diff options
Diffstat (limited to 'docs/guides/onap-user/design/vfcreation/index.rst')
| -rw-r--r-- | docs/guides/onap-user/design/vfcreation/index.rst | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/docs/guides/onap-user/design/vfcreation/index.rst b/docs/guides/onap-user/design/vfcreation/index.rst deleted file mode 100644 index 59df89f3a..000000000 --- a/docs/guides/onap-user/design/vfcreation/index.rst +++ /dev/null @@ -1,233 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 -.. International License. http://creativecommons.org/licenses/by/4.0 -.. Copyright 2019 ONAP Doc Team. All rights reserved. - -.. _doc_guide_user_des_vf-cre: - -VF/PNF Creation and Testing -=========================== -**Goal**: Using VSPs, create one or more VFs/PNFs as the building blocks for a -service. Validate and certify the VFs/PNFs. - -**ONAP Component**: SDC - -**SDC user roles**: Designer - -|image1| - -Steps ------ - -- `Create a VF/PNF by VSP import`_ -- `Create a VF/PNF manually`_ -- `Update a VF/PNF [optional]`_ -- `Certify VF/PNF`_ - -.. _doc_guide_user_des_vf-cre_cre-imp: - -Create a VF/PNF by VSP import ------------------------------ - -**Prerequisites:** (see :ref:`doc_guide_user_des_res-onb` ) - -- Create a license for each VF/PNF -- Create a Vendor Software Product. - -**Steps** - -#. From the SDC HOME page, hover over *Import*, then click on *IMPORT VSP* - - |image2| - -#. From the *Import VSP* box, expand a VSP name and click the *Import VSP* icon. - - |image3| - -#. In the General section, complete all fields. - - |image10| - -#. Click *Create*. - - - A message displays while creation is in progress. (This can take up to - 10 minutes.) - - A message displays when creation is complete. - - -#. [Optional] At any time before checking in the VF/PNF, click - these options to update VF/PNF information: - - .. note:: These tasks can be done only before certifying the VF/PNF. - - - **General->Icon** change the icon associated with the VF/PNF - (vendor-supplied icons are preferred) - - **Deployment Artifacts** download, view, modify, or change deployment - artifacts (for example, the contents of the Heat .zip file, which contains - the Heat volume template, the license, CDS Blueprints,...) - - **Information Artifacts** view or upload artifacts, such as test - scripts, test results, or the AIC questionnaire - - **TOSCA Artifacts** view or upload the TOSCA model or the TOSCA template - - **Composition** view or edit the graphical representation of the resource-level - TOSCA model (generated from the Heat template) - - **Activity Log** view activity related to assets associated with the VF/PNF - (displays the action, date, user, status, and any comments related to each - action) - - **Deployment** view VF modules defined in the Heat template - - **Properties Assignment** define or update properties and input parameters - and policies - - **Req.& Capabilities** view and add requirements and capabilities - -#. Click *Check In* to save changes. - - - A box to enter comments for confirming the changes open. - -#. Enter a comment and click *OK*. - - - A message displays when the VF/PNF is checked in and you are redirected - to the Home screen. -#. After creating and checking a VF/PNF, certify it (see `Certify VF/PNF`_). - -.. _doc_guide_user_des_vf-cre_cre-man: - -Create a VF/PNF manually ------------------------- - -**Steps** - -#. From the SDC HOME page, hover over *Add*, then click on *ADD VF* or *ADD PNF*. - - |image2| - -#. In the General section, complete all fields. - -#. Click *Create*. - - - A message displays while creation is in progress. (This can take up to - 10 minutes.) - - A message displays when creation is complete. - -#. Before check-in the VF/PNF, click these - options to update VF/PNF information: - - .. note:: These tasks can be done only before certifying the VF/PNF. - - - **General->Icon** change the icon associated with the VF/PNF - (vendor-supplied icons are