diff options
Diffstat (limited to 'src/main/swm/common')
-rw-r--r-- | src/main/swm/common/common.env | 21 | ||||
-rw-r--r-- | src/main/swm/common/deinstall.env | 1 | ||||
-rw-r--r-- | src/main/swm/common/deinstall_postproc.sh | 26 | ||||
-rw-r--r-- | src/main/swm/common/deinstall_preproc.sh | 26 | ||||
-rw-r--r-- | src/main/swm/common/install.env | 1 | ||||
-rw-r--r-- | src/main/swm/common/install_postproc.sh | 26 | ||||
-rw-r--r-- | src/main/swm/common/install_preproc.sh | 26 | ||||
-rw-r--r-- | src/main/swm/common/localize.sh | 170 |
8 files changed, 297 insertions, 0 deletions
diff --git a/src/main/swm/common/common.env b/src/main/swm/common/common.env new file mode 100644 index 0000000..e788212 --- /dev/null +++ b/src/main/swm/common/common.env @@ -0,0 +1,21 @@ +export ROOT_DIR=${INSTALL_ROOT}opt/app/workload/fe3c/cambria + +OS=`uname` + +if [ "${OS}" = "SunOS" ]; then + CURRENT_USER=`/usr/xpg4/bin/id -un` + CURRENT_GROUP=`/usr/xpg4/bin/id -gn` +else + CURRENT_USER=`id -un` + CURRENT_GROUP=`id -gn` +fi + +export CURRENT_USER CURRENT_GROUP + +# Fail - used to quickly exit with a rc and error message +fail() { + rc=$1 + shift; + echo "ERROR: $@" + exit $rc +} diff --git a/src/main/swm/common/deinstall.env b/src/main/swm/common/deinstall.env new file mode 100644 index 0000000..43a8d00 --- /dev/null +++ b/src/main/swm/common/deinstall.env @@ -0,0 +1 @@ +. `dirname $0`/common.env diff --git a/src/main/swm/common/deinstall_postproc.sh b/src/main/swm/common/deinstall_postproc.sh new file mode 100644 index 0000000..51d1b4c --- /dev/null +++ b/src/main/swm/common/deinstall_postproc.sh @@ -0,0 +1,26 @@ +#!/bin/sh -x +#******************************************************************************* +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +#******************************************************************************* + +. `dirname $0`/deinstall.env + +exit 0 diff --git a/src/main/swm/common/deinstall_preproc.sh b/src/main/swm/common/deinstall_preproc.sh new file mode 100644 index 0000000..51d1b4c --- /dev/null +++ b/src/main/swm/common/deinstall_preproc.sh @@ -0,0 +1,26 @@ +#!/bin/sh -x +#******************************************************************************* +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +#******************************************************************************* + +. `dirname $0`/deinstall.env + +exit 0 diff --git a/src/main/swm/common/install.env b/src/main/swm/common/install.env new file mode 100644 index 0000000..6dbd12c --- /dev/null +++ b/src/main/swm/common/install.env @@ -0,0 +1 @@ +#NOOP
\ No newline at end of file diff --git a/src/main/swm/common/install_postproc.sh b/src/main/swm/common/install_postproc.sh new file mode 100644 index 0000000..4166481 --- /dev/null +++ b/src/main/swm/common/install_postproc.sh @@ -0,0 +1,26 @@ +#!/bin/sh -x +#******************************************************************************* +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +#******************************************************************************* + +. `dirname $0`/install.env + +exit 0 diff --git a/src/main/swm/common/install_preproc.sh b/src/main/swm/common/install_preproc.sh new file mode 100644 index 0000000..4166481 --- /dev/null +++ b/src/main/swm/common/install_preproc.sh @@ -0,0 +1,26 @@ +#!