diff options
Diffstat (limited to 'docs/guides/onap-user/design/service-design')
14 files changed, 0 insertions, 350 deletions
diff --git a/docs/guides/onap-user/design/service-design/index.rst b/docs/guides/onap-user/design/service-design/index.rst deleted file mode 100644 index 47fb614f0..000000000 --- a/docs/guides/onap-user/design/service-design/index.rst +++ /dev/null @@ -1,350 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 -.. International License. http://creativecommons.org/licenses/by/4.0 -.. Copyright 2019 ONAP Contributors. All rights reserved. - -.. _doc_guide_user_des_ser-des: - -Service Design -============== - -**Goal:** Add models and other artifacts required to create, configure, -instantiate, and manage services. Validate and certify the services. -Besides the manual creation of a Service Model, an existing model can -be imported via a CSAR file - -**Tool:** SDC - -**SDC user roles:** Designer - -|image1| - -**Figure: Workflow for Service design** - -**Steps** - - #. `Create Service`_ - #. `Create a Management Workflow [optional]`_ - #. `Create a Network Callflow [optional]`_ - #. `Manage Service Properties [optional]`_ - #. `Update Service [optional]`_ - #. `Certify Service`_ - #. `Import Service CSAR [optional]`_ - -.. _doc_guide_user_des_ser-cre_serv: - -Create Service --------------- - -**Prerequisites:** Create VF/PNFs required for this service (see :ref:`doc_guide_user_des_vf-cre`). - -#. From the SDC HOME page, hover over Add and select *ADD SERVICE*. - - |image0| - -#. In the General section, complete all fields. - - |image5| - -#. Click Create. - - A message displays when Service creation is complete. - -#. Click Composition in the left pane. - - |image6| - - For a description of the Composition section (see SDC User Guide ). - -#. Drag one or more elements from the Elements palette to the canvas. -#. To connect elements: - - #. Hover over an element and then hover over \ |image2|. - - Other elements that can connect to this element are highlighted. - - #. Drag to a highlighted element on the canvas. - #. Select options for Requirements and Capabilities. - #. Click on Finish. - -#. To add artifacts at the service level: - - #. Click an empty area in the canvas and click *Deployment Artifacts* - (right pane). - #. Click \ |image3|. - #. Select the type. - #. Click Browse, locate a file to upload, and click Open. - #. Complete all other fields. - #. Click Done. - - Use this function to add YANG artifacts for distribution to SDNC. - -#. [Optional] At any time before checking in the Service, click - these options to update Service information: - - .. note:: These tasks can be done only before certifying the Service. - - - **General->Icon** change the icon associated with the Service - - **TOSCA Artifacts** view and edit artifacts, such as the .csar file - and TOSCA template - - **Composition** view or edit the graphical representation of the - service-level TOSCA model - - **Activity Log** view activity related to the Service - (displays the action, date, user, status, and any comments related to each - action) - - **Management Workflow** model service lifecycle workflows for execution - in SO (see `Create a Management Workflow [optional]`_) - - **Network Call Flow** model interactions among VFs (see - `Create a Network Callflow [optional]`_) - - **Deployment** view HEAT modules in VSPs - - **Properties Assignment** define or update properties, - policies and input parameters used during Service instantiation. - - **Monitoring** ... - -#. Click *Check In* to save changes. - - A box displays for confirming the changes. - -#. Enter a comment and click OK. - - A message displays when the Service is checked in and the - Home page is displayed. - -#. After creating a service and configuring optional fields, certify it - (see `Certify Service`_). - -Note: Create Service can also be invoked via External SDC API. -Refer SDC REST API reference for details of the API. -Currently, only a 'Partner Domain Service' category is supported -which cannot be created manually from SDC portal. - -.. _doc_guide_user_des_ser-cre_wf: - -Create a Management Workflow [optional] ---------------------------------------- - -Create a workflow to model the SO recipes of the service life cycle such -as instantiation, upgrade, termination, or suspension of a service or -VNF. In the workflow each of the Activity, represent API calls to -various ONAP components (such as OOF, SDN-C, App-C, etc) that perform a -business function needed. - -Note: The information collected in this section is represented in BPMN -format and included in distributed service model. - -**Prerequisites:** All the required ActivitySpec as supported by SO - are registered in SDC. - -#. From the SDC HOME page, click CATALOG and search for a service. -#. Click the service and click *Check Out*. -#. Select the panel *Management Workflow*. -#. Click *Add Workflow*. -#. The *Create New Workflow* box displays. -#. Complete all fields. -#. Click Save. - - |image7| - -#. Specify Inputs & Outputs of