Renaming files in documentation guide

Renamed files containing introduction, setting up, and converting to RST chapters to reflect content.

Issue-ID: DOC-639

Change-Id: I5353fbf52dc635ee43464eb3284c13cedcaf6fa6
Signed-off-by: Andrea Visnyei <andrea.visnyei@nokia.com>

1 files changed, 0 insertions, 551 deletions

diff --git a/docs/guides/onap-developer/how-to-use-docs/include-documentation.rst b/docs/guides/onap-developer/how-to-use-docs/include-documentation.rst
deleted file mode 100644
index 91f530983..000000000
--- a/docs/guides/onap-developer/how-to-use-docs/include-documentation.rst
+++ /dev/null
@@ -1,551 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0
-.. International License. http://creativecommons.org/licenses/by/4.0
-.. Copyright 2017 AT&T Intellectual Property.  All rights reserved.
-
-
-Setting Up
-==========
-
-ONAP documentation is stored in git repositories, changes are managed
-with gerrit reviews, and published documents generated when there is a
-change in any source used to build the documentation.
-
-Authors create source for documents in reStructured Text (RST) that is
-rendered to HTML and published on Readthedocs.io.
-The developer Wiki or other web sites can reference these rendered
-documents directly allowing projects to easily maintain current release
-documentation.
-
-Some initial set up is required to connect a project with
-the master document structure and enable automated publishing of
-changes as summarized in the following diagram and description below
-below.
-
-.. seqdiag::
-   :height: 700
-   :width: 1000
-
-   seqdiag {
-     DA [label = "Doc Project\nAuthor/Committer",   color=lightblue];
-     DR [label = "Doc Gerrit Repo" ,                     color=pink];
-     PR [label = "Other Project\nGerrit Repo",          color=pink ];
-     PA [label = "Other Project\nAuthor/Committer", color=lightblue];
-
-     PA  ->   DR [label = "Add project repo as\ngit submodule" ];
-     DR  ->   DA [label = "Review & Plan to\nIntegrate Content with\nTocTree Structure" ];
-     DR  <--  DA [label = "Vote +2/Merge" ];
-     PA  <--  DR [label = "Merge Notification" ];
-     PA  ->   PR [label = "Create in project repo\ntop level directory and index.rst" ];
-     PR  ->   DA [label = "Add as Reviewer" ];
-     PR  <--  DA [label = "Approve and Integrate" ];
-     PA  <--  PR [label = "Merge" ];
-     }
-
-Setup project repositories
---------------------------
-These steps are performed for each project repository that
-provides documentation.
-
-1. Set two variables that will be used in the subsequent steps.
-Set *reponame* to the project repository you are setting up
-just as it appears in the **Project Name** column of
-the Gerrit projects page.
-Set *lfid* to your Linux Foundation identity that you use to
-login to gerrit or for git clone requests over ssh.
-
-.. code-block:: bash
-
-   reponame=
-   lfid=
-
-2. Add a directory in the doc project where your
-project will be included as a submodule and at least one reference
-from the doc project to the documentation index in your repository.
-The following sequence will do this over ssh. Please note that the
-reference to your project in *repolist.rst* should be considered
-temporary and removed when you reference it from more appropriate
-place.
-
-.. caution::
-
-   If your access network restricts ssh, you will need to use equivalent
-   git commands and HTTP Passwords as described `here <http://wiki.onap.org/x/X4AP>`_.
-
-.. caution::
-
-   Don't replace ../ in *git submodule add* with any relative path on
-   your local file system. It refers to the location of your repository
-   on the server.
-
-.. code-block:: bash
-
-   git clone ssh://$lfid@gerrit.onap.org:29418/doc
-   cd doc
-   mkdir -p `dirname docs/submodules/$reponame`
-   git submodule add ../$reponame docs/submodules/$reponame.git
-   git submodule init docs/submodules/$reponame.git
-   git submodule update docs/submodules/$reponame.git
-
-   echo "   $reponame <../submodules/$reponame.git/docs/index>" >> docs/release/repolist.rst
-
-   git add .
-   git commit -s
-   git review
-
-.. caution::
-   Wait for the above change to be merged before any merge to the
-   project repository that you have just added as a submodule.
-   If the project repository added as submodule changes before the
-   doc project merge, git may not automatically update the submodule
-   reference on changes and/or the verify job will fail in the step below.
-
-
-3. Create a docs directory in your repository with
-an index.rst file.  The following sequence will complete the minimum
-required over ssh.  As you have time to convert or add new content you
-can update the index and add files under the docs folder.
-
-.. hint::
-   If you have additional content, you can include it by editing the
-   index.rst file and/or adding other files before the git commit.
