Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Add parameters to the heat template to allow
configuration of the route the vBRG from the vGMUX
via the vBNG.
Change-Id: I7aef31af7470ceb264af06326af8724246c7d8ed
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Included mux_ip_addr and vg_vgmux_tunnel_vni
parameters in the env file
Included definitions for mux_ip_addr and
vg_vgmux_tunnel_vni in the yaml file
Change-Id: Ibbfca035e44f00094e5231bb3d21610e9b1c239c
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
A route wasn't being added by the init script because vpp was not yet
ready. This change will cause the init script to wait until the tap0
device has been created.
Change-Id: Ief11ce332e0ddfdf40b1fe8b9e067edf38568db0
Issue-ID: INT-63
Signed-off-by: Matt Welch <matt.welch@intel.com>
|
|
|
|
|
|
Added variables for vpp tap names
Modified vpp setup.gate file
Change-Id: Iddf339248d6de83e16a24587f6d5625dbe124990
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Enable ipv4 forwarding on vbng and add config to enable communication
with the sdnc VNF.
Updated 'dummy' addresses from 30.0.0.0/24 to 192.168.40.0/24 subnet
to prevent collision with public IP subnet.
Change-Id: I89d3b8d972822caaedeab2aa00dd4a0c9f19654d
Issue-ID: INT-63
Signed-off-by: Matt Welch <matt.welch@intel.com>
|
|
|
|
Modified script to include sdnc routing and
arp configurations
Change-Id: I510a8abd11dc6df0d5cedc657d6229a1fd243f59
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Issue-ID: UCA-40
Change-Id: I2a7d48854f674d0eeadcf952afcf1d780b455e7d
Signed-off-by: Brian Freeman <bf1936@att.com>
|
|
Modified script to correctly configure snat
rules
Change-Id: Ie88f747f05745070cfdab2f35eb78f2f01177436
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
|
|
Issue-ID: UCA-39
Change-Id: Ib66b6cc353f68b820716ed7548b2c86a30420025
Signed-off-by: bdfreeman1421 <bf1936@att.com>
Signed-off-by: Pilot <bf1936@att.com>
|
|
Update vBNG environment and heat templates.
Update v_bng installer for ONAP cloud environment, add 'build state'
control to phases of the installer.
Automatically detect ethernet pci devs for vpp.
Remove binary blobs from Vpp-Integrate-FreeRADIUS-Client-for-vBNG.patch
(cause of the HUGE line count in this patch)
Modify Vpp patch to include dhcp.api.h file which fixes build errors.
Change-Id: If9e61185f2dde9095efda08aa8f72c2c03c475e7
Issue-ID: INT-63
Signed-off-by: Matt Welch <matt.welch@intel.com>
|
|
|
|
Fixed bugs in vCPE vbrg emulator install script
Modified Script to include different build modes
Fixed here documents bind_nic.sh and set_nat.sh
Commented out the 192.168.1.0/24 network
configurations in the yaml and env files
Change-Id: I2f6dee1843e6e289fe199844ed80d010257bce63
Issue-ID: INT-63
Signed-off-by: Itohan <itohan.ukponmwan@intel.com>
|
|
Configured vGW .env file
Configured vGW .yaml file to not run the install script
Modified vGW install script and included different build modes
Change-Id: I178cc1909ffa13fc5164e142de1de78b1366c624
Issue-ID: INT-63
Signed-off-by: Srivahni <srivahni.chivukula@intel.com>
|
|
Move configuration of disabling auto upgrade to the
'build' phase of the install script.
Also, disable the setting in the /etc/apt/apt.conf.d/20auto-upgrades
file.
Auto upgrade of the kernel without associated packages can
cause vpp to stop working. This should help keep the demo
instances running without occasional failures.
Change-Id: Ief46bc7866a94d67fe2c3d2fe2d1f22bb4433aa9
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Instead of hard coding VPP interface names, derive them from
the PCI addresses of the network devices when setting up the
default vpp configuration in /etc/vpp/setup.gate.
Also, remove the vxlan tunnel configuration from the default
vpp configuration - this will be created by SDNC.
