`_ + * `Create a License Key Group [Optional]`_ + * `Create an Entitlement Pool`_ + * `Create a Feature Group`_ + * `Create a License Agreement`_ + * `Create a Vendor Software Product`_ + * `Update VFCs in a VSP [optional]`_ + * `Update a VSP [optional]`_ + +After updating the artifacts in a VSP, also update: + * the VF created from the VSP + * any services that include the VF + +|image1| + +Create a License Model +---------------------- + +VSPs optionally require a license and entitlements to enable the service provider to track the usage. + +Note: For interim saving while creating the license model and its components, click |image2| + +**Prerequisites:** To obtain license information, contact the service provider's Supply Chain Management (SCM) group. + +|image3| + +#. From the SDC HOME page, click *ONBOARD*. +#. Hover over Add and select New License Model. +#. Complete all fields. +#. Click *Save*. +#. In the ONBOARD header, hover over the arrow after License Agreements to reveal a menu. + Select the following options in order: + + #. Create 0 or more license key groups (see `Create a License Key Group [Optional]`_). + #. Create 1 or more entitlement pools (see `Create an Entitlement Pool`_). + #. Create 1 or more feature groups (see `Create a Feature Group`_). + #. Create 1 or more license agreements (see `Create a License Agreement`_). + + Note: Perform all steps above before submitting the license model to the SDC catalog. + +#. In the header, click the license model created in steps 1 to 4. +#. Click *Check In* to save changes. +#. Click *Submit* to add the license model to the catalog. A success message displays. +#. After creating a license, complete `Create a Vendor Software Product`_ to add the VSP required for the associated VF. + +Create a License Key Group [Optional] +------------------------------------- + +If required by the resource model, create one or more license key groups; otherwise the license key group is optional. + +**Prerequisites:** `Create a License Model`_ + +|image4| + +1. From the drop-down menu, select License Key Groups. +2. Click *Add License Key Group*. + The Create New License Key Group box displays. +3. Complete all fields. + Note: Enter the manufacturer reference number in the Name field. +4. Click *Save*. + +Create an Entitlement Pool +-------------------------- + +**Prerequisites:** If required by the resource model, create one or more license key groups (see `Create a License Key Group [Optional]`_). + +|image5| + +1. From the drop-down menu, select Entitlement Pools. +2. Click *Add Entitlement Pool*. + The Create New Entitlement Pool box displays. +3. Complete required fields (mandatory fields are marked by a red asterisk). +4. Click *Save*. + +Create a Feature Group +---------------------- + +**Prerequisites:** Create one or more: + +* license key groups if required by the resource model (see `Create a License Key Group [optional]`_) +* entitlement pools (see `Create an Entitlement Pool`_) + +|image6| + +1. From the drop-down menu, select Feature Groups. +2. Click *Add Feature Group*. + The Create New Feature Group box displays. +3. On the General tab, complete all fields. +4. Click *Entitlement Pools*. +5. Click *Available Entitlement Pools*. +6. Select one or more entitlement pools and click the right arrow. +7. Click *License Key Groups*. +8. Click *Available License Key Groups*. +9. Select one or more license key groups and click the right arrow. +10. Click *Save*. + +Create a License Agreement +-------------------------- + +**Prerequisites:** Create one or more feature groups (see `Create a Feature Group`_). + +|image7| + +1. From the drop-down menu, select License Agreements. +2. Click *Add License Agreement*. + The Create New License Agreement box displays. +3. On the General tab, complete required fields (mandatory fields are marked by a red asterisk). +4. Click *Feature Groups*. +5. If not selected, click *Available Feature Groups*. +6. Select one or more groups and click the right arrow. +7. Click *Save*. +8. Return to step 5 of `Create a License Model`_ to complete the license model. + +Create a Vendor Software Product +-------------------------------- + +Create one or more Vendor Software Products (VSPs) as the building blocks for VFs. + +.. note:: + For interim saving while creating a VSP, click |image2| + +**Prerequisites:** + +* `Create a License Model`_ +* Generate manifest and package artifacts. + +#. From the SDC HOME page, click *ONBOARD*. +#. Hover over Add and select New Vendor Software Product. +#. The New Software Product box is displayed. + Complete all fields. +#. Click *Save*. + The Overview section is displayed. + + .. note:: + A