Consolidated ccsdk references

ccsdk will provide documentation for multiple
repos in ccsdk/distribution.
Split content in settingup/index into two sections
Eliminated Tutorial section now provided by setting up ONAP

Change-Id: I2412dcaa03b0c6a34b90e69c950b62f56989fdb8
Issue-ID: DOC-130
Signed-off-by: Rich Bennett <rb2745@att.com>

7 files changed, 200 insertions, 212 deletions

diff --git a/docs/guides/onap-developer/architecture/references.rst b/docs/guides/onap-developer/architecture/references.rst
index 2bd569009..b152795c4 100644
--- a/docs/guides/onap-developer/architecture/references.rst
+++ b/docs/guides/onap-developer/architecture/references.rst
@@ -92,22 +92,24 @@ SDKs
    :maxdepth: 1
    :titlesonly:
 
-   ../../../submodules/ccsdk/dashboard.git/docs/architecture.rst
    ../../../submodules/ccsdk/distribution.git/docs/architecture.rst
-   ../../../submodules/ccsdk/parent.git/docs/architecture.rst
+   ../../../submodules/ccsdk/dashboard.git/docs/architecture.rst
    ../../../submodules/ccsdk/platform/blueprints.git/docs/architecture.rst
    ../../../submodules/ccsdk/platform/nbapi.git/docs/architecture.rst
-   ../../../submodules/ccsdk/platform/plugins.git/docs/architecture.rst
-   CCSDK SLI Adaptors <../../../submodules/ccsdk/sli/adaptors.git/docs/architecture.rst>
-   CCSDK SLI Service Logic Intrepreter <../../../submodules/ccsdk/sli/core.git/docs/architecture.rst>
-   CCSDK SLI Northbound Interface <../../../submodules/ccsdk/sli/northbound.git/docs/architecture.rst>
-   CCSDK SLI Plugins <../../../submodules/ccsdk/sli/plugins.git/docs/architecture.rst>
    ../../../submodules/ccsdk/storage/esaas.git/docs/architecture.rst
    ../../../submodules/ccsdk/storage/pgaas.git/docs/architecture.rst
    ../../../submodules/ccsdk/utils.git/docs/architecture.rst
    Portal <../../../submodules/portal.git/docs/tutorials/portal-sdk/architecture.rst>
    ../../../submodules/vnfsdk/model.git/docs/architecture.rst
 
+.. CCSDK documentation consolidated under the above distribution repo
+   ../../../submodules/ccsdk/platform/plugins.git/docs/architecture.rst
+   ../../../submodules/ccsdk/parent.git/docs/architecture.rst
+   CCSDK SLI Adaptors <../../../submodules/ccsdk/sli/adaptors.git/docs/architecture.rst>
+   CCSDK SLI Service Logic Intrepreter <../../../submodules/ccsdk/sli/core.git/docs/architecture.rst>
+   CCSDK SLI Northbound Interface <../../../submodules/ccsdk/sli/northbound.git/docs/architecture.rst>
+   CCSDK SLI Plugins <../../../submodules/ccsdk/sli/plugins.git/docs/architecture.rst>
+
 Other
 -----
 
diff --git a/docs/guides/onap-developer/developing/index.rst b/docs/guides/onap-developer/developing/index.rst
index ec7ecaccb..d78f3f8fd 100644
--- a/docs/guides/onap-developer/developing/index.rst
+++ b/docs/guides/onap-developer/developing/index.rst
@@ -49,19 +49,19 @@ Common Controller Software Development Kit
 
    ../../../submodules/ccsdk/distribution.git/docs/index
    ../../../submodules/ccsdk/dashboard.git/docs/index
-   ../../../submodules/ccsdk/platform/plugins.git/docs/index
 
-.. Empty Folders for Release
-   ../../../submodules/ccsdk/parent.git/docs/index
+.. Being consolidated in ccsdk distribution
    ../../../submodules/ccsdk/platform/blueprints.git/docs/index
    ../../../submodules/ccsdk/platform/nbapi.git/docs/index
+   ../../../submodules/ccsdk/storage/esaas.git/docs/index
+   ../../../submodules/ccsdk/storage/pgaas.git/docs/index
+   ../../../submodules/ccsdk/utils.git/docs/index
+   ../../../submodules/ccsdk/parent.git/docs/index
+   ../../../submodules/ccsdk/platform/plugins.git/docs/index
    ../../../submodules/ccsdk/sli/adaptors.git/docs/index
    ../../../submodules/ccsdk/sli/core.git/docs/index
    ../../../submodules/ccsdk/sli/northbound.git/docs/index
    ../../../submodules/ccsdk/sli/plugins.git/docs/index
-   ../../../submodules/ccsdk/storage/esaas.git/docs/index
-   ../../../submodules/ccsdk/storage/pgaas.git/docs/index
-   ../../../submodules/ccsdk/utils.git/docs/index
 