Change-Id: Ife48ac19b8d3869c7d65e83bdf8ab9a5a2c3301c
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
This change improves the vG-MUX install script by:
- setting bng-mux network IP and mux-gw IP from environment
variables instead of hardcoded values
- provides ability to use script to prepare a snapshot image
with the vpp and honeycomb binaries pre-compiles to improve
vnf deployment time (was taking about 40 minutes).
Change-Id: Ib5423af6d88f4501ac3ecfd4a4cbc9b315460194
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Correct a couple typos made in the vgmux install script.
Change-Id: Ib6eff3a875c3588bb1aad42a4105827d883b9c8d
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Addresses the following items:
- Do not setup auto configuration for eth1 and eth3
These interfaces will be used by vpp so they need to be down
- Fix pci bus numbering for vpp interfaces
- Fixes to properly create the 'save_config' script
- Install linux-image-extra package to get uio_pci_generic
driver module for the vpp dpdk interfaces
- fix build of honeycomb so the jvpp-ves module built by vpp
can be found
- Patch libevel.so code to tweak the VES data produced
so that sourceId and sourceName come from the openstack
vnf_id property (instead of vm_uuid and vm_name)
Issue-ID: INT-63
Change-Id: I469c2377df9dd9920a5769628b2b14d043d55d63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
Fixup URLs for the patch files to be applied to
VPP and honeycomb components.
Fix what looked like a typo in vgmux key attribute.
Create maven ~/.m2 directory before saving file to it.
Change-Id: Iccd10dac44b51a3ad4721422619c8823d8fa65bb
Issue-ID: INT-63
Signed-off-by: Eric Multanen <eric.w.multanen@intel.com>
|
|
|
|
Issue-ID: INT-80
Change-Id: Idd407cadae26f354b85a356ce5aaf6e090e03fc1
Signed-off-by: root <rujun.li@intel.com>
Signed-off-by: RujunLi <rujun.li@intel.com>
|
|
Issue-ID: INT-80
Change-Id: I6ae3cabf62c85a8da85c8a4623db4aae0e5e4281
Signed-off-by: Johnson Li <johnson.li@intel.com>
|
|
Add Framework codes for the vCPE VNFs
Issue-ID: INT-80
Change-Id: I312aef9631636f0e2273f482f5db44ca93a55983
Signed-off-by: Johnson Li <johnson.li@intel.com>
Signed-off-by: root <rujun.li@intel.com>
|
|
- Install Apache2
- Create a sample index.html web page
Change-Id: Id38d7f3a060a298cc424c35d7f7c4dc00cd8b69b
Issue-ID: UCA-32
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
- ONAP install
- vCPE/vFW/vLB use cases
- Use sources.list.d instead of apt-add-repository
- Parametrize the OS name
Change-Id: I7287fda8c5f3aa4ecd42ff576ebfd3b937bfa549
Issue-ID: INT-129
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
- Add repos to sources.list.d instead of using add-apt-repository
Change-Id: I3f84bce0e189c3c0eed3d3dd2a292761726ec236
Issue-ID: INT-129
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: Id3bccf33de4bb492036e7b1720aa8592b8bfb34c
Issue-ID: INT-84
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
- Bind as vDNS
- FreeRADIUS as vAAA
- KEA-DHCP-SERVER as vDHCP
Change-Id: I9a54add31542c075163bf946f475a184e14600aa
Issue-ID: INT-84
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
- Add MR IP to vCPE-Infra Heat template
- Modify kea-sdnc-notify.conf for Nexus
- Update v_dhcp_install.sh to change the fake MR IP via sed
Change-Id: I90faff7142739ca209ab2ad0efe9fd7a8d8dfe95
Issue-ID: UCA-35
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: I787ea63999ab302c064f4288ea68bd0de5139d37
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: I68c8a27b27892fb3a1433f73c7a4e199f3d27a3b
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: I7098a57356875e0320a9a3bd161f932bd779492c
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: Icd5ffa67d9b34162f183080470e9e309c03d5cd6
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: I36085089fcb524f9b0526717449feefc1c45f73b
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: I5ec26dc5bdfa647c15b2db88829b75ed713caf42
Signed-off-by: Marco Platania <platania@research.att.com>
|
|
Change-Id: I6366496e9cc7ed12d402fc25bee24faeb4f4722a
Signed-off-by: Brian Freeman <bf1936@att.com>
|