Changed User Design Guides to reflect the changes in the SDC in Frankfurt

Small additional changes

Issue-ID: DOC-593

Signed-off-by: andreasgeissler <andreas-geissler@telekom.de>
Change-Id: I8556005e91ebd2d5249c57200d5887b043a173a0

8 files changed, 132 insertions, 117 deletions

diff --git a/docs/guides/onap-user/design/service-design/index.rst b/docs/guides/onap-user/design/service-design/index.rst
index 4a68a9c6c..fc290cb27 100644
--- a/docs/guides/onap-user/design/service-design/index.rst
+++ b/docs/guides/onap-user/design/service-design/index.rst
@@ -12,7 +12,7 @@ instantiate, and manage services. Validate and certify the services.
 
 **Tool:** SDC
 
-**SDC user roles:** Designer, Tester
+**SDC user roles:** Designer
 
 |image1|
 
@@ -20,34 +20,37 @@ instantiate, and manage services. Validate and certify the services.
 
 **Steps**
 
-   #. `Create a Service`_
-   #. `Create a Workflow [optional]`_
+   #. `Create Service`_
+   #. `Create a Management Workflow [optional]`_
    #. `Create a Network Callflow [optional]`_
-   #. `Select VID Inputs [optional]`_
-   #. `Update a Service [optional]`_
-   #. `Submit a Service for Testing`_
-   #. `Test a Service`_
-   #. `Assign an IP Address Plan`_
+   #. `Add Service Inputs [optional]`_
+   #. `Update Service [optional]`_
+   #. `Certify Service`_
 
-Create a Service
-----------------
+.. _doc_guide_user_des_ser-cre_serv:
 
-**Prerequisites:** Create VFs required for this service (see :ref:`doc_guide_user_des_vf-cre`).
+Create Service
+--------------
+
+**Prerequisites:** Create VF/PNFs required for this service (see :ref:`doc_guide_user_des_vf-cre`).
+
+#. From the SDC HOME page, hover over Add and select *ADD SERVICE*.
+
+   |image0|
 
-#. From the SDC HOME page, hover over Add and select Add Service.
 #. In the General section, complete all fields.
 
-   Note: Use the letters "Svc" in the name to indicate that the
-   component is a service.
+   |image5|
 
 #. Click Create.
 
-   A message displays when VF creation is complete.
+   A message displays when Service creation is complete.
 
 #. Click Composition.
 
-   For a description of the Composition section (see \ `Composition
-   (Service design) <https://wiki.onap.org/x/lIwP>`__ ).
+   |image6|
+
+   For a description of the Composition section (see SDC User Guide ).
 
 #. Drag one or more elements from the Elements palette to the canvas.
 #. To connect elements:
@@ -62,7 +65,7 @@ Create a Service
 
 #. To add artifacts at the service level:
 
-   #. Click an empty area in the canvas and click Deployment Artifacts
+   #. Click an empty area in the canvas and click *Deployment Artifacts*
       (right pane).
    #. Click \ |image3|.
    #. Select the type.
@@ -72,41 +75,50 @@ Create a Service
 
    Use this function to add YANG artifacts for distribution to SDNC.
 
-#. Click Check In to save changes.
+#. [Optional]  At any time before checking in the Service, click
+   these options to update Service information:
+
+   .. note:: These tasks can be done only before certifying the Service.
+
+   - **General->Icon** change the icon associated with the Service
+   - **TOSCA Artifacts** view and edit artifacts, such as the .csar file
+     and TOSCA template
+   - **Composition** view or edit the graphical representation of the
+     service-level TOSCA model
+   - **Activity Log** view activity related to the Service
+     (displays the action, date, user, status, and any comments related to each
+     action)
+   - **Management Workflow** model service lifecycle workflows for execution
+     in SO (see `Create a Management Workflow [optional]`_)
+   - **Network Call Flow** model interactions among VFs (see `Create a
+      Network Callflow [optional]`_)
+   - **Deployment** view HEAT modules in VSPs
+   - **Properties Assignment** define or update properties,
+     policies and input parameters used during Service instantiation
+     (see `Add Service Inputs [optional]`_).
+   - **Monitoring** ...
+
+#. Click *Check In* to save changes.
 
    A box displays for confirming the changes.
 
 #. Enter a comment and click OK.
 
-   A message displays when the VF is checked in.
+   A message displays when the Service is checked in and the
+   Home page is displayed.
 
-#. [Optional] At any time before submitting the service for testing,
-   click these options to update service information:
-
-   -  Icon — change the icon associated with the service
-   -  TOSCA Artifacts — view and edit artifacts, such as the .csar file
-      and TOSCA template
-   -  Composition — view or edit the graphical representation of the
-      service-level TOSCA model
-   -  Activity Log — view activity related to the service
-   -  Workflow — model service lifecycle workflows for execution in SO
-      (see `Create a Workflow [optional]`_)
-   -  Network Call Flow — model interactions among VFs (see `Create a
-      Network Callflow [optional]`_)
-   -  Deployment — view HEAT modules in VSPs
-   -  Inputs — select parameters as input fields during VID
-      instantiation (see `Select VID Inputs [optional]`_).
+#. After creating a service and configuring optional fields, certify it
+   (see `Certify Service`_).
 