 Data Collection, Analysis, and Events
 -------------------------------------
@@ -90,13 +90,6 @@ Documentation
 
    ../how-to-use-docs/index.rst
 
-External API Framework
-----------------------
-
-.. toctree::
-   :maxdepth: 2
-   :titlesonly:
-
 
 Holmes
 ------
@@ -151,7 +144,7 @@ Modeling
    ../../../submodules/modeling/modelspec.git/docs/index
    ../../../submodules/modeling/toscaparsers.git/docs/index
 
-MultiVIM CLoud
+MultiVIM Cloud
 --------------
 
 .. toctree::
@@ -171,23 +164,6 @@ ONAP Command Line Interface
    ../../../submodules/cli.git/docs/index
 
 
-ONAP Optimization Framework
----------------------------
-
-.. toctree::
-   :maxdepth: 2
-   :titlesonly:
-
-   ../../../submodules/optf/has.git/docs/index
-
-ONAP University
----------------
-
-.. toctree::
-   :maxdepth: 2
-   :titlesonly:
-
-
 ONAP Use Case User Interface
 ----------------------------
 
diff --git a/docs/guides/onap-developer/settingup/components.rst b/docs/guides/onap-developer/settingup/components.rst
new file mode 100644
index 000000000..e6aaf5fb7
--- /dev/null
+++ b/docs/guides/onap-developer/settingup/components.rst
@@ -0,0 +1,13 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+   http://creativecommons.org/licenses/by/4.0
+
+
+=========================================
+**Setting Up individual ONAP components**
+=========================================
+It is possible to deploy individual components.
+
+The documentation to install the various components is available here:
+
+TODO Link to installations
+
diff --git a/docs/guides/onap-developer/settingup/fullonap.rst b/docs/guides/onap-developer/settingup/fullonap.rst
new file mode 100644
index 000000000..61921add2
--- /dev/null
+++ b/docs/guides/onap-developer/settingup/fullonap.rst
@@ -0,0 +1,162 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+   http://creativecommons.org/licenses/by/4.0
+   Copyright 2017 ONAP
+
+
+.. contents::
+   :depth: 2
+..
+
+
+========================
+**Setting Up Full ONAP**
+========================
+
+.. _demo-installing-running-onap:
+
+**Context**
+===========
+ONAP may be deployed in different contexts depending on your requirements. The recommended installation for Amsterdam Release is currently based on Open Stack.
+
+Using the Amsterdam Release installer, ONAP components may be deployed in a single tenant or multiple tenants. One tenant for all the components except DCAE, and another tenant dedicated to the DCAE components. 
+
+The VNFs managed by ONAP may be deployed in different Open Stack tenants or based on top of VMware based infrastructure (cf MultiCloud project).
+
+Figure 1
+
+The current installation is based on the single tenant deployment (all the ONAP components will be hosted in a unique tenant)
+
+
+**Requirements**
+================
+
+OpenStack
+---------
+ONAP installation is validated on `OpenStack Ocata <https://releases.openstack.org/ocata/>`_ or latter release.
+
+The following Open Stack components must be deployed in the infrastructure:
+ - *Cinder*
+ - *Designate*
+ - *Glance*
+ - *Horizon*
+ - *Keystone*
+
+To deploy Open Stack, you can use various solutions:
+ - `OpenStack installer <https://docs.openstack.org/install-guide/>`_
+ - `OPNFV Cross Community Continuous Integration - XCI installer <http://docs.opnfv.org/en/latest/infrastructure/xci.html>`_
+
+*Designate* component is usually not deployed using standard OpenStack installers.
+Please find a guide to deploy and configure *Designate*
+
+Footprint
+---------
+The ONAP installation requires the following footprint:
+ - xx VM
+ - xxx vCPU
+ - xxx RAM
+ - xxx Storage
+ - xxx floating IP
