Age | Commit message (Collapse) | Author | Files | Lines |
|
Issue-ID: INT-522
Change-Id: I7d29fee829312559554dd8c95b39dce1aabe0f3b
Signed-off-by: Brian Freeman <bf1936@att.com>
|
|
Change-Id: Id7b439cbcb744a92d006e4922452c156a64be3d9
Issue-ID: INT-501
Signed-off-by: Gary Wu <gary.i.wu@huawei.com>
|
|
Moved DHCP server installation to the build phase of the
deployment to eliminate the problem of it going
down sometimes.
Change-Id: I7a5db7aacb57600fe14b1cae9d10caab1593b24e
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
Fixed bug in plugin due to change in
vpp stable branch
Issue-ID: INT-63
Change-Id: I53490a93cfbe30d7550a0852490b2986bf9eb8bc
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
|
|
Adds logic to reset the VES packet loss rate to 0%
when the vg-mux is rebooted.
As part of this change, the VES agent configuration
will only be restored via the honeycomb persistence
mechanism. So, if the VES agent is configured via
the vppctl CLI, that setting will not be saved during
shutdown. In other words, setting of the VES agent
and VES mode should be done via the honeycomb REST
API in order for the configuration to be persisted
across reboot (with the pkt loss rate being reset to
0 %).
Change-Id: I8d1f43316d9608f8d7e7ce919f129ce8fe48aa7f
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Bump minor version in preparation for Amsterdam
branching.
Change-Id: I64bcd76179736b8df252e6e9878227b506854aba
Issue-ID: CIMAN-120
Signed-off-by: Jessica Wagantall <jwagantall@linuxfoundation.org>
|
|
|
|
Modified script to close files after use
Modified script to call fgets only if file
is not null
Issue-ID: INT-63
Change-Id: I61519f9c248dde8ae44f148cb4c1cc594615ea7c
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Moved tap and lstack configuration from setup.gate file to vGW
init script
Created vGW service to start after honeycomb service and modified
DHCP service to start after vGW service
Change-Id: Ib6936f6a1108ccdc34b3257a7bb82b49661f1e3b
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
Fixes an issue where vpp would crash if the
VES server port number was set via honeycomb
rest call. The port value was being handled as
a byte so larger values (e.g. 8080) caused the
problem.
Change-Id: Ib42725033f92d597524bbfda1f12cc7e43c87b4a
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Added vxlan tunnel creation to vGW install script
Change-Id: Ie43bbdc66a3ff607f8dd6c203910d45c6052c954
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
|
|
|
|
Moved creation of nat_service.sh to an if block
Issue-ID: INT-63
Change-Id: I44a86012dd08359859c24c41a7c6693b9b3429a2
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Modified vbrg install script to include a service
to reconfigure vpp honeycomb NAT after vpp crash
Modified vbrg init script to start nat service
Change-Id: I417caa5759d83b429ca4b44f42737c0f9061a3d8
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
|
|
This patch provides the option to override
the value sourceName field in the VES event generated by
the vG-MUX VES agent. The value can be configured
by vppctl CLI command or via honeycomb REST call.
Change-Id: I1a8b0450b989391b39780476842a576b82564dff
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Removed vG-vGMUX vxlan tunnel creation from vGW install
script to create the tunnel via Directed Graph.
Change-Id: I3d4aa143d299d54bcf638a946fcee70dad24ac15
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
Issue-ID: INT-81
Change-Id: If6e695f0a6783f00be2ee98461897fd5a60b797a
Signed-off-by: Brian Freeman <bf1936@att.com>
|
|
|
|
Add parameters to the heat template to allow
configuration of the route the vBRG from the vGMUX
via the vBNG.
Change-Id: I7aef31af7470ceb264af06326af8724246c7d8ed
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Included mux_ip_addr and vg_vgmux_tunnel_vni
parameters in the env file
Included definitions for mux_ip_addr and
vg_vgmux_tunnel_vni in the yaml file
Change-Id: Ibbfca035e44f00094e5231bb3d21610e9b1c239c
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
A route wasn't being added by the init script because vpp was not yet
ready. This change will cause the init script to wait until the tap0
device has been created.
Change-Id: Ief11ce332e0ddfdf40b1fe8b9e067edf38568db0
Issue-ID: INT-63
Signed-off-by: Matt Welch <matt.welch@intel.com>
|
|
|
|
|
|
Added variables for vpp tap names
Modified vpp setup.gate file
Change-Id: Iddf339248d6de83e16a24587f6d5625dbe124990
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Enable ipv4 forwarding on vbng and add config to enable communication
with the sdnc VNF.
Updated 'dummy' addresses from 30.0.0.0/24 to 192.168.40.0/24 subnet
to prevent collision with public IP subnet.