warning is displayed under License Agreement if the VSP does not have an associated license. + +#. Click *Software Product Details* (left pane). + + |image8| + +#. In order, select a licensing version, a license agreement, and one or more feature groups. +#. [Optional] Complete other fields, such as Availability (high-availability zones) and Storage + Data Replication (requirement for storage replication), as required. +#. In Software Product Attachments (right pane), click *Select file*. +#. Locate a Heat .zip package and click *Open*. + SDC validates the files in the package. After successful validation, SDC displays the files + and a success message. If validation fails, SDC displays the errors in the files. + + Example Heat errors: + + |image9| + +#. Click *Check In* to save the changes. +#. Click *Submit* to add the VSP to the catalog. +#. A success message is displayed. If the VSP attachments contain errors, an error message is displayed instead. Fix the issue(s) and re-submit. +#. To configure VFCs associated with the VSP, see `Update VFCs in a VSP [optional]`_, below. + + +Update VFCs in a VSP [optional] +------------------------------- + +If required, configure Virtual Function Components (VFCs) associated with a VSP, such as the Hypervisor, VM recovery details, and cloning. VFCs are listed on the Components tab. + +.. note:: + All fields are optional. Answers to questionnaires are stored as metadata only on the SDC platform. + +**Prerequisites:** Add one or more VSPs (see `Create a Vendor Software Product`_). + +#. From the SDC HOME page, click *ONBOARD* and search for a VSP. +#. In the Overview section, click *Check Out*. +#. In Components (bottom pane), click a VFC (VSP component). + The component links display in the left pane. +#. Click *General* to view and edit general parameters such as hypervisor, image format, VM recovery details, and DNS configuration. +#. Click *Compute* to view and edit VM parameters such as the number of VMs required for a VFC instance and persistent storage/volume size. +#. Click *High Availability & Load Balancing* to answer questions related to VM availability and load balancing. +#. Click *Networks* to view or edit parameters related to network capacity and interfaces. + + .. note:: + Click an interface to view or edit it. A dialog box displays similar to the figure below. + + |image10| + +#. Click *Storage* to configure storage information, such as backup type, storage size, and logging. +#. Click *Process Details*, click *Add Component Process Details*, and complete the Create New Process Details dialog box. Use Process Details to identify the processes and configuration associated with VFCs. +#. Click *Monitoring* to upload MIB or JSON files for SNMP traps and polling. +#. Click *Overview* and click *Check In* to save changes. +#. If updating a VSP, click *Submit*. If this procedure is performed during the workflow to create a VSP, there is no need to click *Submit* now. + +Update a VSP [optional] +----------------------- + +Upload a new Heat package to a VSP. Afterward, update the VF and service. + +**Prerequisites:** Add one or more VSPs (see `Create a Vendor Software Product`_). + +#. From the SDC HOME page, click *ONBOARD* and search for a VSP. +#. In the Overview section, click *Check Out*. +#. In Software Product Attachments (right pane), click *Select file*. +#. Locate a Heat .zip package and click *Open*. + SDC warns that uploading a new package erases existing data. +#. Click *Continue* to upload the new Heat package. + SDC validates the files in the package. After successful validation, SDC displays the files and a success message. If validation fails, SDC displays the errors in the files. + + .. note:: + If the Heat template contains errors, contact the Certification Group for guidance on how to proceed. + +#. Click *Check In* to save changes. +#. Click *Submit* to add the VSP to the catalog. + A success message is displayed. If the VSP attachments contain errors, an error message is displayed instead. Fix the issue(s) and re-submit. +#. After updating the VSP: + #. Upload the VSP to the VF (see steps 3 to 5 in (TBD)Update a VF [optional]). + #. Update the VF version in services that include the VF (see step 4 in (TBD) Update a service [optional]). + + +.. |image0| image:: media/sdro-resource-onboarding-workflow.png + +.. |image1| image:: media/sdro-vsp-service-workflow.png + +.. |image2| image:: media/sdro-sdc_vsp_save.png + +.. |image3| image:: media/sdro-license-creation.png + +.. |image4| image:: media/sdro-license-keygroup.png + +.. |image5| image:: media/sdro-entitlement-pool.png + +.. |image6| image:: media/sdro-feature-group.png + +.. |image7| image:: media/sdro-license-agreement.png + +.. |image8| image:: media/sdro-software-product.png + +.. |image9| image:: media/sdro-design_onboardvsp_heaterrors.png + +.. |image10| image:: media/sdro-edit-nic.