-   See `Templates and Examples`_ below and :ref:`converting-to-rst`
-   for more information.
-
-
-.. code-block:: bash
-
-   git clone ssh://$lfid@gerrit.onap.org:29418/$reponame
-   cd $reponame
-   mkdir docs
-   echo ".. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-   TODO Add files to toctree and delete this header
-   ------------------------------------------------
-   .. toctree::
-      :maxdepth: 1
-
-   " >  docs/index.rst
-
-   git add .
-   git commit -s
-   git review
-
-
-The diagram below illustrates what is accomplished in the setup steps
-above from the perspective of a file structure created for a local test,
-a jenkins verify job, and/or published release documentation including:
-
-- ONAP gerrit project repositories,
-
-- doc project repository master document index.rst, templates,
-  configuration, and other documents
-
-- submodules directory where other project repositories and
-  directories/files are referenced
-
-- file structure: directories (ellipses), files(boxes)
-
-- references: directory/files (solid edges), git submodule
-  (dotted edges), sphinx toctree (dashed edges)
-
-.. graphviz::
-
-
-   digraph docstructure {
-   size="8,12";
-   node [fontname = "helvetica"];
-   // Align gerrit repos and docs directories
-   {rank=same doc aaf aai reponame repoelipse vnfsdk vvp}
-   {rank=same confpy release templates masterindex submodules otherdocdocumentelipse}
-   {rank=same releasedocumentindex releaserepolist}
-
-   //Illustrate Gerrit Repos and provide URL/Link for complete repo list
-   gerrit [label="gerrit.onap.org/r", href="https://gerrit.onap.org/r/#/admin/projects/" ];
-   doc [href="https://gerrit.onap.org/r/gitweb?p=doc.git;a=tree"];
-   gerrit -> doc;
-   gerrit -> aaf;
-   gerrit -> aai;
-   gerrit -> reponame;
-   gerrit -> repoelipse;
-             repoelipse [label=". . . ."];
-   gerrit -> vnfsdk;
-   gerrit -> vvp;
-
-   //Show example of local reponame instance of component info
-   reponame -> reponamedocsdir;
-   reponamesm -> reponamedocsdir;
-                    reponamedocsdir [label="docs"];
-   reponamedocsdir -> repnamedocsdirindex;
-                         repnamedocsdirindex [label="index.rst", shape=box];
-
-   //Show detail structure of a portion of doc/docs
-   doc  -> docs;
-   docs -> confpy;
-           confpy [label="conf.py",shape=box];
-   docs -> masterindex;
-           masterindex [label="Master\nindex.rst", shape=box];
-   docs -> release;
-   docs -> templates;
-   docs -> otherdocdocumentelipse;
-           otherdocdocumentelipse [label="...other\ndocuments"];
-   docs -> submodules
-
-   masterindex -> releasedocumentindex [style=dashed, label="sphinx\ntoctree\nreference"];
-
-   //Show submodule linkage to docs directory
-   submodules -> reponamesm [style=dotted,label="git\nsubmodule\nreference"];
-                 reponamesm [label="reponame.git"];
-
-   //Example Release document index that references component info provided in other project repo
-   release -> releasedocumentindex;
-              releasedocumentindex [label="index.rst", shape=box];
-   releasedocumentindex -> releaserepolist [style=dashed, label="sphinx\ntoctree\nreference"];
-        releaserepolist  [label="repolist.rst", shape=box];
-   release -> releaserepolist;
-   releaserepolist -> repnamedocsdirindex [style=dashed, label="sphinx\ntoctree\nreference"];
-
-   }
-
-Branches in the DOC Project
----------------------------
-
-The DOC project 'master' branch aggregates the 'latest' content
-from all ONAP project repositories contributing documentation into a
-single tree file structure as described in the previous section.  This
-branch is continuously integrated and deployed at Read The
-Docs as the 'latest' ONAP Documentation by:
-
-* Jenkins doc-verify-rtd and doc-merge-rtd jobs triggered whenever patches on
-  contributing repositories contain rst files at or below a top level
-  'docs' folder.
-
-* Subscription in the DOC project to changes in submodule repositories.
-  These changes appear in the DOC project as commits with title
-  'Updated git submodules' when a change to a contributing project
-  repository is merged.  No DOC project code review occurs, only a
-  submodule repository commit hash is updated to track the head of each
-  contributing master branch.
-
-For each ONAP named release the DOC project creates a branch with the
-release name.  The timing of the release branch is determined by
-work needed in the DOC project to prepare the release branch and the
-amount of change unrelated to the release in the master branch.
-For example contributing projects that create named release branches
-early to begin work on the next release and/or contributing projects
-to the master that are not yet part of the named release would result
-in an earlier named release branch to cleanly separate work to stabilize
-a release from other changes in the master branch.
