diff options
Diffstat (limited to 'pom.xml')
| -rw-r--r-- | pom.xml | 442 |
1 files changed, 205 insertions, 237 deletions
@@ -1,24 +1,14 @@ -<!-- - ============LICENSE_START======================================================= - org.onap.dmaap - ================================================================================ - Copyright © 2017 AT&T Intellectual Property. All rights reserved. - ================================================================================ - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - ============LICENSE_END========================================================= - - ECOMP is a trademark and service mark of AT&T Intellectual Property. - - --> +<!-- ============LICENSE_START======================================================= + org.onap.dmaap ================================================================================ + Copyright © 2017 AT&T Intellectual Property. All rights reserved. ================================================================================ + Licensed under the Apache License, Version 2.0 (the "License"); you may not + use this file except in compliance with the License. You may obtain a copy + of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required + by applicable law or agreed to in writing, software distributed under the + License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS + OF ANY KIND, either express or implied. See the License for the specific + language governing permissions and limitations under the License. ============LICENSE_END========================================================= + ECOMP is a trademark and service mark of AT&T Intellectual Property. --> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> @@ -28,13 +18,13 @@ <packaging>jar</packaging> <name>dmaap-messagerouter-msgrtr</name> <description>Message Router - Restful interface built for kafka</description> - + <parent> <groupId>org.onap.oparent</groupId> <artifactId>oparent</artifactId> <version>0.1.1</version> </parent> - + <properties> <spring.version>3.2.15.RELEASE</spring.version> <cxf.version>3.0.4</cxf.version> @@ -42,17 +32,18 @@ <maven.compiler.target>1.7</maven.compiler.target> <maven.compiler.source>1.7</maven.compiler.source> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> - - <!-- SONAR --> - <jacoco.version>0.7.7.201606060606</jacoco.version> - <sonar-jacoco-listeners.version>3.2</sonar-jacoco-listeners.version> - <sonar.core.codeCoveragePlugin>jacoco</sonar.core.codeCoveragePlugin> - <!-- Default Sonar configuration --> - <sonar.jacoco.reportPath>target/code-coverage/jacoco-ut.exec</sonar.jacoco.reportPath> - <sonar.jacoco.itReportPath>target/code-coverage/jacoco-it.exec</sonar.jacoco.itReportPath> - <!-- Note: This list should match jacoco-maven-plugin's exclusion list below --> - <sonar.exclusions>**/gen/**,**/generated-sources/**,**/yang-gen**,**/pax/**</sonar.exclusions> - <sitePath>/content/sites/site/org/onap/dmaap/messagerouter/msgrtr/${project.artifactId}/${project.version}</sitePath> + + <!-- SONAR --> + <jacoco.version>0.7.7.201606060606</jacoco.version> + <sonar-jacoco-listeners.version>3.2</sonar-jacoco-listeners.version> + <sonar.core.codeCoveragePlugin>jacoco</sonar.core.codeCoveragePlugin> + <!-- Default Sonar configuration --> + <sonar.jacoco.reportPath>target/code-coverage/jacoco-ut.exec</sonar.jacoco.reportPath> + <sonar.jacoco.itReportPath>target/code-coverage/jacoco-it.exec</sonar.jacoco.itReportPath> + <!-- Note: This list should match jacoco-maven-plugin's exclusion list + below --> + <sonar.exclusions>**/gen/**,**/generated-sources/**,**/yang-gen**,**/pax/**</sonar.exclusions> + <sitePath>/content/sites/site/org/onap/dmaap/messagerouter/msgrtr/${project.artifactId}/${project.version}</sitePath> <nexusproxy>https://nexus.onap.org</nexusproxy> </properties> @@ -68,84 +59,124 @@ <!