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_asdccanvas_connect_elements.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_asdccanvas_connect_elements.png Binary files differnew file mode 100644 index 000000000..27c8986e5 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_asdccanvas_connect_elements.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png Binary files differnew file mode 100644 index 000000000..94a6743ed --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-design_onboardvsp_heaterrors.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png Binary files differnew file mode 100644 index 000000000..2db64c40b --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-edit-nic.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png Binary files differnew file mode 100644 index 000000000..20fee24c0 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-entitlement-pool.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png Binary files differnew file mode 100644 index 000000000..9f4f1b408 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-feature-group.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png Binary files differnew file mode 100644 index 000000000..ef99406d9 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-agreement.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-creation.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-creation.png Binary files differnew file mode 100644 index 000000000..a358d03a4 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-creation.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png Binary files differnew file mode 100644 index 000000000..c8f293401 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-license-keygroup.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-resource-onboarding-workflow.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-resource-onboarding-workflow.png Binary files differnew file mode 100644 index 000000000..dcc3104e4 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-resource-onboarding-workflow.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-sdc_vsp_save.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-sdc_vsp_save.png Binary files differnew file mode 100644 index 000000000..81f1df634 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-sdc_vsp_save.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-software-product.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-software-product.png Binary files differnew file mode 100644 index 000000000..457baa8cf --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-software-product.png diff --git a/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-service-workflow.png b/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-service-workflow.png Binary files differnew file mode 100644 index 000000000..5a5ad9496 --- /dev/null +++ b/docs/guides/onap-user/design/resource-onboarding/media/sdro-vsp-service-workflow.png diff --git a/docs/guides/onap-user/design/service-design/index.rst b/docs/guides/onap-user/design/service-design/index.rst new file mode 100644 index 000000000..dcc6b9c62 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/index.rst @@ -0,0 +1,298 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2019 ONAP Contributors. All rights reserved. + +Service Design +============== + +**Goal:** Add models and other artifacts required to create, configure, +instantiate, and manage services. Validate and certify the services. + +**Tool:** SDC + +**SDC user roles:** Designer, Tester + +|image1| + +**Figure: Workflow for Service design** + +**Steps** + + #. `Create a Service`_ + #. `Create a Workflow [optional]`_ + #. `Create a Network Callflow [optional]`_ + #. `Select VID Inputs [optional]`_ + #. `Update a Service [optional]`_ + #. `Submit a Service for Testing`_ + #. `Test a Service`_ + #. `Assign an IP Address Plan`_ + +Create a Service +---------------- + +**Prerequisites:** Create VFs required for this service (see :ref:`vfcreation-and-testing`). + +#. From the SDC HOME page, hover over Add and select Add Service. +#. In the General section, complete all fields. + + Note: Use the letters "Svc" in the name to indicate that the + component is a service. + +#. Click Create. + + A message displays when VF creation is complete. + +#. Click Composition. + + For a description of the Composition section (see \ `Composition + (Service design) <https://wiki.onap.org/x/lIwP>`__ ). + +#. Drag one or more elements from the Elements palette to the canvas. +#. To connect elements: + + #. Hover over an element and then hover over \ |image2|. + + Other elements that can connect to this element are highlighted. + + #. Drag to a highlighted element on the canvas. + #. Select options for Requirements and Capabilities. + #. Click Connect. + +#. To add artifacts at the service level: + + #. Click an empty area in the canvas and click Deployment Artifacts + (right pane). + #. Click \ |image3|. + #. Select the type. + #. Click Browse, locate a file to upload, and click Open. + #. Complete all other fields. + #. Click Done. + + Use this function to add YANG artifacts for distribution to SDNC. + +#. Click Check In to save changes. + + A box displays for confirming the changes. + +#. Enter a comment and click OK. + + A message displays when the VF is checked in. + +#. [Optional] At any time before submitting the service for testing, + click these options to update service information: + + - Icon — change the icon associated with the service + - TOSCA Artifacts — view and edit artifacts, such as the .csar file + and TOSCA template + - Composition — view or edit the graphical representation of the + service-level TOSCA model + - Activity Log — view activity related to the service + - Workflow — model service lifecycle workflows for execution in SO + (see `Create a Workflow [optional]`_) + - Network Call Flow — model interactions among VFs (see `Create a + Network Callflow [optional]`_) + - Deployment — view HEAT modules in VSPs + - Inputs — select parameters as input fields during VID + instantiation (see `Select VID Inputs [optional]`_). + +#. After creating a service and configuring optional fields, submit it + for testing (see `Submit a Service for Testing`_). + + +Create a Workflow [optional] +---------------------------- + +Create a workflow to model the SO recipes of the service life cycle such +as instantiation, upgrade, termination, or suspension of a service or +VNF. In the workflow each of the Activity, represent API calls to +various ONAP components (such as OOF, SDN-C, App-C, etc) that perform a +business function needed. + +Note: The information collected in this section is represented in BPMN +format and included in distributed service model. + +**Prerequisites:** All the required ActivitySpec as supported by SO + are registered in SDC. + +#. From the SDC HOME page, click WORKFLOW. +#. Click Add Workflow. +#. The Create New Workflow box displays. +#. Complete all fields. +#. Click Create. +#. Specify Inputs & Outputs of Workflow +#. Define the Composition of Workflow. + + #. All the Tasks in the composition are expected to be ServiceTask + for using Activities defined in SO. + #. Select the Implementation in the Task "general" tab to Activity. + #. Select the required ActivitySpec. + +#. Mark the workflow as executable by selecting the Executable flag in + the workflow "general" tab. +#. Click Save. +#. Certify the Workflow. + +Create a Network Callflow [optional] +------------------------------------ + +Create a network callflow to model the interactions among VFs within a +service, such how VFs interact to deliver a service while the service is +being consumed. In the model, lifelines represent VFs. + +Note: The information collected in this section is not distributed with +the service model. + +**Prerequisites:** `Create a service`_ + +#. From the SDC HOME page, click CATALOG and search for a service. +#. Click the service and click Check Out. +#. Click Network Call Flow. +#. Click Add Workflow. + The Create New Workflow box displays. +#. Complete all fields. +#. Click Save. +#. In the new workflow pane, click the Lifelines icon. + + The LIFELINES/STEPS view displays. + +#. To add a lifeline (component), do the following: + + #. Click LIFELINES to expand the pane. + #. Click Add Lifeline. + #. In the [Unnamed Lifeline field], enter a name for the lifeline. + #. To add other lifelines to the workflow, repeat the actions above. + +#. After creating all required lifelines, do the following to add a step + (showing an action between two lifelines): + + #. Under STEPS (left pane), click Add Message. + An unnamed step is added under STEPS. + #. In the [Unnamed Message] field, enter a name or message for the + step. + #. From the component and arrow dropdown lists, select the two + components that communicate in this step, and the arrow to show in + which direction the communication flows. + #. To add another step, repeat the actions above. + +#. [Optional] Change the order of steps by clicking a step and dragging + it to the preferred position. +#. Click