-
-A named release branch is integrated and deployed at Read The Docs
-as the 'named release' by aggregating content from contributing
-project repositories.  A contributing project repository can
-choose one of the following for the 'named release' branch:
-
-* Remove the contributing project repository submodule and RST
-  references when not part of the named release.
-
-* Provide a commit hash or tag for the contributing project master
-  branch to be used for the life of the release branch or until a
-  request is submitted to change the commit hash or tag.
-
-* Provide the commit hash for the head of a named release branch
-  created in the contributing project repository.  This option
-  may be appropriate if frequent changes are expected over the
-  life of the named release and work the same way as the continuous
-  integration and deployment described for the master branch.
-
-The decision on option for each contributing project repository
-can be made or changed before the final release is approved.  The
-amount of change and expected differences between master and a
-named release branch for each repository should drive the choice of
-option and timing.
-
-About GIT branches
-------------------
-
-GIT is a powerful tool allowing many actions, but without respecting some rules
-the GIT structure can be quickly hard to maintain.
-
-Here are some conventions about GIT branches:
-
-  - ALWAYS create a local branch to edit or create any file. This local branch
-    will be considered as a topic in Gerrit and allow contributors to
-    work at the same time on the same project.
-
-  - 1 feature = 1 branch. In the case of documentation, a new chapter
-    or page about a new code feature can be considered as a 'doc feature'
-
-  - 1 bug = 1 branch. In the case of documentation, a correction on an
-    existing sentence can be considered as a 'doc bug'
-
-  - the master branch is considered as "unstable", containing new features that
-    will converge to a stable situation for the release date.
-
-The day of the release, the repository owner will create a new branch to
-fix the code and documentation. This will represent the 'stable' code of the
-release. In this context:
-
-  - NEVER push a new feature on a stable branch
-
-  - Only bug correction are authorized on a stable branch using
-    cherry pick method
-
-.. image:: git_branches.png
-
-Creating Restructured Text
-==========================
-
-Templates and Examples
-----------------------
-Templates are available that capture the kinds of information
-useful for different types of projects and provide some examples of
-restructured text.  We organize templates in the following way to:
-
- - help authors understand relationships between documents
-
- - keep the user audience context in mind when writing and
-
- - tailor sections for different kinds of projects.
-
-
-**Sections** Represent a certain type of content. A section
-is **provided** in an project repository, to describe something about
-the characteristics, use, capability, etc. of things in that repository.
-A section may also be **referenced** from other sections and in
-other repositories.  For example, an API specification provided in a project
-repository might be referenced to in a Platform API Reference Guide.
-The notes in the beginning of each section template provide
-additional detail about what is typically covered and where
-there may be references to the section.
-
-**Collections** Are a set of sections that are typically provided
-for a particular type of project, repository, guide, reference manual, etc.
-For example, a collection for a platform component, an SDK, etc.
-
-You can: browse the template *collections* and *sections* below;
-show source to look at the Restructured Text and Sphinx directives used;
-copy the source either from a browser window or by downloading the
-file in raw form from
-the `gerrit doc repository <https://gerrit.onap.org/r/gitweb?p=doc.git;a=tree;f=docs/templates;/>`_ and
-then add them to your repository docs folder and index.rst.
-
-
-Sections
-++++++++
-
-.. toctree::
-   :maxdepth: 1
-   :glob:
-
-   ../../../templates/sections/*
-
-
-Collections
-+++++++++++
-
-.. toctree::
-   :maxdepth: 1
-   :glob:
-
-   ../../../templates/collections/*
-
-
-
-In addition to these simple templates and examples
-there are many open source projects (e.g. Open Daylight, Open Stack)
-that are using Sphinx and Readthedocs where you may find examples
-to start with.  Working with project teams we will continue to enhance
-templates here and capture frequently asked questions on the developer
-wiki question topic `documentation <https://wiki.onap.org/questions/topics/16384055/documentation>`_.
-
-Each project should:
-
- - decide what is relevant content
-
- - determine the best way to create/maintain it in the CI/CD process and
-
- - work with the documentation team to reference content from the
-   master index and guides.
-
-Consider options including filling in a template, identifying existing
-content that can be used as is or easily converted, and use of Sphinx
-directives/extensions to automatically generate restructured text
-from other source you already have.
-
-Links and References
---------------------
-It's pretty common to want to reference another location in the
-ONAP documentation and it's pretty easy to do with
-reStructuredText. This is a quick primer, more information is in the
-`Sphinx section on Cross-referencing arbitrary locations
-<http://www.sphinx-doc.org/en/stable/markup/inline.html>`_.