Change-Id: I89d3b8d972822caaedeab2aa00dd4a0c9f19654d
Issue-ID: INT-63
Signed-off-by: Matt Welch <matt.welch@intel.com>
|
|
|
|
Modified script to include sdnc routing and
arp configurations
Change-Id: I510a8abd11dc6df0d5cedc657d6229a1fd243f59
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Issue-ID: UCA-40
Change-Id: I2a7d48854f674d0eeadcf952afcf1d780b455e7d
Signed-off-by: Brian Freeman <bf1936@att.com>
|
|
Modified script to correctly configure snat
rules
Change-Id: Ie88f747f05745070cfdab2f35eb78f2f01177436
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
|
|
Issue-ID: UCA-39
Change-Id: Ib66b6cc353f68b820716ed7548b2c86a30420025
Signed-off-by: bdfreeman1421 <bf1936@att.com>
Signed-off-by: Pilot <bf1936@att.com>
|
|
Update vBNG environment and heat templates.
Update v_bng installer for ONAP cloud environment, add 'build state'
control to phases of the installer.
Automatically detect ethernet pci devs for vpp.
Remove binary blobs from Vpp-Integrate-FreeRADIUS-Client-for-vBNG.patch
(cause of the HUGE line count in this patch)
Modify Vpp patch to include dhcp.api.h file which fixes build errors.
Change-Id: If9e61185f2dde9095efda08aa8f72c2c03c475e7
Issue-ID: INT-63
Signed-off-by: Matt Welch <matt.welch@intel.com>
|
|
|
|
Fixed bugs in vCPE vbrg emulator install script
Modified Script to include different build modes
Fixed here documents bind_nic.sh and set_nat.sh
Commented out the 192.168.1.0/24 network
configurations in the yaml and env files
Change-Id: I2f6dee1843e6e289fe199844ed80d010257bce63
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Configured vGW .env file
Configured vGW .yaml file to not run the install script
Modified vGW install script and included different build modes
Change-Id: I178cc1909ffa13fc5164e142de1de78b1366c624
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
Move configuration of disabling auto upgrade to the
'build' phase of the install script.
Also, disable the setting in the /etc/apt/apt.conf.d/20auto-upgrades
file.
Auto upgrade of the kernel without associated packages can
cause vpp to stop working. This should help keep the demo
instances running without occasional failures.
Change-Id: Ief46bc7866a94d67fe2c3d2fe2d1f22bb4433aa9
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Instead of hard coding VPP interface names, derive them from
the PCI addresses of the network devices when setting up the
default vpp configuration in /etc/vpp/setup.gate.
Also, remove the vxlan tunnel configuration from the default
vpp configuration - this will be created by SDNC.
Change-Id: Ife48ac19b8d3869c7d65e83bdf8ab9a5a2c3301c
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
This change improves the vG-MUX install script by:
- setting bng-mux network IP and mux-gw IP from environment
variables instead of hardcoded values
- provides ability to use script to prepare a snapshot image
with the vpp and honeycomb binaries pre-compiles to improve
vnf deployment time (was taking about 40 minutes).
Change-Id: Ib5423af6d88f4501ac3ecfd4a4cbc9b315460194
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Issue-Id: CERT-4
Change-Id: I4b92e39ea6bedb5c5a70eae93ee8e7c4be9f9866
Signed-Off-by: Gokul Singaraju <goksing@gmail.com>
|
|
Correct a couple typos made in the vgmux install script.
Change-Id: Ib6eff3a875c3588bb1aad42a4105827d883b9c8d
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Addresses the following items:
- Do not setup auto configuration for eth1 and eth3
These interfaces will be used by vpp so they need to be down
- Fix pci bus numbering for vpp interfaces
- Fixes to properly create the 'save_config' script
- Install linux-image-extra package to get uio_pci_generic
driver module for the vpp dpdk interfaces
- fix build of honeycomb so the jvpp-ves module built by vpp
can be found
- Patch libevel.so code to tweak the VES data produced
so that sourceId and sourceName come from the openstack
vnf_id property (instead of vm_uuid and vm_name)
Issue-ID: INT-63
Change-Id: I469c2377df9dd9920a5769628b2b14d043d55d63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Remove percentage symbol from output reported for
Packet Loss Rate in the VES ouput.
Change-Id: I9f827a5152521d3dac2f2ac6c2fb01d107d393ae
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Fixup URLs for the patch files to be applied to
VPP and honeycomb components.
Fix what looked like a typo in vgmux key attribute.
Create maven ~/.m2 directory before saving file to it.
Change-Id: Iccd10dac44b51a3ad4721422619c8823d8fa65bb
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
|
|
Issue-ID: INT-80
Change-Id: Idd407cadae26f354b85a356ce5aaf6e090e03fc1
Signed-off-by: root <rujun.li@intel.com>
Signed-off-by: RujunLi <rujun.li@intel.com>
|
|
Issue-ID: INT-80
Change-Id: I6ae3cabf62c85a8da85c8a4623db4aae0e5e4281
Signed-off-by: Johnson Li <johnson.li@intel.com>
|
|
Add Framework codes for the vCPE VNFs
Issue-ID: INT-80
Change-Id: I312aef9631636f0e2273f482f5db44ca93a55983
Signed-off-by: Johnson Li <johnson.li@intel.com>
Signed-off-by: root <rujun.li@intel.com>
|