Save. +#. Click Check In to save changes. + +Select VID Inputs [optional] +---------------------------- + +Select parameters as input fields during +`VID <https://wiki.onap.org/display/DW/Glossary#Glossary-VID>`__ +instantiation. + +Note: For questions about how to use this section, contact the Service +Design and Creation team (see \ `Mailing +Lists <https://wiki.onap.org/display/DW/Mailing+Lists>`__). + +**Prerequisites:** `Create a service`_ + +#. From the SDC HOME page, click CATALOG and search for a service. +#. Click the service and click Check Out. +#. Click Inputs. +#. From the Resource instance inputs pane, expand the name of a + resource. +#. Select inputs by clicking the check box in each row as required. + Note: Do not select inputs that are already in the ENV file (this + overwrites values specified in the ENV). +#. Click \ |image4| to move selected inputs to the Service inputs pane. +#. Click Check In to save changes. + +Update a Service [optional] +--------------------------- + +Update service information and artifacts. + +Update the version of a VF referenced in the service whenever the VF is +updated (see step 4). + +**Prerequisites:** + +- Create a service. +- If a VF included in the service was updated: see "Update a VF + [optional]" and "Test a VF". + +#. From the SDC HOME page, click CATALOG and search for a service. +#. Click the service and click Check Out. +#. Click Composition. +#. To update the version of a VF referenced in the service: + + #. Click Composition. + #. Click the VF in the canvas. + #. On the General Info tab (right pane), select the VF version. + +#. To update artifacts at the service level: + + #. Click an empty area in the canvas and click Deployment Artifacts + (right pane). + #. View, add, delete, or download artifacts as required. + +#. [Optional] Add, edit, or remove VFs that comprise the service + reference architecture (see steps 4 to 6 in \ `Create a Service`_). +#. [Optional] Click Operations to edit Service Operations. + + #. Create/Edit Operations + #. Assign Workflow + #. Click Save + +#. [Optional] Click Management Callflow to edit, upload, or delete + associated deployment artifacts (see "Create a Management Workflow [optional]"). +#. [Optional] Click Network Callflow to edit the interactions among VFs + that comprise the service (see `Create a Network Callflow [optional]`_). +#. [Optional] Click Inputs to select parameters as input fields during + VID instantiation (see `Select VID Inputs [optional]`_). +#. Click Check In to save changes. +#. After updating a service and configuring optional fields, submit it + for testing (see `Submit a Service for Testing`_). + +Submit a Service for Testing +---------------------------- + +Note: A service cannot be submitted for testing if the reference +architecture contains uncertified resources. + +**Prerequisites:** `Create a Service`_ + +#. When a service is ready for testing, click CATALOG and search for the + service. +#. Click the service and click Submit for Testing. + A box displays for sending a message to the testers. +#. Enter a message for the testers asking that they begin service + certification and click OK. + + The default mail client launches with a draft email containing the + message from step 2. + +#. Add the email addresses of the people on the Certification Group with + the Tester role and send the email. + +Test a Service +-------------- + +Test the design and associated artifacts of a service. + +**Prerequisites:** `Submit a Service for Testing`_. + +#. Sign in to SDC as a Tester. +#. From the HOME page, select Ready For Testing under Active Projects. +#. In the right pane, click the service to test. +#. Click Start Testing. +#. Test the service. +#. When testing is complete, click Accept. + +Assign an IP Address Plan +------------------------- + +Assigning an IP address plan is specific to each OpenECOMP installation. +The object: to assign a Service's key to a "plan" for allocating IP +addresses. + +.. |image1| image:: media/design_service_workflow.png +.. |image2| image:: media/design_asdccanvas_connect_elements.png +.. |image3| image:: media/design_service_adddeploymentartifact.png +.. |image4| image:: media/design_service_inputs_move.png diff --git a/docs/guides/onap-user/design/service-design/media/design_asdccanvas_connect_elements.png b/docs/guides/onap-user/design/service-design/media/design_asdccanvas_connect_elements.png Binary files differnew file mode 100644 index 000000000..27c8986e5 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/design_asdccanvas_connect_elements.png diff --git a/docs/guides/onap-user/design/service-design/media/design_service_adddeploymentartifact.png