-- End Distribution management --> - <licenses> - <license> - <name>Apache License Version 2.0</name> - </license> + <licenses> + <license> + <name>Apache License Version 2.0</name> + </license> </licenses> <developers> - <developer> - <name>Rajashree</name> - <email></email> - <organization>ATT</organization> - <organizationUrl>www.att.com</organizationUrl> - </developer> - <developer> - <name>Ramkumar</name> - <email></email> - <organization>ATT</organization> - <organizationUrl>www.att.com</organizationUrl> - </developer> - </developers> + <developer> + <name>Rajashree</name> + <email></email> + <organization>ATT</organization> + <organizationUrl>www.att.com</organizationUrl> + </developer> + <developer> + <name>Ramkumar</name> + <email></email> + <organization>ATT</organization> + <organizationUrl>www.att.com</organizationUrl> + </developer> + </developers> <dependencies> - <dependency> - <groupId>commons-collections</groupId> - <artifactId>commons-collections</artifactId> - <version>3.2.2</version> - </dependency> - <dependency> - <groupId>ch.qos.logback</groupId> - <artifactId>logback-core</artifactId> - <version>1.2.0</version> - </dependency> - <dependency> - <groupId>ch.qos.logback</groupId> - <artifactId>logback-classic</artifactId> - <version>1.2.0</version> - </dependency> - <!-- <dependency> - <groupId>commons-beanutils</groupId> - <artifactId>commons-beanutils</artifactId> - <version>1.9.2</version> - <exclusions> - We have JCL-over-SLF4J instead. - <exclusion> - <groupId>commons-logging</groupId> - <artifactId>commons-logging</artifactId> - </exclusion> - </exclusions> - </dependency> --> - <dependency> - <groupId>org.grails</groupId> - <artifactId>grails-web</artifactId> - <version>2.4.4</version> - </dependency> - <dependency> + <dependency> + <groupId>commons-collections</groupId> + <artifactId>commons-collections</artifactId> + <version>3.2.2</version> + </dependency> + <dependency> + <groupId>ch.qos.logback</groupId> + <artifactId>logback-core</artifactId> + <version>1.2.0</version> + </dependency> + <dependency> + <groupId>ch.qos.logback</groupId> + <artifactId>logback-classic</artifactId> + <version>1.2.0</version> + </dependency> + <!-- <dependency> <groupId>commons-beanutils</groupId> <artifactId>commons-beanutils</artifactId> + <version>1.9.2</version> <exclusions> We have JCL-over-SLF4J instead. <exclusion> + <groupId>commons-logging</groupId> <artifactId>commons-logging</artifactId> + </exclusion> </exclusions> </dependency> --> + <dependency> + <groupId>org.grails</groupId> + <artifactId>grails-web</artifactId> + <version>2.4.4</version> + </dependency> + <dependency> + <groupId>org.grails</groupId> + <artifactId>grails-bootstrap</artifactId> + <version>2.5.3</version> + <scope>compile</scope> + <exclusions> + <exclusion> + <artifactId>ant</artifactId> + <groupId>org.apache.ant</groupId> + </exclusion> + <exclusion> + <artifactId>jna</artifactId> + <groupId>net.java.dev.jna</groupId> + </exclusion> + <exclusion> + <artifactId>ant-trax</artifactId> + <groupId>org.apache.ant</groupId> + </exclusion> + <exclusion> + <artifactId>gant_groovy1.8</artifactId> + <groupId>org.codehaus.gant</groupId> + </exclusion> + <exclusion> + <artifactId>ant-launcher</artifactId> + <groupId>org.apache.ant</groupId> + </exclusion> + <exclusion> + <artifactId>jline</artifactId> + <groupId>jline</groupId> + </exclusion> + <exclusion> + <artifactId>ivy</artifactId> + <groupId>org.apache.ivy</groupId> + </exclusion> + <exclusion> + <artifactId>jansi</artifactId> + <groupId>org.fusesource.jansi</groupId> + </exclusion> + <exclusion> + <artifactId>commons-logging</artifactId> + <groupId>commons-logging</groupId> + </exclusion> + <exclusion> + <artifactId>ant-junit</artifactId> + <groupId>org.apache.ant</groupId> + </exclusion> + </exclusions> + </dependency> + <dependency> <groupId>org.springframework</groupId> <artifactId>spring-test</artifactId> <version>${spring.version}</version> <scope>test</scope> </dependency> - <dependency> - <groupId>org.codehaus.groovy</groupId> - <artifactId>groovy-all</artifactId> - <version>2.4.4</version> - <scope>compile</scope> - <exclusions> - <exclusion> - <artifactId>jline</artifactId> - <groupId>jline</groupId> - </exclusion> - </exclusions> - </dependency> - <dependency> - <groupId>commons-fileupload</groupId> - <artifactId>commons-fileupload</artifactId> - <version>1.3.3</version> - </dependency> - + <dependency> + <groupId>org.codehaus.groovy</groupId> + <artifactId>groovy-all</artifactId> + <version>2.4.4</version> + <scope>compile</scope> + <exclusions> + <exclusion> + <artifactId>jline</artifactId> + <groupId>jline</groupId> + </exclusion> + </exclusions> + </dependency> + <dependency> + <groupId>commons-fileupload</groupId> + <artifactId>commons-fileupload</artifactId> + <version>1.3.3</version> + </dependency> + <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> @@ -156,7 +187,7 @@ <groupId>com.att.aft</groupId> <artifactId>dme2</artifactId> <version>3.1.200-oss</version> - </dependency> + </dependency> <!