aboutsummaryrefslogtreecommitdiffstats
path: root/boot
diff options
context:
space:
mode:
authorMarco Platania <platania@research.att.com>2018-04-16 17:40:02 -0400
committerMarco Platania <platania@research.att.com>2018-04-16 17:40:02 -0400
commitd60cdf2bd31e6a8143aa5bc36ec7b12414c68523 (patch)
treef21b843079145b0dde5935be8283c03094571963 /boot
parent3fbdd9d7c13c4666a46f6b70884c2c509138b92f (diff)
Improve ONAP installation with Heat
- Stop Music containers before starting new ones - Update maven settings.xml in aaf_install Change-Id: I96f5c1a3c403f1b55ecf91c67f6929ca141fbfcb Issue-ID: INT-444 Signed-off-by: Marco Platania <platania@research.att.com>
Diffstat (limited to 'boot')
-rw-r--r--boot/aaf_install.sh400
-rw-r--r--boot/music_vm_init.sh7
2 files changed, 406 insertions, 1 deletions
diff --git a/boot/aaf_install.sh b/boot/aaf_install.sh
index bc7e28e5..0378a4e7 100644
--- a/boot/aaf_install.sh
+++ b/boot/aaf_install.sh
@@ -98,8 +98,406 @@ chmod +x /opt/authz/auth/auth-cass/docker/dinstall.sh
chmod +x /opt/authz/auth/docker/drun.sh
chmod +x /opt/authz/auth/docker/d.props
+#Update maven settings
+cat > /usr/share/maven/conf/settings.xml << EOF
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements. See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership. The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied. See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+
+<!--
+ | This is the configuration file for Maven. It can be specified at two levels:
+ |
+ | 1. User Level. This settings.xml file provides configuration for a single user,
+| and is normally provided in \${user.home}/.m2/settings.xml.
+ |
+ | NOTE: This location can be overridden with the CLI option:
+ |
+ | -s /path/to/user/settings.xml
+ |
+ | 2. Global Level. This settings.xml file provides configuration for all Maven
+ | users on a machine (assuming they're all using the same Maven
+ | installation). It's normally provided in
+| \${maven.home}/conf/settings.xml.
+ |
+ | NOTE: This location can be overridden with the CLI option:
+ |
+ | -gs /path/to/global/settings.xml
+ |
+ | The sections in this sample file are intended to give you a running start at
+ | getting the most out of your Maven installation. Where appropriate, the default
+ | values (values used when the setting is not specified) are provided.
+ |
+ |-->
+<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
+ xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+ xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
+ <!-- localRepository
+ | The path to the local repository maven will use to store artifacts.
+ |
+| Default: \${user.home}/.m2/repository
+ <localRepository>/path/to/local/repo</localRepository>
+ -->
+
+ <!-- interactiveMode
+ | This will determine whether maven prompts you when it needs input. If set to false,
+ | maven will use a sensible default value, perhaps based on some other setting, for
+ | the parameter in question.
+ |
+ | Default: true
+ <interactiveMode>true</interactiveMode>
+ -->
+
+ <!-- offline
+ | Determines whether maven should attempt to connect to the network when executing a build.
+ | This will have an effect on artifact downloads, artifact deployment, and others.
+ |
+ | Default: false
+ <offline>false</offline>
+ -->
+
+ <!-- pluginGroups
+ | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
+ | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
+ | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
+ |-->
+ <pluginGroups>
+ <!-- pluginGroup
+ | Specifies a further group identifier to use for plugin lookup.
+ <pluginGroup>com.your.plugins</pluginGroup>
+ -->
+ </pluginGroups>
+
+ <!-- proxies
+ | This is a list of proxies which can be used on this machine to connect to the network.
+ | Unless otherwise specified (by system property or command-line switch), the first proxy
+ | specification in this list marked as active will be used.
+ |-->
+ <proxies>
+ <!-- proxy
+ | Specification for one proxy, to be used in connecting to the network.
+ |
+ <proxy>
+ <id>optional</id>
+ <active>true</active>
+ <protocol>http</protocol>
+ <username>proxyuser</username>
+ <password>proxypass</password>
+ <host>proxy.host.net</host>
+ <port>80</port>
+ <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
+ </proxy>
+ -->
+ </proxies>
+
+ <!-- servers
+ | This is a list of authentication profiles, keyed by the server-id used within the system.
+ | Authentication profiles can be used whenever maven must make a connection to a remote server.
+ |-->
+ <servers>
+ <!-- server
+ | Specifies the authentication information to use when connecting to a particular server, identified by
+ | a unique name within the system (referred to by the 'id' attribute below).
+ |
+ | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
+ | used together.
+ |
+ <server>
+ <id>deploymentRepo</id>
+ <username>repouser</username>
+ <password>repopwd</password>
+ </server>
+ -->
+
+ <!-- Another sample, using keys to authenticate.
+ <server>
+ <id>siteServer</id>
+ <privateKey>/path/to/private/key</privateKey>
+ <passphrase>optional; leave empty if not used.</passphrase>
+ </server>
+ -->
+ </servers>
+
+ <!-- mirrors
+ | This is a list of mirrors to be used in downloading artifacts from remote repositories.
+ |
+ | It works like this: a POM may declare a repository to use in resolving certain artifacts.
+ | However, this repository may have problems with heavy traffic at times, so people have mirrored
+ | it to several places.
+ |
+ | That repository definition will have a unique id, so we can create a mirror reference for that
+ | repository, to be used as an alternate download site. The mirror site will be the preferred
+ | server for that repository.