-
-Within a single document, you can reference another section simply by::
-
-   This is a reference to `The title of a section`_
-
-Assuming that somewhere else in the same file there a is a section
-title something like::
-
-   The title of a section
-   ^^^^^^^^^^^^^^^^^^^^^^
-
-It's typically better to use ``:ref:`` syntax and labels to provide
-links as they work across files and are resilient to sections being
-renamed. First, you need to create a label something like::
-
-   .. _a-label:
-
-   The title of a section
-   ^^^^^^^^^^^^^^^^^^^^^^
-
-.. note:: The underscore (_) before the label is required.
-
-Then you can reference the section anywhere by simply doing::
-
-    This is a reference to :ref:`a-label`
-
-or::
-
-    This is a reference to :ref:`a section I really liked <a-label>`
-
-.. note:: When using ``:ref:``-style links, you don't need a trailing
-          underscore (_).
-
-Because the labels have to be unique, it usually makes sense to prefix
-the labels with the project name to help share the label space, e.g.,
-``sfc-user-guide`` instead of just ``user-guide``.
-
-Testing
-=======
-
-One RST File
-------------
-It is recommended that all rst content is validated by `doc8 <https://pypi.python.org/pypi/doc8>`_ standards.
-To validate your rst files using doc8, install doc8.
-
-.. code-block:: bash
-
-   sudo pip install doc8
-
-doc8 can now be used to check the rst files. Execute as,
-
-.. code-block:: bash
-
-   doc8 --ignore D000,D001 <file>
-
-
-
-One Project
------------
-To test how the documentation renders in HTML, follow these steps:
-
-Install `virtual environment <https://pypi.org/project/virtualenv>`_ & create one.
-
-.. code-block:: bash
-
-   sudo pip install virtualenv
-   virtualenv onap_docs
-
-Activate `onap_docs` virtual environment.
-
-.. code-block:: bash
-
-   source onap_docs/bin/activate
-
-.. note:: Virtual environment activation has to be performed before attempting to build documentation.
-          Otherwise, tools necessary for the process might not be available.
-
-Download a project repository.
-
-.. code-block:: bash
-
-   git clone http://gerrit.onap.org/r/<project>
-
-Download the doc repository.
-
-.. code-block:: bash
-
-   git clone http://gerrit.onap.org/r/doc
-
-Change directory to doc & install requirements.
-
-.. code-block:: bash
-
-   cd doc
-   pip install -r etc/requirements.txt
-
-.. warning::
-
-	Just follow the next step (copying conf.py from Doc project to your project) 
-	if that is your intention, otherwise skip it. Currently all projects should already have a conf.py file. 
-	Through the next step, this file and potential extensions in your project get overriden.
-
-Copy the conf.py file to your project folder where RST files have been kept:
-
-.. code-block:: bash
-
-   cp docs/conf.py <path-to-project-folder>/<folder where are rst files>
-
-Copy the static files to the project folder where RST files have been kept:
-
-.. code-block:: bash
-
-   cp -r docs/_static/ <path-to-project-folder>/<folder where are rst files>
-
-Build the documentation from within your project folder:
-
-.. code-block:: bash
-
-   sphinx-build -b html <path-to-project-folder>/<folder where are rst files> <path-to-output-folder>
-
-Your documentation shall be built as HTML inside the
-specified output folder directory.
-
-You can use your Web Browser to open
-and check resulting html pages in the output folder.
-
-.. note:: Be sure to remove the `conf.py`, the static/ files and the output folder from the `<project>/docs/`. This is for testing only. Only commit the rst files and related content.
-
-.. _building-all-documentation:
-
-All Documentation
------------------
-To build the all documentation under doc/, follow these steps:
-
-Install `tox <https://pypi.org/project/tox>`_.
-
-.. code-block:: bash
-
-   sudo pip install tox
-
-Download the DOC repository.
-
-.. code-block:: bash
-
-   git clone http://gerrit.onap.org/r/doc
-
-Build documentation using tox local environment & then open using any browser.
-
-.. code-block:: bash
-
-   cd doc
-   tox -elocal
-   firefox docs/_build/html/index.html
-
-.. note:: Make sure to run `tox -elocal` and not just `tox`.
-   This updates all submodule repositories that are integrated
-   by the doc project.
-
-There are additional tox environment options for checking External
-URLs and Spelling. Use the tox environment options below and then
-look at the output with the Linux `more` or similar command
-scan for output that applies to the files you are validating.
-
-.. code-block:: bash
-
-   tox -elinkcheck
-   more <  docs/_build/linkcheck/output.txt
-
-   tox -espellcheck
-   more <  docs/_build/spellcheck/output.txt