summaryrefslogtreecommitdiffstats
path: root/docs/guides/onap-developer/settingup/fullonap.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/guides/onap-developer/settingup/fullonap.rst')
-rw-r--r--docs/guides/onap-developer/settingup/fullonap.rst162
1 files changed, 162 insertions, 0 deletions
diff --git a/docs/guides/onap-developer/settingup/fullonap.rst b/docs/guides/onap-developer/settingup/fullonap.rst
new file mode 100644
index 000000000..61921add2
--- /dev/null
+++ b/docs/guides/onap-developer/settingup/fullonap.rst
@@ -0,0 +1,162 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+ http://creativecommons.org/licenses/by/4.0
+ Copyright 2017 ONAP
+
+
+.. contents::
+ :depth: 2
+..
+
+
+========================
+**Setting Up Full ONAP**
+========================
+
+.. _demo-installing-running-onap:
+
+**Context**
+===========
+ONAP may be deployed in different contexts depending on your requirements. The recommended installation for Amsterdam Release is currently based on Open Stack.
+
+Using the Amsterdam Release installer, ONAP components may be deployed in a single tenant or multiple tenants. One tenant for all the components except DCAE, and another tenant dedicated to the DCAE components.
+
+The VNFs managed by ONAP may be deployed in different Open Stack tenants or based on top of VMware based infrastructure (cf MultiCloud project).
+
+Figure 1
+
+The current installation is based on the single tenant deployment (all the ONAP components will be hosted in a unique tenant)
+
+
+**Requirements**
+================
+
+OpenStack
+---------
+ONAP installation is validated on `OpenStack Ocata <https://releases.openstack.org/ocata/>`_ or latter release.
+
+The following Open Stack components must be deployed in the infrastructure:
+ - *Cinder*
+ - *Designate*
+ - *Glance*
+ - *Horizon*
+ - *Keystone*
+
+To deploy Open Stack, you can use various solutions:
+ - `OpenStack installer <https://docs.openstack.org/install-guide/>`_
+ - `OPNFV Cross Community Continuous Integration - XCI installer <http://docs.opnfv.org/en/latest/infrastructure/xci.html>`_
+
+*Designate* component is usually not deployed using standard OpenStack installers.
+Please find a guide to deploy and configure *Designate*
+
+Footprint
+---------
+The ONAP installation requires the following footprint:
+ - xx VM
+ - xxx vCPU
+ - xxx RAM
+ - xxx Storage
+ - xxx floating IP
+ - a public SSH key
+ - a private SSH key
+
+Note that floating IP may be private IP.
+
+Security
+--------
+The default installation assumes that the Default security group is configured to enable full access between the ONAP components.
+Depending on your environment, we may need to open some security groups (eg when using the portal from your desktop)
+
+The following YAML file presents the ports exposed by the various components:
+
+.. code-block:: yaml
+
+ ---
+ aai:
+ - 8889
+
+TODO Generate the YAML file with installation
+
+TODO Provide a command to create the security groups
+
+**Deployment**
+==============
+
+Instantiation
+-------------
+- To deploy ONAP, use the Heat template and follow the described guidelines in integration project.
+
+- The Heat template deployment may take time (up to one hour) depending on your hardware environment.
+
+Test the installation
+---------------------
+Every ONAP component offers a HealthCheck REST API. The *Robot Virtual Machine* can be used to test that every components run smoothly.
+Run the following command to perform the HealthCheck:
+
+.. code-block:: bash
+
+ docker exec -it openecompete_container /var/opt/OpenECOMP_ETE/runTags.sh -i health h -d ./html -V /share/config/integration_robot_properties.py -V /share/config/integration_preload_parameters.py -V /share/config/vm_properties.py
+
+This testsuite will execute 31 tests towards the various ONAP components.
+
+Detect problems
+---------------
+If all the tests are not OK, many causes are possible.
+Here is a simple procedure to detect where the problem occurs:
+
+* Check the OpenStack Virtual Machine logs
+* Connect to the Virtual Machine and check that the various containers are running.
+
+The list of containers are described in the following section. In case some containers are missing, check the docker logs using the following command:
+
+.. code-block:: bash
+
+ sudo docker ps -a
+ sudo docker logs <containerid>
+
+
+**Portal configuration**
+========================
+The current ONAP installation is using the onap.org domain.
+To use the portal on your desktop, you must configure the following information in your *host* file (located in /etc/host for Linux or /windows/system32/drivers/etc/hosts for Windows):
+
+.. code-block:: bash
+
+ 104.239.249.17 policy.api.simpledemo.onap.org
+ 104.130.31.25 portal.api.simpledemo.onap.org
+ 104.239.249.15 sdc.api.simpledemo.onap.org
+ 104.130.170.142 vid.api.simpledemo.onap.org
+ 104.239.249.72 aai.api.simpledemo.onap.org
+ TODO ADD ui.aai
+
+You can use the Horizon dashboard to get the IP adresses associated with the Virtual Machines or use the following command line:
+
+.. code-block:: bash
+
+ openstack server list
+
+Launch the portal on the http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+
+Go to the Portal component user guide.
+
+Other UI documentation:
+ - CLAMP
+ - SDC Portal
+ - UI Case
+
+
+**Components**
+==============
+
+The following YAML file presents the list of containers for every Virtual Machine
+
+.. code-block:: yaml
+
+ aai:
+ - traversal
+ - be
+ - fe
+ appc
+ - fe
+
+
+