Workflow -#. Define the Composition of Workflow. - - #. All the Tasks in the composition are expected to be ServiceTask - for using Activities defined in SO. - #. Select the Implementation in the Task "general" tab to Activity. - #. Select the required ActivitySpec. - -#. Mark the workflow as executable by selecting the Executable flag in - the workflow "general" tab. -#. Click Save. -#. Certify the Workflow. - -.. _doc_guide_user_des_ser-cre_nfw: - -Create a Network Callflow [optional] ------------------------------------- - -Create a network callflow to model the interactions among VFs within a -service, such how VFs interact to deliver a service while the service is -being consumed. In the model, lifelines represent VFs. - -Note: The information collected in this section is not distributed with -the service model. - -**Prerequisites:** `Create service`_ - -#. From the SDC HOME page, click CATALOG and search for the service. -#. Click the service and click *Check Out*. -#. Click Network Call Flow. -#. Click Add Workflow. - The Create New Workflow box displays. -#. Complete all fields. -#. Click Save. -#. In the new workflow pane, click the Lifelines icon. - - The LIFELINES/STEPS view displays. - -#. To add a lifeline (component), do the following: - - #. Click LIFELINES to expand the pane. - #. Click Add Lifeline. - #. In the [Unnamed Lifeline field], enter a name for the lifeline. - #. To add other lifelines to the workflow, repeat the actions above. - -#. After creating all required lifelines, do the following to add a step - (showing an action between two lifelines): - - #. Under STEPS (left pane), click Add Message. - An unnamed step is added under STEPS. - #. In the [Unnamed Message] field, enter a name or message for the - step. - #. From the component and arrow dropdown lists, select the two - components that communicate in this step, and the arrow to show in - which direction the communication flows. - #. To add another step, repeat the actions above. - -#. [Optional] Change the order of steps by clicking a step and dragging - it to the preferred position. -#. Click *Save*. You will be redirected to the Network Call Flow page. -#. Go to the General tab and click on *Check In* to save changes. -#. If needed, certify the service again (see `Certify Service`_). - -.. _doc_guide_user_des_ser-para_in: - -Manage Service Properties [optional] ------------------------------------- - -Add new Service parameters and define as input fields -during Service instantiation. - - -**Prerequisites:** `Create service`_ - -#. From the SDC HOME page, click CATALOG and search for a service. -#. Click the service and click *Check Out*. -#. Click *Properties Assignment*. - - |image8| - -#. From the *Composition* pane, select the *SELF* object - representing the service. -#. In the *Properties* the existing Service properites are shown -#. With *+Add Property* you can add a new property -#. To set a property as *Input* parameter, select the parameter - by clicking the check box in each row as required. - Note: Do not select inputs that are already in the ENV file (this - overwrites values specified in the ENV). - - |image9| - -#. Click *Declare Input* to add the selected parameter to the - Service *Input* pane. -#. Click *Check In* to save changes. -#. After adding Service Inputs, certify it (see `Certify Service`_). - -.. _doc_guide_user_des_ser-upd_serv: - -Update Service [optional] -------------------------- - -Update service information and artifacts. - -Update the version of a VF referenced in the service whenever the VF is -updated (see step 4). - -**Prerequisites:** - -- Create a service. -- If a VF included in the service was updated: - see :ref:`doc_guide_user_des_vf-cre_vf-upd` - -#. From the SDC HOME page, click CATALOG and search for the service. -#. Click the service and click *Check Out*. -#. Click Composition. -#. To update the version of a VF referenced in the service: - - #. Click Composition. - #. Click the VF in the canvas. - #. On the *General Info* tab (right pane), select the VF version. - -#. To update artifacts at the service level: - - #. Click an empty area in the canvas and click *Deployment Artifacts* - (right pane). - #. View, add, delete, or download artifacts as required. - -#. [Optional] Add, edit, or remove VFs that comprise the service - reference architecture (see steps 4 to 6 in \ `Create Service`_). -#. [Optional] Click *Operations* to edit Service Operations. - - #. Create/Edit Operations - #. Assign Workflow - #. Click Save - -#. [Optional] Click *Management Workflow* to edit, upload, or delete - associated deployment artifacts - (see `Create a Management Workflow [optional]`_). -#. [Optional] Click *Network Callflow* to edit the interactions among VFs - that comprise the service (see `Create a Network Callflow [optional]`_). -#. [Optional] Click *Properties Assignement* to select parameters as - input fields during Service instantiation. -#. Click *Check In* to save changes. -#. After updating a service and configuring optional fields, certify