-#. After creating a service and configuring optional fields, submit it
-   for testing (see `Submit a Service for Testing`_).
-
-Note: Create Service can now be invoked via External SDC API also.
+Note: Create Service can also be invoked via External SDC API.
 Refer SDC REST API reference for details of the API.
 Currently, only a 'Partner Domain Service' category is supported
 which cannot be created manually from SDC portal.
 
-Create a Workflow [optional]
-----------------------------
+.. _doc_guide_user_des_ser-cre_wf:
+
+Create a Management Workflow [optional]
+---------------------------------------
 
 Create a workflow to model the SO recipes of the service life cycle such
 as instantiation, upgrade, termination, or suspension of a service or
@@ -120,11 +132,16 @@ format and included in distributed service model.
 **Prerequisites:** All the required ActivitySpec as supported by SO
  are registered in SDC.
 
-#. From the SDC HOME page, click WORKFLOW.
-#. Click Add Workflow.
-#. The Create New Workflow box displays.
+#. From the SDC HOME page, click CATALOG and search for a service.
+#. Click the service and click *Check Out*.
+#. Select the panel *Management Workflow*.
+#. Click *Add Workflow*.
+#. The *Create New Workflow* box displays.
 #. Complete all fields.
 #. Click Create.
+
+   |image7|
+
 #. Specify Inputs & Outputs of Workflow
 #. Define the Composition of Workflow.
 
@@ -138,6 +155,8 @@ format and included in distributed service model.
 #. Click Save.
 #. Certify the Workflow.
 
+.. _doc_guide_user_des_ser-cre_nfw:
+
 Create a Network Callflow [optional]
 ------------------------------------
 
@@ -148,10 +167,10 @@ being consumed. In the model, lifelines represent VFs.
 Note: The information collected in this section is not distributed with
 the service model.
 
-**Prerequisites:** `Create a service`_
+**Prerequisites:** `Create service`_
 
-#. From the SDC HOME page, click CATALOG and search for a service.
-#. Click the service and click Check Out.
+#. From the SDC HOME page, click CATALOG and search for the service.
+#. Click the service and click *Check Out*.
 #. Click Network Call Flow.
 #. Click Add Workflow.
    The Create New Workflow box displays.
@@ -182,35 +201,44 @@ the service model.
 
 #. [Optional] Change the order of steps by clicking a step and dragging
    it to the preferred position.
-#. Click Save.
-#. Click Check In to save changes.
+#. Click *Save*.
+#. Click *Check In* to save changes.
+
+.. _doc_guide_user_des_ser-para_in:
 
-Select VID Inputs [optional]
-----------------------------
+Add Service Inputs [optional]
+-----------------------------
 
-Select parameters as input fields during
-`VID <https://wiki.onap.org/display/DW/Glossary#Glossary-VID>`__
-instantiation.
+Select parameters as input fields during Service instantiation.
 
-Note: For questions about how to use this section, contact the Service
-Design and Creation team (see \ `Mailing
-Lists <https://wiki.onap.org/display/DW/Mailing+Lists>`__).
 
-**Prerequisites:** `Create a service`_
+**Prerequisites:** `Create service`_
 
 #. From the SDC HOME page, click CATALOG and search for a service.
-#. Click the service and click Check Out.
-#. Click Inputs.
-#. From the Resource instance inputs pane, expand the name of a
-   resource.
-#. Select inputs by clicking the check box in each row as required.
+#. Click the service and click *Check Out*.
+#. Click *Properties Assignment*.
+
+   |image8|
+
+#. From the *Composition* pane, select the *SELF* object
+   representing the service.
+#. In the *Properties* the existing Service properites are shown
+#. With *+Add Property* you can add a new property
+#. To set a property as *Input* parameter, select the parameter
+   by clicking the check box in each row as required.
    Note: Do not select inputs that are already in the ENV file (this
    overwrites values specified in the ENV).
-#. Click \ |image4| to move selected inputs to the Service inputs pane.
-#. Click Check In to save changes.
 
-Update a Service [optional]
----------------------------
+   |image9|
+
+#. Click *Declare Input* to add the selected parameter to the
+   Service *Input* pane.
+#. Click *Check In* to save changes.
+
+.. _doc_guide_user_des_ser-upd_serv:
+
+Update Service [optional]
+-------------------------
 
 Update service information and artifacts.
 
@@ -220,85 +248,72 @@ updated (see step 4).
 **Prerequisites:**
 
 -  Create a service.
--  If a VF included in the service was updated: see "Update a VF
-   [optional]" and "Test a VF".
+-  If a VF included in the service was updated:
+   see :ref:`doc_guide_user_des_vf-cre_vf-upd`
 
-#. From the SDC HOME page, click CATALOG and search for a service.
-#. Click the service and click Check Out.
+#. From the SDC HOME page, click CATALOG and search for the service.
+#. Click the service and click *Check Out*.
 #. Click Composition.
 #. To update the version of a VF referenced in the service:
 
    #. Click Composition.
    #. Click the VF in the canvas.
-   #. On the General Info tab (right pane), select the VF version.
+   #. On the *General Info* tab (right pane), select the VF version.
 