+ |-->
+
+ <!-- profiles
+ | This is a list of profiles which can be activated in a variety of ways, and which can modify
+ | the build process. Profiles provided in the settings.xml are intended to provide local machine-
+ | specific paths and repository locations which allow the build to work in the local environment.
+ |
+ | For example, if you have an integration testing plugin - like cactus - that needs to know where
+ | your Tomcat instance is installed, you can provide a variable here such that the variable is
+ | dereferenced during the build process to configure the cactus plugin.
+ |
+ | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
+ | section of this document (settings.xml) - will be discussed later. Another way essentially
+ | relies on the detection of a system property, either matching a particular value for the property,
+ | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
+ | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
+ | Finally, the list of active profiles can be specified directly from the command line.
+ |
+ | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
+ | repositories, plugin repositories, and free-form properties to be used as configuration
+ | variables for plugins in the POM.
+ |
+ |-->
+
+
+
+
+
+ <profiles>
+ <profile>
+
+ <id>10_nexus</id>
+ <!--Enable snapshots for the built in central repo to direct -->
+ <!--all requests to nexus via the mirror -->
+ <repositories>
+ <repository>
+ <id>10_nexus</id>
+ <url>http://repo.maven.apache.org/maven2/</url>
+ <releases><enabled>true</enabled></releases>
+ <snapshots><enabled>true</enabled></snapshots>
+ </repository>
+ </repositories>
+
+ <pluginRepositories>
+ <pluginRepository>
+ <id>10_nexus</id>
+ <url>http://repo.maven.apache.org/maven2/</url>
+ <releases><enabled>true</enabled></releases>
+ <snapshots><enabled>true</enabled></snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+
+ </profile>
+ <profile>
+ <id>20_openecomp-public</id>
+ <repositories>
+ <repository>
+ <id>20_openecomp-public</id>
+ <name>20_openecomp-public</name>
+ <url>https://nexus.onap.org/content/repositories/public/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>20_openecomp-public</id>
+ <name>20_openecomp-public</name>
+ <url>https://nexus.onap.org/content/repositories/public/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+ <profile>
+ <id>30_openecomp-staging</id>
+ <repositories>
+ <repository>
+ <id>30_openecomp-staging</id>
+ <name>30_openecomp-staging</name>
+ <url>https://nexus.onap.org/content/repositories/staging/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>30_openecomp-staging</id>
+ <name>30_openecomp-staging</name>
+ <url>https://nexus.onap.org/content/repositories/staging/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+ <profile>
+ <id>40_openecomp-release</id>
+ <repositories>
+ <repository>
+ <id>40_openecomp-release</id>
+ <name>40_openecomp-release</name>
+ <url>https://nexus.onap.org/content/repositories/releases/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>40_openecomp-release</id>
+ <name>40_openecomp-release</name>
+ <url>https://nexus.onap.org/content/repositories/releases/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+
+ <profile>
+ <id>50_openecomp-snapshots</id>
+ <repositories>
+ <repository>
+ <id>50_openecomp-snapshot</id>
+ <name>50_openecomp-snapshot</name>
+ <url>https://nexus.onap.org/content/repositories/snapshots/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>50_openecomp-snapshot</id>
+ <name>50_openecomp-snapshot</name>
+ <url>https://nexus.onap.org/content/repositories/snapshots/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+ <profile>
+ <id>60_opendaylight-release</id>
+ <repositories>
+ <repository>
+ <id>60_opendaylight-mirror</id>
+ <name>60_opendaylight-mirror</name>
+ <url>https://nexus.opendaylight.org/content/repositories/public/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>60_opendaylight-mirror</id>
+ <name>60_opendaylight-mirror</name>
+ <url>https://nexus.opendaylight.org/content/repositories/public/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>daily</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+
+ <profile>
+ <id>70_opendaylight-snapshots</id>
+ <repositories>
+ <repository>
+ <id>70_opendaylight-snapshot</id>
+ <name>70_opendaylight-snapshot</name>
+ <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </repository>
+ </repositories>
+ <pluginRepositories>
+ <pluginRepository>
+ <id>70_opendaylight-snapshot</id>
+ <name>70_opendaylight-snapshot</name>
+ <url>https://nexus.opendaylight.org/content/repositories/opendaylight.snapshot/</url>
+ <releases>
+ <enabled>false</enabled>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ </snapshots>
+ </pluginRepository>
+ </pluginRepositories>
+ </profile>
+ </profiles>
+
+ <activeProfiles>
+ <activeProfile>10_nexus</activeProfile>
+ <activeProfile>20_openecomp-public</activeProfile>
+ <activeProfile>30_openecomp-staging</activeProfile>
+ <activeProfile>40_openecomp-release</activeProfile>
+ <activeProfile>50_openecomp-snapshots</activeProfile>
+ <activeProfile>60_opendaylight-release</activeProfile>
+ <activeProfile>70_opendaylight-snapshots</activeProfile>
+
+ </activeProfiles>
+
+</settings>
+EOF
+
cd /opt/authz
-#Need to update /usr/share/maven/conf/settings.xml
mvn install -Dmaven.test.skip=true
# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes
diff --git a/boot/music_vm_init.sh b/boot/music_vm_init.sh
index 372cd33e..2241ed13 100644
--- a/boot/music_vm_init.sh
+++ b/boot/music_vm_init.sh
@@ -14,4 +14,11 @@ docker pull $NEXUS_DOCKER_REPO/onap/music/music:$DOCKER_IMAGE_VERSION
cd /opt/music/distribution/dockermusic
git pull
+
+#Stop existing docker containers (if any)
+if [ $(docker ps | wc -l) > 1 ]; then
+ ./music.sh stop
+ sleep 2
+fi
+
./music.sh start \ No newline at end of file