diff options
author | Pawel Wieczorek <p.wieczorek2@samsung.com> | 2020-03-25 14:08:24 +0100 |
---|---|---|
committer | Gerrit Code Review <gerrit@onap.org> | 2020-03-25 13:08:24 +0000 |
commit | 80c83b6b10fabfed85733e0b0073d3f8cfee58ce (patch) | |
tree | 0a577c43f799c6daf847efac66d9fe5bc64cea94 /docs | |
parent | 2c3339877887b8f032669d52303755fe473585d5 (diff) |
Update git submodules
* Update docs/submodules/integration.git from branch 'master'
to d688c4c4e37526e276690b5b51d1044b7e220aff
- Reduce cyclomatic complexity
Moving CSV data conversion and "expected failure" filtering away from
main function made testing these features easier. Utility behaviour
remained unchanged.
Issue-ID: SECCOM-261
Change-Id: I4cabfc7b352434c84a613c02f44af3c9630be970
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
- Add "expected failure" support to non-SSL NodePort scanner
This patch makes scanner compatible with its shell predecessor. The same
"expected failure" list format is used i.e.
# Comment line; will be ignored
SERVICE1 NODEPORT1
SERVICE2 NODEPORT2
Single space character is used as a field separator.
Issue-ID: SECCOM-261
Change-Id: Ieedd4e98a83ffe242c695133fdf7342e17efa9a2
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
- Run port scan
Issue-ID: SECCOM-261
Change-Id: I465282a8793191c45d288284a127e80e1fecf513
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
- Add IP addresses filtering
Each node might be described with 3 types of addresses [1]. Some
providers also use node annotations [2] for assigned addresses.
This patch filters out all IP addresses from nodes list. External IPs
take precedence over internal ones. The first address on the extracted
slice will be later used to run the scan on.
This behaviour could be later modified to e.g. loop over all extracted
IP addresses (if scan fails).
[1] https://kubernetes.io/docs/concepts/architecture/nodes/#addresses
[2] https://github.com/rancher/rke/blob/master/k8s/node.go#L18
Issue-ID: SECCOM-261
Change-Id: Ifd094447f778da378dfe1aee765f552b6ebd669f
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
- Add temporary "make" target for automated testing compatibility
Utility "sslendpoints" and related packages make use of idiomatic Go
testing commands, i.e. go test [./...]. Thanks to Go Modules [1] nothing
else is needed to run internal tests for this tool.
Unfortunately it's not the case for all Go-based Integration tools. In
order to use a single automated verification script in CI additional
"make" target is required. It will provide temporary compatibility layer
with utilities setting up test environment on their own with "make test"
target.
This patch should be reverted upon removal of such cases (currently:
after dropping "../k8s/check" tool in favour of Aquasec solution).
[1] https://blog.golang.org/using-go-modules (see "Adding a dependency"
test execution explanation)
Issue-ID: INT-1498
Change-Id: I14c83f7f193c7688590366db988ff02c13c036a4
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
- Add NodePorts filtering with development environment basis
This patch has not made "sslendpoints" fully compatible with
"check_for_nonssl_endpoints.sh" script yet. It sets up basic development
environment for Golang-based checkers, though.
Tool output will be added to the README after reaching full
compatibility with previous (script) version.
Development environment brought by this patch is heavily based on:
https://github.com/SamsungSLAV/boruta
Issue-ID: SECCOM-261
Change-Id: I8f035b63bea13785c40971ede5fdbbc9b6810168
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
- Increase verifiability of security checks
This patch introduces a series of patches that will provide tools which
will succeed current security check scripts. Its two main reasons are:
* increasing tools verifiability by providing internal tests,
* improving "expected failure" support by suppressing carefully selected
set of special cases.
Each tool will use following directory structure (generated with
"tree -a --charset=ascii" command):
.
`-- check_module
|-- Dockerfile
|-- .dockerignore
|-- .gitignore
|-- go.mod
|-- main.go
|-- Makefile
|-- README
|-- README.rst -> README
`-- submodule
|-- submodule.go
`-- submodule_test.go
This will allow using Go Modules mechanism within its limitations [1]
for "non-go-get-able modules" [2][3][4] - also in case of separating
code into several modules used by multiple "check modules", e.g.
.
|-- common
| |-- common.go
| |-- common_test.go
| `-- go.mod
`-- check_module
|-- go.mod
`-- ...
It would require migration from separate Dockerfiles to a single one
(multi-stage), though.
Provided Makefiles are intended to simplify local development
(Docker-less building) and container images preparation. READMEs clarify
utility requirements and usage - file without extension is for VCS
reference, symlink for proper syntax rendering.
[1] https://github.com/golang/go/wiki/Modules#is-it-possible-to-add-a-module-to-a-multi-module-repository
[2] https://github.com/golang/go/wiki/Modules#can-i-work-entirely-outside-of-vcs-on-my-local-filesystem
[3] https://github.com/golang/go/issues/26645#issuecomment-408572701
[4] https://www.dim13.org/go-get-cgit
Issue-ID: SECCOM-261
Change-Id: I48eeeda66bd5570d249e96e101e431e6bab75cb3
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>
Diffstat (limited to 'docs')
m--------- | docs/submodules/integration.git | 0 |
1 files changed, 0 insertions, 0 deletions
diff --git a/docs/submodules/integration.git b/docs/submodules/integration.git -Subproject 3d0d6a9a7fc64e42c36c31ff7f371b562ec691f +Subproject d688c4c4e37526e276690b5b51d1044b7e220af |