it - (see `Certify Service`_). - -.. _doc_guide_user_des_ser-cfy_serv: - -Certify Service ---------------- - -Note: A service cannot be submitted for testing if the reference -architecture contains uncertified resources. - -**Prerequisites:** `Create Service`_ - -**Steps** - -#. When a Service is ready for certification, - click *CATALOG* and search for the checked-in Service. -#. Click the Service and click *Certify*. - -#. Enter a comment and click *OK*. - -#. A Message appears, that the Service is certified. - - -Import Service CSAR [optional] ------------------------------- - -Note: This step can be used, when a Service Model already exists - -**Steps** - -#. From the SDC HOME page, hover over IMPORT and select *IMPORT SERVICE CSAR*. - - |image0| - -#. In the File Upload Dialog, select the csar file and press *Open*. - - |image10| - -#. In the General section, complete all fields. - - |image11| - -#. Click Create. - - A message displays when Service creation is complete. - -#. Continue with Service Design steps mentioned above - -.. |image0| image:: media/sdc-home.png -.. |image1| image:: media/sdc-service-workflow.png -.. |image2| image:: media/design_asdccanvas_connect_elements.png -.. |image3| image:: media/design_service_adddeploymentartifact.png -.. |image4| image:: media/design_service_inputs_move.png -.. |image5| image:: media/sdc-service-general.png -.. |image6| image:: media/sdc-service-composition.png -.. |image7| image:: media/sdc-service-workflow.png -.. |image8| image:: media/sdc-service-properties.png -.. |image9| image:: media/sdc-service-properties-input.png -.. |image10| image:: media/sdc-service-import.png -.. |image11| image:: media/sdc-service-general-import.png diff --git a/docs/guides/onap-user/design/service-design/media/design_asdccanvas_connect_elements.png b/docs/guides/onap-user/design/service-design/media/design_asdccanvas_connect_elements.png Binary files differdeleted file mode 100644 index 27c8986e5..000000000 --- a/docs/guides/onap-user/design/service-design/media/design_asdccanvas_connect_elements.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/design_service_adddeploymentartifact.png b/docs/guides/onap-user/design/service-design/media/design_service_adddeploymentartifact.png Binary files differdeleted file mode 100644 index 364a5ce01..000000000 --- a/docs/guides/onap-user/design/service-design/media/design_service_adddeploymentartifact.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/design_service_inputs_move.png b/docs/guides/onap-user/design/service-design/media/design_service_inputs_move.png Binary files differdeleted file mode 100644 index c4dcff760..000000000 --- a/docs/guides/onap-user/design/service-design/media/design_service_inputs_move.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/design_service_workflow.png b/docs/guides/onap-user/design/service-design/media/design_service_workflow.png Binary files differdeleted file mode 100644 index fbe4fa20d..000000000 --- a/docs/guides/onap-user/design/service-design/media/design_service_workflow.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-home.png b/docs/guides/onap-user/design/service-design/media/sdc-home.png Binary files differdeleted file mode 100644 index 201383e98..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-home.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png b/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png Binary files differdeleted file mode 100644 index 4ac0d490c..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-general-import.png b/docs/guides/onap-user/design/service-design/media/sdc-service-general-import.png Binary files differdeleted file mode 100644 index f050ff596..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-general-import.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-general.png b/docs/guides/onap-user/design/service-design/media/sdc-service-general.png Binary files differdeleted file mode 100644 index 4bb65d71e..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-general.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-import.png b/docs/guides/onap-user/design/service-design/media/sdc-service-import.png Binary files differdeleted file mode 100644 index bf0c8c196..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-import.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png b/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png Binary files differdeleted file mode 100644 index 2296fd350..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png b/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png Binary files differdeleted file mode 100644 index 0dc111eac..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png Binary files differdeleted file mode 100644 index 35ba6615b..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png +++ /dev/null diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png Binary files differdeleted file mode 100644 index 7caf98122..000000000 --- a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png +++ /dev/null |