/bin/sh -x +#******************************************************************************* +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +#******************************************************************************* + +. `dirname $0`/install.env + +exit 0 diff --git a/src/main/swm/common/localize.sh b/src/main/swm/common/localize.sh new file mode 100644 index 0000000..c6aa5ed --- /dev/null +++ b/src/main/swm/common/localize.sh @@ -0,0 +1,170 @@ +#!/bin/sh +#******************************************************************************* +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +#******************************************************************************* +FINAL_CONFIG_FILE=${ROOT_DIR}/etc/cambriaApi.properties +TEMPLATE_CONFIG_FILE=${ROOT_DIR}/etc/cambriaApi_template.properties +BACKUP1_CONFIG_FILE=${ROOT_DIR}/etc/cambriaApi.properties.bk.1 +BACKUP2_CONFIG_FILE=${ROOT_DIR}/etc/cambriaApi.properties.bk.2 + +echo "Localizing the Cambria API Server configuration" + +if [ -z "${ELASTICSEARCH_NODES}" ]; then + echo "ERROR: ELASTICSEARCH_NODES must be set"; exit 1 +fi + +if [ -z "${ZOOKEEPER_ENSEMBLE}" ]; then + echo "ERROR: ZOOKEEPER_ENSEMBLE must be set"; exit 2 +fi + +if [ -z "${ZOOKEEPER_CLIENT_PORT}" ]; then + ZOOKEEPER_CLIENT_PORT=2181 +fi + +if [ -z "${CAMBRIA_SERVICE_PORT}" ]; then + CAMBRIA_SERVICE_PORT=3904 +fi + +if [ -z "${CAMBRIA_BROKER_TYPE}" ]; then + CAMBRIA_BROKER_TYPE=kafka +fi + +if [ -z "${KAFKA_PORT}" ]; then + KAFKA_PORT=9092 +fi + +if [ -z "${KAFKA_BROKER_LIST}" ]; then + KAFKA_BROKER_LIST=localhost:${KAFKA_PORT} +fi + +#------------------------------------------------------------------------ +#- MAKE A BACKUP OF PREVIOUS BACKUP FILE, IF EXISTS +#------------------------------------------------------------------------ +if [ -f ${BACKUP1_CONFIG_FILE} ]; then + cp -f ${BACKUP1_CONFIG_FILE} ${BACKUP2_CONFIG_FILE} || { + echo "ERROR: Could not copy ${BACKUP1_CONFIG_FILE} to ${BACKUP2_CONFIG_FILE}" + exit 5 + } +fi + +#------------------------------------------------------------------------ +#- MAKE A BACKUP OF CURRENT FILE, IF EXISTS +#------------------------------------------------------------------------ +if [ -f ${FINAL_CONFIG_FILE} ]; then + cp -f ${FINAL_CONFIG_FILE} ${BACKUP1_CONFIG_FILE} || { + echo "ERROR: Could not copy ${FINAL_CONFIG_FILE} to ${BACKUP1_CONFIG_FILE}" + exit 6 + } +fi + +CAMBRIA_ZOOKEEPER_NODES=`echo ${ZOOKEEPER_ENSEMBLE} | sed -e "s/ /:${ZOOKEEPER_CLIENT_PORT},/g" | sed -e "s/$/:${ZOOKEEPER_CLIENT_PORT}/g"` + +#------------------------------------------------------------------------ +#- PROCESS THE TEMPLATE +#------------------------------------------------------------------------ +sed -e 's/${CAMBRIA_SERVICE_PORT}/'${CAMBRIA_SERVICE_PORT}'/g' \ + -e 's/${CAMBRIA_BROKER_TYPE}/'${CAMBRIA_BROKER_TYPE}'/g' \ + -e 's/${KAFKA_BROKER_LIST}/'${KAFKA_BROKER_LIST}'/g' \ + -e 's/${CAMBRIA_ZOOKEEPER_NODES}/'${CAMBRIA_ZOOKEEPER_NODES}'/g' ${TEMPLATE_CONFIG_FILE} > ${FINAL_CONFIG_FILE} || { + echo "ERROR: Could not process template file ${TEMPLATE_CONFIG_FILE} into ${FINAL_CONFIG_FILE}" + exit 7 + } + +FINAL_LOG4J_FILE=${ROOT_DIR}/etc/log4j.xml +TEMPLATE_LOG4J_FILE=${ROOT_DIR}/etc/log4j_template.xml +BACKUP1_LOG4J_FILE=${ROOT_DIR}/etc/log4j.xml.bk.1 +BACKUP2_LOG4J_FILE=${ROOT_DIR}/etc/log4j.xml.bk.2 + +if [ -z "${CAMBRIA_LOG_DIR}" ]; then + CAMBRIA_LOG_DIR=${ROOT_DIR}/logs +fi + +if [ -z "${CAMBRIA_LOG_THRESHOLD}" ]; then + CAMBRIA_LOG_THRESHOLD="INFO" +fi + +#------------------------------------------------------------------------ +#- MAKE A BACKUP OF PREVIOUS BACKUP FILE, IF EXISTS +#------------------------------------------------------------------------ +if [ -f ${BACKUP1_LOG4J_FILE} ]; then + cp -f ${BACKUP1_LOG4J_FILE} ${BACKUP2_LOG4J_FILE} || { + echo "ERROR: Could not copy ${BACKUP1_LOG4J_FILE} to ${BACKUP2_LOG4J_FILE}" + exit 8 + } +fi + +#------------------------------------------------------------------------ +#- MAKE A BACKUP OF CURRENT FILE, IF EXISTS +#------------------------------------------------------------------------ +if [ -f ${FINAL_LOG4J_FILE} ]; then + cp -f ${FINAL_LOG4J_FILE} ${BACKUP1_LOG4J_FILE} || { + echo "ERROR: Could not copy ${FINAL_LOG4J_FILE} to ${BACKUP1_LOG4J_FILE}" + exit 9 + } +fi + +#------------------------------------------------------------------------ +#- PROCESS THE TEMPLATE +#------------------------------------------------------------------------ +sed -e 's/${CAMBRIA_LOG_THRESHOLD}/'${CAMBRIA_LOG_THRESHOLD}'/g' \ + -e 's,${CAMBRIA_LOG_DIR},'${CAMBRIA_LOG_DIR}',g' ${TEMPLATE_LOG4J_FILE} > ${FINAL_LOG4J_FILE} || { + echo "ERROR: Could not process template file ${TEMPLATE_LOG4J_FILE} into ${FINAL_LOG4J_FILE}" + exit 10 + } + +FINAL_LOGSTASH_FILE=${ROOT_DIR}/etc/messages.conf +TEMPLATE_LOGSTASH_FILE=${ROOT_DIR}/etc/logstash_cambria_template.conf +BACKUP1_LOGSTASH_FILE=${ROOT_DIR}/etc/messages.conf.bk.1 +BACKUP2_LOGSTASH_FILE=${ROOT_DIR}/etc/messages.conf.bk.2 +#------------------------------------------------------------------------ +#- MAKE A BACKUP OF PREVIOUS BACKUP FILE, IF EXISTS +#------------------------------------------------------------------------ +if [ -f ${BACKUP1_LOGSTASH_FILE} ]; then + cp -f ${BACKUP1_LOGSTASH_FILE} ${BACKUP2_LOGSTASH_FILE} || { + echo "ERROR: Could not copy ${BACKUP1_LOGSTASH_FILE} to ${BACKUP2_LOGSTASH_FILE}" + exit 11 + } +fi + +#------------------------------------------------------------------------ +#- MAKE A BACKUP OF CURRENT FILE, IF EXISTS +#------------------------------------------------------------------------ +if [ -f ${FINAL_LOGSTASH_FILE} ]; then + cp -f ${FINAL_LOGSTASH_FILE} ${BACKUP1_LOGSTASH_FILE} || { + echo "ERROR: Could not copy ${FINAL_LOGSTASH_FILE} to ${BACKUP1_LOGSTASH_FILE}" + exit 12 + } +fi + +#------------------------------------------------------------------------ +#- PROCESS THE TEMPLATE +#------------------------------------------------------------------------ +sed -e 's,${CAMBRIA_SERVER_LOG},'${CAMBRIA_LOG_DIR}/cambria.log',g' \ + -e 's/${ELASTICSEARCH_NODES}/'${ELASTICSEARCH_NODES}'/g' ${TEMPLATE_LOGSTASH_FILE} > ${FINAL_LOGSTASH_FILE} || { + echo "ERROR: Could not process template file ${TEMPLATE_LOGSTASH_FILE} into ${FINAL_LOGSTASH_FILE}" + exit 13 + } + +#------------------------------------------------------------------------ +#- CLEAN EXIT +#------------------------------------------------------------------------ +echo "Localized Successfully." +exit 0 |