diff options
Diffstat (limited to 'boot')
| -rw-r--r-- | boot/aaf_install.sh | 400 | ||||
| -rw-r--r-- | boot/music_vm_init.sh | 7 |
2 files changed, 406 insertions, 1 deletions
diff --git a/boot/aaf_install.sh b/boot/aaf_install.sh index bc7e28e5..0378a4e7 100644 --- a/boot/aaf_install.sh +++ b/boot/aaf_install.sh @@ -98,8 +98,406 @@ chmod +x /opt/authz/auth/auth-cass/docker/dinstall.sh chmod +x /opt/authz/auth/docker/drun.sh chmod +x /opt/authz/auth/docker/d.props +#Update maven settings +cat > /usr/share/maven/conf/settings.xml << EOF +<?xml version="1.0" encoding="UTF-8"?> + +<!-- +Licensed to the Apache Software Foundation (ASF) under one +or more contributor license agreements. See the NOTICE file +distributed with this work for additional information +regarding copyright ownership. The ASF licenses this file +to you under the Apache License, Version 2.0 (the +"License"); you may not use this file except in compliance +with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, +software distributed under the License is distributed on an +"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +KIND, either express or implied. See the License for the +specific language governing permissions and limitations +under the License. +--> + +<!-- + | This is the configuration file for Maven. It can be specified at two levels: + | + | 1. User Level. This settings.xml file provides configuration for a single user, +| and is normally provided in \${user.home}/.m2/settings.xml. + | + | NOTE: This location can be overridden with the CLI option: + | + | -s /path/to/user/settings.xml + | + | 2. Global Level. This settings.xml file provides configuration for all Maven + | users on a machine (assuming they're all using the same Maven + | installation). It's normally provided in +| \${maven.home}/conf/settings.xml. + | + | NOTE: This location can be overridden with the CLI option: + | + | -gs /path/to/global/settings.xml + | + | The sections in this sample file are intended to give you a running start at + | getting the most out of your Maven installation. Where appropriate, the default + | values (values used when the setting is not specified) are provided. + | + |--> +<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" + xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" + xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd"> + <!-- localRepository + | The path to the local repository maven will use to store artifacts. + | +| Default: \${user.home}/.m2/repository + <localRepository>/path/to/local/repo</localRepository> + --> + + <!-- interactiveMode + | This will determine whether maven prompts you when it needs input. If set to false, + | maven will use a sensible default value, perhaps based on some other setting, for + | the parameter in question. + | + | Default: true + <interactiveMode>true</interactiveMode> + --> + + <!-- offline + | Determines whether maven should attempt to connect to the network when executing a build. + | This will have an effect on artifact downloads, artifact deployment, and others. + | + | Default: false + <offline>false</offline> + --> + + <!-- pluginGroups + | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e. + | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers + | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list. + |--> + <pluginGroups> + <!-- pluginGroup + | Specifies a further group identifier to use for plugin lookup. + <pluginGroup>com.your.plugins</pluginGroup> + --> + </pluginGroups> + + <!-- proxies + | This is a list of proxies which can be used on this machine to connect to the network. + | Unless otherwise specified (by system property or command-line switch), the first proxy + | specification in this list marked as active will be used. + |--> + <proxies> + <!-- proxy + | Specification for one proxy, to be used in connecting to the network. + | + <proxy> + <id>optional</id> + <active>true</active> + <protocol>http</protocol> + <username>proxyuser</username> + <password>proxypass</password> + <host>proxy.host.net</host> + <port>80</port> + <nonProxyHosts>local.net|some.host.com</nonProxyHosts> + </proxy> + --> + </proxies> + + <!-- servers + | This is a list of authentication profiles, keyed by the server-id used within the system. + | Authentication profiles can be used whenever maven must make a connection to a remote server. + |--> + <servers> + <!-- server + | Specifies the authentication information to use when connecting to a particular server, identified by + | a unique name within the system (referred to by the 'id' attribute below). + | + | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are + | used together. + | + <server> + <id>deploymentRepo</id> + <username>repouser</username> + <password>repopwd</password> + </server> + --> + + <!-- Another sample, using keys to authenticate. + <server> + <id>siteServer</id> + <privateKey>/path/to/private/key</privateKey> + <passphrase>optional; leave empty if not used.</passphrase> + </server> + --> + </servers> + + <!-- mirrors + | This is a list of mirrors to be used in downloading artifacts from remote repositories. + | + | It works like this: a POM may declare a repository to use in resolving certain artifacts. + | However, this repository may have problems with heavy traffic at times, so people have mirrored + | it to several places. + | + | That repository definition will have a unique id, so we can create a mirror reference for that + | repository, to be used as an alternate download site. The mirror site will be the preferred + | server for that repository. + |--> + + <!