 #. To update artifacts at the service level:
 
-   #. Click an empty area in the canvas and click Deployment Artifacts
+   #. Click an empty area in the canvas and click *Deployment Artifacts*
       (right pane).
    #. View, add, delete, or download artifacts as required.
 
 #. [Optional] Add, edit, or remove VFs that comprise the service
-   reference architecture (see steps 4 to 6 in \ `Create a Service`_).
-#. [Optional] Click Operations to edit Service Operations.
+   reference architecture (see steps 4 to 6 in \ `Create Service`_).
+#. [Optional] Click *Operations* to edit Service Operations.
 
    #. Create/Edit Operations
    #. Assign Workflow
    #. Click Save
 
-#. [Optional] Click Management Callflow to edit, upload, or delete
-   associated deployment artifacts (see "Create a Management Workflow [optional]").
-#. [Optional] Click Network Callflow to edit the interactions among VFs
+#. [Optional] Click *Management Workflow* to edit, upload, or delete
+   associated deployment artifacts
+   (see `Create a Management Workflow [optional]`_).
+#. [Optional] Click *Network Callflow* to edit the interactions among VFs
    that comprise the service (see `Create a Network Callflow [optional]`_).
-#. [Optional] Click Inputs to select parameters as input fields during
-   VID instantiation (see `Select VID Inputs [optional]`_).
-#. Click Check In to save changes.
-#. After updating a service and configuring optional fields, submit it
-   for testing (see `Submit a Service for Testing`_).
+#. [Optional] Click *Properties Assignement* to select parameters as
+   input fields during Service instantiation
+   (see `Add Service Inputs [optional]`_).
+#. Click *Check In* to save changes.
+#. After updating a service and configuring optional fields, certify it
+   (see `Certify Service`_).
 
-Submit a Service for Testing
-----------------------------
+.. _doc_guide_user_des_ser-cfy_serv:
+
+Certify Service
+---------------
 
 Note: A service cannot be submitted for testing if the reference
 architecture contains uncertified resources.
 
-**Prerequisites:** `Create a Service`_
-
-#. When a service is ready for testing, click CATALOG and search for the
-   service.
-#. Click the service and click Submit for Testing.
-   A box displays for sending a message to the testers.
-#. Enter a message for the testers asking that they begin service
-   certification and click OK.
-
-   The default mail client launches with a draft email containing the
-   message from step 2.
-
-#. Add the email addresses of the people on the Certification Group with
-   the Tester role and send the email.
+**Prerequisites:** `Create Service`_
 
-Test a Service
---------------
-
-Test the design and associated artifacts of a service.
+**Steps**
 
-**Prerequisites:** `Submit a Service for Testing`_.
+#. When a Service is ready for certification,
+   click *CATALOG* and search for the checked-in Service.
+#. Click the Service and click *Certify*.
 
-#. Sign in to SDC as a Tester.
-#. From the HOME page, select Ready For Testing under Active Projects.
-#. In the right pane, click the service to test.
-#. Click Start Testing.
-#. Test the service.
-#. When testing is complete, click Accept.
+#. Enter a comment and click *OK*.
 
-Assign an IP Address Plan
--------------------------
+#. A Message appears, that the Service is certified.
 
-Assigning an IP address plan is specific to each OpenECOMP installation.
-The object: to assign a Service's key to a "plan" for allocating IP
-addresses.
 
-.. |image1| image:: media/design_service_workflow.png
+.. |image0| image:: media/sdc-home.png
+.. |image1| image:: media/sdc-service-workflow.png
 .. |image2| image:: media/design_asdccanvas_connect_elements.png
 .. |image3| image:: media/design_service_adddeploymentartifact.png
 .. |image4| image:: media/design_service_inputs_move.png
+.. |image5| image:: media/sdc-service-general.png
+.. |image6| image:: media/sdc-service-composition.png
+.. |image7| image:: media/sdc-service-workflow.png
+.. |image8| image:: media/sdc-service-properties.png
+.. |image9| image:: media/sdc-service-properties-input.png
\ No newline at end of file
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-home.png b/docs/guides/onap-user/design/service-design/media/sdc-home.png
new file mode 100644
index 000000000..3b14c99e0
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-home.png
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png b/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png
new file mode 100644
index 000000000..4ac0d490c
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-service-composition.png
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-general.png b/docs/guides/onap-user/design/service-design/media/sdc-service-general.png
new file mode 100644
index 000000000..4bb65d71e
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-service-general.png
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png b/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png
new file mode 100644
index 000000000..2296fd350
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-service-properties-input.png
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png b/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png
new file mode 100644
index 000000000..0dc111eac
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-service-properties.png
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png
new file mode 100644
index 000000000..03867f954
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow-design.png
diff --git a/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png
new file mode 100644
index 000000000..7caf98122
--- /dev/null
+++ b/docs/guides/onap-user/design/service-design/media/sdc-service-workflow.png