b/docs/guides/onap-user/design/service-design/media/design_service_adddeploymentartifact.png Binary files differnew file mode 100644 index 000000000..364a5ce01 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/design_service_adddeploymentartifact.png diff --git a/docs/guides/onap-user/design/service-design/media/design_service_inputs_move.png b/docs/guides/onap-user/design/service-design/media/design_service_inputs_move.png Binary files differnew file mode 100644 index 000000000..c4dcff760 --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/design_service_inputs_move.png diff --git a/docs/guides/onap-user/design/service-design/media/design_service_workflow.png b/docs/guides/onap-user/design/service-design/media/design_service_workflow.png Binary files differnew file mode 100644 index 000000000..fbe4fa20d --- /dev/null +++ b/docs/guides/onap-user/design/service-design/media/design_service_workflow.png diff --git a/docs/guides/onap-user/design/service-distribution/index.rst b/docs/guides/onap-user/design/service-distribution/index.rst new file mode 100644 index 000000000..4ed231047 --- /dev/null +++ b/docs/guides/onap-user/design/service-distribution/index.rst @@ -0,0 +1,135 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2019 ONAP Contributors. All rights reserved. + +Governance Approval and Service Distribution +============================================ + +Each ONAP platform operator will have a specific set of policies +and procedures for approving Services and deploying them in the +operator's ONAP environment. This outline describes the general +flow of such procedures. + +**Goal:** Add all information required to create, instantiate, and +manage a service. + +**Tools:** SDC + +**SDC user roles:** Governor, Ops + +Steps +----- + +- `Review a Service for Governance Approval`_ +- `Request Service Distribution`_ +- `Distribute a Service`_ +- `Verify that the DCAE Blueprint is Deployed`_ + +|image1| + +**Figure 1. Workflow** + +Review a Service for Governance Approval +---------------------------------------- + +A member of the Governance Board performs a governance review of a +certified service and its associated VFs, and then approves (or rejects) +the artifacts for distribution. + +**Prerequisites:** Service is tested. + +**Steps** + +#. Sign in to SDC as a Governor. +#. From the HOME page, click CATALOG and select a service that is ready + for governance review. +#. Review the service and its associated resources. +#. To view deployment artifacts: + + #. Click *Composition* tab (left pane) and then click the Deployment + Artifact icon (right pane) to see the list of artifacts. + #. Click the download icon adjacent to an artifact to download and + view it. + +#. When the review is complete, click: + + - *Accept* if the service passes the governance review. The service is + marked Approved for Distribution. + - *Reject* if the service fails the governance review. The service is + marked Rejected for Distribution. + +After a service receives governance approval, it moves into the Waiting +to be Distributed section of the Operations Workspace (Ops role) + +Request Service Distribution +---------------------------- + +Request service distribution to populate all appropriate ONAP +components with the resources and artifacts ssociated with the service and its +VFs. + +**Prerequisites:** + +A service has received governance approval and is +available in the Waiting to be Distributed section of the SDC Operations +Workspace (under the Ops Role). For more information, see +`Review a Service for Governance Approval`_. + +The steps shown here are generic; each service provider has a different, +specific set of instructions. Contact your site IT support for the +particulars. + +**Steps** + +#. Open at ticket request at your site +#. Make a "DISTRIBUTION REQUEST" +#. Provide the following information in your request: + + - Environment + - Name of service to be distributed + - Version number + - [Optional] Additional information or instructions (provide special + instructions for the request) + - Your user ID + - [Optional] Alternate Contact user ID (provide an alternate contact + if the primary contact is unavailable) + +Distribute a Service +-------------------- + +**Prerequisites:** The service is approved. + +**Steps** + + +#. Sign in to SDC as Ops. +#. In the Active Projects pane (left pane) of the HOME page, select the + W*aiting For Distribution* check box. +#. Select a service that is ready for distribution. +#. Review the version history to verify that the correct version is + selected. +#. In the header, click *Distribute*. + + The service moves from the Ready