preferred) - - **Deployment Artifacts** download, view, modify, or change deployment - artifacts (for example, the contents of the Heat .zip file, which contains - the Heat volume template, the license, CDS Blueprints,...) - - **Information Artifacts** view or upload artifacts, such as test - scripts, test results, or the AIC questionnaire - - **TOSCA Artifacts** view or upload the TOSCA model or the TOSCA template - - **Composition** view or edit the graphical representation of the resource-level - TOSCA model (generated from the Heat template) - - **Activity Log** view activity related to assets associated with the VF/PNF - (displays the action, date, user, status, and any comments related to each - action) - - **Deployment** view VF modules defined in the Heat template - - **Properties Assignment** define or update properties and input parameters - and policies - - **Req.& Capabilities** view and add requirements and capabilities - -#. Click *Check In* to save changes. - - - A box to enter comments for confirming the changes open. - -#. Enter a comment and click *OK*. - - - A message displays when the VF/PNF is checked in and you are redirected - to the Home screen. -#. After creating and checking a VF/PNF, certify it (see `Certify VF/PNF`_). - - -.. _doc_guide_user_des_vf-cre_vf-upd: - -Update a VF/PNF [optional] --------------------------- - -- Update the VSP and other artifacts in a VF/PNF. -- Upload a new version the VSP to the VF/PNF whenever the VSP is updated - (see steps 3 to 5). -- Other reasons for updating a VF/PNF include: - - - artifact changes at the VF/PNF level that need be uploaded, for example, - changes to ENV values (see step 6) - -**Prerequisites:** - -- `Create a VF/PNF by VSP import`_ or `Create a VF/PNF manually`_ -- If the VSP was updated: :ref:`doc_guide_user_des_res-onb_upd-vsp` - -**Steps** - -#. From the SDC HOME page, click *CATALOG* and search for the VF/PNF, click on selected VF/PNF to update. - -#. In the General section, click *Check Out*. - The *VSP* field is displays. - -#. In the *VSP* field, click *Browse*. - The *Import VSP* box displays and shows the VSP that was used to create the VF/PNF. - -#. Expand the VSP field and click. - - |image4| - -#. Click *Update VSP* - A progress bar displays. - |image5| - -#. Click *Deployment Artifact* to edit, upload, or delete associated [Optional] - deployment artifacts. - -#. Click *Information Artifact* and edit, upload, or delete associated - [Optional] information artifacts. - -#. Click *Check In* to save changes. - - - A box to enter comments for confirming the changes open. - -#. Enter a comment and click *OK*. - - - A message displays when the VF/PNF is checked in and you are redirected - to the Home screen. -#. After updating the VF/PNF: - - - Certify it (see `Certify VF/PNF`_). - - Update the VF/PNF version in any service that contains the VF/PNF, - please go to :ref:`doc_guide_user_des_ser-upd_serv` - -.. _doc_guide_user_des_vf-cre_sub-tst: - -Certify VF/PNF --------------- - -**Prerequisites:** `Create a VF/PNF by VSP import`_ or -`Create a VF/PNF manually`_ - -**Steps** - -#. When a VF/PNF is ready for certification, - On the SDC HOME page, click *CATALOG* and search for the checked-in VF/PNF. - Bottom half of the VN/PNF will say “In Design Check In”. - -#. Click the VF/PNF and click *Certify*. - - |image7| - - |image8| - -#. Enter a comment and click *OK*. - -#. A Message appears, that the VF/PNF is certified. - - -.. |image1| image:: media/sdc-vf-workflow.png -.. |image2| image:: media/sdc-home.png -.. |image3| image:: media/sdc-Import.png -.. |image4| image:: media/sdc-vsp-update.png -.. |image5| image:: media/sdc_artifact_update.png -.. |image6| image:: media/design_vf_updatevspmessage.png -.. |image7| image:: media/sdc-vf-general-certify.png -.. |image8| image:: media/sdc-vf-certify-confirm.png -.. |image9| image:: media/SDC-Add.png -.. |image10| image:: media/sdc-vf-general.png |