+ - a public SSH key
+ - a private SSH key
+
+Note that floating IP may be private IP.
+
+Security
+--------
+The default installation assumes that the Default security group is configured to enable full access between the ONAP components.
+Depending on your environment, we may need to open some security groups (eg when using the portal from your desktop) 
+
+The following YAML file presents the ports exposed by the various components:
+
+.. code-block:: yaml
+
+ ---
+ aai:
+  - 8889
+
+TODO Generate the YAML file with installation
+
+TODO Provide a command to create the security groups
+
+**Deployment**
+==============
+
+Instantiation
+-------------
+- To deploy ONAP, use the Heat template and follow the described guidelines in integration project.
+
+- The Heat template deployment may take time (up to one hour) depending on your hardware environment.
+
+Test the installation
+---------------------
+Every ONAP component offers a HealthCheck REST API. The *Robot Virtual Machine* can be used to test that every components run smoothly.
+Run the following command to perform the HealthCheck:
+
+.. code-block:: bash
+
+  docker exec -it openecompete_container /var/opt/OpenECOMP_ETE/runTags.sh -i health h -d ./html -V /share/config/integration_robot_properties.py -V /share/config/integration_preload_parameters.py -V /share/config/vm_properties.py
+
+This testsuite will execute 31 tests towards the various ONAP components.
+
+Detect problems
+---------------
+If all the tests are not OK, many causes are possible.
+Here is a simple procedure to detect where the problem occurs:
+
+* Check the OpenStack Virtual Machine logs
+* Connect to the Virtual Machine and check that the various containers are running.
+
+The list of containers are described in the following section. In case some containers are missing, check the docker logs using the following command:
+
+.. code-block:: bash
+
+ sudo docker ps -a
+ sudo docker logs <containerid>
+
+
+**Portal configuration**
+========================
+The current ONAP installation is using the onap.org domain.
+To use the portal on your desktop, you must configure the following information in your *host* file (located in /etc/host for Linux or /windows/system32/drivers/etc/hosts for Windows):
+
+.. code-block:: bash
+
+ 104.239.249.17   policy.api.simpledemo.onap.org
+ 104.130.31.25    portal.api.simpledemo.onap.org
+ 104.239.249.15   sdc.api.simpledemo.onap.org
+ 104.130.170.142  vid.api.simpledemo.onap.org
+ 104.239.249.72   aai.api.simpledemo.onap.org
+ TODO ADD ui.aai
+
+You can use the Horizon dashboard to get the IP adresses associated with the Virtual Machines or use the following command line:
+
+.. code-block:: bash
+
+ openstack server list
+
+Launch the portal on the http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+
+Go to the Portal component user guide.
+
+Other UI documentation:
+ - CLAMP
+ - SDC Portal
+ - UI Case
+
+
+**Components**
+==============
+
+The following YAML file presents the list of containers for every Virtual Machine
+
+.. code-block:: yaml
+
+ aai:
+   - traversal
+   - be
+   - fe
+ appc
+   - fe
+
+
+
diff --git a/docs/guides/onap-developer/settingup/index.rst b/docs/guides/onap-developer/settingup/index.rst
index ed20d98c2..3dc8e5ce3 100644
--- a/docs/guides/onap-developer/settingup/index.rst
+++ b/docs/guides/onap-developer/settingup/index.rst
@@ -1,169 +1,14 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
-   http://creativecommons.org/licenses/by/4.0
-   Copyright 2017 ONAP
+.. http://creativecommons.org/licenses/by/4.0
+.. Copyright 2017 AT&T Intellectual Property.  All rights reserved.
 