For Distribution folder to the + Distributed Services folder. + +#. From the Workspace pane, click *Distributed Services*. + All distributed services display. +#. Select the service distributed in step 5 and click *Monitor*. + The Distribution Report displays. +#. In the Distribution Report, navigate to the Component ID for the + service and click the adjacent down arrow. + The report shows all components associated with the service and their + distribution statuses, such as DOWNLOAD_OK. +#. Review the status of each component. + +Verify that the DCAE Blueprint is Deployed +------------------------------------------ + +The DCAE controller requires a blueprint (or guideline) to be available +at the site on which the first VNF is deployed. This blueprint is a +management workflow and configuration description for a given VNF, and +it must be available after completing the service distribution process +and before beginning the instantiation process. + +.. |image1| image:: media/design_governance_workflow.png diff --git a/docs/guides/onap-user/design/service-distribution/media/design_governance_workflow.png b/docs/guides/onap-user/design/service-distribution/media/design_governance_workflow.png Binary files differnew file mode 100644 index 000000000..44d6b702f --- /dev/null +++ b/docs/guides/onap-user/design/service-distribution/media/design_governance_workflow.png diff --git a/docs/guides/onap-user/design/vfcreation/index.rst b/docs/guides/onap-user/design/vfcreation/index.rst new file mode 100644 index 000000000..39130665a --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/index.rst @@ -0,0 +1,179 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 +.. International License. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2019 ONAP Doc Team. All rights reserved. + +.. _vfcreation-and-testing: + +VF Creation and Testing +======================= +**Goal**: Using VSPs, create one or more VFs as the building blocks for a +service. Validate and certify the VFs. + +**ONAP Component**: SDC + +**SDC user roles**: Designer, Tester + +|image1| + +Steps +----- + +- `Create a VF`_ +- `Update a VF [optional]`_ +- `Submit a VF for testing`_ +- `Test a VF`_ + +Create a VF +----------- + +**Prerequisites:** + +- Create a license for each VF (see Create a license model) (see also the + tutorial Creating a Licensing Model) +- Create a Vendor Software Product. + +**Steps** + +#. From the SDC HOME page, click the *Vendor Software Component* icon in the + header (upper right). + + |image2| + +#. From the Import VF box, expand a VSP name and click the *Import VSP* icon. + + |image3| + +#. In the General section, complete all fields. + + .. note:: Use the letters "VF" in the name to indicate that the component is a VF. + +#. Click *Create*. + + - A message displays while VF creation is in progress. (This can take up to + 10 minutes.) + - A message displays when VF creation is complete. + +#. Click *Check In* to save changes. + + - A box displays for confirming the changes. + +#. Enter a comment and click *OK*. + + - A message displays when the VF is checked in. + +#. [Optional] At any time before submitting the VF for testing, click these + options to update VF information: + + .. note:: These tasks can be done only before submitting the VF for testing. + + - Icon ??? change the icon associated with the VF (vendor-supplied icons are + preferred) + - Deployment Artifacts ??? download, view, modify, or change VF deployment + artifacts (for example, the contents of the Heat .zip file, which contains + the Heat volume template, the VF license, etc.) + - Information Artifacts ??? view or upload artifacts, such as test scripts, test + results, or the AIC questionnaire + - TOSCA Artifacts ??? view or upload the TOSCA model or the TOSCA template + - Properties ??? define or update VF properties (not used in Release 1) + - Composition ??? view or edit the graphical representation of the resource-level + TOSCA model (generated from the Heat template) + - Activity Log ??? view activity related to assets associated with the VF + (displays the action, date, user, status, and any comments related to each + action) + - Deployment ??? view VF modules defined in the Heat template + - Inputs ??? view inputs defined for the resource-level TOSCA model + +#. After creating a VF, submit it for testing (see `Submit a VF for testing`_). + +Update a VF [optional] +---------------------- + +- Update the VSP and other artifacts in a VF. +- Upload a new version the VSP to the VF whenever the VSP is updated (see steps + 3 to 5). Other reasons for updating a VF include: + + - artifact changes at the VF level that need be uploaded, for