-- slf4j logger --> <dependency> @@ -270,11 +301,8 @@ </dependency> <!-- our Highland Park library --> - <!-- <dependency> - <groupId>com.att.nsa</groupId> - <artifactId>highlandParkCore</artifactId> - <version>0.4.9</version> - </dependency> --> + <!-- <dependency> <groupId>com.att.nsa</groupId> <artifactId>highlandParkCore</artifactId> + <version>0.4.9</version> </dependency> --> <!-- our base client library, for its command line tools --> <dependency> @@ -293,22 +321,22 @@ </exclusions> </dependency> <dependency> - <groupId>org.apache.httpcomponents</groupId> - <artifactId>httpclient</artifactId> - <version>4.5.3</version> -</dependency> - <dependency> - <groupId>org.apache.httpcomponents</groupId> - <artifactId>httpclient-cache</artifactId> - <version>4.5.3</version> - </dependency> - <dependency> - <groupId>org.apache.httpcomponents</groupId> - <artifactId>httpcore</artifactId> - <version>4.4.1</version> - </dependency> - - + <groupId>org.apache.httpcomponents</groupId> + <artifactId>httpclient</artifactId> + <version>4.5.3</version> + </dependency> + <dependency> + <groupId>org.apache.httpcomponents</groupId> + <artifactId>httpclient-cache</artifactId> + <version>4.5.3</version> + </dependency> + <dependency> + <groupId>org.apache.httpcomponents</groupId> + <artifactId>httpcore</artifactId> + <version>4.4.1</version> + </dependency> + + <!-- explicit jline add b/c it conflicts with the zk client --> <dependency> <groupId>jline</groupId> @@ -329,11 +357,11 @@ </dependency> - <dependency> - <groupId>com.google.code.gson</groupId> - <artifactId>gson</artifactId> - <version>2.8.0</version> - </dependency> + <dependency> + <groupId>com.google.code.gson</groupId> + <artifactId>gson</artifactId> + <version>2.8.0</version> + </dependency> <dependency> <groupId>com.fasterxml.jackson.core</groupId> @@ -341,7 +369,7 @@ <version>2.8.11</version> <scope>test</scope> </dependency> - + <dependency> <groupId>com.fasterxml.jackson.core</groupId> <artifactId>jackson-databind</artifactId> @@ -361,12 +389,12 @@ <version>1.6.4</version> <scope>test</scope> </dependency> - + <dependency> - <groupId>org.powermock</groupId> - <artifactId>powermock-module-junit4-rule</artifactId> - <version>1.6.4</version> - <scope>test</scope> + <groupId>org.powermock</groupId> + <artifactId>powermock-module-junit4-rule</artifactId> + <version>1.6.4</version> + <scope>test</scope> </dependency> <dependency> <groupId>org.mockito</groupId> @@ -374,7 +402,7 @@ <version>1.10.19</version> <scope>test</scope> </dependency> - + </dependencies> <build> <finalName>DMaaP</finalName> @@ -439,117 +467,57 @@ </goals> </execution> </executions> - </plugin> + </plugin> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.12.4</version> <configuration> <excludes> - <!-- exclude until junits updated - <exclude>**/DME2*.java</exclude> --> + <!-- exclude until junits updated <exclude>**/DME2*.java</exclude> --> </excludes> <!-- <skipTests>true</skipTests> --> </configuration> </plugin> - <plugin> - <groupId>org.codehaus.mojo</groupId> - <artifactId>cobertura-maven-plugin</artifactId> - <version>2.7</version> - <configuration> - <formats> - <format>html</format> - <format>xml</format> - </formats> - </configuration> - </plugin> - <!-- <plugin> - <groupId>org.jacoco</groupId> - <artifactId>jacoco-maven-plugin</artifactId> - <version>${jacoco.version}</version> - <configuration> - Note: This exclusion list should match <sonar.exclusions> - property above - <excludes> - <exclude>**/gen/**</exclude> - <exclude>**/generated-sources/**</exclude> - <exclude>**/yang-gen/**</exclude> - <exclude>**/pax/**</exclude> - </excludes> - </configuration> - <executions> - - Prepares the property pointing to the JaCoCo runtime agent which - is passed as VM argument when Maven the Surefire plugin is executed. - - <execution> - <id>pre-unit-test</id> - <goals> - <goal>prepare-agent</goal> - </goals> - <configuration> - Sets the path to the file which contains the execution data. - <destFile>${project.build.directory}/code-coverage/jacoco-ut.exec</destFile> - - Sets the name of the property containing the settings - for JaCoCo runtime agent. - - <propertyName>surefireArgLine</propertyName> - </configuration> - </execution> - - Ensures that the code coverage report for unit tests is created after - unit tests have been run. - - <execution> - <id>post-unit-test</id> - <phase>test</phase> - <goals> - <goal>report</goal> - </goals> - <configuration> - Sets the path to the file which contains the execution data. - <dataFile>${project.build.directory}/code-coverage/jacoco-ut.exec</dataFile> - Sets the output directory for the code coverage report. - <outputDirectory>${project.reporting.outputDirectory}/jacoco-ut</outputDirectory> - </configuration> - </execution> - <execution> - <id>pre-integration-test</id> - <phase>pre-integration-test</phase> - <goals> - <goal>prepare-agent</goal> - </goals> - <configuration> - Sets the path to the file which contains the execution data. - <destFile>${project.build.directory}/code-coverage/jacoco-it.exec</destFile> - - Sets the name of the property containing the settings - for JaCoCo runtime agent. - - <propertyName>failsafeArgLine</propertyName> - </configuration> - </execution> - - Ensures that the code coverage report for integration tests after - integration tests have been run. - - <execution> - <id>post-integration-test</id> - <phase>post-integration-test</phase> - <goals> - <goal>report</goal> - </goals> - <configuration> - Sets the path to the file which contains the execution data. - <dataFile>${project.build.directory}/code-coverage/jacoco-it.exec</dataFile> - Sets the output directory for the code coverage report. - <outputDirectory>${project.reporting.outputDirectory}/jacoco-it</outputDirectory> - </configuration> - </execution> - </executions> - </plugin> - --></plugins> + <plugin> + <groupId>org.codehaus.mojo</groupId> + <artifactId>cobertura-maven-plugin</artifactId> + <version>2.7</version> + <configuration> + <formats> + <format>html</format> + <format>xml</format> + </formats> + </configuration> + </plugin> + <!-- <plugin> <groupId>org.jacoco</groupId> <artifactId>jacoco-maven-plugin</artifactId> + <version>${jacoco.version}</version> <configuration> Note: This exclusion + list should match <sonar.exclusions> property above <excludes> <exclude>**/gen/**</exclude> + <exclude>**/generated-sources/**</exclude> <exclude>**/yang-gen/**</exclude> + <exclude>**/pax/**</exclude> </excludes> </configuration> <executions> Prepares + the property pointing to the JaCoCo runtime agent which is passed as VM argument + when Maven the Surefire plugin is executed. <execution> <id>pre-unit-test</id> + <goals> <goal>prepare-agent</goal> </goals> <configuration> Sets the path + to the file which contains the execution data. <destFile>${project.build.directory}/code-coverage/jacoco-ut.exec</destFile> + Sets the name of the property containing the settings for JaCoCo runtime + agent. <propertyName>surefireArgLine</propertyName> </configuration> </execution> + Ensures that the code coverage report for unit tests is created after unit + tests have been run. <execution> <id>post-unit-test</id> <phase>test</phase> + <goals> <goal>report</goal> </goals> <configuration> Sets the path to the + file which contains the execution data. <dataFile>${project.build.directory}/code-coverage/jacoco-ut.exec</dataFile> + Sets the output directory for the code coverage report. <outputDirectory>${project.reporting.outputDirectory}/jacoco-ut</outputDirectory> + </configuration> </execution> <execution> <id>pre-integration-test</id> <phase>pre-integration-test</phase> + <goals> <goal>prepare-agent</goal> </goals> <configuration> Sets the path + to the file which contains the execution data. <destFile>${project.build.directory}/code-coverage/jacoco-it.exec</destFile> + Sets the name of the property containing the settings for JaCoCo runtime + agent. <propertyName>failsafeArgLine</propertyName> </configuration> </execution> + Ensures that the code coverage report for integration tests after integration + tests have been run. <execution> <id>post-integration-test</id> <phase>post-integration-test</phase> + <goals> <goal>report</goal> </goals> <configuration> Sets the path to the + file which contains the execution data. <dataFile>${project.build.directory}/code-coverage/jacoco-it.exec</dataFile> + Sets the output directory for the code coverage report. <outputDirectory>${project.reporting.outputDirectory}/jacoco-it</outputDirectory> + </configuration> </execution> </executions> </plugin> --> + </plugins> </build> <!-- <profiles> <profile> <id>jenkins</id> <activation> <property> <name>env.BUILD_NUMBER</name> |