 
-.. contents::
-   :depth: 2
-..
+Setting Up ONAP
+===============
 
-========================
-**Setting Up Full ONAP**
-========================
-
-
-**Context**
-===========
-ONAP may be deployed in different contexts depending on your requirements. The recommended installation for Amsterdam Release is currenly based on OpenStack.
-
-Using the Amsterdam Release installer, ONAP components may be deployed in a single tenant or multiple tenants. One tenant for all the components except DCAE, and another tenant dedicated to the DCAE components. 
-
-The VNFs managed by ONAP may be deployed in different OpenStack tenants or based on top of VMware based infrastructure (cf MultiCloud project).
-
-Figure 1 
-
-The current installation is based on the single tenant deployment (all the ONAP components will be hosted in a unique tenant)
-
-
-**Requirements**
-================
-
-OpenStack
----------
-ONAP installation is validated on `OpenStack Ocata <https://releases.openstack.org/ocata/>`_ or latter release.
-
-The following OpenStack components must be deployed in the infrastructure: 
- - *Cinder*
- - *Designate*
- - *Glance*
- - *Horizon*
- - *Keystone*
-
-To deploy OpenStack, you can use various solutions:
- - `OpenStack installer <https://docs.openstack.org/install-guide/>`_
- - `OPNFV Cross Community Continuous Integration - XCI installer <http://docs.opnfv.org/en/latest/infrastructure/xci.html>`_
-
-*Designate* component is usually not deployed using standard OpenStack installers.
-Please find a guide to deploy and configure *Designate* 
-
-Footprint
----------
-The ONAP installation requires the following footprint:
- - xx VM
- - xxx vCPU
- - xxx RAM
- - xxx Storage
- - xxx floating IP
- - a public SSH key
- - a private SSH key
-
-Note that floating IP may be private IP.
-
-Security
---------
-The default installation assumes that the Default security group is configured to enable full access between the ONAP components.
-Depending on your environment, we may need to open some security groups (eg when using the portal from your desktop) 
-
-The following YAML file presents the ports exposed by the various components:
-
-.. code-block:: yaml
-
- --- 
- aai: 
-  - 8889 
-
-TODO Generate the YAML file with installation
-
-TODO Provide a command to create the security groups
-
-**Deployment**
-==============
-
-Instantiation
--------------
-- To deploy ONAP, use the Heat template and follow the described guidelines in integration project.
-
-- The Heat template deployment may take time (up to one hour) depending on your hardware environment.
-
-Test the installation
----------------------
-Every ONAP component offers a HealthCheck REST API. The *Robot Virtual Machine* can be used to test that every components run smoothly.
-Run the following command to perform the HealthCheck:
-
-.. code-block:: bash
-
-  docker exec -it openecompete_container /var/opt/OpenECOMP_ETE/runTags.sh -i health h -d ./html -V /share/config/integration_robot_properties.py -V /share/config/integration_preload_parameters.py -V /share/config/vm_properties.py
-
-This testsuite will execute 31 tests towards the various ONAP components.
-
-Detect problems
----------------
-If all the tests are not OK, many causes are possible.
-Here is a simple procedure to detect where the problem occurs:
-
-* Check the OpenStack Virtual Machine logs 
-* Connect to the Virtual Machine and check that the various containers are runnings.
-
-The list of containers are described in the following section. In case some containers are missing, check the docker logs using the following command:
-
-.. code-block:: bash
-
- sudo docker ps -a
- sudo docker logs <containerid>
-
-
-**Portal configuration**
-========================
-The current ONAP installation is using the onap.org domain.
-To use the portal on your desktop, you must configure the following information in your *host* file (located in /etc/host for Linux or /windows/system32/drivers/etc/hosts for Windows):
-
-.. code-block:: bash
-
- 104.239.249.17   policy.api.simpledemo.onap.org
- 104.130.31.25    portal.api.simpledemo.onap.org
- 104.239.249.15   sdc.api.simpledemo.onap.org
- 104.130.170.142  vid.api.simpledemo.onap.org
- 104.239.249.72   aai.api.simpledemo.onap.org 
- TODO ADD ui.aai
-
-You can use the Horizon dashboard to get the IP adresses associated with the Virtual Machines or use the following command line:
-
-.. code-block:: bash
-
- openstack server list
-
-Launch the portal on the http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
-
-Go to the Portal component user guide.
-
-Other UI documentation:
- - CLAMP
- - SDC Portal
- - UI Case
-
-
-**Components**
-==============
-
-The following YAML file presents the list of containers for every Virtual Machine
-
-.. code-block:: yaml
-
- aai:
-   - traversal
-   - be
-   - fe
- appc
-   - fe
-
-
-
-========================================
-**Setting Up indiviual ONAP components**
-========================================
-It is possible to deploy individual components.
-
-The documentation to install the various components is available here:
-
-TODO Link to installations
+.. toctree::
+   :maxdepth: 1
+   :titlesonly:
 
+   fullonap.rst
+   components.rst
diff --git a/docs/guides/onap-developer/tutorials/index.rst b/docs/guides/onap-developer/tutorials/index.rst
index 4519eaebc..a4bcbaef2 100644
--- a/docs/guides/onap-developer/tutorials/index.rst
+++ b/docs/guides/onap-developer/tutorials/index.rst
@@ -7,5 +7,3 @@ Tutorials
    :maxdepth: 1
    :titlesonly:
 
-   
-   platform/index.rst
diff --git a/docs/guides/onap-developer/tutorials/platform/index.rst b/docs/guides/onap-developer/tutorials/platform/index.rst
deleted file mode 100644
index 75cbadfa0..000000000
--- a/docs/guides/onap-developer/tutorials/platform/index.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0
-   International License. http://creativecommons.org/licenses/by/4.0
-   Copyright 2017 AT&T Intellectual Property.  All rights reserved.
-
-.. _demo-installing-running-onap:
-
-Installing & Running ONAP
-=========================