-- profiles + | This is a list of profiles which can be activated in a variety of ways, and which can modify + | the build process. Profiles provided in the settings.xml are intended to provide local machine- + | specific paths and repository locations which allow the build to work in the local environment. + | + | For example, if you have an integration testing plugin - like cactus - that needs to know where + | your Tomcat instance is installed, you can provide a variable here such that the variable is + | dereferenced during the build process to configure the cactus plugin. + | + | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles + | section of this document (settings.xml) - will be discussed later. Another way essentially + | relies on the detection of a system property, either matching a particular value for the property, + | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a + | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'. + | Finally, the list of active profiles can be specified directly from the command line. + | + | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact + | repositories, plugin repositories, and free-form properties to be used as configuration + | variables for plugins in the POM. + | + |--> + + + + + + <profiles> + <profile> + + <id>10_nexus</id> + <!--Enable snapshots for the built in central repo to direct --> + <!--all requests to nexus via the mirror --> + <repositories> + <repository> + <id>10_nexus</id> + <url>http://repo.maven.apache.org/maven2/</url> + <releases><enabled>true</enabled></releases> + <snapshots><enabled>true</enabled></snapshots> + </repository> + </repositories> + + <pluginRepositories> + <pluginRepository> + <id>10_nexus</id> + <url>http://repo.maven.apache.org/maven2/</url> + <releases><enabled>true</enabled></releases> + <snapshots><enabled>true</enabled></snapshots> + </pluginRepository> + </pluginRepositories> + + </profile> + <profile> + <id>20_openecomp-public</id> + <repositories> + <repository> + <id>20_openecomp-public</id> + <name>20_openecomp-public</name> + <url>https://nexus.onap.org/content/repositories/public/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </repository> + </repositories> + <pluginRepositories> + <pluginRepository> + <id>20_openecomp-public</id> + <name>20_openecomp-public</name> + <url>https://nexus.onap.org/content/repositories/public/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </pluginRepository> + </pluginRepositories> + </profile> + <profile> + <id>30_openecomp-staging</id> + <repositories> + <repository> + <id>30_openecomp-staging</id> + <name>30_openecomp-staging</name> + <url>https://nexus.onap.org/content/repositories/staging/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </repository> + </repositories> + <pluginRepositories> + <pluginRepository> + <id>30_openecomp-staging</id> + <name>30_openecomp-staging</name> + <url>https://nexus.onap.org/content/repositories/staging/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </pluginRepository> + </pluginRepositories> + </profile> + <profile> + <id>40_openecomp-release</id> + <repositories> + <repository> + <id>40_openecomp-release</id> + <name>40_openecomp-release</name> + <url>https://nexus.onap.org/content/repositories/releases/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </repository> + </repositories> + <pluginRepositories> + <pluginRepository> + <id>40_openecomp-release</id> + <name>40_openecomp-release</name> + <url>https://nexus.onap.org/content/repositories/releases/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </pluginRepository> + </pluginRepositories> + </profile> + + <profile> + <id>50_openecomp-snapshots</id> + <repositories> + <repository> + <id>50_openecomp-snapshot</id> + <name>50_openecomp-snapshot</name> + <url>https://nexus.onap.org/content/repositories/snapshots/</url> + <releases> + <enabled>false</enabled> + </releases> + <snapshots> + <enabled>true</enabled> + </snapshots> + </repository> + </repositories> + <pluginRepositories> + <pluginRepository> + <id>50_openecomp-snapshot</id> + <name>50_openecomp-snapshot</name> + <url>https://nexus.onap.org/content/repositories/snapshots/</url> + <releases> + <enabled>false</enabled> + </releases> + <snapshots> + <enabled>true</enabled> + </snapshots> + </pluginRepository> + </pluginRepositories> + </profile> + <profile> + <id>60_opendaylight-release</id> + <repositories> + <repository> + <id>60_opendaylight-mirror</id> + <name>60_opendaylight-mirror</name> + <url>https://nexus.opendaylight.org/content/repositories/public/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </repository> + </repositories> + <pluginRepositories> + <pluginRepository> + <id>60_opendaylight-mirror</id> + <name>60_opendaylight-mirror</name> + <url>https://nexus.opendaylight.org/content/repositories/public/</url> + <releases> + <enabled>true</enabled> + <updatePolicy>daily</updatePolicy> + </releases> + <snapshots> + <enabled>false</enabled> + </snapshots> + </pluginRepository> + </pluginRepositories> + </profile> + + <profile> + <id>70_opendaylight-snapshots</id> + <repositories> + <repository> + <id>70_opendaylight-snapshot</id> + <name>70_opendaylight-snapshot</name> + <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url> + <releases> + <enabled>false</enabled> + </releases> + <snapshots> + <enabled>true</enabled> + </snapshots> + </repository> + </repositories> + <pluginRepositories> + <pluginRepository> + <id>70_opendaylight-snapshot</id> + <name>70_opendaylight-snapshot</name> + <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url> + <releases> + <enabled>false</enabled> + </releases> + <snapshots> + <enabled>true</enabled> + </snapshots> + </pluginRepository> + </pluginRepositories> + </profile> + </profiles> + + <activeProfiles> + <activeProfile>10_nexus</activeProfile> + <activeProfile>20_openecomp-public</activeProfile> + <activeProfile>30_openecomp-staging</activeProfile> + <activeProfile>40_openecomp-release</activeProfile> + <activeProfile>50_openecomp-snapshots</activeProfile> + <activeProfile>60_opendaylight-release</activeProfile> + <activeProfile>70_opendaylight-snapshots</activeProfile> + + </activeProfiles> + +</settings> +EOF + cd /opt/authz -#Need to update /usr/share/maven/conf/settings.xml mvn install -Dmaven.test.skip=true # Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes diff --git a/boot/music_vm_init.sh b/boot/music_vm_init.sh index 372cd33e..2241ed13 100644 --- a/boot/music_vm_init.sh +++ b/boot/music_vm_init.sh @@ -14,4 +14,11 @@ docker pull $NEXUS_DOCKER_REPO/onap/music/music:$DOCKER_IMAGE_VERSION cd /opt/music/distribution/dockermusic git pull + +#Stop existing docker containers (if any) +if [ $(docker ps | wc -l) > 1 ]; then + ./music.sh stop + sleep 2 +fi + ./music.sh start
\ No newline at end of file |