example, + changes to ENV values (see step 6) + +**Prerequisites:** + +- `Create a VF`_. +- If the VSP was updated: Update a VSP [optional] + +**Steps** + +#. From the SDC HOME page, click *CATALOG* and search for a VF. + +#. In the General section, click *Check Out*. + The Select VSP field is displays. + +#. In the Select VSP field, click *Browse*. + The Import VF box displays and shows the VSP that was used to create the VF. + +#. Expand the VSP field and click. + + |image4| + +#. Click |image5| + A progress bar displays. |image6| + +#. Click *Deployment Artifact* to edit, upload, or delete associated [Optional] + deployment artifacts. + +#. Click *Information Artifact* and edit, upload, or delete associated + [Optional] information artifacts. + +#. Click *Check In* to save changes. + +#. After updating the VF: + + - Submit the VF for testing (see Submit a VF for testing). + - Update the VF version in any service that contains the VF + (see step 4 in Update a service [optional]). + +Submit a VF for testing +----------------------- + +**Prerequisites:** `Create a VF`_ + +**Steps** + +#. When a VF is ready for testing, click *CATALOG* and service for the VF. +#. Click the VF and click *Submit for Testing*. + + |image7| + + |image8| + +#. Enter a message for the testers asking that they begin service certification + and click *OK*. + + The default mail client launches with a draft email containing the message. + +#. Add the email addresses of the people on the Certification Group for this + site with the *Tester* role and send the email. + +Test a VF +--------- + +Test the design and artifacts of a VF. + +**Prerequisites:** `Submit a VF for testing`_. + +**Steps** + +#. Sign in to SDC as a *Tester*. +#. From the HOME page, select *Ready For Testing* under Active Projects. +#. In the right pane, click the VF. +#. Click *Start Testing*. +#. Test the VF. +#. When testing is complete, click *Accept*. + +.. |image1| image:: media/design_vf_workflow.png +.. |image2| image:: media/image2017-1-27_11-13-30.png +.. |image3| image:: media/image2017-1-27_11-14-3.png +.. |image4| image:: media/image2017-1-27_11-17-18.png +.. |image5| image:: media/sdc_artifact_update.png +.. |image6| image:: media/design_vf_updatevspmessage.png +.. |image7| image:: media/image2017-1-27_11-20-13.png +.. |image8| image:: media/image2017-1-27_11-21-4.png diff --git a/docs/guides/onap-user/design/vfcreation/media/design_vf_updatevspmessage.png b/docs/guides/onap-user/design/vfcreation/media/design_vf_updatevspmessage.png Binary files differnew file mode 100644 index 000000000..bf401daac --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/design_vf_updatevspmessage.png diff --git a/docs/guides/onap-user/design/vfcreation/media/design_vf_workflow.png b/docs/guides/onap-user/design/vfcreation/media/design_vf_workflow.png Binary files differnew file mode 100644 index 000000000..d3e831229 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/design_vf_workflow.png diff --git a/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-13-30.png b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-13-30.png Binary files differnew file mode 100644 index 000000000..7bf32d4fc --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-13-30.png diff --git a/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-14-3.png b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-14-3.png Binary files differnew file mode 100644 index 000000000..5a8d190a8 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-14-3.png diff --git a/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-17-18.png b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-17-18.png Binary files differnew file mode 100644 index 000000000..d12ca8fec --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-17-18.png diff --git a/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-20-13.png b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-20-13.png Binary files differnew file mode 100644 index 000000000..82392a742 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-20-13.png diff --git a/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-21-4.png b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-21-4.png Binary files differnew file mode 100644 index 000000000..594664344 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/image2017-1-27_11-21-4.png diff --git a/docs/guides/onap-user/design/vfcreation/media/sdc_artifact_update.png b/docs/guides/onap-user/design/vfcreation/media/sdc_artifact_update.png Binary files differnew file mode 100644 index 000000000..266d965f8 --- /dev/null +++ b/docs/guides/onap-user/design/vfcreation/media/sdc_artifact_update.png |
